summaryrefslogtreecommitdiff
path: root/drivers/clk/uniphier
AgeCommit message (Collapse)Author
2020-01-04clk: uniphier: Add SCSSI clock gate for each channelKunihiko Hayashi
SCSSI has clock gates for each channel in the SoCs newer than Pro4, so this adds missing clock gates for channel 1, 2 and 3. And more, this moves MCSSI clock ID after SCSSI. Fixes: ff388ee36516 ("clk: uniphier: add clock frequency support for SPI") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://lkml.kernel.org/r/1577410925-22021-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-08drivers/clk: convert VL struct to struct_sizeStephen Kitt
There are a few manually-calculated variable-length struct allocations left, this converts them to use struct_size. Found with the following git grep command git grep -A1 'kzalloc.*sizeof[^_].*+' Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lkml.kernel.org/r/20190927185110.29897-1-steve@sk2.org Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com> [sboyd@kernel.org: Add grep command] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-21clk: uniphier: Fix update register for CPU-gearKunihiko Hayashi
Need to set the update bit in UNIPHIER_CLK_CPUGEAR_UPD to update the CPU-gear value. Fixes: d08f1f0d596c ("clk: uniphier: add CPU-gear change (cpufreq) support") Cc: linux-stable@vger.kernel.org Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-25clk: uniphier: add clock frequency support for SPIKunihiko Hayashi
Add clock control for SPI controller on UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-25clk: uniphier: add more USB3 PHY clocksMasahiro Yamada
Add USB3 PHY clocks where missing. Use fixed-factor clocks for those without gating. For clarification, prefix clock names with 'ss' or 'hs'. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-25clk: uniphier: add NAND 200MHz clockMasahiro Yamada
The Denali NAND controller IP needs three clocks: - clk: controller core clock - clk_x: bus interface clock - ecc_clk: clock at which ECC circuitry is run Currently, only the first one (50MHz) is provided. The rest of the two clock ports must be connected to the 200MHz clock line. Add this. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-15clk: uniphier: add LD11/LD20 stream demux system clockKatsuhiro Suzuki
Add clock for MPEG2 transport stream I/O and demux system (HSC) on UniPhier LD11/LD20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-05clk: uniphier: add additional ethernet clock lines for Pro4Kunihiko Hayashi
Pro4 SoC has clock lines for Giga-bit feature and ethernet phy, and these are mandatory to activate the ethernet controller. This adds support for the clock lines. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-05clk: uniphier: add SATA clock control supportKunihiko Hayashi
Add clock control for SATA controller on UniPhier SoCs. This adds support for PXs2, LD20 and PXs3. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-05clk: uniphier: add PCIe clock control supportKunihiko Hayashi
Add clock control for PCIe controller on UniPhier SoCs. This adds support for Pro5, LD20 and PXs3. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-23clk: uniphier: add ethernet clock control support for PXs3Kunihiko Hayashi
Add clock control for ethernet controller on PXs3 SoC. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19clk: uniphier: add Pro4/Pro5/PXs2 audio system clockKatsuhiro Suzuki
Add clock for audio subsystem (AIO) on UniPhier Pro4/Pro5/PXs2 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2017-11-17Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have two changes to the core framework this time around. The first being a large change that introduces runtime PM support to the clk framework. Now we properly call runtime PM operations on the device providing a clk when the clk is in use. This helps on SoCs where the clks provided by a device need something to be powered on before using the clks, like power domains or regulators. It also helps power those things down when clks aren't in use. The other core change is a devm API addition for clk providers so we can get rid of a bunch of clk driver remove functions that are just doing of_clk_del_provider(). Outside of the core, we have the usual addition of clk drivers and smattering of non-critical fixes to existing drivers. The biggest diff is support for Mediatek MT2712 and MT7622 SoCs, but those patches really just add a bunch of data. By the way, we're trying something new here where we build the tree up with topic branches. We plan to work this into our workflow so that we don't step on each other's toes, and so the fixes branch can be merged on an as-needed basis. Summary: Core: - runtime PM support for clk providers - devm API for of_clk_add_hw_provider() New Drivers: - Mediatek MT2712 and MT7622 - Renesas R-Car V3M SoC Updates: - runtime PM support for Samsung exynos5433/exynos4412 providers - removal of clkdev aliases on Samsung SoCs - convert clk-gpio to use gpio descriptors - various driver cleanups to match kernel coding style - Amlogic Video Processing Unit VPU and VAPB clks - sigma-delta modulation for Allwinner audio PLLs - Allwinner A83t Display clks - support for the second display unit clock on Renesas RZ/G1E - suspend/resume support for Renesas R-Car Gen3 CPG/MSSR - new clock ids for Rockchip rk3188 and rk3368 SoCs - various 'const' markings on clk_ops structures - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: stm32h7: fix test of clock config clk: pxa: fix building on older compilers clk: sunxi-ng: a83t: Fix i2c buses bits clk: ti: dra7-atl-clock: fix child-node lookups clk: qcom: common: fix legacy board-clock registration clk: uniphier: fix DAPLL2 clock rate of Pro5 clk: uniphier: fix parent of miodmac clock data clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu' clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep() clk: hi3660: fix incorrect uart3 clock freqency clk: kona-setup: Delete error messages for failed memory allocations ARC: clk: fix spelling mistake: "configurarion" -> "configuration" clk: cdce925: remove redundant check for non-null parent_name clk: versatile: Improve sizeof() usage clk: versatile: Delete error messages for failed memory allocations clk: ux500: Improve sizeof() usage clk: ux500: Delete error messages for failed memory allocations clk: spear: Delete error messages for failed memory allocations clk: ti: Delete error messages for failed memory allocations clk: mmp: Adjust checks for NULL pointers ...
2017-11-14clk: uniphier: fix DAPLL2 clock rate of Pro5Masahiro Yamada
The parent of DAPLL2 should be DAPLL1. Fix the clock connection. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-14clk: uniphier: fix parent of miodmac clock dataMasahiro Yamada
The "miodmac" is not a child of "stdmac". They are independent from each other. Fix it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-03Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One fix for USB clks on Uniphier PXs3 SoCs" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: uniphier: fix clock data for PXs3
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-24clk: uniphier: fix clock data for PXs3Masahiro Yamada
Fix reg offsets of USB clocks. Fixes: 736de651a836 ("clk: uniphier: add PXs3 clock data") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-31clk: uniphier: add video input subsystem clockKatsuhiro Suzuki
Add a clock for video input subsystem (EXIV) on UniPhier LD11/LD20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-31clk: uniphier: add audio system clockKatsuhiro Suzuki
Add clock for audio subsystem (AIO) and SoC internal audio codec (EVEA) on UniPhier LD11/LD20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-31clk: uniphier: add PXs3 clock dataMasahiro Yamada
Add basic clock data for Socionext's new SoC PXs3. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-30clk: uniphier: add ethernet clock control supportKunihiko Hayashi
Add clock control for ethernet controller on Pro4, PXs2, LD11 and LD20. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-03clk: uniphier: remove sLD3 SoC supportMasahiro Yamada
This SoC is too old. It is difficult to maintain any longer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-21clk: uniphier: provide NAND controller clock rateMasahiro Yamada
This allows the NAND driver to get the clock rate via clk_get_rate(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-02-03clk: uniphier: add eMMC clock for LD11 and LD20 SoCsMasahiro Yamada
Add clock for the Cadence eMMC controller on LD11/LD20. For the other SoCs, the clock for the eMMC controller is included in the MIO/SD control block. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-02-03clk: uniphier: add NAND clock for all UniPhier SoCsMasahiro Yamada
Add clock line for the Denali NAND controller. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-26clk: uniphier: continue probing even if some clocks fail to registerMasahiro Yamada
Do not let the entire probe function fail even if some clocks fail to register. Let's continue with succeeded clocks. This will give the system more chances to boot and allow us to investigate the cause of the failure. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-09clk: uniphier: remove unneeded #include <linux/delay.h>Masahiro Yamada
This include was needed to suppress build error when this driver was initially merged because <linux/regmap.h> did not include <linux/delay.h> at that time. (developers' headache across sub-systems) The root cause has been fixed by commit adf08d481b52 ("regmap: include <linux/delay.h> from include/linux/regmap.h"), so this line can be dropped now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-07clk: uniphier: add cpufreq data for LD11, LD20 SoCsMasahiro Yamada
Add more data to 64bit SoCs for the cpufreq support. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-07clk: uniphier: add CPU-gear change (cpufreq) supportMasahiro Yamada
Core support code for CPU frequency changes, which will be used by the generic cpufreq driver. The register view is different from the generic clk-mux; it has a separate status register, and an update bit to load the register setting. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-19clk: uniphier: rename MIO clock to SD clock for Pro5, PXs2, LD20 SoCsMasahiro Yamada
I made a mistake as for naming for this block. The MIO block is not implemented for these 3 SoCs in the first place. The current naming will be a trouble if an SoC with both MIO and SD-ctrl blocks appear in the future. This driver has just been merged in the previous merge window. Rename it before the release. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-19clk: uniphier: fix memory overrun bugMasahiro Yamada
The first loop of this "for" statement writes memory beyond the allocated clk_hw_onecell_data. It should be: for (clk_num--; clk_num >= 0; clk_num--) ... Or more simply: while (--clk_num >= 0) ... Fixes: 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: uniphier: fix type of variable passed to regmap_read()Masahiro Yamada
The 3rd argument of regmap_read() takes a pointer to unsigned int. This driver is saved just because u32 happens to be typedef'ed as unsigned int, but we should not rely on that fact. Change the variable type just in case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: uniphier: add system clock support for sLD3 SoCMasahiro Yamada
I do not know why, but I missed to add this compatible string in the initial commit of this driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16clk: uniphier: add clock data for UniPhier SoCsMasahiro Yamada
Add clock data arrays for all UniPhier SoCs with a binding document. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16clk: uniphier: add core support code for UniPhier clock driverMasahiro Yamada
This includes UniPhier clock driver code, except SoC-specific data arrays. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>