| Age | Commit message (Collapse) | Author |
|---|
|
'clk-mtk-crit' and 'clk-mtk' into clk-next
* clk-ingenic:
clk: ingenic: Remove set but not used variable 'enable'
clk: ingenic: Fix doc of ingenic_cgu_div_info
clk: ingenic: Fix round_rate misbehaving with non-integer dividers
clk: ingenic: jz4740: Fix gating of UDC clock
* clk-mtk-mux:
clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
clk: mediatek: add MUX_GATE_FLAGS_2
* clk-qcom-sdm845-pcie:
clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks
* clk-mtk-crit:
clk: mediatek: Mark bus and DRAM related clocks as critical
clk: mediatek: Add flags to mtk_gate
clk: mediatek: Add MUX_FLAGS macro
* clk-mtk:
clk: mediatek: correct cpu clock name for MT8173 SoC
|
|
'clk-SA-fixes' into clk-next
- Updates for qcom MSM8998 GCC clks
- qcom MSM8998 RPM managed clks
- Random static analysis fixes for clk drivers
* clk-qcom-msm8998:
clk: qcom: Make common clk_hw registrations
clk: qcom: smd: Add support for MSM8998 rpm clocks
clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998
clk: qcom: Add missing freq for usb30_master_clk on 8998
clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks
* clk-fractional-parent:
clk: fractional-divider: check parent rate only if flag is set
* clk-x86-mv:
clk: x86: Move clk-lpss.h to platform_data/x86
* clk-SA-fixes:
clk: mediatek: fix platform_no_drv_owner.cocci warnings
clk: tegra: dfll: Fix debugfs_simple_attr.cocci warnings
clk: qoriq: Improve an error message
|
|
'clk-qcom-qcs404' and 'clk-actions-s500' into clk-next
- IPA clk support on Qualcomm RPMh clk controllers
- Support sleeping gpios in clk-gpio type
- Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
- Actions Semi S500 SoC clk support
* clk-qcom-rpmh:
clk: qcom: clk-rpmh: Add IPA clock support
* clk-gpio-sleep:
clk: clk-gpio: add support for sleeping GPIOs in gpio-gate-clk
* clk-stm32mp1:
dt-bindings: clock: remove unused definition for stm32mp1
clk: stm32mp1: fix bit width of hse_rtc divider
clk: stm32mp1: remove unnecessary CLK_DIVIDER_ALLOW_ZERO flag
clk: stm32mp1: fix HSI divider flag
clk: stm32mp1: fix mcu divider table
clk: stm32mp1: set ck_csi as critical clock
clk: stm32mp1: add CLK_SET_RATE_NO_REPARENT to Kernel clocks
clk: stm32mp1: parent clocks update
* clk-qcom-qcs404:
clk: qcom: gcc-qcs404: Add cfg_offset for blsp1_uart3 clock
clk: qcom: clk-rcg2: Introduce a cfg offset for RCGs
clk: qcom: remove empty lines in clk-rcg.h
* clk-actions-s500:
clk: actions: Add clock driver for S500 SoC
dt-bindings: clock: Add DT bindings for Actions Semi S500 CMU
clk: actions: Add configurable PLL delay
|
|
The PCIe PIPE clock in the GCC is fed by the PIPE clock coming from the
PHY, describe this relationship.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Several clock controller drivers define a list of clk_hw devices, and then
register those devices in probe() before using common code to process the
rest of initialization. Extend the common code to accept a list of clk_hw
devices to process, thus eliminating many duplicate implementations.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The CFG/M/N/D registers are at an offset of 0x20 from the CMD register
only for blsp1_uart3 clock, so add it for uart3 only.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Anu Ramanathan <anur@codeaurora.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The RCG CFG/M/N/D register base could be at a different offset than
the CMD register, so introduce a cfg_offset to identify the offset
with respect to the CMD RCGR register.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Anu Ramanathan <anur@codeaurora.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Remove the redundant empty lines crept in.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The clk-rpmh driver only supports on and off RPMh clock resources. Let's
extend the driver by adding support for clocks that are managed by a
different type of RPMh resource known as Bus Clock Manager(BCM). The BCM
is a configurable shared resource aggregator that scales performance
based on a set of frequency points. The Qualcomm IP Accelerator (IPA)
clock is an example of a resource that is managed by the BCM and this a
requirement from the IPA driver in order to scale its core clock.
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The clocks of the CPUSS such as "gcc_cpuss_ahb_clk_src" is a CRITICAL
clock and needs to vote on the active only source of XO, so as to keep
the vote as long as CPUSS is active. Similar rbcpr_clk_src is also has
the same requirement.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Fixes: 06391eddb60a ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
If QCOM_GDSC is disabled, gdsc_register() returns -ENOSYS, which causes
gcc_msm8998_probe() to fail. Select QCOM_GDSC to solve the problem.
gcc-msm8998: probe of 100000.clock-controller failed with error -38
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Fixes: b5f5f525c547 ("clk: qcom: Add MSM8998 Global Clock Control (GCC) driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add rpm smd clocks, PMIC and bus clocks which are required on MSM8998
for clients to vote on.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The gcc_usb3_phy_pipe_clk is generated by the phy, but is also used by
the phy during init. The clock needs to be enabled during the init
sequence, but may not be fully active until after the init sequence is
complete. This causes a catch-22 if the clock status is checked during
enable. As a result, skip the checks to avoid the troubling situation.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The usb30_master_clk supports a 60Mhz frequency, but that is missing from
the table of supported frequencies. Add it.
Fixes: b5f5f525c547 (clk: qcom: Add MSM8998 Global Clock Control (GCC) driver)
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
A branch clock is basically a clock that can be gated for power savings,
but is also what devices/drivers consume. Configuring a branch clock's
rate needs to be done at the source, so for all branch clocks which have
a defined parent, set CLK_SET_RATE_PARENT so that clk_set_rate() calls on
branch clocks can do what is expected. This is important as most drivers
do not check the resulting clock rate after a successful clk_set_rate()
call, thus the driver may get out of sync with the actual hardware state
and weird issues might crop up. This has been observed with issues
getting SDHCI to reliably support "fast" cards such as SDR104.
Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support)
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
* clk-fixes:
clk: qcom: qcs404: Fix gpll0_out_main parent
clk: zynqmp: Off by one in zynqmp_is_valid_clock()
clk: mmp: Off by one in mmp_clk_add()
clk: mvebu: Off by one bugs in cp110_of_clk_get()
arm64: dts: qcom: sdm845-mtp: Mark protected gcc clocks
clk: zynqmp: handle fixed factor param query error
clk: qcom: gcc: Fix board clock node name
clk: meson: axg: mark fdiv2 and fdiv3 as critical
clk: meson-gxbb: set fclk_div3 as CLK_IS_CRITICAL
clk: fixed-factor: fix of_node_get-put imbalance
|
|
- Add resets and make Qualcomm MSM8998 GCC driver more functional
* clk-qcom-8998-resets:
clk: qcom: Drop unused 8998 clock
clk: qcom: Leave mmss noc on for 8998
clk: qcom: Add missing msm8998 resets
clk: qcom: gcc-msm8998: Add clkref clocks
clk: qcom: gcc-msm8998: Disable halt check of UFS clocks
clk: qcom: gcc-msm8998: Drop hmss_dvm and lpass_at
clk: qcom: Enumerate remaining msm8998 resets
clk: qcom: Add xo dummy clk on msm8998
clk: qcom: Fix MSM8998 resets
|
|
gcc_lpass_trig_clk is not used downstream, therefore there is no reason to
expect it to be needed for clients. Let's remove it because messing with
the clock has been observed to cause Linux hangs when the qdss_clk is
initialized by rpmcc.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support)
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Similar to other qcom targets, gcc_mmss_noc_cfg_ahb_clk should not be
disabled. Any mmss access depends on this clock, and its been observed
that enabling mmssnoc_axi_rpm_clk with rpmcc results in an implicit
access to mmss and will crash the system if gcc_mmss_noc_cfg_ahb_clk is
disabled.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support)
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
and 'clk-ops-const' into clk-next
- Make devm_of_clk_add_hw_provider() use parent dt node if necessary
- Various SPDX taggings
- Mark clk_ops const when possible
* clk-managed-registration:
clk: bd718x7: Initial support for ROHM bd71837/bd71847 PMIC clock
clk: apcs-msm8916: simplify probe cleanup by using devm
clk: clk-twl6040: Free of_provider at remove
clk: rk808: use managed version of of_provider registration
clk: clk-hi655x: Free of_provider at remove
clk: of-provider: look at parent if registered device has no provider info
clk: Add kerneldoc to managed of-provider interfaces
* clk-spdx:
clk: Tag basic clk types with SPDX
clk: Tag clk core files with SPDX
clk: bcm2835: Switch to SPDX identifier
* clk-remove-basic:
clk: Loongson1: Remove usage of CLK_IS_BASIC
clk: samsung: s3c2410: Remove usage of CLK_IS_BASIC
clk: versatile: sp810: Remove usage of CLK_IS_BASIC
clk: hisilicon: Remove usage of CLK_IS_BASIC
clk: h8300: Remove usage of CLK_IS_BASIC
clk: axm5516: Remove usage of CLK_IS_BASIC
clk: st: Remove usage of CLK_IS_BASIC
clk: renesas: Remove usage of CLK_IS_BASIC
* clk-ops-const:
clk: s2mps11: constify clk_ops structure
clk: pxa: constify clk_ops structures
clk: pistachio: constify clk_ops structures
clk: palmas: constify clk_ops structure
clk: max77686: constify clk_ops structure
|
|
- Qualcomm SDM845 audio subsystem clks
* clk-qcom-sdm845-lpass:
clk: qcom: Add lpass clock controller driver for SDM845
dt-bindings: clock: Introduce QCOM LPASS clock bindings
dt-bindings: clock: Update GCC bindings for protected-clocks
|
|
'clk-qcom-spi' and 'clk-qcom-videocc-binding' into clk-next
- Qualcomm SDM845 GPU clock controllers
- Qualcomm QCS404 RPM clk support
* clk-qcom-kconfig:
clk: qcom: Move to menuconfig and reduce lines
* clk-qcom-gpucc:
dt-bindings: clock: qcom: Fix the xo parent in gpucc example
clk: qcom: gpu_cc_gmu_clk_src has 5 parents, not 6
clk: qcom: Add a dummy enable function for GX gdsc
clk: qcom: gdsc: Don't override existing gdsc pd functions
clk: qcom: Add graphics clock controller driver for SDM845
dt-bindings: clock: Introduce QCOM Graphics clock bindings
* clk-qcom-qcs404-rpm:
clk: qcom: smd: Add support for QCS404 rpm clocks
* clk-qcom-spi:
clk: qcom: msm8916: Additional clock rates for spi
* clk-qcom-videocc-binding:
dt-bindings: clock: Require #reset-cells in sdm845-videocc
|
|
commit c0cb7c7e7164 ("clk: qcom: Enumerate remaining msm8998 resets")
missed two USB2 resets. Add them.
Fixes: c0cb7c7e7164 ("clk: qcom: Enumerate remaining msm8998 resets")
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
We duplicate the 'depends on' in almost every Kconfig here, and it's
getting out of hand now that we have tens of options for various SoC
drivers here. Let's clean it up a little by making a menuconfig for a
submenu and adding an if wrapper around the driver section.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
gpll0_out_main parent is cxo so fix it.
Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add clkref clocks for usb3, hdmi, ufs, pcie, and usb2. They are all
sourced off CXO_IN, so parent them off "xo" until a proper link to the
rpmcc can be described in DT.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Drop the halt check of the UFS symbol clocks, in accordance with other
platforms. This makes clk_disable_unused() happy and makes it possible
to turn the clocks on again without an error.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Disabling gcc_hmss_dvm_bus_clk and gcc_lpass_at_clk causes the board to
lock up, and by that preventing the kernel to boot without
clk_ignore_unused.
gcc_hmss_dvm_bus_clk is marked always-on downstream, but not referenced,
and gcc_lpass_at_clk isn't mentioned. So let's remove them until they
are needed by some client.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The current list of defined resets is incomplete compared to what the
hardware implements. Enumerate the remaining resets according to the
hardware documentation.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
We have this dummy factor clk in place to workaround a missing rpm clk
driver that can manage the XO clk state. Add it in to match what we do
on msm8996.
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
use devm variant for of_provider registration.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
[sboyd@kernel.org: Drop unused parent pointer]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The offsets for the defined BCR reset registers does not match the hardware
documentation. Update the values to match the hardware documentation.
Fixes: b5f5f525c547 (clk: qcom: Add MSM8998 Global Clock Control (GCC) driver)
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add support for the lpass clock controller found on SDM845 based devices.
This would allow lpass peripheral loader drivers to control the clocks to
bring the subsystem out of reset.
LPASS clocks present on the global clock controller would be registered
with the clock framework based on the protected-clock flag. Also do not
gate these clocks if they are left unused, as the lpass clocks require
the global clock controller lpass clocks to be enabled before they are
accessed. Mark the GCC lpass clocks as CRITICAL, for the LPASS clock
access.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add SPI friendly clock rates to the spi freq table.
Today it's not possible to use SPI at lower than 960Khz.
This patch adds 100/250/500/1000 kHz configs to the table.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
In an earlier version of commit 453361cdd757 ("clk: qcom: Add graphics
clock controller driver for SDM845") there were 6 listed parents for
"gpu_cc_gmu_clk_src". In the version that landed there were 5.
...but "num_parents" was still left at 6. On my system this goes boom
at bootup.
Fixes: 453361cdd757 ("clk: qcom: Add graphics clock controller driver for SDM845")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
* clk-protected-binding:
clk: qcom: Support 'protected-clocks' property
dt-bindings: clk: Introduce 'protected-clocks' property
|
|
Most of the time the CPU should not be touching the GX
domain on the GPU except for a very special use case when
the CPU needs to force the GX headswitch off. Add a
dummy enable function for the GX gdsc to simulate success
so that the pm_runtime reference counting is correct.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
In extreme cases an individual gdsc may wish to override the
power domain enable or disable callback functions for their own
purposes. Only set the generic gdsc callback if the function pointers
are not already set.
Acked-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add support for the graphics clock controller found on SDM845
based devices. This would allow graphics drivers to probe and
control their clocks.
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
[sboyd@kernel.org: Collapse return in probe into less lines]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Certain firmware configurations "protect" clks and cause the entire
system to reboot when a non-secure OS such as Linux tries to read or
write protected clk registers. But other firmware configurations allow
reading or writing the same registers, and they may actually require
that the OS use the otherwise locked down clks. Support the
'protected-clocks' property by never registering these protected clks
with the common clk framework. This way, when firmware is protecting
these clks we won't have the chance to ever read or write these
registers and take down the entire system.
Cc: Taniya Das <tdas@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Device tree node name are not supposed to have "_" in them so fix the
node name use of xo_board to xo-board
Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add rpm smd clocks, PMIC and bus clocks which are required on QCS404
for clients to vote on.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Anu Ramanathan <anur@codeaurora.org>
[bjorn: Dropped cxo, voter clocks and static initialization]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
* clk-fixed-rate-remove:
clk: fixed-rate: fix of_node_get-put imbalance
* clk-qcom-cleanup:
clk: qcom: Remove unused arrays in SDM845 GCC
|
|
'clk-smp2s11-match' into clk-next
- iMX6 MMDC clks
- Qualcomm Krait CPU clk support
* clk-imx6-mmdc:
clk: imx6q: add mmdc0 ipg clock
clk: imx6sl: add mmdc ipg clocks
clk: imx6sll: add mmdc1 ipg clock
clk: imx6sx: add mmdc1 ipg clock
clk: imx6ul: add mmdc1 ipg clock
* clk-qcom-krait:
clk: qcom: Add safe switch hook for krait mux clocks
dt-bindings: clock: Document qcom,krait-cc
clk: qcom: Add Krait clock controller driver
dt-bindings: arm: Document qcom,kpss-gcc
clk: qcom: Add KPSS ACC/GCC driver
clk: qcom: Add support for Krait clocks
clk: qcom: Add IPQ806X's HFPLLs
clk: qcom: Add MSM8960/APQ8064's HFPLLs
dt-bindings: clock: Document qcom,hfpll
clk: qcom: Add HFPLL driver
clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
ARM: Add Krait L2 register accessor functions
* clk-rockchip:
clk: rockchip: Fix static checker warning in rockchip_ddrclk_get_parent call
clk: rockchip: use the newly added clock-id for hdmi on RK3066
clk: rockchip: add clock-id for HCLK_HDMI on rk3066
clk: rockchip: fix wrong mmc sample phase shift for rk3328
clk: rockchip: improve rk3288 pll rates for better hdmi output
* clk-smp2s11-match:
clk: s2mps11: Add used attribute to s2mps11_dt_match
clk: s2mps11: Fix matching when built as module and DT node contains compatible
|
|
- Qualcomm QCS404 GCC support
* clk-qcom-qcs404:
clk: qcom: gcc: Add global clock controller driver for QCS404
clk: qcom: Export clk_alpha_pll_configure()
|
|
- Qualcomm SDM660 GCC support
* clk-qcom-sdm660:
clk: qcom: gcc-sdm660: Add MODULE_LICENSE
clk: qcom: Add Global Clock controller (GCC) driver for SDM660
|
|
- Qualcomm SDM845 camera clock controller
* clk-qcom-sdm845-camcc:
clk: qcom: Add camera clock controller driver for SDM845
dt-bindings: clock: Introduce QCOM Camera clock bindings
* clk-mtk-unused:
clk: mediatek: remove unused array audio_parents
|
|
- Use updated printk format for OF node names
- Fix TI code to only search DT subnodes
- Various static analysis finds
* clk-dt-name:
clk: Convert to using %pOFn instead of device_node.name
* clk-ti-of-node:
clk: ti: fix OF child-node lookup
* clk-sa:
clk: mvebu: armada-37xx-tbg: Switch to clk_get and balance it in probe
reset: hisilicon: fix potential NULL pointer dereference
clk: cdce925: release child device nodes
clk: qcom: clk-branch: Use true and false for boolean values
|
|
'clk-qcom-8996-missing' and 'clk-qcom-qspi' into clk-next
- Tag various drivers with SPDX license tags
- Support dynamic frequency switching (DFS) on qcom SDM845 GCC
- Only use s2mps11 dt-binding defines instead of redefining them in the driver
- Add some more missing clks to qcom MSM8996 GCC
- Quad SPI clks on qcom SDM845
* clk-spdx:
clk: mvebu: use SPDX-License-Identifier
clk: renesas: Convert to SPDX identifiers
clk: renesas: use SPDX identifier for Renesas drivers
clk: s2mps11,s3c64xx: Add SPDX license identifiers
clk: max77686: Add SPDX license identifiers
* clk-qcom-dfs:
clk: qcom: Allocate space for NULL terimation in DFS table
clk: qcom: gcc: Register QUPv3 RCGs for DFS on SDM845
clk: qcom: Add support for RCG to register for DFS
* clk-smp2s11-include:
clk: s2mps11: Use existing defines from bindings for clock IDs
* clk-qcom-8996-missing:
clk: qcom: Add some missing gcc clks for msm8996
* clk-qcom-qspi:
clk: qcom: Add qspi (Quad SPI) clocks for sdm845
clk: qcom: Add qspi (Quad SPI) clock defines for sdm845 to header
|
|
This change removes a parent map and parent name array that
appear to be completely unreferenced.
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
