summaryrefslogtreecommitdiff
path: root/drivers/bluetooth/btmtkuart.c
AgeCommit message (Collapse)Author
2019-07-06Bluetooth: btmtkuart: add an implementation for clock osc propertySean Wang
Some board requires explicitily control external osscilator via GPIO. So, add an implementation of a clock property for an external oscillator to the device. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btmtkuart: add an implementation for boot-gpios propertySean Wang
Not every platform has the pinctrl device integrates the GPIO the function such as MT7621 whose pinctrl and GPIO are separate hardware so the driver adds additional boot-gpios to let the MT766[3,8]U can enter the proper boot mode by gpiod for such platform. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: mediatek: Fixed incorrect type in assignmentSean Wang
Fixed warning: incorrect type in assignment reported by kbuild test robot. The detailed warning is shown as below. make ARCH=x86_64 allmodconfig make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' All warnings (new ones prefixed by >>): btmtkuart.c:671:18: sparse: warning: incorrect type in assignment (different base types) btmtkuart.c:671:18: sparse: expected unsigned int [usertype] baudrate btmtkuart.c:671:18: sparse: got restricted __le32 [usertype] sparse warnings: (new ones prefixed by >>) btmtkuart.c:671:18: sparse: warning: incorrect type in assignment (different base types) btmtkuart.c:671:18: sparse: expected unsigned int [usertype] baudrate btmtkuart.c:671:18: sparse: got restricted __le32 [usertype] vim +671 drivers/bluetooth/btmtkuart.c 659 660 static int btmtkuart_change_baudrate(struct hci_dev *hdev) 661 { 662 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 663 struct btmtk_hci_wmt_params wmt_params; 664 u32 baudrate; 665 u8 param; 666 int err; 667 668 /* Indicate the device to enter the probe state the host is 669 * ready to change a new baudrate. 670 */ > 671 baudrate = cpu_to_le32(bdev->desired_speed); 672 wmt_params.op = MTK_WMT_HIF; Fixes: 22eaf6c9946a ("Bluetooth: mediatek: add support for MediaTek MT7663U and MT7668U UART devices") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-03-02Bluetooth: mediatek: add support for MediaTek MT7663U and MT7668U UART devicesSean Wang
This adds the support of enabling MT7663U and MT7668U Bluetooth function running on the top of btmtkuart driver. There are a few differences between MT766[3,8]U and MT7622 where MT766[3,8]U are standalone devices based on UART transport while MT7622 bluetooth is a built-in device on MediaTek SoC communicating with the host through BTIF serial transport. Thus, extra setup sequence is necessary for these standalone devices such as remote regulator and reset control via GPIO, baud rate changing handshake between the host and device and so on. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-18Bluetooth: mediatek: update the common setup between MT7622 and other devicesSean Wang
Update the setup sequence on MT7622 to apply the same flow with MT7663U and MT7668U USB [1] as much as possible. These additional commands are required to parse the corresponding event to determine what current state the Bluetooth device is on and thus it's necessary to extend mtk_hci_wmt_sync to support the reading status in the same patch. [1] http://lists.infradead.org/pipermail/linux-mediatek/2019-January/017074.html Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-18Bluetooth: mediatek: pass a pointer to mtk_hci_wmt_syncSean Wang
Pass a structure pointer to mtk_hci_wmt_sync rather than several arguments to avoid take up additional stack area and be better to read the code. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-18Bluetooth: mediatek: fix up an error path to restore bdev->tx_stateSean Wang
Restore bdev->tx_state with clearing bit BTMTKUART_TX_WAIT_VND_EVT when there is an error on waiting for the corresponding event. Fixes: 7237c4c9ec92 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-18Bluetooth: mediatek: trivial typo fixSean Wang
add a trivial typo fix from speicfic to specific Fixes: 7237c4c9ec92 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-21Bluetooth: mediatek: Fix memory leakGustavo A. R. Silva
In case memory resources for *fw* were allocated, release them before return. Addresses-Coverity-ID: 1472611 ("Resource leak") Fixes: 7237c4c9ec92 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-13Bluetooth: mediatek: pass correct size to h4_recv_buf()Dan Carpenter
We're supposed to pass the number of elements in the mtk_recv_pkts, not the number of bytes. Fixes: 7237c4c9ec92 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-07Bluetooth: mediatek: Add protocol support for MediaTek serial devicesSean Wang
This adds a driver based on serdev driver for the MediaTek serial protocol based on running H:4, which can enable the built-in Bluetooth device inside MT7622 SoC. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>