summaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)Author
2018-02-01Merge tag 'char-misc-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big pull request for char/misc drivers for 4.16-rc1. There's a lot of stuff in here. Three new driver subsystems were added for various types of hardware busses: - siox - slimbus - soundwire as well as a new vboxguest subsystem for the VirtualBox hypervisor drivers. There's also big updates from the FPGA subsystem, lots of Android binder fixes, the usual handful of hyper-v updates, and lots of other smaller driver updates. All of these have been in linux-next for a long time, with no reported issues" * tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (155 commits) char: lp: use true or false for boolean values android: binder: use VM_ALLOC to get vm area android: binder: Use true and false for boolean values lkdtm: fix handle_irq_event symbol for INT_HW_IRQ_EN EISA: Delete error message for a failed memory allocation in eisa_probe() EISA: Whitespace cleanup misc: remove AVR32 dependencies virt: vbox: Add error mapping for VERR_INVALID_NAME and VERR_NO_MORE_FILES soundwire: Fix a signedness bug uio_hv_generic: fix new type mismatch warnings uio_hv_generic: fix type mismatch warnings auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE uio_hv_generic: add rescind support uio_hv_generic: check that host supports monitor page uio_hv_generic: create send and receive buffers uio: document uio_hv_generic regions doc: fix documentation about uio_hv_generic vmbus: add monitor_id and subchannel_id to sysfs per channel vmbus: fix ABI documentation uio_hv_generic: use ISR callback method ...
2018-02-01Merge tag 'driver-core-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of "big" driver core patches for 4.16-rc1. The majority of the work here is in the firmware subsystem, with reworks to try to attempt to make the code easier to handle in the long run, but no functional change. There's also some tree-wide sysfs attribute fixups with lots of acks from the various subsystem maintainers, as well as a handful of other normal fixes and changes. And finally, some license cleanups for the driver core and sysfs code. All have been in linux-next for a while with no reported issues" * tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits) device property: Define type of PROPERTY_ENRTY_*() macros device property: Reuse property_entry_free_data() device property: Move property_entry_free_data() upper firmware: Fix up docs referring to FIRMWARE_IN_KERNEL firmware: Drop FIRMWARE_IN_KERNEL Kconfig option USB: serial: keyspan: Drop firmware Kconfig options sysfs: remove DEBUG defines sysfs: use SPDX identifiers drivers: base: add coredump driver ops sysfs: add attribute specification for /sysfs/devices/.../coredump test_firmware: fix missing unlock on error in config_num_requests_store() test_firmware: make local symbol test_fw_config static sysfs: turn WARN() into pr_warn() firmware: Fix a typo in fallback-mechanisms.rst treewide: Use DEVICE_ATTR_WO treewide: Use DEVICE_ATTR_RO treewide: Use DEVICE_ATTR_RW sysfs.h: Use octal permissions component: add debugfs support bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate ...
2018-01-31Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Enforce the setting of keys for keyed aead/hash/skcipher algorithms. - Add multibuf speed tests in tcrypt. Algorithms: - Improve performance of sha3-generic. - Add native sha512 support on arm64. - Add v8.2 Crypto Extentions version of sha3/sm3 on arm64. - Avoid hmac nesting by requiring underlying algorithm to be unkeyed. - Add cryptd_max_cpu_qlen module parameter to cryptd. Drivers: - Add support for EIP97 engine in inside-secure. - Add inline IPsec support to chelsio. - Add RevB core support to crypto4xx. - Fix AEAD ICV check in crypto4xx. - Add stm32 crypto driver. - Add support for BCM63xx platforms in bcm2835 and remove bcm63xx. - Add Derived Key Protocol (DKP) support in caam. - Add Samsung Exynos True RNG driver. - Add support for Exynos5250+ SoCs in exynos PRNG driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (166 commits) crypto: picoxcell - Fix error handling in spacc_probe() crypto: arm64/sha512 - fix/improve new v8.2 Crypto Extensions code crypto: arm64/sm3 - new v8.2 Crypto Extensions implementation crypto: arm64/sha3 - new v8.2 Crypto Extensions implementation crypto: testmgr - add new testcases for sha3 crypto: sha3-generic - export init/update/final routines crypto: sha3-generic - simplify code crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize crypto: sha3-generic - fixes for alignment and big endian operation crypto: aesni - handle zero length dst buffer crypto: artpec6 - remove select on non-existing CRYPTO_SHA384 hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe() crypto: stm32 - remove redundant dev_err call in stm32_cryp_probe() crypto: axis - remove unnecessary platform_get_resource() error check crypto: testmgr - test misuse of result in ahash crypto: inside-secure - make function safexcel_try_push_requests static crypto: aes-generic - fix aes-generic regression on powerpc crypto: chelsio - Fix indentation warning crypto: arm64/sha1-ce - get rid of literal pool crypto: arm64/sha2-ce - move the round constant table to .rodata section ...
2018-01-31Merge branch 'next-tpm' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull tpm updates from James Morris: - reduce polling delays in tpm_tis - support retrieving TPM 2.0 Event Log through EFI before ExitBootServices - replace tpm-rng.c with a hwrng device managed by the driver for each TPM device - TPM resource manager synthesizes TPM_RC_COMMAND_CODE response instead of returning -EINVAL for unknown TPM commands. This makes user space more sound. - CLKRUN fixes: * Keep #CLKRUN disable through the entier TPM command/response flow * Check whether #CLKRUN is enabled before disabling and enabling it again because enabling it breaks PS/2 devices on a system where it is disabled * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: remove unused variables tpm: remove unused data fields from I2C and OF device ID tables tpm: only attempt to disable the LPC CLKRUN if is already enabled tpm: follow coding style for variable declaration in tpm_tis_core_init() tpm: delete the TPM_TIS_CLK_ENABLE flag tpm: Update MAINTAINERS for Jason Gunthorpe tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd() tpm_tis: Move ilb_base_addr to tpm_tis_data tpm2-cmd: allow more attempts for selftest execution tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented tpm: Move Linux RNG connection to hwrng tpm: use struct tpm_chip for tpm_chip_find_get() tpm: parse TPM event logs based on EFI table efi: call get_event_log before ExitBootServices tpm: add event log format version tpm: rename event log provider files tpm: move tpm_eventlog.h outside of drivers folder tpm: use tpm_msleep() value as max delay tpm: reduce tpm polling delay in tpm_tis_core tpm: move wait_for_tpm_stat() to respective driver files
2018-01-31Merge tag 'for-linus-4.16-1' of git://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI updates from Corey Minyard: "Small fixes for various things, been sitting in next for a while (some a long time)" * tag 'for-linus-4.16-1' of git://github.com/cminyard/linux-ipmi: ipmi_ssif: Remove duplicate NULL check ipmi/powernv: Fix error return code in ipmi_powernv_probe() ipmi: use dynamic memory for DMI driver override ipmi/ipmi_powernv: remove outdated todo in powernv IPMI driver ipmi: Clear smi_info->thread to prevent use-after-free during module unload ipmi: use correct string length ipmi_si: Fix error handling of platform device ipmi watchdog: fix typo in parameter description ipmi_si_platform: Fix typo in parameter description
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-26hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe()weiyongjun \(A\)
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Eric Anholt <eric@anholt.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-25char: lp: use true or false for boolean valuesGustavo A. R. Silva
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-22ipmi_ssif: Remove duplicate NULL checkAndy Shevchenko
Since i2c_unregister_device() became NULL-aware we may remove duplicate NULL check. Cc: Corey Minyard <minyard@acm.org> Cc: openipmi-developer@lists.sourceforge.net Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-01-22ipmi/powernv: Fix error return code in ipmi_powernv_probe()Wei Yongjun
Fix to return a negative error code from the request_irq() error handling case instead of 0, as done elsewhere in this function. Fixes: dce143c3381c ("ipmi/powernv: Convert to irq event interface") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-01-22ipmi: use dynamic memory for DMI driver overrideJohn Garry
Currently a crash can be seen if we reach the "err" label in dmi_add_platform_ipmi(), calling platform_device_put(), like here: [ 7.270584] (null): ipmi:dmi: Unable to add resources: -16 [ 7.330229] ------------[ cut here ]------------ [ 7.334889] kernel BUG at mm/slub.c:3894! [ 7.338936] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.344475] Modules linked in: [ 7.347556] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-00004-gbe9cb7b-dirty #114 [ 7.355907] Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT17 Nemo 2.0 RC0 11/29/2017 [ 7.365137] task: 00000000c211f6d3 task.stack: 00000000f276e9af [ 7.371116] pstate: 60000005 (nZCv daif -PAN -UAO) [ 7.375957] pc : kfree+0x194/0x1b4 [ 7.379389] lr : platform_device_release+0xcc/0xd8 [ 7.384225] sp : ffff0000092dba90 [ 7.387567] x29: ffff0000092dba90 x28: ffff000008a83000 [ 7.392933] x27: ffff0000092dbc10 x26: 00000000000000e6 [ 7.398297] x25: 0000000000000003 x24: ffff0000085b51e8 [ 7.403662] x23: 0000000000000100 x22: ffff7e0000234cc0 [ 7.409027] x21: ffff000008af3660 x20: ffff8017d21acc10 [ 7.414392] x19: ffff8017d21acc00 x18: 0000000000000002 [ 7.419757] x17: 0000000000000001 x16: 0000000000000008 [ 7.425121] x15: 0000000000000001 x14: 6666666678303d65 [ 7.430486] x13: 6469727265766f5f x12: 7265766972642e76 [ 7.435850] x11: 6564703e2d617020 x10: 6530326435373638 [ 7.441215] x9 : 3030303030303030 x8 : 3d76656420657361 [ 7.446580] x7 : ffff000008f59df8 x6 : ffff8017fbe0ea50 [ 7.451945] x5 : 0000000000000000 x4 : 0000000000000000 [ 7.457309] x3 : ffffffffffffffff x2 : 0000000000000000 [ 7.462674] x1 : 0fffc00000000800 x0 : ffff7e0000234ce0 [ 7.468039] Process swapper/0 (pid: 1, stack limit = 0x00000000f276e9af) [ 7.474809] Call trace: [ 7.477272] kfree+0x194/0x1b4 [ 7.480351] platform_device_release+0xcc/0xd8 [ 7.484837] device_release+0x34/0x90 [ 7.488531] kobject_put+0x70/0xcc [ 7.491961] put_device+0x14/0x1c [ 7.495304] platform_device_put+0x14/0x1c [ 7.499439] dmi_add_platform_ipmi+0x348/0x3ac [ 7.503923] scan_for_dmi_ipmi+0xfc/0x10c [ 7.507970] do_one_initcall+0x38/0x124 [ 7.511840] kernel_init_freeable+0x188/0x228 [ 7.516238] kernel_init+0x10/0x100 [ 7.519756] ret_from_fork+0x10/0x18 [ 7.523362] Code: f94002c0 37780080 f94012c0 37000040 (d4210000) [ 7.529552] ---[ end trace 11750e4787deef9e ]--- [ 7.534228] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 7.534228] This is because when the device is released in platform_device_release(), we try to free pdev.driver_override. This is a const string, hence the crash. Fix by using dynamic memory for pdev->driver_override. Signed-off-by: John Garry <john.garry@huawei.com> [Removed the free of driver_override from ipmi_si_remove_by_dev(). The free is done in platform_device_release(), and would result in a double free, and ipmi_si_remove_by_dev() is called by non-platform devices.] Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: <stable@vger.kernel.org> # 4.14+
2018-01-18hwrng: imx-rngc - simplify the power management definitionsMartin Kaiser
Use the SIMPLE_DEV_PM_OPS() macro instead of populating a struct dev_pm_ops directly. The suspend and resume functions will now be used for both hibernation and suspend to ram. If power management is disabled, SIMPLE_DEV_PM_OPS() evaluates to nothing, The two functions won't be used and won't be included in the kernel. Mark them as __maybe_unused to clarify that this is intended behaviour. With these modifications in place, we don't need the #ifdefs for power management any more. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-18hwrng: exynos - remove redundant dev_err call in exynos_trng_probe()weiyongjun \(A\)
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-18hwrng: exynos - Signedness bug in exynos_trng_do_read()Dan Carpenter
"val" needs to be signed for the error handling to work. Fixes: 6cd225cc5d8a ("hwrng: exynos - add Samsung Exynos True RNG driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-18hwrng: mediatek - Setup default RNG qualitySean Wang
When hw_random device's quality is non-zero, it will automatically fill the kernel's entropy pool at boot. For the purpose, one conservative quality value is being picked up as the default value. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-16ipmi/ipmi_powernv: remove outdated todo in powernv IPMI driverJeremy Kerr
Since the IPMI core now queries device IDs dynamically, we no longer need this todo for implementing this in the powernv driver. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-01-15ipmi: Clear smi_info->thread to prevent use-after-free during module unloadMasamitsu Yamazaki
During code inspection, I found an use-after-free possibility during unloading ipmi_si in the polling mode. If start_new_msg() is called after kthread_stop(), the function will try to wake up non-existing kthread using the dangling pointer. Possible scenario is when a new internal message is generated after ipmi_unregister_smi()[*1] and remains after stop_timer_and_thread() in clenaup_one_si() [*2]. Use-after-free could occur as follows depending on BMC replies. cleanup_one_si => ipmi_unregister_smi [*1] => stop_timer_and_thread => kthread_stop(smi_info->thread) [*2] => poll => smi_event_handler => start_new_msg => if (smi_info->thread) wake_up_process(smi_info->thread) <== use-after-free!! Although currently it seems no such message is generated in the polling mode, some changes might introduce that in thefuture. For example in the interrupt mode, disable_si_irq() does that at [*2]. So let's prevent such a critical issue possibility now. Signed-off-by: Yamazaki Masamitsu <m-yamazaki@ah.jp.nec.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-01-09char: xillybus: remove direct dependency on DT functionsRob Herring
Drivers generally should not need to depend directly on OF_ADDRESS or OF_IRQ. Convert xillybus to use the preferred platform_get_resource() and platform_get_irq() functions to remove this dependency. Cc: Eli Billauer <eli.billauer@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09treewide: Use DEVICE_ATTR_ROJoe Perches
Convert DEVICE_ATTR uses to DEVICE_ATTR_RO where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(?:\s*S_IRUGO\s*|\s*0444\s*)\)?\s*,\s*\1_show\s*,\s*NULL\s*\)/DEVICE_ATTR_RO(\1)/g; print;}' Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08ipmi: use correct string lengthXiongfeng Wang
gcc-8 reports drivers/char/ipmi/ipmi_msghandler.c: In function 'panic_op_write_handler': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified bound 16 equals destination size [-Wstringop-truncation] drivers/char/ipmi/ipmi_watchdog.c: In function 'set_param_str': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified bound 16 equals destination size [-Wstringop-truncation] We need one less byte or call strlcpy() to make it a nul-terminated string. Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-01-08tpm: remove unused variablesArnd Bergmann
The CLKRUN fix caused a few harmless compile-time warnings: drivers/char/tpm/tpm_tis.c: In function 'tpm_tis_pnp_remove': drivers/char/tpm/tpm_tis.c:274:23: error: unused variable 'priv' [-Werror=unused-variable] drivers/char/tpm/tpm_tis.c: In function 'tpm_tis_plat_remove': drivers/char/tpm/tpm_tis.c:324:23: error: unused variable 'priv' [-Werror=unused-variable] This removes the variables that have now become unused. Fixes: 6d0866cbc2d3 ("tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08tpm: remove unused data fields from I2C and OF device ID tablesJavier Martinez Canillas
The data field for the entries in the device tables are set but not used. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@ziepe.ca> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08tpm: only attempt to disable the LPC CLKRUN if is already enabledJavier Martinez Canillas
Commit 5e572cab92f0 ("tpm: Enable CLKRUN protocol for Braswell systems") added logic in the TPM TIS driver to disable the Low Pin Count CLKRUN signal during TPM transactions. Unfortunately this breaks other devices that are attached to the LPC bus like for example PS/2 mouse and keyboards. One flaw with the logic is that it assumes that the CLKRUN is always enabled, and so it unconditionally enables it after a TPM transaction. But it could be that the CLKRUN# signal was already disabled in the LPC bus and so after the driver probes, CLKRUN_EN will remain enabled which may break other devices that are attached to the LPC bus but don't have support for the CLKRUN protocol. Fixes: 5e572cab92f0 ("tpm: Enable CLKRUN protocol for Braswell systems") Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: James Ettle <james@ettle.org.uk> Tested-by: Jeffery Miller <jmiller@neverware.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08tpm: follow coding style for variable declaration in tpm_tis_core_init()Javier Martinez Canillas
The coding style says "use just one data declaration per line (no commas for multiple data declarations)" so follow this convention. Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08tpm: delete the TPM_TIS_CLK_ENABLE flagJavier Martinez Canillas
This flag is only used to warn if CLKRUN_EN wasn't disabled on Braswell systems, but the only way this can happen is if the code is not correct. So it's an unnecessary check that just makes the code harder to read. Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()Azhar Shaikh
Commit 5e572cab92f0bb5 ("tpm: Enable CLKRUN protocol for Braswell systems") disabled CLKRUN protocol during TPM transactions and re-enabled once the transaction is completed. But there were still some corner cases observed where, reading of TPM header failed for savestate command while going to suspend, which resulted in suspend failure. To fix this issue keep the CLKRUN protocol disabled for the entire duration of a single TPM command and not disabling and re-enabling again for every TPM transaction. For the other TPM accesses outside TPM command flow, add a higher level of disabling and re-enabling the CLKRUN protocol, instead of doing for every TPM transaction. Fixes: 5e572cab92f0bb5 ("tpm: Enable CLKRUN protocol for Braswell systems") Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08tpm_tis: Move ilb_base_addr to tpm_tis_dataAzhar Shaikh
Move static variable ilb_base_addr to tpm_tis_data. Cc: stable@vger.kernel.org Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08tpm2-cmd: allow more attempts for selftest executionAlexander.Steffen@infineon.com
Previously, if the last attempt to execute the selftest command failed with RC_TESTING, there was still a call to tpm_msleep, even though no further attempt would be made. This causes an unnecessary delay, therefore ensure that if the last attempt fails the function is left immediately. Also, instead of ensuring that the cumulated runtime of all attempts is larger than the command duration for TPM2_SelfTest, ensure that there is at least one attempt for which the delay is larger than the expected command duration. This allows slow TPMs to execute all their tests in the background, without slowing down faster TPMs that have finished their tests earlier. If tests are still not finished even with this long delay, then something is broken and the TPM is not used. Fixes: 125a22105410 ("tpm: React correctly to RC_TESTING from TPM 2.0 self tests") Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08tpm: return a TPM_RC_COMMAND_CODE response if command is not implementedJavier Martinez Canillas
According to the TPM Library Specification, a TPM device must do a command header validation before processing and return a TPM_RC_COMMAND_CODE code if the command is not implemented. So user-space will expect to handle that response as an error. But if the in-kernel resource manager is used (/dev/tpmrm?), an -EINVAL errno code is returned instead if the command isn't implemented. This confuses userspace since it doesn't expect that error value. This also isn't consistent with the behavior when not using TPM spaces and accessing the TPM directly (/dev/tpm?). In this case, the command is sent to the TPM even when not implemented and the TPM responds with an error. Instead of returning an -EINVAL errno code when the tpm_validate_command() function fails, synthesize a TPM command response so user-space can get a TPM_RC_COMMAND_CODE as expected when a chip doesn't implement the command. The TPM only sets 12 of the 32 bits in the TPM_RC response, so the TSS and TAB specifications define that higher layers in the stack should use some of the unused 20 bits to specify from which level of the stack the error is coming from. Since the TPM_RC_COMMAND_CODE response code is sent by the kernel resource manager, set the error level to the TAB/RM layer so user-space is aware of this. Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: William Roberts <william.c.roberts@intel.com> Reviewed-by: Philip Tricca <philip.b.tricca@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08tpm: Move Linux RNG connection to hwrngJason Gunthorpe
The tpm-rng.c approach is completely inconsistent with how the kernel handles hotplug. Instead manage a hwrng device for each TPM. This will cause the kernel to read entropy from the TPM when it is plugged in, and allow access to the TPM rng via /dev/hwrng. Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca> Tested-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08tpm: use struct tpm_chip for tpm_chip_find_get()Jarkko Sakkinen
Device number (the character device index) is not a stable identifier for a TPM chip. That is the reason why every call site passes TPM_ANY_NUM to tpm_chip_find_get(). This commit changes the API in a way that instead a struct tpm_chip instance is given and NULL means the default chip. In addition, this commit refines the documentation to be up to date with the implementation. Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> (@chip_num -> @chip part) Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@ziepe.ca> Tested-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
2018-01-08tpm: parse TPM event logs based on EFI tableThiebaud Weksteen
If we are not able to retrieve the TPM event logs from the ACPI table, check the EFI configuration table (Linux-specific GUID). The format version of the log is now returned by the provider function. Signed-off-by: Thiebaud Weksteen <tweek@google.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08tpm: rename event log provider filesThiebaud Weksteen
Rename the current TPM Event Log provider files (ACPI and OF) for clarity. Signed-off-by: Thiebaud Weksteen <tweek@google.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08tpm: move tpm_eventlog.h outside of drivers folderThiebaud Weksteen
The generic definitions of data structures in tpm_eventlog.h are required by other part of the kernel (namely, the EFI stub). Signed-off-by: Thiebaud Weksteen <tweek@google.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08tpm: use tpm_msleep() value as max delayNayna Jain
Currently, tpm_msleep() uses delay_msec as the minimum value in usleep_range. However, that is the maximum time we want to wait. The function is modified to use the delay_msec as the maximum value, not the minimum value. After this change, performance on a TPM 1.2 with an 8 byte burstcount for 1000 extends improved from ~9sec to ~8sec. Fixes: 3b9af007869("tpm: replace msleep() with usleep_range() in TPM 1.2/ 2.0 generic drivers") Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08tpm: reduce tpm polling delay in tpm_tis_coreNayna Jain
The existing wait_for_tpm_stat() polls for the chip status after 5msec sleep. As per TCG ddwg input, it is expected that tpm might return status in few usec. So, reducing the delay in polling to 1msec. Similarly, get_burstcount() function sleeps for 5msec before retrying for next query to burstcount in a loop. If it takes lesser time for TPM to return, this 5msec delay is longer than necessary. After this change, performance on a TPM 1.2 with an 8 byte burstcount for 1000 extends improved from ~14sec to ~9sec. Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-05hwrng: exynos - add Samsung Exynos True RNG driverŁukasz Stelmach
Add support for True Random Number Generator found in Samsung Exynos 5250+ SoCs. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-02Merge 4.15-rc6 into char-misc-nextGreg Kroah-Hartman
We want the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-22hwrng: core - Clean up RNG list when last hwrng is unregisteredGary R Hook
Commit 142a27f0a731 added support for a "best" RNG, and in doing so introduced a hang from rmmod/modprobe -r when the last RNG on the list was unloaded. When the hwrng list is depleted, return the global variables to their original state and decrement all references to the object. Fixes: 142a27f0a731 ("hwrng: core - Reset user selected rng by writing "" to rng_current") Signed-off-by: Gary R Hook <gary.hook@amd.com> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-18/dev/mem: Add bounce buffer for copy-outKees Cook
As done for /proc/kcore in commit df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext data") this adds a bounce buffer when reading memory via /dev/mem. This is needed to allow kernel text memory to be read out when built with CONFIG_HARDENED_USERCOPY (which refuses to read out kernel text) and without CONFIG_STRICT_DEVMEM (which would have refused to read any RAM contents at all). Since this build configuration isn't common (most systems with CONFIG_HARDENED_USERCOPY also have CONFIG_STRICT_DEVMEM), this also tries to inform Kconfig about the recommended settings. This patch is modified from Brad Spengler/PaX Team's changes to /dev/mem code in the last public patch of grsecurity/PaX based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. Reported-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Fixes: f5509cc18daa ("mm: Hardened usercopy") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16tpm: move wait_for_tpm_stat() to respective driver filesNayna Jain
The function wait_for_tpm_stat() is currently defined in tpm-interface file. It is a hardware specific function used only by tpm_tis and xen-tpmfront, so it is removed from tpm-interface.c and defined in respective driver files. Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-12-12ipmi_si: Fix error handling of platform deviceCorey Minyard
Cleanup of platform devices created by the IPMI driver was not being done correctly and could result in a memory leak. So create a local boolean to know how to clean up those platform devices. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-12-12ipmi watchdog: fix typo in parameter descriptionWei Yongjun
Fix typo in parameter description. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-12-12ipmi_si_platform: Fix typo in parameter descriptionWei Yongjun
Fix typo in parameter description. Fixes: 95e300c052fd ("ipmi: Make the DMI probe into a generic platform probe") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-12-11Merge tag 'for-linus-4.15-2' of git://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI fixes from Corey Minyard. * tag 'for-linus-4.15-2' of git://github.com/cminyard/linux-ipmi: ipmi_si: fix crash on parisc ipmi_si: Fix oops with PCI devices ipmi: Stop timers before cleaning up the module
2017-12-11ipmi_si: fix crash on pariscMikulas Patocka
This patch fixes ipmi crash on parisc introduced in the kernel 4.15-rc. The pointer io.io_setup is not initialized and thus it causes crash in try_smi_init when attempting to call new_smi->io.io_setup. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-12-11ipmi_si: Fix oops with PCI devicesCorey Minyard
When the IPMI PCI code was split out, some code was consolidated for setting the io_setup field in the io structure. The PCI code needed this set before registration to probe register spacing, though, so restore the old code for that function. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197999 Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Meelis Roos <mroos@linux.ee>
2017-12-06ipmi: Stop timers before cleaning up the moduleMasamitsu Yamazaki
System may crash after unloading ipmi_si.ko module because a timer may remain and fire after the module cleaned up resources. cleanup_one_si() contains the following processing. /* * Make sure that interrupts, the timer and the thread are * stopped and will not run again. */ if (to_clean->irq_cleanup) to_clean->irq_cleanup(to_clean); wait_for_timer_and_thread(to_clean); /* * Timeouts are stopped, now make sure the interrupts are off * in the BMC. Note that timers and CPU interrupts are off, * so no need for locks. */ while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { poll(to_clean); schedule_timeout_uninterruptible(1); } si_state changes as following in the while loop calling poll(to_clean). SI_GETTING_MESSAGES => SI_CHECKING_ENABLES => SI_SETTING_ENABLES => SI_GETTING_EVENTS => SI_NORMAL As written in the code comments above, timers are expected to stop before the polling loop and not to run again. But the timer is set again in the following process when si_state becomes SI_SETTING_ENABLES. => poll => smi_event_handler => handle_transaction_done // smi_info->si_state == SI_SETTING_ENABLES => start_getting_events => start_new_msg => smi_mod_timer => mod_timer As a result, before the timer set in start_new_msg() expires, the polling loop may see si_state becoming SI_NORMAL and the module clean-up finishes. For example, hard LOCKUP and panic occurred as following. smi_timeout was called after smi_event_handler, kcs_event and hangs at port_inb() trying to access I/O port after release. [exception RIP: port_inb+19] RIP: ffffffffc0473053 RSP: ffff88069fdc3d80 RFLAGS: 00000006 RAX: ffff8806800f8e00 RBX: ffff880682bd9400 RCX: 0000000000000000 RDX: 0000000000000ca3 RSI: 0000000000000ca3 RDI: ffff8806800f8e40 RBP: ffff88069fdc3d80 R8: ffffffff81d86dfc R9: ffffffff81e36426 R10: 00000000000509f0 R11: 0000000000100000 R12: 0000000000]:000000 R13: 0000000000000000 R14: 0000000000000246 R15: ffff8806800f8e00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 --- <NMI exception stack> --- To fix the problem I defined a flag, timer_can_start, as member of struct smi_info. The flag is enabled immediately after initializing the timer and disabled immediately before waiting for timer deletion. Fixes: 0cfec916e86d ("ipmi: Start the timer and thread on internal msgs") Signed-off-by: Yamazaki Masamitsu <m-yamazaki@ah.jp.nec.com> [Adjusted for recent changes in the driver.] Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-11-29crypto: chacha20 - Fix keystream alignment for chacha20_block()Eric Biggers
When chacha20_block() outputs the keystream block, it uses 'u32' stores directly. However, the callers (crypto/chacha20_generic.c and drivers/char/random.c) declare the keystream buffer as a 'u8' array, which is not guaranteed to have the needed alignment. Fix it by having both callers declare the keystream as a 'u32' array. For now this is preferable to switching over to the unaligned access macros because chacha20_block() is only being used in cases where we can easily control the alignment (stack buffers). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-29hwrng: bcm63xx - Remove since bcm2835-rng takes overFlorian Fainelli
bcm2835-rng is now capable of supporting the BCM63xx hardware, so remove the driver which duplicates the same functionality. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit (git 2.34.1) at 2025-03-21 22:08:26 +0000