summaryrefslogtreecommitdiff
path: root/drivers/bus/mhi
AgeCommit message (Collapse)Author
2021-12-09bus: mhi: core: Add support for forced PM resumeLoic Poulain
For whatever reason, some devices like QCA6390, WCN6855 using ath11k are not in M3 state during PM resume, but still functional. The mhi_pm_resume should then not fail in those cases, and let the higher level device specific stack continue resuming process. Add an API mhi_pm_resume_force(), to force resuming irrespective of the current MHI state. This fixes a regression with non functional ath11k WiFi after suspend/resume cycle on some machines. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=214179 Link: https://lore.kernel.org/regressions/871r5p0x2u.fsf@codeaurora.org/ Fixes: 020d3b26c07a ("bus: mhi: Early MHI resume failure in non M3 state") Cc: stable@vger.kernel.org #5.13 Reported-by: Kalle Valo <kvalo@codeaurora.org> Reported-by: Pengyu Ma <mapengyu@gmail.com> Tested-by: Kalle Valo <kvalo@kernel.org> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> [mani: Switched to API, added bug report, reported-by tags and CCed stable] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20211209131633.4168-1-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03bus: mhi: pci_generic: Fix device recovery failed issueSlark Xiao
For Foxconn T99W175 device(sdx55 platform) in some host platform, it would be unavailable once the host execute the err handler. After checking, it's caused by the delay time too short to get a successful reset. Please see my test evidence as bewlow(BTW, I add some extra test logs in function mhi_pci_reset_prepare and mhi_pci_reset_done): When MHI_POST_RESET_DELAY_MS equals to 500ms: Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222477] mhi mhi0: Device MHI is not in valid state Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222628] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222631] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222632] mhi mhi0: mhi_soc_reset write soc to reset Nov 4 14:30:05 jbd-ThinkEdge kernel: [ 147.839993] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done Nov 4 14:30:05 jbd-ThinkEdge kernel: [ 147.902063] mhi-pci-generic 0000:2d:00.0: reset failed When MHI_POST_RESET_DELAY_MS equals to 1000ms or 1500ms: Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.067857] mhi mhi0: Device MHI is not in valid state Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068029] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068032] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068034] mhi mhi0: mhi_soc_reset write soc to reset Nov 4 19:07:29 jbd-ThinkEdge kernel: [ 159.607006] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done Nov 4 19:07:29 jbd-ThinkEdge kernel: [ 159.607152] mhi mhi0: Requested to power ON Nov 4 19:07:51 jbd-ThinkEdge kernel: [ 181.302872] mhi mhi0: Failed to reset MHI due to syserr state Nov 4 19:07:51 jbd-ThinkEdge kernel: [ 181.303011] mhi-pci-generic 0000:2d:00.0: failed to power up MHI controller When MHI_POST_RESET_DELAY_MS equals to 2000ms: Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180527] mhi mhi0: Failed to transition from PM state: Linkdown or Error Fatal Detect to: SYS ERROR Process Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180535] mhi mhi0: Device MHI is not in valid state Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180722] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180725] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180727] mhi mhi0: mhi_soc_reset write soc to reset Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.230787] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.230928] mhi mhi0: Requested to power ON Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.231173] mhi mhi0: Power on setup success Nov 4 17:51:14 jbd-ThinkEdge kernel: [ 153.254747] mhi mhi0: Wait for device to enter SBL or Mission mode I also tried big data like 3000, and it worked as well. 500ms may not be enough for all support mhi device. We shall increase it to 2000ms at least. Link: https://lore.kernel.org/r/20211108113127.3938-1-slark_xiao@163.com [mani: massaged commit message little bit, added Fixes tag and CCed stable] Fixes: 8ccc3279fcad ("mhi: pci_generic: Add support for reset") Cc: stable@vger.kernel.org Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20211126104951.35685-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-01Merge tag 'char-misc-5.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big set of char/misc driver changes for 5.15-rc1. Lots of different driver subsystems are being updated in here, notably: - mhi subsystem update - fpga subsystem update - coresight/hwtracing subsystem update - interconnect subsystem update - nvmem subsystem update - parport drivers update - phy subsystem update - soundwire subsystem update and there are some other char/misc drivers being updated as well: - binder driver additions - new misc drivers - lkdtm driver updates - mei driver updates - sram driver updates - other minor driver updates. Note, there are no habanalabs driver updates in this pull request, that will probably come later before -rc1 is out in a different request. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits) Revert "bus: mhi: Add inbound buffers allocation flag" misc/pvpanic: fix set driver data VMCI: fix NULL pointer dereference when unmapping queue pair char: mware: fix returnvar.cocci warnings parport: remove non-zero check on count soundwire: cadence: do not extend reset delay soundwire: intel: conditionally exit clock stop mode on system suspend soundwire: intel: skip suspend/resume/wake when link was not started soundwire: intel: fix potential race condition during power down phy: qcom-qmp: Add support for SM6115 UFS phy dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings phy: qmp: Provide unique clock names for DP clocks lkdtm: remove IDE_CORE_CP crashpoint lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ coresight: Replace deprecated CPU-hotplug functions. Documentation: coresight: Add documentation for CoreSight config coresight: syscfg: Add initial configfs support coresight: config: Add preloaded configurations coresight: etm4x: Add complex configuration handlers to etmv4 coresight: etm-perf: Update to activate selected configuration ...
2021-08-27Revert "bus: mhi: Add inbound buffers allocation flag"Greg Kroah-Hartman
This reverts commit 0092a1e3f7636ff4e202a41b0320690699247e22 This should be reverted in the char-misc-next branch to make merging with Linus's branch possible due to issues with the mhi code that was found in the networking tree. Link: https://lore.kernel.org/r/20210827175852.GB15018@thinkpad Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bhaumik Bhatt <bbhatt@codeaurora.org> Cc: Hemant Kumar <hemantk@codeaurora.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26Revert "net: really fix the build..."Kalle Valo
This reverts commit ce78ffa3ef1681065ba451cfd545da6126f5ca88. Wren and Nicolas reported that ath11k was failing to initialise QCA6390 Wi-Fi 6 device with error: qcom_mhi_qrtr: probe of mhi0_IPCR failed with error -22 Commit ce78ffa3ef16 ("net: really fix the build..."), introduced in v5.14-rc5, caused this regression in qrtr. Most likely all ath11k devices are broken, but I only tested QCA6390. Let's revert the broken commit so that ath11k works again. Reported-by: Wren Turkal <wt@penguintechs.org> Reported-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210826172816.24478-1-kvalo@codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Build failure in drivers/net/wwan/mhi_wwan_mbim.c: add missing parameter (0, assuming we don't want buffer pre-alloc). Conflict in drivers/net/dsa/sja1105/sja1105_main.c between: 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") Follow the instructions from the commit message of the former commit - removed the if conditions. When looking at commit 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") note that the mask_iotag fields get removed by the following patch. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-05bus: mhi: core: Improve debug messages for power upBhaumik Bhatt
Improve error message to be more descriptive if a failure occurs with an invalid power up execution environment. Additionally, add a debug log to print the execution environment and MHI state before a power up is attempted to confirm if the device is in an expected state. This helps clarify reasons for power up failures such as the device being found in a PBL or Emergency Download Mode execution environment and the host expected a full power up with Pass-Through and no image loading involved. Link: https://lore.kernel.org/r/1620072038-36160-1-git-send-email-bbhatt@codeaurora.org Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-11-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05bus: mhi: core: Replace DMA allocation wrappers with original APIsBhaumik Bhatt
There is nothing special done within the mhi_alloc_coherent() and the mhi_free_coherent() wrapper functions. They only directly call the equivalent DMA allocation functions. Replace them with the original function calls such that the implementation is clear and direct. Link: https://lore.kernel.org/r/1624392428-9328-1-git-send-email-bbhatt@codeaurora.org Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-10-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05bus: mhi: core: Add range checks for BHI and BHIeBhaumik Bhatt
When obtaining the BHI or BHIe offsets during the power up preparation phase, range checks are missing. These can help controller drivers avoid accessing any address outside of the MMIO region. Ensure that mhi_cntrl->reg_len is set before MHI registration as it is a required field and range checks will fail without it. Link: https://lore.kernel.org/r/1620330705-40192-7-git-send-email-bbhatt@codeaurora.org Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-9-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05bus: mhi: pci_generic: Set register access length for MHI driverBhaumik Bhatt
MHI driver requires register space length to add range checks and prevent memory region accesses outside of that for MMIO space. Set it from the PCI generic controller driver before registering the MHI controller. Link: https://lore.kernel.org/r/1620330705-40192-6-git-send-email-bbhatt@codeaurora.org Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-8-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05bus: mhi: core: Set BHI and BHIe pointers to NULL in clean-upBhaumik Bhatt
Set the BHI and BHIe pointers to NULL as part of clean-up. This makes sure that stale pointers are not accessed after powering MHI down. Link: https://lore.kernel.org/r/1620330705-40192-3-git-send-email-bbhatt@codeaurora.org Suggested-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-5-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05bus: mhi: core: Set BHI/BHIe offsets on power up preparationBhaumik Bhatt
Set the BHI and/or BHIe offsets in mhi_prepare_for_power_up(), rearrange the function, and remove the equivalent from mhi_async_power_up(). This helps consolidate multiple checks in different parts of the driver and can help MHI fail early on before power up begins if the offsets are not read correctly. Link: https://lore.kernel.org/r/1620330705-40192-2-git-send-email-bbhatt@codeaurora.org Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05bus: mhi: pci_generic: Add Cinterion MV31-W PCIe to MHIULRICH Thomas
This patch adds VendorID/ProductID and MBIM Channel Definitions for M.2 Modem Card (PCIe Variant) to MHI PCI generic controller driver. Cinterion MV31-W (by Thales) Additional information on such Modem Card (USB or PCIe variant) is available at: https://www.thalesgroup.com/en/markets/digital-identity-and-security/iot/iot-connectivity/products/iot-products/mv31-w-ultra-high Link: https://lore.kernel.org/r/PAZP264MB284690134DA010698E6B3BDDE60A9@PAZP264MB2846.FRAP264.PROD.OUTLOOK.COM [mani: fixed the subject, whitespace, and added sideband_wake field] Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: ULRICH Thomas <thomas.ulrich@thalesgroup.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05bus: mhi: Add inbound buffers allocation flagLoic Poulain
Currently, the MHI controller driver defines which channels should have their inbound buffers allocated and queued. But ideally, this is something that should be decided by the MHI device driver instead, which actually deals with that buffers. Add a flag parameter to mhi_prepare_for_transfer allowing to specify if buffers have to be allocated and queued by the MHI stack. Keep auto_queue flag for now, but should be removed at some point. Link: https://lore.kernel.org/r/1624566520-20406-1-git-send-email-loic.poulain@linaro.org Tested-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-03net: really fix the build...David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicting commits, all resolutions pretty trivial: drivers/bus/mhi/pci_generic.c 5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU") 56f6f4c4eb2a ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean") drivers/nfc/s3fwrn5/firmware.c a0302ff5906a ("nfc: s3fwrn5: remove unnecessary label") 46573e3ab08f ("nfc: s3fwrn5: fix undefined parameter values in dev_err()") 801e541c79bb ("nfc: s3fwrn5: fix undefined parameter values in dev_err()") MAINTAINERS 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") 8a7b46fa7902 ("MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-21bus: mhi: pci_generic: Fix inbound IPCR channelLoic Poulain
The qrtr-mhi client driver assumes that inbound buffers are automatically allocated and queued by the MHI core, but this doesn't happen for mhi pci devices since IPCR inbound channel is not flagged with auto_queue, causing unusable IPCR (qrtr) feature. Fix that. Link: https://lore.kernel.org/r/1625736749-24947-1-git-send-email-loic.poulain@linaro.org [mani: fixed a spelling mistake in commit description] Fixes: 855a70c12021 ("bus: mhi: Add MHI PCI support for WWAN modems") Cc: stable@vger.kernel.org #5.10 Reviewed-by: Hemant kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210716075106.49938-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: mhi: core: Validate channel ID when processing command completionsBhaumik Bhatt
MHI reads the channel ID from the event ring element sent by the device which can be any value between 0 and 255. In order to prevent any out of bound accesses, add a check against the maximum number of channels supported by the controller and those channels not configured yet so as to skip processing of that event ring element. Link: https://lore.kernel.org/r/1624558141-11045-1-git-send-email-bbhatt@codeaurora.org Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device") Cc: stable@vger.kernel.org #5.10 Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210716075106.49938-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: mhi: pci_generic: Apply no-op for wake using sideband wake booleanBhaumik Bhatt
Devices such as SDX24 do not have the provision for inband wake doorbell in the form of channel 127 and instead have a sideband GPIO for it. Newer devices such as SDX55 or SDX65 support inband wake method by default. Ensure the functionality is used based on this such that device wake stays held when a client driver uses mhi_device_get() API or the equivalent debugfs entry. Link: https://lore.kernel.org/r/1624560809-30610-1-git-send-email-bbhatt@codeaurora.org Fixes: e3e5e6508fc1 ("bus: mhi: pci_generic: No-Op for device_wake operations") Cc: stable@vger.kernel.org #5.12 Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210716075106.49938-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-15bus: mhi: pci-generic: configurable network interface MRURichard Laing
The MRU value used by the MHI MBIM network interface affects the throughput performance of the interface. Different modem models use different default MRU sizes based on their bandwidth capabilities. Large values generally result in higher throughput for larger packet sizes. In addition if the MRU used by the MHI device is larger than that specified in the MHI net device the data is fragmented and needs to be re-assembled which generates a (single) warning message about the fragmented packets. Setting the MRU on both ends avoids the extra processing to re-assemble the packets. This patch allows the documented MRU for a modem to be automatically set as the MHI net device MRU avoiding fragmentation and improving throughput performance. Signed-off-by: Richard Laing <richard.laing@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' callsChristophe JAILLET
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call Add the missing call in the error handling path of the probe and in the remove function. Cc: <stable@vger.kernel.org> Fixes: b012ee6bfe2a ("mhi: pci_generic: Add PCI error handlers") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/f70c14701f4922d67e717633c91b6c481b59f298.1623445348.git.christophe.jaillet@wanadoo.fr Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210621161616.77524-6-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24bus: mhi: Wait for M2 state during system resumeBaochen Qiang
During system resume, MHI host triggers M3->M0 transition and then waits for target device to enter M0 state. Once done, the device queues a state change event into ctrl event ring and notifies MHI host by raising an interrupt, where a tasklet is scheduled to process this event. In most cases, the tasklet is served timely and wait operation succeeds. However, there are cases where CPU is busy and cannot serve this tasklet for some time. Once delay goes long enough, the device moves itself to M1 state and also interrupts MHI host after inserting a new state change event to ctrl ring. Later when CPU finally has time to process the ring, there will be two events: 1. For M3->M0 event, which is the first event to be processed queued first. The tasklet handler serves the event, updates device state to M0 and wakes up the task. 2. For M0->M1 event, which is processed later, the tasklet handler triggers M1->M2 transition and updates device state to M2 directly, then wakes up the MHI host (if it is still sleeping on this wait queue). Note that although MHI host has been woken up while processing the first event, it may still has no chance to run before the second event is processed. In other words, MHI host has to keep waiting till timeout causing the M0 state to be missed. kernel log here: ... Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.911251] mhi 0000:06:00.0: Entered with PM state: M3, MHI state: M3 Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.917762] mhi 0000:06:00.0: State change event to state: M0 Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.917767] mhi 0000:06:00.0: State change event to state: M1 Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4338.788231] mhi 0000:06:00.0: Did not enter M0 state, MHI state: M2, PM state: M2 ... Fix this issue by simply adding M2 as a valid state for resume. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Cc: stable@vger.kernel.org Fixes: 0c6b20a1d720 ("bus: mhi: core: Add support for MHI suspend and resume") Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210524040312.14409-1-bqiang@codeaurora.org [mani: slightly massaged the commit message] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210621161616.77524-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24bus: mhi: core: Fix power down latencyLoic Poulain
On graceful power-down/disable transition, when an MHI reset is performed, the MHI device loses its context, including interrupt configuration. However, the current implementation is waiting for event(irq) driven state change to confirm reset has been completed, which never happens, and causes reset timeout, leading to unexpected high latency of the mhi_power_down procedure (up to 45 seconds). Fix that by moving to the recently introduced poll_reg_field method, waiting for the reset bit to be cleared, in the same way as the power_on procedure. Cc: stable@vger.kernel.org Fixes: a6e2e3522f29 ("bus: mhi: core: Add support for PM state transitions") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Link: https://lore.kernel.org/r/1620029090-8975-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210621161616.77524-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09bus: mhi: pci-generic: Fix hibernationLoic Poulain
This patch fixes crash after resuming from hibernation. The issue occurs when mhi stack is builtin and so part of the 'restore-kernel', causing the device to be resumed from 'restored kernel' with a no more valid context (memory mappings etc...) and leading to spurious crashes. This patch fixes the issue by implementing proper freeze/restore callbacks. Link: https://lore.kernel.org/r/1622571445-4505-1-git-send-email-loic.poulain@linaro.org Reported-by: Shujun Wang <wsj20369@163.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210606153741.20725-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove()Wei Yongjun
This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Link: https://lore.kernel.org/r/20210413160318.2003699-1-weiyongjun1@huawei.com Fixes: 8562d4fe34a3 ("mhi: pci_generic: Add health-check") Cc: stable <stable@vger.kernel.org> Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Hemant kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210606153741.20725-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09bus: mhi: pci_generic: T99W175: update channel name from AT to DUNJarvis Jiang
According to MHI v1.1 specification, change the channel name of T99W175 from "AT" to "DUN" (Dial-up networking) for both channel 32 and 33, so that the channels can be bound to the Qcom WWAN control driver, and device node such as /dev/wwan0p3DUN will be generated, which is very useful for debugging modem Link: https://lore.kernel.org/r/20210429014226.21017-1-jarvis.w.jiang@gmail.com [mani: changed the dev node to /dev/wwan0p3DUN] Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210606153741.20725-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09bus: mhi: core: Fix shadow declarationsManivannan Sadhasivam
This commit fixes below sparse warnings with W=2 about shadow declarations: drivers/bus/mhi/core/main.c: In function ‘parse_xfer_event’: drivers/bus/mhi/core/main.c:667:17: warning: declaration of ‘flags’ shadows a previous local [-Wshadow] 667 | unsigned long flags; | ^~~~~ drivers/bus/mhi/core/main.c:565:16: note: shadowed declaration is here 565 | unsigned long flags = 0; | ^~~~~ drivers/bus/mhi/core/main.c: In function ‘mhi_process_ctrl_ev_ring’: drivers/bus/mhi/core/main.c:856:23: warning: declaration of ‘new_state’ shadows a previous local [-Wshadow] 856 | enum mhi_pm_state new_state; | ^~~~~~~~~ drivers/bus/mhi/core/main.c:837:19: note: shadowed declaration is here 837 | enum mhi_state new_state; | ^~~~~~~~~ Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-08bus: mhi: pci_generic: Constify mhi_controller_config struct definitionsManivannan Sadhasivam
"mhi_controller_config" struct is not modified inside "mhi_pci_dev_info" struct. So constify the instances. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-08bus: mhi: pci_generic: Introduce Foxconn T99W175 supportJarvis Jiang
Add support for T99W175 modems, this modem series is based on SDX55 qcom chip. The modem is mainly based on MBIM protocol for both the data and control path. This patch adds support for below modems: - T99W175(based on sdx55), Both for eSIM and Non-eSIM - DW5930e(based on sdx55), With eSIM, It's also T99W175 - DW5930e(based on sdx55), Non-eSIM, It's also T99W175 This patch was tested with Ubuntu 20.04 X86_64 PC as host Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408095524.3559-1-jarvis.w.jiang@gmail.com Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-08bus: mhi: core: Sanity check values from remote device before useJeffrey Hugo
When parsing the structures in the shared memory, there are values which come from the remote device. For example, a transfer completion event will have a pointer to the tre in the relevant channel's transfer ring. As another example, event ring elements may specify a channel in which the event occurred, however the specified channel value may not be valid as no channel is defined at that index even though the index may be less than the maximum allowed index. Such values should be considered to be untrusted, and validated before use. If we blindly use such values, we may access invalid data or crash if the values are corrupted. If validation fails, drop the relevant event. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Link: https://lore.kernel.org/r/1615411855-15053-1-git-send-email-jhugo@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: pci_generic: Add FIREHOSE channelsLoic Poulain
When device enters flash programmer context (FP), it exposes firehose protocol through the EDL dedicated channels. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617784860-32439-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: pci_generic: Implement PCI shutdown callbackLoic Poulain
Deinit the device on shutdown to halt MHI/PCI operation on device side. This change fixes floating device state with some hosts that do not fully shutdown PCIe device when rebooting. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1616169037-7969-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Remove __ prefix for MHI channel unprepare functionBhaumik Bhatt
The __mhi_unprepare_channel() API does not require the __ prefix. Get rid of it and make the internal function consistent with the other function names. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Link: https://lore.kernel.org/r/1617311778-1254-9-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Check channel execution environment before issuing resetBhaumik Bhatt
A client can attempt to unprepare certain channels for transfer even after the execution environment they are supposed to run in has changed. In the event that happens, the device need not be notified of the reset and the host can proceed with clean up for the channel context and memory allocated for it on the host as the device will no longer be able to respond to such a request. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-8-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Clear configuration from channel context during resetBhaumik Bhatt
When clearing up the channel context after client drivers are done using channels, the configuration is currently not being reset entirely. Ensure this is done to appropriately handle issues where clients unaware of the context state end up calling functions which expect a context. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-7-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Hold device wake for channel update commandsBhaumik Bhatt
MHI host can fail early if device is in a bad state by attempting to assert device wake and holding the runtime PM vote before sending a channel update command instead of performing a wake toggle and waiting for a timeout if the send were to fail. This can help improve the design and enable shorter wait periods for device to respond as votes are already held. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-6-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Update debug messages to use client deviceBhaumik Bhatt
Debug messages dealing with client devices use the generic MHI controller or parent device along with a channel number. It would be better to instead use the client device directly and enable better log messages for channel updates. Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-5-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Improvements to the channel handling state machineBhaumik Bhatt
Improve the channel handling state machine such that all commands go through a common function and a validation process to ensure that the state machine is not violated in any way and adheres to the MHI specification. Using this common function allows MHI to eliminate some unnecessary debug messages and code duplication. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-4-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Clear context for stopped channels from remove()Bhaumik Bhatt
If a channel was explicitly stopped but not reset and a driver remove is issued, clean up the channel context such that it is reflected on the device. This move is useful if a client driver module is unloaded or a device crash occurs with the host having placed the channel in a stopped state. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-3-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Allow sending the STOP channel commandBhaumik Bhatt
Add support to allow sending the STOP channel command. If a client driver would like to STOP a channel and have the device retain the channel context instead of issuing a RESET to it and clearing the context, this would provide support for it after the ability to send this command is exposed to clients. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-2-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: pci_generic: Add SDX65 based modem supportBhaumik Bhatt
Add generic info for SDX65 based modems. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1617399199-35172-1-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Remove pre_init flag used for power purposesBhaumik Bhatt
Some controllers can choose to skip preparation for power up. In that case, device context is initialized based on the pre_init flag not being set during mhi_prepare_for_power_up(). There is no reason MHI host driver should maintain and provide controllers with two separate paths for preparing MHI. Going forward, all controllers will be required to call the mhi_prepare_for_power_up() API followed by their choice of sync or async power up. This allows MHI host driver to get rid of the pre_init flag and sets up a common way for all controllers to use MHI. This also helps controllers fail early on during preparation phase in some failure cases. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617313309-24035-1-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: pm: reduce PM state change verbosityLoic Poulain
Since M3 can be entered/exited quite a lot when used for runtime PM, keep the mhi suspend/resume transitions quiet. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617700315-12492-2-git-send-email-loic.poulain@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Fix MHI runtime_pm behaviorLoic Poulain
This change ensures that PM reference is always get during packet queueing and released either after queuing completion (RX) or once the buffer has been consumed (TX). This guarantees proper update for underlying MHI controller runtime status (e.g. last_busy timestamp) and prevents suspend to be triggered while TX packets are flying, or before we completed update of the RX ring. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617700315-12492-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-01bus: mhi: core: Move to polling method to wait for MHI readyBhaumik Bhatt
In certain devices, it is likely that there is no incoming MHI interrupt for a transition to MHI READY state. One such example is the move from Pass Through to an SBL or AMSS execution environment. In order to facilitate faster bootup times as there is no need to wait until timeout_ms completes, MHI host can poll every 25 milliseconds to check if device has entered MHI READY until a maximum timeout of twice the timeout_ms is reached. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617215665-19593-3-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-01bus: mhi: core: Introduce internal register poll helper functionBhaumik Bhatt
Introduce helper function to allow MHI core driver to poll for a value in a register field. This helps reach a common path to read and poll register values along with a retry time interval. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617215665-19593-2-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-03-31bus: mhi: core: Improve state strings for debug messagesBhaumik Bhatt
As of now abbreviations are being used for many state and execution environment strings. Improve and expand those such that debug messages are clear. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1617067704-28850-8-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-03-31bus: mhi: core: Wait for MHI READY state in most scenariosBhaumik Bhatt
When moving from SYS_ERROR transition to a different execution environment, MHI host relies on the BHI register read to spawn the next image download or wait for READY -> M0 states. The device can at times move the execution environment to mission mode when a pass through is expected, which can result in a stall. Initiate a wait for MHI READY and write M0 such that the device can proceed with state change event updates for any new execution environment being entered. This allows us to remove conditionals in handling firmware load for PBL modes and keeps the execution environment out of the picture as it can change at any time. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617067704-28850-7-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-03-31bus: mhi: core: Identify Flash Programmer as a mission mode use caseBhaumik Bhatt
MHI power up can go through an EDL to Flash Programmer path when the device has a blank NAND. In those cases, mhi_sync_power_up() can timeout waiting for a mission mode execution environment. Allow a successful power up instead by identifying Flash Programmer as a valid mission mode execution environment with a purpose to flash the device image contents. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1617067704-28850-6-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
generated by cgit (git 2.34.1) at 2024-05-28 08:53:59 +0000