summaryrefslogtreecommitdiff
path: root/drivers/clk/imx/clk-imx8mn.c
AgeCommit message (Collapse)Author
2022-04-12clk: imx8mn: add GPT supportAlvin Šipraga
Add support for the General Purpose Timer (GPT) clocks on the i.MX8MN. The i.MX8MN GPT IP block is the same as on the i.MX8MM, on which this patch is based. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220317223600.175894-2-alvin@pqrs.dk Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2022-04-12clk: imx: Remove the snvs clockJacky Bai
The SNVS moudule is not used only by the linux, it may also used by other SW component is secure world. No sense to populate it in linux, so remove it. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220310093404.236966-1-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2022-04-12clk: imx: add mcore_booted module paratemterPeng Fan
Add mcore_booted boot parameter which could simplify AMP clock management. To i.MX8M, there is CCM(clock control Module) to generate clock root clock, anatop(analog PLL module) to generate PLL, and CCGR (clock gating) to gate clocks to peripherals. As below: anatop->ccm->ccgr->peripheral Linux handles the clock management and the auxiliary core is under control of Linux. Although there is per hardware domain control for CCGR and CCM, auxiliary core normally only use CCGR hardware domain control to avoid linux gate off the clk to peripherals and leave CCM ana anatop to Linux. Per NXP hardware design, because CCGR already support gate to peripherals, and clk root gate power leakage is negligible. So when in AMP case, we could not register the clk root gate. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220228124112.3974242-1-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2022-03-04clk: imx8mn: remove SYS PLL 1/2 clock gatesPeng Fan
Remove the PLL 1/2 gates as it make AMP clock management harder without obvious benifit. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220225081733.2294166-3-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-11-22clk: imx8mn: Fix imx8mn_clko1_selsAdam Ford
When attempting to use sys_pll1_80m as the parent for clko1, the system hangs. This is due to the fact that the source select for sys_pll1_80m was incorrectly pointing to m7_alt_pll_clk, which doesn't yet exist. According to Rev 3 of the TRM, The imx8mn_clko1_sels also incorrectly references an osc_27m which does not exist, nor does an entry for source select bits 010b. Fix both by inserting a dummy clock into the missing space in the table and renaming the incorrectly name clock with dummy. Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20211117133202.775633-1-aford173@gmail.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-08-24clk: imx8mn: Add M7 core clockMarek Vasut
Add missing M7 core clock entry to the iMX8MN clock driver. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Cc: Abel Vesa <abel.vesa@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Link: https://lore.kernel.org/r/20210819202036.2084782-1-marex@denx.de Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-08-24clk: imx8m: fix clock tree update of TF-A managed clocksAhmad Fatoum
On the i.MX8M*, the TF-A exposes a SiP (Silicon Provider) service for DDR frequency scaling. The imx8m-ddrc-devfreq driver calls the SiP and then does clk_set_parent on the DDR muxes to synchronize the clock tree. Since 936c383673b9 ("clk: imx: fix composite peripheral flags"), these TF-A managed muxes have SET_PARENT_GATE set, which results in imx8m-ddrc-devfreq's clk_set_parent after SiP failing with -EBUSY: echo 25000000 > userspace/set_freq imx8m-ddrc-devfreq 3d400000.memory-controller: failed to set dram_apb parent: -16 Fix this by adding a new i.MX composite flag for firmware managed clocks, which clears SET_PARENT_GATE. This is safe to do, because updating the Linux clock tree to reflect reality will always be glitch-free. Fixes: 936c383673b9 ("clk: imx: fix composite peripheral flags") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210810151432.9228-1-a.fatoum@pengutronix.de Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-08-24clk: imx8mn: use correct mux type for clkout pathLucas Stach
The mux in the clkout path needs the current selected parent to be enabled for the switch to work. Use the correct mux type to have the clk framework take care of this requirement. Fixes: af4df655040 ("clk: imx8mn: add clkout1/2 support") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210628211554.2510238-2-l.stach@pengutronix.de Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-04-04clk: imx: Fix reparenting of UARTs not associated with stdoutAdam Ford
Most if not all i.MX SoC's call a function which enables all UARTS. This is a problem for users who need to re-parent the clock source, because any attempt to change the parent results in an busy error due to the fact that the clocks have been enabled already. clk: failed to reparent uart1 to sys_pll1_80m: -16 Instead of pre-initializing all UARTS, scan the device tree to see which UART clocks are associated to stdout, and only enable those UART clocks if it's needed early. This will move initialization of the remaining clocks until after the parenting of the clocks. When the clocks are shutdown, this mechanism will also disable any clocks that were pre-initialized. Fixes: 9461f7b33d11c ("clk: fix CLK_SET_RATE_GATE with clock rate protection") Suggested-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-01-30clk: imx8mn: add clkout1/2 supportLucas Stach
clkout1 and clkout2 allow to supply clocks from the SoC to the board, which is used by some board designs to provide reference clocks. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-12-21Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework got some nice improvements this time around. We gained the ability to get struct clk pointers from a struct clk_hw so that clk providers can consume the clks they provide, if they need to do something like that. This has been a long missing part of the clk provider API that will help us move away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are added for the clk_set_rate() "range" functions, similar to the tracepoints we already have for clk_set_rate() and we added a column to debugfs to help developers understand the hardware enable state of clks in case firmware or bootloader state is different than what is expected. Overall the core changes are mostly improving the clk driver writing experience. At the driver level, we have the usual collection of driver updates and new drivers for new SoCs. This time around the Qualcomm folks introduced a good handful of clk drivers for various parts of three or four SoCs. The SiFive folks added a new clk driver for their FU740 SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that for various new features. One last thing to note in the driver area is that the i.MX driver has gained a new binding to support SCU clks after being on the list for many months. It uses a two cell binding which is sort of rare in clk DT bindings. Beyond that we have the usual set of driver fixes and tweaks that come from more testing and finding out that some configuration was wrong or that a driver could support being built as a module. Summary: Core: - Add some trace points for clk_set_rate() "range" functions - Add hardware enable information to clk_summary debugfs - Replace clk-provider.h with of_clk.h when possible - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw New Drivers: - Bindings for Canaan K210 SoC clks - Support for SiFive FU740 PRCI - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs Updates: - DVFS support for AT91 clk driver - Update git repo branch for Renesas clock drivers - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E - Stop using __raw_*() I/O accessors in Renesas clk drivers - One more conversion of DT bindings to json-schema - Make i.MX clk-gate2 driver more flexible - New two cell binding for i.MX SCU clks - Drop of_match_ptr() in i.MX8 clk drivers - Add arch dependencies for Rockchip clk drivers - Fix i2s on Rockchip rk3066 - Add MIPI DSI clks on Amlogic axg and g12 SoCs - Support modular builds of Amlogic clk drivers - Fix an Amlogic Video PLL clock dependency - Samsung Kconfig dependencies updates for better compile test coverage - Refactoring of the Samsung PLL clocks driver - Small Tegra driver cleanups - Minor fixes to Ingenic and VC5 clk drivers - Cleanup patches to remove unused variables and plug memory leaks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" clk: ingenic: Fix divider calculation with div tables clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 clk: si5351: Wait for bit clear after PLL reset clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error ...
2020-11-10clk: imx8mn: drop of_match_ptr from of_device_id tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might be not relevant here). This fixes compile warning (!CONFIG_OF && !CONFIG_MODULES): drivers/clk/imx/clk-imx8mn.c:592:34: warning: ‘imx8mn_clk_of_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-04clk: imx8m: fix bus critical clk registrationPeng Fan
noc/axi/ahb are bus clk, not peripheral clk. Since peripheral clk has a limitation that for peripheral clock slice, IP clock slices must be stopped to change the clock source. However if the bus clk is marked as critical clk peripheral, the assigned clock parent operation will fail. So we added CLK_SET_PARENT_GATE flag to avoid glitch. And add imx8m_clk_hw_composite_bus_critical for bus critical clock usage Fixes: 936c383673b9e ("clk: imx: fix composite peripheral flags") Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Reported-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1604229834-25594-1-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-08-22clk: imx8m: Support module buildAnson Huang
Change configuration to "tristate", add module author, description and license to support building i.MX8M SoCs clock driver as module. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-21clk: imx: use imx8m_clk_hw_composite_bus for i.MX8M bus clk slicePeng Fan
Switch the bus clk use imx8m_clk_hw_composite_bus, then we could avoid possible issue when setting mux of the clk. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-20clk: imx8m: migrate A53 clk root to use composite corePeng Fan
Migrate A53 clk root to use composite core clk type. It will simplify code and make it easy to use composite specific mux operation. Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-20clk: imx8m: drop clk_hw_set_parent for A53Peng Fan
The parent settings have been moved to dtsi, we no need to set parent here. And clk_hw_set_parent will trigger lockdep warning, because this api not have prepare_lock. Reported-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-11clk: imx8mn: A53 core clock no need to be criticalAnson Huang
'A53_CORE' is just a mux and no need to be critical, being critical will cause its parent clock always ON which does NOT make sense, to make sure CPU's hardware clock source NOT being disabled during clock tree setup, need to move the 'A53_SRC'/'A53_CORE' reparent operations to after critical clock 'ARM_CLK' setup finished. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-24clk: imx: imx8mn: fix a53 cpu clockPeng Fan
The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root signoff timing is 1Ghz, however the A53 core which sources from CCM root could run above 1GHz which voilates the CCM. There is a CORE_SEL slice before A53 core, we need configure the CORE_SEL slice source from ARM PLL, not A53 CCM clk root. The A53 CCM clk root should only be used when need to change ARM PLL frequency. Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out. Configure a53 ccm root sources from 800MHz sys pll Configure a53 core sources from arm_pll_out Mark arm_a53_core as critical clk. Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver") Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-19clk: imx8mn: Remove unused includesAnson Huang
There is nothing in use from init.h/of.h, remove them. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx8mn: Add missing of_node_put()Anson Huang
After finishing using device node got from of_find_compatible_node(), of_node_put() needs to be called. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx: Include clk-provider.h instead of clk.h for i.MX8M SoCs clock driverAnson Huang
The i.MX8M SoCs clock driver are provider, NOT consumer, so clk-provider.h should be used instead of clk.h. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-14clk: imx: imx8mn: use imx8m_clk_hw_composite_corePeng Fan
Use imx8m_clk_hw_composite_core to simplify code. Add new definitions, and X_SRC/CG/DIV will be alias to the new definitions for backwards compatibility Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-13clk: imx8mn: add SNVS clock to clock treeHoria Geantă
i.mx8mn has support for clock gating the snvs module. Add it into clock tree so that rtc-snvs driver could use it. Note this will also be required in the snvs_pwrkey driver, once support for clock management will be added. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23clk: imx: imx8mn: Switch to clk_hw based APIPeng Fan
Switch the entire clk-imx8mn driver to clk_hw based API. This allows us to move closer to a clear split between consumer and provider clk APIs. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx8mn: correct the usb1_ctrl parent to be usb_busLi Jun
Per latest imx8mn datasheet of CCM, the parent of usb1_ctrl_root_clk should be usb_bus. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx8m: Suppress bind attrsLeonard Crestez
The clock drivers on imx8m series are registered as platform devices and this opens the possibility of reloading the driver at runtime. This doesn't actually work: clocks are never removed and attempting to bind again results in registration errors and a crash. Almost all devices depend on clocks anyway so rebinding is unlikely to ever be useful Fix this by explicitly suppressing bind attrs like several other clock drivers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx: Mark dram pll on 8mm and 8mn with CLK_GET_RATE_NOCACHELeonard Crestez
DRAM frequency switches are executed in firmware and can change the configuration of the DRAM PLL outside linux. Mark these CLKs with CLK_GET_RATE_NOCACHE so we always read back the PLL config registers and recalculate rates. In current DRAM frequency tables on 8mm/8mn only the maximum frequency uses the PLL so it's always configured in the same way. However reading back the PLL configuration is the correct behavior and allows additional setpoints in the future. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram clocksLeonard Crestez
These clocks are only modified as part of DRAM frequency switches during which DRAM itself is briefly inaccessible. The switch is performed with a SMC call to by TF-A which runs from a SRAM area; upon returning to linux several clocks bits are modified and we need to update them. For rate bits an easy solution is to just mark with CLK_GET_RATE_NOCACHE so that new rates are always read back from registers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-01Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This merge window we have one small clk provider API in the core framework and then a bunch of driver updates and a handful of new drivers. In terms of diffstat the Qualcomm and Amlogic drivers are high up there because of all the clk data introcued by new drivers. The Nvidia Tegra driver had a lot of work done this cycle too to support suspend/resume and memory controllers. And the OMAP clk driver got proper clk and reset handling in place. Rounding out the patches are various updates to remove unused data, mark things static, correct incorrect data in drivers, etc. All the little things that improve drivers and maintain code health. I will point out that there's a patch in here for the GPIO clk driver, that almost nobody uses, which changes behavior and causes clk_set_rate() to try to change the GPIO gate clk's parent. Other than that things are fairly well SoC specific here. Core: - Add a clk provider API to get current parent index - Plug a memory leak in clk_unregister() path New Drivers: - CGU in Ingenix X1000 - Bitmain BM1880 clks - Qualcomm MSM8998 GPU clk controllers - Qualcomm SC7180 GCC and RPMH clk controllers - Qualcomm QCS404 Q6SSTOP clk controllers - Add support for the Renesas R-Car M3-W+ (r8a77961) SoC - Add support for the Renesas RZ/G2N (r8a774b1) SoC - Add Tegra20/30 External Memory Clock (EMC) support Updates: - Make gpio gate clks propagate rate setting up to parent - Prepare Armada 3700 for suspend to RAM by moving PCIe suspend/resume priority - Drop unused variables, enums, etc. in various clk drivers - Convert various drivers to use devm_platform_ioremap_resource() - Use struct_size() some more in various clk drivers - Improve Rockchip px30 clk tree - Add suspend/resume support to Tegra210 clk driver - Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP - Allwinner DT exports and H6 clk tree fixes - Proper clk and reset handling for OMAP SoCs - Revamped TI divider clk to clamp max divider - Make 1443X/1416X PLL clock structure common for reusing among i.MX8 SoCs - Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used - Add VIDEO2_PLL clock for imx8mq - Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs - Add sm1 support in the Amlogic audio clock controller - Switch some clocks on R-Car Gen2/3 to .determine_rate() - Remove Renesas R-Car Gen2 legacy DT clock support - Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3 - Improve Renesas R-Car Gen3 SD clock handling - Add rate table for Samsung exynos542x GPU and VPLL clks - Fix potential CPU performance degradation after system suspend/resume cycle on exynos542x SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (160 commits) clk: aspeed: Add RMII RCLK gates for both AST2500 MACs MAINTAINERS: Add entry for BM1880 SoC clock driver clk: Add common clock driver for BM1880 SoC dt-bindings: clock: Add devicetree binding for BM1880 SoC clk: Add clk_hw_unregister_composite helper function definition clk: Zero init clk_init_data in helpers clk: ingenic: Allow drivers to be built with COMPILE_TEST MAINTAINERS: Update section for Ux500 clock drivers clk: mark clk_disable_unused() as __init clk: Fix memory leak in clk_unregister() clk: Ingenic: Add CGU driver for X1000. dt-bindings: clock: Add X1000 bindings. clk: tegra: Use match_string() helper to simplify the code clk: pxa: fix one of the pxa RTC clocks clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle() clk: armada-xp: remove unused code clk: tegra: Fix build error without CONFIG_PM_SLEEP clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP clk: tegra: Optimize PLLX restore on Tegra20/30 clk: tegra: Add suspend and resume support on Tegra210 ...
2019-11-27Merge branches 'clk-hisi', 'clk-amlogic', 'clk-samsung', 'clk-renesas' and ↵Stephen Boyd
'clk-imx' into clk-next * clk-hisi: clk: hi6220: use CLK_OF_DECLARE_DRIVER * clk-amlogic: clk: meson: axg-audio: use devm_platform_ioremap_resource() to simplify code clk: meson: axg_audio: add sm1 support clk: meson: axg-audio: provide clk top signal name clk: meson: axg-audio: prepare sm1 addition clk: meson: axg-audio: fix regmap last register clk: meson: axg-audio: remove useless defines dt-bindings: clock: meson: add sm1 resets to the axg-audio controller dt-bindings: clk: axg-audio: add sm1 bindings clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes clk: meson: g12a: fix cpu clock rate setting clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate * clk-samsung: clk: samsung: exynos5420: Add SET_RATE_PARENT flag to clocks on G3D path clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume clk: samsung: exynos5420: Add VPLL rate table clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU clk: samsung: exynos5433: Fix error paths * clk-renesas: (23 commits) clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960 dt-bindings: clock: renesas: cpg-mssr: Document r8a77961 support clk: renesas: r8a77965: Remove superfluous semicolon dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example dt-bindings: clock: renesas: Remove R-Car Gen2 legacy DT bindings dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions dt-bindings: power: Add r8a77961 SYSC power domain definitions clk: renesas: rcar-gen3: Switch SD clocks to .determine_rate() clk: renesas: rcar-gen3: Switch Z clocks to .determine_rate() clk: renesas: rcar-gen2: Switch Z clock to .determine_rate() clk: renesas: r8a774b1: Add TMU clock clk: renesas: cpg-mssr: Add r8a774b1 support dt-bindings: clock: renesas: cpg-mssr: Document r8a774b1 binding clk: renesas: rcar-gen3: Loop to find best rate in cpg_sd_clock_round_rate() clk: renesas: rcar-gen3: Absorb cpg_sd_clock_calc_div() clk: renesas: rcar-gen3: Avoid double table iteration in SD .set_rate() clk: renesas: rcar-gen3: Improve arithmetic divisions clk: renesas: rcar-gen2: Improve arithmetic divisions clk: renesas: Remove R-Car Gen2 legacy DT clock support ... * clk-imx: clk: imx: imx8mq: fix sys3_pll_out_sels clk: imx7ulp: do not export out IMX7ULP_CLK_MIPI_PLL clock clk: imx: imx6ul: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sx: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sll: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx7d: use imx_obtain_fixed_clk_hw to simplify code clk: imx7ulp: Correct DDR clock mux options clk: imx7ulp: Correct system clock source option #7 clk: imx: imx8mq: mark sys1/2_pll as fixed clock clk: imx: imx8mn: mark sys_pll1/2 as fixed clock clk: imx: imx8mm: mark sys_pll1/2 as fixed clock clk: imx8mn: Define gates for pll1/2 fixed dividers clk: imx8mm: Define gates for pll1/2 fixed dividers clk: imx8mq: Define gates for pll1/2 fixed dividers clk: imx: clk-pll14xx: Make two variables static clk: imx8mq: Add VIDEO2_PLL clock clk: imx8mn: Use common 1443X/1416X PLL clock structure clk: imx8mm: Move 1443X/1416X PLL clock structure to common place clk: imx: pll14xx: Fix quick switch of S/K parameter
2019-10-28clk: imx8m: Use SYS_PLL1_800M as intermediate parent of CLK_ARMLeonard Crestez
During cpu frequency switching the main "CLK_ARM" is reparented to an intermediate "step" clock. On imx8mm and imx8mn the 24M oscillator is used for this purpose but it is extremely slow, increasing wakeup latencies to the point that i2c transactions can timeout and system becomes unresponsive. Fix by switching the "step" clk to SYS_PLL1_800M, matching the behavior of imx8m cpufreq drivers in imx vendor tree. This bug was not immediately apparent because upstream arm64 defconfig uses the "performance" governor by default so no cpufreq transitions happen. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver") Cc: stable@vger.kernel.org Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lkml.kernel.org/r/f5d2b9c53f1ed5ccb1dd3c6624f56759d92e1689.1571771777.git.leonard.crestez@nxp.com Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-25clk: imx: imx8mn: mark sys_pll1/2 as fixed clockPeng Fan
According Architecture definition guide, SYS_PLL1 is fixed at 800MHz, SYS_PLL2 is fixed at 1000MHz, so let's use imx_clk_fixed to register the clocks and drop code that could change the rate. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25clk: imx8mn: Define gates for pll1/2 fixed dividersLeonard Crestez
On imx8mn there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2 each with their own gate. Only one of these gates (the one "dividing" by one) is currently defined and it's incorrectly set as the parent of all the fixed-factor dividers. Add the other 8 gates to the clock tree between sys_pll1/2_bypass and the fixed dividers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-16clk: imx: imx8mn: drop unused pll enumPeng Fan
The PLL enum definition is not used, so drop it. Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1571122989-29361-1-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-06clk: imx8mn: Use common 1443X/1416X PLL clock structureAnson Huang
Use common 1413X/1416X PLL clock structure to save a lot of duplicated code on i.MX8MN clock driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-09-17clk: imx: imx8mn: fix pll mux bitPeng Fan
pll BYPASS bit should be kept inside pll driver for glitchless freq setting following spec. If exposing the bit, that means pll driver and clk driver has two paths to touch this bit, which is wrong. So use EXT_BYPASS bit here. And drop uneeded set parent, because EXT_BYPASS default is 0. Suggested-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-5-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-24clk: imx: imx8mn: fix audio pll settingPeng Fan
The AUDIO PLL max support 650M, so the original clk settings violate spec. This patch makes the output 786432000 -> 393216000, and 722534400 -> 361267200 to aligned with NXP vendor kernel without any impact on audio functionality and go within 650MHz PLL limit. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mn: Add necessary frequency support for ARM PLL tableAnson Huang
i.MX8MN supports CPU running at 1.5GHz/1.4GHz/1.2GHz, add missing frequency for ARM PLL table. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mn: Add missing rate_count assignment for each PLL structureAnson Huang
Add .rate_count assignment which is necessary for searching required PLL rate from the each PLL table. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mn: fix int pll clk gatePeng Fan
To Frac pll, the gate shift is 13, however to Int PLL the gate shift is 11. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mn: Add GIC clockLeonard Crestez
This is enabled by default but if it's not explicitly defined and marked as critical then its parent might get turned off. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mn: Fix incorrect parentsLeonard Crestez
* Replace to audio_pll2_clk with audio_pll2_out * Replace sys3_pll2_out with sys_pll3_out * Replace sys1_pll_40m with sys_pll1_40m * qspi parent[2] is sys_pll2_333m not sys_pll1_800m Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mn: Keep uart clocks on for early consoleAnson Huang
Call imx_register_uart_clocks() API to keep uart clocks enabled when earlyprintk or earlycon is active. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx: Add support for i.MX8MN clock driverAnson Huang
This patch adds i.MX8MN clock driver support. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit (git 2.34.1) at 2025-04-24 05:00:59 +0000