summaryrefslogtreecommitdiff
path: root/drivers/bus
AgeCommit message (Collapse)Author
2014-06-17bus/arm-cci: add dependency on OF && CPU_V7Arnd Bergmann
The arm-cci code uses device tree helpers for initialization that don't work on kernels built without CONFIG_OF. Further, it contains an inline assembly in cci_enable_port_for_self() that uses ARMv7 instructions and fails to build when targetting other ARM instruction set versions. This works around both issues by limiting the scope of the Kconfig symbol to platforms that can actually build this driver cleanly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Shawn Guo <shawn.guo@linaro.org>
2014-06-02Merge tag 'drivers-for-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull ARM SoC driver changes from Olof Johansson: "SoC-near driver changes that we're merging through our tree. Mostly because they depend on other changes we have staged, but in some cases because the driver maintainers preferred that we did it this way. This contains a largeish cleanup series of the omap_l3_noc bus driver, cpuidle rework for Exynos, some reset driver conversions and a long branch of TI EDMA fixes and cleanups, with more to come next release. The TI EDMA cleanups is a shared branch with the dmaengine tree, with a handful of Davinci-specific fixes on top. After discussion at last year's KS (and some more on the mailing lists), we are here adding a drivers/soc directory. The purpose of this is to keep per-vendor shared code that's needed by different drivers but that doesn't fit into the MFD (nor drivers/platform) model. We expect to keep merging contents for this hierarchy through arm-soc so we can keep an eye on what the vendors keep adding here and not making it a free-for-all to shove in crazy stuff" * tag 'drivers-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM tty: serial: msm: Remove direct access to GSBI power: reset: keystone-reset: introduce keystone reset driver Documentation: dt: add bindings for keystone pll control controller Documentation: dt: add bindings for keystone reset driver soc: qcom: fix of_device_id table ARM: EXYNOS: Fix kernel panic when unplugging CPU1 on exynos ARM: EXYNOS: Move the driver to drivers/cpuidle directory ARM: EXYNOS: Cleanup all unneeded headers from cpuidle.c ARM: EXYNOS: Pass the AFTR callback to the platform_data ARM: EXYNOS: Move S5P_CHECK_SLEEP into pm.c ARM: EXYNOS: Move the power sequence call in the cpu_pm notifier ARM: EXYNOS: Move the AFTR state function into pm.c ARM: EXYNOS: Encapsulate the AFTR code into a function ARM: EXYNOS: Disable cpuidle for exynos5440 ARM: EXYNOS: Encapsulate boot vector code into a function for cpuidle ARM: EXYNOS: Pass wakeup mask parameter to function for cpuidle ARM: EXYNOS: Remove ifdef for scu_enable in pm ARM: EXYNOS: Move scu_enable in the cpu_pm notifier ARM: EXYNOS: Use the cpu_pm notifier for pm ...
2014-06-02Merge tag 'soc-for-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull part one of ARM SoC updates from Olof Johansson: "A quite large set of SoC updates this cycle. In no particular order: - Multi-cluster power management for Samsung Exynos, adding support for big.LITTLE CPU switching on EXYNOS5 - SMP support for Marvell Armada 375 and 38x - SMP rework on Allwinner A31 - Xilinx Zynq support for SOC_BUS, big endian - Marvell orion5x platform cleanup, modernizing the implementation and moving to DT. - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so that their platform can be enabled in the same kernel binary as most of the other v7 platforms in the tree. \o/ The work isn't quite complete, there's some driver fixes still needed, but the basics now work. New SoC support added: - Freescale i.MX6SX - LSI Axxia AXM55xx SoCs - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800 - STi STIH407 plus a large set of various smaller updates for different platforms. I'm probably missing some important one here" * tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits) ARM: exynos: don't run exynos4 l2x0 setup on other platforms ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug ARM: EXYNOS: mcpm rename the power_down_finish ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC ARM: EXYNOS: Enable multi-platform build support ARM: EXYNOS: Consolidate Kconfig entries ARM: EXYNOS: Add support for EXYNOS5410 SoC ARM: EXYNOS: Support secondary CPU boot of Exynos3250 ARM: EXYNOS: Add Exynos3250 SoC ID ARM: EXYNOS: Add 5800 SoC support ARM: EXYNOS: initial board support for exynos5260 SoC clk: exynos5410: register clocks using common clock framework ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084 ARM: sunxi: allow building without reset controller Documentation: devicetree: arm: sort enable-method entries ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks ARM: dts: axxia: Add reset controller power: reset: Add Axxia system reset driver ARM: axxia: Adding defconfig for AXM55xx ...
2014-06-02Merge tag 'cleanup-for-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull ARM SoC cleanups from Olof Johansson: "Cleanups for 3.16. Among these are: - a bunch of misc cleanups for Broadcom platforms, mostly housekeeping - enabling Common Clock Framework on the older s3c24xx Samsung chipsets - cleanup of the Versatile Express system controller code, moving it to syscon - power management cleanups for OMAP platforms plus a handful of other cleanups across the place" * tag 'cleanup-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits) ARM: kconfig: allow PCI support to be selected with ARCH_MULTIPLATFORM clk: samsung: fix build error ARM: vexpress: refine dependencies for new code clk: samsung: clk-s3c2410-dlck: do not use PNAME macro as it declares __initdata cpufreq: exynos: Fix the compile error ARM: S3C24XX: move debug-macro.S into the common space ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro ARM: S3C24XX: trim down debug uart handling ARM: compressed/head.S: remove s3c24xx special case ARM: EXYNOS: Remove unnecessary inclusion of cpu.h ARM: EXYNOS: Migrate Exynos specific macros from plat to mach ARM: EXYNOS: Remove exynos_subsys registration ARM: EXYNOS: Remove duplicate lines in Makefile ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files ARM: OMAP3/4: PRM: add support of late_init call to prm_ll_ops ARM: OMAP3/OMAP4: PRM: add prm_features flags and add IO wakeup under it ARM: OMAP3/4: PRM: provide io chain reconfig function through irq setup ARM: OMAP2+: PRM: remove unnecessary cpu_is_XXX calls from prm_init / exit ARM: OMAP2+: PRCM: cleanup some header includes ...
2014-05-26Merge tag 'omap-for-v3.16/l3-noc-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers Merge "ARM: omap l3-noc bus driver changes for v3.16 merge window, resend" from Tony Lindgren: Improvments to omap l3-noc bus driver for v3.16 merge window to add support for am347x and dra7. * tag 'omap-for-v3.16/l3-noc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits) bus: omap_l3_noc: Add AM4372 interconnect error data bus: omap_l3_noc: Add DRA7 interconnect error data bus: omap_l3_noc: introduce concept of submodule bus: omap_l3_noc: Add information about the context of operation bus: omap_l3_noc: add information about the type of operation bus: omap_l3_noc: ignore masked out unclearable targets bus: omap_l3_noc: improve readability by using helper for slave event parsing bus: omap_l3_noc: make error reporting and handling common bus: omap_l3_noc: fix masterid detection bus: omap_l3_noc: convert flagmux information into a structure bus: omap_l3_noc: use of_match_data to pick up SoC information bus: omap_l3_noc: Add support for discountinous flag mux input numbers bus: omap_l3_noc: convert target information into a structure bus: omap_l3_noc: move L3 master data structure out bus: omap_l3_noc: un-obfuscate l3_targ address computation bus: omap_l3_noc: switch over to relaxed variants of readl/writel bus: omap_l3_noc: populate l3->dev and use it bus: omap_l3_noc: remove iclk from omap_l3 struct bus: omap_l3_noc: rename functions and data to omap_l3 bus: omap_l3_noc: Fix copyright information ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-26ARM: vexpress: refine dependencies for new codeArnd Bergmann
The versatile express changes for 3.16 introduced a number of build regressions for randconfig kernels by not tracking dependencies between the components right. This patch tries to rectify that: * the mach-vexpress code cannot link without the syscfg driver, which in turn needs MFD_VEXPRESS_SYSREG * various drivers call devm_regmap_init_vexpress_config(), which has to be exported so it can be used by loadable modules * the configuration bus uses OF DT helper functions that are not available to platforms disable CONFIG_OF * The sysreg driver exports GPIOs through gpiolib, which can be disabled on some platforms. * The clocksource code cannot be built on platforms that don't use modern timekeeping but rely on gettimeoffset. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-24bus: add Broadcom GISB bus arbiter timeout/error handlerFlorian Fainelli
This patch adds support for the Broadcom GISB arbiter bus timeout/error handler. GISB is a proprietary bus used by Broadcom Set Top Box System-on-a-chip devices (BCM7xxx) which allows multiple masters and clients to be interfaced with each other. The bus arbiter offers support for generating two interrupts towards the host CPU, thus allowing us to "catch" clock gated masters, or masters being volontarily blocked for powersaving purposes, or do general system troubleshooting. We also register a hook with the ARM fault exception handling to allow printing a more informative message than "imprecise external abort at 0x00000000" for instance. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-15mfd: vexpress: Convert custom func API to regmapPawel Moll
Components of the Versatile Express platform (configuration microcontrollers on motherboard and daughterboards in particular) talk to each other over a custom configuration bus. They provide miscellaneous functions (from clock generator control to energy sensors) which are represented as platform devices (and Device Tree nodes). The transactions on the bus can be generated by different "bridges" in the system, some of which are universal for the whole platform (for the price of high transfer latencies), others restricted to a subsystem (but much faster). Until now drivers for such functions were using custom "func" API, which is being replaced in this patch by regmap calls. This required: * a rework (and move to drivers/bus directory, as suggested by Samuel and Arnd) of the config bus core, which is much simpler now and uses device model infrastructure (class) to keep track of the bridges; non-DT case (soon to be retired anyway) is simply covered by a special device registration function * the new config-bus driver also takes over device population, so there is no need for special matching table for of_platform_populate nor "simple-bus" hack in the arm64 model dtsi file (relevant bindings documentation has been updated); this allows all the vexpress devices fit into normal device model, making it possible to remove plenty of early inits and other hacks in the near future * adaptation of the syscfg bridge implementation in the sysreg driver, again making it much simpler; there is a special case of the "energy" function spanning two registers, where they should be both defined in the tree now, but backward compatibility is maintained in the code * modification of the relevant drivers: * hwmon - just a straight-forward API change * power/reset driver - API change * regulator - API change plus error handling simplification * osc clock driver - this one required larger rework in order to turn in into a standard platform driver Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mike Turquette <mturquette@linaro.org>
2014-05-05bus: omap_l3_noc: Add AM4372 interconnect error dataAfzal Mohammed
Add AM4372 information to handle L3 error. AM4372 has two clk domains 100f and 200s. Provide flagmux and data associated with it. NOTE: Timeout doesn't have STDERRLOG_MAIN register. And per hardware team, L3 timeout error cannot be cleared the normal way (by setting bit 31 in STDERRLOG_MAIN), instead it may be required to do system reset. L3 error handler can't help in such scenarios. Hence indicate timeout target offset as L3_TARGET_NOT_SUPPORTED as done for undocumented bits. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: Add DRA7 interconnect error dataRajendra Nayak
DRA7 is distinctly different from OMAP4 in terms of masters and clock domain organization. There two main clock domains which is divided as follows: <0x44000000 0x1000000> is clk1 and clk2 is the sub clock domain <0x45000000 0x1000> is clk3 Add all the data needed to handle L3 error handling on DRA7 devices and mark clk2 as subdomain and provide a compatible flag for functionality. Other than the data difference the hardware blocks involved are essentially the same. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [nm@ti.com: bugfixes and generic improvements, documentation] Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: introduce concept of submoduleNishanth Menon
While OMAP4 and OMAP5 had 3 separate clock domains, DRA7 has only 2 and the first one then is internally divided into 2 sub clock domains. To better represent this in the driver, we use the concept of submodule. The address defintions in the devicetree is as per the high level clock domain(module) base, the sub clockdomain/subdomain which shares the same register space of a clockdomain is marked in the SoC data as L3_BASE_IS_SUBMODULE. L3_BASE_IS_SUBMODULE is used as an indication that it's base address is the same as the parent module and offsets are considered from the same base address as they are usually intermingled. Other than the base address, the submodule is same as a module as it is functionally so. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: Add information about the context of operationNishanth Menon
L3 error may be triggered using Debug interface (example JTAG) or due to other errors, for example an opcode fetch (due to function pointer or stack corruption) or a data access (due to some other failure). NOC registers contain additional information to help aid debug information. With this, we can enhance the error information to more detailed form: " L3 Custom Error: MASTER MPU TARGET L4PER2 (Read): Data Access in User mode during Functional access " Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: add information about the type of operationNishanth Menon
Today we get error such as L3 Custom Error: MASTER MPU TARGET L4PER2 But since the actual instruction triggerring the error Vs the point at which we report error may not be aligned, it makes sense to try and provide additional information - example the type of operation that was attempted to being performed can help narrow the debug down further. This helps provide log such as: L3 Custom Error: MASTER MPU TARGET L4PER2 (Read) Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: ignore masked out unclearable targetsAfzal Mohammed
Errors that cannot be cleared (determined by reading REGERR register) are currently handled by masking it. Documentation states that REGERR "Checks which application/debug error sources are active" - it does not indicate that this is "interrupt status" - masked out status represented eventually in the irq line to MPU. For example: Lets say module 0 bit 8(0x100) was unclearable, we do the mask it from generating further errors. However in the following cases: a) bit 9 of Module 0 OR b) any bit of Module 1+ occur, the interrupt handler wrongly assumes that the raw interrupt status of module 0 bit 8 is the root cause of the interrupt, and returns. This causes unhandled interrupt and resultant infinite interrupts. Fix this scenario by storing the events we masked out and masking raw status with masked ones before identifying and handling the error. Reported-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Tested-by: Vaibhav Hiremath <hvaibhav@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: improve readability by using helper for slave event parsingNishanth Menon
Current interrupt handler does the first level parse to identify the slave and then handles the slave even identification, reporting and clearing of event as well. It is hence logical to split the handler into two where the primary handler just parses the flagmux till it identifies a slave and the slave handling, reporting and clearing is done in a helper function. While at it update the documentation in kerneldoc style. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: make error reporting and handling commonNishanth Menon
The logic between handling CUSTOM_ERROR and STANDARD_ERROR is just the reporting style. So make it generic, simplify and standardize the reporting with both master and target information printed to log. Handle the register address difference for master code for standard error and custom error as well. While at it, fix a minor indentation error. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: fix masterid detectionNishanth Menon
As per Documentation (OMAP4+), then masterid is infact encoded as follows: "L3_TARG_STDERRLOG_MSTADDR[7:0] STDERRLOG_MSTADDR stores the NTTP master address. The master address is the concatenation of Prefix & Initiator ConnID. It is defined on 8 bits. The 6 MSBs are used to distinguish the different initiators." So, when we matchup currently with the master ID list, we never get a proper match other than when MPU is the master (thanks to 0). Now, on other platforms such as AM437x, this tends to be bits[5:0]. Fix this by using the relevant 6MSBits to identify the master ID for standard and custom errors. Reported-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: convert flagmux information into a structureNishanth Menon
This allows us to encompass target information and flag mux offset that points to the target information into a singular structure. This saves us the need to look up two different arrays indexed by module ID for information. This allows us to reduce the static target information allocation to just the ones that are documented. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: use of_match_data to pick up SoC informationSricharan R
DRA7xx SoC has the same l3-noc interconnect ip (as OMAP4 and OMAP5), but AM437x SoC has just 2 modules instead of 3 which other SoCs have. So, stop using direct access of array indices and use of->match data and simplify implementation to benefit future usage. While at it, rename a few very generic variables to make them omap specific. This helps us differentiate from DRA7 and AM43xx data in the future. NOTE: None of the platforms that use omap_l3_noc are non-device tree anymore. So, it is safe to assume OF match here. Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> [nm@ti.com: split, refactor and optimize logic] Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: Add support for discountinous flag mux input numbersRajendra Nayak
On DRA7, unlike on OMAP4 and OMAP5, the flag mux input numbers used to indicate the source of errors are not continous. Have a way in the driver to catch these and WARN the user of the flag mux input thats either undocumented or wrong. In the similar vein, Timeout errors in AM43x can't be cleared per h/w team, neither does it have a STDERRLOG_MAIN to clear the error. Further, the mux bit offset might not even be indexed into our array of known mux input description, in which case we'd have a abort. So, define a static range check for bit description and any definition which has target_name set to NULL (the ones that are not populated or ones that are specifically marked in the case of discontinous input numbers), can handle the same gracefully. Upon occurance of error from such sources, mask it. Otherwise, we'd have an infinite interrupt source without any means to clear it. NOTE: follow on patch ensures that these masked bits are ignored. [nm@ti.com: rebase, squash and improve] Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: convert target information into a structureNishanth Menon
Currently the target instance information is organized indexed by bit field offset into multiple arrays. 1. We currently have offsets specific to each target associated with each clock domains are in seperate arrays: l3_targ_inst_clk1 l3_targ_inst_clk2 l3_targ_inst_clk3 2. Then they are organized per master index in l3_targ. 3. We have names in l3_targ_inst_name as an array to array of strings corresponding to the above with offsets. Simplify the same by defining a structure for information containing both target offset and name. this is then stored in arrays per domain and organized into an array indexed off domain. The array is still indexed based on bit field offset. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: move L3 master data structure outNishanth Menon
Move the L3 master structure out of the static definition to enable reuse for other SoCs. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: un-obfuscate l3_targ address computationNishanth Menon
just simplify derefencing that is equivalent. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: switch over to relaxed variants of readl/writelNishanth Menon
Currently we use __raw_readl and writel in this driver. Considering there is no specific need for a memory barrier, replacing writel with endian-neutral writel_relaxed and replacing __raw_readls with the corresponding endian-neutral readl_relaxed allows us to have a standard set of register operations for the driver. While at it, simplify address computation using variables for register. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: populate l3->dev and use itNishanth Menon
l3->dev is not populated, so populate it and use it to print information relevant to the device instead of using a generic pr_*. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: remove iclk from omap_l3 structNishanth Menon
we do not use iclk directly anymore. And, even if we had to, we should be using pm_runtime APIs to do the same to be completely SoC independent. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: rename functions and data to omap_l3Sricharan R
Since omap_l3_noc driver is now being used for OMAP5 and reusable with DRA7 and AM437x, using omap4 specific naming is misleading. Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05bus: omap_l3_noc: Fix copyright informationNishanth Menon
This is an embarrassing patch :(. Texas Corporation does not make OMAP. Texas Instruments Inc does. For that matter I dont seem to be able to find a Texas Corporation on the internet either. While at it, update coverage to the current year and update the template to remove redundant information and use the standard boiler plate licensing. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05drivers: bus: omap_l3: Change pr_crit() to dev_err() when IRQ request failsPeter Ujfalusi
Use dev_err() which will going to print the driver's name as well and the KERN_ERR level is sufficient in this case (we also print via dev_err when there is an error with the mem resources) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05drivers: bus: omap_l3: Remove the platform driver's remove functionPeter Ujfalusi
It is NOP after the devm_* conversion. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05drivers: bus: omap_l3: Convert to use devm_request_irq()Peter Ujfalusi
With this we can remove the free_irq() calls from probe and remove. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05drivers: bus: omap_l3: Convert to use devm_ioremap_resource()Peter Ujfalusi
We can then remove the iounmap() calls from probe and remove. Since the driver requests the resources via index we can do the mem resource request within a for loop. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05drivers: bus: omap_l3: Convert to use devm_kzallocPeter Ujfalusi
We can remove the kfree() calls from probe and remove. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-04-24bus: mvebu: pass the coherency availability information at init timeThomas Petazzoni
Until now, the mvebu-mbus was guessing by itself whether hardware I/O coherency was available or not by poking into the Device Tree to see if the coherency fabric Device Tree node was present or not. However, on some upcoming SoCs, the presence or absence of the coherency fabric DT node isn't sufficient: in CONFIG_SMP, the coherency can be enabled, but not in !CONFIG_SMP. In order to clean this up, the mvebu_mbus_dt_init() function is extended to get a boolean argument telling whether coherency is enabled or not. Therefore, the logic to decide whether coherency is available or not now belongs to the core SoC code instead of the mvebu-mbus driver itself, which is much better. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397483228-25625-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-24bus: mvebu-mbus: allow several windows with the same target/attributeThomas Petazzoni
Having multiple windows with the same target and attribute is actually legal, and can be useful for PCIe windows, when PCIe BARs have a size that isn't a power of two, and we therefore need to create several MBus windows to cover the PCIe BAR for a given PCIe interface. Fixes: fddddb52a6c4 ('bus: introduce an Marvell EBU MBus driver') Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397823593-1932-7-git-send-email-thomas.petazzoni@free-electrons.com Tested-by: Neil Greatorex <neil@fatboyfat.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-24bus: mvebu-mbus: Avoid setting an undefined window sizeJason Gunthorpe
The mbus hardware requires a power of two size, and size aligned base. Currently, if a non-power of two is passed in to the low level routines they configure the register in a way that results in undefined behaviour. Call WARN and return EINVAL instead. Also, update the debugfs routines to show a message if there is an invalid register setting. All together this makes the recent problems with silent failure of PCI very obvious, noisy and debuggable. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397823593-1932-6-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-05Merge tag 'drivers-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
2014-04-05Merge tag 'soc-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "Lots of changes specific to one of the SoC families. Some that stick out are: - mach-qcom gains new features, most importantly SMP support for the newer chips (Stephen Boyd, Rohit Vaswani) - mvebu gains support for three new SoCs: Armada 375, 380 and 385 (Thomas Petazzoni and Free-electrons team) - SMP support for Rockchips (Heiko Stübner) - Lots of i.MX changes (Shawn Guo) - Added support for BCM5301x SoC (Hauke Mehrtens) - Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn and Sebastian Hesselbarth doing the final part of a long journey) - Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd Bergmann)" * tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits) ARM: sunxi: Select HAVE_ARM_ARCH_TIMER ARM: cache-tauros2: remove ARMv6 code ARM: mvebu: don't select CONFIG_NEON ARM: davinci: fix DT booting with default defconfig ARM: configs: bcm_defconfig: enable bcm590xx regulator support ARM: davinci: remove tnetv107x support MAINTAINERS: Update ARM STi maintainers ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE ARM: bcm21664: Add board support. ARM: sunxi: Add the new watchog compatibles to the reboot code ARM: enable ARM_HAS_SG_CHAIN for multiplatform ARM: davinci: remove da8xx_omapl_defconfig ARM: davinci: da8xx: fix multiple watchdog device registration ARM: davinci: add da8xx specific configs to davinci_all_defconfig ARM: davinci: enable da8xx build concurrently with older devices ARM: BCM5301X: workaround suppress fault ARM: BCM5301X: add early debugging support ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU ARM: mach-bcm: Remove GENERIC_TIME ARM: shmobile: APMU: Fix warnings due to improper printk formats ...
2014-03-17Merge tag 'mvebu-drivers-3.15-2' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/drivers Merge "mvebu drivers for v3.15" from Jason Cooper: pull request #1: - mvebu mbus - use of_find_matching_node_and_match - rtc - use PTR_ERR_OR_ZERO in isl12057 - work around issue in mv where date returned is 2038 - kirkwood -> mach-mvebu - various Kconfig oneliners to allow building kirkwood in -mvebu/ pull request #2: - reset - re-use qnap-poweroff driver for Synology NASs * tag 'mvebu-drivers-3.15-2' of git://git.infradead.org/linux-mvebu: Power: Reset: Generalize qnap-poweroff to work on Synology devices. drivers: Enable building of Kirkwood drivers for mach-mvebu rtc: mv: reset date if after year 2038 rtc: isl12057: use PTR_ERR_OR_ZERO to fix coccinelle warnings bus: mvebu-mbus: make use of of_find_matching_node_and_match Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-05bus: imx-weim: support CS GPR configurationShawn Guo
For imx50-weim and imx6q-weim type of devices, there might a WEIM CS space configuration register in General Purpose Register controller, e.g. IOMUXC_GPR1 on i.MX6Q. Depending on which configuration of the following 4 is chosen for given system, IOMUXC_GPR1[11:0] should be set up as 05, 033, 0113 or 01111 correspondingly. CS0(128M) CS1(0M) CS2(0M) CS3(0M) CS0(64M) CS1(64M) CS2(0M) CS3(0M) CS0(64M) CS1(32M) CS2(32M) CS3(0M) CS0(32M) CS1(32M) CS2(32M) CS3(32M) The patch creates a function for such type of devices, which scans 'ranges' property of WEIM node and build the GPR value incrementally. Thus the WEIM CS GPR can be set up automatically at boot time. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Philippe De Muyter <phdm@macqel.be>
2014-02-25drivers: cci: Export CCI PMU revisionPunit Agrawal
The event numbering changed between revision r0 and r1 of the CCI PMU. Expose this to userspace to allow tooling to handle the differences in event numbers. Suggested-by: Drew Richardson <Drew.Richardson@arm.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-25drivers: cci: Extend support to CCI revisions > r1p2Punit Agrawal
The driver queries the CCI IP revision to distinguish between r0 and r1 scheme for event numbers and currently supports upto version r1p2. To minimise code churn every time there's a new version of the IP, assume that event numbering doesn't change for revisions > r1p0 (which is the case). The driver will still need an update for future revisions that change the event numbers. Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-18bus: mvebu-mbus: Fix incorrect size for PCI aperture resourcesJason Gunthorpe
reg[0] is the DT base, reg[1] is the DT length in bytes, struct resource.end is the inclusive end address, so a -1 is required. Tested on kirkwood. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-02-11bus: mvebu-mbus: make use of of_find_matching_node_and_matchJosh Cartwright
Instead of the of_find_matching_node()/of_match_node() pair, which requires two iterations through the match table, make use of of_find_matching_node_and_match(), which only iterates through the table once. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-01-31drivers: bus: fix CCI driver kcalloc call parameters swapLorenzo Pieralisi
This patch fixes a bug/typo in the CCI driver kcalloc usage that inadvertently swapped the parameters order in the kcalloc call and went unnoticed. Reported-by: Xia Feng <xiafeng@allwinnertech.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-11-24bus: mvebu-mbus: Remove deprecated commentEzequiel Garcia
Remove a comment about the lack of a devicetree binding: this driver's binding is already implemented and in use. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-24bus: mvebu-mbus: potential forever loop in mvebu_mbus_init()Dan Carpenter
"of_id->compatible" is an array and not a pointer so it can never be NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-14Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
2013-11-11Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM driver updates from Olof Johansson: "Updates of SoC-near drivers and other driver updates that makes more sense to take through our tree. In this case it's involved: - Some Davinci driver updates that has required corresponding platform code changes (gpio mostly) - CCI bindings and a few driver updates - Marvell mvebu patches for PCI MSI support (could have gone through the PCI tree for this release, but they were acked by Bjorn for 3.12 so we kept them through arm-soc). - Marvell dove switch-over to DT-based PCIe configuration - Misc updates for Samsung platform dmaengine drivers" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits) ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442 dmaengine: s3c24xx-dma: add support for the s3c2410 type of controller ARM: S3C24XX: Fix possible dma selection warning PCI: mvebu: make local functions static PCI: mvebu: add I/O access wrappers PCI: mvebu: Dynamically detect if the PEX link is up to enable hot plug ARM: mvebu: fix gated clock documentation ARM: dove: remove legacy pcie and clock init ARM: dove: switch to DT probed mbus address windows ARM: SAMSUNG: set s3c24xx_dma_filter for s3c64xx-spi0 device ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443 dmaengine: add driver for Samsung s3c24xx SoCs ARM: S3C24XX: number the dma clocks PCI: mvebu: add support for Marvell Dove SoCs PCI: mvebu: add support for reset on GPIO PCI: mvebu: remove subsys_initcall PCI: mvebu: increment nports only for registered ports PCI: mvebu: move clock enable before register access PCI: mvebu: add support for MSI irqchip: armada-370-xp: implement MSI support ...
2013-10-19ARM: cci driver need big endian fixes in asm codeVictor Kamensky
cci_enable_port_for_self written in asm and it works with h/w registers that are in little endian format. When run in big endian mode it needs byteswaped constants before/after it writes/reads to/from such registers Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>