summaryrefslogtreecommitdiff
path: root/drivers/clk/bcm
AgeCommit message (Collapse)Author
2021-10-25clk: bcm-2835: Remove rounding up the dividersMaxime Ripard
The driver, once it found a divider, tries to round it up by increasing the least significant bit of the fractional part by one when the round_up argument is set and there's a remainder. However, since it increases the divider it will actually reduce the clock rate below what we were asking for, leading to issues with clk_set_min_rate() that will complain that our rounded clock rate is below the minimum of the rate. Since the dividers are fairly precise already, let's remove that part so that we can have clk_set_min_rate() working. This is effectively a revert of 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor"). Fixes: 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality Tested-by: Michael Stapelberg <michael@stapelberg.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-3-maxime@cerno.tech
2021-10-25clk: bcm-2835: Pick the closest clock rateMaxime Ripard
The driver currently tries to pick the closest rate that is lower than the rate being requested. This causes an issue with clk_set_min_rate() since it actively checks for the rounded rate to be above the minimum that was just set. Let's change the logic a bit to pick the closest rate to the requested rate, no matter if it's actually higher or lower. Fixes: 6d18b8adbe67 ("clk: bcm2835: Support for clock parent selection") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality Tested-by: Michael Stapelberg <michael@stapelberg.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-2-maxime@cerno.tech
2021-08-05clk: bcm2835: Switch to clk_divider.determine_rateMartin Blumenstingl
.determine_rate is meant to replace .round_rate in CCF in the future. Switch over to .determine_rate now that clk_divider_ops has gained support for that. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-rpi-kernel@lists.infradead.org Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210702225145.2643303-4-martin.blumenstingl@googlemail.com Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-03-22clk: bcm: rpi: Release firmware handle on unbindNicolas Saenz Julienne
Use devm_rpi_firmware_get() so as to make sure we release RPi's firmware interface when unbinding the device. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> drivers/clk/bcm/clk-raspberrypi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
2021-02-11clk: bcm: clk-iproc-pll: Demote kernel-doc abuseLee Jones
Fixes the following W=1 kernel build warning(s): drivers/clk/bcm/clk-iproc-pll.c:712: warning: Function parameter or member 'pll' not described in 'iproc_pll_sw_cfg' Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-6-lee.jones@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: bcm: dvp: Add MODULE_DEVICE_TABLE()Nicolas Saenz Julienne
Add MODULE_DEVICE_TABLE() so as to be able to use the driver as a module. More precisely, for the driver to be loaded automatically at boot. Fixes: 1bc95972715a ("clk: bcm: Add BCM2711 DVP driver") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20201202103518.21889-1-nsaenzjulienne@suse.de Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: bcm: dvp: drop a variable that is assigned to onlyUwe Kleine-König
The third parameter to devm_platform_get_and_ioremap_resource() is used only to provide the used resource. As this variable isn't used afterwards, switch to the function devm_platform_ioremap_resource() which doesn't provide this output parameter. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20201120132121.2678997-1-u.kleine-koenig@pengutronix.de Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-22Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This contains no changes to the core framework. It is a collection of various clk driver updates. The biggest driver updates in terms of lines of code is the Allwinner driver, closely followed by the Qualcomm and Mediatek drivers. All of those hit high because we add so many lines of clk data. Coming in fourth place is i.MX which also adds a bunch of clk data. This accounts for the new driver additions this time around. Otherwise the patches are lots of little cleanups and fixes for various clk drivers that have baked in linux-next for a while. I suppose one highlight or theme is that more clk drivers are being updated to work as modules, which is interesting to see such critical SoC infrastructure work as a loadable module. New Drivers: - Support qcom SM8150/SM8250 video and display clks - Support Mediatek MT8167 clks - Add clock for CRC block found on vf610 SoCs - Add support for the Renesas R-Car V3U (R8A779A0) SoC - Add support for the VSP for Resizing clock on Renesas RZ/G1H - Support Allwinner A100 SoC clks Removed Drivers: - Remove i.MX21 clock driver, as i.MX21 platform support is being dropped Updates: - Change how qcom's display port clks work - Small non-critical fixes for TI clk driver - Remove various unused variables in clk drivers - Allow Rockchip clk driver to be a module - Remove most __clk_lookup() calls in Samsung drivers (yay!) - Support building i.MX ARMv8 platforms clock driver as module - Some kerneldoc fixes here and there - A couple of minor i.MX clk data corrections - Update audio clock inverter and fdiv2 flag on Amlogic g12 - Make amlogic clk drivers configurable in Kconfig - Fix Renesas VSP clock names to match corrected hardware documentation - Sigma-delta modulation on Allwinner R40 - Various fixes for at91 clk driver - Use semicolons instead of commas in some places - Mark some variables const so they can move to RO memory" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits) clk: imx8mq: Fix usdhc parents order clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: Restrict CLK_HSDK to ARC_SOC_HSDK clk: at91: sam9x60: support only two programmable clocks clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks clk: bcm2835: add missing release if devm_clk_hw_register fails clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name clk: clk-prima2: fix return value check in prima2_clk_init() clk: mmp2: Fix the display clock divider base clk: pxa: Constify static struct clk_ops clk: baikal-t1: Mark Ethernet PLL as critical clk: qoriq: modify MAX_PLL_DIV to 32 clk: axi-clkgen: Set power bits for fractional mode clk: axi-clkgen: Add support for fractional dividers ...
2020-10-13clk: bcm2835: add missing release if devm_clk_hw_register failsNavid Emamdoost
In the implementation of bcm2835_register_pll(), the allocated pll is leaked if devm_clk_hw_register() fails to register hw. Release pll if devm_clk_hw_register() fails. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Link: https://lore.kernel.org/r/20200809231202.15811-1-navid.emamdoost@gmail.com Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-22clk: bcm: rpi: Add register to control pixel bvb clkHoegeun Kwon
To use QHD or higher, we need to modify the pixel_bvb_clk value. So add register to control this clock. Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Link: https://lore.kernel.org/r/20200901040759.29992-2-hoegeun.kwon@samsung.com Reviewed-by: Maxime Ripard <mripard@kernel.org> Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-10clk: bcm: dvp: Select the reset frameworkMaxime Ripard
The DVP driver depends both on the RESET_SIMPLE driver but also on the reset framework itself. Let's make sure we have it enabled. Fixes: 1bc95972715a ("clk: bcm: Add BCM2711 DVP driver") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200903082636.3844629-1-maxime@cerno.tech Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-08-03Merge branches 'clk-actions', 'clk-rockchip', 'clk-iproc', 'clk-intel' and ↵Stephen Boyd
'clk-debugfs' into clk-next - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs * clk-actions: MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs clk: actions: Add Actions S500 SoC Reset Management Unit support dt-bindings: reset: Add binding constants for Actions S500 RMU clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC clk: actions: Fix h_clk for Actions S500 SoC * clk-rockchip: clk: rockchip: add sclk_mac_lbtest to rk3188_critical_clocks clk: rockchip: Revert "fix wrong mmc sample phase shift for rk3328" clk: rockchip: use separate compatibles for rk3288w-cru dt-bindings: clocks: add rk3288w variant compatible clk: rockchip: Handle clock tree for rk3288w variant clk: rockchip: convert rk3036 pll type to use internal lock status clk: rockchip: convert basic pll lock_wait to use regmap_read_poll_timeout clk: rockchip: convert rk3399 pll type to use readl_relaxed_poll_timeout * clk-iproc: clk: iproc: round clock rate to the closest * clk-intel: clk: intel: Avoid unnecessary memset by improving code clk: intel: Improve locking in the driver clk: intel: Use devm_clk_hw_register() instead of clk_hw_register() * clk-debugfs: clk: Add support for enabling/disabling clocks from debugfs
2020-08-03clk: bcm2835: Do not use prediv with bcm2711's PLLsNicolas Saenz Julienne
Contrary to previous SoCs, bcm2711 doesn't have a prescaler in the PLL feedback loop. Bypass it by zeroing fb_prediv_mask when running on bcm2711. Note that, since the prediv configuration bits were re-purposed, this was triggering miscalculations on all clocks hanging from the VPU clock, notably the aux UART, making its output unintelligible. Fixes: 42de9ad400af ("clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20200730182619.23246-1-nsaenzjulienne@suse.de Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: iproc: round clock rate to the closestLori Hikichi
Change from 'DIV_ROUND_UP' to 'DIV_ROUND_CLOSEST' when calculating the clock divisor in the iProc ASIU clock driver to allow to get to the closest clock rate. Fixes: 5fe225c105fd ("clk: iproc: add initial common clock support") Signed-off-by: Lori Hikichi <lhikichi@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Link: https://lore.kernel.org/r/20200612225212.124301-1-ray.jui@broadcom.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-26clk: bcm: dvp: Add missing module informationsMaxime Ripard
The driver for the DVP controller in the BCM2711 was missing the MODULE_* macros resulting in a modpost warning at compilation. Fixes: 1bc95972715a ("clk: bcm: Add BCM2711 DVP driver") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200626112513.90816-1-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Remove the quirks for the CPU clockMaxime Ripard
The CPU clock has had so far a bunch of quirks to expose the clock tree properly, but since we reverted to exposing them through the MMIO driver, we can remove that code from the firmware driver. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/acdf820c2f78a25dd7480a0c018b8b387acd013e.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm2835: Don't cache the PLLB rateMaxime Ripard
The PLLB rate will be changed through the firmware clocks drivers and will change behind this drivers' back, so we don't want to cache the rate. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/9864daba2f584ed49aee5ed1d2f4d48507c58197.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm2835: Allow custom CCF flags for the PLLsMaxime Ripard
While some clock types allow for each clock to specify its own custom flags, the PLLs can't. We will need this for the PLLB, so let's add it. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/ae8bd505d8851f6646e244cd76b6b289346973c8.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19Revert "clk: bcm2835: remove pllb"Maxime Ripard
This reverts commit 2256d89333bd17b8b56b42734a7e1046d52f7fc3. Since we will be expanding the firmware clock driver, we'll need to remove the quirks to deal with the PLLB. However, we still want to expose the clock tree properly, so having that clock in the MMIO driver will allow that. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/5d26a4c58248f5be7760a7f2f720a1310baea5dd.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Give firmware clocks a nameMaxime Ripard
We've registered the firmware clocks using their ID as name, but it's much more convenient to register them using their proper name. Since the firmware doesn't provide it, we have to duplicate it. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/a52a5f5768cd33716cdd35237c6613f26ad75013.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Discover the firmware clocksMaxime Ripard
The RaspberryPi4 firmware actually exposes more clocks than are currently handled by the driver and we will need to change some of them directly based on the pixel rate for the display related clocks, or the load for the GPU. Since the firmware implements DVFS, this rate change can have a number of side-effects, including adjusting the various PLL voltages or the PLL parents. The firmware also implements thermal throttling, so even some thermal pressure can change those parameters behind Linux back. DVFS is currently implemented on the arm, core, h264, v3d, isp and hevc clocks, so updating any of them using the MMIO driver (and thus behind the firmware's back) can lead to troubles, the arm clock obviously being the most problematic. In order to make Linux play as nice as possible with those constraints, it makes sense to rely on the firmware clocks as much as possible. However, the firmware doesn't seem to provide some equivalents to their MMIO counterparts, so we can't really replace that driver entirely. Fortunately, the firmware has an interface to discover the clocks it exposes. Let's use it to discover, register the clocks in the clocks framework and then expose them through the device tree for consumers to use them. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/438d73962741a8c5f7c689319b7443b930a87fde.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Add an enum for the firmware clocksMaxime Ripard
While the firmware allows us to discover the available clocks, we need to discriminate those clocks to only register the ones meaningful to Linux. The firmware also doesn't provide a clock name, so having a list of the ID will help us to give clocks a proper name later on. Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/4738f77ee7de9b48a3bb1c558ead958d0cc064d9.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Add DT provider for the clocksMaxime Ripard
For the upcoming registration of the clocks provided by the firmware, make sure it's exposed to the device tree providers. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/4d8dbe4aaae98b3d3812ad7c3dba53d645cadbaf.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Make the PLLB registration function return a clk_hwMaxime Ripard
The raspberrypi_register_pllb has been returning an integer so far to notify whether the functions has exited successfully or not. However, the OF provider functions in the clock framework require access to the clk_hw structure so that we can expose those clocks to device tree consumers. Since we'll want that for the future clocks, let's return a clk_hw pointer instead of the return code. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/97218559db643e62fdd2b5e3046a2a05b8c2e769.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Split pllb clock hooksMaxime Ripard
The driver only supports the pllb for now and all the clock framework hooks are a mix of the generic firmware interface and the specifics of the pllb. Since we will support more clocks in the future let's split the generic and specific hooks Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/fdc21962fdc7de5c46232f198672d5d5c868ec74.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Rename is_prepared functionMaxime Ripard
The raspberrypi_fw_pll_is_on function doesn't only apply to PLL registered in the driver, but any clock exposed by the firmware. Since we also implement the is_prepared hook, make the function consistent with the other function names. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/ac93cc4e245316bb7e7426ac5ab0de8f3d919731.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Pass the clocks data to the firmware functionMaxime Ripard
The raspberry_clock_property only takes the clock ID as an argument, but now that we have a clock data structure it makes more sense to just pass that structure instead. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/d7a3b4df3ca23feb6e0d9c7ae2d232bfb913f926.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Add clock id to dataMaxime Ripard
The driver has really only supported one clock so far and has hardcoded the ID used in communications with the firmware in all the functions implementing the clock framework hooks. Let's store that in the clock data structure so that we can support more clocks later on. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/e23c37961b97b027e21efa3b818578970f88527a.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Create a data structure for the clocksMaxime Ripard
So far the driver has really only been providing a single clock, and stored both the data associated to that clock in particular with the data associated to the "controller". Since we will change that in the future, let's decouple the clock data from the provider data. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/ee7f508db226214fab4add7f93a351f4137c86a1.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Use CCF boundaries instead of rolling our ownMaxime Ripard
The raspberrypi firmware clock driver has a min_rate / max_rate clamping by storing the info it needs in a private structure. However, the CCF already provides such a facility, so we can switch to it to remove the boilerplate. Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/d4c53dab6de5d5f70743d9c139d0117589530e62.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Make sure the clkdev lookup is removedMaxime Ripard
The clkdev lookup created for the cpufreq device is never removed if there's an issue later in probe or at module removal time. Let's convert to the managed variant of the clk_hw_register_clkdev function to make sure it happens. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/075e2c6d315eccdaf8fb72b320712b86e6c25b22.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Switch to clk_hw_register_clkdevMaxime Ripard
Since we don't care about retrieving the clk_lookup structure pointer returned by clkdev_hw_create, we can just use the clk_hw_register_clkdev function. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/59f6208b6fe3367e735b0cca4f65c2c937639af9.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Remove pllb_arm_lookup global pointerMaxime Ripard
The pllb_arm_lookup pointer in the struct raspberrypi_clk is not used for anything but to store the returned pointer to clkdev_hw_create, and is not used anywhere else in the driver. Let's remove that global pointer from the structure. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/189407f54906d2b07c91de7a4eeb6d8c8934280f.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Make sure pllb_arm is removedMaxime Ripard
The pllb_arm clock was created at probe time, but was never removed if something went wrong later in probe, or if the driver was ever removed from the system. Now that we are using clk_hw_register(), we can just use its managed variant to take care of that for us. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/34254ed1556614658e5dad5cca4cf4fe617df7fc.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Remove global pllb_arm clock pointerMaxime Ripard
The pllb_arm clk_hw pointer in the raspberry_clk structure isn't used anywhere but in the raspberrypi_register_pllb_arm. Let's remove it, this will make our lives easier in future patches. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/842859cf1a77478620f45049178a588448202858.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Use clk_hw_register for pllb_armMaxime Ripard
The pllb_arm clock is defined as a fixed factor clock with the pllb clock as a parent. However, all its configuration is entirely static, and thus we don't really need to call clk_hw_register_fixed_factor() but can simply call clk_hw_register() with a static clk_fixed_factor structure. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/1146177664999eeda65856d28ce94025021dd85e.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Statically init clk_init_dataMaxime Ripard
Instead of declaring the clk_init_data and then calling memset on it, just initialise properly. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/0342572daa561dc1bb4c9fd10641b2016493e32b.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: rpi: Allow the driver to be probed by DTMaxime Ripard
The current firmware clock driver for the RaspberryPi can only be probed by manually registering an associated platform_device. While this works fine for cpufreq where the device gets attached a clkdev lookup, it would be tedious to maintain a table of all the devices using one of the clocks exposed by the firmware. Since the DT on the other hand is the perfect place to store those associations, make the firmware clocks driver probe-able through the device tree so that we can represent it as a node. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/cb8203b862e386ac6c3df3eff0bb5a238b6ec97a.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm: Add BCM2711 DVP driverMaxime Ripard
The HDMI block has a block that controls clocks and reset signals to the HDMI0 and HDMI1 controllers. Let's expose that through a clock driver implementing a clock and reset provider. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-clk@vger.kernel.org Cc: devicetree@vger.kernel.org Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/bb60d97fc76b61c2eabef5a02ebd664c0f57ede0.1591867332.git-series.maxime@cerno.tech Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm63xx-gate: switch to dt-bindings definitionsÁlvaro Fernández Rojas
Now that there are header files for each SoC, let's use them in the bcm63xx-gate controller driver. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20200615090231.2932696-9-noltari@gmail.com Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm63xx-gate: add BCM6318 supportÁlvaro Fernández Rojas
Add support for the gated clock controllers found on the BCM6318. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20200610140858.207329-3-noltari@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-19clk: bcm63xx-gate: fix last clock availabilityÁlvaro Fernández Rojas
In order to make the last clock available, maxbit has to be set to the highest bit value plus 1. Fixes: 1c099779c1e2 ("clk: add BCM63XX gated clock controller driver") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20200609110846.4029620-1-noltari@gmail.com Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-27clk: bcm2835: Constify struct debugfs_reg32Rikard Falkeborn
bcm2835_debugfs_clock_reg32 is never changed and can therefore be made const. This allows the compiler to put it in the text section instead of the data section. Before: text data bss dec hex filename 26598 16088 64 42750 a6fe drivers/clk/bcm/clk-bcm2835.o After: text data bss dec hex filename 26662 16024 64 42750 a6fe drivers/clk/bcm/clk-bcm2835.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lkml.kernel.org/r/20200508220238.4883-1-rikard.falkeborn@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: bcm2835: Remove casting to bcm2835_clk_registerNathan Chancellor
There are four different callback functions that are used for the clk_register callback that all have different second parameter types. bcm2835_register_pll -> struct bcm2835_pll_data bcm2835_register_pll_divider -> struct bcm2835_pll_divider_data bcm2835_register_clock -> struct bcm2835_clock_data bcm2835_register_date -> struct bcm2835_gate_data These callbacks are cast to bcm2835_clk_register so that there is no error about incompatible pointer types. Unfortunately, this is a control flow integrity violation, which verifies that the callback function's types match the prototypes exactly before jumping. [ 0.857913] CFI failure (target: 0xffffff9334a81820): [ 0.857977] WARNING: CPU: 3 PID: 35 at kernel/cfi.c:29 __cfi_check_fail+0x50/0x58 [ 0.857985] Modules linked in: [ 0.858007] CPU: 3 PID: 35 Comm: kworker/3:1 Not tainted 4.19.123-v8-01301-gdbb48f16956e4-dirty #1 [ 0.858015] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 0.858031] Workqueue: events 0xffffff9334a925c8 [ 0.858046] pstate: 60000005 (nZCv daif -PAN -UAO) [ 0.858058] pc : __cfi_check_fail+0x50/0x58 [ 0.858070] lr : __cfi_check_fail+0x50/0x58 [ 0.858078] sp : ffffff800814ba90 [ 0.858086] x29: ffffff800814ba90 x28: 000fffffffdfff3d [ 0.858101] x27: 00000000002000c2 x26: ffffff93355fdb18 [ 0.858116] x25: 0000000000000000 x24: ffffff9334a81820 [ 0.858131] x23: ffffff93357f3580 x22: ffffff9334af1000 [ 0.858146] x21: a79b57e88f8ebc81 x20: ffffff93357f3580 [ 0.858161] x19: ffffff9334a81820 x18: fffffff679769070 [ 0.858175] x17: 0000000000000000 x16: 0000000000000000 [ 0.858190] x15: 0000000000000004 x14: 000000000000003c [ 0.858205] x13: 0000000000003044 x12: 0000000000000000 [ 0.858220] x11: b57e91cd641bae00 x10: b57e91cd641bae00 [ 0.858235] x9 : b57e91cd641bae00 x8 : b57e91cd641bae00 [ 0.858250] x7 : 0000000000000000 x6 : ffffff933591d4e5 [ 0.858264] x5 : 0000000000000000 x4 : 0000000000000000 [ 0.858279] x3 : ffffff800814b718 x2 : ffffff9334a84818 [ 0.858293] x1 : ffffff9334bba66c x0 : 0000000000000029 [ 0.858308] Call trace: [ 0.858321] __cfi_check_fail+0x50/0x58 [ 0.858337] __cfi_check+0x3ab3c/0x4467c [ 0.858351] bcm2835_clk_probe+0x210/0x2dc [ 0.858369] platform_drv_probe+0xb0/0xfc [ 0.858380] really_probe+0x4a0/0x5a8 [ 0.858391] driver_probe_device+0x68/0x104 [ 0.858403] __device_attach_driver+0x100/0x148 [ 0.858418] bus_for_each_drv+0xb0/0x12c [ 0.858431] __device_attach.llvm.17225159516306086099+0xc0/0x168 [ 0.858443] bus_probe_device+0x44/0xfc [ 0.858455] deferred_probe_work_func+0xa0/0xe0 [ 0.858472] process_one_work+0x210/0x538 [ 0.858485] worker_thread+0x2e8/0x478 [ 0.858500] kthread+0x154/0x164 [ 0.858515] ret_from_fork+0x10/0x18 To fix this, change the second parameter of all functions void * and use a local variable with the correct type so that everything works properly. With this, the only use of bcm2835_clk_register is in struct bcm2835_clk_desc so we can just remove it and use the type directly. Fixes: 56eb3a2ed972 ("clk: bcm2835: remove use of BCM2835_CLOCK_COUNT in driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1028 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lkml.kernel.org/r/20200516080806.1459784-2-natechancellor@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: bcm2835: Fix return type of bcm2835_register_gateNathan Chancellor
bcm2835_register_gate is used as a callback for the clk_register member of bcm2835_clk_desc, which expects a struct clk_hw * return type but bcm2835_register_gate returns a struct clk *. This discrepancy is hidden by the fact that bcm2835_register_gate is cast to the typedef bcm2835_clk_register by the _REGISTER macro. This turns out to be a control flow integrity violation, which is how this was noticed. Change the return type of bcm2835_register_gate to be struct clk_hw * and use clk_hw_register_gate to do so. This should be a non-functional change as clk_register_gate calls clk_hw_register_gate anyways but this is needed to avoid issues with further changes. Fixes: b19f009d4510 ("clk: bcm2835: Migrate to clk_hw based registration and OF APIs") Link: https://github.com/ClangBuiltLinux/linux/issues/1028 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lkml.kernel.org/r/20200516080806.1459784-1-natechancellor@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-16clk: bcm2835: use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lkml.kernel.org/r/20191014143642.24552-1-yuehaibing@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-19Merge branches 'clk-cdce-regulator', 'clk-bcm', 'clk-evict-parent-cache' and ↵Stephen Boyd
'clk-actions' into clk-next - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Evict parents from parent cache when they're unregistered * clk-cdce-regulator: clk: clk-cdce925: Add regulator support dt-bindings: clock: cdce925: Add regulator documentation * clk-bcm: clk: bcm2835: Mark PLLD_PER as CRITICAL clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support clk: bcm2835: Introduce SoC specific clock registration dt-bindings: bcm2835-cprman: Add bcm2711 support * clk-evict-parent-cache: clk: Evict unregistered clks from parent caches * clk-actions: clk: actions: Fix factor clk struct member access
2019-09-17clk: bcm2835: Mark PLLD_PER as CRITICALStefan Wahren
The VPU firmware assume that the PLLD_PER isn't modified by the ARM core. Otherwise this could cause firmware lookups. So mark the clock as critical to avoid this. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2019-09-17clk: bcm2835: Add BCM2711_CLOCK_EMMC2 supportStefan Wahren
The new BCM2711 supports an additional clock for the emmc2 block. So add a new compatible and register this clock only for BCM2711. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2019-09-17clk: bcm2835: Introduce SoC specific clock registrationStefan Wahren
In order to support SoC specific clocks (e.g. emmc2 for BCM2711), we extend the description with a SoC support flag. This approach avoids long and mostly redundant lists of clock IDs. Since PLLH is specific to BCM2835, we register only rest of the clocks as common to all SoC. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
generated by cgit (git 2.34.1) at 2024-05-29 00:51:41 +0000