summaryrefslogtreecommitdiff
path: root/drivers/clk/socfpga
AgeCommit message (Collapse)Author
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-19clk: socfpga: Fix the smplsel on Arria10 and Stratix10Dinh Nguyen
The smplsel bits for the SDMMC clock on Arria10 and Stratix10 platforms are offset by 1 additional bit. Add a new macro SYSMGR_SDMMC_CTRL_SET_AS10 for usage on the Arria10 and Stratix10 platforms. Fixes: 5611a5ba8e54 ("clk: socfpga: update clk.h so for Arria10 platform to use") Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-22clk: socfpga: allow for multiple parents on Arria10 periph clocksDinh Nguyen
There are some Arria10 clocks of type "altr,socfpga-a10-perip-clk" that can have multiple parents. Fix up the __socfpga_periph_init() to call of_clk_parent_fill() that will return the appropriate number of parents. Also, update __socfpga_gate_init() to call of_clk_parent_fill() helper function. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-08clk: socfpga: fix __init annotationArnd Bergmann
clang found a bug with the __socfpga_pll_init definition: drivers/clk/socfpga/clk-pll-a10.c:77:15: error: '__section__' attribute only applies to functions and global variables This moves the __init annotation to the right place so the function actually gets discarded. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-24clk: socfpga: Add a second parent option for the dbg_base_clkDinh Nguyen
The debug base clock can be bypassed from the main PLL to the OSC1 clock. The bypass register is the staysoc1(0x10) register that is in the clock manager. This patch adds the option to get the correct parent for the debug base clock. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28clk: socfpga: switch to GENMASK()Andy Shevchenko
Convert the code to use GENMASK() helper instead of div_mask() macro. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20clk: socfpga: Remove clk.h and clkdev.h includesStephen Boyd
Clock provider drivers generally shouldn't include clk.h because it's the consumer API. Remove the include here because this is a provider driver. The clkdev.h include isn't used either, remove it and add in slab.h to make sure things keep compiling. Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-09clk: socfpga: remove a stray tabDan Carpenter
This line was indented too far. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-06-05clk: socfpga: make use of of_clk_parent_fill helper functionDinh Nguyen
Use of_clk_parent_fill to fill in the parent clock's array. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-21clk: socfpga: add a clock driver for the Arria 10 platformDinh Nguyen
The clocks on the Arria 10 platform is a bit different than the Cyclone/Arria 5 platform that it should just have it's own driver. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-21clk: socfpga: update clk.h so for Arria10 platform to useDinh Nguyen
There are 5 possible parent clocks for the SoCFPGA Arria10. Move the define SYSMGR_SDMMC_CTRL_SET and streq() to clk.h so that the Arria clock driver can use. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14clk: socfpga: Silence sparse warningStephen Boyd
drivers/clk/socfpga/clk-periph.c:79:39: warning: Using plain integer as NULL pointer Cc: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14clk: socfpga: Silence sparse warningStephen Boyd
drivers/clk/socfpga/clk-gate.c:227:40: warning: Using plain integer as NULL pointer Cc: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-05-12Merge tag 'socfpga-clk-update-for-v3.16' of ↵Mike Turquette
git://git.rocketboards.org/linux-socfpga-next into clk-next-socfpga Adds support getting the divider registers for the MAIN PLL that was once thought to be hidden.
2014-05-12clk: socfpga: add divider registers to the main pll outputsDinh Nguyen
The C0(mpu_clk), C1(main_clk), and C2(dbg_base_clk) outputs from the main PLL go through a pre-divider before coming into the system. These registers were hidden for the CycloneV platform, but are now used for the ArriaV platform. This patch updates the clock driver to read the div-reg property for the socfpga-periph-clk clocks. Also moves the div_mask define to clk.h for re-use. Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-04-30clk: socfpga: fix clock driver for 3.15Dinh Nguyen
commit [1771b10d6 clk: respect the clock dependencies in of_clk_init] exposed a flaw in the socfpga clock driver and prevents the platform from booting on 3.15-rc1. Because the "altr,clk-mgr" is not really a clock, it should not be using CLK_OF_DECLARE, instead we should be mapping the clk-mgr's base address one of the functional clock init function. Use the socfpga_pll_init function to map the clk_mgr_base_addr as this clock should always be initialized first. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Tested-by: Pavel Machek <pavel@denx.de>
2014-03-18clk: socfpga: Fix section mismatch warningDinh Nguyen
WARNING: drivers/clk/socfpga/built-in.o(.data+0xc0): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_pll_init() The variable socfpga_child_clocks references the function __init socfpga_pll_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console WARNING: drivers/clk/socfpga/built-in.o(.data+0x184): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_periph_init() The variable socfpga_child_clocks references the function __init socfpga_periph_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console WARNING: drivers/clk/socfpga/built-in.o(.data+0x248): Section mismatch in reference from the variable socfpga_child_clocks to the function .init.text:socfpga_gate_init() The variable socfpga_child_clocks references the function __init socfpga_gate_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Reported-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-02-26clk: socfpga: Support multiple parents for the pll clocksDinh Nguyen
The PLLs can be from 3 different sources: osc1, osc2, or the f2s_ref_clk. Update the clock driver to be able to get the correct parent. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-02-26clk: socfpga: Fix integer overflow in clock calculationDinh Nguyen
Use 64-bit integer for calculating clock rate. Also use do_div for the 64-bit division. Signed-off-by: Graham Moore <grmoore@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-02-18clk: socfpga: Add a clk-phase property to the "altr,socfpga-gate-clk"Dinh Nguyen
The clk-phase property is used to represent the 2 clock phase values that is needed for the SD/MMC driver. Add a prepare function to the clk_ops, that will use the syscon driver to set sdmmc_clk's phase shift that is located in the system manager. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> --- v9: none v8: Use degrees in the clk-phase binding property v7: Add dts property to represent the clk phase of the sdmmc_clk. Add a prepare function to the gate clk that will toggle clock phase setting. Remove the "altr,socfpga-sdmmc-sdr-clk" clock type. v6: Add a new clock type "altr,socfpga-sdmmc-sdr-clk" that will be used to set the phase shift settings. v5: Use the "snps,dw-mshc" binding v4: Use the sdmmc_clk prepare function to set the phase shift settings v3: Not use the syscon driver because as of 3.13-rc1, the syscon driver is loaded after the clock driver. v2: Use the syscon driver
2014-02-18clk: socfpga: split clk codeSteffen Trumtrar
Move the different kinds of clocks into their own files. The reason is to aid readability of the code. This also goes along with the other SoC-specific clock drivers. The split introduces new structs for the three types of clocks and uses them. Other changes are not done to the code. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-02-18clk: socfpga: fix define typoSteffen Trumtrar
It should be SOCFPGA instead of SOCFGPA. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-02-18clk: socfpga: remove unused fieldSteffen Trumtrar
The clk_name field from the socfpga_clk struct is unused. Remove it. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-02-18clk: socfpga: Remove socfpga_init_clocksDinh Nguyen
The only thing that socfpga_init_clocks was doing is setting up the smp_twd clk. Now that twd-timer's clock phandle is populated in the DTS, we can remove this function. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-02-18clk: socfpga: Look for the GPIO_DB_CLK by its offsetDinh Nguyen
After the patch: "clk: socfpga: Map the clk manager base address in the clock driver" The clk->name field in socfpga_clk_recalc_rate() was getting cleared. Replace looking for the GPIO_DB_CLK by its divider offset instead. Also rename the define SOCFPGA_DB_CLK_OFFSET -> SOCFPGA_GPIO_DB_CLK_OFFSET, as this represents the GPIO_DB_CLK. Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-02-18clk: socfpga: Map the clk manager base address in the clock driverDinh Nguyen
The clk manager's base address was being mapped in SOCFPGA's arch code and being extern'ed out to the clock driver. This method is not correct, and the arch code was not really doing anything with that clk manager anyways. This patch moves the mapping of the clk manager's base address in the clock driver itself. Cleans up CLK_OF_DECLARE() into a single registration of all the clocks. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> --- v2: Use a static declaration for the clk_mgr_base_addr. Clean up the CLK_OF_DECLARE() as suggested by Arnd.
2013-12-19clk: socfpga: Use NULL instead of 0Sachin Kamat
'div_reg' is a pointer. Assign NULL instead of 0. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-11-27clk: socfpga: Remove check for "reg" property in socfpga_clk_initDinh Nguyen
The function socfpga_clk_init() can support clocks that do not have a divider register, but a fixed-divider that can be read from DTS. Therefore, the "reg" property is not a failing condition for socfpga_clk_init(). Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-07clk: socfpga: Fix incorrect sdmmc clock nameDinh Nguyen
The SD/MMC clock is named "sdmmc_clk", and NOT "mmc_clk". Because of this, the SD driver was getting the incorrect clock value. This prevented the SD driver from initializing correctly. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Olof Johansson <olof@lixom.net> Reviewed-by: Pavel Machek <pavel@denx.de> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-11ARM: socfpga: Add support to gate peripheral clocksDinh Nguyen
Add support to gate the clocks that directly feed peripherals. For clocks with multiple parents, add the ability to determine the correct parent, and also set parents. Also add support to calculate and set the clocks' rate. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Acked-by: Mike Turquette <mturquette@linaro.org> Cc: Mike Turquette <mturquette@linaro.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Olof Johansson <olof@lixom.net> Cc: Pavel Machek <pavel@denx.de> CC: <linux@arm.linux.org.uk> v4: - Add Acked-by: Mike Turquette v3: - Addressed comments from Pavel v2: - Fix space/indent errors - Add streq for strcmp == 0 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-14ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entriesDinh Nguyen
With this patch, the socfpga clk driver is able to query the clock and clock rates appropriately. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-07-19ARM: socfpga: initial support for Altera's SOCFPGA platformDinh Nguyen
Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>