summaryrefslogtreecommitdiff
path: root/drivers/bluetooth/btrtl.c
AgeCommit message (Collapse)Author
2021-10-01Bluetooth: btrtl: Ask ic_info to drop firmwareHilda Wu
Some un-support wakeup platforms keep USB power and suspend signal is coming late, this makes Realtek some chip keep its firmware, and make it never load new firmware. So use vendor specific HCI command to ask them drop its firmware after system shutdown or resume. Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-30Bluetooth: btrtl: Add support for MSFT extension to rtl8821c devicesMarcel Holtmann
The rtl8821c class of Realtek devices does support the Microsoft extensions and thus enable them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-28Bluetooth: btrtl: Set VsMsftOpCode based on device tableMarcel Holtmann
The device table already has the option to hold device specific details and thus include the support for Microsoft extensions there as well. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-28Bluetooth: btrtl: enable Realtek 8822C/8852A to support AOSP extensionJoseph Hwang
This patch enables Realtek 8822C and 8852A to support the AOSP extension. Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Joseph Hwang <josephsih@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-22Bluetooth: btrtl: Set MSFT opcode for RTL8852Archie Pusaka
RTL8852 support MSFT HCI extension, therefore set the proper MSFT opcode. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: btrtl: rename USB fw for RTL8761Joakim Tjernlund
According Realteks own BT drivers firmware RTL8761B is for UART and RTL8761BU is for USB. Change existing 8761B to UART and add an 8761BU entry for USB Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: hci_h5: Add RTL8822CS capabilitiesArchie Pusaka
RTL8822 chipset supports WBS, and this information is conveyed in btusb.c. However, the UART driver doesn't have this information just yet. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-29Bluetooth: btrtl: Enable WBS for the specific Realtek devicesMax Chou
By this change, it will enable WBS supported on the specific Realtek BT devices, such as RTL8822C and RTL8852A. In the future, it's able to maintain what the Realtek devices support WBS here. Tested-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-06Bluetooth: btrtl: Add null check in setupAbhishek Pandit-Subedi
btrtl_dev->ic_info is only available from the controller on cold boot (the lmp subversion matches the device model and this is used to look up the ic_info). On warm boots (firmware already loaded), btrtl_dev->ic_info is null. Fixes: 05672a2c14a4 (Bluetooth: btrtl: Enable central-peripheral role) Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-22Bluetooth: btrtl: Enable central-peripheral roleAbhishek Pandit-Subedi
Enable the central-peripheral role on RTL8822CE. This enables creating connections while there is an existing connection in the slave role. This change can be confirmed in userspace via `bluetoothctl show` which will now show "Roles: central-peripheral". Reviewed-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-18Bluetooth: btrtl: Enable MSFT extension for RTL8822CE controllerMiao-chen Chou
The Realtek RTL8822CE Bluetooth controller support Microsoft vendor extension and it uses 0xFCF0 for VsMsftOpCode. The following test step was performed. - Boot the test device with RTL8822CE and verify the INFO print in dmesg. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-11Bluetooth: btrtl: fix incorrect skb allocation failure checkColin Ian King
Currently the check for a failed bt_skb_alloc allocation is incorrectly checking using IS_ERR and this can lead to a null pointer dereference. Fix this by checking for a null pointer return using the !skb idiom. Addresses-Coverity: ("Dereference null return") Fixes: 1996d9cad6ad ("Bluetooth: btrtl: Ask 8821C to drop old firmware") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-10Bluetooth: btusb: btrtl: Add support for RTL8852AMax Chou
Add the support for RTL8852A BT controller on USB interface. The necessary firmware will be submitted to linux-firmware project. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 10 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=c852 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-09Bluetooth: btrtl: Ask 8821C to drop old firmwareKai-Heng Feng
Some platforms keep USB power even when they are powered off and in S5, this makes Realtek 8821C keep its firmware even after a cold boot, and make 8821C never load new firmware. So use vendor specific HCI command to ask 8821C drop its firmware after system shutdown. Newer firmware doesn't have this issue so we only use this trick for old 8821C firmware version. Suggested-by: Max Chou <max.chou@realtek.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-09Bluetooth: btrtl: Refine the ic_id_table for clearer and more regularMax Chou
Enhance the ic_id_table that it's able to maintain regularly. To judge which chip should be initialized by LMP subversion, HCI revision, HCI version and HCI bus which were given in the ic_id_table. Also, refine the incorrect LMP subversion of ROM for RTL8723D and RTL8723A. Suggested-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-11Bluetooth: btrtl: Add support for RTL8761BZiqian SUN (Zamir)
Add new compatible device RTL8761B. RTL8761B is a USB Bluetooth device, with support of BLE and BR/EDR. The USB info is T: Bus=03 Lev=04 Prnt=04 Port=00 Cnt=01 Dev#= 29 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=8771 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=XXXXXXXXXXXX C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Ziqian SUN (Zamir) <sztsian@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-18Bluetooth: hci_h5: btrtl: Add support for RTL8822CMax Chou
Add new compatible and FW loading support for RTL8822C. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-24Bluetooth: btrtl: Use kvmalloc for FW allocationsMaxim Mikityanskiy
Currently, kmemdup is applied to the firmware data, and it invokes kmalloc under the hood. The firmware size and patch_length are big (more than PAGE_SIZE), and on some low-end systems (like ASUS E202SA) kmalloc may fail to allocate a contiguous chunk under high memory usage and fragmentation: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000a lmp_ver=06 lmp_subver=8821 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: loading rtl_bt/rtl8821a_fw.bin kworker/u9:2: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0 <stack trace follows> As firmware load happens on each resume, Bluetooth will stop working after several iterations, when the kernel fails to allocate an order-4 page. This patch replaces kmemdup with kvmalloc+memcpy. It's not required to have a contiguous chunk here, because it's not mapped to the device directly. Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-26Bluetooth: btrtl: remove unneeded semicolonYueHaibing
Remove unneeded semicolon. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-16Bluetooth: btrtl: Fix an issue for the incorrect error return code.Max Chou
It does not need the '-' for PTR_ERR(skb) because PTR_ERR(skb) will return the negative value during errors. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: btrtl: Fix an issue that failing to download the FW which size is ↵Max Chou
over 32K bytes Fix the issue that when the FW size is 32K+, it will fail for the download process because of the incorrect index. When firmware patch length is over 32K, "dl_cmd->index" may >= 0x80. It will be thought as "data end" that download process will not complete. However, driver should recount the index from 1. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: btrtl: Remove trailing newline from calls to rtl_dev macrosAlex Lu
These printing macros already add a trailing newline, so drop these unnecessary additional newlines. Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: btrtl: Remove redundant prefix from calls to rtl_dev macrosAlex Lu
the rtl: or RTL: prefix in the string is pointless. The rtl_dev_* macros already does that. Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: btrtl: Add firmware version printAlex Lu
This patch is used to print fw version for debug convenience Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: btrtl: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERYAlex Lu
Realtek Bluetooth controllers can do both LE scan and BR/EDR inquiry at once, need to set HCI_QUIRK_SIMULTANEOUS_DISCOVERY quirk. Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth:: btrtl: Add support for RTL8723DULarry Finger
This device is functionally equivalent to the BT part of the RTL8723DE, uses the same firmware, but the LMP subversion and HCI revision are unique. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btrtl: HCI reset on close for Realtek BT chipJian-Hong Pan
Realtek RTL8822BE BT chip on ASUS X420FA cannot be turned on correctly after on-off several times. Bluetooth daemon sets BT mode failed when this issue happens. Scanning must be active while turning off for this bug to be hit. bluetoothd[1576]: Failed to set mode: Failed (0x03) If BT is turned off, then turned on again, it works correctly again. According to the vendor driver, the HCI_QUIRK_RESET_ON_CLOSE flag is set during probing. So, this patch makes Realtek's BT reset on close to fix this issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203429 Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Reviewed-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-28Bluetooth: btrtl: Restore old logic to assume firmware is already loadedKai-Heng Feng
Realtek bluetooth may not work after reboot: [ 12.446130] Bluetooth: hci0: RTL: rtl: unknown IC info, lmp subver a99e, hci rev 826c, hci ver 0008 This is a regression introduced by commit 26503ad25de8 ("Bluetooth: btrtl: split the device initialization into smaller parts"). The new logic errors out early when no matching IC info can be found, in this case it means the firmware is already loaded. So let's assume the firmware is already loaded when we can't find matching IC info, like the old logic did. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201921 Fixes: 26503ad25de8 ("Bluetooth: btrtl: split the device initialization into smaller parts") Cc: stable@vger.kernel.org # 4.19+ Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: btrtl: Add support for RTL8822C with USB interfaceAlex Lu
This device is included in the RTL8822CU combination wifi and BT part, as well as the BT part of the RTL8822CE. The necessary firmware has been submitted to the linux-firmware project. Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: btrtl: Make array extension_sig static, shrinks object sizeColin Ian King
Don't populate the array extension_sig on the stack but instead make it static. Makes the object code smaller by 75 bytes: Before: text data bss dec hex filename 14325 4920 0 19245 4b2d drivers/bluetooth/btrtl.o After: text data bss dec hex filename 14186 4984 0 19170 4ae2 drivers/bluetooth/btrtl.o (gcc version 8.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btrtl: Add support for a config filename postfixHans de Goede
The contents of the rtl_bt/rtlXXXX_config.bin file may be board specific allow the caller of btrtl_initialize to specify a postfix identifying the board, which if specified will make btrtl_initialize look for rtl_bt/rtlXXXX_config-<postfix>.bin instead. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btrtl: add support for the RTL8723BS and RTL8723DS chipsMartin Blumenstingl
The Realtek RTL8723BS and RTL8723DS chipsets are SDIO wifi chips. They also contain a Bluetooth module which is connected via UART to the host. Realtek's userspace initialization tool (rtk_hciattach) differentiates these two via the HCI version and revision returned by the HCI_OP_READ_LOCAL_VERSION command. Additionally we apply these checks only the for UART devices. Everything else is assumed to be a "RTL8723B" which was originally supported by the driver (communicating via USB). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btrtl: add support for retrieving the UART settingsMartin Blumenstingl
The UART settings are embedded in the config blob. This has to be parsed to successfully initialize the Bluetooth part of the RTL8723BS (which is an SDIO chip, but the Bluetooth part is connected via UART). The Realtek "rtl8723bs_bt" and "rtl8723ds_bt" userspace Bluetooth UART initialization tools (rtk_hciattach) use the following sequence: - send H5 sync pattern (already supported by hci_h5) - get LMP version (already supported by btrtl) - get ROM version (already supported by btrtl) - load the firmware and config for the current chipset (already supported by btrtl) - read UART settings from the config blob (part of this patch) - send UART settings via a vendor command to the device (which changes the baudrate of the device and enables or disables flow control depending on the config) - change the baudrate and flow control settings on the host - send the firmware and config blob to the device (already supported by btrtl) Sending the last firmware and config blob download command (rtl_download_cmd) fails if the UART settings are not updated beforehand. This is presumably because the device applies the config right after the firmware and config blob download - which means that at this point the host is using different UART settings than the device (which will obviously result in non-working communication). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btrtl: Use rtl_dev_err and rtl_dev_infoHans de Goede
Consistently use rtl_dev_err and rtl_dev_info everywhere for messages. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btrtl: split the device initialization into smaller partsMartin Blumenstingl
This prepares the btrtl code so it can be used to initialize Bluetooth modules connected via UART (these are found for example on the RTL8723BS and RTL8723DS SDIO chips, which come with an embedded UART Bluetooth module). The Realtek "rtl8723bs_bt" and "rtl8723ds_bt" userspace Bluetooth UART initialization tools (rtk_hciattach) use the following sequence: 1) send H5 sync pattern (already supported by hci_h5) 2) get LMP version (already supported by btrtl) 3) get ROM version (already supported by btrtl) 4) load the firmware and config for the current chipset (already supported by btrtl) 5) read UART settings from the config blob (currently not supported) 6) send UART settings via a vendor command to the device (which changes the baudrate of the device and enables or disables flow control depending on the config) 7) change the baudrate and flow control settings on the host 8) send the firmware and config blob to the device (already supported by btrtl) The main reason why the initialization has to be split is step #7. This requires changes to the underlying "bus", which should be kept outside of the "generic" btrtl driver. The idea for this split is borrowed from the btbcm driver but adjusted where needed (the btrtl driver for example needs two blobs: firmware and config, while the btbcm only needs one). This also prepares the code for step #5 (parsing the config blob) by centralizing the code which loads the firmware and config blobs and storing the result in the new struct btrtl_device_info. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btrtl: add MODULE_FIRMWARE declarationsMartin Blumenstingl
This makes the firmware names show up in modinfo. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-02-11Bluetooth: btrtl: Add RTL8723D and RTL8821C devicesAlex Lu
The Bluetooth parts of RTL8723D and RTL8723B share the same lmp subversion, thus we need to check both lmp subversion and hci revision to distinguish the two. The same situation is true for RTL8821A and RTL8821C. Accordingly, the selection code is revised. To improve maintainability, a new id_table struct is defined, and an array of such structs is constructed. Adding a new device can thus be as simple as adding another value to the table. Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-10-30Bluetooth: Use bt_dev_err and bt_dev_info when possibleMarcel Holtmann
In case of using BT_ERR and BT_INFO, convert to bt_dev_err and bt_dev_info when possible. This allows for controller specific reporting. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-07-28Bluetooth: btrtl: Fix a error code in rtl_load_config()Dan Carpenter
We accidentally return success if the kmemdup() fails. It results in a NULL dereference in the caller. Fixes: 1110a2dbe698 ("Bluetooth: btrtl: Add RTL8822BE Bluetooth device") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-12Bluetooth: btrtl: Change message for missing config fileLarry Finger
The message concerning missing config files for 8723b, 8821a, and 8761a should have been issued with BT_INFO() rather than BT_ERR() as this condition is not fatal. After looking at that code, I have reworked the logic to log such messages only if the device needs such a config file. At the moment, only the 8822b fits that description. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: 陆朱伟 <alex_lu@realsil.com.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: btrtl: Add RTL8822BE Bluetooth deviceLarry Finger
The RTL8822BE is a new Realtek wifi and BT device. Support for the BT part is hereby added. As this device is similar to most of the other Realtek BT devices, the changes are minimal. The main difference is that the 8822BE needs a configuration file for enabling and disabling features. Thus code is added to select and load this configuration file. Although not needed at the moment, hooks are added for the other devices that might need such configuration files. One additional change is to the routine that tests that the project ID contained in the firmware matches the hardware. As the project IDs are not sequential, continuing to use the position in the array as the expected value of the ID would require adding extra unused entries in the table, and any subsequant rearrangment of the array would break the code. To fix these problems, the array elements now contain both the hardware ID and the expected value for the project ID. Signed-off-by: 陆朱伟 <alex_lu@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-14Bluetooth: btrtl: Create separate module for Realtek BT driverCarlo Caione
As already done for btintel and btbcm export setup as separate function in a vendor-specific module to hold all the Realtek specific commands. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit (git 2.34.1) at 2024-05-28 01:46:53 +0000