summaryrefslogtreecommitdiff
path: root/drivers/char/ipmi/ipmi_msghandler.c
AgeCommit message (Collapse)Author
2019-08-22ipmi: move message error checking to avoid deadlockTony Camuso
V1->V2: in handle_one_rcv_msg, if data_size > 2, set requeue to zero and goto out instead of calling ipmi_free_msg. Kosuke Tatsukawa <tatsu@ab.jp.nec.com> In the source stack trace below, function set_need_watch tries to take out the same si_lock that was taken earlier by ipmi_thread. ipmi_thread() [drivers/char/ipmi/ipmi_si_intf.c:995] smi_event_handler() [drivers/char/ipmi/ipmi_si_intf.c:765] handle_transaction_done() [drivers/char/ipmi/ipmi_si_intf.c:555] deliver_recv_msg() [drivers/char/ipmi/ipmi_si_intf.c:283] ipmi_smi_msg_received() [drivers/char/ipmi/ipmi_msghandler.c:4503] intf_err_seq() [drivers/char/ipmi/ipmi_msghandler.c:1149] smi_remove_watch() [drivers/char/ipmi/ipmi_msghandler.c:999] set_need_watch() [drivers/char/ipmi/ipmi_si_intf.c:1066] Upstream commit e1891cffd4c4896a899337a243273f0e23c028df adds code to ipmi_smi_msg_received() to call smi_remove_watch() via intf_err_seq() and this seems to be causing the deadlock. commit e1891cffd4c4896a899337a243273f0e23c028df Author: Corey Minyard <cminyard@mvista.com> Date: Wed Oct 24 15:17:04 2018 -0500 ipmi: Make the smi watcher be disabled immediately when not needed The fix is to put all messages in the queue and move the message checking code out of ipmi_smi_msg_received and into handle_one_recv_msg, which processes the message checking after ipmi_thread releases its locks. Additionally,Kosuke Tatsukawa <tatsu@ab.jp.nec.com> reported that handle_new_recv_msgs calls ipmi_free_msg when handle_one_rcv_msg returns zero, so that the call to ipmi_free_msg in handle_one_rcv_msg introduced another panic when "ipmitool sensor list" was run in a loop. He submitted this part of the patch. +free_msg: + requeue = 0; + goto out; Reported by: Osamu Samukawa <osa-samukawa@tg.jp.nec.com> Characterized by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Signed-off-by: Tony Camuso <tcamuso@redhat.com> Fixes: e1891cffd4c4 ("ipmi: Make the smi watcher be disabled immediately when not needed") Cc: stable@vger.kernel.org # 5.1 Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-08-16ipmi: Free receive messages when in an oopsCorey Minyard
If the driver handles a response in an oops, it was just ignoring the message. However, the IPMI watchdog timer was counting on the free happening to know when panic-time messages were complete. So free it in all cases. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-06-24driver_find_device: Unify the match function with class_find_device()Suzuki K Poulose
The driver_find_device() accepts a match function pointer to filter the devices for lookup, similar to bus/class_find_device(). However, there is a minor difference in the prototype for the match parameter for driver_find_device() with the now unified version accepted by {bus/class}_find_device(), where it doesn't accept a "const" qualifier for the data argument. This prevents us from reusing the generic match functions for driver_find_device(). For this reason, change the prototype of the driver_find_device() to make the "match" parameter in line with {bus/class}_find_device() and adjust its callers to use the const qualifier. Also, we could now promote the "data" parameter to const as we pass it down as a const parameter to the match functions. Cc: Corey Minyard <minyard@acm.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com> Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-17ipmi: avoid atomic_inc in exit functionArnd Bergmann
This causes a link failure on ARM in certain configurations, when we reference each atomic operation from .alt.smp.init in order to patch out atomics on non-SMP systems: `.exit.text' referenced in section `.alt.smp.init' of drivers/char/ipmi/ipmi_msghandler.o: defined in discarded section `.exit.text' of drivers/char/ipmi/ipmi_msghandler.o In this case, we can trivially replace the atomic_inc() with an atomic_set() that has the same effect and does not require a fixup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Message-Id: <20190415155509.3565087-1-arnd@arndb.de> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-04-17ipmi: Make ipmi_interfaces_srcu variable staticYueHaibing
Fix sparse warning: drivers/char/ipmi/ipmi_msghandler.c:635:20: warning: symbol 'ipmi_interfaces_srcu' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Message-Id: <20190320133505.21984-1-yuehaibing@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-04-17ipmi: fix sleep-in-atomic in free_user at cleanup SRCU user->release_barrierCorey Minyard
free_user() could be called in atomic context. This patch pushed the free operation off into a workqueue. Example: BUG: sleeping function called from invalid context at kernel/workqueue.c:2856 in_atomic(): 1, irqs_disabled(): 0, pid: 177, name: ksoftirqd/27 CPU: 27 PID: 177 Comm: ksoftirqd/27 Not tainted 4.19.25-3 #1 Hardware name: AIC 1S-HV26-08/MB-DPSB04-06, BIOS IVYBV060 10/21/2015 Call Trace: dump_stack+0x5c/0x7b ___might_sleep+0xec/0x110 __flush_work+0x48/0x1f0 ? try_to_del_timer_sync+0x4d/0x80 _cleanup_srcu_struct+0x104/0x140 free_user+0x18/0x30 [ipmi_msghandler] ipmi_free_recv_msg+0x3a/0x50 [ipmi_msghandler] deliver_response+0xbd/0xd0 [ipmi_msghandler] deliver_local_response+0xe/0x30 [ipmi_msghandler] handle_one_recv_msg+0x163/0xc80 [ipmi_msghandler] ? dequeue_entity+0xa0/0x960 handle_new_recv_msgs+0x15c/0x1f0 [ipmi_msghandler] tasklet_action_common.isra.22+0x103/0x120 __do_softirq+0xf8/0x2d7 run_ksoftirqd+0x26/0x50 smpboot_thread_fn+0x11d/0x1e0 kthread+0x103/0x140 ? sort_range+0x20/0x20 ? kthread_destroy_worker+0x40/0x40 ret_from_fork+0x1f/0x40 Fixes: 77f8269606bf ("ipmi: fix use-after-free of user->release_barrier.rda") Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org # 5.0 Cc: Yang Yingliang <yangyingliang@huawei.com>
2019-02-09ipmi: Use dedicated API for copying a UUIDAndy Shevchenko
Use guid_copy() instead of memcpy() to hide guid_t implementation details and to show we expect guid_t in a raw buffer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-09ipmi: Use defined constant for UUID representationAndy Shevchenko
Instead of magic number use pre-defined constant for UUID binary and string representations. While here, drop the implementation details of guid_t type. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [Also converted a "17" in the error string to UUID_SIZE + 1] Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-09ipmi: Make the smi watcher be disabled immediately when not neededCorey Minyard
The code to tell the lower layer to enable or disable watching for certain things was lazy in disabling, it waited until a timer tick to see if a disable was necessary. Not a really big deal, but it could be improved. Modify the code to enable and disable watching immediately and don't do it from the background timer any more. Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Kamlakant Patel <kamlakant.patel@cavium.com>
2019-02-09ipmi: Fix how the lower layers are told to watch for messagesCorey Minyard
The IPMI driver has a mechanism to tell the lower layers it needs to watch for messages, commands, and watchdogs (so it doesn't needlessly poll). However, it needed some extensions, it needed a way to tell what is being waited for so it could set the timeout appropriately. The update to the lower layer was also being done once a second at best because it was done in the main timeout handler. However, if a command is sent and a response message is coming back, it needed to be started immediately. So modify the code to update immediately if it needs to be enabled. Disable is still lazy. Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Kamlakant Patel <kamlakant.patel@cavium.com>
2019-01-23ipmi: Don't initialize anything in the core until something uses itCorey Minyard
The IPMI driver was recently modified to use SRCU, but it turns out this uses a chunk of percpu memory, even if IPMI is never used. So modify thing to on initialize on the first use. There was already code to sort of handle this for handling init races, so piggy back on top of that, and simplify it in the process. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reported-by: Tejun Heo <tj@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # 4.18
2019-01-23ipmi: fix use-after-free of user->release_barrier.rdaYang Yingliang
When we do the following test, we got oops in ipmi_msghandler driver while((1)) do service ipmievd restart & service ipmievd restart done --------------------------------------------------------------- [ 294.230186] Unable to handle kernel paging request at virtual address 0000803fea6ea008 [ 294.230188] Mem abort info: [ 294.230190] ESR = 0x96000004 [ 294.230191] Exception class = DABT (current EL), IL = 32 bits [ 294.230193] SET = 0, FnV = 0 [ 294.230194] EA = 0, S1PTW = 0 [ 294.230195] Data abort info: [ 294.230196] ISV = 0, ISS = 0x00000004 [ 294.230197] CM = 0, WnR = 0 [ 294.230199] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000a1c1b75a [ 294.230201] [0000803fea6ea008] pgd=0000000000000000 [ 294.230204] Internal error: Oops: 96000004 [#1] SMP [ 294.235211] Modules linked in: nls_utf8 isofs rpcrdma ib_iser ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_umad rdma_cm ib_cm iw_cm dm_mirror dm_region_hash dm_log dm_mod aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce sha2_ce ses sha256_arm64 sha1_ce hibmc_drm hisi_sas_v2_hw enclosure sg hisi_sas_main sbsa_gwdt ip_tables mlx5_ib ib_uverbs marvell ib_core mlx5_core ixgbe ipmi_si mdio hns_dsaf ipmi_devintf ipmi_msghandler hns_enet_drv hns_mdio [ 294.277745] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.0.0-rc2+ #113 [ 294.285511] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.37 11/21/2017 [ 294.292835] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 294.297695] pc : __srcu_read_lock+0x38/0x58 [ 294.301940] lr : acquire_ipmi_user+0x2c/0x70 [ipmi_msghandler] [ 294.307853] sp : ffff00001001bc80 [ 294.311208] x29: ffff00001001bc80 x28: ffff0000117e5000 [ 294.316594] x27: 0000000000000000 x26: dead000000000100 [ 294.321980] x25: dead000000000200 x24: ffff803f6bd06800 [ 294.327366] x23: 0000000000000000 x22: 0000000000000000 [ 294.332752] x21: ffff00001001bd04 x20: ffff80df33d19018 [ 294.338137] x19: ffff80df33d19018 x18: 0000000000000000 [ 294.343523] x17: 0000000000000000 x16: 0000000000000000 [ 294.348908] x15: 0000000000000000 x14: 0000000000000002 [ 294.354293] x13: 0000000000000000 x12: 0000000000000000 [ 294.359679] x11: 0000000000000000 x10: 0000000000100000 [ 294.365065] x9 : 0000000000000000 x8 : 0000000000000004 [ 294.370451] x7 : 0000000000000000 x6 : ffff80df34558678 [ 294.375836] x5 : 000000000000000c x4 : 0000000000000000 [ 294.381221] x3 : 0000000000000001 x2 : 0000803fea6ea000 [ 294.386607] x1 : 0000803fea6ea008 x0 : 0000000000000001 [ 294.391994] Process swapper/3 (pid: 0, stack limit = 0x0000000083087293) [ 294.398791] Call trace: [ 294.401266] __srcu_read_lock+0x38/0x58 [ 294.405154] acquire_ipmi_user+0x2c/0x70 [ipmi_msghandler] [ 294.410716] deliver_response+0x80/0xf8 [ipmi_msghandler] [ 294.416189] deliver_local_response+0x28/0x68 [ipmi_msghandler] [ 294.422193] handle_one_recv_msg+0x158/0xcf8 [ipmi_msghandler] [ 294.432050] handle_new_recv_msgs+0xc0/0x210 [ipmi_msghandler] [ 294.441984] smi_recv_tasklet+0x8c/0x158 [ipmi_msghandler] [ 294.451618] tasklet_action_common.isra.5+0x88/0x138 [ 294.460661] tasklet_action+0x2c/0x38 [ 294.468191] __do_softirq+0x120/0x2f8 [ 294.475561] irq_exit+0x134/0x140 [ 294.482445] __handle_domain_irq+0x6c/0xc0 [ 294.489954] gic_handle_irq+0xb8/0x178 [ 294.497037] el1_irq+0xb0/0x140 [ 294.503381] arch_cpu_idle+0x34/0x1a8 [ 294.510096] do_idle+0x1d4/0x290 [ 294.516322] cpu_startup_entry+0x28/0x30 [ 294.523230] secondary_start_kernel+0x184/0x1d0 [ 294.530657] Code: d538d082 d2800023 8b010c81 8b020021 (c85f7c25) [ 294.539746] ---[ end trace 8a7a880dee570b29 ]--- [ 294.547341] Kernel panic - not syncing: Fatal exception in interrupt [ 294.556837] SMP: stopping secondary CPUs [ 294.563996] Kernel Offset: disabled [ 294.570515] CPU features: 0x002,21006008 [ 294.577638] Memory Limit: none [ 294.587178] Starting crashdump kernel... [ 294.594314] Bye! Because the user->release_barrier.rda is freed in ipmi_destroy_user(), but the refcount is not zero, when acquire_ipmi_user() uses user->release_barrier.rda in __srcu_read_lock(), it causes oops. Fix this by calling cleanup_srcu_struct() when the refcount is zero. Fixes: e86ee2d44b44 ("ipmi: Rework locking and shutdown for hot remove") Cc: stable@vger.kernel.org # 4.18 Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-01-23ipmi: Prevent use-after-free in deliver_responseFred Klassen
Some IPMI modules (e.g. ibmpex_msg_handler()) will have ipmi_usr_hdlr handlers that call ipmi_free_recv_msg() directly. This will essentially kfree(msg), leading to use-after-free. This does not happen in the ipmi_devintf module, which will queue the message and run ipmi_free_recv_msg() later. BUG: KASAN: use-after-free in deliver_response+0x12f/0x1b0 Read of size 8 at addr ffff888a7bf20018 by task ksoftirqd/3/27 CPU: 3 PID: 27 Comm: ksoftirqd/3 Tainted: G O 4.19.11-amd64-ani99-debug #12.0.1.601133+pv Hardware name: AppNeta r1000/X11SPW-TF, BIOS 2.1a-AP 09/17/2018 Call Trace: dump_stack+0x92/0xeb print_address_description+0x73/0x290 kasan_report+0x258/0x380 deliver_response+0x12f/0x1b0 ? ipmi_free_recv_msg+0x50/0x50 deliver_local_response+0xe/0x50 handle_one_recv_msg+0x37a/0x21d0 handle_new_recv_msgs+0x1ce/0x440 ... Allocated by task 9885: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc_trace+0x116/0x290 ipmi_alloc_recv_msg+0x28/0x70 i_ipmi_request+0xb4a/0x1640 ipmi_request_settime+0x1b8/0x1e0 ... Freed by task 27: __kasan_slab_free+0x12e/0x180 kfree+0xe9/0x280 deliver_response+0x122/0x1b0 deliver_local_response+0xe/0x50 handle_one_recv_msg+0x37a/0x21d0 handle_new_recv_msgs+0x1ce/0x440 tasklet_action_common.isra.19+0xc4/0x250 __do_softirq+0x11f/0x51f Fixes: e86ee2d44b44 ("ipmi: Rework locking and shutdown for hot remove") Cc: stable@vger.kernel.org # 4.18 Signed-off-by: Fred Klassen <fklassen@appneta.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-01-23ipmi: msghandler: Fix potential Spectre v1 vulnerabilitiesGustavo A. R. Silva
channel and addr->channel are indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. These issues were detected with the help of Smatch: drivers/char/ipmi/ipmi_msghandler.c:1381 ipmi_set_my_address() warn: potential spectre issue 'user->intf->addrinfo' [w] (local cap) drivers/char/ipmi/ipmi_msghandler.c:1401 ipmi_get_my_address() warn: potential spectre issue 'user->intf->addrinfo' [r] (local cap) drivers/char/ipmi/ipmi_msghandler.c:1421 ipmi_set_my_LUN() warn: potential spectre issue 'user->intf->addrinfo' [w] (local cap) drivers/char/ipmi/ipmi_msghandler.c:1441 ipmi_get_my_LUN() warn: potential spectre issue 'user->intf->addrinfo' [r] (local cap) drivers/char/ipmi/ipmi_msghandler.c:2260 check_addr() warn: potential spectre issue 'intf->addrinfo' [r] (local cap) Fix this by sanitizing channel and addr->channel before using them to index user->intf->addrinfo and intf->addrinfo, correspondingly. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/ Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi: fix return value of ipmi_set_my_LUNYueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/char/ipmi/ipmi_msghandler.c: In function 'ipmi_set_my_LUN': drivers/char/ipmi/ipmi_msghandler.c:1335:13: warning: variable 'rv' set but not used [-Wunused-but-set-variable] int index, rv = 0; 'rv' should be the correct return value. Fixes: 048f7c3e352e ("ipmi: Properly release srcu locks on error conditions") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi: msghandler: Add and use pr_fmt and dev_fmt, remove PFXJoe Perches
Standardize the prefixing of output messages using the pr_fmt and dev_fmt mechanisms instead of a separate #define PFX Miscellanea: o Because this message prefix is very long, use a non-standard define of #define pr_fmt(fmt) "%s" fmt, "IPMI message handler: " which removes ~170 bytes of object code in an x86-64 defconfig with ipmi (with even more object code reduction on 32 bit compilations) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-08-31ipmi: Rework SMI registration failureCorey Minyard
There were certain situations where ipmi_register_smi() would return a failure, but the interface would still be registered and would need to be unregistered. This is obviously a bad design and resulted in an oops in certain failure cases. If the interface is started up in ipmi_register_smi(), then an error occurs, shut down the interface there so the cleanup can be done properly. Fix the various smi users, too. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reported-by: Justin Ernst <justin.ernst@hpe.com> Tested-by: Justin Ernst <justin.ernst@hpe.com> Cc: Andrew Banman <abanman@hpe.com> Cc: Russ Anderson <russ.anderson@hpe.com> Cc: <stable@vger.kernel.org> # 4.18.x
2018-05-24ipmi: Properly release srcu locks on error conditionsCorey Minyard
When SRCU was added for handling hotplug, some error conditions were not handled properly. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-05-09ipmi: Remove the proc interfaceCorey Minyard
It has been deprecated long enough, get rid of it. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: ipmi_unregister_smi() cannot fail, have it return voidCorey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Remove condition on interface shutdownCorey Minyard
Now that the interfaces have shutdown handlers, this no longer needs to be conditional. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Rework locking and shutdown for hot removeCorey Minyard
To handle hot remove of interfaces, a lot of rework had to be done to the locking. Several things were switched over to srcu and shutdown for users and interfaces was added for cleaner shutdown. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Fix some counter issuesCorey Minyard
Counters would not be pegged properly on some errors. Have deliver_response() return an error so the counters can be incremented properly. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Change ipmi_smi_t to struct ipmi_smi *Corey Minyard
Get rid of this coding style violation in the user files. Include files will come later. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Rename ipmi_user_t to struct ipmi_user *Corey Minyard
Get rid of that non-compliance in the user files. Include files will come later. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Clean up some style issues in the message handlerCorey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Break up i_ipmi_requestCorey Minyard
It was huge, and easily broken into pieces. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Clean up some debug codeCorey Minyard
Replace ifdefs in the code with a simple function. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Add a panic handler for IPMI usersCorey Minyard
Users of the IPMI code had their own panic handlers, but the order was not necessarily right, the base IPMI code would need to handle the panic first, and the user had no way to know if the IPMI interface could run at panic time. Add a panic handler to the user interface, it is called if non-NULL and the interface the user is on is capable of panic handling. It also cleans up the panic log handling a bit to reuse the existing interface loop in the main panic handler. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Add a maintenance mode for IPMB messagesCorey Minyard
If you send a command to another BMC that might take some extra time, increase the timeouts temporarily. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Add a way to tune some timeoutsCorey Minyard
By default the retry timeout is 1 second. Allow that to be modified, primarily for slow operations, like firmware writes. Also, the timeout was driven by a 1 second timer, so 1 second really meant between 0 and 1 second. Set the default to 2 seconds so it means between 1 and 2 seconds. Also allow the time the interface automatically stays in mainenance mode to be modified from it's default 30 seconds. Also consolidate some of the timeout and retry setup. Signed-off-by: Corey Minyard <cminyard@mvista.com> more
2018-02-27ipmi: Add or fix SPDX-License-Identifier in all filesCorey Minyard
And get rid of the license text that is no longer necessary. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Kees Cook <keescook@chromium.org> Cc: Alistair Popple <alistair@popple.id.au> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Joel Stanley <joel@jms.id.au> Cc: Rocky Craig <rocky.craig@hp.com>
2018-02-01Merge tag 'driver-core-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of "big" driver core patches for 4.16-rc1. The majority of the work here is in the firmware subsystem, with reworks to try to attempt to make the code easier to handle in the long run, but no functional change. There's also some tree-wide sysfs attribute fixups with lots of acks from the various subsystem maintainers, as well as a handful of other normal fixes and changes. And finally, some license cleanups for the driver core and sysfs code. All have been in linux-next for a while with no reported issues" * tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits) device property: Define type of PROPERTY_ENRTY_*() macros device property: Reuse property_entry_free_data() device property: Move property_entry_free_data() upper firmware: Fix up docs referring to FIRMWARE_IN_KERNEL firmware: Drop FIRMWARE_IN_KERNEL Kconfig option USB: serial: keyspan: Drop firmware Kconfig options sysfs: remove DEBUG defines sysfs: use SPDX identifiers drivers: base: add coredump driver ops sysfs: add attribute specification for /sysfs/devices/.../coredump test_firmware: fix missing unlock on error in config_num_requests_store() test_firmware: make local symbol test_fw_config static sysfs: turn WARN() into pr_warn() firmware: Fix a typo in fallback-mechanisms.rst treewide: Use DEVICE_ATTR_WO treewide: Use DEVICE_ATTR_RO treewide: Use DEVICE_ATTR_RW sysfs.h: Use octal permissions component: add debugfs support bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate ...
2018-01-09treewide: Use DEVICE_ATTR_ROJoe Perches
Convert DEVICE_ATTR uses to DEVICE_ATTR_RO where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(?:\s*S_IRUGO\s*|\s*0444\s*)\)?\s*,\s*\1_show\s*,\s*NULL\s*\)/DEVICE_ATTR_RO(\1)/g; print;}' Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08ipmi: use correct string lengthXiongfeng Wang
gcc-8 reports drivers/char/ipmi/ipmi_msghandler.c: In function 'panic_op_write_handler': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified bound 16 equals destination size [-Wstringop-truncation] drivers/char/ipmi/ipmi_watchdog.c: In function 'set_param_str': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified bound 16 equals destination size [-Wstringop-truncation] We need one less byte or call strlcpy() to make it a nul-terminated string. Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-09-28ipmi: remove redundant initialization of bmcColin Ian King
The pointer bmc is being initialized and this initialized value is never being read, so this is assignment redundant and can be removed. Cleans up clang warning: warning: Value stored to 'bmc' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi: Clean up some print operationsCorey Minyard
Get rid of all printfs, using dev_xxx() if a device is available, pr_xxx() otherwise, and format long strings properly. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi: Make the DMI probe into a generic platform probeCorey Minyard
Rework the DMI probe function to be a generic platform probe, and then rework the DMI code (and a few other things) to use the more generic information. This is so other things can declare platform IPMI devices. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi: Make the IPMI proc interface configurableCorey Minyard
So we can remove it later. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Convert IPMI GUID over to Linux guid_tCorey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Rescan channel list on BMC changesCorey Minyard
If the BMC changes versions or a change is otherwise detected, rescan the channels on the BMC. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Move lun and address out of channel structCorey Minyard
Put it in it's own struct, getting ready for channel information being dynamically changed. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Retry BMC registration on a failureCorey Minyard
If the BMC fails to register, just set up to retry periodically. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Rework device id and guid handling to catch changing BMCsCorey Minyard
A BMC's guid or device id info may change dynamically, this could result in a different configuration that needs to be done. Adjust the BMCs dynamically. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Use a temporary BMC for an interfaceCorey Minyard
This is getting ready for the ability to redo the BMC if it's information changes, we need a fallback mechanism. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Dynamically fetch GUID periodicallyCorey Minyard
This will catch if the GUID changes. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Always fetch the guid through ipmi_get_device_id()Corey Minyard
This is in preparation for making ipmi_get_device_id() dynamically return the guid and device id. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Remove the device id from ipmi_register_smi()Corey Minyard
It's no longer used, dynamic device id handling is in place now. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: allow dynamic BMC version informationJeremy Kerr
Currently, it's up to the IPMI SMIs to provide the product & version details of BMCs behind registered IPMI SMI interfaces. This device ID is provided on SMI regsitration, and kept around for all future queries. However, this version information isn't always static. For example, a BMC may be upgraded at runtime, making the old version information stale. This change allows querying the BMC device ID & version information dynamically. If no static device_id argument is provided to ipmi_register_smi, then the IPMI core code will perform a Get Device ID IPMI command to query the version information when needed. We keep a short-term cache of this information so we don't need to re-query for every attribute access. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> I basically rewrote this, I fixed some locking issues and simplified things. Same functional change, though. Signed-off-by: Corey Minyard <cminyard@mvista.com>
generated by cgit (git 2.34.1) at 2025-04-25 02:34:03 +0000