summaryrefslogtreecommitdiff
path: root/drivers/bus
AgeCommit message (Collapse)Author
2019-12-06Merge tag 'omap-for-v5.5/ti-sysc-late-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few ti-sysc related fixes for v5.5 merge window Just few minor changes that can be merged when suitable, but would be good to have these in v5.5-rc1 to remove dependencies between branches for more changes later on in v5.6: - Add quirk handling for AESS (Audio Engine Sub System) - We want to drop the useless gptimer option for omap4 as there are local timers - A minor error path handling improvment for sysc_child_add_named_clock() that will make further patching a bit easier * tag 'omap-for-v5.5/ti-sysc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock() ARM: OMAP2+: Drop useless gptimer option for omap4 bus: ti-sysc: Add module enable quirk for audio AESS Link: https://lore.kernel.org/r/pull-1574273726-31367@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Olof Johansson: "Various driver updates for platforms: - A larger set of work on Tegra 2/3 around memory controller and regulator features, some fuse cleanups, etc.. - MMP platform drivers, in particular for USB PHY, and other smaller additions. - Samsung Exynos 5422 driver for DMC (dynamic memory configuration), and ASV (adaptive voltage), allowing the platform to run at more optimal operating points. - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas - Clock/reset control driver for TI/OMAP - Meson-A1 reset controller support - Qualcomm sdm845 and sda845 SoC IDs for socinfo" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits) firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT soc: fsl: add RCPM driver dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition memory: tegra: Consolidate registers definition into common header memory: tegra: Ensure timing control debug features are disabled memory: tegra: Introduce Tegra30 EMC driver memory: tegra: Do not handle error from wait_for_completion_timeout() memory: tegra: Increase handshake timeout on Tegra20 memory: tegra: Print a brief info message about EMC timings memory: tegra: Pre-configure debug register on Tegra20 memory: tegra: Include io.h instead of iopoll.h memory: tegra: Adapt for Tegra20 clock driver changes memory: tegra: Don't set EMC rate to maximum on probe for Tegra20 memory: tegra: Add gr2d and gr3d to DRM IOMMU group memory: tegra: Set DMA mask based on supported address bits soc: at91: Add Atmel SFR SN (Serial Number) support memory: atmel-ebi: switch to SPDX license identifiers memory: atmel-ebi: move NUM_CS definition inside EBI driver soc: mediatek: Refactor bus protection control soc: mediatek: Refactor sram control ...
2019-11-27Merge tag 'staging-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / iio updates from Greg KH: "Here is the big staging and iio set of patches for the 5.5-rc1 release. It's the usual huge collection of cleanup patches all over the drivers/staging/ area, along with a new staging driver, and a bunch of new IIO drivers as well. Full details are in the shortlog, but all of these have been in linux-next for a long time with no reported issues" * tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (548 commits) staging: vchiq: Have vchiq_dump_* functions return an error code staging: vchiq: Refactor indentation in vchiq_dump_* functions staging: fwserial: Fix Kconfig indentation (seven spaces) staging: vchiq_dump: Replace min with min_t staging: vchiq: Fix block comment format in vchiq_dump() staging: octeon: indent with tabs instead of spaces staging: comedi: usbduxfast: usbduxfast_ai_cmdtest rounding error staging: most: core: remove sysfs attr remove_link staging: vc04: Fix Kconfig indentation staging: pi433: Fix Kconfig indentation staging: nvec: Fix Kconfig indentation staging: most: Fix Kconfig indentation staging: fwserial: Fix Kconfig indentation staging: fbtft: Fix Kconfig indentation fbtft: Drop OF dependency fbtft: Make use of device property API fbtft: Drop useless #ifdef CONFIG_OF and dead code fbtft: Describe function parameters in kernel-doc fbtft: Make sure string is NULL terminated staging: rtl8723bs: remove set but not used variable 'change', 'pos' ...
2019-11-14bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock()Markus Elfring
Add a jump target so that a call of the function “clk_put” can be better reused at the end of this function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-11-14bus: ti-sysc: Add module enable quirk for audio AESSTony Lindgren
We must set the autogating bit on enable for AESS (Audio Engine SubSystem) when probed with ti-sysc interconnect target module driver. Otherwise it won't idle properly. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-11-11Merge tag 'hisi-drivers-for-5.5' of git://github.com/hisilicon/linux-hisi ↵Olof Johansson
into arm/drivers ARM64: hisi: SoC driver updates for 5.5 - check the LOGIC_PIO_INDIRECT region ops at registration instead of in the IO port accessors to optimise the lib/ligic_pio.c - add the hisi LPC driver to the build test for the other architectures except ALPHA, C6X, HEXAGON and PARISC as they do not define {read,write}sb by updating the hisi LPC Kconfig and adding a dummy PIO_INDIRECT_SIZE - clean the sparse complains of the hisi LPC driver - build logic_pio into a lib to avoid including in the vmlinux when not referenced * tag 'hisi-drivers-for-5.5' of git://github.com/hisilicon/linux-hisi: logic_pio: Build into a library bus: hisi_lpc: Expand build test coverage bus: hisi_lpc: Clean some types logic_pio: Define PIO_INDIRECT_SIZE for !CONFIG_INDIRECT_PIO lib: logic_pio: Enforce LOGIC_PIO_INDIRECT region ops are set at registration Link: https://lore.kernel.org/r/5DC959B9.80301@hisilicon.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-05bus: hisi_lpc: Expand build test coverageJohn Garry
Currently the driver will only ever be built for ARM64 because it selects CONFIG_INDIRECT_PIO, which itself depends on ARM64. Expand build test coverage for the driver to other architectures by only selecting CONFIG_INDIRECT_PIO for ARM64, when we really want it. We don't include ALPHA, C6X, HEXAGON, and PARISC architectures as they don't define {read, write}sb. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-11-05bus: hisi_lpc: Clean some typesJohn Garry
Sparse complains of these: drivers/bus/hisi_lpc.c:82:38: warning: incorrect type in argument 1 (different address spaces) drivers/bus/hisi_lpc.c:82:38: expected void const volatile [noderef] <asn:2>*addr drivers/bus/hisi_lpc.c:82:38: got unsigned char * drivers/bus/hisi_lpc.c:131:35: warning: incorrect type in argument 1 (different address spaces) drivers/bus/hisi_lpc.c:131:35: expected unsigned char *mbase drivers/bus/hisi_lpc.c:131:35: got void [noderef] <asn:2>*membase drivers/bus/hisi_lpc.c:186:35: warning: incorrect type in argument 1 (different address spaces) drivers/bus/hisi_lpc.c:186:35: expected unsigned char *mbase drivers/bus/hisi_lpc.c:186:35: got void [noderef] <asn:2>*membase drivers/bus/hisi_lpc.c:228:16: warning: cast to restricted __le32 drivers/bus/hisi_lpc.c:251:13: warning: incorrect type in assignment (different base types) drivers/bus/hisi_lpc.c:251:13: expected unsigned int [unsigned] [usertype] val drivers/bus/hisi_lpc.c:251:13: got restricted __le32 [usertype] <noident> Clean them up. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01Merge tag 'iio-for-5.5b' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Second set of IIO + counter new device support, features etc for the 5.5 cycle. Note two merge commits in here, both for immutable branches based of 5.4-rc1. 1. Ti eqep driver because of some file moves in precursor patches. I suspect no one else will pull this one. 2. ab8500 refactor as changes in power supply, hwmon and mfd trees. This may come via numerous trees as well as IIO. Counter subsystem related * ti eqep - New device support with bindings. - Includes prior file move to reflect more general use of ti-pwmss. * Counter core - simplify count_read and count_write callbacks + document change. - fix a typo in docs. Various subsystems related * AB8500 - ab8500_btemp driver converted to be an IIO consumer driver. - ab8500_charger driver converted to be an IIO consumer driver. - ab8500_fg fuel gauge driver converted to be an IIO consumer driver. - ab8500 hwmon driver converted to be an IIO consumer driver. - mfd bindings augmented with the adc channels to make the above work. - drop original mfd driver. New device support * ab8500 - new ADC driver used by the above other subystems via the IIO consumer interface. * adux1020 photometric sensor - new driver and dt bindings. * fxos877cq - new driver for this simple(ish) IMU with DT bindings. * intel_mrfld_adc - new driver for the ADC found on Intel Merrifield platforms. * ltc2983 - new driver for this multi-sensor type temperature interface. Includes complex DT bindings. * max1027 - support for 12 bit devices, max1227, max1229 and max1231 + add to trivial bindings. * st_lsm6dsx - support for the LSM6DS0 6 axis MEMs sensor. Note different from the LSM6DSO which the driver already supports *sigh* - support for the LSM6DSRX 6 axis MEMs sensor. Features and cleanups * ad7303 - replace use of core mlock with a local lock with cleanly defined scope. * ad9834 - add a check for devm_clk_get failing. * at91-sama5d2 - tidy up a 0 as NULL warning. * bmp280 - endian type tidy ups. - use bulk regulator ops for a small reduction in code. - use devm_add_action... to simplify error path handling. * exynos - drop stray semicolon. - use devm_platform_ioremap_resource to reduce boilerplate. * hx711 - various tricks to improve the frequency of read out possible. * max1027 - debugfs support. - make interrupts optional. - reset at probe to get clean state. - refactors to allow addition of new device support. * maxim thermocouple - drop an unneeded semicolon. * mb1232 - yaml binding conversion. * mcp320x - tidy up an endian types in cast warning. * meson_saradc - use devm_platform_ioremap_resource to reduce boilerplate. * mpu3050 - make a poison value explicity big endian to supress a warning. * pulsedlight v2 - endian type tidy ups. * sgp30 - drop an excess semicolon. * sps30 - make truncation explicit with masking to clean up a warning. * st sensors - drop gpio include as none of these support gpios. * st_lsm6dsx - tidy up some alignment issues. - refactors to allow addition of new device support. * allow varients of irq related reg definitions. * avoid accessing active-low, open-drain regs if not provided. * allow varients of bdu/boot and reset regs. * allow for enabling or disabling wakeup sources through platform data (seems someone still uses this). - enable wake-up events for LSM6DS0 - use the drdy mask to avoid some invalid samples during initial start of sensor. - Add support to trim the timestamp. * stm32_adc - kernel-doc fixes. * stm32_dac - power management support. * stmpe-adc - Fix endian type of local variable. * twl4030 - use false / true instead of 0 / 1 for booleans. * xilinx-xadc - use devm_platform_ioremap_resouce to reduce boilerplate. * zpa2326 - reorganise buffer handling setup to be more consistent. Fixes (mostly recent additions) * cpcap-adc - Fix mising IRQF_ONESHOT that would cause warnings to be printed. * st_lsm6dsx - Sanity check the read_fifo pointer is set. - use locked read and update functions to prevent some races. - avoid accessing enable_reg if not provided. - take a lock to prevent a race in updating the config. - kernel-doc fixes. - document wakeup-source property in dt binding. - fix lsm9ds1 gyro gain definitions. * tag 'iio-for-5.5b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (73 commits) dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings iio: imu: st_lsm6dsx: add support to LSM6DSRX iio: st: Drop GPIO include iio: adc: hx711: optimize performance in read cycle iio: adc: stm32-adc: fix kernel-doc warnings iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position iio: chemical: sgp30: drop excess semicolon iio: adc: twl4030: Use false / true instead of 0 / 1 with booleans dt-bindings: iio: Add ltc2983 documentation iio: temperature: Add support for LTC2983 iio: pressure: bmp280: use devm action and remove labels from probe iio: pressure: bmp280: use bulk regulator ops iio: imu: Add support for the FXOS8700 IMU dt-bindings: iio: imu: add fxos8700 imu binding staging: iio: ad9834: add a check for devm_clk_get iio: adc: xilinx-xadc: use devm_platform_ioremap_resource iio: temp: maxim thermocouple: Drop unneeded semi colon. iio: adc: cpcap-adc: Fix missing IRQF_ONESHOT as only threaded handler. iio: adc: meson_saradc: use devm_platform_ioremap_resource iio: adc: exynos: use devm_platform_ioremap_resource ...
2019-10-31bus: fsl-mc: add the fsl_mc_get_endpoint functionIoana Ciornei
Using the newly added fsl_mc_get_endpoint function a fsl-mc driver can find its associated endpoint (another object at the other link of a MC firmware link). The API will be used in the following patch in order to discover the connected DPMAC object of a DPNI. Also, the fsl_mc_device_lookup function is made available to the entire fsl-mc bus driver and not just for the dprc driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31bus: fsl-mc: export device types present on the busIoana Ciornei
Export all device types present on the fsl-mc bus in order to be able to actually use the is_fsl_mc_bus_*() functions from drivers on the bus. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21bus: ti-sysc: Use swsup quirks also for am335x musbTony Lindgren
Also on am335x we need the swsup quirks for musb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-21bus: ti-sysc: Handle mstandby quirk and use it for musbTony Lindgren
We need swsup quirks for sidle and mstandby for musb to work properly. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-18Merge branch 'watchdog-fix' into omap-for-v5.5/ti-syscTony Lindgren
2019-10-18bus: ti-sysc: Fix watchdog quirk handlingTony Lindgren
I noticed that when probed with ti-sysc, watchdog can trigger on am3, am4 and dra7 causing a device reset. Turns out I made several mistakes implementing the watchdog quirk handling: 1. We must do both writes to spr register 2. We must also call the reset quirk on disable 3. On am3 and am4 we need to also set swsup quirk flag I probably only tested this earlier with watchdog service running when the watchdog never gets disabled. Fixes: 4e23be473e30 ("bus: ti-sysc: Add support for module specific reset quirks") Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-17counter: new TI eQEP driverDavid Lechner
This adds a new counter driver for the Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP) module. Only very basic functionality is currently implemented - only enough to be able to read the position. The actual device has many more features which can be added to the driver on an as-needed basis. It is not possible to read the QEPA/B signal values in hardware, so that feature is omitted. The TI_PWMSS kernel option is selected in Kconfig to enable the parent bus, which is needed for power management. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-17bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystemDavid Lechner
The TI PWMSS driver is a simple bus driver for providing power power management for the PWM peripherals on TI AM33xx SoCs, namely eCAP, eHRPWM and eQEP. The eQEP is a counter rather than a PWM, so it does not make sense to have the bus driver in the PWM subsystem since the PWMSS is not exclusive to PWM devices. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-08bus: ti-sysc: avoid toggling power state of module during probeTero Kristo
Current implementation for ti-sysc powers down the module once module init is complete. However, right after power is disabled, it is enabled via runtime PM. This is unnecessary so avoid it by re-ordering the events a bit; move powering down of the module post runtime PM enable which makes sure the use counts are maintained properly and there is no extra power down/up sequence for the module. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-08bus: ti-sysc: drop the extra hardreset during initTero Kristo
There seems to be unnecessary extra hardreset line toggling applied during module init. This is unnecessary, as the reset lines are already asserted during boot, and it can cause certain modules to hang (iommus, remoteprocs.) Remove the extra hardreset toggle, and remove the now redundant function to handle this also. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-08bus: ti-sysc: re-order reset and main clock controlsTero Kristo
The main clocks and reset controls have a hardware level dependency, where one can't transition state without the other one transitioning. Because we don't have the dependency implemented in software, we must ensure the ordering of these two is done properly; they way this is handled is that clocks transition on software level without delay, and the status is only polled on reset side. Because of this, we must re-order the main clock and reset handling on the ti-sysc driver. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-30Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A few fixes that have trickled in through the merge window: - Video fixes for OMAP due to panel-dpi driver removal - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7 - Fixing arch version on ASpeed ast2500 - Two fixes for reset handling on ARM SCMI" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: aspeed: ast2500 is ARMv6K reset: reset-scmi: add missing handle initialisation firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks
2019-09-29Merge tag 'fixes-5.4-merge-window' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omap variants Few fixes for ti-sysc interconnect target module driver for no-idle quirks that caused nfsroot to fail on some dra7 boards. And let's fixes to get LCD working again for logicpd board that got broken a while back with removal of panel-dpi driver. We need to now use generic CONFIG_DRM_PANEL_SIMPLE instead. * tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-09-20Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC late updates from Arnd Bergmann: "This is some material that we picked up into our tree late or that had complex inter-depondencies. The fact that there are these interdependencies tends to meant that these are often actually the most interesting new additions: - The new Aspeed AST2600 baseboard management controller is added, this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and had some dependencies on other device drivers. - After many years, support for the MMP2 based OLPC XO-1.75 finally makes it into the kernel. - The Armada 3720 based Turris Mox open source router platform is a late addition and it follows some preparatory work across multiple branches. - The OMAP2+ platform had some large-scale cleanup involving driver changes and DT changes, here we finish it off, dropping a lot of the now-unused platform data. - The TI K3 platform that got added for 5.3 gains a lot more support for individual bits on the SoC, this part just came late for the merge window" [ This pull request itself wasn't actually sent late at all by Arnd, but I waited on the branches that it used to be pulled first, so it ends up being merged much later than the other ARM SoC pull requests this merge window - Linus ] * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) ARM: dts: dir685: Drop spi-cpol from the display ARM: dts: aspeed: Add AST2600 pinmux nodes ARM: dts: aspeed: Add AST2600 and EVB ARM: exynos: Enable support for ARM architected timers ARM: samsung: Fix system restart on S3C6410 ARM: dts: mmp2: add OLPC XO 1.75 machine ARM: dts: mmp2: rename the USB PHY node ARM: dts: mmp2: specify reg-shift for the UARTs ARM: dts: mmp2: add camera interfaces ARM: dts: mmp2: fix the SPI nodes ARM: dts: mmp2: trivial whitespace fix arm64: dts: marvell: add DTS for Turris Mox dt-bindings: marvell: document Turris Mox compatible arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address arm64: dts: ti: k3-j721e-main: Add hwspinlock node arm64: dts: ti: k3-am65-main: Add hwspinlock node arm64: dts: k3-j721e: Add gpio-keys on common processor board dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E ...
2019-09-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "This contains driver changes that are tightly connected to SoC specific code. Aside from smaller cleanups and bug fixes, here is a list of the notable changes. New device drivers: - The Turris Mox router has a new "moxtet" bus driver for its on-board pluggable extension bus. The same platform also gains a firmware driver. - The Samsung Exynos family gains a new Chipid driver exporting using the soc device sysfs interface - A similar socinfo driver for Qualcomm Snapdragon chips. - A firmware driver for the NXP i.MX DSP IPC protocol using shared memory and a mailbox Other changes: - The i.MX reset controller driver now supports the NXP i.MX8MM chip - Amlogic SoC specific drivers gain support for the S905X3 and A311D chips - A rework of the TI Davinci framebuffer driver to allow important cleanups in the platform code - A couple of device drivers for removed ARM SoC platforms are removed. Most of the removals were picked up by other maintainers, this contains whatever was left" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) bus: uniphier-system-bus: use devm_platform_ioremap_resource() soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access firmware: ti_sci: Allow for device shared and exclusive requests bus: imx-weim: remove incorrect __init annotations fbdev: remove w90x900/nuc900 platform drivers spi: remove w90x900 driver net: remove w90p910-ether driver net: remove ks8695 driver firmware: turris-mox-rwtm: Add sysfs documentation firmware: Add Turris Mox rWTM firmware driver dt-bindings: firmware: Document cznic,turris-mox-rwtm binding bus: moxtet: fix unsigned comparison to less than zero bus: moxtet: remove set but not used variable 'dummy' ARM: scoop: Use the right include dt-bindings: power: add Amlogic Everything-Else power domains bindings soc: amlogic: Add support for Everything-Else power domains controller fbdev: da8xx: use resource management for dma fbdev: da8xx-fb: drop a redundant if fbdev: da8xx-fb: use devm_platform_ioremap_resource() ...
2019-09-06bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()Tony Lindgren
Commit d098913a10f8 ("bus: ti-sysc: Fix clock handling for no-idle quirks") fixed handling for no-idle quirk modules that are not enabled by the bootloader. But it also caused unpaired clockdomain calls that won't allow idling the system. That's because clkdm_allow_idle_nolock() and clkdm_deny_idle_nolock() have usage count with clkdm->forcewake_count. Let's drop the unpaired sysc_clkdm_deny_idle() to fix idling of devices. Fixes: d098913a10f8 ("bus: ti-sysc: Fix clock handling for no-idle quirks") Cc: Keerthy <j-keerthy@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-05bus: ti-sysc: Fix handling of invalid clocksTony Lindgren
We can currently get "Unable to handle kernel paging request at virtual address" for invalid clocks with dts node but no driver: (__clk_get_hw) from [<c0138ebc>] (ti_sysc_find_one_clockdomain+0x18/0x34) (ti_sysc_find_one_clockdomain) from [<c0138f0c>] (ti_sysc_clkdm_init+0x34/0xdc) (ti_sysc_clkdm_init) from [<c0584660>] (sysc_probe+0xa50/0x10e8) (sysc_probe) from [<c065c6ac>] (platform_drv_probe+0x58/0xa8) Let's add IS_ERR checks to ti_sysc_clkdm_init() as And let's start treating clk_get() with -ENOENT as a proper error. If the clock name is specified in device tree we must succeed with clk_get() to continue. For modules with no clock names specified in device tree we will just ignore the clocks. Fixes: 2b2f7def058a ("bus: ti-sysc: Add support for missing clockdomain handling") Acked-by: Roger Quadros <rogerq@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-05bus: uniphier-system-bus: use devm_platform_ioremap_resource()Masahiro Yamada
Replace the chain of platform_get_resource() and devm_ioremap_resource() with devm_platform_ioremap_resource(). This allows to remove the local variable for (struct resource *), and have one function call less. Link: https://lore.kernel.org/r/20190905032122.26076-1-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-05bus: ti-sysc: Fix clock handling for no-idle quirksTony Lindgren
NFSroot can fail on dra7 when cpsw is probed using ti-sysc interconnect target module driver as reported by Keerthy. Device clocks and the interconnect target module may or may not be enabled by the bootloader on init, but we currently assume the clocks and module are on from the bootloader for "ti,no-idle" and "ti,no-idle-on-init" quirks as reported by Grygorii Strashko. Let's fix the issue by always enabling clocks init, and never disable them for "ti,no-idle" quirk. For "ti,no-idle-on-init" quirk, we must decrement the usage count later on to allow PM runtime to idle the module if requested. Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision") Cc: Keerthy <j-keerthy@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Reported-by: Keerthy <j-keerthy@ti.com> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-04bus: imx-weim: remove incorrect __init annotationsArnd Bergmann
The probe function is no longer __init, so anything it calls now must also be available at runtime, as Kbuild points out when building with clang-9: WARNING: vmlinux.o(.text+0x6e7040): Section mismatch in reference from the function weim_probe() to the function .init.text:imx_weim_gpr_setup() The function weim_probe() references the function __init imx_weim_gpr_setup(). This is often because weim_probe lacks a __init annotation or the annotation of imx_weim_gpr_setup is wrong. WARNING: vmlinux.o(.text+0x6e70f0): Section mismatch in reference from the function weim_probe() to the function .init.text:weim_timing_setup() The function weim_probe() references the function __init weim_timing_setup(). This is often because weim_probe lacks a __init annotation or the annotation of weim_timing_setup is wrong. Remove the remaining __init markings that are now wrong. Fixes: 4a92f07816ba ("bus: imx-weim: use module_platform_driver()") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04bus: moxtet: fix unsigned comparison to less than zeroColin Ian King
Currently the size_t variable res is being checked for an error failure however the unsigned variable is never less than zero so this test is always false. Fix this by making variable res ssize_t Link: https://lore.kernel.org/r/20190822010351.15660-2-marek.behun@nic.cz Addresses-Coverity: ("Unsigned compared against 0") Fixes: 5bc7f990cd98 ("bus: Add support for Moxtet bus") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04bus: moxtet: remove set but not used variable 'dummy'Jason Yan
Fixes gcc '-Wunused-but-set-variable' warning: drivers/bus/moxtet.c: In function moxtet_remove: drivers/bus/moxtet.c:822:6: warning: variable dummy set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20190822010351.15660-3-marek.behun@nic.cz Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04Merge tag 'mvebu-dt64-5.4-2' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
arm/late mvebu dt64 for 5.4 (part 2) Add support for Turris Mox board (Armada 3720 SoC based) * tag 'mvebu-dt64-5.4-2' of git://git.infradead.org/linux-mvebu: (53 commits) arm64: dts: marvell: add DTS for Turris Mox dt-bindings: marvell: document Turris Mox compatible arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl arm64: dts: marvell: Add cpu clock node on Armada 7K/8K arm64: dts: marvell: Convert 7k/8k usb-phy properties to phy-supply arm64: dts: marvell: Add 7k/8k PHYs in PCIe nodes arm64: dts: marvell: Add 7k/8k PHYs in USB3 nodes arm64: dts: marvell: Add 7k/8k per-port PHYs in SATA nodes arm64: dts: marvell: Add CP110 COMPHY clocks arm64: dts: marvell: armada-37xx: add mailbox node dt-bindings: gpio: Document GPIOs via Moxtet bus drivers: gpio: Add support for GPIOs over Moxtet bus bus: moxtet: Add sysfs and debugfs documentation dt-bindings: bus: Document moxtet bus binding bus: Add support for Moxtet bus reset: Add support for resets provided by SCMI firmware: arm_scmi: Add RESET protocol in SCMI v2.0 dt-bindings: arm: Extend SCMI to support new reset protocol firmware: arm_scmi: Make use SCMI v2.0 fastchannel for performance protocol firmware: arm_scmi: Add discovery of SCMI v2.0 performance fastchannels ... Link: https://lore.kernel.org/r/87h85two0r.fsf@FE-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04Merge tag 'omap-for-v5.4/ti-sysc-part2-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late more ti-sysc driver changes for omap variants for v5.4 Few changes mostly to deal with sgx SoC glue quirk for omap36xx that is needed for the related sgx SoC glue dts branch. The other changes are to simplify sysc_check_one_child() sysc_check_children() to be void functions, and detect d2d module when debugging is enabled. * tag 'omap-for-v5.4/ti-sysc-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Detect d2d when debug is enabled bus: ti-sysc: Add module enable quirk for SGX on omap36xx bus: ti-sysc: Change return types of functions Link: https://lore.kernel.org/r/pull-1567016893-318461@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04Merge tag 'omap-for-v5.4/ti-sysc-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late Driver changes for ti-sysc for v5.4 Few changes to prepare for using a reset driver for PRM rstctrl mostly to deal with the clocks for reset. Then few minor clean-up patches and SPDX license identifier changes, and add a MAINTAINERs file entry. * tag 'omap-for-v5.4/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: remove set but not used variable 'quirks' bus: ti-sysc: allow reset sharing across devices bus: ti-sysc: rework the reset handling bus: ti-sysc: re-order the clkdm control around reset handling bus: ti-sysc: Add missing kerneldoc comments bus: ti-sysc: Switch to SPDX license identifier dt-bindings: ti-sysc: Add SPDX license identifier MAINTAINERS: Add ti-sysc files under the OMAP2+ entry Link: https://lore.kernel.org/r/pull-1566599057-142651@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'imx-drivers-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX drivers update for 5.4: - A series from Anson Huang to add UID support for i.MX8 SoC and SCU drivers. - A series from Daniel Baluta to add DSP IPC driver for communication between host AP (Linux) and the firmware running on DSP embedded in i.MX8 SoCs. - A small fix for GPCv2 error code printing. - Switch from module_platform_driver_probe() to module_platform_driver() for imx-weim driver, as we need the driver to probe again when device is present later. - Add optional burst clock mode support for imx-weim driver. * tag 'imx-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: gpcv2: Print the correct error code bus: imx-weim: use module_platform_driver() firmware: imx: Add DSP IPC protocol interface soc: imx-scu: Add SoC UID(unique identifier) support bus: imx-weim: optionally enable burst clock mode firmware: imx: scu-pd: Add IRQSTR_DSP PD range firmware: imx: scu-pd: Add mu13 b side PD range firmware: imx: scu-pd: Rename mu PD range to mu_a soc: imx8: Add i.MX8MM UID(unique identifier) support soc: imx8: Add i.MX8MQ UID(unique identifier) support Link: https://lore.kernel.org/r/20190825153237.28829-1-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'sunxi-drivers-for-5.4-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers Allwinner drivers patches for 5.4 One driver to remove a redundant error message in the Allwinner RSB driver. * tag 'sunxi-drivers-for-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: bus: sunxi-rsb: Remove dev_err() usage after platform_get_irq() Link: https://lore.kernel.org/r/f9edfc8e-19b7-4b6e-897a-35f3bdcc8643.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-29Merge tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi into ↵Arnd Bergmann
arm/fixes Hisilicon fixes for v5.3-rc - Fixed RCU usage in logical PIO - Added a function to unregister a logical PIO range in logical PIO to support the fixes in the hisi-lpc driver - Fixed and optimized hisi-lpc driver to avoid potential use-after-free and driver unbind crash * tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi: bus: hisi_lpc: Add .remove method to avoid driver unbind crash bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free lib: logic_pio: Add logic_pio_unregister_range() lib: logic_pio: Avoid possible overlap for unregistering regions lib: logic_pio: Fix RCU usage Link: https://lore.kernel.org/r/5D562335.7000902@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-26bus: ti-sysc: Detect d2d when debug is enabledTony Lindgren
We want to see what modules probe when debug is enabled. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26bus: ti-sysc: Add module enable quirk for SGX on omap36xxTony Lindgren
Add module enable quirk for SGX needed on omap36xx. Cc: Adam Ford <aford173@gmail.com> Cc: Filip Matijević <filip.matijevic.pz@gmail.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: moaz korena <moaz@korena.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: Philipp Rossak <embed3d@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26bus: ti-sysc: Change return types of functionsNishka Dasgupta
Change return type of functions sysc_check_one_child() and sysc_check_children() from int to void as neither ever returns an error. Modify call sites of both functions accordingly. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-19bus: imx-weim: use module_platform_driver()Sascha Hauer
Switch from module_platform_driver_probe() to module_platform_driver(). The former is not suitable for booting with device tree as the driver will be registered before the device and thus won't be probed again when the device is present. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-16bus: fsl-mc: remove explicit device_link_delIoana Ciornei
Starting with commit 72175d4ea4c4 ("driver core: Make driver core own stateful device links") stateful device links are owned by the driver core and should not be explicitly removed on device unbind. Delete all device_link_del appearances from the fsl-mc bus. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-By: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-14bus: Add support for Moxtet busMarek Behún
On the Turris Mox router different modules can be connected to the main CPU board: currently a module with a SFP cage, a module with MiniPCIe connector, a PCIe pass-through MiniPCIe connector module, a 4-port switch module, an 8-port switch module, and a 4-port USB3 module. For example: [CPU]-[PCIe-pass-through]-[PCIe]-[8-port switch]-[8-port switch]-[SFP] Each of this modules has an input and output shift register, and these are connected via SPI to the CPU board. Via SPI we are able to discover which modules are connected, in which order, and we can also read some information about the modules (eg. their interrupt status), and configure them. From each module 8 bits can be read (of which low 4 bits identify the module) and 8 bits can be written. For example from the module with a SFP cage we can read the LOS, TX-FAULT and MOD-DEF0 signals, while we can write TX-DISABLE and RATE-SELECT signals. This driver creates a new bus type, called "moxtet". For each Mox module it finds via SPI, it creates a new device on the moxtet bus so that drivers can be written for them. It also implements a virtual interrupt controller for the modules which send their interrupt status over the SPI shift register. These modules do this in addition to sending their interrupt status via the shared interrupt line. When the shared interrupt is triggered, we read from the shift register and handle IRQs for all devices which are in interrupt. The topology of how Mox modules are connected can then be read by listing /sys/bus/moxtet/devices. Link: https://lore.kernel.org/r/20190812161118.21476-2-marek.behun@nic.cz Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-13bus: ti-sysc: remove set but not used variable 'quirks'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/bus/ti-sysc.c: In function sysc_reset: drivers/bus/ti-sysc.c:1452:50: warning: variable quirks set but not used [-Wunused-but-set-variable] It is never used since commit e0db94fe87da ("bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13bus: ti-sysc: allow reset sharing across devicesTero Kristo
Some devices need to share their reset signals, like DSP MMUs, thus drop the exclusive notation from reset request. Also, balance the init time reset count, otherwise the resets will never be applied post boot. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13bus: ti-sysc: rework the reset handlingTero Kristo
If reset controllers are assigned to the ti-sysc target-module, only ti-sysc is going to be able to control these. Thus, remove all the disable_on_idle flag usage, and assert/de-assert the reset always in the idle path. Otherwise the reset signal will always just be de-asserted. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13bus: ti-sysc: re-order the clkdm control around reset handlingTero Kristo
Parenting clockdomain for the IP should be enabled during the reset handling logic, otherwise the reset may not finish properly. Re-order the clockdomain control logic to avoid this. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13bus: ti-sysc: Add missing kerneldoc commentsSuman Anna
A few fields in various structures is missing the corresponding kerneldoc comments. Add them. Also, fixed the comment for sidlemodes. Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13bus: ti-sysc: Switch to SPDX license identifierSuman Anna
Use the appropriate SPDX license identifier in the TI sysc interconnect target driver source files and drop the previous boilerplate license text. Also, add the the SPDX license identifier in the associated ti-sysc header files. Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>