summaryrefslogtreecommitdiff
path: root/drivers/clk/qcom
AgeCommit message (Collapse)Author
2022-04-21clk: qcom: clk-rcg2: fix gfx3d frequency calculationDmitry Baryshkov
Since the commit 948fb0969eae ("clk: Always clamp the rounded rate"), the clk_core_determine_round_nolock() would clamp the requested rate between min and max rates from the rate request. Normally these fields would be filled by clk_core_get_boundaries() called from clk_round_rate(). However clk_gfx3d_determine_rate() uses a manually crafted rate request, which did not have these fields filled. Thus the requested frequency would be clamped to 0, resulting in weird frequencies being requested from the hardware. Fix this by filling min_rate and max_rate to the values valid for the respective PLLs (0 and ULONG_MAX). Fixes: 948fb0969eae ("clk: Always clamp the rounded rate") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220419235447.1586192-1-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reported-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-30Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There's one large change in the core clk framework here. We change how clk_set_rate_range() works so that the frequency is re-evaulated each time the rate is changed. Previously we wouldn't let clk providers see a rate that was different if it was still within the range, which could be bad for power if the clk could run slower when a range expands. Now the clk provider can decide to do something differently when the constraints change. This broke Nvidia's clk driver so we had to wait for the fix for that to bake a little more in -next. The rate range patch series also introduced a kunit suite for the clk framework that we're going to extend in the next release. It already made it easy to find corner cases in the rate range patches so I'm excited to see it cover more clk code and increase our confidence in core framework patches in the future. I also added a kunit test for the basic clk gate code and that work will continue to cover more basic clk types: muxes, dividers, etc. Beyond the core code we have the usual set of clk driver updates and additions. Qualcomm again dominates the diffstat here with lots more SoCs being supported and i.MX follows afer that with a similar number of SoCs gaining clk drivers. Beyond those large additions there's drivers being modernized to use clk_parent_data so we can move away from global string names for all the clks in an SoC. Finally there's lots of little fixes all over the clk drivers for typos, warnings, and missing clks that aren't critical and get batched up waiting for the next merge window to open. Nothing super big stands out in the driver pile. Full details are below. Core: - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range New Drivers: - i.MXRT1050 clock driver and bindings - i.MX8DXL clock driver and bindings - i.MX93 clock driver and bindings - NCO blocks on Apple SoCs - Audio clks on StarFive JH7100 RISC-V SoC - Add support for the new Renesas RZ/V2L SoC - Qualcomm SDX65 A7 PLL - Qualcomm SM6350 GPU clks - Qualcomm SM6125, SM6350, QCS2290 display clks - Qualcomm MSM8226 multimedia clks Updates: - Kunit tests for clk-gate implementation - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments - Mark mux table as const in clk-mux - Make the all_lists array const - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on Renesas R-Car S4-8 - Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates) - Use of_device_get_match_data() instead of open-coding on Rockchip rk3568 - Reintroduce the expected fractional-divider behaviour that disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS - Remove SYS PLL 1/2 clock gates for i.MX8M* - Remove AUDIO MCLK ROOT from i.MX7D - Add fracn gppll clock type used by i.MX93 - Add new composite clock for i.MX93 - Add missing media mipi phy ref clock for i.MX8MP - Fix off by one in imx_lpcg_parse_clks_from_dt() - Rework for the imx pll14xx - sama7g5: One low priority fix for GCLK of PDMC - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8 - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3 - Add CAN-FD clocks on Renesas R-Car V3U - Qualcomm SC8280XP RPMCC - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML - Convert various Qualcomm drivers to use clk_parent_data - Remove test clocks from various Qualcomm drivers - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs - Better pixel clk frequency support on Qualcomm RCG2 clks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits) clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate dt-bindings: clock: drop useless consumer example dt-bindings: clock: renesas: Make example 'clocks' parsable clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() clk: visconti: prevent array overflow in visconti_clk_register_gates() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments ...
2022-03-29Merge branches 'clk-range', 'clk-uniphier', 'clk-apple' and 'clk-qcom' into ↵Stephen Boyd
clk-next - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range - Support for NCO blocks on Apple SoCs * clk-range: clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate clk: bcm: rpi: Run some clocks at the minimum rate allowed clk: bcm: rpi: Set a default minimum rate clk: bcm: rpi: Add variant structure clk: Add clk_drop_range clk: Always set the rate on clk_set_range_rate clk: Use clamp instead of open-coding our own clk: Always clamp the rounded rate clk: Enforce that disjoints limits are invalid clk: Introduce Kunit Tests for the framework clk: Fix clk_hw_get_clk() when dev is NULL * clk-uniphier: clk: uniphier: Fix fixed-rate initialization * clk-apple: clk: clk-apple-nco: Allow and fix module building MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE clk: clk-apple-nco: Add driver for Apple NCO dt-bindings: clock: Add Apple NCO * clk-qcom: (61 commits) clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: qcom: Add display clock controller driver for SM6125 dt-bindings: clock: add QCOM SM6125 display clock bindings clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig clk: qcom: gcc: Add emac GDSC support for SM8150 clk: qcom: gcc: sm8150: Fix some identation issues clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150 clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150 clk: qcom: clk-rcg2: Update the frac table for pixel clock clk: qcom: clk-rcg2: Update logic to calculate D value for RCG clk: qcom: smd: Add missing MSM8998 RPM clocks clk: qcom: smd: Add missing RPM clocks for msm8992/4 dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks clk: qcom: gcc-ipq806x: add CryptoEngine resets dt-bindings: reset: add ipq8064 ce5 resets clk: qcom: gcc-ipq806x: add CryptoEngine clocks dt-bindings: clock: add ipq8064 ce5 clk define clk: qcom: gcc-ipq806x: add additional freq for sdc table clk: qcom: clk-rcg: add clk_rcg_floor_ops ops ...
2022-03-29Merge branches 'clk-starfive', 'clk-ti', 'clk-terminate' and 'clk-cleanup' ↵Stephen Boyd
into clk-next - Audio clks on StarFive JH7100 RISC-V SoC - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments * clk-starfive: clk: starfive: Add JH7100 audio clock driver clk: starfive: jh7100: Support more clock types clk: starfive: jh7100: Make hw clock implementation reusable dt-bindings: clock: Add starfive,jh7100-audclk bindings dt-bindings: clock: Add JH7100 audio clock definitions clk: starfive: jh7100: Handle audio_div clock properly clk: starfive: jh7100: Don't round divisor up twice * clk-ti: clk: ti: Drop legacy compatibility clocks for dra7 clk: ti: Drop legacy compatibility clocks for am4 clk: ti: Drop legacy compatibility clocks for am3 clk: ti: Update component clocks to use ti_dt_clk_name() clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name() clk: ti: Add ti_dt_clk_name() helper to use clock-output-names clk: ti: Use clock-output-names for clkctrl clk: ti: Add ti_find_clock_provider() to use clock-output-names clk: ti: Optionally parse IO address from parent clock node clk: ti: Preserve node in ti_dt_clocks_register() clk: ti: Constify clkctrl_name * clk-terminate: clk: actions: Make sentinel elements more obvious clk: clps711x: Terminate clk_div_table with sentinel element clk: hisilicon: Terminate clk_div_table with sentinel element clk: loongson1: Terminate clk_div_table with sentinel element clk: actions: Terminate clk_div_table with sentinel element * clk-cleanup: clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments clk: COMMON_CLK_LAN966X should depend on SOC_LAN966 clk: Use of_device_get_match_data() clk: bcm2835: Remove unused variable clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver clk: cleanup comments clk: socfpga: cleanup spdx tags
2022-03-24clk: qcom: gcc-msm8994: Fix gpll4 widthKonrad Dybcio
The gpll4 postdiv is actually a div4, so make sure that Linux is aware of this. This fixes the following error messages: mmc1: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz mmc1: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz Fixes: aec89f78cf01 ("clk: qcom: Add support for msm8994 global clock controller") Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20220319174940.341137-1-konrad.dybcio@somainline.org Tested-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-15clk: qcom: sm6125-gcc: fix typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220314115354.144023-16-Julia.Lawall@inria.fr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-09clk: qcom: Add display clock controller driver for SM6125Martin Botka
Add support for the display clock controller found on SM6125 based devices. This allows display drivers to probe and control their clocks. Signed-off-by: Martin Botka <martin.botka@somainline.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220303131812.302302-4-marijn.suijten@somainline.org
2022-03-09clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and KconfigMarijn Suijten
In order to keep at least the list of `CONFIG_SM_` drivers sorted alphabetically, SDX_GCC_65 should have been moved one line up. This in turn makes it easier and cleaner to add the followup SM_DISPCC_6125 driver in the right place, right before SM_DISPCC_8250. Fixes: d79afa201328 ("clk: qcom: Add SDX65 GCC support") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220303131812.302302-2-marijn.suijten@somainline.org
2022-03-09clk: qcom: gcc: Add emac GDSC support for SM8150Bhupesh Sharma
Add the EMAC GDSC defines and driver structures for SM8150. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220303084824.284946-4-bhupesh.sharma@linaro.org
2022-03-09clk: qcom: gcc: sm8150: Fix some identation issuesBhupesh Sharma
Fix identation issues with usb30 gdsc structs in gcc-sm8150. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220303084824.284946-3-bhupesh.sharma@linaro.org
2022-03-09clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150Bhupesh Sharma
Add the UFS_CARD and UFS_PHY GDSC defines & driver structures for SM8150. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220303082140.240745-2-bhupesh.sharma@linaro.org
2022-03-09clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150Bhupesh Sharma
Add the PCIe0 and PCIe1 GDSC defines & driver structures for SM8150. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220302203045.184500-4-bhupesh.sharma@linaro.org
2022-03-09clk: qcom: clk-rcg2: Update the frac table for pixel clockTaniya Das
Support the new numerator and denominator for pixel clock on SM8350 and support rgb101010, RGB888 use cases on SM8450. Fixes: 99cbd064b059f ("clk: qcom: Support display RCG clocks") Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220227175536.3131-2-tdas@codeaurora.org
2022-03-09clk: qcom: clk-rcg2: Update logic to calculate D value for RCGTaniya Das
The display pixel clock has a requirement on certain newer platforms to support M/N as (2/3) and the final D value calculated results in underflow errors. As the current implementation does not check for D value is within the accepted range for a given M & N value. Update the logic to calculate the final D value based on the range. Fixes: 99cbd064b059f ("clk: qcom: Support display RCG clocks") Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220227175536.3131-1-tdas@codeaurora.org
2022-03-09clk: qcom: smd: Add missing MSM8998 RPM clocksKonrad Dybcio
Add missing RPM-provided clocks on msm8998 and reorder the definitions where needed. Tested-by: Jami Kettunen <jami.kettunen@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Tested-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226214126.21209-3-konrad.dybcio@somainline.org
2022-03-09clk: qcom: smd: Add missing RPM clocks for msm8992/4Konrad Dybcio
XO and MSS_CFG were omitted when first adding the clocks for these SoCs. Add them, and while at it, move the XO clock to the top of the definition list, as ideally everyone should start using it sooner or later.. Fixes: b4297844995f ("clk: qcom: smd: Add support for MSM8992/4 rpm clocks") Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226214126.21209-2-konrad.dybcio@somainline.org
2022-03-08clk: qcom: gcc-ipq806x: add CryptoEngine resetsAnsuel Smith
Add missing CryptoEngine resets. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-15-ansuelsmth@gmail.com
2022-03-08clk: qcom: gcc-ipq806x: add CryptoEngine clocksAnsuel Smith
Add missing CryptoEngine clocks and pll11 required clock. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-13-ansuelsmth@gmail.com
2022-03-08clk: qcom: gcc-ipq806x: add additional freq for sdc tableAnsuel Smith
Add additional freq supported for the sdc table. The ops are changed to the floor_ops to handle a freq request of 52kHz where we need to provide a freq of 51.2kHz instead for stability reason. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-11-ansuelsmth@gmail.com
2022-03-08clk: qcom: clk-rcg: add clk_rcg_floor_ops opsAnsuel Smith
Add clk_rcg_floor_ops for clock that can't provide a stable freq and require to use a floor freq to provide the requested frequency. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-10-ansuelsmth@gmail.com
2022-03-08clk: qcom: gcc-ipq806x: add unusued flag for critical clockAnsuel Smith
Some clocks are used by other devices present on the SoC. For example the gsbi4_h_clk is used by RPM and is if disabled cause the RPM to reject any regulator change command. These clock should never be disabled. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-9-ansuelsmth@gmail.com
2022-03-08clk: qcom: gcc-ipq806x: add additional freq nss coresAnsuel Smith
Ipq8065 SoC (an evolution of ipq8064 SoC) contains nss cores that can be clocked to 800MHz. Add these missing freq to the gcc driver. Set the freq_tbl for the ubi32_cores to the correct values based on the machine compatible. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-8-ansuelsmth@gmail.com
2022-03-08clk: qcom: gcc-ipq806x: use ARRAY_SIZE for num_parentsAnsuel Smith
Use ARRAY_SIZE for num_parents instead of hardcoding the value. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-7-ansuelsmth@gmail.com
2022-03-08clk: qcom: gcc-ipq806x: convert parent_names to parent_dataAnsuel Smith
Convert parent_names to parent_data to modernize the driver. Where possible use parent_hws directly. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-6-ansuelsmth@gmail.com
2022-03-08clk: qcom: gcc-ipq806x: fix wrong naming for gcc_pxo_pll8_pll0Ansuel Smith
Parent gcc_pxo_pll8_pll0 had the parent definition and parent map swapped. Fix this naming error. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-5-ansuelsmth@gmail.com
2022-03-08clk: qcom: Add SDX65 APCS clock controller supportRohit Agarwal
Update APCS Kconfig to reflect support for SDX65 APCS clock controller. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1645505785-2271-6-git-send-email-quic_rohiagar@quicinc.com
2022-03-08clk: qcom: Add A7 PLL support for SDX65Rohit Agarwal
Update A7 PLL Kconfig to reflect support for SDX65. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1645505785-2271-3-git-send-email-quic_rohiagar@quicinc.com
2022-03-08clk: qcom: Add GPU clock controller driver for SM6350Konrad Dybcio
Add support for the GPU clock controller found on SM6350. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220222011534.3502-4-konrad.dybcio@somainline.org
2022-03-08clk: qcom: Add display clock controller driver for SM6350Konrad Dybcio
Add support for the display clock controller found on SM6350. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220222011534.3502-2-konrad.dybcio@somainline.org
2022-02-25clk: qcom: Declare mux table as const u32[]Jonathan Neuschäfer
Now that clk_register_mux_table takes a const u32 *, we can declare the mux tables as const u32[]. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20220205103613.1216218-7-j.neuschaefer@gmx.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-24clk: qcom: rpmhcc: add sc8280xp support to the RPMh clock controllerBjorn Andersson
The Qualcomm SC8280XP platform exposes 5 clocks through the RPMh clock controller. Add these, and the relates active-only variants, to the RPMh clock controller driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220223044516.3776637-2-bjorn.andersson@linaro.org
2022-02-24clk: qcom: dispcc: Update the transition delay for MDSS GDSCTaniya Das
On SC7180 we observe black screens because the gdsc is being enabled/disabled very rapidly and the GDSC FSM state does not work as expected. This is due to the fact that the GDSC reset value is being updated from SW. The recommended transition delay for mdss core gdsc updated for SC7180/SC7280/SM8250. Fixes: dd3d06622138 ("clk: qcom: Add display clock controller driver for SC7180") Fixes: 1a00c962f9cd ("clk: qcom: Add display clock controller driver for SC7280") Fixes: 80a18f4a8567 ("clk: qcom: Add display clock controller driver for SM8150 and SM8250") Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/20220223185606.3941-2-tdas@codeaurora.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> [sboyd@kernel.org: lowercase hex] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-24clk: qcom: gdsc: Add support to update GDSC transition delayTaniya Das
GDSCs have multiple transition delays which are used for the GDSC FSM states. Older targets/designs required these values to be updated from gdsc code to certain default values for the FSM state to work as expected. But on the newer targets/designs the values updated from the GDSC driver can hamper the FSM state to not work as expected. On SC7180 we observe black screens because the gdsc is being enabled/disabled very rapidly and the GDSC FSM state does not work as expected. This is due to the fact that the GDSC reset value is being updated from SW. Thus add support to update the transition delay from the clock controller gdscs as required. Fixes: 45dd0e55317cc ("clk: qcom: Add support for GDSCs) Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/20220223185606.3941-1-tdas@codeaurora.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-24clk: qcom: ipq8074: Use floor ops for SDCC1 clockDirk Buchwalder
Use floor ops on SDCC1 APPS clock in order to round down selected clock frequency and avoid overclocking SD/eMMC cards. For example, currently HS200 cards were failling tuning as they were actually being clocked at 384MHz instead of 192MHz. This caused some boards to disable 1.8V I/O and force the eMMC into the standard HS mode (50MHz) and that appeared to work despite the eMMC being overclocked to 96Mhz in that case. There was a previous commit to use floor ops on SDCC clocks, but it looks to have only covered SDCC2 clock. Fixes: 9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks") Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de> Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220210173100.505128-1-robimarko@gmail.com
2022-02-17clk: qcom: gcc-msm8994: Remove NoC clocksKonrad Dybcio
Just like in commit 05cf3ec00d46 ("clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk") adding NoC clocks turned out to be a huge mistake, as they cause a lot of issues at little benefit (basically letting Linux know about their children's frequencies), especially when mishandled or misconfigured. Adding these ones broke SDCC approx 99 out of 100 times, but that somehow went unnoticed. To prevent further issues like this one, remove them. This commit is effectively a revert of 74a33fac3aab ("clk: qcom: gcc-msm8994: Add missing NoC clocks") with ABI preservation. Fixes: 74a33fac3aab ("clk: qcom: gcc-msm8994: Add missing NoC clocks") Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20220217232408.78932-1-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-10clk: qcom: Add MSM8226 Multimedia Clock Controller supportBartosz Dudziak
Modify the existing MSM8974 multimedia clock controller driver to support the MMCC found on MSM8226 based devices. This should allow most multimedia device drivers to probe and control their clocks. Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220207185411.19118-3-bartosz.dudziak@snejp.pl
2022-02-10clk: qcom: gcc-msm8996: start getting rid of xo clkDmitry Baryshkov
The "xo" fixed_factor clock is a leftover/hack from a time when we couldn't make rpmhcc the root of all clocks. It is going to be removed once all users of this clock are converted to use clocks specified through the DTS. Replace internal usage of the xo clock with the cxo (RPM_SMD_BB_CLK1) parent, specifying xo_board as a fallback. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-17-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gcc-msm8996: use parent_hws/_data instead of parent_namesDmitry Baryshkov
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-16-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gcc-msm8996: move clock parent tables downDmitry Baryshkov
Move clock parent tables down, after the GPLL declrataions, so that we can use gpll hw clock fields in the next commit. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-15-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gcc-msm8996: drop unsupported clock sourcesDmitry Baryshkov
In preparation of updating the msm8996 gcc driver, drop all unsupported GPLL sources (gpll1/gpll1_early_div, gpll2/gpll2_early and gpll3). Downstream kernel also does not provide support for these GPLL sources, so it is safe to drop them. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-14-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gcc-msm8996: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-13-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: videocc-sc7180: use parent_hws instead of parent_dataDmitry Baryshkov
If all parents are specified as clk_hw, we can use parent_hws instead of parent_data. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-12-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sdm845: convert to parent_hws/_dataDmitry Baryshkov
Convert the clock driver to specify parent hws/data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-11-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sdm845: move clock parent tables downDmitry Baryshkov
Move clock parent tables down, after the PLL declrataions, so that we can use pll hw clock fields in the next commit. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-10-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sdm845: get rid of the test clockDmitry Baryshkov
The test clock isn't in the bindings and apparently it's not used by anyone upstream. Remove it. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-9-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sdm845: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-8-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sc7180: use parent_hws instead of parent_dataDmitry Baryshkov
If all parents are specified as clk_hw, we can use parent_hws instead of parent_data. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-7-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sc7180: get rid of the test clockDmitry Baryshkov
The test clock isn't in the bindings and apparently it's not used by anyone upstream. Remove it. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-6-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sc7180: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-5-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gpucc-sdm660: use parent_hws instead of parent_dataDmitry Baryshkov
If all parents are specified as clk_hw, we can use parent_hws instead of parent_data. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-4-dmitry.baryshkov@linaro.org
generated by cgit (git 2.34.1) at 2025-05-03 09:04:02 +0000