summaryrefslogtreecommitdiff
path: root/drivers/cdrom
AgeCommit message (Collapse)Author
2021-07-30scsi: sr: cdrom: Move cdrom_read_cdda_bpc() into the sr driverChristoph Hellwig
cdrom_read_cdda_bpc() relies on sending SCSI command to the low level driver using a REQ_OP_SCSI_IN request. This isn't generic block layer functionality, so move the actual low-level code into the sr driver and call it through a new read_cdda_bpc method in the cdrom_device_ops structure. With this the CDROM code does not have to pull in scsi_normalize_sense() and depend on CONFIG_SCSI_COMMON. Link: https://lore.kernel.org/r/20210730072752.GB23847%40lst.de Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-28scsi: cdrom: Remove the call to scsi_cmd_blk_ioctl() from cdrom_ioctl()Christoph Hellwig
Only the sr driver can handle SCSI passthrough requests, so move the call to scsi_cmd_blk_ioctl() there. Link: https://lore.kernel.org/r/20210724072033.1284840-9-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-30block: remove REQ_OP_SCSI_{IN,OUT}Christoph Hellwig
With the legacy IDE driver gone drivers now use either REQ_OP_DRV_* or REQ_OP_SCSI_*, so unify the two concepts of passthrough requests into a single one. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-11gdrom: use blk_mq_alloc_diskChristoph Hellwig
Use the blk_mq_alloc_disk API to simplify the gendisk and request_queue allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Link: https://lore.kernel.org/r/20210602065345.355274-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-13cdrom: gdrom: initialize global variable at init timeGreg Kroah-Hartman
As Peter points out, if we were to disconnect and then reconnect this driver from a device, the "global" state of the device would contain odd values and could cause problems. Fix this up by just initializing the whole thing to 0 at probe() time. Ideally this would be a per-device variable, but given the age and the total lack of users of it, that would require a lot of s/./->/g changes for really no good reason. Reported-by: Peter Rosin <peda@axentia.se> Cc: Jens Axboe <axboe@kernel.dk> Reviewed-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/YJP2j6AU82MqEY2M@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13cdrom: gdrom: deallocate struct gdrom_unit fields in remove_gdromAtul Gopinathan
The fields, "toc" and "cd_info", of "struct gdrom_unit gd" are allocated in "probe_gdrom()". Prevent a memory leak by making sure "gd.cd_info" is deallocated in the "remove_gdrom()" function. Also prevent double free of the field "gd.toc" by moving it from the module's exit function to "remove_gdrom()". This is because, in "probe_gdrom()", the function makes sure to deallocate "gd.toc" in case of any errors, so the exit function invoked later would again free "gd.toc". The patch also maintains consistency by deallocating the above mentioned fields in "remove_gdrom()" along with another memory allocated field "gd.disk". Suggested-by: Jens Axboe <axboe@kernel.dk> Cc: Peter Rosin <peda@axentia.se> Cc: stable <stable@vger.kernel.org> Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com> Link: https://lore.kernel.org/r/20210503115736.2104747-28-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13Revert "gdrom: fix a memory leak bug"Greg Kroah-Hartman
This reverts commit 093c48213ee37c3c3ff1cf5ac1aa2a9d8bc66017. Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not. Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change. Because of this, all submissions from this group must be reverted from the kernel tree and will need to be re-reviewed again to determine if they actually are a valid fix. Until that work is complete, remove this change to ensure that no problems are being introduced into the codebase. Cc: Wenwen Wang <wang6495@umn.edu> Cc: Peter Rosin <peda@axentia.se> Cc: Jens Axboe <axboe@kernel.dk> Fixes: 093c48213ee3 ("gdrom: fix a memory leak bug") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-27-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-11gdrom: fix compilation errorChaitanya Kulkarni
Use the right name for the struct request variable that removes the following compilation error :- make --silent --keep-going --jobs=8 O=/home/tuxbuild/.cache/tuxmake/builds/1/tmp ARCH=sh CROSS_COMPILE=sh4-linux-gnu- 'CC=sccache sh4-linux-gnu-gcc' 'HOSTCC=sccache gcc' In file included from /builds/linux/include/linux/scatterlist.h:9, from /builds/linux/include/linux/dma-mapping.h:10, from /builds/linux/drivers/cdrom/gdrom.c:16: /builds/linux/drivers/cdrom/gdrom.c: In function 'gdrom_readdisk_dma': /builds/linux/drivers/cdrom/gdrom.c:586:61: error: 'rq' undeclared (first use in this function) 586 | __raw_writel(page_to_phys(bio_page(req->bio)) + bio_offset(rq->bio), | ^~ Fixes: 1d2c82001a5f ("gdrom: support highmem") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-06gdrom: support highmemChristoph Hellwig
The gdrom driver only has a single reference to the virtual address of the bio data, and uses that only to get the physical address. Switch to deriving the physical address from the page directly and thus avoid bounce buffering highmem data. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210406061648.811275-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24block: remove unnecessary argument from blk_execute_rqGuoqing Jiang
We can remove 'q' from blk_execute_rq as well after the previous change in blk_execute_rq_nowait. And more importantly it never really was needed to start with given that we can trivial derive it from struct request. Cc: linux-scsi@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: linux-ide@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: linux-nfs@vger.kernel.org Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-12cdrom: Reset sector_size back it is not 2048.Sebastian Andrzej Siewior
In v2.4.0-test2pre2 mmc_ioctl_cdrom_read_data() was extended by issuing a MODE_SELECT opcode to change the sector size and READ_10 to perform the actual read if the READ_CD opcode is not support. The sector size is never changed back to the previous value of 2048 bytes which is however denoted by the comment for version 3.09 of the cdrom.c file. Use cdrom_switch_blocksize() to change the sector size only if the requested size deviates from 2048. Change it back to 2048 after the read operation if a change was mode. Link: https://lkml.kernel.org/r/20201204164803.ovwurzs3257em2rp@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-10gdrom: use bdev_check_media_changeChristoph Hellwig
The Sega GD-ROM driver does not have a ->revalidate_disk method, so it can just use bdev_check_media_change without any additional changes. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08cdrom: remove the unused cdrom_media_changed functionChristoph Hellwig
As well as the ->media_changed method. All these are left over from before the drivers were switched over to the check_events scheme. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-10Merge branch 'work.sysctl' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull sysctl fixes from Al Viro: "Fixups to regressions in sysctl series" * 'work.sysctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: sysctl: reject gigantic reads/write to sysctl files cdrom: fix an incorrect __user annotation on cdrom_sysctl_info trace: fix an incorrect __user annotation on stack_trace_sysctl random: fix an incorrect __user annotation on proc_do_entropy net/sysctl: remove leftover __user annotations on neigh_proc_dointvec* net/sysctl: use cpumask_parse in flow_limit_cpu_sysctl
2020-06-10cdrom: fix an incorrect __user annotation on cdrom_sysctl_infoChristoph Hellwig
No user pointers for sysctls anymore. Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Reported-by: build test robot <lkp@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
2020-05-04cdrom: factor out a cdrom_multisession helperChristoph Hellwig
Factor out a version of the CDROMMULTISESSION ioctl handler that can be called directly from kernel space. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-04cdrom: factor out a cdrom_read_tocentry helperChristoph Hellwig
Factor out a version of the CDROMREADTOCENTRY ioctl handler that can be called directly from kernel space. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-04block: add a cdrom_device_info pointer to struct gendiskChristoph Hellwig
Add a pointer to the CDROM information structure to struct gendisk. This will allow various removable media file systems to call directly into the CDROM layer instead of abusing ioctls with kernel pointers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-27sysctl: pass kernel pointers to ->proc_handlerChristoph Hellwig
Instead of having all the sysctl handlers deal with user pointers, which is rather hairy in terms of the BPF interaction, copy the input to and from userspace in common code. This also means that the strings are always NUL-terminated by the common code, making the API a little bit safer. As most handler just pass through the data to one of the common handlers a lot of the changes are mechnical. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-24scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four ↵Adam Williamson
appropriate places Arnd Bergmann inadvertently typoed these in d320a9551e394 and 64cbfa96551a; they seem to be the cause of https://bugzilla.redhat.com/show_bug.cgi?id=1801353 , invalid SCSI commands when udev tries to query a DVD drive. [arnd] Found another instance of the same bug, also introduced in my compat_ioctl series. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1801353 Link: https://lore.kernel.org/r/20200219165139.3467320-1-arnd@arndb.de Fixes: c103d6ee69f9 ("compat_ioctl: ide: floppy: add handler") Fixes: 64cbfa96551a ("compat_ioctl: move cdrom commands into cdrom.c") Fixes: d320a9551e39 ("compat_ioctl: scsi: move ioctl handling into drivers") Bisected-by: Chris Murphy <bugzilla@colorremedies.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-03compat_ioctl: move cdrom commands into cdrom.cArnd Bergmann
There is no need for the special cases for the cdrom ioctls any more now, so make sure that each cdrom driver has a .compat_ioctl() callback and calls cdrom_compat_ioctl() directly there. Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-01-03compat_ioctl: cdrom: handle CDROM_LAST_WRITTENArnd Bergmann
This is the only ioctl command that does not have a proper compat handler. Making the normal implementation do the right thing is actually very simply, so just do that by using an in_compat_syscall() check to avoid the special case in the pkcdvd driver. Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-01-03compat_ioctl: move CDROMREADADIO to cdrom.cArnd Bergmann
Again, there is only one file that needs this, so move the conversion handler into the native implementation. Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-11-26cdrom: respect device capabilities during opening actionDiego Elio Pettenò
Reading the TOC only works if the device can play audio, otherwise these commands fail (and possibly bring the device to an unhealthy state.) Similarly, cdrom_mmc3_profile() should only be called if the device supports generic packet commands. To: Jens Axboe <axboe@kernel.dk> Cc: linux-kernel@vger.kernel.org Cc: linux-scsi@vger.kernel.org Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-25Merge tag 'printk-for-5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow to print symbolic error names via new %pe modifier. - Use pr_warn() instead of the remaining pr_warning() calls. Fix formatting of the related lines. - Add VSPRINTF entry to MAINTAINERS. * tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits) checkpatch: don't warn about new vsprintf pointer extension '%pe' MAINTAINERS: Add VSPRINTF tools lib api: Renaming pr_warning to pr_warn ASoC: samsung: Use pr_warn instead of pr_warning lib: cpu_rmap: Use pr_warn instead of pr_warning trace: Use pr_warn instead of pr_warning dma-debug: Use pr_warn instead of pr_warning vgacon: Use pr_warn instead of pr_warning fs: afs: Use pr_warn instead of pr_warning sh/intc: Use pr_warn instead of pr_warning scsi: Use pr_warn instead of pr_warning platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning platform/x86: asus-laptop: Use pr_warn instead of pr_warning platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning oprofile: Use pr_warn instead of pr_warning of: Use pr_warn instead of pr_warning macintosh: Use pr_warn instead of pr_warning idsn: Use pr_warn instead of pr_warning ide: Use pr_warn instead of pr_warning crypto: n2: Use pr_warn instead of pr_warning ...
2019-10-18gdrom: Use pr_warn instead of pr_warningKefeng Wang
As said in commit f2c2cbcc35d4 ("powerpc: Use pr_warn instead of pr_warning"), removing pr_warning so all logging messages use a consistent <prefix>_warn style. Let's do it. Link: http://lkml.kernel.org/r/20191018031850.48498-10-wangkefeng.wang@huawei.com To: linux-kernel@vger.kernel.org Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-06-14docs: cdrom: convert docs to ReST and rename to *.rstMauro Carvalho Chehab
The stuff there is almost already at ReST format. A conversion for them is trivial: just add a missing titles and fix some scape codes for them to match ReST syntax. While here, rename the cdrom-standard.txt, with was converted from LaTeX to ReST on the previous patch, and add it to the index file. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-14docs: cdrom-standard.tex: convert from LaTeX to ReSTMauro Carvalho Chehab
This is the only LaTeX documentation file inside the documentation. Instead of having a Latex document directly there, convert it to ReST format, as this is the format we're using for docs. For now, let's keep the extension as .txt in order to avoid warnings when building the documentation with Sphinx. The next patch patch will rename it to .rst and add it to the building system. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option [no]_[pad]_[ctrl] any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 176 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-12Revert "block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe drivers"Martin Wilck
This reverts commit 9fd097b14918875bd6f125ed699d7bbbba5893ee. Instead of leaving disk->events completely empty, we now export the supported events again, and tell the block layer not to forward events to user space by not setting DISK_EVENT_FLAG_UEVENT. This allows the block layer to distinguish between devices that for which events should be handled in kernel only, and devices which don't support any meda change events at all. Cc: Jiri Kosina <jikos@kernel.org> Cc: Tim Waugh <tim@cyberelk.net> Cc: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-08cdrom: Fix race condition in cdrom_sysctl_registerGuenter Roeck
The following traceback is sometimes seen when booting an image in qemu: [ 54.608293] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 54.611085] Fusion MPT base driver 3.04.20 [ 54.611877] Copyright (c) 1999-2008 LSI Corporation [ 54.616234] Fusion MPT SAS Host driver 3.04.20 [ 54.635139] sysctl duplicate entry: /dev/cdrom//info [ 54.639578] CPU: 0 PID: 266 Comm: kworker/u4:5 Not tainted 5.0.0-rc5 #1 [ 54.639578] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 54.641273] Workqueue: events_unbound async_run_entry_fn [ 54.641273] Call Trace: [ 54.641273] dump_stack+0x67/0x90 [ 54.641273] __register_sysctl_table+0x50b/0x570 [ 54.641273] ? rcu_read_lock_sched_held+0x6f/0x80 [ 54.641273] ? kmem_cache_alloc_trace+0x1c7/0x1f0 [ 54.646814] __register_sysctl_paths+0x1c8/0x1f0 [ 54.646814] cdrom_sysctl_register.part.7+0xc/0x5f [ 54.646814] register_cdrom.cold.24+0x2a/0x33 [ 54.646814] sr_probe+0x4bd/0x580 [ 54.646814] ? __driver_attach+0xd0/0xd0 [ 54.646814] really_probe+0xd6/0x260 [ 54.646814] ? __driver_attach+0xd0/0xd0 [ 54.646814] driver_probe_device+0x4a/0xb0 [ 54.646814] ? __driver_attach+0xd0/0xd0 [ 54.646814] bus_for_each_drv+0x73/0xc0 [ 54.646814] __device_attach+0xd6/0x130 [ 54.646814] bus_probe_device+0x9a/0xb0 [ 54.646814] device_add+0x40c/0x670 [ 54.646814] ? __pm_runtime_resume+0x4f/0x80 [ 54.646814] scsi_sysfs_add_sdev+0x81/0x290 [ 54.646814] scsi_probe_and_add_lun+0x888/0xc00 [ 54.646814] ? scsi_autopm_get_host+0x21/0x40 [ 54.646814] __scsi_add_device+0x116/0x130 [ 54.646814] ata_scsi_scan_host+0x93/0x1c0 [ 54.646814] async_run_entry_fn+0x34/0x100 [ 54.646814] process_one_work+0x237/0x5e0 [ 54.646814] worker_thread+0x37/0x380 [ 54.646814] ? rescuer_thread+0x360/0x360 [ 54.646814] kthread+0x118/0x130 [ 54.646814] ? kthread_create_on_node+0x60/0x60 [ 54.646814] ret_from_fork+0x3a/0x50 The only sensible explanation is that cdrom_sysctl_register() is called twice, once from the module init function and once from register_cdrom(). cdrom_sysctl_register() is not mutex protected and may happily execute twice if the second call is made before the first call is complete. Use a static atomic to ensure that the function is executed exactly once. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-29gdrom: fix a memory leak bugWenwen Wang
In probe_gdrom(), the buffer pointed by 'gd.cd_info' is allocated through kzalloc() and is used to hold the information of the gdrom device. To register and unregister the device, the pointer 'gd.cd_info' is passed to the functions register_cdrom() and unregister_cdrom(), respectively. However, this buffer is not freed after it is used, which can cause a memory leak bug. This patch simply frees the buffer 'gd.cd_info' in exit_gdrom() to fix the above issue. Signed-off-by: Wenwen Wang <wang6495@umn.edu> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25gdrom: fix mistake in assignment of errorJens Axboe
Apparently the kbuild bots missed this one originally, but at least it caught it now. Fix compilation error: All errors (new ones prefixed by >>): drivers/cdrom/gdrom.c: In function 'probe_gdrom': >> drivers/cdrom/gdrom.c:797:3: error: 'rc' undeclared (first use in this function) rc = PTR_ERR(gd.gdrom_rq); ^~ drivers/cdrom/gdrom.c:797:3: note: each undeclared identifier is reported only once for each function it appears in Fixes: ad5fc6bb7221 ("gdrom: convert to blk-mq") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25cdrom: remove set but not used variable 'tocuse'zhong jiang
tocuse is not used after setting its value. It is safe to remove the unused variable. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16gdrom: convert to blk-mqJens Axboe
Ditch the deffered list, lock, and workqueue handling. Just mark the set as being blocking, so we are invoked from a workqueue already. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-14cdrom: don't attempt to fiddle with cdo->capabilityJens Axboe
We can't modify cdo->capability as it is defined as a const. Change the modification hack to just WARN_ON_ONCE() if we hit any of the invalid combinations. This fixes a regression for pcd, which doesn't work after the constify patch. Fixes: 853fe1bf7554 ("cdrom: Make device operations read-only") Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-03cdrom: fix improper type cast, which can leat to information leak.Young_X
There is another cast from unsigned long to int which causes a bounds check to fail with specially crafted input. The value is then used as an index in the slot array in cdrom_slot_status(). This issue is similar to CVE-2018-16658 and CVE-2018-10940. Signed-off-by: Young_X <YangX92@hotmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-29cdrom: Fix info leak/OOB read in cdrom_ioctl_drive_statusScott Bauer
Like d88b6d04: "cdrom: information leak in cdrom_ioctl_media_changed()" There is another cast from unsigned long to int which causes a bounds check to fail with specially crafted input. The value is then used as an index in the slot array in cdrom_slot_status(). Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Scott Bauer <sbauer@plzdonthack.me> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-02cdrom: Use struct scsi_sense_hdr internallyKees Cook
This removes more casts of struct request_sense and uses the standard struct scsi_sense_hdr instead. This also fixes any possible stale values since the prior code did not check the sense length. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-02block: Switch struct packet_command to use struct scsi_sense_hdrKees Cook
There is a lot of needless struct request_sense usage in the CDROM code. These can all be struct scsi_sense_hdr instead, to avoid any confusion over their respective structure sizes. This patch is a lot of noise changing "sense" to "sshdr", but the final code is more readable to distinguish between "sense" meaning "struct request_sense" and "sshdr" meaning "struct scsi_sense_hdr". Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-14block: sanitize blk_get_request calling conventionsChristoph Hellwig
Switch everyone to blk_get_request_flags, and then rename blk_get_request_flags to blk_get_request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-18cdrom: information leak in cdrom_ioctl_media_changed()Dan Carpenter
This cast is wrong. "cdi->capacity" is an int and "arg" is an unsigned long. The way the check is written now, if one of the high 32 bits is set then we could read outside the info->slots[] array. This bug is pretty old and it predates git. Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-09cdrom: do not call check_disk_change() inside cdrom_open()Maurizio Lombardi
when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] #8 [ffff880078447da8] mount_bdev at ffffffff81202570 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] #10 [ffff880078447e28] mount_fs at ffffffff81202d09 #11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f #12 [ffff880078447ea8] do_mount at ffffffff81220fee #13 [ffff880078447f28] sys_mount at ffffffff812218d6 #14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 #1 [ffff880078417900] schedule at ffffffff8168dc59 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 #4 [ffff8800784179d0] down_read at ffffffff8168cde0 #5 [ffff8800784179e8] get_super at ffffffff81201cc7 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de #7 [ffff880078417a40] flush_disk at ffffffff8123a94b #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] #10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] #11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 #12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 #13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b #14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 #15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf #16 [ffff880078417d00] do_last at ffffffff8120d53d #17 [ffff880078417db0] path_openat at ffffffff8120e6b2 #18 [ffff880078417e48] do_filp_open at ffffffff8121082b #19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 #20 [ffff880078417f70] sys_open at ffffffff811fde4e #21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-14Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01block: Rework drivers/cdrom/MakefileBart Van Assche
Instead of referring from inside drivers/cdrom/Makefile to all the drivers that use this driver, let these drivers select the cdrom driver. This change makes the cdrom build code follow the approach that is used for most other drivers, namely refer from the higher layers to the lower layer instead of from the lower layer to the higher layers. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27block: don't set bounce limit in blk_init_queueChristoph Hellwig
Instead move it to the callers. Those that either don't use bio_data() or page_address() or are specific to architectures that do not support highmem are skipped. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-20block: Make most scsi_req_init() calls implicitBart Van Assche
Instead of explicitly calling scsi_req_init() after blk_get_request(), call that function from inside blk_get_request(). Add an .initialize_rq_fn() callback function to the block drivers that need it. Merge the IDE .init_rq_fn() function into .initialize_rq_fn() because it is too small to keep it as a separate function. Keep the scsi_req_init() call in ide_prep_sense() because it follows a blk_rq_init() call. References: commit 82ed4db499b8 ("block: split scsi_request out of struct request") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>