summaryrefslogtreecommitdiff
path: root/drivers/bus
AgeCommit message (Collapse)Author
2019-05-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: Among the larger pieces: - Power management improvements for TI am335x and am437x (RTC suspend/wake) - Misc new additions for Amlogic (socinfo updates) - ZynqMP FPGA manager - Nvidia improvements for reset/powergate handling - PMIC wrapper for Mediatek MT8516 - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) soc: aspeed: fix Kconfig soc: add aspeed folder and misc drivers spi: zynqmp: Fix build break soc: imx: Add generic i.MX8 SoC driver MAINTAINERS: Update email for Qualcomm SoC maintainer memory: tegra: Fix a typos for "fdcdwr2" mc client Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+" memory: tegra: Replace readl-writel with mc_readl-mc_writel memory: tegra: Fix integer overflow on tick value calculation memory: tegra: Fix missed registers values latching ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30 optee: allow to work without static shared memory soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask fpga manager: Adding FPGA Manager support for Xilinx zynqmp dt-bindings: fpga: Add bindings for ZynqMP fpga driver firmware: xilinx: Add fpga API's ...
2019-04-09bus: ti-sysc: Add generic enable/disable functionsRoger Quadros
For non legacy cases, add generic sysc_enable_module() and sysc_disable_module() functions. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-05bus: ti-sysc: Detect DMIC for debuggingTony Lindgren
Detect DMIC to see what we have connected if config DEBUG is enabled. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-05bus: ti-sysc: Handle swsup idle mode quirksTony Lindgren
In preparation of dropping interconnect target module platform data in favor of devicetree based data, we must pass swsup idle quirks to the platform data functions. For now, let's only tag the UART modules with the SWSUP_SIDLE_ACT quirk. The other modules will get tagged with swsup quirks as we drop the platform data and test the changes. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-03bus: ti-sysc: Add quirk handling for external optional functional clockTony Lindgren
We cannot access mcpdm registers at all unless there is an optional pdmclk configured. As this is currently only needed for mcpdm, let's check for mcpdm in sysc_get_clocks(). If it turns out to be needed for other modules too, we can add more flags to the quirks table for this. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-03bus: ti-sysc: Add support for early quirks based on register addressTony Lindgren
At least mcpdm needs an optional external clock enabled to function and this clock typically comes from the PMIC. We can detect mcpdm based on the interconnect target module address and set a quirk flag early. To do this, let's initialize the clocks a bit later and add a new function for sysc_init_early_quirks(). Note that we cannot yet enable the early quirks for mcpdm until the optional external clocks are handled in the in the following patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-03bus: ti-sysc: Move rstctrl reset to happen laterTony Lindgren
We can do the rsstctrl a bit later, but need to deassert rstctrl reset before the clocks are enabled if asserted. Let's only init restctrl in sysc_init_resets() and do the reset later on just before we enable the device clocks. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-03bus: ti-sysc: Manage clocks for the interconnect target module in all casesTony Lindgren
We are currently not managing interconnect target module clocks in the for legacy platform data based case. This causes a problem for using the platform data based functions when dropping the platform data for the interconnect target module configuration. To avoid a situation where we need to populate the main and optional clocks also for the platform data based functions, let's just manage the clocks directly in ti-sysc driver. This means that until the interconnect target module confugration platform data is dropped our use count for clk_enable() will be 2 instead of 1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-03bus: ti-sysc: Allocate mdata as needed and do platform data based init laterTony Lindgren
The platform data based init functions typically reset the interconnect target module configure the registers. As we may need the interconnect target module specific quirks configured based on the revision register, we want to move the platform data based init to happen later. Let's allocate mdata as needed so it's available for sysc_legacy_init() that we call with module clocks enabled from sysc_init_module(). Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-03bus: ti-sysc: Enable all clocks directly during init to read revisionTony Lindgren
The first thing we want to do is just read the module revision register to be able to configure the module specific quirks and configure the module registers. As the interconnect target module may not yet be properly configured and may need a reset first, we don't want to use pm_runtime_get() at this point. To read the revision register, let's just enable the all the clocks for the interconnect target module during init even if the optional clocks are not needed. That way we can read the revision register to configure the quirks needed for PM runtime. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-01bus: ti-sysc: Add separate functions for handling clocksTony Lindgren
At least McPDM module depends on an external optional clock to be usable. To make handling of the McPDM clock easier in the following patches, let's add separate functions for handling the main clocks and the optional clocks. Let's also add error handling to shut down already enabled clocks while at it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-01bus: ti-sysc: Move legacy platform data idling into separate functionsTony Lindgren
Let's move the legacy idle and enable into separate functions to simplify PM runtime functions a bit. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-01bus: ti-sysc: Make functions staticTony Lindgren
We can make sysc_write() and sysc_child_pm_domain static as noted by sparse. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-01bus: ti-sysc: Handle missed no-idle property in addition to no-idle-on-initTony Lindgren
We have ti,no-idle in use in addition to ti,no-idle-on-init but we're missing handling for it in the ti-sysc interconnect target module driver. Let's also group the idle defines together and update the binding documentation for it. Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-01bus: ti-sysc: Fix sysc_unprepare() when no clocks have been allocatedTony Lindgren
If we return early before ddata->clocks have been allocated we will get a NULL pointer dereference in sysc_unprepare(). Let's fix this by returning early when no clocks are allocated. Fixes: 0eecc636e5a2 ("bus: ti-sysc: Add minimal TI sysc interconnect target driver") Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-03-28bus: tegra-aconnect: add system sleep callbacksSameer Pujar
pm_runtime_force_suspend() and pm_runtime_force_resume() are used as system sleep noirq suspend and resume callbacks. If the driver is active till late suspend, where runtime PM cannot run, force suspend is essential for the device. This makes sure that the device is put into low power state during system wide PM transitions to sleep states. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-03-28bus: tegra-aconnect: use devm_clk_*() helpersSameer Pujar
aconnect bus driver is using pm_clk_*() interface for managing clocks. With this, clocks seem to be always ON. This happens on Tegra devices which use BPMP co-processor to manage clock resources, where clocks are enabled during prepare phase. This is necessary because calls to BPMP are always blocking. When pm_clk_*() interface is used on such Tegra devices, clock prepare count is not balanced till driver remove() gets executed and hence clocks are seen ON always. Thus this patch replaces pm_clk_*() with devm_clk_*() framework. Suggested-by: Mohan Kumar D <mkumard@nvidia.com> Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Sameer Pujar <spujar@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-03-06Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, the drivers/tee and drivers/reset subsystems get merged here, with the expected set of smaller updates and some new hardware support. The tee subsystem now supports device drivers to be attached to a tee, the first example here is a random number driver with its implementation in the secure world. Three new power domain drivers get added for specific chip families: - Broadcom BCM283x chips (used in Raspberry Pi) - Qualcomm Snapdragon phone chips - Xilinx ZynqMP FPGA SoCs One new driver is added to talk to the BPMP firmware on NVIDIA Tegra210 Existing drivers are extended for new SoC variants from NXP, NVIDIA, Amlogic and Qualcomm" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits) tee: optee: update optee_msg.h and optee_smc.h to dual license tee: add cancellation support to client interface dpaa2-eth: configure the cache stashing amount on a queue soc: fsl: dpio: configure cache stashing destination soc: fsl: dpio: enable frame data cache stashing per software portal soc: fsl: guts: make fsl_guts_get_svr() static hwrng: make symbol 'optee_rng_id_table' static tee: optee: Fix unsigned comparison with less than zero hwrng: Fix unsigned comparison with less than zero tee: fix possible error pointer ctx dereferencing hwrng: optee: Initialize some structs using memset instead of braces tee: optee: Initialize some structs using memset instead of braces soc: fsl: dpio: fix memory leak of a struct qbman on error exit path clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static soc: qcom: llcc-slice: Fix typos qcom: soc: llcc-slice: Consolidate some code qcom: soc: llcc-slice: Clear the global drv_data pointer on error drivers: soc: xilinx: Add ZynqMP power domain driver firmware: xilinx: Add APIs to control node status/power dt-bindings: power: Add ZynqMP power domain bindings ...
2019-03-05Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Add helper for simple skcipher modes. - Add helper to register multiple templates. - Set CRYPTO_TFM_NEED_KEY when setkey fails. - Require neither or both of export/import in shash. - AEAD decryption test vectors are now generated from encryption ones. - New option CONFIG_CRYPTO_MANAGER_EXTRA_TESTS that includes random fuzzing. Algorithms: - Conversions to skcipher and helper for many templates. - Add more test vectors for nhpoly1305 and adiantum. Drivers: - Add crypto4xx prng support. - Add xcbc/cmac/ecb support in caam. - Add AES support for Exynos5433 in s5p. - Remove sha384/sha512 from artpec7 as hardware cannot do partial hash" [ There is a merge of the Freescale SoC tree in order to pull in changes required by patches to the caam/qi2 driver. ] * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (174 commits) crypto: s5p - add AES support for Exynos5433 dt-bindings: crypto: document Exynos5433 SlimSSS crypto: crypto4xx - add missing of_node_put after of_device_is_available crypto: cavium/zip - fix collision with generic cra_driver_name crypto: af_alg - use struct_size() in sock_kfree_s() crypto: caam - remove redundant likely/unlikely annotation crypto: s5p - update iv after AES-CBC op end crypto: x86/poly1305 - Clear key material from stack in SSE2 variant crypto: caam - generate hash keys in-place crypto: caam - fix DMA mapping xcbc key twice crypto: caam - fix hash context DMA unmap size hwrng: bcm2835 - fix probe as platform device crypto: s5p-sss - Use AES_BLOCK_SIZE define instead of number crypto: stm32 - drop pointless static qualifier in stm32_hash_remove() crypto: chelsio - Fixed Traffic Stall crypto: marvell - Remove set but not used variable 'ivsize' crypto: ccp - Update driver messages to remove some confusion crypto: adiantum - add 1536 and 4096-byte test vectors crypto: nhpoly1305 - add a test vector with len % 16 != 0 crypto: arm/aes-ce - update IV after partial final CTR block ...
2019-02-15Merge tag 'hisi-drivers-for-5.1' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann
into arm/drivers ARM64: hisi: SoC driver updates for 5.1 - Add compatibility support for different FWs in the hisi LPC bus driver * tag 'hisi-drivers-for-5.1' of git://github.com/hisilicon/linux-hisi: bus: hisi_lpc: Don't fail probe for unrecognised child devices Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'imx-drivers-5.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX drivers update for 5.1: - Do not get GPCv2 driver depend on SOC_IMX8MQ since the driver is going to be used on more SoCs than just i.MX8MQ. - Add power domain information into SCU bindings document. - Add support of start/stop a CPU into imx firmware driver. - Support multiple address ranges per child node for imx-weim bus driver. * tag 'imx-drivers-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: firmware: imx: Add support to start/stop a CPU soc: imx: Break dependency on SOC_IMX8MQ for GPCv2 firmware: imx: scu-pd: add fallback compatible string support dt-bindings: fsl: scu: add imx8qm scu power domain support dt-bindings: fsl: scu: add fallback compatible string for power domain bus: imx-weim: guard against timing configuration conflicts bus: imx-weim: support multiple address ranges per child node dt-bindings: bus: imx-weim: document multiple address ranges per child node soc: imx: gpcv2: handle reset clocks soc: imx: gpcv2: handle additional power-down bits in handshake register Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-08bus: hisi_lpc: Don't fail probe for unrecognised child devicesJohn Garry
Currently for ACPI-based FW we fail the probe for an unrecognised child HID. However, there is FW in the field with LPC child devices having fake HIDs, namely "IPI0002", which was an IPMI device invented to support the initial out-of-tree LPC host driver, different from the final mainline version. To provide compatibility support for these dodgy FWs, just discard the unrecognised HIDs instead of failing the probe altogether. Tested-by: Zengruan Ye <yezengruan@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-01-29Merge branch 'pwm-dmtimer-fixes' into omap-for-v5.0/fixes-v2Tony Lindgren
2019-01-29bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()Tony Lindgren
Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") started producing a warning for pwm-omap-dmtimer: WARNING: CPU: 0 PID: 77 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x2f8/0x388 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2 (Idle): Data Access in Supervisor mode during Functional access ... __pm_runtime_idle omap_dm_timer_disable pwm_omap_dmtimer_start pwm_omap_dmtimer_enable pwm_apply_state pwm_vibrator_start pwm_vibrator_play_work This is because the timer that pwm-omap-dmtimer is using is now being probed with ti-sysc interconnect target module instead of omap_device and the ti-sysc quirk for SYSC_QUIRK_LEGACY_IDLE is not fully compatible with what omap_device has been doing. We could fix this by reverting the timer changes and have the timer probe again with omap_device. Or we could add more quirk handling to ti-sysc driver. But as these options don't work nicely as longer term solutions, let's just make timers probe with ti-sysc without any quirks. To do this, all we need to do is remove quirks for timers for ti-sysc, and drop the bogus pm_runtime_irq_safe() flag for timer-ti-dm. We should not use pm_runtime_irq_safe() anyways for drivers as it will take a permanent use count on the parent device blocking the parent devices from idling and has been forcing ti-sysc driver to use a quirk flag. Note that we will move the timer data to DEBUG section later on in clean-up patches. Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-By: Andreas Kemnade <andreas@kemnade.info> Tested-By: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-01-11bus: fsl-mc: automatically add a device_link on fsl_mc_[portal,object]_allocateIoana Ciornei
Allocatable devices can be acquired by drivers on the fsl-mc bus using the fsl_mc_portal_allocate or fsl_mc_object_allocate functions. Add a device link between the consumer device and the supplier device so that proper resource management is achieved. Also, adding a link between these devices ensures that a proper unbind order is respected (ie before the supplier device is unbound from its respective driver all consumer devices will be notified and unbound first). Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-01-11bus: imx-weim: guard against timing configuration conflictsSven Van Asbroeck
When specifying weim child devices, there is a risk that more than one timing setting is specified for the same chip select. The driver cannot support such a configuration. In case of conflict, this patch will print a warning to the log, and will ignore the child node in question. In this example, node acme@1 will be ignored, as it tries to modify timing settings for CS0: &weim { acme@0 { compatible = "acme,whatever"; reg = <0 0 0x100>; fsl,weim-cs-timing = <something>; }; acme@1 { compatible = "acme,whatnot"; reg = <0 0x500 0x100>; fsl,weim-cs-timing = <something else>; }; }; However in this example, the driver will be happy: &weim { acme@0 { compatible = "acme,whatever"; reg = <0 0 0x100>; fsl,weim-cs-timing = <something>; }; acme@1 { compatible = "acme,whatnot"; reg = <0 0x500 0x100>; fsl,weim-cs-timing = <something>; }; }; Signed-off-by: Sven Van Asbroeck <TheSven73@googlemail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-11bus: imx-weim: support multiple address ranges per child nodeSven Van Asbroeck
Ensure that timing values for the child node are applied to all chip selects in the child's address ranges. Note that this does not support multiple timing settings per child; this can be added in the future if required. Example: &weim { acme@0 { compatible = "acme,whatever"; reg = <0 0 0x100>, <0 0x400000 0x800>, <1 0x400000 0x800>; fsl,weim-cs-timing = <0x024400b1 0x00001010 0x20081100 0x00000000 0xa0000240 0x00000000>; }; }; Signed-off-by: Sven Van Asbroeck <TheSven73@googlemail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-31Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Misc driver updates for platforms, many of them power related. - Rockchip adds power domain support for rk3066 and rk3188 - Amlogic adds a power measurement driver - Allwinner adds SRAM support for three platforms (F1C100, H5, A64 C1) - Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7 - Broadcom fixes suspend/resume with Thumb2 kernels, and improves stability of a handful of firmware/platform interfaces - PXA completes their conversion to dmaengine framework - Renesas does a bunch of PM cleanups across many platforms - Tegra adds support for suspend/resume on T186/T194, which includes some driver cleanups and addition of wake events - Tegra also adds a driver for memory controller (EMC) on Tegra2 - i.MX tweaks power domain bindings, and adds support for i.MX8MQ in GPC - Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60 and misc cleanups across several platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: at91: add support in soc driver for new SAM9X60 ARM: at91: add support in soc driver for LPDDR2 SiP memory: omap-gpmc: Use of_node_name_eq for node name comparisons bus: ti-sysc: Check for no-reset and no-idle flags at the child level ARM: OMAP2+: Check also the first dts child for hwmod flags soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency soc: imx: gpc: Increase GPC_CLK_MAX to 7 soc: renesas: rcar-sysc: Fix power domain control after system resume soc: renesas: rcar-sysc: Merge PM Domain registration and linking soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B} dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1 dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1 dt-bindings: sram: Add Allwinner suniv F1C100s soc: sunxi: sram: Add support for the H5 SoC system control soc: sunxi: sram: Enable EMAC clock access for H3 variant soc: imx: gpcv2: add support for i.MX8MQ SoC soc: imx: gpcv2: move register access table to domain data soc: imx: gpcv2: prefix i.MX7 specific defines dmaengine: pxa: make the filter function internal ...
2018-12-19bus: qcom: remove duplicated include from qcom-ebi2.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-12Merge tag 'omap-for-v4.21/driver-part2-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers Few more omap driver fixes and improvments for v4.21 merge window This series of changes improves the TI module flag handling to allow booting with older dts files until the module flags have been moved to the interconnect target module level. And there's a of_node_name_eq() clean-up patch from Rob Herring for the GPMC driver. * tag 'omap-for-v4.21/driver-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: memory: omap-gpmc: Use of_node_name_eq for node name comparisons bus: ti-sysc: Check for no-reset and no-idle flags at the child level ARM: OMAP2+: Check also the first dts child for hwmod flags Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-10bus: ti-sysc: Check for no-reset and no-idle flags at the child levelTony Lindgren
With ti-sysc, we need to now have the device tree properties for ti,no-reset-on-init and ti,no-idle-on-init at the module level instead of the child device level. Let's check for these properties at the child device level to enable quirks, and warn about moving the properties to the module level. Otherwise am335x-evm based boards tagging gpio1 with ti,no-reset-on-init will have their DDR power disabled if wired up in such a tricky way. Note that this should not be an issue for earlier kernels as we don't rely on this until the dts files have been updated to probe with ti-sysc interconnect target driver. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-12-06bus: fsl-mc: remove duplicated include filesYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03Merge tag 'arm-soc/for-4.21/drivers' of https://github.com/Broadcom/stblinux ↵Olof Johansson
into next/drivers This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes for 4.21, please pull the following changes: - James fixes the firmware interface after a commit changed the use of VLA and broke large transfers - Stefan adds a timeout check for Raspberry Pi firmware transactions and updates a bunch of SoC/firmware files to use SPDX tags - Wolfram switches the GISB bus arbiter to use dev_get_drvdata() - Yangtao provides a fix for a reference leak due to a call to of_find_node_by_path() - Florian fixes the CPU re-entry point out of S3 suspend with kernels built in Thumb2 mode * tag 'arm-soc/for-4.21/drivers' of https://github.com/Broadcom/stblinux: soc: bcm: brcmstb: Don't leak device tree node reference firmware: raspberrypi: Switch to SPDX identifier firmware: raspberrypi: Fix firmware calls with large buffers soc: bcm: Switch raspberrypi-power to SPDX identifier firmware: raspberrypi: Define timeout for transactions bus: brcmstb_gisb: simplify getting .driver_data soc: bcm: brcmstb: Fix re-entry point with a THUMB2_KERNEL Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-15bus: ti-sysc: Detect devices for debug on omap5Tony Lindgren
We want to see the names of detected devices when DEBUG is enabled. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-11-15bus: ti-sysc: Add mcasp optional clocks flagTony Lindgren
We have OPT_CLKS_NEEDED in legacy platform data, but it's missing from the ti-sysc driver for device tree based configuration. In order to pass OPT_CLKS_NEEDED quirk flag we need to update omap4 module data and add a new compatible for dra7 as the module layout is different from sysc_regbits_omap4_mcasp. Fixes: 70a65240efb1 ("bus: ti-sysc: Add register bits for interconnect target modules") Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-11-15bus: ti-sysc: Fix getting optional clocks in clock_rolesTony Lindgren
We can have holes in clock_roles with interface clock missing for example. Currently getting an optional clock will fail if there are only a functional clock and an optional clock. Fixes: 09dfe5810762 ("bus: ti-sysc: Add handling for clkctrl opt clocks") Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-11-05bus: brcmstb_gisb: simplify getting .driver_dataWolfram Sang
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-10-29Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "The most noteworthy SoC driver changes this time include: - The TEE subsystem gains an in-kernel interface to access the TEE from device drivers. - The reset controller subsystem gains a driver for the Qualcomm Snapdragon 845 Power Domain Controller. - The Xilinx Zynq platform now has a firmware interface for its platform management unit. This contains a firmware "ioctl" interface that was a little controversial at first, but the version we merged solved that by not exposing arbitrary firmware calls to user space. - The Amlogic Meson platform gains a "canvas" driver that is used for video processing and shared between different high-level drivers. The rest is more of the usual, mostly related to SoC specific power management support and core drivers in drivers/soc: - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new features related to power and reset control. - The Mediatek mt8183 and mt6765 SoC platforms gain support for their respective power management chips. - A new driver for NXP i.MX8, which need a firmware interface for power management. - The SCPI firmware interface now contains support estimating power usage of performance states - The NVIDIA Tegra "pmc" driver gains a few new features, in particular a pinctrl interface for configuring the pads. - Lots of small changes for Qualcomm, in particular the "smem" device driver. - Some cleanups for the TI OMAP series related to their sysc controller. Additional cleanups and bugfixes in SoC specific drivers include the Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits) firmware: tegra: bpmp: Implement suspend/resume support drivers: clk: Add ZynqMP clock driver dt-bindings: clock: Add bindings for ZynqMP clock driver firmware: xilinx: Add zynqmp IOCTL API for device control Documentation: xilinx: Add documentation for eemi APIs MAINTAINERS: imx: include drivers/firmware/imx path firmware: imx: add misc svc support firmware: imx: add SCU firmware driver support reset: Fix potential use-after-free in __of_reset_control_get() dt-bindings: arm: fsl: add scu binding doc soc: fsl: qbman: add interrupt coalesce changing APIs soc: fsl: bman_portals: defer probe after bman's probe soc: fsl: qbman: Use last response to determine valid bit soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers soc: fsl: qbman: Check if CPU is offline when initializing portals reset: qcom: PDC Global (Power Domain Controller) reset controller dt-bindings: reset: Add PDC Global binding for SDM845 SoCs reset: Grammar s/more then once/more than once/ bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS ...
2018-10-26Merge tag 'devicetree-for-4.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: "A bit bigger than normal as I've been busy this cycle. There's a few things with dependencies and a few things subsystem maintainers didn't pick up, so I'm taking them thru my tree. The fixes from Johan didn't get into linux-next, but they've been waiting for some time now and they are what's left of what subsystem maintainers didn't pick up. Summary: - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4 - Work to get rid of direct accesses to struct device_node name and type pointers in preparation for removing them. New helpers for parsing DT cpu nodes and conversions to use the helpers. printk conversions to %pOFn for printing DT node names. Most went thru subystem trees, so this is the remainder. - Fixes to DT child node lookups to actually be restricted to child nodes instead of treewide. - Refactoring of dtb targets out of arch code. This makes the support more uniform and enables building all dtbs on c6x, microblaze, and powerpc. - Various DT binding updates for Renesas r8a7744 SoC - Vendor prefixes for Facebook, OLPC - Restructuring of some ARM binding docs moving some peripheral bindings out of board/SoC binding files - New "secure-chosen" binding for secure world settings on ARM - Dual licensing of 2 DT IRQ binding headers" * tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits) ARM: dt: relicense two DT binding IRQ headers power: supply: twl4030-charger: fix OF sibling-node lookup NFC: nfcmrvl_uart: fix OF child-node lookup net: stmmac: dwmac-sun8i: fix OF child-node lookup net: bcmgenet: fix OF child-node lookup drm/msm: fix OF child-node lookup drm/mediatek: fix OF sibling-node lookup of: Add missing exports of node name compare functions dt-bindings: Add OLPC vendor prefix dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus dt-bindings: thermal: samsung: Add SPDX license identifier dt-bindings: clock: samsung: Add SPDX license identifiers dt-bindings: timer: ostm: Add R7S9210 support dt-bindings: phy: rcar-gen2: Add r8a7744 support dt-bindings: can: rcar_can: Add r8a7744 support dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support dt-bindings: watchdog: renesas-wdt: Document r8a7744 support dt-bindings: thermal: rcar: Add device tree support for r8a7744 Documentation: dt: Add binding for /secure-chosen/stdout-path dt-bindings: arm: zte: Move sysctrl bindings to their own doc ...
2018-10-26Merge tag 'iommu-updates-v4.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - Debugfs support for the Intel VT-d driver. When enabled, it now also exposes some of its internal data structures to user-space for debugging purposes. - ARM-SMMU driver now uses the generic deferred flushing and fast-path iova allocation code. This is expected to be a major performance improvement, as this allocation path scales a lot better. - Support for r8a7744 in the Renesas iommu driver - Couple of minor fixes and improvements all over the place * tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits) iommu/arm-smmu-v3: Remove unnecessary wrapper function iommu/arm-smmu-v3: Add SPDX header iommu/amd: Add default branch in amd_iommu_capable() dt-bindings: iommu: ipmmu-vmsa: Add r8a7744 support iommu/amd: Move iommu_init_pci() to .init section iommu/arm-smmu: Support non-strict mode iommu/io-pgtable-arm-v7s: Add support for non-strict mode iommu/arm-smmu-v3: Add support for non-strict mode iommu/io-pgtable-arm: Add support for non-strict mode iommu: Add "iommu.strict" command line option iommu/dma: Add support for non-strict mode iommu/arm-smmu: Ensure that page-table updates are visible before TLBI iommu/arm-smmu-v3: Implement flush_iotlb_all hook iommu/arm-smmu-v3: Avoid back-to-back CMD_SYNC operations iommu/arm-smmu-v3: Fix unexpected CMD_SYNC timeout iommu/io-pgtable-arm: Fix race handling in split_blk_unmap() iommu/arm-smmu-v3: Fix a couple of minor comment typos iommu: Fix a typo iommu: Remove .domain_{get,set}_windows iommu: Tidy up window attributes ...
2018-10-25Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Remove VLA usage - Add cryptostat user-space interface - Add notifier for new crypto algorithms Algorithms: - Add OFB mode - Remove speck Drivers: - Remove x86/sha*-mb as they are buggy - Remove pcbc(aes) from x86/aesni - Improve performance of arm/ghash-ce by up to 85% - Implement CTS-CBC in arm64/aes-blk, faster by up to 50% - Remove PMULL based arm64/crc32 driver - Use PMULL in arm64/crct10dif - Add aes-ctr support in s5p-sss - Add caam/qi2 driver Others: - Pick better transform if one becomes available in crc-t10dif" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits) crypto: chelsio - Update ntx queue received from cxgb4 crypto: ccree - avoid implicit enum conversion crypto: caam - add SPDX license identifier to all files crypto: caam/qi - simplify CGR allocation, freeing crypto: mxs-dcp - make symbols 'sha1_null_hash' and 'sha256_null_hash' static crypto: arm64/aes-blk - ensure XTS mask is always loaded crypto: testmgr - fix sizeof() on COMP_BUF_SIZE crypto: chtls - remove set but not used variable 'csk' crypto: axis - fix platform_no_drv_owner.cocci warnings crypto: x86/aes-ni - fix build error following fpu template removal crypto: arm64/aes - fix handling sub-block CTS-CBC inputs crypto: caam/qi2 - avoid double export crypto: mxs-dcp - Fix AES issues crypto: mxs-dcp - Fix SHA null hashes and output length crypto: mxs-dcp - Implement sha import/export crypto: aegis/generic - fix for big endian systems crypto: morus/generic - fix for big endian systems crypto: lrw - fix rebase error after out of bounds fix crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X. crypto: cavium/nitrox - NITROX command queue changes. ...
2018-10-23Merge tag 'gpio-v4.20-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.20 series: Core changes: - A patch series from Hans Verkuil to make it possible to enable/disable IRQs on a GPIO line at runtime and drive GPIO lines as output without having to put/get them from scratch. The irqchip callbacks have been improved so that they can use only the fastpatch callbacks to enable/disable irqs like any normal irqchip, especially the gpiod_lock_as_irq() has been improved to be callable in fastpath context. A bunch of rework had to be done to achieve this but it is a big win since I never liked to restrict this to slowpath. The only call requireing slowpath was try_module_get() and this is kept at the .request_resources() slowpath callback. In the GPIO CEC driver this is a big win sine a single line is used for both outgoing and incoming traffic, and this needs to use IRQs for incoming traffic while actively driving the line for outgoing traffic. - Janusz Krzysztofik improved the GPIO array API to pass a "cookie" (struct gpio_array) and a bitmap for setting or getting multiple GPIO lines at once. This improvement orginated in a specific need to speed up an OMAP1 driver and has led to a much better API and real performance gains when the state of the array can be used to bypass a lot of checks and code when we want things to go really fast. The previous code would minimize the number of calls down to the driver callbacks assuming the CPU speed was orders of magnitude faster than the I/O latency, but this assumption was wrong on several platforms: what we needed to do was to profile and improve the speed on the hot path of the array functions and this change is now completed. - Clean out the painful and hard to grasp BNF experiments from the device tree bindings. Future approaches are looking into using JSON schema for this purpose. (Rob Herring is floating a patch series.) New drivers: - The RCAR driver now supports r8a774a1 (RZ/G2M). - Synopsys GPIO via CREGs driver. Major improvements: - Modernization of the EP93xx driver to use irqdomain and other contemporary concepts. - The ingenic driver has been merged into the Ingenic pin control driver and removed from the GPIO subsystem. - Debounce support in the ftgpio010 driver" * tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (116 commits) gpio: Clarify kerneldoc on gpiochip_set_chained_irqchip() gpio: Remove unused 'irqchip' argument to gpiochip_set_cascaded_irqchip() gpio: Drop parent irq assignment during cascade setup mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap gpio: fix SNPS_CREG kconfig dependency warning gpiolib: Initialize gdev field before is used gpio: fix kernel-doc after devres.c file rename gpio: fix doc string for devm_gpiochip_add_data() to not talk about irq_chip gpio: syscon: Fix possible NULL ptr usage gpiolib: Show correct direction from the beginning pinctrl: msm: Use init_valid_mask exported function gpiolib: Add init_valid_mask exported function GPIO: add single-register GPIO via CREG driver dt-bindings: Document the Synopsys GPIO via CREG bindings gpio: mockup: use device properties instead of platform_data gpio: Slightly more helpful debugfs gpio: omap: Remove set but not used variable 'dev' gpio: omap: drop omap_gpio_list Accept partial 'gpio-line-names' property. gpio: omap: get rid of the conditional PM runtime calls ...
2018-10-04Merge tag 'omap-for-v4.20/ti-sysc-take2-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers TI sysc driver changes for v4.20 merge window This series gets rid of the SYSC_QUIRK_RESOURCE_PROVIDER to make device detection happen mostly only if #define DEBUG is set. Few core devices still need to be detected to set legacy quirks. We also add support for booting am335x, am437x and dra7 SoCs with L4 devices defined in device tree instead of legacy platform data. And finally we simplify suspend with just SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and dropping the custom functions that were attempting to work around issues that really turned out to be child device driver related issues. Apologies for a late pull request, debugging the suspend issues took a while and I did not want to send these changes until that got sorted out. * tag 'omap-for-v4.20/ti-sysc-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS bus: ti-sysc: Make some warnings debug only bus: ti-sysc: Detect devices for debug on dra7 bus: ti-sysc: Detect timer and gpio on dra7 bus: ti-sysc: Detect devices on am335x when DEBUG is enabled bus: ti-sysc: Detect more devices on am473x for debugging bus: ti-sysc: Update revision masks to support am437x bus: ti-sysc: Defer suspend as needed Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-01bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPSTony Lindgren
As Grygorii Strashko pointed out, the runtime PM use count of the children can be whatever at suspend and we should not use it. So let's just suspend ti-sysc at noirq level and get rid of some code. Let's also remove the PM_SLEEP ifdef and use __maybe_unused as the PM code already deals with the ifdefs. Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-10-01bus: imx-weim: drop unnecessary DT node name NULL checkRob Herring
Checking the child node names is pointless as the DT node name can never be NULL, so remove it. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-28bus: ti-sysc: Make some warnings debug onlyTony Lindgren
We're currently warning about busy children on suspend in sysc_child_suspend_noirq() but the legacy code omap_device does not do that. Let's just make it dev_dbg() instead of dev_warn(). Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28bus: ti-sysc: Detect devices for debug on dra7Tony Lindgren
We want to see the names of detected devices when DEBUG is enabled. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28bus: ti-sysc: Detect timer and gpio on dra7Tony Lindgren
We need to detect timer and gpio on dra7 because of the SYSC_QUIRK_LEGACY_IDLE flag for suspend and resume. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28Merge commit '4f3530f4a41d49c41015020cd9a5ed5c95b5d2db' into ↵Tony Lindgren
omap-for-v4.20/ti-sysc
2018-09-28bus: mvebu-mbus: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org>