summaryrefslogtreecommitdiff
path: root/drivers/bluetooth/btrtl.c
AgeCommit message (Collapse)Author
2024-03-06Bluetooth: btrtl: Add the support for RTL8852BT/RTL8852BE-VTMax Chou
Add the support for RTL8852BT/RTL8852BE-VT BT controller on USB interface. The necessary firmware will be submitted to linux-firmware project. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 8 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=8520 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-13Bluetooth: btrtl: Ignore error return for hci_devcd_register()Max Chou
If CONFIG_DEV_COREDUMP was not set, it would return -EOPNOTSUPP for hci_devcd_register(). In this commit, ignore error return for hci_devcd_register(). Otherwise Bluetooth initialization will be failed. Fixes: 044014ce85a1 ("Bluetooth: btrtl: Add Realtek devcoredump support") Cc: stable@vger.kernel.org Reported-by: Kirill A. Shutemov <kirill@shutemov.name> Closes: https://lore.kernel.org/all/ZRyqIn0_qqEFBPdy@debian.me/T/ Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852CMax Chou
In this commit, prefer to load FW v2 if available. Fallback to FW v1 otherwise. This behavior is only for RTL8852C. Fixes: 9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support") Cc: stable@vger.kernel.org Suggested-by: Juerg Haefliger <juerg.haefliger@canonical.com> Tested-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: msft: Extended monitor tracking by address filterHilda Wu
Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btrtl: Correct the length of the HCI command for drop fwMax Chou
The original code did not determine the length value of the HCI command for drop fw even there's no parameter needed. In this commit, use struct hci_command_hdr to manage opcode and length. It would be more regular and more readable. Suggested-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btrtl: Add Realtek devcoredump supportHilda Wu
Catch debug exception from controller and driver, and trigger a devcoredump using hci devcoredump APIs. The debug exception data will be parsed in userspace. Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-06-29Bluetooth: btrtl: Add missing MODULE_FIRMWARE declarationsDan Gora
Add missing MODULE_FIRMWARE declarations for firmware referenced in btrtl.c. Signed-off-by: Dan Gora <dan.gora@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-23Bluetooth: btrtl: Add the support for RTL8851BMax Chou
Add the support for RTL8851B BT controller on USB interface. The necessary firmware will be submitted to linux-firmware project. Note that the Bluetooth devices WITH the VID=0x0bda would be set the feature quirk in btrtl_setup_realtek(). It's able to ignore the feature flag set for the specific VID and PID in blacklist_table[] of btusb.c. (check [1]) If Realtek Bluetooth chips WITHOUT the VID=0x0bda, it shall be added the feature flag for the specific VID and PID in blacklist_table[] of btusb.c. (check [2]) [1] '9ab9235fe5cf ("Bluetooth: btrtl: Enable WBS for the specific Realtek devices")' [2] '73280f13c9bb ("Bluetooth: btusb: Add the more support IDs for Realtek RTL8822CE")' The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 33 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b851 Rev= 0.00 S: Manufacturer=Realtek S: Product=802.11ax WLAN Adapter S: SerialNumber=00E04C885A01 C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btrtl: Firmware format v2 supportMax Chou
Realtek changed the format of the firmware file as v2. The driver should implement the patch to extract the firmware data from the firmware file. The future chips must apply this patch for firmware loading. This patch is compatible with the both previous format and v2 as well. Signed-off-by: Allen Chen <allen_chen@realsil.com.cn> Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Tested-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btrtl: check for NULL in btrtl_set_quirks()Max Chou
The btrtl_set_quirks() has accessed btrtl_dev->ic_info->lmp_subver since b8e482d02513. However, if installing a Realtek Bluetooth controller without the driver supported, it will hit the NULL point accessed. Add a check for NULL to avoid the Kernel Oops. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btrtl: add support for the RTL8723CSVasily Khoruzhick
The Realtek RTL8723CS is a SDIO WiFi chip. It also contains a Bluetooth module which is connected via UART to the host. It shares lmp subversion with 8703B, so Realtek's userspace initialization tool (rtk_hciattach) differentiates varieties of RTL8723CS (CG, VF, XX) with RTL8703B using vendor's command to read chip type. Also this chip declares support for some features it doesn't support so add a quirk to indicate that these features are broken. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Bastian Germann <bage@debian.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_h5: btrtl: Add support for RTL8821CSChris Morgan
RTL8821CS is a WiFi + Bluetooth combo chip from Realtek that provides WiFi A/B/G/N/AC over an SDIO interface and Bluetooth 4.2 over a UART interface. Note that the firmware this was tested with was firmware version 0x75b8f098. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btrtl: Add support for RTL8852BSVictor Hassan
Add the support for RTL8852BS BT controller on UART interface. The necessary firmware file will be submitted to linux-firmware. Signed-off-by: Victor Hassan <victor@allwinnertech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-12Bluetooth: btusb: Ignore zero length of USB packets on ALT 6 for specific chipHilda Wu
For USB ALT 6 settings some Realtek chips need to transmit mSBC data continuously without the zero length of USB packets. In this commit, create BTUSB_ALT6_CONTINUOUS_TX to manage the behavior. Therefore, create REALTEK_ALT6_CONTINUOUS_TX_CHIP to manage the specific chip model for the behavior. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: btrtl: Fix typo in commentshaomin Deng
Delete the repeated word "that" in comments. Signed-off-by: shaomin Deng <dengshaomin@cdjrlc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-05-13Bluetooth: btrtl: Add support for RTL8852CMax Chou
Add the support for RTL8852C BT controller on USB interface. The necessary firmware file will be submitted to linux-firmware. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btrtl: Add support for RTL8852BMax Chou
Add the support for RTL8852B BT controller on USB interface. The necessary firmware file will be submitted to linux-firmware. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-26Bluetooth: btrtl: Add support for RTL8822C hci_ver 0x08Vyacheslav Bocharov
Add a variation of RTL8822CS with hci_ver = 0x08. This is fully similar to RTL8822CS with hci_ver = 0x0a observed on the Tanix TX6 Android set-top box and JetHome JetHub H1. Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in> Signed-off-by: Rudi Heitbaum <rudi@heitbaum.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-01Bluetooth: btrtl: Ask ic_info to drop firmwareHilda Wu
Some un-support wakeup platforms keep USB power and suspend signal is coming late, this makes Realtek some chip keep its firmware, and make it never load new firmware. So use vendor specific HCI command to ask them drop its firmware after system shutdown or resume. Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-30Bluetooth: btrtl: Add support for MSFT extension to rtl8821c devicesMarcel Holtmann
The rtl8821c class of Realtek devices does support the Microsoft extensions and thus enable them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-28Bluetooth: btrtl: Set VsMsftOpCode based on device tableMarcel Holtmann
The device table already has the option to hold device specific details and thus include the support for Microsoft extensions there as well. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-28Bluetooth: btrtl: enable Realtek 8822C/8852A to support AOSP extensionJoseph Hwang
This patch enables Realtek 8822C and 8852A to support the AOSP extension. Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Joseph Hwang <josephsih@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-22Bluetooth: btrtl: Set MSFT opcode for RTL8852Archie Pusaka
RTL8852 support MSFT HCI extension, therefore set the proper MSFT opcode. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: btrtl: rename USB fw for RTL8761Joakim Tjernlund
According Realteks own BT drivers firmware RTL8761B is for UART and RTL8761BU is for USB. Change existing 8761B to UART and add an 8761BU entry for USB Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: hci_h5: Add RTL8822CS capabilitiesArchie Pusaka
RTL8822 chipset supports WBS, and this information is conveyed in btusb.c. However, the UART driver doesn't have this information just yet. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-29Bluetooth: btrtl: Enable WBS for the specific Realtek devicesMax Chou
By this change, it will enable WBS supported on the specific Realtek BT devices, such as RTL8822C and RTL8852A. In the future, it's able to maintain what the Realtek devices support WBS here. Tested-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-06Bluetooth: btrtl: Add null check in setupAbhishek Pandit-Subedi
btrtl_dev->ic_info is only available from the controller on cold boot (the lmp subversion matches the device model and this is used to look up the ic_info). On warm boots (firmware already loaded), btrtl_dev->ic_info is null. Fixes: 05672a2c14a4 (Bluetooth: btrtl: Enable central-peripheral role) Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-22Bluetooth: btrtl: Enable central-peripheral roleAbhishek Pandit-Subedi
Enable the central-peripheral role on RTL8822CE. This enables creating connections while there is an existing connection in the slave role. This change can be confirmed in userspace via `bluetoothctl show` which will now show "Roles: central-peripheral". Reviewed-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-18Bluetooth: btrtl: Enable MSFT extension for RTL8822CE controllerMiao-chen Chou
The Realtek RTL8822CE Bluetooth controller support Microsoft vendor extension and it uses 0xFCF0 for VsMsftOpCode. The following test step was performed. - Boot the test device with RTL8822CE and verify the INFO print in dmesg. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-11Bluetooth: btrtl: fix incorrect skb allocation failure checkColin Ian King
Currently the check for a failed bt_skb_alloc allocation is incorrectly checking using IS_ERR and this can lead to a null pointer dereference. Fix this by checking for a null pointer return using the !skb idiom. Addresses-Coverity: ("Dereference null return") Fixes: 1996d9cad6ad ("Bluetooth: btrtl: Ask 8821C to drop old firmware") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-10Bluetooth: btusb: btrtl: Add support for RTL8852AMax Chou
Add the support for RTL8852A BT controller on USB interface. The necessary firmware will be submitted to linux-firmware project. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 10 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=c852 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-09Bluetooth: btrtl: Ask 8821C to drop old firmwareKai-Heng Feng
Some platforms keep USB power even when they are powered off and in S5, this makes Realtek 8821C keep its firmware even after a cold boot, and make 8821C never load new firmware. So use vendor specific HCI command to ask 8821C drop its firmware after system shutdown. Newer firmware doesn't have this issue so we only use this trick for old 8821C firmware version. Suggested-by: Max Chou <max.chou@realtek.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-09Bluetooth: btrtl: Refine the ic_id_table for clearer and more regularMax Chou
Enhance the ic_id_table that it's able to maintain regularly. To judge which chip should be initialized by LMP subversion, HCI revision, HCI version and HCI bus which were given in the ic_id_table. Also, refine the incorrect LMP subversion of ROM for RTL8723D and RTL8723A. Suggested-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-11Bluetooth: btrtl: Add support for RTL8761BZiqian SUN (Zamir)
Add new compatible device RTL8761B. RTL8761B is a USB Bluetooth device, with support of BLE and BR/EDR. The USB info is T: Bus=03 Lev=04 Prnt=04 Port=00 Cnt=01 Dev#= 29 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=8771 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=XXXXXXXXXXXX C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Ziqian SUN (Zamir) <sztsian@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-18Bluetooth: hci_h5: btrtl: Add support for RTL8822CMax Chou
Add new compatible and FW loading support for RTL8822C. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-24Bluetooth: btrtl: Use kvmalloc for FW allocationsMaxim Mikityanskiy
Currently, kmemdup is applied to the firmware data, and it invokes kmalloc under the hood. The firmware size and patch_length are big (more than PAGE_SIZE), and on some low-end systems (like ASUS E202SA) kmalloc may fail to allocate a contiguous chunk under high memory usage and fragmentation: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000a lmp_ver=06 lmp_subver=8821 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: loading rtl_bt/rtl8821a_fw.bin kworker/u9:2: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0 <stack trace follows> As firmware load happens on each resume, Bluetooth will stop working after several iterations, when the kernel fails to allocate an order-4 page. This patch replaces kmemdup with kvmalloc+memcpy. It's not required to have a contiguous chunk here, because it's not mapped to the device directly. Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-26Bluetooth: btrtl: remove unneeded semicolonYueHaibing
Remove unneeded semicolon. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-16Bluetooth: btrtl: Fix an issue for the incorrect error return code.Max Chou
It does not need the '-' for PTR_ERR(skb) because PTR_ERR(skb) will return the negative value during errors. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: btrtl: Fix an issue that failing to download the FW which size is ↵Max Chou
over 32K bytes Fix the issue that when the FW size is 32K+, it will fail for the download process because of the incorrect index. When firmware patch length is over 32K, "dl_cmd->index" may >= 0x80. It will be thought as "data end" that download process will not complete. However, driver should recount the index from 1. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: btrtl: Remove trailing newline from calls to rtl_dev macrosAlex Lu
These printing macros already add a trailing newline, so drop these unnecessary additional newlines. Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: btrtl: Remove redundant prefix from calls to rtl_dev macrosAlex Lu
the rtl: or RTL: prefix in the string is pointless. The rtl_dev_* macros already does that. Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: btrtl: Add firmware version printAlex Lu
This patch is used to print fw version for debug convenience Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: btrtl: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERYAlex Lu
Realtek Bluetooth controllers can do both LE scan and BR/EDR inquiry at once, need to set HCI_QUIRK_SIMULTANEOUS_DISCOVERY quirk. Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth:: btrtl: Add support for RTL8723DULarry Finger
This device is functionally equivalent to the BT part of the RTL8723DE, uses the same firmware, but the LMP subversion and HCI revision are unique. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btrtl: HCI reset on close for Realtek BT chipJian-Hong Pan
Realtek RTL8822BE BT chip on ASUS X420FA cannot be turned on correctly after on-off several times. Bluetooth daemon sets BT mode failed when this issue happens. Scanning must be active while turning off for this bug to be hit. bluetoothd[1576]: Failed to set mode: Failed (0x03) If BT is turned off, then turned on again, it works correctly again. According to the vendor driver, the HCI_QUIRK_RESET_ON_CLOSE flag is set during probing. So, this patch makes Realtek's BT reset on close to fix this issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203429 Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Reviewed-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-28Bluetooth: btrtl: Restore old logic to assume firmware is already loadedKai-Heng Feng
Realtek bluetooth may not work after reboot: [ 12.446130] Bluetooth: hci0: RTL: rtl: unknown IC info, lmp subver a99e, hci rev 826c, hci ver 0008 This is a regression introduced by commit 26503ad25de8 ("Bluetooth: btrtl: split the device initialization into smaller parts"). The new logic errors out early when no matching IC info can be found, in this case it means the firmware is already loaded. So let's assume the firmware is already loaded when we can't find matching IC info, like the old logic did. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201921 Fixes: 26503ad25de8 ("Bluetooth: btrtl: split the device initialization into smaller parts") Cc: stable@vger.kernel.org # 4.19+ Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: btrtl: Add support for RTL8822C with USB interfaceAlex Lu
This device is included in the RTL8822CU combination wifi and BT part, as well as the BT part of the RTL8822CE. The necessary firmware has been submitted to the linux-firmware project. Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: btrtl: Make array extension_sig static, shrinks object sizeColin Ian King
Don't populate the array extension_sig on the stack but instead make it static. Makes the object code smaller by 75 bytes: Before: text data bss dec hex filename 14325 4920 0 19245 4b2d drivers/bluetooth/btrtl.o After: text data bss dec hex filename 14186 4984 0 19170 4ae2 drivers/bluetooth/btrtl.o (gcc version 8.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btrtl: Add support for a config filename postfixHans de Goede
The contents of the rtl_bt/rtlXXXX_config.bin file may be board specific allow the caller of btrtl_initialize to specify a postfix identifying the board, which if specified will make btrtl_initialize look for rtl_bt/rtlXXXX_config-<postfix>.bin instead. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit (git 2.34.1) at 2024-06-11 13:25:22 +0000