summaryrefslogtreecommitdiff
path: root/drivers/clk/imx/clk-pll14xx.c
AgeCommit message (Collapse)Author
2020-11-01clk: imx: remove unneeded semicolonTom Rix
A semicolon is not needed after a switch statement. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-08-22clk: imx: Explicitly include bits.hAnson Huang
It is better to explicitly include the required header file rather then get it through some recursive include. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-08-22clk: imx: Support building i.MX common clock driver as moduleAnson Huang
There are more and more requirements of building SoC specific drivers as modules, add support for building i.MX common clock driver as module to meet the requirement. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-04-29clk: imx: pll14xx: Add the device as argument when registeringAbel Vesa
In order to allow runtime PM, the device needs to be passed on to the register function. Audiomix clock controller, used on i.MX8MP and future platforms, registers a pll14xx and has runtime PM support. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-24clk: imx: pll14xx: Return error if pll type is invalidAnson Huang
When pll type is invalid, ONLY output error message is NOT enough, should return error immediately. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-13clk: imx: pll14xx: Add new frequency entries for pll1443x tableAnson Huang
Add new frequency entries to pll1443x table to meet different display settings requirement. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-31Merge branches 'clk-imx', 'clk-ti', 'clk-xilinx', 'clk-nvidia', 'clk-qcom', ↵Stephen Boyd
'clk-freescale' and 'clk-qoriq' into clk-next - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Fixes for clk controllers on qcom msm8998 SoCs - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Adjust composite clk to new way of describing clk parents - Add a driver for BCLK of Freescale SAI cores * clk-imx: (32 commits) clk: imx: Add support for i.MX8MP clock driver dt-bindings: imx: Add clock binding doc for i.MX8MP clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based API clk: imx: imx8mq: Switch to clk_hw based API clk: imx: imx8mm: Switch to clk_hw based API clk: imx: imx8mn: Switch to clk_hw based API clk: imx: Remove __init for imx_obtain_fixed_clk_hw() API clk: imx: gate3: Switch to clk_hw based API clk: imx: add hw API imx_clk_hw_mux2_flags clk: imx: add imx_unregister_hw_clocks clk: imx: clk-composite-8m: Switch to clk_hw based API clk: imx: clk-pll14xx: Switch to clk_hw based API clk: imx7up: Rename the clks to hws clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw based clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw based clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw based clk: imx: Rename sccg and frac pll register to suggest clk_hw clk: imx: imx7ulp composite: Rename to show is clk_hw based clk: imx: pllv2: Switch to clk_hw based API clk: imx: pllv1: Switch to clk_hw based API ... * clk-ti: clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock clk: ti: dra7: fix parent for gmac_clkctrl clk: ti: dra7: add vpe clkctrl data clk: ti: dra7: add cam clkctrl data dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock * clk-xilinx: clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver * clk-nvidia: clk: tegra20/30: Explicitly set parent clock for Video Decoder clk: tegra20/30: Don't pre-initialize displays parent clock clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe() clk: tegra: Mark fuse clock as critical * clk-qcom: (35 commits) clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: qcom: Add ipq6018 Global Clock Controller support clk: qcom: Add DT bindings for ipq6018 gcc clock controller clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks clk: qcom: rpmh: Add IPA clock for SC7180 clk: qcom: rpmh: skip undefined clocks when registering clk: qcom: Add video clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Video clock bindings dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings clk: qcom: Add graphics clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Graphics clock bindings dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent clk: qcom: Add display clock controller driver for SC7180 dt-bindings: clock: Introduce QCOM sc7180 display clock bindings dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration clk: qcom: alpha-pll: Remove useless read from set rate ... * clk-freescale: clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants * clk-qoriq: clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings
2019-12-23clk: imx: clk-pll14xx: Switch to clk_hw based APIPeng Fan
Switch the imx_clk_pll14xx function to clk_hw based API, rename accordingly and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: pll14xx: fix clk_pll14xx_wait_lockPeng Fan
The usage of readl_poll_timeout is wrong, the 3rd parameter(cond) should be "val & LOCK_STATUS" not "val & LOCK_TIMEOUT_US", It is not check whether the pll locked, LOCK_STATUS reflects the mask, not LOCK_TIMEOUT_US. Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Cc: <stable@vger.kernel.org> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx: Mark dram pll on 8mm and 8mn with CLK_GET_RATE_NOCACHELeonard Crestez
DRAM frequency switches are executed in firmware and can change the configuration of the DRAM PLL outside linux. Mark these CLKs with CLK_GET_RATE_NOCACHE so we always read back the PLL config registers and recalculate rates. In current DRAM frequency tables on 8mm/8mn only the maximum frequency uses the PLL so it's always configured in the same way. However reading back the PLL configuration is the correct behavior and allows additional setpoints in the future. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-14clk: imx: clk-pll14xx: Make two variables staticYueHaibing
Fix sparse warnings: drivers/clk/imx/clk-pll14xx.c:44:37: warning: symbol 'imx_pll1416x_tbl' was not declared. Should it be static? drivers/clk/imx/clk-pll14xx.c:57:37: warning: symbol 'imx_pll1443x_tbl' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06clk: imx8mn: Use common 1443X/1416X PLL clock structureAnson Huang
Use common 1413X/1416X PLL clock structure to save a lot of duplicated code on i.MX8MN clock driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06clk: imx8mm: Move 1443X/1416X PLL clock structure to common placeAnson Huang
Many i.MX8M SoCs use same 1443X/1416X PLL, such as i.MX8MM, i.MX8MN and later i.MX8M SoCs, moving these PLL definitions to pll14xx driver can save a lot of duplicated code on each platform. Meanwhile, no need to define PLL clock structure for every module which uses same type of PLL, e.g., audio/video/dram use 1443X PLL, arm/gpu/vpu/sys use 1416X PLL, define 2 PLL clock structure for each group is enough. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06clk: imx: pll14xx: Fix quick switch of S/K parameterLeonard Crestez
The PLL14xx on imx8m can change the S and K parameter without requiring a reset and relock of the whole PLL. Fix clk_pll144xx_mp_change register reading and use it for pll1443 as well since no reset+relock is required on K changes either. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-09-17clk: imx: clk-pll14xx: unbypass PLL by defaultPeng Fan
When registering the PLL, unbypass the PLL. The PLL has two bypass control bit, BYPASS and EXT_BYPASS. we will expose EXT_BYPASS to clk driver for mux usage, and keep BYPASS inside pll14xx usage. The PLL has a restriction that when M/P change, need to RESET/BYPASS pll to avoid glitch, so we could not expose BYPASS. To make it easy for clk driver usage, unbypass PLL which does not hurt current function. Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-3-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: imx: pll14xx: avoid glitch when set ratePeng Fan
According to PLL1443XA and PLL1416X spec, "When BYPASS is 0 and RESETB is changed from 0 to 1, FOUT starts to output unstable clock until lock time passes. PLL1416X/PLL1443XA may generate a glitch at FOUT." So set BYPASS when RESETB is changed from 0 to 1 to avoid glitch. In the end of set rate, BYPASS will be cleared. When prepare clock, also need to take care to avoid glitch. So we also follow Spec to set BYPASS before RESETB changed from 0 to 1. And add a check if the RESETB is already 0, directly return 0; Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-2-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-07Merge branches 'clk-renesas', 'clk-qcom', 'clk-mtk', 'clk-milbeaut' and ↵Stephen Boyd
'clk-imx' into clk-next - Qualcomm QCS404 CDSP clk support - Qualcomm QCS404 Turing clk support - Mediatek MT8183 clock support - Mediatek MT8516 clock support - Milbeaut M10V clk controller support * clk-renesas: clk: renesas: rcar-gen3: Remove unused variable clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value clk: renesas: r8a77980: Fix RPC-IF module clock's parent clk: renesas: rcar-gen3: Rename DRIF clocks clk: renesas: rcar-gen3: Correct parent clock of Audio-DMAC clk: renesas: rcar-gen3: Correct parent clock of SYS-DMAC clk: renesas: rcar-gen3: Correct parent clock of HS-USB clk: renesas: rcar-gen3: Correct parent clock of EHCI/OHCI clk: renesas: r8a774c0: Add Z2 clock clk: renesas: r8a77990: Add Z2 clock clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parents math64: New DIV64_U64_ROUND_CLOSEST helper clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2 clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offset clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor clk: renesas: r9a06g032: Add missing PCI USB clock clk: renesas: r7s9210: Always use readl() clk: renesas: rcar-gen3: Pass name/offset to cpg_sd_clk_register() * clk-qcom: clk: qcom: Skip halt checks on gcc_pcie_0_pipe_clk for 8998 clk: qcom: Add QCS404 TuringCC clk: qcom: branch: Add AON clock ops dt-bindings: clock: Introduce Qualcomm Turing Clock controller clk: qcom: gcc-qcs404: Add CDSP related clocks and resets * clk-mtk: clk: mediatek: add clock driver for MT8516 dt-bindings: mediatek: apmixedsys: add support for MT8516 dt-bindings: mediatek: infracfg: add support for MT8516 dt-bindings: mediatek: topckgen: add support for MT8516 clk: mediatek: Allow changing PLL rate when it is off clk: mediatek: Add MT8183 clock support clk: mediatek: Add configurable pcw_chg_reg to mtk_pll_data clk: mediatek: Add dt-bindings for MT8183 clocks dt-bindings: ARM: Mediatek: Document bindings for MT8183 clk: mediatek: Add configurable pcwibits and fmin to mtk_pll_data clk: mediatek: Add new clkmux register API clk: mediatek: Disable tuner_en before change PLL rate * clk-milbeaut: clock: milbeaut: Add Milbeaut M10V clock controller dt-bindings: clock: milbeaut: add Milbeaut clock description * clk-imx: clk: imx: correct pfdv2 gate_bit/vld_bit operations clk: imx: clk-pllv3: mark expected switch fall-throughs clk: imx8mq: Add dsi_ipg_div clk: imx: pllv4: add fractional-N pll support clk: imx: keep uart clock on during system boot clk: imx: correct i.MX7D AV PLL num/denom offset clk: imx6sll: Fix mispelling uart4_serial as serail clk: imx: pll14xx: drop unused variable clk: imx: rename clk-imx51-imx53.c to clk-imx5.c clk: imx5: Fix i.MX50 ESDHC clock registers clk: imx5: Fix i.MX50 mainbus clock registers clk: imx: Remove unused imx_get_clk_hw_fixed dt-bindings: clock: imx7ulp: remove SNVS clock clk: imx7ulp: remove snvs clock
2019-04-25clk: imx: pll14xx: drop unused variablePeng Fan
It does not make sense to only get value from pll->base and assign to a local variable when recalc_rate. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12clk: imx: Fix PLL_1416X not rounding ratesLeonard Crestez
Code which initializes the "clk_init_data.ops" checks pll->rate_table before that field is ever assigned to so it always picks "clk_pll1416x_min_ops". This breaks dynamic rate rounding for features such as cpufreq. Fix by checking pll_clk->rate_table instead, here pll_clk refers to the constant initialization data coming from per-soc clk driver. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx: Add PLLs driver for imx8mm socBai Ping
New PLLs are introduced on i.MX8M Mini SOC. PLL1416X is Integer PLL, PLL1443X is a Frac PLL. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit (git 2.34.1) at 2024-06-29 19:00:52 +0000