summaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)Author
2014-12-30ipmi: Fix compile warning with tv_usecCorey Minyard
It's not a long int on all arches. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2014-12-25Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Xmas fixes pull: core: one atomic fix, revert the WARN_ON dumb buffers patch. agp: fixup Dave J. nouveau: fix 3.18 regression for old userspace tegra fixes: vblank and iommu fixes amdkfd: fix bugs shown by testing with userspace, init apertures once msm: hdmi fixes and cleanup i915: misc fixes There is also a link ordering fix that I've asked to be cc'ed to you, putting iommu before gpu, it fixes an issue with amdkfd when things are all in the kernel, but I didn't like sending it via my tree without discussion. I'll probably be a bit on/off for a few weeks with pulls now, due to holidays and LCA, so don't be surprised if stuff gets a bit backed up, and things end up a bit large due to lag" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (28 commits) Revert "drm/gem: Warn on illegal use of the dumb buffer interface v2" agp: Fix up email address & attributions in AGP MODULE_AUTHOR tags nouveau: bring back legacy mmap handler drm/msm/hdmi: rework HDMI IRQ handler drm/msm/hdmi: enable regulators before clocks to avoid warnings drm/msm/mdp5: update irqs on crtc<->encoder link change drm/msm: block incoming update on pending updates drm/atomic: fix potential null ptr on plane enable drm/msm: Deletion of unnecessary checks before the function call "release_firmware" drm/msm: Deletion of unnecessary checks before two function calls drm/tegra: dc: Select root window for event dispatch drm/tegra: gem: Use the proper size for GEM objects drm/tegra: gem: Flush buffer objects upon allocation drm/tegra: dc: Fix a potential race on page-flip completion drm/tegra: dc: Consistently use the same pipe drm/irq: Add drm_crtc_vblank_count() drm/irq: Add drm_crtc_handle_vblank() drm/irq: Add drm_crtc_send_vblank_event() drm/i915: Disable PSMI sleep messages on all rings around context switches drm/i915: Force the CS stall for invalidate flushes ...
2014-12-23agp: Fix up email address & attributions in AGP MODULE_AUTHOR tagsDave Jones
- Remove soon-to-be-dead @redhat address. - Jeff Hartmann wrote the bulk of the original backend code, and should at least get a mention in the MODULE_AUTHOR for backend.o - Various people at Intel have done a lot more work than myself on the intel-* drivers, so again, mention that. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-12-21ipmi: Fix compile issue with isspace()Corey Minyard
Some arches don't get ctypes.h included from these includes, so add it explicitly. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2014-12-21ipmi: Finish cleanup of BMC attributesCorey Minyard
The previous cleanup of BMC attributes left a few holes, and if you run with lockdep debugging with a BMC with the proper attributes, you could get a warning. This patch removes all the unused attributes from the BMC structure, since they are all declared in the .data section now. It makes the attributes all static. It fixes the referencing of the attributes in a couple of cases that dynamically added the files depending on BMC information. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Huang Ying <ying.huang@intel.com> Tested-by: Alexei Starovoitov <ast@plumgrid.com>
2014-12-15Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - AMD KFD driver merge This is the AMD HSA interface for exposing a lowlevel interface for GPGPU use. They have an open source userspace built on top of this interface, and the code looks as good as it was going to get out of tree. - Initial atomic modesetting work The need for an atomic modesetting interface to allow userspace to try and send a complete set of modesetting state to the driver has arisen, and been suffering from neglect this past year. No more, the start of the common code and changes for msm driver to use it are in this tree. Ongoing work to get the userspace ioctl finished and the code clean will probably wait until next kernel. - DisplayID 1.3 and tiled monitor exposed to userspace. Tiled monitor property is now exposed for userspace to make use of. - Rockchip drm driver merged. - imx gpu driver moved out of staging Other stuff: - core: panel - MIPI DSI + new panels. expose suggested x/y properties for virtual GPUs - i915: Initial Skylake (SKL) support gen3/4 reset work start of dri1/ums removal infoframe tracking fixes for lots of things. - nouveau: tegra k1 voltage support GM204 modesetting support GT21x memory reclocking work - radeon: CI dpm fixes GPUVM improvements Initial DPM fan control - rcar-du: HDMI support added removed some support for old boards slave encoder driver for Analog Devices adv7511 - exynos: Exynos4415 SoC support - msm: a4xx gpu support atomic helper conversion - tegra: iommu support universal plane support ganged-mode DSI support - sti: HDMI i2c improvements - vmwgfx: some late fixes. - qxl: use suggested x/y properties" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits) drm: sti: fix module compilation issue drm/i915: save/restore GMBUS freq across suspend/resume on gen4 drm: sti: correctly cleanup CRTC and planes drm: sti: add HQVDP plane drm: sti: add cursor plane drm: sti: enable auxiliary CRTC drm: sti: fix delay in VTG programming drm: sti: prepare sti_tvout to support auxiliary crtc drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off} drm: sti: fix hdmi avi infoframe drm: sti: remove event lock while disabling vblank drm: sti: simplify gdp code drm: sti: clear all mixer control drm: sti: remove gpio for HDMI hot plug detection drm: sti: allow to change hdmi ddc i2c adapter drm/doc: Document drm_add_modes_noedid() usage drm/i915: Remove '& 0xffff' from the mask given to WA_REG() drm/i915: Invert the mask and val arguments in wa_add() and WA_REG() drm: Zero out DRM object memory upon cleanup drm/i915/bdw: Fix the write setting up the WIZ hashing mode ...
2014-12-14Merge tag 'char-misc-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver update for 3.19-rc1 Lots of little things all over the place in different drivers, and a new subsystem, "coresight" has been added. Full details are in the shortlog" * tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (73 commits) parport: parport_pc, do not remove parent devices early spmi: Remove shutdown/suspend/resume kernel-doc carma-fpga-program: drop videobuf dependency carma-fpga: drop videobuf dependency carma-fpga-program.c: fix compile errors i8k: Fix temperature bug handling in i8k_get_temp() cxl: Name interrupts in /proc/interrupt CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning coresight-replicator: remove .owner field for driver coresight: fixed comments in coresight.h coresight: fix typo in comment in coresight-priv.h coresight: bindings for coresight drivers coresight: Adding ABI documentation w1: support auto-load of w1_bq27000 module. w1: avoid potential u16 overflow cn: verify msg->len before making callback mei: export fw status registers through sysfs mei: read and print all six FW status registers mei: txe: add cherrytrail device id mei: kill cached host and me csr values ...
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto update from Herbert Xu: - The crypto API is now documented :) - Disallow arbitrary module loading through crypto API. - Allow get request with empty driver name through crypto_user. - Allow speed testing of arbitrary hash functions. - Add caam support for ctr(aes), gcm(aes) and their derivatives. - nx now supports concurrent hashing properly. - Add sahara support for SHA1/256. - Add ARM64 version of CRC32. - Misc fixes. * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (77 commits) crypto: tcrypt - Allow speed testing of arbitrary hash functions crypto: af_alg - add user space interface for AEAD crypto: qat - fix problem with coalescing enable logic crypto: sahara - add support for SHA1/256 crypto: sahara - replace tasklets with kthread crypto: sahara - add support for i.MX53 crypto: sahara - fix spinlock initialization crypto: arm - replace memset by memzero_explicit crypto: powerpc - replace memset by memzero_explicit crypto: sha - replace memset by memzero_explicit crypto: sparc - replace memset by memzero_explicit crypto: algif_skcipher - initialize upon init request crypto: algif_skcipher - removed unneeded code crypto: algif_skcipher - Fixed blocking recvmsg crypto: drbg - use memzero_explicit() for clearing sensitive data crypto: drbg - use MODULE_ALIAS_CRYPTO crypto: include crypto- module prefix in template crypto: user - add MODULE_ALIAS crypto: sha-mb - remove a bogus NULL check crytpo: qat - Fix 64 bytes requests ...
2014-12-11ipmi: Check the BT interrupt enable periodicallyCorey Minyard
On a reset, the BMC may reset the BT enable in the processor registers (different than the global enables in the BMC). Check it periodically and fix it if necessary. Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Tony Rex <tony.rex@ericsson.com> Tested-by: Magnus Johansson E <magnus.e.johansson@ericsson.com>
2014-12-11ipmi: Fix attention handling for system interfacesCorey Minyard
If an attention came in while handling a message response, it could cause the state machine to go into the wrong mode and lock things up if the state machine wasn't in normal mode. So if the state machine is not in normal mode, save the attention flag for later. Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Tony Rex <tony.rex@ericsson.com> Tested-by: Magnus Johansson E <magnus.e.johansson@ericsson.com> Cc: Per Fogelström <per.fogelstrom@ericsson.com>
2014-12-11ipmi: Periodically check to see if irqs and messages are set rightCorey Minyard
The BMC can be reset while we are running; that means the interrupt and event message buffer settings may be wrong. So periodically check to see if these values are correct, and fix them if they are wrong. Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Tony Rex <tony.rex@ericsson.com> Tested-by: Magnus Johansson E <magnus.e.johansson@ericsson.com>
2014-12-11drivers/char/ipmi: Add powernv IPMI driverJeremy Kerr
This change adds an initial IPMI driver for powerpc OPAL firmware. The interface is exposed entirely through firmware: we have two functions to send and receive IPMI messages, and an interrupt notification from the firmware to signify that a message is available. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2014-12-11ipmi: Add SMBus interface driver (SSIF)Corey Minyard
This patch adds the SMBus interface to the IPMI driver. Signed-off-by: Corey Minyard <minyard@acm.org> Documentation/IPMI.txt | 32 drivers/char/ipmi/Kconfig | 11 drivers/char/ipmi/Makefile | 1 drivers/char/ipmi/ipmi_smb.c | 1737 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 1769 insertions(+), 12 deletions(-)
2014-12-11ipmi: Remove the now unused priority from SMI senderCorey Minyard
Since the queue was moved into the message handler, the priority field is now irrelevant. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2014-12-11ipmi: Remove the now unnecessary message queueCorey Minyard
A message queue was added to the message handler, so the SMI interfaces only need to handle one message at a time. Pull out the message queue. This also leads to some significant simplification in the shutdown of an interface, since the message handler now does a lot of the cleanup. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2014-12-11ipmi: Make the message handler easier to use for SMI interfacesCorey Minyard
The message handler expected the SMI interface to keep a queue of messages, but that was kind of silly, the queue would be easier to manage in the message handler itself. As part of that, fix the message cleanup to make sure no messages are outstanding when an SMI interface is unregistered. This makes it easier for an SMI interface to unregister, it just has to call ipmi_unregister_smi() first and all processing from the message handler will be cleaned up. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2014-12-11ipmi: Move message sending into its own functionCorey Minyard
Getting ready for a transmit queue. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2014-12-11ipmi: rename waiting_msgs to waiting_rcv_msgsCorey Minyard
To avoid confusion with the coming transmit message queue. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2014-12-11ipmi: Fix handling of BMC flagsCorey Minyard
The handling of BMC flags wasn't quite right in a few places, mainly around enabling and disabling interrupts in the BMC. Clean up the code and fix the handling of the flags. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2014-12-11ipmi: Initialize BMC device attributesCorey Minyard
This avoids an oops at initialization time. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Sanjeev <singhsan@codeaurora.org>
2014-12-11ipmi: Unregister previously registered driver in error casetrenn@suse.de
Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2014-12-11ipmi: Fix a bug in hot add/removeCorey Minyard
There was a wrong variable used in the name parsing. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2014-12-11ipmi: Remove useless sysfs_name parametersCorey Minyard
It was always "bmc", so just hardcode it. It makes no sense to pass that in. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2014-12-11ipmi: clean up the device handling for the bmc deviceCorey Minyard
Embed the platform device in the bmc device instead of externally allocating it, use more proper form for creating the device attributes, and other general cleanups. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2014-12-11ipmi: Move the address source to string to ipmi-generic codeCorey Minyard
It was in the system interface driver, but is generic functionality. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2014-12-11ipmi: Ignore SSIF in the PNP handlingCorey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2014-12-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "virtio: virtio 1.0 support, misc patches This adds a lot of infrastructure for virtio 1.0 support. Notable missing pieces: virtio pci, virtio balloon (needs spec extension), vhost scsi. Plus, there are some minor fixes in a couple of places. Note: some net drivers are affected by these patches. David said he's fine with merging these patches through my tree. Rusty's on vacation, he acked using my tree for these, too" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (70 commits) virtio_ccw: finalize_features error handling virtio_ccw: future-proof finalize_features virtio_pci: rename virtio_pci -> virtio_pci_common virtio_pci: update file descriptions and copyright virtio_pci: split out legacy device support virtio_pci: setup config vector indirectly virtio_pci: setup vqs indirectly virtio_pci: delete vqs indirectly virtio_pci: use priv for vq notification virtio_pci: free up vq->priv virtio_pci: fix coding style for structs virtio_pci: add isr field virtio: drop legacy_only driver flag virtio_balloon: drop legacy_only driver flag virtio_ccw: rev 1 devices set VIRTIO_F_VERSION_1 virtio: allow finalize_features to fail virtio_ccw: legacy: don't negotiate rev 1/features virtio: add API to detect legacy devices virtio_console: fix sparse warnings vhost: remove unnecessary forward declarations in vhost.h ...
2014-12-10Merge tag 'pm+acpi-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This time we have some more new material than we used to have during the last couple of development cycles. The most important part of it to me is the introduction of a unified interface for accessing device properties provided by platform firmware. It works with Device Trees and ACPI in a uniform way and drivers using it need not worry about where the properties come from as long as the platform firmware (either DT or ACPI) makes them available. It covers both devices and "bare" device node objects without struct device representation as that turns out to be necessary in some cases. This has been in the works for quite a few months (and development cycles) and has been approved by all of the relevant maintainers. On top of that, some drivers are switched over to the new interface (at25, leds-gpio, gpio_keys_polled) and some additional changes are made to the core GPIO subsystem to allow device drivers to manipulate GPIOs in the "canonical" way on platforms that provide GPIO information in their ACPI tables, but don't assign names to GPIO lines (in which case the driver needs to do that on the basis of what it knows about the device in question). That also has been approved by the GPIO core maintainers and the rfkill driver is now going to use it. Second is support for hardware P-states in the intel_pstate driver. It uses CPUID to detect whether or not the feature is supported by the processor in which case it will be enabled by default. However, it can be disabled entirely from the kernel command line if necessary. Next is support for a platform firmware interface based on ACPI operation regions used by the PMIC (Power Management Integrated Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms. That interface is used for manipulating power resources and for thermal management: sensor temperature reporting, trip point setting and so on. Also the ACPI core is now going to support the _DEP configuration information in a limited way. Basically, _DEP it supposed to reflect off-the-hierarchy dependencies between devices which may be very indirect, like when AML for one device accesses locations in an operation region handled by another device's driver (usually, the device depended on this way is a serial bus or GPIO controller). The support added this time is sufficient to make the ACPI battery driver work on Asus T100A, but it is general enough to be able to cover some other use cases in the future. Finally, we have a new cpufreq driver for the Loongson1B processor. In addition to the above, there are fixes and cleanups all over the place as usual and a traditional ACPICA update to a recent upstream release. As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for Intel platforms should be able to handle power management of the DMA engine correctly, the cpufreq-dt driver should interact with the thermal subsystem in a better way and the ACPI backlight driver should handle some more corner cases, among other things. On top of the ACPICA update there are fixes for race conditions in the ACPICA's interrupt handling code which might lead to some random and strange looking failures on some systems. In the cleanups department the most visible part is the series of commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration option. That was triggered by a discussion regarding the generic power domains code during which we realized that trying to support certain combinations of PM config options was painful and not really worth it, because nobody would use them in production anyway. For this reason, we decided to make CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the conclusion that the latter became redundant and CONFIG_PM could be used instead of it. The material here makes that replacement in a major part of the tree, but there will be at least one more batch of that in the second part of the merge window. Specifics: - Support for retrieving device properties information from ACPI _DSD device configuration objects and a unified device properties interface for device drivers (and subsystems) on top of that. As stated above, this works with Device Trees and ACPI and allows device drivers to be written in a platform firmware (DT or ACPI) agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are now going to use this new interface and the GPIO subsystem is additionally modified to allow device drivers to assign names to GPIO resources returned by ACPI _CRS objects (in case _DSD is not present or does not provide the expected data). The changes in this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam, Geert Uytterhoeven). - Support for Hardware Managed Performance States (HWP) as described in Volume 3, section 14.4, of the Intel SDM in the intel_pstate driver. CPUID is used to detect whether or not the feature is supported by the processor. If supported, it will be enabled automatically unless the intel_pstate=no_hwp switch is present in the kernel command line. From Dirk Brandewie. - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie). - Support for firmware interface based on ACPI operation regions used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR platforms for power resource control and thermal management (Aaron Lu). - Limited support for retrieving off-the-hierarchy dependencies between devices from ACPI _DEP device configuration objects and deferred probing support for the ACPI battery driver based on the _DEP information to make that driver work on Asus T100A (Lan Tianyu). - New cpufreq driver for the Loongson1B processor (Kelvin Cheung). - ACPICA update to upstream revision 20141107 which only affects tools (Bob Moore). - Fixes for race conditions in the ACPICA's interrupt handling code and in the ACPI code related to system suspend and resume (Lv Zheng and Rafael J Wysocki). - ACPI core fix for an RCU-related issue in the ioremap() regions management code that slowed down significantly after CPUs had been allowed to enter idle states even if they'd had RCU callbakcs queued and triggered some problems in certain proprietary graphics driver (and elsewhere). The fix replaces synchronize_rcu() in that code with synchronize_rcu_expedited() which makes the issue go away. From Konstantin Khlebnikov. - ACPI LPSS (Low-Power Subsystem) driver fix to handle power management of the DMA engine included into the LPSS correctly. The problem is that the DMA engine doesn't have ACPI PM support of its own and it simply is turned off when the last LPSS device having ACPI PM support goes into D3cold. To work around that, the PM domain used by the ACPI LPSS driver is redesigned so at least one device with ACPI PM support will be on as long as the DMA engine is in use. From Andy Shevchenko. - ACPI backlight driver fix to avoid using it on "Win8-compatible" systems where it doesn't work and where it was used by default by mistake (Aaron Lu). - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki, Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin Chaugule (mostly related to the upcoming ARM64 support). - Intel RAPL (Running Average Power Limit) power capping driver fixes and improvements including new processor IDs (Jacob Pan). - Generic power domains modification to power up domains after attaching devices to them to meet the expectations of device drivers and bus types assuming devices to be accessible at probe time (Ulf Hansson). - Preliminary support for controlling device clocks from the generic power domains core code and modifications of the ARM/shmobile platform to use that feature (Ulf Hansson). - Assorted minor fixes and cleanups of the generic power domains core code (Ulf Hansson, Geert Uytterhoeven). - Assorted minor fixes and cleanups of the device clocks control code in the PM core (Geert Uytterhoeven, Grygorii Strashko). - Consolidation of device power management Kconfig options by making CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter which is now redundant (Rafael J Wysocki and Kevin Hilman). That is the first batch of the changes needed for this purpose. - Core device runtime power management support code cleanup related to the execution of callbacks (Andrzej Hajda). - cpuidle ARM support improvements (Lorenzo Pieralisi). - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and Bartlomiej Zolnierkiewicz). - New cpufreq driver callback (->ready) to be executed when the cpufreq core is ready to use a given policy object and cpufreq-dt driver modification to use that callback for cooling device registration (Viresh Kumar). - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James Geboski, Tomeu Vizoso). - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate, cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao, Stefan Wahren, Petr Cvek). - OPP (Operating Performance Points) framework modification to allow OPPs to be removed too and update of a few cpufreq drivers (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added during initialization) on driver removal (Viresh Kumar). - Hibernation core fixes and cleanups (Tina Ruchandani and Markus Elfring). - PM Kconfig fix related to CPU power management (Pankaj Dubey). - cpupower tool fix (Prarit Bhargava)" * tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tools: cpupower: fix return checks for sysfs_get_idlestate_count() drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM leds: leds-gpio: Fix multiple instances registration without 'label' property iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros ...
2014-12-09Merge tag 'asm-generic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic asm/io.h rewrite from Arnd Bergmann: "While there normally is no reason to have a pull request for asm-generic but have all changes get merged through whichever tree needs them, I do have a series for 3.19. There are two sets of patches that change significant portions of asm/io.h, and this branch contains both in order to resolve the conflicts: - Will Deacon has done a set of patches to ensure that all architectures define {read,write}{b,w,l,q}_relaxed() functions or get them by including asm-generic/io.h. These functions are commonly used on ARM specific drivers to avoid expensive L2 cache synchronization implied by the normal {read,write}{b,w,l,q}, but we need to define them on all architectures in order to share the drivers across architectures and to enable CONFIG_COMPILE_TEST configurations for them - Thierry Reding has done an unrelated set of patches that extends the asm-generic/io.h file to the degree necessary to make it useful on ARM64 and potentially other architectures" * tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (29 commits) ARM64: use GENERIC_PCI_IOMAP sparc: io: remove duplicate relaxed accessors on sparc32 ARM: sa11x0: Use void __iomem * in MMIO accessors arm64: Use include/asm-generic/io.h ARM: Use include/asm-generic/io.h asm-generic/io.h: Implement generic {read,write}s*() asm-generic/io.h: Reconcile I/O accessor overrides /dev/mem: Use more consistent data types Change xlate_dev_{kmem,mem}_ptr() prototypes ARM: ixp4xx: Properly override I/O accessors ARM: ixp4xx: Fix build with IXP4XX_INDIRECT_PCI ARM: ebsa110: Properly override I/O accessors ARC: Remove redundant PCI_IOBASE declaration documentation: memory-barriers: clarify relaxed io accessor semantics x86: io: implement dummy relaxed accessor macros for writes tile: io: implement dummy relaxed accessor macros for writes sparc: io: implement dummy relaxed accessor macros for writes powerpc: io: implement dummy relaxed accessor macros for writes parisc: io: implement dummy relaxed accessor macros for writes mn10300: io: implement dummy relaxed accessor macros for writes ...
2014-12-09virtio_console: fix sparse warningsMichael S. Tsirkin
CHECK drivers/char/virtio_console.c drivers/char/virtio_console.c:687:36: warning: incorrect type in argument 1 (different address spaces) drivers/char/virtio_console.c:687:36: expected void [noderef] <asn:1>*to drivers/char/virtio_console.c:687:36: got char *out_buf drivers/char/virtio_console.c:790:35: warning: incorrect type in argument 2 (different address spaces) drivers/char/virtio_console.c:790:35: expected char *out_buf drivers/char/virtio_console.c:790:35: got char [noderef] <asn:1>*ubuf fill_readbuf is reused with both kernel and userspace pointers, depending on value of to_user flag. Tag address parameter as __user, and cast to/from regular pointer type when we know it's safe. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09virtio: drop VIRTIO_F_VERSION_1 from driversMichael S. Tsirkin
Core activates this bit automatically now, drop it from drivers that set it explicitly. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09virtio_console: virtio 1.0 supportMichael S. Tsirkin
Pretty straight-forward, just use accessors for all fields. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09virtio: use u32, not bitmap for featuresMichael S. Tsirkin
It seemed like a good idea to use bitmap for features in struct virtio_device, but it's actually a pain, and seems to become even more painful when we get more than 32 feature bits. Just change it to a u32 for now. Based on patch by Rusty. Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-04hwrandom / exynos / PM: Use CONFIG_PM in #ifdefRafael J. Wysocki
CONFIG_PM is defined as the alternative of CONFIG_PM_RUNTIME and CONFIG_PM_SLEEP, so it can be used instead of that. Besides, after commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so using the alternative isn't even necessary. Use CONFIG_PM instead of it in drivers/char/hw_random/exynos-rng.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-02Merge tag 'v3.18-rc7' into drm-nextDave Airlie
This fixes a bunch of conflicts prior to merging i915 tree. Linux 3.18-rc7 Conflicts: drivers/gpu/drm/exynos/exynos_drm_drv.c drivers/gpu/drm/i915/i915_drv.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/tegra/dc.c
2014-11-26i8k: Fix temperature bug handling in i8k_get_temp()Pali Rohár
Static array prev[] was incorrectly initialized. It should be initialized to some "invalid" temperature value (above I8K_MAX_TEMP). Next, function should store "invalid" value to prev[] (above I8K_MAX_TEMP), not valid (= I8K_MAX_TEMP) because whole temperature bug handling will not work. And last part, to not break existing detection of temperature sensors, register them also if i8k report too high temperature (above I8K_MAX_TEMP). This is needed because some sensors are sometimes turned off (e.g sensor on GPU which can be turned off/on) and in this case SMM report too high value. To prevent reporting "invalid" values to userspace, return -EINVAL. In this case sensors which are currently turned off (e.g optimus/powerexpress/enduro gpu) are reported as "N/A" by lm-sensors package. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-20hwrng: atmel - add DT supportBoris Brezillon
Add DT support. Make the driver depend on CONFIG_OF as at91sam9g45 was the only SoC making use of the TRNG block and this SoC is now fully migrated to DT. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-20hwrng: atmel - use clk_prepapre_enable/_disable_unprepareBoris Brezillon
Use clk_prepare_enable/_disable_unprepare instead of clk_enable/disable to work properly with the CCF. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-14Revert "misc: always assign miscdevice to file->private_data in open()"Greg Kroah-Hartman
This reverts commit 32eca22180804f71b06b63fd29b72f58be8b3c47. Changing core kernel code to operate in a different manner, without a build-time breakage is tough to do and ensure you got it right. There are lots of problems popping up due to this change, so let's revert it for now as it is not safe to merge to the tree at this point in time. Cc: Martin Kepplinger <martink@posteo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14Revert "char: misc: document behaviour of open()"Greg Kroah-Hartman
This reverts commit 965ab29ba09d75056a6c9b0f707cd1c2cc91188f. This is causing way more problems than it is worth. Cc: Martin Kepplinger <martink@posteo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-13Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio bugfix from Michael S Tsirkin: "This fixes a crash in virtio console multi-channel mode that got introduced in -rc1" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_console: move early VQ enablement
2014-11-13virtio_console: move early VQ enablementCornelia Huck
Commit f5866db6 (virtio_console: enable VQs early) tried to make sure that DRIVER_OK was set when virtio_console started using its virtqueues. Doing this in add_port(), however, means that we try to set DRIVER_OK again when when a port is dynamically added after the probe function is done. Let's move virtio_device_ready() to the probe function just before trying to use the virtqueues instead. This is fine as nothing can fail inbetween. Reported-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto fixes from Herbert Xu: - stack corruption fix for pseries hwrng driver - add missing DMA unmap in caam crypto driver - fix NUMA crash in qat crypto driver - fix buggy mapping of zero-length associated data in qat crypto driver * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: hwrng: pseries - port to new read API and fix stack corruption crypto: caam - fix missing dma unmap on error path crypto: qat - Enforce valid numa configuration crypto: qat - Prevent dma mapping zero length assoc data
2014-11-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxHerbert Xu
Merging 3.18-rc4 in order to pick up the memzero_explicit helper.
2014-11-12Merge tag 'v3.18-rc4' into drm-nextDave Airlie
backmerge to get vmwgfx locking changes into next as the conflict with per-plane locking.
2014-11-10/dev/mem: Use more consistent data typesThierry Reding
The xlate_dev_{kmem,mem}_ptr() functions take either a physical address or a kernel virtual address, so data types should be phys_addr_t and void *. They both return a kernel virtual address which is only ever used in calls to copy_{from,to}_user(), so make variables that store it void * rather than char * for consistency. Also only define a weak unxlate_dev_mem_ptr() function if architectures haven't overridden them in the asm/io.h header file. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-07hangcheck-timer: cleanup casting in hangcheck_init()Dan Carpenter
The 32 bit addition "(hangcheck_margin + hangcheck_tick)" could potentially overflow. It triggers a static checker warning to have an overflowed addition followed by a no-op cast. I have moved the cast so that the addition can't overflow. Also I removed the unneeded cast on the following line since both "hangcheck_tsc_margin" and "TIMER_FREQ" are already 64 bit types. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07char: misc: document behaviour of open()Martin Kepplinger
an open syscall now assignes file->private_data to a pointer to the miscdevice structure. This reminds driver developers not to duplicate code if they need this. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07misc: always assign miscdevice to file->private_data in open()Martin Kepplinger
As of now, a miscdevice driver has to provide an implementation of the open() file operation if it wants to have misc_open() assign a pointer to struct miscdevice to file->private_data for other file operations to use (given the user calls open()). This leads to situations where a miscdevice driver that doesn't need internal operations during open() has to implement open() that only returns immediately, in order to use the data in private_data in other fops. This provides consistent behaviour for miscdevice developers and will always provide the pointer in private_data. A driver's open() fop would, of course, just overwrite it, when using private_data itself. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>