summaryrefslogtreecommitdiff
path: root/drivers/bus
AgeCommit message (Collapse)Author
2016-05-19Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.7. Here's the summary of the changes: - ATH79: Support for DTB passuing using the UHI boot protocol - ATH79: Remove support for builtin DTB. - ATH79: Add zboot debug serial support. - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega and DPT-Module. - ATH79: Update devicetree clock support for AR9132 and AR9331. - ATH79: Cleanup the DT code. - ATH79: Support newer SOCs in ath79_ddr_ctrl_init. - ATH79: Fix regression in PCI window initialization. - BCM47xx: Move SPROM driver to drivers/firmware/ - BCM63xx: Enable partition parser in defconfig. - BMIPS: BMIPS5000 has I cache filing from D cache - BMIPS: BMIPS: Add cpu-feature-overrides.h - BMIPS: Add Whirlwind support - BMIPS: Adjust mips-hpt-frequency for BCM7435 - BMIPS: Remove maxcpus from BCM97435SVMB DTS - BMIPS: Add missing 7038 L1 register cells to BCM7435 - BMIPS: Various tweaks to initialization code. - BMIPS: Enable partition parser in defconfig. - BMIPS: Cache tweaks. - BMIPS: Add UART, I2C and SATA devices to DT. - BMIPS: Add BCM6358 and BCM63268support - BMIPS: Add device tree example for BCM6358. - BMIPS: Improve Improve BCM6328 and BCM6368 device trees - Lantiq: Add support for device tree file from boot loader - Lantiq: Allow build with no built-in DT. - Loongson 3: Reserve 32MB for RS780E integrated GPU. - Loongson 3: Fix build error after ld-version.sh modification - Loongson 3: Move chipset ACPI code from drivers to arch. - Loongson 3: Speedup irq processing. - Loongson 3: Add basic Loongson 3A support. - Loongson 3: Set cache flush handlers to nop. - Loongson 3: Invalidate special TLBs when needed. - Loongson 3: Fast TLB refill handler. - MT7620: Fallback strategy for invalid syscfg0. - Netlogic: Fix CP0_EBASE redefinition warnings - Octeon: Initialization fixes - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig - Octeon: Correctly handle endian-swapped initramfs images. - Octeon: Support CN73xx, CN75xx and CN78xx. - Octeon: Remove dead code from cvmx-sysinfo. - Octeon: Extend number of supported CPUs past 32. - Octeon: Remove some code limiting NR_IRQS to 255. - Octeon: Simplify octeon_irq_ciu_gpio_set_type. - Octeon: Mark some functions __init in smp.c - Octeon: Octeon: Add Octeon III CN7xxx interface detection - PIC32: Add serial driver and bindings for it. - PIC32: Add PIC32 deadman timer driver and bindings. - PIC32: Add PIC32 clock timer driver and bindings. - Pistachio: Determine SoC revision during boot - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER. - Sibyte: Strip redundant comments from bcm1480_regs.h. - Panic immediately if panic_on_oops is set. - module: fix incorrect IS_ERR_VALUE macro usage. - module: Make consistent use of pr_* - Remove no longer needed work_on_cpu() call. - Remove CONFIG_IPV6_PRIVACY from defconfigs. - Fix registers of non-crashing CPUs in dumps. - Handle MIPSisms in new vmcore_elf32_check_arch. - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work. - Allow RIXI to be used on non-R2 or R6 cores. - Reserve nosave data for hibernation - Fix siginfo.h to use strict POSIX types. - Don't unwind user mode with EVA. - Fix watchpoint restoration - Ptrace watchpoints for R6. - Sync icache when it fills from dcache - I6400 I-cache fills from dcache. - Various MSA fixes. - Cleanup MIPS_CPU_* definitions. - Signal: Move generic copy_siginfo to signal.h - Signal: Fix uapi include in exported asm/siginfo.h - Timer fixes for sake of KVM. - XPA TLB refill fixes. - Treat perf counter feature - Update John Crispin's email address - Add PIC32 watchdog and bindings. - Handle R10000 LL/SC bug in set_pte() - cpufreq: Various fixes for Longson1. - R6: Fix R2 emulation. - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes - ELF: ABI and FP fixes. - Allow for relocatable kernel and use that to support KASLR. - Fix CPC_BASE_ADDR mask - Plenty fo smp-cps, CM, R6 and M6250 fixes. - Make reset_control_ops const. - Fix kernel command line handling of leading whitespace. - Cleanups to cache handling. - Add brcm, bcm6345-l1-intc device tree bindings. - Use generic clkdev.h header - Remove CLK_IS_ROOT usage. - Misc small cleanups. - CM: Fix compilation error when !MIPS_CM - oprofile: Fix a preemption issue - Detect DSP ASE v3 support:1" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits) MIPS: pic32mzda: fix getting timer clock rate. MIPS: ath79: fix regression in PCI window initialization MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs MIPS: Fix VZ probe gas errors with binutils <2.24 MIPS: perf: Fix I6400 event numbers MIPS: DEC: Export `ioasic_ssr_lock' to modules MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC MIPS: CM: Fix compilation error when !MIPS_CM MIPS: Fix genvdso error on rebuild USB: ohci-jz4740: Remove obsolete driver MIPS: JZ4740: Probe OHCI platform device via DT MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant MIPS: pistachio: Determine SoC revision during boot MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435 mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type MIPS: Prevent "restoration" of MSA context in non-MSA kernels MIPS: cevt-r4k: Dynamically calculate min_delta_ns MIPS: malta-time: Take seconds into account MIPS: malta-time: Start GIC count before syncing to RTC MIPS: Force CPUs to lose FP context during mode switches ...
2016-05-18Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons. For the most part, this is now related to power management controllers, which have not yet been abstracted into a separate subsystem, and typically require some code in drivers/soc or arch/arm to control the power domains. Another large chunk here is a rework of the NVIDIA Tegra USB3.0 support, which was surprisingly tricky and took a long time to get done. Finally, reset controller handling as always gets merged through here as well" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) arm-ccn: Enable building as module soc/tegra: pmc: Add generic PM domain support usb: xhci: tegra: Add Tegra210 support usb: xhci: Add NVIDIA Tegra XUSB controller driver dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding PCI: tegra: Support per-lane PHYs dt-bindings: pci: tegra: Update for per-lane PHYs phy: tegra: Add Tegra210 support phy: Add Tegra XUSB pad controller support dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding phy: core: Allow children node to be overridden clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs drivers: firmware: psci: make two helper functions inline soc: renesas: rcar-sysc: Add support for R-Car H3 power areas soc: renesas: rcar-sysc: Add support for R-Car E2 power areas soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas soc: renesas: rcar-sysc: Add support for R-Car H2 power areas ...
2016-05-13MIPS: Remove no longer needed work_on_cpu() callAnna-Maria Gleixner
Since commit 3b9d6da67e11 ("cpu/hotplug: Fix rollback during error-out in __cpu_disable()") it is ensured that callbacks of CPU_ONLINE and CPU_DOWN_PREPARE are processed on the hotplugged CPU. Due to this work_on_cpu() calls are no longer required. Replace work_on_cpu() with a direct call of mips_cdmm_bus_up() or mips_cdmm_bus_down(). Description of those functions are adapted. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: rt@linutronix.de Patchwork: https://patchwork.linux-mips.org/patch/13197/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13BUS: brcmstb_gisb: Hook to MIPS board_be_handlerFlorian Fainelli
MIPS kernels allow platforms to invoke a custom Bus Error handler, add the necessary code to do this for Broadcom SoCs where the GISB bus error handler can be used. We may get a bus error from an address decoded outside of the GISB bus space, so we need to check the validity of such a capture before printing anything. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: cernekee@gmail.com Cc: arnd@arndb.de Cc: jaedon.shin@gmail.com Cc: pgynther@google.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12284/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-09arm-ccn: Enable building as moduleSuzuki K Poulose
arm-ccn driver uses irq_set_affinity, which is not exported and hence cannot be built as a module, eventhough we have all the bits ready. This patch makes use of the exported helper irq_set_affinity_hint() instead. Also, the __free_irq expects the affinity_hint to be NULL when we free the irq. So set the affinity_hint to NULL at clean up. Now that we can build it as a module, update the Kconfig to reflect the change. Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-25Merge tag 'arm-soc/for-4.7/drivers' of http://github.com/Broadcom/stblinux ↵Arnd Bergmann
into next/drivers Merge "Broadcom ARM-based SoCs drivers changes" from Florian Fainelli: - Justin adds a soc_dev driver to properly report to user-space the Broadcom STB SoC family, product and revision - Florian reworks how the brcmstb_gisb driver dependency is done to enable it on Broadcom STB MIPS-based SoCs and remove a select in arch/arm/mach-bcm/Kconfig * tag 'arm-soc/for-4.7/drivers' of http://github.com/Broadcom/stblinux: bus: brcmstb_gisb: Rework dependencies soc: brcmstb: add SoC driver to brcmstb
2016-04-18bus: brcmstb_gisb: Rework dependenciesFlorian Fainelli
Do not have the machine Kconfig entry point need to select BRCMSTB_GISB_ARB, instead, just let it be default ARCH_BRCMSTB which is a better way to deal with this. While at it, also make it default BMIPS_GENERIC so the legacy MIPS-based STB platforms can benefit from the same thing. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-04-12Merge tag 'mvebu-fixes-4.6-1' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
mvebu fixes for 4.6 (part 1) - fix USB adress register for Linksys Armada 388 based boards - fix build warning in mvebu-mbus * tag 'mvebu-fixes-4.6-1' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Correct unit address for linksys bus: mvebu-mbus: use %pa to print phys_addr_t Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-12bus: uniphier-system-bus: fix condition of overlap checkKunihiko Hayashi
This patch fixes condition whether the specified address ranges overlap each other. Fixes: 4b7f48d395a7 ("bus: uniphier-system-bus: add UniPhier System Bus driver") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-03-30bus: mvebu-mbus: use %pa to print phys_addr_tArnd Bergmann
A recent change to the mbus driver added a warning printk that prints a phys_addr_t using the %x format string, which fails in case we build with 64-bit phys_addr_t: drivers/bus/mvebu-mbus.c: In function 'mvebu_mbus_get_dram_win_info': drivers/bus/mvebu-mbus.c:975:9: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'phys_addr_t {aka long long unsigned int}' [-Werror=format=] This uses the special %pa format string instead, so we always print the correct type. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: f2900acea801 ("bus: mvebu-mbus: provide api for obtaining IO and DRAM window information") Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-03-28bus: simple-pm-bus: Use ARCH_RENESASSimon Horman
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-03-21Merge tag 'arm64-perf' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm[64] perf updates from Will Deacon: "I have another mixed bag of ARM-related perf patches here. It's about 25% CPU and 75% interconnect, but with drivers/bus/ languishing without an obvious maintainer or tree, Olof and I agreed to keep all of these PMU patches together. I suspect a whole load of code from drivers/bus/arm-* can be moved under drivers/perf/, so that's on the radar for the future. Summary: - Initial support for ARMv8.1 CPU PMUs - Support for the CPU PMU in Cavium ThunderX - CPU PMU support for systems running 32-bit Linux in secure mode - Support for the system PMU in ARM CCI-550 (Cache Coherent Interconnect)" * tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (26 commits) drivers/perf: arm_pmu: avoid NULL dereference when not using devicetree arm64: perf: Extend ARMV8_EVTYPE_MASK to include PMCR.LC arm-cci: remove unused variable arm-cci: don't return value from void function arm-cci: make private functions static arm-cci: CoreLink CCI-550 PMU driver arm-cci500: Rearrange PMU driver for code sharing with CCI-550 PMU arm-cci: CCI-500: Work around PMU counter writes arm-cci: Provide hook for writing to PMU counters arm-cci: Add helper to enable PMU without synchornising counters arm-cci: Add routines to save/restore all counters arm-cci: Get the status of a counter arm-cci: write_counter: Remove redundant check arm-cci: Delay PMU counter writes to pmu::pmu_enable arm-cci: Refactor CCI PMU enable/disable methods arm-cci: Group writes to counter arm-cci: fix handling cpumask_any_but return value arm-cci: simplify sysfs attr handling drivers/perf: arm_pmu: implement CPU_PM notifier arm64: dts: Add Cavium ThunderX specific PMU ...
2016-03-20Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons: - Rockchip rk3368 gains power domain support - Small updates for the ARM spmi driver - The Atmel PMC driver saw a larger rework, touching both arch/arm/mach-at91 and drivers/clk/at91 - All reset controller driver changes alway get merged through arm-soc, though this time the largest change is the addition of a MIPS pistachio reset driver - One bugfix for the NXP (formerly Freescale) i.MX weim bus driver" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) bus: imx-weim: Take the 'status' property value into account clk: at91: remove useless includes clk: at91: pmc: remove useless capacities handling clk: at91: pmc: drop at91_pmc_base usb: gadget: atmel: access the PMC using regmap ARM: at91: remove useless includes and function prototypes ARM: at91: pm: move idle functions to pm.c ARM: at91: pm: find and remap the pmc ARM: at91: pm: simply call at91_pm_init clk: at91: pmc: move pmc structures to C file clk: at91: pmc: merge at91_pmc_init in atmel_pmc_probe clk: at91: remove IRQ handling and use polling clk: at91: make use of syscon/regmap internally clk: at91: make use of syscon to share PMC registers in several drivers hwmon: (scpi) add energy meter support firmware: arm_scpi: add support for 64-bit sensor values firmware: arm_scpi: decrease Tx timeout to 20ms firmware: arm_scpi: fix send_message and sensor_get_value for big-endian reset: sti: Make reset_control_ops const reset: zynq: Make reset_control_ops const ...
2016-03-14bus: mvebu-mbus: provide api for obtaining IO and DRAM window informationMarcin Wojtas
This commit enables finding appropriate mbus window and obtaining its target id and attribute for given physical address in two separate routines, both for IO and DRAM windows. This functionality is needed for Armada XP/38x Network Controller's Buffer Manager and PnC configuration. [gregory.clement@free-electrons.com: Fix size test for mvebu_mbus_get_dram_win_info] Signed-off-by: Marcin Wojtas <mw@semihalf.com> [DRAM window information reference in LKv3.10] Signed-off-by: Evan Wang <xswang@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-12bus: imx-weim: Take the 'status' property value into accountFabio Estevam
Currently we have an incorrect behaviour when multiple devices are present under the weim node. For example: &weim { ... status = "okay"; sram@0,0 { ... status = "okay"; }; mram@0,0 { ... status = "disabled"; }; }; In this case only the 'sram' device should be probed and not 'mram'. However what happens currently is that the status variable is ignored, causing the 'sram' device to be disabled and 'mram' to be enabled. Change the weim_parse_dt() function to use for_each_available_child_of_node()so that the devices marked with 'status = disabled' are not probed. Cc: <stable@vger.kernel.org> Suggested-by: Wolfgang Netbal <wolfgang.netbal@sigmatek.at> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-03-01Merge tag 'sunxi-drivers-for-4.6' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/drivers Merge "Allwinner drivers changes for 4.6" from Maxime Ripard: Some minor fixes for the RSB and SRAM controller drivers * tag 'sunxi-drivers-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: drivers: soc: sunxi: Fix mask generation for SRAM mapping drivers: sunxi-rsb: fix error output type
2016-02-29arm-cci: remove unused variableWill Deacon
hw_counter is unused in the PMU IRQ handler, so remove it. Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-29arm-cci: don't return value from void functionWill Deacon
pmu_write_register has a void return type, so remove the useless return statement. Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-29arm-cci: make private functions staticWill Deacon
cci_pmu_sync_counters and pmu_event_set_period are internal functions to the CCI PMU driver, so make them static to avoid polluting the kernel namespace. Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-29arm-cci: CoreLink CCI-550 PMU driverSuzuki K Poulose
Add ARM CoreLink CCI-550 cache coherent interconnect PMU driver support. The CCI-550 PMU shares all the attributes of CCI-500 PMU, except for an additional master interface (MI-6 - 0xe). CCI-550 requires the same work around as for CCI-500 to write to the PMU counter. Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-29arm-cci500: Rearrange PMU driver for code sharing with CCI-550 PMUSuzuki K Poulose
CCI-550 PMU shares most of the CCI-500 PMU attributes including the event format, PMU event codes. The only difference is an additional master interface (MI6 - 0xe). Hence we share the driver code for both, except for a model specific event validate method. This patch renames the common CCI500 symbols to CCI5xx, including the Kconfig symbol. No functional changes to the PMU driver. Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-29arm-cci: CCI-500: Work around PMU counter writesSuzuki K Poulose
The CCI PMU driver sets the event counter to the half of the maximum value(2^31) it can count before we start the counters via pmu_event_set_period(). This is done to give us the best chance to handle the overflow interrupt, taking care of extreme interrupt latencies. However, CCI-500 comes with advanced power saving schemes, which disables the clock to the event counters unless the counters are enabled to count (PMCR.CEN). This prevents the driver from writing the period to the counters before starting them. Also, there is no way we can reset the individual event counter to 0 (PMCR.RST resets all the counters, losing their current readings). However the value of the counter is preserved and could be read back, when the counters are not enabled. So we cannot reliably use the counters and compute the number of events generated during the sampling period since we don't have the value of the counter at start. This patch works around this issue by changing writes to the counter with the following steps. 1) Disable all the counters (remembering any counters which were enabled) 2) Enable the PMU, now that all the counters are disabled. For each counter to be programmed, repeat steps 3-7 3) Save the current event and program the target counter to count an invalid event, which by spec is guaranteed to not-generate any events. 4) Enable the target counter. 5) Write to the target counter. 6) Disable the target counter 7) Restore the event back on the target counter. 8) Disable the PMU 9) Restore the status of the all the counters Cc: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-29arm-cci: Provide hook for writing to PMU countersSuzuki K Poulose
Add a hook for writing to CCI PMU counters. This callback can be used for CCI models which requires some extra work to program the PMU counter values. To accommodate group writes and single counter writes, the call back accepts a bitmask of the counter indices which need to be programmed with the given value. Cc: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-29arm-cci: Add helper to enable PMU without synchornising countersSuzuki K Poulose
On CCI-500 writing to a counter requires turning the PMU on. So, synchronising the counter state should not be performed for such special cases, while turning the PMU on. This patch adds a helper, __cci_pmu_enable_nosync(), without flushing the counter states. Cc: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-29arm-cci: Add routines to save/restore all countersSuzuki K Poulose
Adds helper routines to disable the counter controls for all the counters on the CCI PMU and restore it back, by preserving the original state in caller provided mask. Cc: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-29arm-cci: Get the status of a counterSuzuki K Poulose
Add helper routines to check if the counter is enabled or not. Cc: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-29arm-cci: write_counter: Remove redundant checkSuzuki K Poulose
pmu_write_counter() is now only called from pmu_write_counters(), which does so for each set index in the given mask, bounded by cci_pmu->num_cntrs. So, there is no need for an extra check to make sure the given counter is valid inside pmu_write_counter. This patch gets rid of that. Cc: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-29arm-cci: Delay PMU counter writes to pmu::pmu_enableSuzuki K Poulose
CCI PMU driver always reprograms the counters to a safe value (half of the counter max, = 2^31) before starting the profiling to account for extreme interrupt latencies. Also, the cost of writing to a PMU counter could be very costly on some PMUs(e.g, CCI-500). In order to ammortise the cost of programming the counters, this patch delays the counter writes to pmu::pmu_enable(). We use the PER_HES_ARCH flag to keep track of the counters which need to be programmed. Before turning on the PMU, we go through the counters that were marked for write, and perform the operation in a batch. To unify all the counter writes to pmu_enable(), this patch also makes sure that we disable-and-enable the PMU in the irq handler to program any counters that overflowed. Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-29arm-cci: Refactor CCI PMU enable/disable methodsSuzuki K Poulose
This patch refactors the CCI PMU driver code a little bit to make it easier share the code for enabling/disabling the CCI PMU. This will be used by the hooks to work around the special cases where writing to a counter is not always that easy(e.g, CCI-500) No functional changes. Cc: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-29arm-cci: Group writes to counterSuzuki K Poulose
Add a helper to group the writes to PMU counter, this will be used to delay setting the event period to pmu::pmu_enable() Cc: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-29arm-cci: fix handling cpumask_any_but return valueAndrzej Hajda
cpumask_any_but returns value >= nr_cpu_ids if there are no more CPUs. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576 Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-29arm-cci: simplify sysfs attr handlingMark Rutland
There's no need to dynamically initialise attribute pointers when we can get the compiler to do it for us. We also don't need a dev_ext_attribute for the cpumask, as the drvdata for a PMU device is a pointer to struct pmu. Cc: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-01Merge tag 'vexpress-for-v4.5/fixes-rc2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes vexpress fixes for v4.5 Couple of minor fixes for vexpress platforms: 1. Add missing of_node_put in vexpress config bus 2. Add missing DMA-330 abort interrupt on Juno platforms * tag 'vexpress-for-v4.5/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: Add missing DMA Abort interrupt to Juno bus: vexpress-config: Add missing of_node_put Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01bus: uniphier-system-bus: revive tristate promptMasahiro Yamada
At first, commit 4b7f48d395a7 ("bus: uniphier-system-bus: add UniPhier System Bus driver") introduced this driver as a tristate one. Then, commit 326ea45aa827 ("bus: uniphier: allow only built-in driver") temporarily made it boolean in order to fix a link error in case it is compiled as a module. The root cause was fixed by commit b80443c2211c ("of/platform: export of_default_bus_match_table"). Now this driver can really be a module. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01bus: vexpress-config: Add missing of_node_putAmitoj Kaur Chawla
for_each_compatible_node performs an of_node_get on each iteration, so to break out of the loop an of_node_put is required. Found using Coccinelle. The semantic patch used for this is as follows: // <smpl> @@ expression e; local idexpression n; @@ for_each_compatible_node(n, ...) { ... when != of_node_put(n) when != e = n ( return n; + of_node_put(n); ? return ...; ) ... } // </smpl> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-01-25drivers: sunxi-rsb: fix error output typeAndre Przywara
"len" is actually a size_t in this function here, so properly annotate the dev_err printf type to allow compilation for 64-bit architectures. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-20Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...
2015-12-31bus: uniphier: allow only built-in driverArnd Bergmann
Building the newly added uniphier system bus driver as a module causes a link error, so let's only allow it to be built-in for now, to fix allmodconfig: ERROR: "of_default_bus_match_table" [drivers/bus/uniphier-system-bus.ko] undefined! Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-22bus: sunxi-rsb: Fix peripheral IC mapping runtime addressChen-Yu Tsai
0x4e is the runtime address normally associated with perihperal ICs. 0x45 is not a valid runtime address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22bus: sunxi-rsb: Fix primary PMIC mapping hardware addressChen-Yu Tsai
The primary PMICs use 0x3a3 as their hardware address, not 0x3e3. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22bus: uniphier-system-bus: add UniPhier System Bus driverMasahiro Yamada
The UniPhier System Bus is an external bus that connects on-board devices to the UniPhier SoC. Each bank (chip select) is dynamically mapped to the CPU-viewed address base via the bus controller. The bus controller must be configured before any access to the bus. This driver parses the "ranges" property of the System Bus node and initialized the bus controller. After the bus becomes ready, devices below it are populated. Note: Each bank can be mapped anywhere in the supported address space; there is nothing preventing us from assigning bank 0 on 0x42000000, 0x43000000, or anywhere as long as such region is not used by others. So, the "ranges" is just one possible software configuration, which does not seem to fit in device tree because device tree is a hardware description language. However, of_translate_address() requires "ranges" in every bus node between CPUs and device mapped on the CPU address space. In other words, "ranges" properties must be statically defined in device tree. After some discussion, I decided the dynamic address reassignment by the driver is too bothersome. Instead, the device tree should provide a reasonable translation setup that the OS can rely on. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-14Merge tag 'sunxi-fixes-for-4.4' of ↵Kevin Hilman
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Merge "Allwinner fixes for 4.4" from Maxime Ripard: Allwinner fixes for 4.4 Two patches, one to fix the touchscreen axis on one Allwinner board, and the other one fixing a mutex unlocking issue on one error path in the RSB driver. * tag 'sunxi-fixes-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: bus: sunxi-rsb: unlock on error in sunxi_rsb_read() ARM: dts: sunxi: sun6i-a31s-primo81.dts: add touchscreen axis swapping property
2015-11-17bus: sunxi-rsb: unlock on error in sunxi_rsb_read()Dan Carpenter
Don't forget to unlock before returning an error code. Fixes: d787dcdb9c8f ('bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-11-12Merge branch 'x15-audio-fixes' into omap-for-v4.4/fixesTony Lindgren
2015-11-10Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "As we've enabled multiplatform kernels on ARM, and greatly done away with the contents under arch/arm/mach-*, there's still need for SoC-related drivers to go somewhere. Many of them go in through other driver trees, but we still have drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code that might be shared between ARM and ARM64 (or just in general makes sense to not have under the architecture directory). This branch contains mostly such code: - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to communicate with power management blocks on these SoCs for use by clock, regulator and bus frequency drivers. - Allwinner Reduced Serial Bus driver, again used to communicate with PMICs. - Drivers for ARM's SCPI (System Control Processor). Not to be confused with PSCI (Power State Coordination Interface). SCPI is used to communicate with the assistant embedded cores doing power management, and we have yet to see how many of them will implement this for their hardware vs abstracting in other ways (or not at all like in the past). - To make confusion between SCPI and PSCI more likely, this release also includes an update of PSCI to interface version 1.0. - Rockchip support for power domains. - A driver to talk to the firmware on Raspberry Pi" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits) soc: qcom: smd-rpm: Correct size of outgoing message bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings ARM: bcm2835: add mutual inclusion protection drivers: psci: make PSCI 1.0 functions initialization version dependent dt-bindings: Correct paths in Rockchip power domains binding document soc: rockchip: power-domain: don't try to print the clock name in error case soc: qcom/smem: add HWSPINLOCK dependency clk: berlin: add cpuclk ARM: berlin: dts: add CLKID_CPU for BG2Q ARM: bcm2835: Add the Raspberry Pi firmware driver soc: qcom: smem: Move RPM message ram out of smem DT node soc: qcom: smd-rpm: Correct the active vs sleep state flagging soc: qcom: smd: delete unneeded of_node_put firmware: qcom-scm: build for correct architecture level soc: qcom: smd: Correct SMEM items for upper channels qcom-scm: add missing prototype for qcom_scm_is_available() qcom-scm: fix endianess issue in __qcom_scm_is_call_available soc: qcom: smd: Reject send of too big packets soc: qcom: smd: Handle big endian CPUs ...
2015-10-26bus: sunxi-rsb: Add driver for Allwinner Reduced Serial BusChen-Yu Tsai
Reduced Serial Bus (RSB) is an Allwinner proprietery interface used to communicate with PMICs and other peripheral ICs. RSB is a two-wire push-pull serial bus that supports 1 master device and up to 15 active slave devices. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-15bus: arm-ccn: Fix irq affinity setting on CPU migrationPawel Moll
When PMU context is migrating between CPUs, interrupt affinity is set as well. Only this should not happen when the CCN interrupt is not being used at all (the driver is using a hrtimer tick instead). Fixed now. Cc: <stable@vger.kernel.org> # 4.2+ Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-15bus: arm-ccn: Handle correctly no-more-cpus casePawel Moll
When migrating events the driver picks another cpu using cpumask_any_but() function, which returns value >= nr_cpu_ids when there is none available, not a negative value as the code assumed. Fixed now. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-12bus: omap-ocp2scp: Fix module aliasAxel Lin
Remove extra space between platform prefix and driver name in MODULE_ALIAS. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-28arm-cci500: Don't enable PMU driver by defaultSuzuki K. Poulose
Disable building CCI-500 PMU driver by default. Reported-by: Russell King <linux@arm.linux.org.uk> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: arm@kernel.org Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>