summaryrefslogtreecommitdiff
path: root/drivers/bluetooth
AgeCommit message (Collapse)Author
2016-10-20Bluetooth: btwilink: Fix probe return valueJacob Siverskog
Probe functions should return 0 on success. This driver's probe returns the value returned by hci_register_dev(), which is the hci index. This works for systems with only one hci device (id = 0) but for systems where the btwilink device ends up with an id larger than 0, things will start to fall apart. Make the probe function return 0 on success. Signed-off-by: Jacob Siverskog <jacob@teenage.engineering> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-10-13Bluetooth: hci_bcm: Fix autosuspend PM for Lenovo ThinkPad 8Jérôme de Bretagne
ACPI table for BCM2E55 of Lenovo ThinkPad 8 is not correct. Set correctly IRQ polarity for this device, fixing the issue of bluetooth never resuming after autosuspend PM. Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-10-07Bluetooth: btusb: Fix atheros firmware download errorEthan Hsieh
Move usb_autopm_get_interface() ahead of setup_on_usb() to prevent device from sending usb control message in usb suspend mode. The error message is as below: [ 83.944103] btusb 1-2:1.1: usb_suspend_interface: status 0 [ 83.944107] btusb 1-2:1.0: usb_suspend_interface: status 0 [ 83.960132] usb 1-2: usb auto-suspend, wakeup 0 [ 83.976156] usb 1-2: usb_suspend_device: status 0 [ 83.976162] usb 1-2: usb_suspend_both: status 0 [ 298.689106] Bluetooth: hci0 [ 298.689399] Bluetooth: hci0: Failed to access otp area (-113) Signed-off-by: Ethan Hsieh <ethan.hsieh@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-10-06Bluetooth: btusb: add entry for Marvell 8997 chipsetAmitkumar Karwar
btusb_set_bdaddr_marvell() configures BD address for Marvell chipsets. This patch adds new chipset 8997 in the list so that BD address feature would be available for it. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) BBR TCP congestion control, from Neal Cardwell, Yuchung Cheng and co. at Google. https://lwn.net/Articles/701165/ 2) Do TCP Small Queues for retransmits, from Eric Dumazet. 3) Support collect_md mode for all IPV4 and IPV6 tunnels, from Alexei Starovoitov. 4) Allow cls_flower to classify packets in ip tunnels, from Amir Vadai. 5) Support DSA tagging in older mv88e6xxx switches, from Andrew Lunn. 6) Support GMAC protocol in iwlwifi mwm, from Ayala Beker. 7) Support ndo_poll_controller in mlx5, from Calvin Owens. 8) Move VRF processing to an output hook and allow l3mdev to be loopback, from David Ahern. 9) Support SOCK_DESTROY for UDP sockets. Also from David Ahern. 10) Congestion control in RXRPC, from David Howells. 11) Support geneve RX offload in ixgbe, from Emil Tantilov. 12) When hitting pressure for new incoming TCP data SKBs, perform a partial rathern than a full purge of the OFO queue (which could be huge). From Eric Dumazet. 13) Convert XFRM state and policy lookups to RCU, from Florian Westphal. 14) Support RX network flow classification to igb, from Gangfeng Huang. 15) Hardware offloading of eBPF in nfp driver, from Jakub Kicinski. 16) New skbmod packet action, from Jamal Hadi Salim. 17) Remove some inefficiencies in snmp proc output, from Jia He. 18) Add FIB notifications to properly propagate route changes to hardware which is doing forwarding offloading. From Jiri Pirko. 19) New dsa driver for qca8xxx chips, from John Crispin. 20) Implement RFC7559 ipv6 router solicitation backoff, from Maciej Żenczykowski. 21) Add L3 mode to ipvlan, from Mahesh Bandewar. 22) Support 802.1ad in mlx4, from Moshe Shemesh. 23) Support hardware LRO in mediatek driver, from Nelson Chang. 24) Add TC offloading to mlx5, from Or Gerlitz. 25) Convert various drivers to ethtool ksettings interfaces, from Philippe Reynes. 26) TX max rate limiting for cxgb4, from Rahul Lakkireddy. 27) NAPI support for ath10k, from Rajkumar Manoharan. 28) Support XDP in mlx5, from Rana Shahout and Saeed Mahameed. 29) UDP replicast support in TIPC, from Richard Alpe. 30) Per-queue statistics for qed driver, from Sudarsana Reddy Kalluru. 31) Support BQL in thunderx driver, from Sunil Goutham. 32) TSO support in alx driver, from Tobias Regnery. 33) Add stream parser engine and use it in kcm. 34) Support async DHCP replies in ipconfig module, from Uwe Kleine-König. 35) DSA port fast aging for mv88e6xxx driver, from Vivien Didelot. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1715 commits) mlxsw: switchx2: Fix misuse of hard_header_len mlxsw: spectrum: Fix misuse of hard_header_len net/faraday: Stop NCSI device on shutdown net/ncsi: Introduce ncsi_stop_dev() net/ncsi: Rework the channel monitoring net/ncsi: Allow to extend NCSI request properties net/ncsi: Rework request index allocation net/ncsi: Don't probe on the reserved channel ID (0x1f) net/ncsi: Introduce NCSI_RESERVED_CHANNEL net/ncsi: Avoid unused-value build warning from ia64-linux-gcc net: Add netdev all_adj_list refcnt propagation to fix panic net: phy: Add Edge-rate driver for Microsemi PHYs. vmxnet3: Wake queue from reset work i40e: avoid NULL pointer dereference and recursive errors on early PCI error qed: Add RoCE ll2 & GSI support qed: Add support for memory registeration verbs qed: Add support for QP verbs qed: PD,PKEY and CQ verb support qed: Add support for RoCE hw init qede: Add qedr framework ...
2016-10-03Merge tag 'usb-4.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull usb/phy/extcon updates from Greg KH: "Here is the big USB, and PHY, and extcon, patchsets for 4.9-rc1. Full details are in the shortlog, but generally a lot of new hardware support, usb gadget updates, and Wolfram's great cleanup of USB error message handling, making the kernel image a tad bit smaller. All of this has been in linux-next with no reported issues" * tag 'usb-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (343 commits) Revert "usbtmc: convert to devm_kzalloc" USB: serial: cp210x: Add ID for a Juniper console usb: Kconfig: using select for USB_COMMON dependency bluetooth: bcm203x: don't print error when allocating urb fails mmc: host: vub300: don't print error when allocating urb fails usb: hub: change CLEAR_FEATURE to SET_FEATURE usb: core: Introduce a USB port LED trigger USB: bcma: drop Northstar PHY 2.0 initialization code usb: core: hcd: add missing header dependencies usb: musb: da8xx: fix error handling message in probe usb: musb: Fix session based PM for first invalid VBUS usb: musb: Fix PM runtime for disconnect after unconfigure musb: Export musb_root_disconnect for use in modules usb: misc: legousbtower: Fix NULL pointer deference cdc-acm: hardening against malicious devices Revert "usb: gadget: NCM: Protect dev->port_usb using dev->lock" include: extcon: Fix compilation error caused because of incomplete merge MAINTAINERS: add tree entry for USB Serial phy-twl4030-usb: initialize charging-related stuff via pm_runtime phy-twl4030-usb: better handle musb_mailbox() failure ...
2016-09-27bluetooth: bcm203x: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24Bluetooth: Use single return in hci_uart_tty_ioctl() callVignesh Raman
Remove multiple return statements in hci_uart_tty_ioctl() call and added a single return statement. This code re-organisation allows subsequent locking to be easily added. Signed-off-by: Vignesh Raman <Vignesh_Raman@mentor.com> Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Rajeev Kumar <rajeev_kumar@mentor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-24Bluetooth: BCSP fails to ACK re-transmitted frames from the peerDean Jenkins
Send an ACK frame with the current txack value in response to every received reliable frame unless a TX reliable frame is being sent. This modification allows re-transmitted frames from the remote peer to be acknowledged rather than ignored. It means that the remote peer knows which frame number to start re-transmitting from. Without this modification, the recovery time to a missing frame from the remote peer was unnecessarily being extended because the headers of the out of order reliable frames were being discarded rather than being processed. The frame headers of received frames will indicate whether the local peer's transmissions have been acknowledged by the remote peer. Therefore, the local peer may unnecessarily re-transmit despite the remote peer already indicating that the frame had been acknowledged in out of order reliable frame. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Rajeev Kumar <rajeev_kumar@mentor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-24Bluetooth: Tidy-up coding style in hci_bcsp.cDean Jenkins
drivers/bluetooth/hci_bcsp.c contains some style issues as highlighted by ./scripts/checkpatch.pl --strict -f drivers/bluetooth/hci_bcsp.c a) comments - maintainer prefers network style comments b) positioning of lines in multi-line statements c) spaces after casts d) missing blank lines after declarations Therefore, tidy-up the above to make it easier to apply future code changes that have conforming style. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-22Bluetooth: btwilink: Save the packet type before sendingLaura Abbott
Running with KASAN produces some messages: BUG: KASAN: use-after-free in ti_st_send_frame+0x9c/0x16c at addr ffffffc064868fe8 Read of size 1 by task kworker/u17:1/1266 <KASAN output trimmed> Hardware name: HiKey Development Board (DT) Workqueue: hci0 hci_cmd_work Call trace: [<ffffffc00008c00c>] dump_backtrace+0x0/0x178 [<ffffffc00008c1a4>] show_stack+0x20/0x28 [<ffffffc00067da38>] dump_stack+0xa8/0xe0 [<ffffffc000288430>] print_trailer+0x110/0x174 [<ffffffc00028aedc>] object_err+0x4c/0x5c [<ffffffc00028f714>] kasan_report_error+0x254/0x54c [<ffffffc00028fa70>] kasan_report+0x64/0x70 [<ffffffc00028eb8c>] __asan_load1+0x4c/0x54 [<ffffffc000b59b24>] ti_st_send_frame+0x9c/0x16c [<ffffffc000ee8dcc>] hci_send_frame+0xb4/0x118 [<ffffffc000ee8efc>] hci_cmd_work+0xcc/0x154 [<ffffffc0000f6c48>] process_one_work+0x26c/0x7a4 [<ffffffc0000f721c>] worker_thread+0x9c/0x73c [<ffffffc000100250>] kthread+0x138/0x154 [<ffffffc000085c50>] ret_from_fork+0x10/0x40 The packet is being accessed for statistics after it has been freed. Save the packet type before sending for statistics afterwards. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-22Bluetooth: Add a new 04ca:3011 QCA_ROME deviceDmitry Tunin
BugLink: https://bugs.launchpad.net/bugs/1535802 T: Bus=01 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3011 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2016-09-19Bluetooth: hci_uart: Add Marvell supportLoic Poulain
This patch introduces support for Marvell Bluetooth controller over UART (8897 for now). In order to send the final firmware at full speed, a helper firmware is firstly sent. Firmware download is driven by the controller which sends request firmware packets (including expected size). This driver is a global rework of the one proposed by Amitkumar Karwar <akarwar@marvell.com>. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: hci_uart: Add Nokia Protocol identifierLoic Poulain
Will be used by hci_nokia extra protocol. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: hci_bcm: Change protocol nameLoic Poulain
Use full name instead of abbreviation. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: btrtl: Add RTL8822BE Bluetooth deviceLarry Finger
The RTL8822BE is a new Realtek wifi and BT device. Support for the BT part is hereby added. As this device is similar to most of the other Realtek BT devices, the changes are minimal. The main difference is that the 8822BE needs a configuration file for enabling and disabling features. Thus code is added to select and load this configuration file. Although not needed at the moment, hooks are added for the other devices that might need such configuration files. One additional change is to the routine that tests that the project ID contained in the firmware matches the hardware. As the project IDs are not sequential, continuing to use the position in the array as the expected value of the ID would require adding extra unused entries in the table, and any subsequant rearrangment of the array would break the code. To fix these problems, the array elements now contain both the hardware ID and the expected value for the project ID. Signed-off-by: 陆朱伟 <alex_lu@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: btqca: remove null checks on edl->data as it is an arrayColin Ian King
edl->data is an array of __u8 so the null check is unneccessary, so remove it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: btusb: Mark CW6622 devices to have broken link key commandsSzymon Janc
Conwise CW6622 seems to have a problem with the stored link key commands so just mark it as broken. < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 > HCI Event: Command Complete (0x0e) plen 12 Read Local Supported Features (0x04|0x0003) ncmd 1 status 0x00 Features: 0xff 0x3e 0x85 0x38 0x18 0x18 0x00 0x00 < HCI Command: Read Local Version Information (0x04|0x0001) plen 0 > HCI Event: Command Complete (0x0e) plen 12 Read Local Version Information (0x04|0x0001) ncmd 1 status 0x00 HCI Version: 2.0 (0x3) HCI Revision: 0x1f4 LMP Version: 2.0 (0x3) LMP Subversion: 0x1f4 Manufacturer: CONWISE Technology Corporation Ltd (66) ... < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 status 0x00 Commands: 7fffef03cedfffffffffff1ff20ff8ff3f ... < HCI Command: Read Stored Link Key (0x03|0x000d) plen 7 bdaddr 00:00:00:00:00:00 all 1 > HCI Event: Command Complete (0x0e) plen 8 Read Stored Link Key (0x03|0x000d) ncmd 1 status 0x11 max 0 num 0 Error: Unsupported Feature or Parameter Value Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar
The workqueue "workqueue" queues multiple work items viz &qca->ws_awake_rx &qca->ws_rx_vote_off, &qca->ws_awake_device, &qca->ws_tx_vote_off which require strict execution ordering. Hence, an ordered dedicated workqueue has been used to replace the deprecated create_singlethread_workqueue instance. WQ_MEM_RECLAIM has not been set since the driver is not being used on a memory reclaim path. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: add WCNSS dependency for HCI driverArnd Bergmann
The newly added bluetooth driver is based on the soc-specific support, but lacks the obvious compile-time dependency on that: drivers/bluetooth/btqcomsmd.o: In function `btqcomsmd_probe': btqcomsmd.c:(.text.btqcomsmd_probe+0x40): undefined reference to `qcom_wcnss_open_channel' btqcomsmd.c:(.text.btqcomsmd_probe+0x5c): undefined reference to `qcom_wcnss_open_channel' Makefile:969: recipe for target 'vmlinux' failed Fixes: 90c107dc8b2c ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: bcm203x: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: btusb: Add support for 0cf3:e009Kai-Heng Feng
Device 0cf3:e009 is one of the QCA ROME family. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e009 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: btusb, hci_intel: Fix wait_on_bit_timeout() return value checksBart Van Assche
wait_on_bit_timeout() returns one of the following three values: * 0 to indicate success. * -EINTR to indicate that a signal has been received; * -EAGAIN to indicate timeout; Make the wait_on_bit_timeout() callers check for these values. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driverBjorn Andersson
The Qualcomm WCNSS chip provides two SMD channels to the BT core; one for command and one for event packets. This driver exposes the two channels as a hci device. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-08-31miscdevice: Use module_misc_device() macroPrasannaKumar Muralidharan
This patch removes module_init()/module_exit() from driver code by using module_misc_device() macro. All modules in this patch has a print statement which is removed when module_misc_device() macro is used. If undesirable this patch can be dropped entirely, this is the only purpose of making this as a separate patch. Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-18Bluetooth: btmrvl: reset is_suspending flag in failure pathAmitkumar Karwar
is_suspending flag remains on when host sleep fails to enable. Data path is unnecessarily blocked after this. This patch ensures to reset the flag in failure path. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-18Bluetooth: bpa10x: Add support for hci_set_fw_infoMarcel Holtmann
The Digianswer sniffer devices allow for reading a firmware specific information string. If it is available, then inform the Bluetooth core about it via hci_set_fw_info. That exposes it via debugfs like this: # cat /sys/kernel/debug/bluetooth/hci0/firmware_info SNIF_102,BB930,02/01/18,10:37:56 Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-17drivers: misc: ti-st: Use int instead of fuzzy char for callback statusGeert Uytterhoeven
On mips and parisc: drivers/bluetooth/btwilink.c: In function 'ti_st_open': drivers/bluetooth/btwilink.c:174:21: warning: overflow in implicit constant conversion [-Woverflow] hst->reg_status = -EINPROGRESS; drivers/nfc/nfcwilink.c: In function 'nfcwilink_open': drivers/nfc/nfcwilink.c:396:31: warning: overflow in implicit constant conversion [-Woverflow] drv->st_register_cb_status = -EINPROGRESS; There are actually two issues: 1. Whether "char" is signed or unsigned depends on the architecture. As the completion callback data is used to pass a (negative) error code, it should always be signed. 2. EINPROGRESS is 150 on mips, 245 on parisc. Hence -EINPROGRESS doesn't fit in a signed 8-bit number. Change the callback status from "char" to "int" to fix these. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-12Bluetooth: Add support of 13d3:3490 AR3012 deviceDmitry Tunin
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=05 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3490 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1600623 Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2016-07-11Bluetooth: hci_intel: Remove LPM enabling from setup procedureLoic Poulain
LPM can be enabled via a DDC write command at specific DDC ID. As any other DDC value, this is up to the DDC config file to include (or not) the low power mode configuration. Signed-off-by: Loic Poulain <loic.poulain@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-09Bluetooth: Rename HCI_BREDR into HCI_PRIMARYMarcel Holtmann
The HCI_BREDR naming is confusing since it actually stands for Primary Bluetooth Controller. Which is a term that has been used in the latest standard. However from a legacy point of view there only really have been Basic Rate (BR) and Enhanced Data Rate (EDR). Recent versions of Bluetooth introduced Low Energy (LE) and made this terminology a little bit confused since Dual Mode Controllers include BR/EDR and LE. To simplify this the name HCI_PRIMARY stands for the Primary Controller which can be a single mode or dual mode controller. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-08Bluetooth: btusb: add support for device 0489:e092Yvain THONNART
With current btusb.ko kernel module, Bluetooth pretends to be active but there is no real activity. I'm using an Acer Aspire VN7-791. Output of lsusb: Bus 003 Device 007: ID 0489:e092 Foxconn / Hon Hai On my laptop, this device is actually used as a combo with wifi chipset Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e], * Fix by adding a declaration in kernel sources drivers/bluetooth/btusb.c { USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME }, * Compiled extra module /lib/modules/4.4.0-22-generic/extra/btusb.ko * Successfully tested against my phone (obex file transfer) Signed-off-by: Yvain THONNART <yvain.thonnart@m4x.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-08Bluetooth: btmrvl: fix slab-out-of-bounds access in btmrvl_sdioRicky Liang
Kasan reported slab-out-of-bounds access in btmrvl_sdio: [ 33.055400] ================================================================== [ 33.062585] BUG: KASAN: slab-out-of-bounds in memcpy+0x24/0x50 at addr ffffffc0d89b4a00 [ 33.070529] Read of size 256 by task btmrvl_main_ser/3576 [ 33.075885] ============================================================================= [ 33.084002] BUG kmalloc-256 (Tainted: G B ): kasan: bad access detected [ 33.091511] ----------------------------------------------------------------------------- <snip...> [ 33.413498] Call trace: [ 33.415928] [<ffffffc00020a440>] dump_backtrace+0x0/0x190 [ 33.421288] [<ffffffc00020a5ec>] show_stack+0x1c/0x28 [ 33.426305] [<ffffffc000b3288c>] dump_stack+0xa0/0xf8 [ 33.431320] [<ffffffc000396130>] print_trailer+0x158/0x16c [ 33.436765] [<ffffffc0003962cc>] object_err+0x48/0x5c [ 33.441780] [<ffffffc00039be24>] kasan_report+0x344/0x510 [ 33.447141] [<ffffffc00039afd8>] __asan_loadN+0x20/0x150 [ 33.452413] [<ffffffc00039b60c>] memcpy+0x20/0x50 [ 33.457084] [<ffffffc000595fcc>] swiotlb_tbl_map_single+0x2ec/0x310 [ 33.463305] [<ffffffc000596b54>] map_single+0x24/0x30 [ 33.468320] [<ffffffc0005970c8>] swiotlb_map_sg_attrs+0xec/0x21c [ 33.474286] [<ffffffc000219d4c>] __swiotlb_map_sg_attrs+0x48/0xec [ 33.480339] [<ffffffc0008ea610>] msdc_prepare_data.isra.11+0xf0/0x11c [ 33.486733] [<ffffffc0008ecbd0>] msdc_ops_request+0x74/0xf0 [ 33.492266] [<ffffffc0008c6b38>] __mmc_start_request+0x78/0x8c [ 33.498057] [<ffffffc0008c6d6c>] mmc_start_request+0x220/0x240 [ 33.503848] [<ffffffc0008c6e04>] mmc_wait_for_req+0x78/0x250 [ 33.509468] [<ffffffc0008d70fc>] mmc_io_rw_extended+0x2ec/0x388 [ 33.515347] [<ffffffc0008d8fc0>] sdio_io_rw_ext_helper+0x160/0x268 [ 33.521483] [<ffffffc0008d93fc>] sdio_writesb+0x40/0x50 [ 33.526677] [<ffffffbffc338b38>] btmrvl_sdio_host_to_card+0x124/0x1bc [btmrvl_sdio] [ 33.534283] [<ffffffbffc3290a0>] btmrvl_service_main_thread+0x384/0x428 [btmrvl] [ 33.541626] [<ffffffc0002518e8>] kthread+0x140/0x158 [ 33.546550] Memory state around the buggy address: [ 33.551305] ffffffc0d89b4980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 33.558474] ffffffc0d89b4a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.565643] >ffffffc0d89b4a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fc [ 33.572809] ^ [ 33.579889] ffffffc0d89b4b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 33.587055] ffffffc0d89b4b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 33.594221] ================================================================== The cause of this is that btmrvl_sdio_host_to_card can access memory region out of its allocated space due to: 1. the requested block size is smaller than SDIO_BLOCK_SIZE, and/or 2. the allocated memory is not BTSDIO_DMA_ALIGN-aligned. This patch fixes the issue by allocating a buffer which is big enough for SDIO_BLOCK_SIZE transfer and/or BTSDIO_DMA_ALIGN address relocation. Signed-off-by: Ricky Liang <jcliang@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-08Bluetooth: Replace constant hw_variant from Intel Bluetooth firmware filenameTedd Ho-Jeong An
The format of Intel Bluetooth firmware filename for bootloader product is ibt-<hw_variant>-<device_revision_id>.sfi Currently the driver uses a constant value 11 (0x0b) for hw_variant to support LnP/SfP product. But new product like WsP product has a different value such as 12 (0x0c). To support the multiple products, this patch replaces the constant value of hw_variant to the actual hw_variant value read from the device. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-08Bluetooth: Add support for Intel Bluetooth device 3168 [8087:0aa7]Tedd Ho-Jeong An
This patch adds support for Intel Bluetooth device 3168 also known as Sandy Peak (SdP). T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0aa7 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-05-13Bluetooth: Add USB ID 13D3:3487 to ath3kLauro Costa
Add hw id to ath3k usb device list and btusb blacklist T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3487 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Requires these firmwares: ar3k/AthrBT_0x11020100.dfu and ar3k/ramps_0x11020100_40.dfu Firmwares are available in linux-firmware. Device found in a laptop ASUS model N552VW. It's an Atheros AR9462 chip. Signed-off-by: Lauro Costa <lauro@polilinux.com.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-05-06Bluetooth: Add support for Intel Bluetooth device 8265 [8087:0a2b]Tedd Ho-Jeong An
This patch adds support for Intel Bluetooth device 8265 also known as Windstorm Peak (WsP). T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0a2b Rev= 0.10 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-05-02Bluetooth: hci_intel: Fix null gpio desc pointer dereferenceLoic Poulain
gpiod_get_optional can return either ERR_PTR or NULL pointer. NULL case is not tested and then dereferenced later in desc_to_gpio. Fix this by using non optional version which returns ERR_PTR in any error case (this is not an optional gpio). Use the same non optional version for the host-wake gpio. Fixes: 765ea3abd116 ("Bluetooth: hci_intel: Retrieve host-wake IRQ") Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-05-02btmrvl: add platform specific wakeup interrupt supportXinming Hu
On some arm-based platforms, we need to configure platform specific parameters by device tree node and also define our node as a child node of parent SDIO host controller. This patch parses these parameters from device tree. It includes calibration data download to firmware, wakeup pin configured to firmware, and soc specific wake up gpio, which will be set as wakeup interrupt pin. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-22Bluetooth: ath3k: Silence uninitialized variable warningDan Carpenter
We could print an uninitialized value in the error message. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-20Bluetooth: vhci: Fix race at creating hci deviceTakashi Iwai
hci_vhci driver creates a hci device object dynamically upon each HCI_VENDOR_PKT write. Although it checks the already created object and returns an error, it's still racy and may build multiple hci_dev objects concurrently when parallel writes are performed, as the device tracks only a single hci_dev object. This patch introduces a mutex to protect against the concurrent device creations. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-08Bluetooth: hci_bcsp: fix code styleMaxim Zhukov
This commit fixed: trailing "*/" trailing spaces mixed indent space between ~ and ( Signed-off-by: Maxim Zhukov <mussitantesmortem@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-08Bluetooth: vhci: purge unhandled skbsJiri Slaby
The write handler allocates skbs and queues them into data->readq. Read side should read them, if there is any. If there is none, skbs should be dropped by hdev->flush. But this happens only if the device is HCI_UP, i.e. hdev->power_on work was triggered already. When it was not, skbs stay allocated in the queue when /dev/vhci is closed. So purge the queue in ->release. Program to reproduce: #include <err.h> #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/stat.h> #include <sys/types.h> #include <sys/uio.h> int main() { char buf[] = { 0xff, 0 }; struct iovec iov = { .iov_base = buf, .iov_len = sizeof(buf), }; int fd; while (1) { fd = open("/dev/vhci", O_RDWR); if (fd < 0) err(1, "open"); usleep(50); if (writev(fd, &iov, 1) < 0) err(1, "writev"); usleep(50); close(fd); } return 0; } Result: kmemleak: 4609 new suspected memory leaks unreferenced object 0xffff88059f4d5440 (size 232): comm "vhci", pid 1084, jiffies 4294912542 (age 37569.296s) hex dump (first 32 bytes): 20 f0 23 87 05 88 ff ff 20 f0 23 87 05 88 ff ff .#..... .#..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: ... [<ffffffff81ece010>] __alloc_skb+0x0/0x5a0 [<ffffffffa021886c>] vhci_create_device+0x5c/0x580 [hci_vhci] [<ffffffffa0219436>] vhci_write+0x306/0x4c8 [hci_vhci] Fixes: 23424c0d31 (Bluetooth: Add support creating virtual AMP controllers) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable 3.13+ <stable@vger.kernel.org>
2016-04-08Bluetooth: vhci: fix open_timeout vs. hdev raceJiri Slaby
Both vhci_get_user and vhci_release race with open_timeout work. They both contain cancel_delayed_work_sync, but do not test whether the work actually created hdev or not. Since the work can be in progress and _sync will wait for finishing it, we can have data->hdev allocated when cancel_delayed_work_sync returns. But the call sites do 'if (data->hdev)' *before* cancel_delayed_work_sync. As a result: * vhci_get_user allocates a second hdev and puts it into data->hdev. The former is leaked. * vhci_release does not release data->hdev properly as it thinks there is none. Fix both cases by moving the actual test *after* the call to cancel_delayed_work_sync. This can be hit by this program: #include <err.h> #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <time.h> #include <unistd.h> #include <sys/stat.h> #include <sys/types.h> int main(int argc, char **argv) { int fd; srand(time(NULL)); while (1) { const int delta = (rand() % 200 - 100) * 100; fd = open("/dev/vhci", O_RDWR); if (fd < 0) err(1, "open"); usleep(1000000 + delta); close(fd); } return 0; } And the result is: BUG: KASAN: use-after-free in skb_queue_tail+0x13e/0x150 at addr ffff88006b0c1228 Read of size 8 by task kworker/u13:1/32068 ============================================================================= BUG kmalloc-192 (Tainted: G E ): kasan: bad access detected ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in vhci_open+0x50/0x330 [hci_vhci] age=260 cpu=3 pid=32040 ... kmem_cache_alloc_trace+0x150/0x190 vhci_open+0x50/0x330 [hci_vhci] misc_open+0x35b/0x4e0 chrdev_open+0x23b/0x510 ... INFO: Freed in vhci_release+0xa4/0xd0 [hci_vhci] age=9 cpu=2 pid=32040 ... __slab_free+0x204/0x310 vhci_release+0xa4/0xd0 [hci_vhci] ... INFO: Slab 0xffffea0001ac3000 objects=16 used=13 fp=0xffff88006b0c1e00 flags=0x5fffff80004080 INFO: Object 0xffff88006b0c1200 @offset=4608 fp=0xffff88006b0c0600 Bytes b4 ffff88006b0c11f0: 09 df 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffff88006b0c1200: 00 06 0c 6b 00 88 ff ff 00 00 00 00 00 00 00 00 ...k............ Object ffff88006b0c1210: 10 12 0c 6b 00 88 ff ff 10 12 0c 6b 00 88 ff ff ...k.......k.... Object ffff88006b0c1220: c0 46 c2 6b 00 88 ff ff c0 46 c2 6b 00 88 ff ff .F.k.....F.k.... Object ffff88006b0c1230: 01 00 00 00 01 00 00 00 e0 ff ff ff 0f 00 00 00 ................ Object ffff88006b0c1240: 40 12 0c 6b 00 88 ff ff 40 12 0c 6b 00 88 ff ff @..k....@..k.... Object ffff88006b0c1250: 50 0d 6e a0 ff ff ff ff 00 02 00 00 00 00 ad de P.n............. Object ffff88006b0c1260: 00 00 00 00 00 00 00 00 ab 62 02 00 01 00 00 00 .........b...... Object ffff88006b0c1270: 90 b9 19 81 ff ff ff ff 38 12 0c 6b 00 88 ff ff ........8..k.... Object ffff88006b0c1280: 03 00 20 00 ff ff ff ff ff ff ff ff 00 00 00 00 .. ............. Object ffff88006b0c1290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffff88006b0c12a0: 00 00 00 00 00 00 00 00 00 80 cd 3d 00 88 ff ff ...........=.... Object ffff88006b0c12b0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 . .............. Redzone ffff88006b0c12c0: bb bb bb bb bb bb bb bb ........ Padding ffff88006b0c13f8: 00 00 00 00 00 00 00 00 ........ CPU: 3 PID: 32068 Comm: kworker/u13:1 Tainted: G B E 4.4.6-0-default #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20151112_172657-sheep25 04/01/2014 Workqueue: hci0 hci_cmd_work [bluetooth] 00000000ffffffff ffffffff81926cfa ffff88006be37c68 ffff88006bc27180 ffff88006b0c1200 ffff88006b0c1234 ffffffff81577993 ffffffff82489320 ffff88006bc24240 0000000000000046 ffff88006a100000 000000026e51eb80 Call Trace: ... [<ffffffff81ec8ebe>] ? skb_queue_tail+0x13e/0x150 [<ffffffffa06e027c>] ? vhci_send_frame+0xac/0x100 [hci_vhci] [<ffffffffa0c61268>] ? hci_send_frame+0x188/0x320 [bluetooth] [<ffffffffa0c61515>] ? hci_cmd_work+0x115/0x310 [bluetooth] [<ffffffff811a1375>] ? process_one_work+0x815/0x1340 [<ffffffff811a1f85>] ? worker_thread+0xe5/0x11f0 [<ffffffff811a1ea0>] ? process_one_work+0x1340/0x1340 [<ffffffff811b3c68>] ? kthread+0x1c8/0x230 ... Memory state around the buggy address: ffff88006b0c1100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88006b0c1180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88006b0c1200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88006b0c1280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88006b0c1300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 23424c0d31 (Bluetooth: Add support creating virtual AMP controllers) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: stable 3.13+ <stable@vger.kernel.org>
2016-04-08Bluetooth: hci_ldisc: Fix null pointer derefence in case of early dataLoic Poulain
HCI_UART_PROTO_SET flag is set before hci_uart_set_proto call. If we receive data from tty layer during this procedure, proto pointer may not be assigned yet, leading to null pointer dereference in rx method hci_uart_tty_receive. This patch fixes this issue by introducing HCI_UART_PROTO_READY flag in order to avoid any proto operation before proto opening and assignment. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-08Bluetooth: hci_bcm: Add BCM2E71 ACPI IDLoic Poulain
This ID is used at least by Asus T100-CHI. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10Bluetooth: btmrvl_sdio: fix firmware activation failureWei-Ning Huang
In some case, the btmrvl_sdio firmware would fail to active within the polling time. Increase the polling interval to 100 msec to fix the issue. Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org> Signed-off-by: Wei-Ning Huang <wnhuang@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10Bluetooth: btusb: Add a new AR3012 ID 13d3:3472Dmitry Tunin
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3472 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1552925 Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2016-03-10Bluetooth: hci_bcm: Add BCM2E55 ACPI ID used in Lenovo ThinkPad Tablet 8Jérôme de Bretagne
Lenovo ThinkPad Tablet 8 with BCM43241 rev B5 chipset uses the BCM2E55 ACPI ID for Bluetooth. Add it to the list of supported devices. Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-29Bluetooth: hci_uart: Add diag and address support for Intel/AG6xxMarcel Holtmann
The AG6xx devices behave similar to Wilkens Peak and Stone Peak and with that it is needed to check for Intel default address. In addition it is possible to enable vendor events and diag support. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>