summaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)Author
2019-09-29Merge branch 'entropy'Linus Torvalds
Merge active entropy generation updates. This is admittedly partly "for discussion". We need to have a way forward for the boot time deadlocks where user space ends up waiting for more entropy, but no entropy is forthcoming because the system is entirely idle just waiting for something to happen. While this was triggered by what is arguably a user space bug with GDM/gnome-session asking for secure randomness during early boot, when they didn't even need any such truly secure thing, the issue ends up being that our "getrandom()" interface is prone to that kind of confusion, because people don't think very hard about whether they want to block for sufficient amounts of entropy. The approach here-in is to decide to not just passively wait for entropy to happen, but to start actively collecting it if it is missing. This is not necessarily always possible, but if the architecture has a CPU cycle counter, there is a fair amount of noise in the exact timings of reasonably complex loads. We may end up tweaking the load and the entropy estimates, but this should be at least a reasonable starting point. As part of this, we also revert the revert of the ext4 IO pattern improvement that ended up triggering the reported lack of external entropy. * getrandom() active entropy waiting: Revert "Revert "ext4: make __ext4_get_inode_loc plug"" random: try to actively add entropy rather than passively wait for it
2019-09-29random: try to actively add entropy rather than passively wait for itLinus Torvalds
For 5.3 we had to revert a nice ext4 IO pattern improvement, because it caused a bootup regression due to lack of entropy at bootup together with arguably broken user space that was asking for secure random numbers when it really didn't need to. See commit 72dbcf721566 (Revert "ext4: make __ext4_get_inode_loc plug"). This aims to solve the issue by actively generating entropy noise using the CPU cycle counter when waiting for the random number generator to initialize. This only works when you have a high-frequency time stamp counter available, but that's the case on all modern x86 CPU's, and on most other modern CPU's too. What we do is to generate jitter entropy from the CPU cycle counter under a somewhat complex load: calling the scheduler while also guaranteeing a certain amount of timing noise by also triggering a timer. I'm sure we can tweak this, and that people will want to look at other alternatives, but there's been a number of papers written on jitter entropy, and this should really be fairly conservative by crediting one bit of entropy for every timer-induced jump in the cycle counter. Not because the timer itself would be all that unpredictable, but because the interaction between the timer and the loop is going to be. Even if (and perhaps particularly if) the timer actually happens on another CPU, the cacheline interaction between the loop that reads the cycle counter and the timer itself firing is going to add perturbations to the cycle counter values that get mixed into the entropy pool. As Thomas pointed out, with a modern out-of-order CPU, even quite simple loops show a fair amount of hard-to-predict timing variability even in the absense of external interrupts. But this tries to take that further by actually having a fairly complex interaction. This is not going to solve the entropy issue for architectures that have no CPU cycle counter, but it's not clear how (and if) that is solvable, and the hardware in question is largely starting to be irrelevant. And by doing this we can at least avoid some of the even more contentious approaches (like making the entropy waiting time out in order to avoid the possibly unbounded waiting). Cc: Ahmed Darwish <darwish.07@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Nicholas Mc Guire <hofrat@opentech.at> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Willy Tarreau <w@1wt.eu> Cc: Alexander E. Patrakov <patrakov@gmail.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-28Merge branch 'next-lockdown' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull kernel lockdown mode from James Morris: "This is the latest iteration of the kernel lockdown patchset, from Matthew Garrett, David Howells and others. From the original description: This patchset introduces an optional kernel lockdown feature, intended to strengthen the boundary between UID 0 and the kernel. When enabled, various pieces of kernel functionality are restricted. Applications that rely on low-level access to either hardware or the kernel may cease working as a result - therefore this should not be enabled without appropriate evaluation beforehand. The majority of mainstream distributions have been carrying variants of this patchset for many years now, so there's value in providing a doesn't meet every distribution requirement, but gets us much closer to not requiring external patches. There are two major changes since this was last proposed for mainline: - Separating lockdown from EFI secure boot. Background discussion is covered here: https://lwn.net/Articles/751061/ - Implementation as an LSM, with a default stackable lockdown LSM module. This allows the lockdown feature to be policy-driven, rather than encoding an implicit policy within the mechanism. The new locked_down LSM hook is provided to allow LSMs to make a policy decision around whether kernel functionality that would allow tampering with or examining the runtime state of the kernel should be permitted. The included lockdown LSM provides an implementation with a simple policy intended for general purpose use. This policy provides a coarse level of granularity, controllable via the kernel command line: lockdown={integrity|confidentiality} Enable the kernel lockdown feature. If set to integrity, kernel features that allow userland to modify the running kernel are disabled. If set to confidentiality, kernel features that allow userland to extract confidential information from the kernel are also disabled. This may also be controlled via /sys/kernel/security/lockdown and overriden by kernel configuration. New or existing LSMs may implement finer-grained controls of the lockdown features. Refer to the lockdown_reason documentation in include/linux/security.h for details. The lockdown feature has had signficant design feedback and review across many subsystems. This code has been in linux-next for some weeks, with a few fixes applied along the way. Stephen Rothwell noted that commit 9d1f8be5cf42 ("bpf: Restrict bpf when kernel lockdown is in confidentiality mode") is missing a Signed-off-by from its author. Matthew responded that he is providing this under category (c) of the DCO" * 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits) kexec: Fix file verification on S390 security: constify some arrays in lockdown LSM lockdown: Print current->comm in restriction messages efi: Restrict efivar_ssdt_load when the kernel is locked down tracefs: Restrict tracefs when the kernel is locked down debugfs: Restrict debugfs when the kernel is locked down kexec: Allow kexec_file() with appropriate IMA policy when locked down lockdown: Lock down perf when in confidentiality mode bpf: Restrict bpf when kernel lockdown is in confidentiality mode lockdown: Lock down tracing and perf kprobes when in confidentiality mode lockdown: Lock down /proc/kcore x86/mmiotrace: Lock down the testmmiotrace module lockdown: Lock down module params that specify hardware parameters (eg. ioport) lockdown: Lock down TIOCSSERIAL lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down acpi: Disable ACPI table override if the kernel is locked down acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down ACPI: Limit access to custom_method when the kernel is locked down x86/msr: Restrict MSR access when the kernel is locked down x86: Lock down IO port access when the kernel is locked down ...
2019-09-25tpm: Wrap the buffer from the caller to tpm_buf in tpm_send()Jarkko Sakkinen
tpm_send() does not give anymore the result back to the caller. This would require another memcpy(), which kind of tells that the whole approach is somewhat broken. Instead, as Mimi suggested, this commit just wraps the data to the tpm_buf, and thus the result will not go to the garbage. Obviously this assumes from the caller that it passes large enough buffer, which makes the whole API somewhat broken because it could be different size than @buflen but since trusted keys is the only module using this API right now I think that this fix is sufficient for the moment. In the near future the plan is to replace the parameters with a tpm_buf created by the caller. Reported-by: Mimi Zohar <zohar@linux.ibm.com> Suggested-by: Mimi Zohar <zohar@linux.ibm.com> Cc: stable@vger.kernel.org Fixes: 412eb585587a ("use tpm_buf in tpm_transmit_cmd() as the IO parameter") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
2019-09-25KEYS: trusted: correctly initialize digests and fix locking issueRoberto Sassu
Commit 0b6cf6b97b7e ("tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()") modifies tpm_pcr_extend() to accept a digest for each PCR bank. After modification, tpm_pcr_extend() expects that digests are passed in the same order as the algorithms set in chip->allocated_banks. This patch fixes two issues introduced in the last iterations of the patch set: missing initialization of the TPM algorithm ID in the tpm_digest structures passed to tpm_pcr_extend() by the trusted key module, and unreleased locks in the TPM driver due to returning from tpm_pcr_extend() without calling tpm_put_ops(). Cc: stable@vger.kernel.org Fixes: 0b6cf6b97b7e ("tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()") Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-23Merge tag 'pci-v5.4-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...
2019-09-23Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes froim Herbert Xu: "This fixes the following issues: - potential boot hang in hwrng - missing switch/break in talitos - bugs and warnings in hisilicon - build warning in inside-secure" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: hisilicon - avoid unused function warning hwrng: core - don't wait on add_early_randomness() crypto: hisilicon - Fix return value check in hisi_zip_acompress() crypto: hisilicon - Matching the dma address for dma_pool_free() crypto: hisilicon - Fix double free in sec_free_hw_sgl() crypto: inside-secure - Fix unused variable warning when CONFIG_PCI=n crypto: talitos - fix missing break in switch statement
2019-09-20hwrng: core - don't wait on add_early_randomness()Laurent Vivier
add_early_randomness() is called by hwrng_register() when the hardware is added. If this hardware and its module are present at boot, and if there is no data available the boot hangs until data are available and can't be interrupted. For instance, in the case of virtio-rng, in some cases the host can be not able to provide enough entropy for all the guests. We can have two easy ways to reproduce the problem but they rely on misconfiguration of the hypervisor or the egd daemon: - if virtio-rng device is configured to connect to the egd daemon of the host but when the virtio-rng driver asks for data the daemon is not connected, - if virtio-rng device is configured to connect to the egd daemon of the host but the egd daemon doesn't provide data. The guest kernel will hang at boot until the virtio-rng driver provides enough data. To avoid that, call rng_get_data() in non-blocking mode (wait=0) from add_early_randomness(). Signed-off-by: Laurent Vivier <lvivier@redhat.com> Fixes: d9e797261933 ("hwrng: add randomness to system from rng...") Cc: <stable@vger.kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-19Merge tag 'for-linus-5.4-1' of git://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI updates from Corey Minyard: "A few minor fixes and some cosmetic changes. Nothing big here, but some minor things that people have found and some minor reworks for names and include files" * tag 'for-linus-5.4-1' of git://github.com/cminyard/linux-ipmi: ipmi_si_intf: Fix race in timer shutdown handling ipmi: move message error checking to avoid deadlock ipmi_ssif: avoid registering duplicate ssif interface ipmi: Free receive messages when in an oops ipmi_si: Only schedule continuously in the thread in maintenance mode ipmi_si: Remove ipmi_ from the device attr names ipmi_si: Convert device attr permissions to octal ipmi_si: Rework some include files ipmi_si: Convert timespec64 to timespec
2019-09-18Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add the ability to abort a skcipher walk. Algorithms: - Fix XTS to actually do the stealing. - Add library helpers for AES and DES for single-block users. - Add library helpers for SHA256. - Add new DES key verification helper. - Add surrounding bits for ESSIV generator. - Add accelerations for aegis128. - Add test vectors for lzo-rle. Drivers: - Add i.MX8MQ support to caam. - Add gcm/ccm/cfb/ofb aes support in inside-secure. - Add ofb/cfb aes support in media-tek. - Add HiSilicon ZIP accelerator support. Others: - Fix potential race condition in padata. - Use unbound workqueues in padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (311 commits) crypto: caam - Cast to long first before pointer conversion crypto: ccree - enable CTS support in AES-XTS crypto: inside-secure - Probe transform record cache RAM sizes crypto: inside-secure - Base RD fetchcount on actual RD FIFO size crypto: inside-secure - Base CD fetchcount on actual CD FIFO size crypto: inside-secure - Enable extended algorithms on newer HW crypto: inside-secure: Corrected configuration of EIP96_TOKEN_CTRL crypto: inside-secure - Add EIP97/EIP197 and endianness detection padata: remove cpu_index from the parallel_queue padata: unbind parallel jobs from specific CPUs padata: use separate workqueues for parallel and serial work padata, pcrypt: take CPU hotplug lock internally in padata_alloc_possible crypto: pcrypt - remove padata cpumask notifier padata: make padata_do_parallel find alternate callback CPU workqueue: require CPU hotplug read exclusion for apply_workqueue_attrs workqueue: unconfine alloc/apply/free_workqueue_attrs() padata: allocate workqueue internally arm64: dts: imx8mq: Add CAAM node random: Use wait_event_freezable() in add_hwgenerator_randomness() crypto: ux500 - Fix COMPILE_TEST warnings ...
2019-09-18Merge tag 'char-misc-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver pull request for 5.4-rc1. As has been happening in previous releases, more and more individual driver subsystem trees are ending up in here. Now if that is good or bad I can't tell, but hopefully it makes your life easier as it's more of an aggregation of trees together to one merge point for you. Anyway, lots of stuff in here: - habanalabs driver updates - thunderbolt driver updates - misc driver updates - coresight and intel_th hwtracing driver updates - fpga driver updates - extcon driver updates - some dma driver updates - char driver updates - android binder driver updates - nvmem driver updates - phy driver updates - parport driver fixes - pcmcia driver fix - uio driver updates - w1 driver updates - configfs fixes - other assorted driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits) misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation habanalabs: correctly cast variable to __le32 habanalabs: show correct id in error print habanalabs: stop using the acronym KMD habanalabs: display card name as sensors header habanalabs: add uapi to retrieve aggregate H/W events habanalabs: add uapi to retrieve device utilization habanalabs: Make the Coresight timestamp perpetual habanalabs: explicitly set the queue-id enumerated numbers habanalabs: print to kernel log when reset is finished habanalabs: replace __le32_to_cpu with le32_to_cpu habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64 habanalabs: Handle HW_IP_INFO if device disabled or in reset habanalabs: Expose devices after initialization is done habanalabs: improve security in Debug IOCTL habanalabs: use default structure for user input in Debug IOCTL habanalabs: Add descriptive name to PSOC app status register habanalabs: Add descriptive names to PSOC scratch-pad registers habanalabs: create two char devices per ASIC habanalabs: change device_setup_cdev() to be more generic ...
2019-09-16Merge tag 'please-pull-ia64_for_5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 updates from Tony Luck: "The big change here is removal of support for SGI Altix" * tag 'please-pull-ia64_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: (33 commits) genirq: remove the is_affinity_mask_valid hook ia64: remove CONFIG_SWIOTLB ifdefs ia64: remove support for machvecs ia64: move the screen_info setup to common code ia64: move the ROOT_DEV setup to common code ia64: rework iommu probing ia64: remove the unused sn_coherency_id symbol ia64: remove the SGI UV simulator support ia64: remove the zx1 swiotlb machvec ia64: remove CONFIG_ACPI ifdefs ia64: remove CONFIG_PCI ifdefs ia64: remove the hpsim platform ia64: remove now unused machvec indirections ia64: remove support for the SGI SN2 platform drivers: remove the SGI SN2 IOC4 base support drivers: remove the SGI SN2 IOC3 base support qla2xxx: remove SGI SN2 support qla1280: remove SGI SN2 support misc/sgi-xp: remove SGI SN2 support char/mspec: remove SGI SN2 support ...
2019-09-16Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "Although there isn't tonnes of code in terms of line count, there are a fair few headline features which I've noted both in the tag and also in the merge commits when I pulled everything together. The part I'm most pleased with is that we had 35 contributors this time around, which feels like a big jump from the usual small group of core arm64 arch developers. Hopefully they all enjoyed it so much that they'll continue to contribute, but we'll see. It's probably worth highlighting that we've pulled in a branch from the risc-v folks which moves our CPU topology code out to where it can be shared with others. Summary: - 52-bit virtual addressing in the kernel - New ABI to allow tagged user pointers to be dereferenced by syscalls - Early RNG seeding by the bootloader - Improve robustness of SMP boot - Fix TLB invalidation in light of recent architectural clarifications - Support for i.MX8 DDR PMU - Remove direct LSE instruction patching in favour of static keys - Function error injection using kprobes - Support for the PPTT "thread" flag introduced by ACPI 6.3 - Move PSCI idle code into proper cpuidle driver - Relaxation of implicit I/O memory barriers - Build with RELR relocations when toolchain supports them - Numerous cleanups and non-critical fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (114 commits) arm64: remove __iounmap arm64: atomics: Use K constraint when toolchain appears to support it arm64: atomics: Undefine internal macros after use arm64: lse: Make ARM64_LSE_ATOMICS depend on JUMP_LABEL arm64: asm: Kill 'asm/atomic_arch.h' arm64: lse: Remove unused 'alt_lse' assembly macro arm64: atomics: Remove atomic_ll_sc compilation unit arm64: avoid using hard-coded registers for LSE atomics arm64: atomics: avoid out-of-line ll/sc atomics arm64: Use correct ll/sc atomic constraints jump_label: Don't warn on __exit jump entries docs/perf: Add documentation for the i.MX8 DDR PMU perf/imx_ddr: Add support for AXI ID filtering arm64: kpti: ensure patched kernel text is fetched from PoU arm64: fix fixmap copy for 16K pages and 48-bit VA perf/smmuv3: Validate groups for global filtering perf/smmuv3: Validate group size arm64: Relax Documentation/arm64/tagged-pointers.rst arm64: kvm: Replace hardcoded '1' with SYS_PAR_EL1_F arm64: mm: Ignore spurious translation faults taken from the kernel ...
2019-09-12ipmi_si_intf: Fix race in timer shutdown handlingJes Sorensen
smi_mod_timer() enables the timer before setting timer_running. This means the timer can be running when we get to stop_timer_and_thread() without timer_running having been set, resulting in del_timer_sync() not being called and the timer being left to cause havoc during shutdown. Instead just call del_timer_sync() unconditionally Signed-off-by: Jes Sorensen <jsorensen@fb.com> Message-Id: <20190828203625.32093-2-Jes.Sorensen@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-09-09random: Use wait_event_freezable() in add_hwgenerator_randomness()Stephen Boyd
Sebastian reports that after commit ff296293b353 ("random: Support freezable kthreads in add_hwgenerator_randomness()") we can call might_sleep() when the task state is TASK_INTERRUPTIBLE (state=1). This leads to the following warning. do not call blocking ops when !TASK_RUNNING; state=1 set at [<00000000349d1489>] prepare_to_wait_event+0x5a/0x180 WARNING: CPU: 0 PID: 828 at kernel/sched/core.c:6741 __might_sleep+0x6f/0x80 Modules linked in: CPU: 0 PID: 828 Comm: hwrng Not tainted 5.3.0-rc7-next-20190903+ #46 RIP: 0010:__might_sleep+0x6f/0x80 Call Trace: kthread_freezable_should_stop+0x1b/0x60 add_hwgenerator_randomness+0xdd/0x130 hwrng_fillfn+0xbf/0x120 kthread+0x10c/0x140 ret_from_fork+0x27/0x50 We shouldn't call kthread_freezable_should_stop() from deep within the wait_event code because the task state is still set as TASK_INTERRUPTIBLE instead of TASK_RUNNING and kthread_freezable_should_stop() will try to call into the freezer with the task in the wrong state. Use wait_event_freezable() instead so that it calls schedule() in the right place and tries to enter the freezer when the task state is TASK_RUNNING instead. Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Keerthy <j-keerthy@ti.com> Fixes: ff296293b353 ("random: Support freezable kthreads in add_hwgenerator_randomness()") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-05hwrng: timeriomem - relax check on memory resource sizeDaniel Mack
The timeriomem_rng driver only accesses the first 4 bytes of the given memory area and currently, it also forces that memory resource to be exactly 4 bytes in size. This, however, is problematic when used with device-trees that are generated from things like FPGA toolchains, where the minimum size of an exposed memory block may be something like 4k. Hence, let's only check for what's needed for the driver to operate properly; namely that we have enough memory available to read the random data from. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-04toshiba: Add correct printk log level while emitting error logRishi Gupta
The printk functions are invoked without specifying required log level when printing error messages. This commit replaces all direct uses of printk with their corresponding pr_err/info/debug variant. Signed-off-by: Rishi Gupta <gupt21@gmail.com> Link: https://lore.kernel.org/r/1566113671-8743-1-git-send-email-gupt21@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04/dev/mem: Bail out upon SIGKILL.Tetsuo Handa
syzbot found that a thread can stall for minutes inside read_mem() or write_mem() after that thread was killed by SIGKILL [1]. Reading from iomem areas of /dev/mem can be slow, depending on the hardware. While reading 2GB at one read() is legal, delaying termination of killed thread for minutes is bad. Thus, allow reading/writing /dev/mem and /dev/kmem to be preemptible and killable. [ 1335.912419][T20577] read_mem: sz=4096 count=2134565632 [ 1335.943194][T20577] read_mem: sz=4096 count=2134561536 [ 1335.978280][T20577] read_mem: sz=4096 count=2134557440 [ 1336.011147][T20577] read_mem: sz=4096 count=2134553344 [ 1336.041897][T20577] read_mem: sz=4096 count=2134549248 Theoretically, reading/writing /dev/mem and /dev/kmem can become "interruptible". But this patch chose "killable". Future patch will make them "interruptible" so that we can revert to "killable" if some program regressed. [1] https://syzkaller.appspot.com/bug?id=a0e3436829698d5824231251fad9d8e998f94f5e Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@vger.kernel.org> Reported-by: syzbot <syzbot+8ab2d0f39fb79fe6ca40@syzkaller.appspotmail.com> Link: https://lore.kernel.org/r/1566825205-10703-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-02tpm/tpm_ftpm_tee: A driver for firmware TPM running inside TEESasha Levin
Add a driver for a firmware TPM running inside TEE. Documentation of the firmware TPM: https://www.microsoft.com/en-us/research/publication/ftpm-software-implementation-tpm-chip/ . Implementation of the firmware TPM: https://github.com/Microsoft/ms-tpm-20-ref/tree/master/Samples/ARM32-FirmwareTPM Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Tested-by: Thirupathaiah Annapureddy <thiruan@microsoft.com> Signed-off-by: Thirupathaiah Annapureddy <thiruan@microsoft.com> Co-authored-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-02tpm: Remove a deprecated comments about implicit sysfs lockingJarkko Sakkinen
Remove all comments about implicit locking tpm-sysfs.c as the file was updated in Linux v5.1 to use explicit locking. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-02tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interruptsStefan Berger
The tpm_tis_core has to set the TPM_CHIP_FLAG_IRQ before probing for interrupts since there is no other place in the code that would set it. Cc: linux-stable@vger.kernel.org Fixes: 570a36097f30 ("tpm: drop 'irq' from struct tpm_vendor_specific") Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-02tpm_tis_core: Turn on the TPM before probing IRQ'sStefan Berger
The interrupt probing sequence in tpm_tis_core cannot obviously run with the TPM power gated. Power on the TPM with tpm_chip_start() before probing IRQ's. Turn it off once the probing is complete. Cc: linux-stable@vger.kernel.org Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()") Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-08-28PCI: Move ASPM declarations to linux/pci.hKrzysztof Wilczynski
Move ASPM definitions and function prototypes from include/linux/pci-aspm.h to include/linux/pci.h so users only need to include <linux/pci.h>: PCIE_LINK_STATE_L0S PCIE_LINK_STATE_L1 PCIE_LINK_STATE_CLKPM pci_disable_link_state() pci_disable_link_state_locked() pcie_no_aspm() No functional changes intended. Link: https://lore.kernel.org/r/20190827095620.11213-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-23fdt: add support for rng-seedHsin-Yi Wang
Introducing a chosen node, rng-seed, which is an entropy that can be passed to kernel called very early to increase initial device randomness. Bootloader should provide this entropy and the value is read from /chosen/rng-seed in DT. Obtain of_fdt_crc32 for CRC check after early_init_dt_scan_nodes(), since early_init_dt_scan_chosen() would modify fdt to erase rng-seed. Add a new interface add_bootloader_randomness() for rng-seed use case. Depends on whether the seed is trustworthy, rng seed would be passed to add_hwgenerator_randomness(). Otherwise it would be passed to add_device_randomness(). Decision is controlled by kernel config RANDOM_TRUST_BOOTLOADER. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> # drivers/char/random.c Signed-off-by: Will Deacon <will@kernel.org>
2019-08-22ipmi: move message error checking to avoid deadlockTony Camuso
V1->V2: in handle_one_rcv_msg, if data_size > 2, set requeue to zero and goto out instead of calling ipmi_free_msg. Kosuke Tatsukawa <tatsu@ab.jp.nec.com> In the source stack trace below, function set_need_watch tries to take out the same si_lock that was taken earlier by ipmi_thread. ipmi_thread() [drivers/char/ipmi/ipmi_si_intf.c:995] smi_event_handler() [drivers/char/ipmi/ipmi_si_intf.c:765] handle_transaction_done() [drivers/char/ipmi/ipmi_si_intf.c:555] deliver_recv_msg() [drivers/char/ipmi/ipmi_si_intf.c:283] ipmi_smi_msg_received() [drivers/char/ipmi/ipmi_msghandler.c:4503] intf_err_seq() [drivers/char/ipmi/ipmi_msghandler.c:1149] smi_remove_watch() [drivers/char/ipmi/ipmi_msghandler.c:999] set_need_watch() [drivers/char/ipmi/ipmi_si_intf.c:1066] Upstream commit e1891cffd4c4896a899337a243273f0e23c028df adds code to ipmi_smi_msg_received() to call smi_remove_watch() via intf_err_seq() and this seems to be causing the deadlock. commit e1891cffd4c4896a899337a243273f0e23c028df Author: Corey Minyard <cminyard@mvista.com> Date: Wed Oct 24 15:17:04 2018 -0500 ipmi: Make the smi watcher be disabled immediately when not needed The fix is to put all messages in the queue and move the message checking code out of ipmi_smi_msg_received and into handle_one_recv_msg, which processes the message checking after ipmi_thread releases its locks. Additionally,Kosuke Tatsukawa <tatsu@ab.jp.nec.com> reported that handle_new_recv_msgs calls ipmi_free_msg when handle_one_rcv_msg returns zero, so that the call to ipmi_free_msg in handle_one_rcv_msg introduced another panic when "ipmitool sensor list" was run in a loop. He submitted this part of the patch. +free_msg: + requeue = 0; + goto out; Reported by: Osamu Samukawa <osa-samukawa@tg.jp.nec.com> Characterized by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Signed-off-by: Tony Camuso <tcamuso@redhat.com> Fixes: e1891cffd4c4 ("ipmi: Make the smi watcher be disabled immediately when not needed") Cc: stable@vger.kernel.org # 5.1 Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-08-22ipmi_ssif: avoid registering duplicate ssif interfaceKamlakant Patel
It is possible that SSIF interface entry is present in both DMI and ACPI tables. In SMP systems, in such cases it is possible that ssif_probe could be called simultaneously from i2c interface (from ACPI) and from DMI on different CPUs at kernel boot. Both try to register same SSIF interface simultaneously and result in race. In such cases where ACPI and SMBIOS both IPMI entries are available, we need to prefer ACPI over SMBIOS so that ACPI functions work properly if they use IPMI. So, if we get an ACPI interface and have already registered an SMBIOS at the same address, we need to remove the SMBIOS one and add the ACPI. Log: [ 38.774743] ipmi device interface [ 38.805006] ipmi_ssif: IPMI SSIF Interface driver [ 38.861979] ipmi_ssif i2c-IPI0001:06: ssif_probe CPU 99 *** [ 38.863655] ipmi_ssif 0-000e: ssif_probe CPU 14 *** [ 38.863658] ipmi_ssif: Trying SMBIOS-specified SSIF interface at i2c address 0xe, adapter xlp9xx-i2c, slave address 0x0 [ 38.869500] ipmi_ssif: Trying ACPI-specified SSIF interface at i2c address 0xe, adapter xlp9xx-i2c, slave address 0x0 [ 38.914530] ipmi_ssif: Unable to clear message flags: -22 7 c7 [ 38.952429] ipmi_ssif: Unable to clear message flags: -22 7 00 [ 38.994734] ipmi_ssif: Error getting global enables: -22 7 00 [ 39.015877] ipmi_ssif 0-000e: IPMI message handler: Found new BMC (man_id: 0x00b3d1, prod_id: 0x0001, dev_id: 0x20) [ 39.377645] ipmi_ssif i2c-IPI0001:06: IPMI message handler: Found new BMC (man_id: 0x00b3d1, prod_id: 0x0001, dev_id: 0x20) [ 39.387863] ipmi_ssif 0-000e: IPMI message handler: BMC returned incorrect response, expected netfn 7 cmd 42, got netfn 7 cmd 1 ... [NOTE] : Added custom prints to explain the problem. In the above log, ssif_probe is executed simultaneously on two different CPUs. This patch fixes this issue in following way: - Adds ACPI entry also to the 'ssif_infos' list. - Checks the list if SMBIOS is already registered, removes it and adds ACPI. - If ACPI is already registered, it ignores SMBIOS. - Adds mutex lock throughout the probe process to avoid race. Signed-off-by: Kamlakant Patel <kamlakantp@marvell.com> Message-Id: <1566389064-27356-1-git-send-email-kamlakantp@marvell.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-08-22random: Support freezable kthreads in add_hwgenerator_randomness()Stephen Boyd
The kthread calling this function is freezable after commit 03a3bb7ae631 ("hwrng: core - Freeze khwrng thread during suspend") is applied. Unfortunately, this function uses wait_event_interruptible() but doesn't check for the kthread being woken up by the fake freezer signal. When a user suspends the system, this kthread will wake up and if it fails the entropy size check it will immediately go back to sleep and not go into the freezer. Eventually, suspend will fail because the task never froze and a warning message like this may appear: PM: suspend entry (deep) Filesystems sync: 0.000 seconds Freezing user space processes ... (elapsed 0.001 seconds) done. OOM killer disabled. Freezing remaining freezable tasks ... Freezing of tasks failed after 20.003 seconds (1 tasks refusing to freeze, wq_busy=0): hwrng R running task 0 289 2 0x00000020 [<c08c64c4>] (__schedule) from [<c08c6a10>] (schedule+0x3c/0xc0) [<c08c6a10>] (schedule) from [<c05dbd8c>] (add_hwgenerator_randomness+0xb0/0x100) [<c05dbd8c>] (add_hwgenerator_randomness) from [<bf1803c8>] (hwrng_fillfn+0xc0/0x14c [rng_core]) [<bf1803c8>] (hwrng_fillfn [rng_core]) from [<c015abec>] (kthread+0x134/0x148) [<c015abec>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Check for a freezer signal here and skip adding any randomness if the task wakes up because it was frozen. This should make the kthread freeze properly and suspend work again. Fixes: 03a3bb7ae631 ("hwrng: core - Freeze khwrng thread during suspend") Reported-by: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-19lockdown: Restrict /dev/{mem,kmem,port} when the kernel is locked downMatthew Garrett
Allowing users to read and write to core kernel memory makes it possible for the kernel to be subverted, avoiding module loading restrictions, and also to steal cryptographic information. Disallow /dev/mem and /dev/kmem from being opened this when the kernel has been locked down to prevent this. Also disallow /dev/port from being opened to prevent raw ioport access and thus DMA from being used to accomplish the same thing. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Garrett <mjg59@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: x86@kernel.org Signed-off-by: James Morris <jmorris@namei.org>
2019-08-16ia64: remove support for machvecsChristoph Hellwig
The only thing remaining of the machvecs is a few checks if we are running on an SGI UV system. Replace those with the existing is_uv_system() check that has been rewritten to simply check the OEM ID directly. That leaves us with a generic kernel that is as fast as the previous DIG/ZX1/UV kernels, but can support all hardware. Support for UV and the HP SBA IOMMU is now optional based on new config options. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-27-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-16ipmi: Free receive messages when in an oopsCorey Minyard
If the driver handles a response in an oops, it was just ignoring the message. However, the IPMI watchdog timer was counting on the free happening to know when panic-time messages were complete. So free it in all cases. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-08-16ia64: remove the zx1 swiotlb machvecChristoph Hellwig
The aim of this machvec is to support devices with < 32-bit dma masks. But given that ia64 only has a ZONE_DMA32 and not a ZONE_DMA that isn't supported by swiotlb either. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-21-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-16char/mspec: remove SGI SN2 supportChristoph Hellwig
The SGI SN2 support is about to be removed, so drop the bits specific to it from this driver. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-10-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-16char/agp: remove the sgi-agp driverChristoph Hellwig
The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-4-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-16char: remove the SGI tiocx/mbcs driverChristoph Hellwig
The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-3-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-16char: remove the SGI snsc driverChristoph Hellwig
The SGI SN2 support is about to be removed. Remove this driver that depends on the SN2 support. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-2-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-15hwrng: core - Freeze khwrng thread during suspendStephen Boyd
The hwrng_fill() function can run while devices are suspending and resuming. If the hwrng is behind a bus such as i2c or SPI and that bus is suspended, the hwrng may hang the bus while attempting to add some randomness. It's been observed on ChromeOS devices with suspend-to-idle (s2idle) and an i2c based hwrng that this kthread may run and ask the hwrng device for randomness before the i2c bus has been resumed. Let's make this kthread freezable so that we don't try to touch the hwrng during suspend/resume. This ensures that we can't cause the hwrng backing driver to get into a bad state because the device is guaranteed to be resumed before the hwrng kthread is thawed. Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-12Merge 5.3-rc4 into char-misc-nextGreg Kroah-Hartman
We need the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-08hwrng: n2-drv - fix typoStephen Rothwell
Fixes: 3e75241be808 ("hwrng: drivers - Use device-managed registration API") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-05ipmi_si: Only schedule continuously in the thread in maintenance modeCorey Minyard
ipmi_thread() uses back-to-back schedule() to poll for command completion which, on some machines, can push up CPU consumption and heavily tax the scheduler locks leading to noticeable overall performance degradation. This was originally added so firmware updates through IPMI would complete in a timely manner. But we can't kill the scheduler locks for that one use case. Instead, only run schedule() continuously in maintenance mode, where firmware updates should run. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-08-05tpm: tpm_ibm_vtpm: Fix unallocated banksNayna Jain
The nr_allocated_banks and allocated banks are initialized as part of tpm_chip_register. Currently, this is done as part of auto startup function. However, some drivers, like the ibm vtpm driver, do not run auto startup during initialization. This results in uninitialized memory issue and causes a kernel panic during boot. This patch moves the pcr allocation outside the auto startup function into tpm_chip_register. This ensures that allocated banks are initialized in any case. Fixes: 879b589210a9 ("tpm: retrieve digest size of unknown algorithms with PCR read") Reported-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Tested-by: Michal Suchánek <msuchanek@suse.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-08-05tpm: Fix null pointer dereference on chip register error pathMilan Broz
If clk_enable is not defined and chip initialization is canceled code hits null dereference. Easily reproducible with vTPM init fail: swtpm chardev --tpmstate dir=nonexistent_dir --tpm2 --vtpm-proxy BUG: kernel NULL pointer dereference, address: 00000000 ... Call Trace: tpm_chip_start+0x9d/0xa0 [tpm] tpm_chip_register+0x10/0x1a0 [tpm] vtpm_proxy_work+0x11/0x30 [tpm_vtpm_proxy] process_one_work+0x214/0x5a0 worker_thread+0x134/0x3e0 ? process_one_work+0x5a0/0x5a0 kthread+0xd4/0x100 ? process_one_work+0x5a0/0x5a0 ? kthread_park+0x90/0x90 ret_from_fork+0x19/0x24 Fixes: 719b7d81f204 ("tpm: introduce tpm_chip_start() and tpm_chip_stop()") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-08-02ipmi_si: Remove ipmi_ from the device attr namesCorey Minyard
Better conform with kernel style. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-08-02ipmi_si: Convert device attr permissions to octalCorey Minyard
Kernel preferences are for octal values instead of symbols. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-08-02ipmi_si: Rework some include filesCorey Minyard
ipmi_si_sm.h was getting included in lots of places it didn't belong. Rework things a bit to remove all the dependencies, mostly just moving things between include files that were in the wrong place and removing bogus includes. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-08-02hwrng: drivers - Use device-managed registration APIChuhong Yuan
Use devm_hwrng_register to simplify the implementation. Manual unregistration and some remove functions can be removed now. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-31ipmi_si: Convert timespec64 to timespecCorey Minyard
There is no need for timespec64, and it will cause issues in the future with i386 and 64-bit division not being available. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-07-31Merge tag 'for-linus-5.3-2' of git://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI fix from Corey Minyard: "One necessary fix for an uninitialized variable in the new IPMB driver. Nothing else has come in besides things that need to wait until later" * tag 'for-linus-5.3-2' of git://github.com/cminyard/linux-ipmi: Fix uninitialized variable in ipmb_dev_int.c
2019-07-29Merge 5.3-rc2 into char-misc-nextGreg Kroah-Hartman
We want the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-27hwrng: mxc-rnga - use devm_platform_ioremap_resource() to simplify codeAnson Huang
Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-27hwrng: imx-rngc - use devm_platform_ioremap_resource() to simplify codeAnson Huang
Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>