summaryrefslogtreecommitdiff
path: root/drivers/clk/qcom/gcc-sc7180.c
AgeCommit message (Collapse)Author
2024-06-12clk: qcom: common: commonize qcom_cc_really_probeLuo Jie
The previous wrapper qcom_cc_really_probe takes the platform device as parameter, which is limited to platform driver. As for qca8k clock controller driver, which is registered as the MDIO device, which also follows the qcom clock framework. To commonize qcom_cc_really_probe, updating it to take the struct device as parameter, so that the qcom_cc_really_probe can be utilized by the previous platform device and the new added MDIO device. Also update the current clock controller drivers to take &pdev->dev as parameter when calling qcom_cc_really_probe. Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Luo Jie <quic_luoj@quicinc.com> Link: https://lore.kernel.org/r/20240605124541.2711467-4-quic_luoj@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-14clk: qcom: Use qcom_branch_set_clk_en()Konrad Dybcio
Instead of magically poking at the bit0 of branch clocks' CBCR, use the newly introduced helper. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240212-topic-clk_branch_en-v7-2-5b79eb7278b2@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-30Merge branch 'clk-qcom' into clk-nextStephen Boyd
* clk-qcom: (87 commits) clk: qcom: Fix SM_GPUCC_8450 dependencies clk: qcom: smd-rpm: Set XO rate and CLK_IS_CRITICAL on PCNoC clk: qcom: smd-rpm: Add a way to define bus clocks with rate and flags clk: qcom: gcc-ipq5018: change some variable static clk: qcom: gcc-ipq4019: add missing networking resets dt-bindings: clock: qcom: ipq4019: add missing networking resets clk: qcom: gcc-msm8917: Enable GPLL0_SLEEP_CLK_SRC dt-bindings: clock: gcc-msm8917: Add definition for GPLL0_SLEEP_CLK_SRC clk: qcom: gcc-qdu1000: Update the RCGs ops clk: qcom: gcc-qdu1000: Update the SDCC clock RCG ops clk: qcom: gcc-qdu1000: Add support for GDSCs clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk support clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clock clk: qcom: gcc-qdu1000: Fix clkref clocks handling clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handling dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs clk: qcom: ipq5332: drop the gcc_apss_axi_clk_src clock clk: qcom: ipq5332: drop the mem noc clocks clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks ...
2023-07-31clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_srcDavid Wronek
Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg didn't update its configuration" error. Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Signed-off-by: David Wronek <davidwronek@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230723190725.1619193-2-davidwronek@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-07-19clk: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Dinh Nguyen <dinguyen@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # samsung Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # versaclock5 Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230718143156.1066339-1-robh@kernel.org Acked-by: Abel Vesa <abel.vesa@linaro.org> #imx Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-01-10clk: qcom: gcc-sc7180: get rid of test clockDmitry Baryshkov
The test clock apparently it's not used by anyone upstream. Remove it. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221228185237.3111988-11-dmitry.baryshkov@linaro.org
2023-01-10clk: qcom: gcc-sc7180: switch to parent_hwsDmitry Baryshkov
Change several entries of parent_data to use parent_hws instead, which results in slightly more ovbious code. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230103145515.1164020-9-dmitry.baryshkov@linaro.org
2022-09-27clk: qcom: gcc-sc7180: Update the .pwrsts for usb gdscRajendra Nayak
The USB controller on sc7180 does not retain the state when the system goes into low power state and the GDSC is turned off. This results in the controller reinitializing and re-enumerating all the connected devices (resulting in additional delay while coming out of suspend) Fix this by updating the .pwrsts for the USB GDSC so it only transitions to retention state in low power. Since sc7180 only supports cx (parent of usb gdsc) Retention, there are no cxcs offsets mentioned in order to support the Retention state. Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220920111517.10407-2-quic_rjendra@quicinc.com
2021-04-07clk: qcom: gcc-sc7180: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210405224743.590029-30-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-07clk: qcom: gcc-sc7180: use parent_hws where possibleDmitry Baryshkov
Switch to using parent_hws instead of parent_data when parents are defined in this driver and so accessible using clk_hw. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210405224743.590029-20-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-03-13clk: qcom: gcc-sc7180: Use floor ops for the correct sdcc1 clkDouglas Anderson
While picking commit a8cd989e1a57 ("mmc: sdhci-msm: Warn about overclocking SD/MMC") back to my tree I was surprised that it was reporting warnings. I thought I fixed those! Looking closer at the fix, I see that I totally bungled it (or at least I halfway bungled it). The SD card clock got fixed (and that was the one I was really focused on fixing), but I totally adjusted the wrong clock for eMMC. Sigh. Let's fix my dumb mistake. Now both SD and eMMC have floor for the "apps" clock. This doesn't matter a lot for the final clock rate for HS400 eMMC but could matter if someone happens to put some slower eMMC on a sc7180. We also transition through some of these lower rates sometimes and having them wrong could cause problems during these transitions. These were the messages I was seeing at boot: mmc1: Card appears overclocked; req 52000000 Hz, actual 100000000 Hz mmc1: Card appears overclocked; req 52000000 Hz, actual 100000000 Hz mmc1: Card appears overclocked; req 104000000 Hz, actual 192000000 Hz Fixes: 6d37a8d19283 ("clk: qcom: gcc-sc7180: Use floor ops for sdcc clks") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20210224095013.1.I2e2ba4978cfca06520dfb5d757768f9c42140f7c@changeid Reviewed-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-22Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This is all driver updates, the majority of which is a bunch of new Qualcomm clk drivers that dominate the diffstat because we add support for six SoCs from that particular vendor. The other big change is the removal of various clk drivers that are no longer used now that the kernel is dropping support for those SoCs. Beyond that there's the usual non-critical fixes for existing drivers and a good number of patches from Lee Jones that cleanup a bunch of W=1 enabled builds. Removed Drivers: - Remove efm32 clk driver - Remove tango4 clk driver - Remove zte zx clk driver - Remove sirf prima2/atlast clk drivers - Remove u300 clk driver New Drivers: - PLL support on MStar/SigmaStar ARMv7 SoCs - CPU clks for Qualcomm SDX55 - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs - GCC clks for Qualcomm SM8350 - GPU clks for Qualcomm SDM660/SDM630 Updates: - Video clk fixups on Qualcomm SM8250 - Improvements for multimedia clks on Qualcomm MSM8998 - Fix many warnings with W=1 enabled builds under drivers/clk/ - Support crystal load capacitance for Versaclock VC5 - Add a "skip recall" DT binding for Silicon Labs' si570 to avoid glitches at boot - Convert Xilinx VCU clk driver to a proper clk provider driver - Expose Xilinx ZynqMP clk driver to more platforms - Amlogic pll driver fixup - Amlogic meson8b clock controller dt support clean up - Remove mipi clk from the Amlogic axg clock controller - New Rockchip rk3368 clock ids related to camera input - Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk reparenting - A series from Liu Ying that adds some SCU clocks support for i.MX8qxp DC0/MIPI-LVDS subsystems - A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ, and clkout1/2 support for i.MX8MM/MN - Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U - Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs - Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial (HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA (SYS-DMAC) clocks on Renesas R-Car V3U - Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs - Allwinner H616 SoC clk support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (171 commits) clk: mstar: msc313-mpll: Fix format specifier clk: mstar: Allow MStar clk drivers to be compile tested clk: qoriq: use macros to generate pll_mask clk: qcom: Add Global Clock controller (GCC) driver for SC7280 dt-bindings: clock: Add SC7280 GCC clock binding clk: qcom: rpmh: Add support for RPMH clocks on SC7280 dt-bindings: clock: Add RPMHCC bindings for SC7280 clk: qcom: gcc-sm8350: add gdsc dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc clk: qcom: gdsc: Implement NO_RET_PERIPH flag clk: mstar: MStar/SigmaStar MPLL driver ...
2021-02-08clk: qcom: gcc-sc7180: Mark the MM XO clocks to be always ONTaniya Das
There are intermittent GDSC power-up failures observed for titan top gdsc, which requires the XO clock. Thus mark all the MM XO clocks always enabled from probe. Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones") Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1611128871-5898-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-01-12clk: qcom: gcc-sc7180: Mark the camera abh clock always ONTaniya Das
The camera clock controller requires the AHB clock, the driver when moved to use the pm_runtime_get() API, the camera ahb clock failed turn on before access, thus mark it as always ON. Reported-by: Stephen Boyd <sboyd@kernel.org> Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones") Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1608573816-1465-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2Douglas Anderson
50 MHz is an incredibly common clock rate for SD cards to run at. It's "high speed" mode in SD (not very fast these days, but it used to be) or: #define HIGH_SPEED_MAX_DTR 50000000 If we don't support this then older "high speed" cards can only run at 25 MHz or at half their normal speed. There doesn't seem to be any reason to skip this clock rate, so add it. Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20201210102234.2.I26dcc0cee374f5571d9929c9985f463773167e68@changeid Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: qcom: gcc-sc7180: Use floor ops for sdcc clksDouglas Anderson
I would repeat the same commit message that was in commit 5e4b7e82d497 ("clk: qcom: gcc-sdm845: Use floor ops for sdcc clks") but it seems silly to do so when you could just go read that commit. NOTE: this is actually extra terrible because we're missing the 50 MHz rate in the table (see the next patch AKA ("clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2")). That means then when you run an older SD card it'll try to clock it at 100 MHz when it's only specced to run at 50 MHz max. As you can probably guess that doesn't work super well. Signed-off-by: Douglas Anderson <dianders@chromium.org> Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Link: https://lore.kernel.org/r/20201210102234.1.I096779f219625148900fc984dd0084ed1ba87c7f@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: qcom: gcc: Add support for GCC LPASS clock for SC7180Taniya Das
Add the GCC lpass clock which is required to access the LPASS core clocks. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1595606878-2664-4-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845Taniya Das
The display gpll0 branch clock inside GCC needs to always be enabled. Otherwise the AHB clk (disp_cc_mdss_ahb_clk_src) for the display clk controller (dispcc) will stop clocking while sourcing from gpll0 when this branch inside GCC is turned off during unused clk disabling. We can never turn this branch off because the AHB clk for the display subsystem is needed to read/write any registers inside the display subsystem including clk related ones. This makes this branch a really easy way to turn off AHB access to the display subsystem and cause all sorts of mayhem. Let's just make the clk ops keep the clk enabled forever and ignore any attempts to disable this clk so that dispcc accesses keep working. Signed-off-by: Taniya Das <tdas@codeaurora.org> Reported-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/1594796050-14511-1-git-send-email-tdas@codeaurora.org Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Fixes: 06391eddb60a ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845") [sboyd@kernel.org: Fill out commit text more] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: qcom: gcc: Add support for Secure control source clockTaniya Das
The secure controller driver requires to request for various frequencies on the source clock, thus add support for the same. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/1589709861-27580-4-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: qcom: gcc: Add support for a new frequency for SC7180Taniya Das
There is a requirement to support 51.2MHz from GPLL6 for qup clocks, thus update the frequency table and parent data/map to use the GPLL6 source PLL. Fixes: 17269568f7267 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/1589709861-27580-2-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-20clk: qcom: gcc: Add support for modem clocks in GCCTaniya Das
Add the required modem clocks in global clock controller which are required to bring the modem out of reset. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/1584596131-22741-3-git-send-email-tdas@codeaurora.org Tested-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-18clk: qcom: gcc-sc7180: Fix setting flag for votable GDSCsMatthias Kaehlcke
Commit 17269568f7267 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") sets the VOTABLE flag in .pwrsts, but it needs to be set in .flags, fix this. Fixes: 17269568f7267 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lkml.kernel.org/r/20191204120341.1.I9971817e83ee890d1096c43c5a6ce6ced53d5bd3@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-07clk: qcom: Add Global Clock controller (GCC) driver for SC7180Taniya Das
Add support for the global clock controller found on SC7180 based devices. This should allow most non-multimedia device drivers to probe and control their clocks. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/20191014102308.27441-6-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit (git 2.34.1) at 2025-03-19 11:28:11 +0000