summaryrefslogtreecommitdiff
path: root/drivers/char/mem.c
AgeCommit message (Collapse)Author
2021-09-14/dev/mem: nowait zero/null opsPavel Begunkov
Make read_iter_zero() to honor IOCB_NOWAIT, so /dev/zero can be advertised as FMODE_NOWAIT. It's useful for io_uring, which needs it to apply certain optimisations when doing I/O against the device. Set FMODE_NOWAIT for /dev/null as well, it never waits and therefore trivially meets the criteria. Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/f11090f97ddc2b2ce49ea1211258658ddfbc5563.1631127867.git.asml.silence@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04remove the raw driverChristoph Hellwig
The raw driver used to provide direct unbuffered access to block devices before O_DIRECT was invented. It has been obsolete for more than a decade. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/lkml/Pine.LNX.4.64.0703180754060.6605@CPE00045a9c397f-CM001225dbafb6/ Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210531072526.97052-1-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-07drivers/char: remove /dev/kmem for goodDavid Hildenbrand
Patch series "drivers/char: remove /dev/kmem for good". Exploring /dev/kmem and /dev/mem in the context of memory hot(un)plug and memory ballooning, I started questioning the existence of /dev/kmem. Comparing it with the /proc/kcore implementation, it does not seem to be able to deal with things like a) Pages unmapped from the direct mapping (e.g., to be used by secretmem) -> kern_addr_valid(). virt_addr_valid() is not sufficient. b) Special cases like gart aperture memory that is not to be touched -> mem_pfn_is_ram() Unless I am missing something, it's at least broken in some cases and might fault/crash the machine. Looks like its existence has been questioned before in 2005 and 2010 [1], after ~11 additional years, it might make sense to revive the discussion. CONFIG_DEVKMEM is only enabled in a single defconfig (on purpose or by mistake?). All distributions disable it: in Ubuntu it has been disabled for more than 10 years, in Debian since 2.6.31, in Fedora at least starting with FC3, in RHEL starting with RHEL4, in SUSE starting from 15sp2, and OpenSUSE has it disabled as well. 1) /dev/kmem was popular for rootkits [2] before it got disabled basically everywhere. Ubuntu documents [3] "There is no modern user of /dev/kmem any more beyond attackers using it to load kernel rootkits.". RHEL documents in a BZ [5] "it served no practical purpose other than to serve as a potential security problem or to enable binary module drivers to access structures/functions they shouldn't be touching" 2) /proc/kcore is a decent interface to have a controlled way to read kernel memory for debugging puposes. (will need some extensions to deal with memory offlining/unplug, memory ballooning, and poisoned pages, though) 3) It might be useful for corner case debugging [1]. KDB/KGDB might be a better fit, especially, to write random memory; harder to shoot yourself into the foot. 4) "Kernel Memory Editor" [4] hasn't seen any updates since 2000 and seems to be incompatible with 64bit [1]. For educational purposes, /proc/kcore might be used to monitor value updates -- or older kernels can be used. 5) It's broken on arm64, and therefore, completely disabled there. Looks like it's essentially unused and has been replaced by better suited interfaces for individual tasks (/proc/kcore, KDB/KGDB). Let's just remove it. [1] https://lwn.net/Articles/147901/ [2] https://www.linuxjournal.com/article/10505 [3] https://wiki.ubuntu.com/Security/Features#A.2Fdev.2Fkmem_disabled [4] https://sourceforge.net/projects/kme/ [5] https://bugzilla.redhat.com/show_bug.cgi?id=154796 Link: https://lkml.kernel.org/r/20210324102351.6932-1-david@redhat.com Link: https://lkml.kernel.org/r/20210324102351.6932-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Chris Zankel <chris@zankel.net> Cc: Corentin Labbe <clabbe@baylibre.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Hillf Danton <hdanton@sina.com> Cc: huang ying <huang.ying.caritas@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: James Troup <james.troup@canonical.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kairui Song <kasong@redhat.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Niklas Schnelle <schnelle@linux.ibm.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: openrisc@lists.librecores.org Cc: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: "Pavel Machek (CIP)" <pavel@denx.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Pierre Morel <pmorel@linux.ibm.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Robert Richter <rric@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: sparclinux@vger.kernel.org Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Theodore Dubois <tblodt@icloud.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: William Cohen <wcohen@redhat.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-22Merge tag 'topic/iomem-mmap-vs-gup-2021-02-22' of ↵Linus Torvalds
git://anongit.freedesktop.org/drm/drm Pull follow_pfn() updates from Daniel Vetter: "Fixes around VM_FPNMAP and follow_pfn: - replace mm/frame_vector.c by get_user_pages in misc/habana and drm/exynos drivers, then move that into media as it's sole user - close race in generic_access_phys - s390 pci ioctl fix of this series landed in 5.11 already - properly revoke iomem mappings (/dev/mem, pci files)" * tag 'topic/iomem-mmap-vs-gup-2021-02-22' of git://anongit.freedesktop.org/drm/drm: PCI: Revoke mappings like devmem PCI: Also set up legacy files only after sysfs init sysfs: Support zapping of binary attr mmaps resource: Move devmem revoke code to resource framework /dev/mem: Only set filp->f_mapping PCI: Obey iomem restrictions for procfs mmap mm: Close race in generic_access_phys media: videobuf2: Move frame_vector into media subsystem mm/frame-vector: Use FOLL_LONGTERM misc/habana: Use FOLL_LONGTERM for userptr misc/habana: Stop using frame_vector helpers drm/exynos: Use FOLL_LONGTERM for g2d cmdlists drm/exynos: Stop using frame_vector helpers
2021-01-27MIPS: mm:remove function __uncached_access()Yanteng Si
MIPS can now use the default uncached_access like other archs. Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-12resource: Move devmem revoke code to resource frameworkDaniel Vetter
We want all iomem mmaps to consistently revoke ptes when the kernel takes over and CONFIG_IO_STRICT_DEVMEM is enabled. This includes the pci bar mmaps available through procfs and sysfs, which currently do not revoke mappings. To prepare for this, move the code from the /dev/kmem driver to kernel/resource.c. During review Jason spotted that barriers are used somewhat inconsistently. Fix that up while we shuffle this code, since it doesn't have an actual impact at runtime. Otherwise no semantic and behavioural changes intended, just code extraction and adjusting comments and names. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kees Cook <keescook@chromium.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Hildenbrand <david@redhat.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-11-daniel.vetter@ffwll.ch
2021-01-12/dev/mem: Only set filp->f_mappingDaniel Vetter
When we care about pagecache maintenance, we need to make sure that both f_mapping and i_mapping point at the right mapping. But for iomem mappings we only care about the virtual/pte side of things, so f_mapping is enough. Also setting inode->i_mapping was confusing me as a driver maintainer, since in e.g. drivers/gpu we don't do that. Per Dan this seems to be copypasta from places which do care about pagecache consistency, but not needed. Hence remove it for slightly less confusion. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kees Cook <keescook@chromium.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-media@vger.kernel.org Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-10-daniel.vetter@ffwll.ch
2020-09-07/dev/zero: fixups for ->readChristoph Hellwig
Reported the cleared bytes in case of a partial clear_user instead of -EFAULT, and remove a pointless conditional, as cleared must be non-zero by the time we hit the signal_pending check. Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200907082700.2057137-1-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-03/dev/zero: also implement ->readChristoph Hellwig
Christophe reported a major speedup due to avoiding the iov_iter overhead, so just add this trivial function. Note that /dev/zero already implements both an iter and non-iter writes so this just makes it more symmetric. Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200903155922.1111551-1-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-23/dev/mem: Add missing memory barriers for devmem_inodeEric Biggers
WRITE_ONCE() isn't the correct way to publish a pointer to a data structure, since it doesn't include a write memory barrier. Therefore other tasks may see that the pointer has been set but not see that the pointed-to memory has finished being initialized yet. Instead a primitive with "release" semantics is needed. Use smp_store_release() for this. The use of READ_ONCE() on the read side is still potentially correct if there's no control dependency, i.e. if all memory being "published" is transitively reachable via the pointer itself. But this pairing is somewhat confusing and error-prone. So just upgrade the read side to smp_load_acquire() so that it clearly pairs with smp_store_release(). Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: 3234ac664a87 ("/dev/mem: Revoke mappings when a driver claims the region") Signed-off-by: Eric Biggers <ebiggers@google.com> Cc: stable <stable@vger.kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20200716060553.24618-1-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-17maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofaultChristoph Hellwig
Better describe what these functions do. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-27/dev/mem: Revoke mappings when a driver claims the regionDan Williams
Close the hole of holding a mapping over kernel driver takeover event of a given address range. Commit 90a545e98126 ("restrict /dev/mem to idle io memory ranges") introduced CONFIG_IO_STRICT_DEVMEM with the goal of protecting the kernel against scenarios where a /dev/mem user tramples memory that a kernel driver owns. However, this protection only prevents *new* read(), write() and mmap() requests. Established mappings prior to the driver calling request_mem_region() are left alone. Especially with persistent memory, and the core kernel metadata that is stored there, there are plentiful scenarios for a /dev/mem user to violate the expectations of the driver and cause amplified damage. Teach request_mem_region() to find and shoot down active /dev/mem mappings that it believes it has successfully claimed for the exclusive use of the driver. Effectively a driver call to request_mem_region() becomes a hole-punch on the /dev/mem device. The typical usage of unmap_mapping_range() is part of truncate_pagecache() to punch a hole in a file, but in this case the implementation is only doing the "first half" of a hole punch. Namely it is just evacuating current established mappings of the "hole", and it relies on the fact that /dev/mem establishes mappings in terms of absolute physical address offsets. Once existing mmap users are invalidated they can attempt to re-establish the mapping, or attempt to continue issuing read(2) / write(2) to the invalidated extent, but they will then be subject to the CONFIG_IO_STRICT_DEVMEM checking that can block those subsequent accesses. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: 90a545e98126 ("restrict /dev/mem to idle io memory ranges") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/159009507306.847224.8502634072429766747.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-28Merge branch 'next-lockdown' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull kernel lockdown mode from James Morris: "This is the latest iteration of the kernel lockdown patchset, from Matthew Garrett, David Howells and others. From the original description: This patchset introduces an optional kernel lockdown feature, intended to strengthen the boundary between UID 0 and the kernel. When enabled, various pieces of kernel functionality are restricted. Applications that rely on low-level access to either hardware or the kernel may cease working as a result - therefore this should not be enabled without appropriate evaluation beforehand. The majority of mainstream distributions have been carrying variants of this patchset for many years now, so there's value in providing a doesn't meet every distribution requirement, but gets us much closer to not requiring external patches. There are two major changes since this was last proposed for mainline: - Separating lockdown from EFI secure boot. Background discussion is covered here: https://lwn.net/Articles/751061/ - Implementation as an LSM, with a default stackable lockdown LSM module. This allows the lockdown feature to be policy-driven, rather than encoding an implicit policy within the mechanism. The new locked_down LSM hook is provided to allow LSMs to make a policy decision around whether kernel functionality that would allow tampering with or examining the runtime state of the kernel should be permitted. The included lockdown LSM provides an implementation with a simple policy intended for general purpose use. This policy provides a coarse level of granularity, controllable via the kernel command line: lockdown={integrity|confidentiality} Enable the kernel lockdown feature. If set to integrity, kernel features that allow userland to modify the running kernel are disabled. If set to confidentiality, kernel features that allow userland to extract confidential information from the kernel are also disabled. This may also be controlled via /sys/kernel/security/lockdown and overriden by kernel configuration. New or existing LSMs may implement finer-grained controls of the lockdown features. Refer to the lockdown_reason documentation in include/linux/security.h for details. The lockdown feature has had signficant design feedback and review across many subsystems. This code has been in linux-next for some weeks, with a few fixes applied along the way. Stephen Rothwell noted that commit 9d1f8be5cf42 ("bpf: Restrict bpf when kernel lockdown is in confidentiality mode") is missing a Signed-off-by from its author. Matthew responded that he is providing this under category (c) of the DCO" * 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits) kexec: Fix file verification on S390 security: constify some arrays in lockdown LSM lockdown: Print current->comm in restriction messages efi: Restrict efivar_ssdt_load when the kernel is locked down tracefs: Restrict tracefs when the kernel is locked down debugfs: Restrict debugfs when the kernel is locked down kexec: Allow kexec_file() with appropriate IMA policy when locked down lockdown: Lock down perf when in confidentiality mode bpf: Restrict bpf when kernel lockdown is in confidentiality mode lockdown: Lock down tracing and perf kprobes when in confidentiality mode lockdown: Lock down /proc/kcore x86/mmiotrace: Lock down the testmmiotrace module lockdown: Lock down module params that specify hardware parameters (eg. ioport) lockdown: Lock down TIOCSSERIAL lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down acpi: Disable ACPI table override if the kernel is locked down acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down ACPI: Limit access to custom_method when the kernel is locked down x86/msr: Restrict MSR access when the kernel is locked down x86: Lock down IO port access when the kernel is locked down ...
2019-09-04/dev/mem: Bail out upon SIGKILL.Tetsuo Handa
syzbot found that a thread can stall for minutes inside read_mem() or write_mem() after that thread was killed by SIGKILL [1]. Reading from iomem areas of /dev/mem can be slow, depending on the hardware. While reading 2GB at one read() is legal, delaying termination of killed thread for minutes is bad. Thus, allow reading/writing /dev/mem and /dev/kmem to be preemptible and killable. [ 1335.912419][T20577] read_mem: sz=4096 count=2134565632 [ 1335.943194][T20577] read_mem: sz=4096 count=2134561536 [ 1335.978280][T20577] read_mem: sz=4096 count=2134557440 [ 1336.011147][T20577] read_mem: sz=4096 count=2134553344 [ 1336.041897][T20577] read_mem: sz=4096 count=2134549248 Theoretically, reading/writing /dev/mem and /dev/kmem can become "interruptible". But this patch chose "killable". Future patch will make them "interruptible" so that we can revert to "killable" if some program regressed. [1] https://syzkaller.appspot.com/bug?id=a0e3436829698d5824231251fad9d8e998f94f5e Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@vger.kernel.org> Reported-by: syzbot <syzbot+8ab2d0f39fb79fe6ca40@syzkaller.appspotmail.com> Link: https://lore.kernel.org/r/1566825205-10703-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-19lockdown: Restrict /dev/{mem,kmem,port} when the kernel is locked downMatthew Garrett
Allowing users to read and write to core kernel memory makes it possible for the kernel to be subverted, avoiding module loading restrictions, and also to steal cryptographic information. Disallow /dev/mem and /dev/kmem from being opened this when the kernel has been locked down to prevent this. Also disallow /dev/port from being opened to prevent raw ioport access and thus DMA from being used to accomplish the same thing. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Garrett <mjg59@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: x86@kernel.org Signed-off-by: James Morris <jmorris@namei.org>
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-07-26mm: fix vma_is_anonymous() false-positivesKirill A. Shutemov
vma_is_anonymous() relies on ->vm_ops being NULL to detect anonymous VMA. This is unreliable as ->mmap may not set ->vm_ops. False-positive vma_is_anonymous() may lead to crashes: next ffff8801ce5e7040 prev ffff8801d20eca50 mm ffff88019c1e13c0 prot 27 anon_vma ffff88019680cdd8 vm_ops 0000000000000000 pgoff 0 file ffff8801b2ec2d00 private_data 0000000000000000 flags: 0xff(read|write|exec|shared|mayread|maywrite|mayexec|mayshare) ------------[ cut here ]------------ kernel BUG at mm/memory.c:1422! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 18486 Comm: syz-executor3 Not tainted 4.18.0-rc3+ #136 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:zap_pmd_range mm/memory.c:1421 [inline] RIP: 0010:zap_pud_range mm/memory.c:1466 [inline] RIP: 0010:zap_p4d_range mm/memory.c:1487 [inline] RIP: 0010:unmap_page_range+0x1c18/0x2220 mm/memory.c:1508 Call Trace: unmap_single_vma+0x1a0/0x310 mm/memory.c:1553 zap_page_range_single+0x3cc/0x580 mm/memory.c:1644 unmap_mapping_range_vma mm/memory.c:2792 [inline] unmap_mapping_range_tree mm/memory.c:2813 [inline] unmap_mapping_pages+0x3a7/0x5b0 mm/memory.c:2845 unmap_mapping_range+0x48/0x60 mm/memory.c:2880 truncate_pagecache+0x54/0x90 mm/truncate.c:800 truncate_setsize+0x70/0xb0 mm/truncate.c:826 simple_setattr+0xe9/0x110 fs/libfs.c:409 notify_change+0xf13/0x10f0 fs/attr.c:335 do_truncate+0x1ac/0x2b0 fs/open.c:63 do_sys_ftruncate+0x492/0x560 fs/open.c:205 __do_sys_ftruncate fs/open.c:215 [inline] __se_sys_ftruncate fs/open.c:213 [inline] __x64_sys_ftruncate+0x59/0x80 fs/open.c:213 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reproducer: #include <stdio.h> #include <stddef.h> #include <stdint.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <sys/mman.h> #include <unistd.h> #include <fcntl.h> #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long) #define KCOV_ENABLE _IO('c', 100) #define KCOV_DISABLE _IO('c', 101) #define COVER_SIZE (1024<<10) #define KCOV_TRACE_PC 0 #define KCOV_TRACE_CMP 1 int main(int argc, char **argv) { int fd; unsigned long *cover; system("mount -t debugfs none /sys/kernel/debug"); fd = open("/sys/kernel/debug/kcov", O_RDWR); ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); munmap(cover, COVER_SIZE * sizeof(unsigned long)); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); memset(cover, 0, COVER_SIZE * sizeof(unsigned long)); ftruncate(fd, 3UL << 20); return 0; } This can be fixed by assigning anonymous VMAs own vm_ops and not relying on it being NULL. If ->mmap() failed to set ->vm_ops, mmap_region() will set it to dummy_vm_ops. This way we will have non-NULL ->vm_ops for all VMAs. Link: http://lkml.kernel.org/r/20180724121139.62570-4-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: syzbot+3f84280d52be9b7083cc@syzkaller.appspotmail.com Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-07/dev/mem: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-28/dev/mem: Avoid overwriting "err" in read_mem()Kees Cook
Successes in probe_kernel_read() would mask failures in copy_to_user() during read_mem(). Reported-by: Brad Spengler <spender@grsecurity.net> Fixes: 22ec1a2aea73 ("/dev/mem: Add bounce buffer for copy-out") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-18/dev/mem: Add bounce buffer for copy-outKees Cook
As done for /proc/kcore in commit df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext data") this adds a bounce buffer when reading memory via /dev/mem. This is needed to allow kernel text memory to be read out when built with CONFIG_HARDENED_USERCOPY (which refuses to read out kernel text) and without CONFIG_STRICT_DEVMEM (which would have refused to read any RAM contents at all). Since this build configuration isn't common (most systems with CONFIG_HARDENED_USERCOPY also have CONFIG_STRICT_DEVMEM), this also tries to inform Kconfig about the recommended settings. This patch is modified from Brad Spengler/PaX Team's changes to /dev/mem code in the last public patch of grsecurity/PaX based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. Reported-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Fixes: f5509cc18daa ("mm: Hardened usercopy") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-16x86/mm: Limit mmap() of /dev/mem to valid physical addressesCraig Bergstrom
One thing /dev/mem access APIs should verify is that there's no way that excessively large pfn's can leak into the high bits of the page table entry. In particular, if people can use "very large physical page addresses" through /dev/mem to set the bits past bit 58 - SOFTW4 and permission key bits and NX bit, that could *really* confuse the kernel. We had an earlier attempt: ce56a86e2ade ("x86/mm: Limit mmap() of /dev/mem to valid physical addresses") ... which turned out to be too restrictive (breaking mem=... bootups for example) and had to be reverted in: 90edaac62729 ("Revert "x86/mm: Limit mmap() of /dev/mem to valid physical addresses"") This v2 attempt modifies the original patch and makes sure that mmap(/dev/mem) limits the pfns so that it at least fits in the actual pteval_t architecturally: - Make sure mmap_mem() actually validates that the offset fits in phys_addr_t ( This may be indirectly true due to some other check, but it's not entirely obvious. ) - Change valid_mmap_phys_addr_range() to just use phys_addr_valid() on the top byte ( Top byte is sufficient, because mmap_mem() has already checked that it cannot wrap. ) - Add a few comments about what the valid_phys_addr_range() vs. valid_mmap_phys_addr_range() difference is. Signed-off-by: Craig Bergstrom <craigb@google.com> [ Fixed the checks and added comments. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [ Collected the discussion and patches into a commit. ] Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: Sean Young <sean@mess.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/CA+55aFyEcOMb657vWSmrM13OxmHxC-XxeBmNis=DwVvpJUOogQ@mail.gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03drivers: char: mem: Fix wraparound check to allow mappings up to the endJulius Werner
A recent fix to /dev/mem prevents mappings from wrapping around the end of physical address space. However, the check was written in a way that also prevents a mapping reaching just up to the end of physical address space, which may be a valid use case (especially on 32-bit systems). This patch fixes it by checking the last mapped address (instead of the first address behind that) for overflow. Fixes: b299cde245 ("drivers: char: mem: Check for address space wraparound with mmap()") Cc: <stable@vger.kernel.org> Reported-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18drivers: char: mem: Check for address space wraparound with mmap()Julius Werner
/dev/mem currently allows mmap() mappings that wrap around the end of the physical address space, which should probably be illegal. It circumvents the existing STRICT_DEVMEM permission check because the loop immediately terminates (as the start address is already higher than the end address). On the x86_64 architecture it will then cause a panic (from the BUG(start >= end) in arch/x86/mm/pat.c:reserve_memtype()). This patch adds an explicit check to make sure offset + size will not wrap around in the physical address type. Signed-off-by: Julius Werner <jwerner@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-12mm: Tighten x86 /dev/mem with zeroing readsKees Cook
Under CONFIG_STRICT_DEVMEM, reading System RAM through /dev/mem is disallowed. However, on x86, the first 1MB was always allowed for BIOS and similar things, regardless of it actually being System RAM. It was possible for heap to end up getting allocated in low 1MB RAM, and then read by things like x86info or dd, which would trip hardened usercopy: usercopy: kernel memory exposure attempt detected from ffff880000090000 (dma-kmalloc-256) (4096 bytes) This changes the x86 exception for the low 1MB by reading back zeros for System RAM areas instead of blindly allowing them. More work is needed to extend this to mmap, but currently mmap doesn't go through usercopy, so hardened usercopy won't Oops the kernel. Reported-by: Tommi Rantala <tommi.t.rantala@nokia.com> Tested-by: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-01-11drivers: char: mem: Fix thinkos in kmem address checksRobin Murphy
When borrowing the pfn_valid() check from mmap_kmem(), somebody managed to get physical and virtual addresses spectacularly muddled up, such that we've ended up with checks for one being the other. Whilst this does indeed prevent out-of-bounds accesses crashing, on most systems it also prevents the more desirable use-case of working at all ever. Check the *virtual* offset correctly for what it is. Furthermore, do so in the right place - a read or write may span multiple pages, so a single up-front check is insufficient. High memory accesses already have a similar validity check just before the copy_to_user() call, so just make the low memory path fully consistent with that. Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> CC: stable@vger.kernel.org Fixes: 148a1bc84398 ("drivers: char: mem: Check {read,write}_kmem() addresses") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31drivers: char: mem: Check {read,write}_kmem() addressesRobin Murphy
Arriving at read_kmem() with an offset representing a bogus kernel address (e.g. 0 from a simple "cat /dev/kmem") leads to copy_to_user faulting on the kernel-side read. x86_64 happens to get away with this since the optimised implementation uses "rep movs*", thus the user write (which is allowed to fault) and the kernel read are the same instruction, the kernel-side fault falls into the user-side fixup handler and the chain of events which transpires ends up returning an error as one might expect, even if it's an inappropriate -EFAULT. On other architectures, though, the read is not covered by the fixup entry for the write, and we get a big scary "Unable to hande kernel paging request..." dump. The more typical use-case of mmap_kmem() has always (within living memory at least) returned -EIO for addresses which don't satisfy pfn_valid(), so let's make that consistent across {read,write}_kem() too. Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-26shmem: get_unmapped_area align huge pageHugh Dickins
Provide a shmem_get_unmapped_area method in file_operations, called at mmap time to decide the mapping address. It could be conditional on CONFIG_TRANSPARENT_HUGEPAGE, but save #ifdefs in other places by making it unconditional. shmem_get_unmapped_area() first calls the usual mm->get_unmapped_area (which we treat as a black box, highly dependent on architecture and config and executable layout). Lots of conditions, and in most cases it just goes with the address that chose; but when our huge stars are rightly aligned, yet that did not provide a suitable address, go back to ask for a larger arena, within which to align the mapping suitably. There have to be some direct calls to shmem_get_unmapped_area(), not via the file_operations: because of the way shmem_zero_setup() is called to create a shmem object late in the mmap sequence, when MAP_SHARED is requested with MAP_ANONYMOUS or /dev/zero. Though this only matters when /proc/sys/vm/shmem_huge has been set. Link: http://lkml.kernel.org/r/1466021202-61880-29-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-08x86/mm/pat, /dev/mem: Remove superfluous error messageJiri Kosina
Currently it's possible for broken (or malicious) userspace to flood a kernel log indefinitely with messages a-la Program dmidecode tried to access /dev/mem between f0000->100000 because range_is_allowed() is case of CONFIG_STRICT_DEVMEM being turned on dumps this information each and every time devmem_is_allowed() fails. Reportedly userspace that is able to trigger contignuous flow of these messages exists. It would be possible to rate limit this message, but that'd have a questionable value; the administrator wouldn't get information about all the failing accessess, so then the information would be both superfluous and incomplete at the same time :) Returning EPERM (which is what is actually happening) is enough indication for userspace what has happened; no need to log this particular error as some sort of special condition. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1607081137020.24757@cbobk.fhfr.pm Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-05drivers: char: mem: fix IS_ERROR_VALUE usageAndrzej Hajda
IS_ERR_VALUE macro should be used only with unsigned long type. Specifically it works incorrectly with longer types. The patch follows conclusion from discussion on LKML [1][2]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2120927 [2]: http://permalink.gmane.org/gmane.linux.kernel/2150581 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-22wrappers for ->i_mutex accessAl Viro
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11switch drivers/char/mem.c to ->read_iter/->write_iterAl Viro
Note that _these_ guys have ->read() and ->write() left in place - they are eqiuvalent to what we'd get if we replaced those with NULL, but we are talking about hot paths here. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11make new_sync_{read,write}() staticAl Viro
All places outside of core VFS that checked ->read and ->write for being NULL or called the methods directly are gone now, so NULL {read,write} with non-NULL {read,write}_iter will do the right thing in all cases. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-25fs: move struct kiocb to fs.hChristoph Hellwig
struct kiocb now is a generic I/O container, so move it to fs.h. Also do a #include diet for aio.h while we're at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-15Merge tag 'char-misc-3.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc patches from Greg KH: "Here's the big char/misc driver update for 3.20-rc1. Lots of little things in here, all described in the changelog. Nothing major or unusual, except maybe the binder selinux stuff, which was all acked by the proper selinux people and they thought it best to come through this tree. All of this has been in linux-next with no reported issues for a while" * tag 'char-misc-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) coresight: fix function etm_writel_cp14() parameter order coresight-etm: remove check for unknown Kconfig macro coresight: fixing CPU hwid lookup in device tree coresight: remove the unnecessary function coresight_is_bit_set() coresight: fix the debug AMBA bus name coresight: remove the extra spaces coresight: fix the link between orphan connection and newly added device coresight: remove the unnecessary replicator property coresight: fix the replicator subtype value pdfdocs: Fix 'make pdfdocs' failure for 'uio-howto.tmpl' mcb: Fix error path of mcb_pci_probe virtio/console: verify device has config space ti-st: clean up data types (fix harmless memory corruption) mei: me: release hw from reset only during the reset flow mei: mask interrupt set bit on clean reset bit extcon: max77693: Constify struct regmap_config extcon: adc-jack: Release IIO channel on driver remove extcon: Remove duplicated include from extcon-class.c Drivers: hv: vmbus: hv_process_timer_expiration() can be static Drivers: hv: vmbus: serialize Offer and Rescind offer ...
2015-01-20fs: introduce f_op->mmap_capabilities for nommu mmap supportChristoph Hellwig
Since "BDI: Provide backing device capability information [try #3]" the backing_dev_info structure also provides flags for the kind of mmap operation available in a nommu environment, which is entirely unrelated to it's original purpose. Introduce a new nommu-only file operation to provide this information to the nommu mmap code instead. Splitting this from the backing_dev_info structure allows to remove lots of backing_dev_info instance that aren't otherwise needed, and entirely gets rid of the concept of providing a backing_dev_info for a character device. It also removes the need for the mtd_inodefs filesystem. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Tejun Heo <tj@kernel.org> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-12drivers: char: mem: Fix Missing blank line issuesRob Ward
Fixes "Missing a blank line after declarations" reported by checkpatch. This patch introduces no functional changes. Signed-off-by: Rob Ward <robert.ward114@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12drivers: char: mem: Replace usage of asm includeRob Ward
Replaces the use of asm/uaccess.h with linux/uaccess.h. Signed-off-by: Rob Ward <robert.ward114@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12drivers: char: mem: Simplify DEVPORT configurationRob Ward
Simplify the use of CONFIG_DEVPORT by making the port_fops so that it includes __maybe_unused. This enabled the multiple #ifdef's used for this structure to be removed and brings it in line with the use of CONFIG_DEVMEM This change should introduce no functional changes. Signed-off-by: Rob Ward <robert.ward114@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12drivers: char: mem: Simplify DEVKMEM configurationRob Ward
Simplify the use of CONFIG_DEVKMEM by making the kmem_fops so that it is __maybe_unused. This enabled the multiple #ifdef's used for this structure to be removed and brings it in line with the use of CONFIG_DEVMEM This change should introduce no functional changes. Signed-off-by: Rob Ward <robert.ward114@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12drivers: char: mem: Make /dev/mem an optional deviceRob Ward
Adds Kconfig option CONFIG_DEVMEM that allows the /dev/mem device to be disabled. Option defaults to /dev/mem enabled. Signed-off-by: Rob Ward <robert.ward114@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-10/dev/mem: Use more consistent data typesThierry Reding
The xlate_dev_{kmem,mem}_ptr() functions take either a physical address or a kernel virtual address, so data types should be phys_addr_t and void *. They both return a kernel virtual address which is only ever used in calls to copy_{from,to}_user(), so make variables that store it void * rather than char * for consistency. Also only define a weak unxlate_dev_mem_ptr() function if architectures haven't overridden them in the asm/io.h header file. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-10-09switch /dev/zero and /dev/full to ->read_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-02-15/dev/mem: handle out-of-bounds read/writePetr Tesarik
The loff_t type may be wider than phys_addr_t (e.g. on 32-bit systems). Consequently, the file offset may be truncated in the assignment. Currently, /dev/mem wraps around, which may cause applications to read or write incorrect regions of memory by accident. Let's follow POSIX file semantics here and return 0 when reading from and -EFBIG when writing to an offset that cannot be represented by a phys_addr_t. Note that the conditional is optimized out by the compiler if loff_t has the same size as phys_addr_t. Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-21mm/memblock: remove unnecessary inclusions of bootmem.hGrygorii Strashko
Clean-up to remove depedency with bootmem headers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03/dev/oldmem: Remove the interfaceZhang Yanfei
/dev/oldmem provides the interface for us to access the "old memory" in the dump-capture kernel. Unfortunately, no one actually uses this interface. And this interface could actually cause some real problems if used on ia64 where the cached/uncached accesses are mixed. See the discussion from the link: https://lkml.org/lkml/2013/4/12/386. So Eric suggested that we should remove /dev/oldmem as an unused piece of code. [akpm@linux-foundation.org: mention /dev/oldmem obsolescence in devices.txt] Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Dave Hansen <dave@sr71.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-06drivers: char: mem: use IS_ERR_VALUE() in memory_lseek()Rasmus Villemoes
Use IS_ERR_VALUE() instead of comparing the new offset to a hard-coded value of -MAX_ERRNO (which is also off-by-one due to the use of ~ instead of -). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07aio: don't include aio.h in sched.hKent Overstreet
Faster kernel compiles by way of fewer unnecessary includes. [akpm@linux-foundation.org: fix fallout] [akpm@linux-foundation.org: fix build] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>