summaryrefslogtreecommitdiff
path: root/drivers/clk/zte
AgeCommit message (Collapse)Author
2017-12-21clk: move clock common macros out from vendor directoriesChunyan Zhang
These macros are used by more than one SoC vendor platforms, avoid to have many copies of these code, this patch moves them to the common header file which every clock drivers can access to. Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-30clk: zte: constify clk_div_tableArvind Yadav
clk_div_table are not supposed to change at runtime. All functions working with clk_div_table provided by <linux/clk-provider.h> work with const clk_div_table. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19clk: zx296718: export I2S mux clocksShawn Guo
Export I2S mux clocks, so that device tree can refer to them for setting a better parent clock for I2S work clock. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-12clk: zte: Mark pll config tables as constStephen Boyd
These should be const. Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2017-04-12clk: zte: add pll_vga clock for zx296718Shawn Guo
It adds zx296718 pll_vga clock for VGA support, so that VGA device can get required pixel rate from clock driver for different display mode. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2017-04-12clk: zte: pd_bit is not 0 on zx296718Shawn Guo
The bit 0 of PLL_CFG0 register is not powerdown on zx296718, but part of of postdiv2 field. The consequence is that functions like hw_to_idx() and zx_pll_enable() will end up tampering the postdiv2 of the PLL. Let's fix it by defining pd_bit 0xff which is obviously invalid for a bit position and having PLL driver check the validity before operating on the bit. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2017-04-12clk: zte: set CLK_SET_RATE_PARENT for a few zx296718 clocksShawn Guo
To support VOU VGA display driver with different modes, we need to set flag for a few clocks, so that clk_set_rate() call in VOU driver can get VGA device desired pixel rate. While at it, the divider between pll_vga and clk_vga gets corrected, as it's 1:1 instead of 1:2. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2017-02-10clk: zte: add i2s clocks for zx296718Baoyou Xie
The i2s related clock support is missing from the existing zx296718 clock driver. This patch adds it, so that the upstream ZX I2S driver can work out. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-09clk: zte: add audio clocks for zx296718Jun Nie
The audio related clock support is missing from the existing zx296718 clock driver. Let's add it, so that the upstream ZX SPDIF driver can work for HDMI audio support. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> [sboyd@codeaurora.org: Staticize some more structures] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-09clk: zx296718: do not panic on failureShawn Guo
Instead of using panic, we should give an error message and return error code when of_clk_add_hw_provider() call fails. Since we have error prompt for failures, the "init over" pr_info output isn't really necessary but becomes a debug noise. So let's clean it up along the way. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-23clk: zx296718: register driver earlier with core_initcallShawn Guo
Clock driver should be registered with an earlier initcall than module_init which is used by most of client device drivers. Otherwise, probing of these client drivers will likely be deferred due to that calls into clk API will return -EPROBE_DEFER. Deferred probing is not a problem for most subsystems, but could bring some side effect for particular subsystem, like display. On ZX296718 platform, we get Linux logo and boot log lost from display device, just because the DRM/KMS driver gets -EPROBE_DEFER from devm_clk_get() call. Let's use core_initcall (qcom and a few other clk drivers use that) for driver registration to avoid those unnecessary -EPROBE_DEFER and get rid of the side effect with ZX296718 display system. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16clk: zx: fix pointer case warningsArnd Bergmann
The zx296718 clock driver has a creative way of assigning the register values for each clock, by initializing an __iomem pointer to an offset and then later adding the base (from ioremap) on top with a cast to u64. This fail on all 32-bit architectures during compile testing: drivers/clk/zte/clk-zx296718.c: In function 'top_clocks_init': drivers/clk/zte/clk-zx296718.c:554:35: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] zx296718_pll_clk[i].reg_base += (u64)reg_base; drivers/clk/zte/clk-zx296718.c:579:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/clk/zte/clk-zx296718.c:592:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] It would be nice to avoid all the casts, but I decided to simply shut up the warnings by changing the type from u64 to uintptr_t, which does the right thing in practice. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ca0233285a93 ("clk: zx: register ZX296718 clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16clk: zx296718: use builtin_platform_driver to simplify the codeWei Yongjun
Use the builtin_platform_driver() macro to make the code simpler. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14clk: zx: register ZX296718 clocksJun Nie
The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14clk: zx: reform pll config info to ease code extensionJun Nie
Add power down bit and pll lock bit in pll config structure to ease new SoC support. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-04-15clk: zte: Remove CLK_IS_ROOTStephen Boyd
This flag is a no-op now. Remove usage of the flag. Cc: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28clk: zx: Constify parent names in clock init dataJun Nie
The array of parent names can be made as array of const pointers to const strings. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28clk: zx: Add audio and GPIO clock for zx296702Jun Nie
Add SPDIF/I2S and GPIO clock for zx296702 Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28clk: zx: Add audio div clock method for zx296702Jun Nie
Add SPDIF/I2S divider clock method for zx296702 Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-11clk: zx: add clock support to zx296702Jun Nie
It adds a clock driver for zx296702 SoC to register the clock tree to Common Clock Framework. All the clocks of bus topology and some the peripheral clocks are ready with this commit. Some missing leaf clocks for peripherals will be added later when needed. Signed-off-by: Jun Nie <jun.nie@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>