summaryrefslogtreecommitdiff
path: root/drivers/bus
AgeCommit message (Collapse)Author
2020-02-29Merge tag 'omap-for-v5.6/fixes-rc3-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few fixes for omaps for v5.6-rc cycle This series of changes contains few code fixes for issues recently discovered: - A build fix for ARMv6 only configs when CONFIG_HAVE_ARM_SMCCC is not set - A fix for ti-sysc quirk handling for 1-wire hdq reset And a handful of dts fixes that I had queued up and should have already sent earlier instead of waiting for the code fixes to get sorted out: - Fix naming of vsys_3v3 regulator for dra7-evm - Fix incorrect OPP node names for am437x-idk-evm - Fix IPU1 mux clock parent source for dra7 - Add missing PWM property for dra7 timers 13 to 16 - Add missing dma-ranges for dra7 PCIe nodes - Fix mmc3 max-frequency for dra76x * tag 'omap-for-v5.6/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set arm: dts: dra76x: Fix mmc3 max-frequency ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes bus: ti-sysc: Fix 1-wire reset quirk ARM: dts: dra7-l4: mark timer13-16 as pwm capable ARM: dts: dra7xx-clocks: Fixup IPU1 mux clock parent source ARM: dts: am437x-idk-evm: Fix incorrect OPP node names ARM: dts: dra7-evm: Rename evm_3v3 regulator to vsys_3v3 Link: https://lore.kernel.org/r/pull-1582903541-589933@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-26bus: ti-sysc: Fix 1-wire reset quirkTony Lindgren
Because of the i2c quirk we have the reset quirks named in a confusing way. Let's fix the 1-wire quirk accordinlyg. Then let's switch to using better naming later on. Fixes: 4e23be473e30 ("bus: ti-sysc: Add support for module specific reset quirks") Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-02-15bus: moxtet: fix potential stack buffer overflowMarek Behún
The input_read function declares the size of the hex array relative to sizeof(buf), but buf is a pointer argument of the function. The hex array is meant to contain hexadecimal representation of the bin array. Link: https://lore.kernel.org/r/20200215142130.22743-1-marek.behun@nic.cz Fixes: 5bc7f990cd98 ("bus: Add support for Moxtet bus") Signed-off-by: Marek Behún <marek.behun@nic.cz> Reported-by: sohu0106 <sohu0106@126.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-08Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
2020-01-29Merge tag 'char-misc-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc/whatever driver changes for 5.6-rc1 Included in here are loads of things from a variety of different driver subsystems: - soundwire updates - binder updates - nvmem updates - firmware drivers updates - extcon driver updates - various misc driver updates - fpga driver updates - interconnect subsystem and driver updates - bus driver updates - uio driver updates - mei driver updates - w1 driver cleanups - various other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (86 commits) mei: me: add jasper point DID char: hpet: Use flexible-array member binder: fix log spam for existing debugfs file creation. mei: me: add comet point (lake) H device ids nvmem: add QTI SDAM driver dt-bindings: nvmem: add binding for QTI SPMI SDAM dt-bindings: imx-ocotp: Add i.MX8MP compatible dt-bindings: soundwire: fix example soundwire: cadence: fix kernel-doc parameter descriptions soundwire: intel: report slave_ids for each link to SOF driver siox: Use the correct style for SPDX License Identifier w1: omap-hdq: Simplify driver with PM runtime autosuspend firmware: stratix10-svc: Remove unneeded semicolon firmware: google: Probe for a GSMI handler in firmware firmware: google: Unregister driver_info on failure and exit in gsmi firmware: google: Release devices before unregistering the bus slimbus: qcom: add missed clk_disable_unprepare in remove slimbus: Use the correct style for SPDX License Identifier slimbus: qcom-ngd-ctrl: Use dma_request_chan() instead dma_request_slave_channel() dt-bindings: SLIMBus: add slim devices optional properties ...
2020-01-27Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-22Merge 5.5-rc7 into char-misc-nextGreg Kroah-Hartman
We need the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-16Merge tag 'omap-for-v5.6/ti-sysc-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers ti-sysc driver changes for omaps for v5.6 merge window Few changes to implement quirk handling for cases where we need to block clockdomain autoidle, drop old MMU specific quirks, and simplify the return code for sysc_init_resets(). * tag 'omap-for-v5.6/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Use PTR_ERR_OR_ZERO() to simplify code bus: ti-sysc: Drop MMU quirks bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO Link: https://lore.kernel.org/r/pull-1579200367-372444@atomide.com-3 Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'mvebu-drivers-5.6-1' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson
arm/drivers mvebu drivers for 5.6 (part 1) - Various cleanup on the following drivers: - Turris Mox rWTM firmware - Moxtet bus - Armada 37xx rWTM mailbox - Marvell EBU Device Bus * tag 'mvebu-drivers-5.6-1' of git://git.infradead.org/linux-mvebu: mailbox: armada-37xx-rwtm: convert to devm_platform_ioremap_resource memory: mvebu-devbus: convert to devm_platform_ioremap_resource bus: moxtet: declare moxtet_bus_type as static firmware: turris-mox-rwtm: small white space cleanup Link: https://lore.kernel.org/r/877e1x3nxc.fsf@FE-laptop Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'tegra-for-5.6-bus' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers bus: tegra: Changes for v5.6-rc1 Contains a single fix to remove a Kconfig dependency that's no longer required. * tag 'tegra-for-5.6-bus' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: bus: tegra-aconnect: Remove PM_CLK dependency Link: https://lore.kernel.org/r/20200111003553.2411874-2-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-14bus: fsl-mc: properly empty-initialize structureIoana Ciornei
Use the proper form of the empty initializer when working with structures that contain an array. Otherwise, older gcc versions (eg gcc 4.9) will complain about this. Fixes: 1ac210d128ef ("bus: fsl-mc: add the fsl_mc_get_endpoint function") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20191204142950.30206-1-ioana.ciornei@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-10bus: tegra-aconnect: Remove PM_CLK dependencySameer Pujar
The ACONNECT bus driver does not use pm-clk interface anymore and hence the dependency can be removed from its Kconfig option. Fixes: 0d7dab926130 ("bus: tegra-aconnect: use devm_clk_*() helpers") Signed-off-by: Sameer Pujar <spujar@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-08bus: moxtet: declare moxtet_bus_type as staticMarek Behún
This symbol is not meant to be used from elsewhere. Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-16bus: ti-sysc: Fix iterating over clocksTony Lindgren
Commit d878970f6ce1 ("bus: ti-sysc: Add separate functions for handling clocks") separated handling of optional clocks from the main clocks, but introduced an issue where we do not necessarily allocate a slot for both fck and ick clocks, but still assume fixed slots for enumerating over the clocks. Let's fix the issue by ensuring we always have slots for both fck and ick even if we don't use ick, and don't attempt to enumerate optional clocks if not allocated. In the long run we might want to simplify things a bit by only allocating space only for the optional clocks as we have only few devices with optional clocks. Fixes: d878970f6ce1 ("bus: ti-sysc: Add separate functions for handling clocks") Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-12bus: ti-sysc: Use PTR_ERR_OR_ZERO() to simplify codezhengbin
Fixes coccicheck warning: drivers/bus/ti-sysc.c:506:1-3: WARNING: PTR_ERR_OR_ZERO can be used Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-12bus: ti-sysc: Drop MMU quirksSuman Anna
The OMAP IOMMU driver no longer uses the pm_runtime_irq_safe() API after commit 1432ebbd6003 ("iommu/omap: remove pm_runtime_irq_safe flag for OMAP IOMMUs"), so the SYSC_QUIRK_LEGACY_IDLE quirk is no longer needed for MMU devices. Drop the same. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-12bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTOTony Lindgren
For dra7 dcan and dwc3 instances we need to block clockdomain autoidle. Let's do this with CLKDM_NOAUTO quirk flag and enable it for dcan and dwc3. Cc: Keerthy <j-keerthy@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-12bus: ti-sysc: Fix missing reset delay handlingTony Lindgren
We have dts property for "ti,sysc-delay-us", and we're using it, but the wait after OCP softreset only happens if devices are probed in legacy mode. Let's add a delay after writing the OCP softreset when specified. Fixes: e0db94fe87da ("bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits") Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-10bus: ti-sysc: Fix missing force mstandby quirk handlingTony Lindgren
Commit 03856e928b0e ("bus: ti-sysc: Handle mstandby quirk and use it for musb") added quirk handling for mstandby quirk but did not consider that we also need a quirk variant for SYSC_QUIRK_FORCE_MSTANDBY. We need to use forced idle mode for both SYSC_QUIRK_SWSUP_MSTANDBY and SYSC_QUIRK_FORCE_MSTANDBY, but SYSC_QUIRK_SWSUP_MSTANDBY also need to additionally also configure no-idle mode when enabled. Fixes: 03856e928b0e ("bus: ti-sysc: Handle mstandby quirk and use it for musb") Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-06Merge tag 'omap-for-v5.5/ti-sysc-late-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few ti-sysc related fixes for v5.5 merge window Just few minor changes that can be merged when suitable, but would be good to have these in v5.5-rc1 to remove dependencies between branches for more changes later on in v5.6: - Add quirk handling for AESS (Audio Engine Sub System) - We want to drop the useless gptimer option for omap4 as there are local timers - A minor error path handling improvment for sysc_child_add_named_clock() that will make further patching a bit easier * tag 'omap-for-v5.5/ti-sysc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock() ARM: OMAP2+: Drop useless gptimer option for omap4 bus: ti-sysc: Add module enable quirk for audio AESS Link: https://lore.kernel.org/r/pull-1574273726-31367@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Olof Johansson: "Various driver updates for platforms: - A larger set of work on Tegra 2/3 around memory controller and regulator features, some fuse cleanups, etc.. - MMP platform drivers, in particular for USB PHY, and other smaller additions. - Samsung Exynos 5422 driver for DMC (dynamic memory configuration), and ASV (adaptive voltage), allowing the platform to run at more optimal operating points. - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas - Clock/reset control driver for TI/OMAP - Meson-A1 reset controller support - Qualcomm sdm845 and sda845 SoC IDs for socinfo" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits) firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT soc: fsl: add RCPM driver dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition memory: tegra: Consolidate registers definition into common header memory: tegra: Ensure timing control debug features are disabled memory: tegra: Introduce Tegra30 EMC driver memory: tegra: Do not handle error from wait_for_completion_timeout() memory: tegra: Increase handshake timeout on Tegra20 memory: tegra: Print a brief info message about EMC timings memory: tegra: Pre-configure debug register on Tegra20 memory: tegra: Include io.h instead of iopoll.h memory: tegra: Adapt for Tegra20 clock driver changes memory: tegra: Don't set EMC rate to maximum on probe for Tegra20 memory: tegra: Add gr2d and gr3d to DRM IOMMU group memory: tegra: Set DMA mask based on supported address bits soc: at91: Add Atmel SFR SN (Serial Number) support memory: atmel-ebi: switch to SPDX license identifiers memory: atmel-ebi: move NUM_CS definition inside EBI driver soc: mediatek: Refactor bus protection control soc: mediatek: Refactor sram control ...
2019-11-27Merge tag 'staging-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / iio updates from Greg KH: "Here is the big staging and iio set of patches for the 5.5-rc1 release. It's the usual huge collection of cleanup patches all over the drivers/staging/ area, along with a new staging driver, and a bunch of new IIO drivers as well. Full details are in the shortlog, but all of these have been in linux-next for a long time with no reported issues" * tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (548 commits) staging: vchiq: Have vchiq_dump_* functions return an error code staging: vchiq: Refactor indentation in vchiq_dump_* functions staging: fwserial: Fix Kconfig indentation (seven spaces) staging: vchiq_dump: Replace min with min_t staging: vchiq: Fix block comment format in vchiq_dump() staging: octeon: indent with tabs instead of spaces staging: comedi: usbduxfast: usbduxfast_ai_cmdtest rounding error staging: most: core: remove sysfs attr remove_link staging: vc04: Fix Kconfig indentation staging: pi433: Fix Kconfig indentation staging: nvec: Fix Kconfig indentation staging: most: Fix Kconfig indentation staging: fwserial: Fix Kconfig indentation staging: fbtft: Fix Kconfig indentation fbtft: Drop OF dependency fbtft: Make use of device property API fbtft: Drop useless #ifdef CONFIG_OF and dead code fbtft: Describe function parameters in kernel-doc fbtft: Make sure string is NULL terminated staging: rtl8723bs: remove set but not used variable 'change', 'pos' ...
2019-11-14bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock()Markus Elfring
Add a jump target so that a call of the function “clk_put” can be better reused at the end of this function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-11-14bus: ti-sysc: Add module enable quirk for audio AESSTony Lindgren
We must set the autogating bit on enable for AESS (Audio Engine SubSystem) when probed with ti-sysc interconnect target module driver. Otherwise it won't idle properly. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-11-11Merge tag 'hisi-drivers-for-5.5' of git://github.com/hisilicon/linux-hisi ↵Olof Johansson
into arm/drivers ARM64: hisi: SoC driver updates for 5.5 - check the LOGIC_PIO_INDIRECT region ops at registration instead of in the IO port accessors to optimise the lib/ligic_pio.c - add the hisi LPC driver to the build test for the other architectures except ALPHA, C6X, HEXAGON and PARISC as they do not define {read,write}sb by updating the hisi LPC Kconfig and adding a dummy PIO_INDIRECT_SIZE - clean the sparse complains of the hisi LPC driver - build logic_pio into a lib to avoid including in the vmlinux when not referenced * tag 'hisi-drivers-for-5.5' of git://github.com/hisilicon/linux-hisi: logic_pio: Build into a library bus: hisi_lpc: Expand build test coverage bus: hisi_lpc: Clean some types logic_pio: Define PIO_INDIRECT_SIZE for !CONFIG_INDIRECT_PIO lib: logic_pio: Enforce LOGIC_PIO_INDIRECT region ops are set at registration Link: https://lore.kernel.org/r/5DC959B9.80301@hisilicon.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-05bus: hisi_lpc: Expand build test coverageJohn Garry
Currently the driver will only ever be built for ARM64 because it selects CONFIG_INDIRECT_PIO, which itself depends on ARM64. Expand build test coverage for the driver to other architectures by only selecting CONFIG_INDIRECT_PIO for ARM64, when we really want it. We don't include ALPHA, C6X, HEXAGON, and PARISC architectures as they don't define {read, write}sb. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-11-05bus: hisi_lpc: Clean some typesJohn Garry
Sparse complains of these: drivers/bus/hisi_lpc.c:82:38: warning: incorrect type in argument 1 (different address spaces) drivers/bus/hisi_lpc.c:82:38: expected void const volatile [noderef] <asn:2>*addr drivers/bus/hisi_lpc.c:82:38: got unsigned char * drivers/bus/hisi_lpc.c:131:35: warning: incorrect type in argument 1 (different address spaces) drivers/bus/hisi_lpc.c:131:35: expected unsigned char *mbase drivers/bus/hisi_lpc.c:131:35: got void [noderef] <asn:2>*membase drivers/bus/hisi_lpc.c:186:35: warning: incorrect type in argument 1 (different address spaces) drivers/bus/hisi_lpc.c:186:35: expected unsigned char *mbase drivers/bus/hisi_lpc.c:186:35: got void [noderef] <asn:2>*membase drivers/bus/hisi_lpc.c:228:16: warning: cast to restricted __le32 drivers/bus/hisi_lpc.c:251:13: warning: incorrect type in assignment (different base types) drivers/bus/hisi_lpc.c:251:13: expected unsigned int [unsigned] [usertype] val drivers/bus/hisi_lpc.c:251:13: got restricted __le32 [usertype] <noident> Clean them up. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01Merge tag 'iio-for-5.5b' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Second set of IIO + counter new device support, features etc for the 5.5 cycle. Note two merge commits in here, both for immutable branches based of 5.4-rc1. 1. Ti eqep driver because of some file moves in precursor patches. I suspect no one else will pull this one. 2. ab8500 refactor as changes in power supply, hwmon and mfd trees. This may come via numerous trees as well as IIO. Counter subsystem related * ti eqep - New device support with bindings. - Includes prior file move to reflect more general use of ti-pwmss. * Counter core - simplify count_read and count_write callbacks + document change. - fix a typo in docs. Various subsystems related * AB8500 - ab8500_btemp driver converted to be an IIO consumer driver. - ab8500_charger driver converted to be an IIO consumer driver. - ab8500_fg fuel gauge driver converted to be an IIO consumer driver. - ab8500 hwmon driver converted to be an IIO consumer driver. - mfd bindings augmented with the adc channels to make the above work. - drop original mfd driver. New device support * ab8500 - new ADC driver used by the above other subystems via the IIO consumer interface. * adux1020 photometric sensor - new driver and dt bindings. * fxos877cq - new driver for this simple(ish) IMU with DT bindings. * intel_mrfld_adc - new driver for the ADC found on Intel Merrifield platforms. * ltc2983 - new driver for this multi-sensor type temperature interface. Includes complex DT bindings. * max1027 - support for 12 bit devices, max1227, max1229 and max1231 + add to trivial bindings. * st_lsm6dsx - support for the LSM6DS0 6 axis MEMs sensor. Note different from the LSM6DSO which the driver already supports *sigh* - support for the LSM6DSRX 6 axis MEMs sensor. Features and cleanups * ad7303 - replace use of core mlock with a local lock with cleanly defined scope. * ad9834 - add a check for devm_clk_get failing. * at91-sama5d2 - tidy up a 0 as NULL warning. * bmp280 - endian type tidy ups. - use bulk regulator ops for a small reduction in code. - use devm_add_action... to simplify error path handling. * exynos - drop stray semicolon. - use devm_platform_ioremap_resource to reduce boilerplate. * hx711 - various tricks to improve the frequency of read out possible. * max1027 - debugfs support. - make interrupts optional. - reset at probe to get clean state. - refactors to allow addition of new device support. * maxim thermocouple - drop an unneeded semicolon. * mb1232 - yaml binding conversion. * mcp320x - tidy up an endian types in cast warning. * meson_saradc - use devm_platform_ioremap_resource to reduce boilerplate. * mpu3050 - make a poison value explicity big endian to supress a warning. * pulsedlight v2 - endian type tidy ups. * sgp30 - drop an excess semicolon. * sps30 - make truncation explicit with masking to clean up a warning. * st sensors - drop gpio include as none of these support gpios. * st_lsm6dsx - tidy up some alignment issues. - refactors to allow addition of new device support. * allow varients of irq related reg definitions. * avoid accessing active-low, open-drain regs if not provided. * allow varients of bdu/boot and reset regs. * allow for enabling or disabling wakeup sources through platform data (seems someone still uses this). - enable wake-up events for LSM6DS0 - use the drdy mask to avoid some invalid samples during initial start of sensor. - Add support to trim the timestamp. * stm32_adc - kernel-doc fixes. * stm32_dac - power management support. * stmpe-adc - Fix endian type of local variable. * twl4030 - use false / true instead of 0 / 1 for booleans. * xilinx-xadc - use devm_platform_ioremap_resouce to reduce boilerplate. * zpa2326 - reorganise buffer handling setup to be more consistent. Fixes (mostly recent additions) * cpcap-adc - Fix mising IRQF_ONESHOT that would cause warnings to be printed. * st_lsm6dsx - Sanity check the read_fifo pointer is set. - use locked read and update functions to prevent some races. - avoid accessing enable_reg if not provided. - take a lock to prevent a race in updating the config. - kernel-doc fixes. - document wakeup-source property in dt binding. - fix lsm9ds1 gyro gain definitions. * tag 'iio-for-5.5b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (73 commits) dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings iio: imu: st_lsm6dsx: add support to LSM6DSRX iio: st: Drop GPIO include iio: adc: hx711: optimize performance in read cycle iio: adc: stm32-adc: fix kernel-doc warnings iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position iio: chemical: sgp30: drop excess semicolon iio: adc: twl4030: Use false / true instead of 0 / 1 with booleans dt-bindings: iio: Add ltc2983 documentation iio: temperature: Add support for LTC2983 iio: pressure: bmp280: use devm action and remove labels from probe iio: pressure: bmp280: use bulk regulator ops iio: imu: Add support for the FXOS8700 IMU dt-bindings: iio: imu: add fxos8700 imu binding staging: iio: ad9834: add a check for devm_clk_get iio: adc: xilinx-xadc: use devm_platform_ioremap_resource iio: temp: maxim thermocouple: Drop unneeded semi colon. iio: adc: cpcap-adc: Fix missing IRQF_ONESHOT as only threaded handler. iio: adc: meson_saradc: use devm_platform_ioremap_resource iio: adc: exynos: use devm_platform_ioremap_resource ...
2019-10-31bus: fsl-mc: add the fsl_mc_get_endpoint functionIoana Ciornei
Using the newly added fsl_mc_get_endpoint function a fsl-mc driver can find its associated endpoint (another object at the other link of a MC firmware link). The API will be used in the following patch in order to discover the connected DPMAC object of a DPNI. Also, the fsl_mc_device_lookup function is made available to the entire fsl-mc bus driver and not just for the dprc driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31bus: fsl-mc: export device types present on the busIoana Ciornei
Export all device types present on the fsl-mc bus in order to be able to actually use the is_fsl_mc_bus_*() functions from drivers on the bus. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21bus: ti-sysc: Use swsup quirks also for am335x musbTony Lindgren
Also on am335x we need the swsup quirks for musb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-21bus: ti-sysc: Handle mstandby quirk and use it for musbTony Lindgren
We need swsup quirks for sidle and mstandby for musb to work properly. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-18Merge branch 'watchdog-fix' into omap-for-v5.5/ti-syscTony Lindgren
2019-10-18bus: ti-sysc: Fix watchdog quirk handlingTony Lindgren
I noticed that when probed with ti-sysc, watchdog can trigger on am3, am4 and dra7 causing a device reset. Turns out I made several mistakes implementing the watchdog quirk handling: 1. We must do both writes to spr register 2. We must also call the reset quirk on disable 3. On am3 and am4 we need to also set swsup quirk flag I probably only tested this earlier with watchdog service running when the watchdog never gets disabled. Fixes: 4e23be473e30 ("bus: ti-sysc: Add support for module specific reset quirks") Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-17counter: new TI eQEP driverDavid Lechner
This adds a new counter driver for the Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP) module. Only very basic functionality is currently implemented - only enough to be able to read the position. The actual device has many more features which can be added to the driver on an as-needed basis. It is not possible to read the QEPA/B signal values in hardware, so that feature is omitted. The TI_PWMSS kernel option is selected in Kconfig to enable the parent bus, which is needed for power management. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-17bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystemDavid Lechner
The TI PWMSS driver is a simple bus driver for providing power power management for the PWM peripherals on TI AM33xx SoCs, namely eCAP, eHRPWM and eQEP. The eQEP is a counter rather than a PWM, so it does not make sense to have the bus driver in the PWM subsystem since the PWMSS is not exclusive to PWM devices. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-08bus: ti-sysc: avoid toggling power state of module during probeTero Kristo
Current implementation for ti-sysc powers down the module once module init is complete. However, right after power is disabled, it is enabled via runtime PM. This is unnecessary so avoid it by re-ordering the events a bit; move powering down of the module post runtime PM enable which makes sure the use counts are maintained properly and there is no extra power down/up sequence for the module. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-08bus: ti-sysc: drop the extra hardreset during initTero Kristo
There seems to be unnecessary extra hardreset line toggling applied during module init. This is unnecessary, as the reset lines are already asserted during boot, and it can cause certain modules to hang (iommus, remoteprocs.) Remove the extra hardreset toggle, and remove the now redundant function to handle this also. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-08bus: ti-sysc: re-order reset and main clock controlsTero Kristo
The main clocks and reset controls have a hardware level dependency, where one can't transition state without the other one transitioning. Because we don't have the dependency implemented in software, we must ensure the ordering of these two is done properly; they way this is handled is that clocks transition on software level without delay, and the status is only polled on reset side. Because of this, we must re-order the main clock and reset handling on the ti-sysc driver. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-30Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A few fixes that have trickled in through the merge window: - Video fixes for OMAP due to panel-dpi driver removal - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7 - Fixing arch version on ASpeed ast2500 - Two fixes for reset handling on ARM SCMI" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: aspeed: ast2500 is ARMv6K reset: reset-scmi: add missing handle initialisation firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks
2019-09-29Merge tag 'fixes-5.4-merge-window' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omap variants Few fixes for ti-sysc interconnect target module driver for no-idle quirks that caused nfsroot to fail on some dra7 boards. And let's fixes to get LCD working again for logicpd board that got broken a while back with removal of panel-dpi driver. We need to now use generic CONFIG_DRM_PANEL_SIMPLE instead. * tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-09-20Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC late updates from Arnd Bergmann: "This is some material that we picked up into our tree late or that had complex inter-depondencies. The fact that there are these interdependencies tends to meant that these are often actually the most interesting new additions: - The new Aspeed AST2600 baseboard management controller is added, this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and had some dependencies on other device drivers. - After many years, support for the MMP2 based OLPC XO-1.75 finally makes it into the kernel. - The Armada 3720 based Turris Mox open source router platform is a late addition and it follows some preparatory work across multiple branches. - The OMAP2+ platform had some large-scale cleanup involving driver changes and DT changes, here we finish it off, dropping a lot of the now-unused platform data. - The TI K3 platform that got added for 5.3 gains a lot more support for individual bits on the SoC, this part just came late for the merge window" [ This pull request itself wasn't actually sent late at all by Arnd, but I waited on the branches that it used to be pulled first, so it ends up being merged much later than the other ARM SoC pull requests this merge window - Linus ] * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) ARM: dts: dir685: Drop spi-cpol from the display ARM: dts: aspeed: Add AST2600 pinmux nodes ARM: dts: aspeed: Add AST2600 and EVB ARM: exynos: Enable support for ARM architected timers ARM: samsung: Fix system restart on S3C6410 ARM: dts: mmp2: add OLPC XO 1.75 machine ARM: dts: mmp2: rename the USB PHY node ARM: dts: mmp2: specify reg-shift for the UARTs ARM: dts: mmp2: add camera interfaces ARM: dts: mmp2: fix the SPI nodes ARM: dts: mmp2: trivial whitespace fix arm64: dts: marvell: add DTS for Turris Mox dt-bindings: marvell: document Turris Mox compatible arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address arm64: dts: ti: k3-j721e-main: Add hwspinlock node arm64: dts: ti: k3-am65-main: Add hwspinlock node arm64: dts: k3-j721e: Add gpio-keys on common processor board dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E ...
2019-09-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "This contains driver changes that are tightly connected to SoC specific code. Aside from smaller cleanups and bug fixes, here is a list of the notable changes. New device drivers: - The Turris Mox router has a new "moxtet" bus driver for its on-board pluggable extension bus. The same platform also gains a firmware driver. - The Samsung Exynos family gains a new Chipid driver exporting using the soc device sysfs interface - A similar socinfo driver for Qualcomm Snapdragon chips. - A firmware driver for the NXP i.MX DSP IPC protocol using shared memory and a mailbox Other changes: - The i.MX reset controller driver now supports the NXP i.MX8MM chip - Amlogic SoC specific drivers gain support for the S905X3 and A311D chips - A rework of the TI Davinci framebuffer driver to allow important cleanups in the platform code - A couple of device drivers for removed ARM SoC platforms are removed. Most of the removals were picked up by other maintainers, this contains whatever was left" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) bus: uniphier-system-bus: use devm_platform_ioremap_resource() soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access firmware: ti_sci: Allow for device shared and exclusive requests bus: imx-weim: remove incorrect __init annotations fbdev: remove w90x900/nuc900 platform drivers spi: remove w90x900 driver net: remove w90p910-ether driver net: remove ks8695 driver firmware: turris-mox-rwtm: Add sysfs documentation firmware: Add Turris Mox rWTM firmware driver dt-bindings: firmware: Document cznic,turris-mox-rwtm binding bus: moxtet: fix unsigned comparison to less than zero bus: moxtet: remove set but not used variable 'dummy' ARM: scoop: Use the right include dt-bindings: power: add Amlogic Everything-Else power domains bindings soc: amlogic: Add support for Everything-Else power domains controller fbdev: da8xx: use resource management for dma fbdev: da8xx-fb: drop a redundant if fbdev: da8xx-fb: use devm_platform_ioremap_resource() ...
2019-09-06bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()Tony Lindgren
Commit d098913a10f8 ("bus: ti-sysc: Fix clock handling for no-idle quirks") fixed handling for no-idle quirk modules that are not enabled by the bootloader. But it also caused unpaired clockdomain calls that won't allow idling the system. That's because clkdm_allow_idle_nolock() and clkdm_deny_idle_nolock() have usage count with clkdm->forcewake_count. Let's drop the unpaired sysc_clkdm_deny_idle() to fix idling of devices. Fixes: d098913a10f8 ("bus: ti-sysc: Fix clock handling for no-idle quirks") Cc: Keerthy <j-keerthy@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-05bus: ti-sysc: Fix handling of invalid clocksTony Lindgren
We can currently get "Unable to handle kernel paging request at virtual address" for invalid clocks with dts node but no driver: (__clk_get_hw) from [<c0138ebc>] (ti_sysc_find_one_clockdomain+0x18/0x34) (ti_sysc_find_one_clockdomain) from [<c0138f0c>] (ti_sysc_clkdm_init+0x34/0xdc) (ti_sysc_clkdm_init) from [<c0584660>] (sysc_probe+0xa50/0x10e8) (sysc_probe) from [<c065c6ac>] (platform_drv_probe+0x58/0xa8) Let's add IS_ERR checks to ti_sysc_clkdm_init() as And let's start treating clk_get() with -ENOENT as a proper error. If the clock name is specified in device tree we must succeed with clk_get() to continue. For modules with no clock names specified in device tree we will just ignore the clocks. Fixes: 2b2f7def058a ("bus: ti-sysc: Add support for missing clockdomain handling") Acked-by: Roger Quadros <rogerq@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-05bus: uniphier-system-bus: use devm_platform_ioremap_resource()Masahiro Yamada
Replace the chain of platform_get_resource() and devm_ioremap_resource() with devm_platform_ioremap_resource(). This allows to remove the local variable for (struct resource *), and have one function call less. Link: https://lore.kernel.org/r/20190905032122.26076-1-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-05bus: ti-sysc: Fix clock handling for no-idle quirksTony Lindgren
NFSroot can fail on dra7 when cpsw is probed using ti-sysc interconnect target module driver as reported by Keerthy. Device clocks and the interconnect target module may or may not be enabled by the bootloader on init, but we currently assume the clocks and module are on from the bootloader for "ti,no-idle" and "ti,no-idle-on-init" quirks as reported by Grygorii Strashko. Let's fix the issue by always enabling clocks init, and never disable them for "ti,no-idle" quirk. For "ti,no-idle-on-init" quirk, we must decrement the usage count later on to allow PM runtime to idle the module if requested. Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision") Cc: Keerthy <j-keerthy@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Reported-by: Keerthy <j-keerthy@ti.com> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-04bus: imx-weim: remove incorrect __init annotationsArnd Bergmann
The probe function is no longer __init, so anything it calls now must also be available at runtime, as Kbuild points out when building with clang-9: WARNING: vmlinux.o(.text+0x6e7040): Section mismatch in reference from the function weim_probe() to the function .init.text:imx_weim_gpr_setup() The function weim_probe() references the function __init imx_weim_gpr_setup(). This is often because weim_probe lacks a __init annotation or the annotation of imx_weim_gpr_setup is wrong. WARNING: vmlinux.o(.text+0x6e70f0): Section mismatch in reference from the function weim_probe() to the function .init.text:weim_timing_setup() The function weim_probe() references the function __init weim_timing_setup(). This is often because weim_probe lacks a __init annotation or the annotation of weim_timing_setup is wrong. Remove the remaining __init markings that are now wrong. Fixes: 4a92f07816ba ("bus: imx-weim: use module_platform_driver()") Signed-off-by: Arnd Bergmann <arnd@arndb.de>