| Age | Commit message (Collapse) | Author |
|---|
|
All the IPMI address sources now supply a real device. This cheap
hack is no longer necessary.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
The same basic code was in two places.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
When a hotmod-added device is removed or when the module is removed,
remove the platform devices that was created for it.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Instead of keeping track of each one, just scan the platform bus
for hardcode devices and remove them.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Don't force the main code to create one for it.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
It was being done in two different places now that hard-coded devices
use platform devices, and it's about to be three with hotmod switching
to platform devices. So put the code in one place.
This required some rework on some interfaces to make the type space
clean.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Make the naming consistent, and make the values an enum.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Things dealing with registers and addresses are all unsigned, make
them so.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
When excuting a command like:
modprobe ipmi_si ports=0xffc0e3 type=bt
The system would get an oops.
The trouble here is that ipmi_si_hardcode_find_bmc() is called before
ipmi_si_platform_init(), but initialization of the hard-coded device
creates an IPMI platform device, which won't be initialized yet.
The real trouble is that hard-coded devices aren't created with
any device, and the fixup is done later. So do it right, create the
hard-coded devices as normal platform devices.
This required adding some new resource types to the IPMI platform
code for passing information required by the hard-coded device
and adding some code to remove the hard-coded platform devices
on module removal.
To enforce the "hard-coded devices passed by the user take priority
over firmware devices" rule, some special code was added to check
and see if a hard-coded device already exists.
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Yang Yingliang <yangyingliang@huawei.com>
|
|
Fixes the following sparse warning:
drivers/char/hw_random/optee-rng.c:265:35: warning:
symbol 'optee_rng_id_table' was not declared. Should it be static?
Fixes: 5fe8b1cc6a03 ("hwrng: add OP-TEE based rng driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The return from the call to tee_client_invoke_func can be a
negative error code however this is being assigned to an
unsigned variable 'ret' hence the check is always false.
Fix this by making 'ret' an int.
Detected by Coccinelle ("Unsigned expression compared with zero:
ret < 0")
Fixes: 5fe8b1cc6a03 ("hwrng: add OP-TEE based rng driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Clang warns:
drivers/char/hw_random/optee-rng.c:80:31: warning: suggest braces around
initialization of subobject [-Wmissing-braces]
struct tee_param param[4] = {0};
^
{}
drivers/char/hw_random/optee-rng.c:177:31: warning: suggest braces
around initialization of subobject [-Wmissing-braces]
struct tee_param param[4] = {0};
^
{}
drivers/char/hw_random/optee-rng.c:212:48: warning: suggest braces
around initialization of subobject [-Wmissing-braces]
struct tee_ioctl_open_session_arg sess_arg = {0};
^
{}
3 warnings generated.
One way to fix these warnings is to add additional braces like Clang
suggests; however, there has been a bit of push back from some
maintainers, who just prefer memset as it is unambiguous, doesn't
depend on a particular compiler version, and properly initializes all
subobjects [1][2]. Do that here so there are no more warnings.
[1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/
[2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/
Fixes: 5fe8b1cc6a03 ("hwrng: add OP-TEE based rng driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/369
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Introduce TEE bus driver framework
- supp_nowait flag for non-blocking tee requests
- The tee bus driver framework
- OP-TEE TEE bus device enumeration support
- An OP-TEE based rng driver
* tag 'tee-bus-for-5.1' of https://git.linaro.org/people/jens.wiklander/linux-tee:
hwrng: add OP-TEE based rng driver
tee: optee: add TEE bus device enumeration support
tee: add bus driver framework for TEE based devices
tee: add supp_nowait flag in tee_context struct
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/char/lp.c: In function ‘lp_compat_ioctl’:
drivers/char/lp.c:756:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (!COMPAT_USE_64BIT_TIME) {
^
drivers/char/lp.c:761:2: note: here
case LPSETTIMEOUT_NEW:
^~~~
drivers/char/lp.c: In function ‘lp_ioctl’:
drivers/char/lp.c:728:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (BITS_PER_LONG == 32) {
^
drivers/char/lp.c:733:2: note: here
case LPSETTIMEOUT_NEW:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that in some cases, the code comment is modified in
accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch enables a user to specify the additional optional command
parameter by writing it into the request file:
# echo "23 16" > request
# cat request
23 16
For backwards compatibility:
If only 1 parameter is given then we assume this is the operation request
number.
# echo "5" > request
# cat request
5
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: David Safford <david.safford@ge.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
TPM PPI 1.3 introduces an additional optional command parameter
that may be needed for some commands. Display the parameter if the
command requires such a parameter. Only command 23 needs one.
The PPI request file will show output like this then:
# echo "23 16" > request
# cat request
23 16
# echo "5" > request
# cat request
5
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: David Safford <david.safford@ge.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
TPM PPI 1.3 defines operations up to number 101. We need to query up
to this number to show the user what the firmware implements.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: David Safford <david.safford@ge.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
TPM PPI 1.3 introduces a function revision 2 for some functions. So,
rename the existing TPM_PPI_REVISION_ID to TPM_PPI_REVISION_ID_1.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: David Safford <david.safford@ge.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Since we will need to pass different function revision numbers
to tpm_eval_dsm, convert this function now to take the function revision
as an additional parameter.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: David Safford <david.safford@ge.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Currently, tpm_pcr_extend() accepts as an input only a SHA1 digest.
This patch replaces the hash parameter of tpm_pcr_extend() with an array of
tpm_digest structures, so that the caller can provide a digest for each PCR
bank currently allocated in the TPM.
tpm_pcr_extend() will not extend banks for which no digest was provided,
as it happened before this patch, but instead it requires that callers
provide the full set of digests. Since the number of digests will always be
chip->nr_allocated_banks, the count parameter has been removed.
Due to the API change, ima_pcr_extend() and pcrlock() have been modified.
Since the number of allocated banks is not known in advance, the memory for
the digests must be dynamically allocated. To avoid performance degradation
and to avoid that a PCR extend is not done due to lack of memory, the array
of tpm_digest structures is allocated by the users of the TPM driver at
initialization time.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Mimi Zohar <zohar@linux.ibm.com> (on x86 for TPM 1.2 & PTT TPM 2.0)
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
The tpm_chip structure contains the list of PCR banks currently allocated
in the TPM. When support for crypto agility will be added to the TPM
driver, users of the driver have to provide a digest for each allocated
bank to tpm_pcr_extend(). With this patch, they can obtain the PCR bank
algorithms directly from chip->allocated_banks.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Currently, the TPM driver retrieves the digest size from a table mapping
TPM algorithms identifiers to identifiers defined by the crypto subsystem.
If the algorithm is not defined by the latter, the digest size can be
retrieved from the output of the PCR read command.
The patch modifies the definition of tpm_pcr_read() and tpm2_pcr_read() to
pass the desired hash algorithm and obtain the digest size at TPM startup.
Algorithms and corresponding digest sizes are stored in the new structure
tpm_bank_info, member of tpm_chip, so that the information can be used by
other kernel subsystems.
tpm_bank_info contains: the TPM algorithm identifier, necessary to generate
the event log as defined by Trusted Computing Group (TCG); the digest size,
to pad/truncate a digest calculated with a different algorithm; the crypto
subsystem identifier, to calculate the digest of event data.
This patch also protects against data corruption that could happen in the
bus, by checking that the digest size returned by the TPM during a PCR read
matches the size of the algorithm passed to tpm2_pcr_read().
For the initial PCR read, when digest sizes are not yet available, this
patch ensures that the amount of data copied from the output returned by
the TPM does not exceed the size of the array data are copied to.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Rename tpm2_* to tpm_* and move the definitions to include/linux/tpm.h so
that these can be used by other kernel subsystems (e.g. IMA).
Also, set the length of the digest array in tpm_digest to a new constant
named TPM_MAX_DIGEST_SIZE, equal to SHA512_DIGEST_SIZE.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
This patch renames active_banks (member of tpm_chip) to allocated_banks,
stores the number of allocated PCR banks in nr_allocated_banks (new member
of tpm_chip), and replaces the static array with a pointer to a dynamically
allocated array.
tpm2_get_pcr_allocation() determines if a PCR bank is allocated by checking
the mask in the TPML_PCR_SELECTION structure returned by the TPM for
TPM2_Get_Capability(). If a bank is not allocated, the TPM returns that
bank in TPML_PCR_SELECTION, with all bits in the mask set to zero. In this
case, the bank is not included in chip->allocated_banks, to avoid that TPM
driver users unnecessarily calculate a digest for that bank.
One PCR bank with algorithm set to SHA1 is always allocated for TPM 1.x.
As a consequence of the introduction of nr_allocated_banks,
tpm_pcr_extend() does not check anymore if the algorithm stored in tpm_chip
is equal to zero.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Remove @flags from tpm_transmit() API. It is no longer used for
anything.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
Call tpm_chip_start() and tpm_chip_stop() in
* tpm_chip_register()
* tpm_class_shutdown()
* tpm_del_char_device()
* tpm_pm_suspend()
* tpm_try_get_ops() and tpm_put_ops()
* tpm2_del_space()
And remove these calls from tpm_transmit(). The core reason for this
change is that in tpm_vtpm_proxy a locality change requires a virtual
TPM command (a command made up just for that driver).
The consequence of this is that this commit removes the remaining nested
calls.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
Encapsulate power gating and locality functionality to tpm_chip_start()
and tpm_chip_stop() in order to clean up the branching mess in
tpm_transmit().
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
Added locking as part of tpm_try_get_ops() and tpm_put_ops() as they are
anyway used in most of the call sites except in tpmrm_release() where we
take the locks manually.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
Use tpm_try_get_ops() in tpm-sysfs.c so that we can consider moving
other decorations (locking, localities, power management for example)
inside it. This direction can be of course taken only after other call
sites for tpm_transmit() have been treated in the same way.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
Remove @space from tpm_transmit() API` in order to completely remove the
bound between low-level transmission functionality and TPM spaces. The
only real dependency existing is the amount of data saved before trying
to send a command to the TPM.
It doesn't really matter if we save always a bit more than needed so
this commit changes the amount saved always to be the size of the TPM
header and three handles.
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
Prepare and commit TPM space before and after calling tpm_transmit()
instead of doing that inside tpm_transmit(). After this change we can
remove TPM_TRANSMIT_NESTED flag from tpm2_prepare_space() and
tpm2_commit_space() and replace it with TPM_TRANSMIT_UNLOCKED.
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
Move tpm_validate_command() to tpm2-space.c and make it part of the
tpm2_prepare_space() flow. Make cc resolution as part of the TPM space
functionality in order to detach it from rest of the tpm_transmit()
flow.
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
Move locking, locality handling and power management to tpm_transmit()
in order to simplify the flow.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
Encapsulate tpm_transmit() call pattern to tpm_dev_transmit() because it
is identically used from two places. Use unlocked version of
tpm_transmit() so that we are able to move the calls to
tpm2_prepare_space() and tpm2_commit_space() later on to this new
function.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
Instead of accessing fields of the command header through offsets to
the raw buffer, it is a better idea to use the header struct pointer
that is already used elsewhere in the function.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
Declare struct tpm_header that replaces struct tpm_input_header and
struct tpm_output_header.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
The error logging for tpm2_commit_space() is in a wrong place. This
commit moves it inside that function.
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
Do not print partial list of PCRs when tpm1_pcr_read() fails but instead
return 0 from pcrs_show(). This is consistent behavior with other sysfs
functions.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
Return zero when tpm_buf_init() fails as we do for other functions in
tpm-sysfs.c.
Fixes: da379f3c1db0c ("tpm: migrate pubek_show to struct tpm_buf")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
Since we pass an initialized struct tpm_buf instance in every call site
now, it is cleaner to pass that directly to the tpm_transmit_cmd() as
the TPM command/response buffer.
Fine-tune a little bit tpm_transmit() and tpm_transmit_cmd() comments
while doing this.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
Set tpm_chip->timeouts_adjusted directly in the update_timeouts
code instead of returning bool. In case of tpm read failing
print warning that the read failed and continue on.
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Currently tpm_transmit_cmd will print an error message if the tpm
returns something other than TPM2_RC_SUCCESS. This means that if the
tpm returns that it is testing an error message will be printed, and
this can cause confusion for the end user. So avoid printing the error
message if TPM2_RC_TESTING is the return code.
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
TCG defines two structures, TCG_EfiSpecIDEventStruct and TCG_PCR_EVENT2,
which contain variable-sized arrays in the middle of the definition.
Since these structures are not suitable for type casting, this patch
removes structure members after the variable-sized arrays and adds the
_head suffix to the structure name, to indicate that the renamed structures
do not contain all fields defined by TCG.
Lastly, given that variable-sized arrays are now in the last position, and
given that the size of the arrays cannot be determined in advance, this
patch also sets the size of those arrays to zero and removes the definition
of TPM2_ACTIVE_PCR_BANKS.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
It is unable to read the entry when it is the only one in
binary_bios_measurements:
00000000 00 00 00 00 08 00 00 00 c4 2f ed ad 26 82 00 cb
00000010 1d 15 f9 78 41 c3 44 e7 9d ae 33 20 00 00 00 00
00000020
This is obviously a firmware problem on my linux machine:
Manufacturer: Inspur
Product Name: SA5212M4
Version: 01
However, binary_bios_measurements should return it any way,
rather than nothing, after all its content is completely
valid.
Fixes: 55a82ab3181b ("tpm: add bios measurement log")
Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com>
Reviewd-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
The responsibility of tpm1_bios_measurements_start() is to walk over the
first *pos measurements, ensuring the skipped and to-be-read
measurements are not out-of-boundary.
This commit simplifies the loop by employing a do-while loop with
the necessary sanity check.
Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com>
Reviewd-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Return -E2BIG when the transfer is incomplete. The upper layer does
not retry, so not doing that is incorrect behaviour.
Cc: stable@vger.kernel.org
Fixes: a2871c62e186 ("tpm: Add support for Atmel I2C TPMs")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
|
|
The send() callback should never return length as it does not in every
driver except tpm_crb in the success case. The reason is that the main
transmit functionality only cares about whether the transmit was
successful or not and ignores the count completely.
Suggested-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
|
|
Use guid_copy() instead of memcpy() to hide guid_t implementation details and
to show we expect guid_t in a raw buffer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Instead of magic number use pre-defined constant for UUID binary and
string representations.
While here, drop the implementation details of guid_t type.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[Also converted a "17" in the error string to UUID_SIZE + 1]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Trying to make things more consistent and compliant with what should
be in drivers.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
