summaryrefslogtreecommitdiff
path: root/drivers/clk/zynqmp
AgeCommit message (Collapse)Author
2020-06-10Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...
2020-05-26clk: zynqmp: Make zynqmp_clk_get_max_divisor staticYueHaibing
Fix sparse warning: drivers/clk/zynqmp/divider.c:259:5: warning: symbol 'zynqmp_clk_get_max_divisor' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lkml.kernel.org/r/20200403083040.37748-1-yuehaibing@huawei.com Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: zynqmp: Update fraction clock check from custom type flagsTejas Patel
Older firmware version sets BIT(13) in clkflag to mark a divider as fractional divider. Updated firmware version sets BIT(4) in type flags to mark a divider as fractional divider since BIT(13) is defined as CLK_DUTY_CYCLE_PARENT in the common clk framework flags. To support both old and new firmware version, consider BIT(13) from clkflag and BIT(4) from type_flag to check if divider is fractional or not. To maintain compatibility BIT(13) of clkflag in firmware will not be used in future for any purpose and will be marked as unused. Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lkml.kernel.org/r/1584048699-24186-3-git-send-email-jolly.shah@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: zynqmp: Add support for custom type flagsRajan Vaja
Store extra custom type flags received from firmware. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lkml.kernel.org/r/1584048699-24186-2-git-send-email-jolly.shah@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: zynqmp: fix memory leak in zynqmp_register_clocksQuanyang Wang
This is detected by kmemleak running on zcu102 board: unreferenced object 0xffffffc877e48180 (size 128): comm "swapper/0", pid 1, jiffies 4294892909 (age 315.436s) hex dump (first 32 bytes): 64 70 5f 76 69 64 65 6f 5f 72 65 66 5f 64 69 76 dp_video_ref_div 31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1............... backtrace: [<00000000c9be883b>] __kmalloc_track_caller+0x200/0x380 [<00000000f02c3809>] kvasprintf+0x7c/0x100 [<00000000e51dde4d>] kasprintf+0x60/0x80 [<0000000092298b05>] zynqmp_register_clocks+0x29c/0x398 [<00000000faaff182>] zynqmp_clock_probe+0x3cc/0x4c0 [<000000005f5986f0>] platform_drv_probe+0x58/0xa8 [<00000000d5810136>] really_probe+0xd8/0x2a8 [<00000000f5b671be>] driver_probe_device+0x5c/0x100 [<0000000038f91fcf>] __device_attach_driver+0x98/0xb8 [<000000008a3f2ac2>] bus_for_each_drv+0x74/0xd8 [<000000001cb2783d>] __device_attach+0xe0/0x140 [<00000000c268031b>] device_initial_probe+0x24/0x30 [<000000006998de4b>] bus_probe_device+0x9c/0xa8 [<00000000647ae6ff>] device_add+0x3c0/0x610 [<0000000071c14bb8>] of_device_add+0x40/0x50 [<000000004bb5d132>] of_platform_device_create_pdata+0xbc/0x138 This is because that when num_nodes is larger than 1, clk_out is allocated using kasprintf for these nodes but only the last node's clk_out is freed. Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lkml.kernel.org/r/1583185843-20707-5-git-send-email-jolly.shah@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: zynqmp: Fix invalid clock name queriesRajan Vaja
The clock driver makes EEMI call to get the name of invalid clk when executing versal_get_clock_info() function. This results in error messages. Added check for validating clock before saving clock attribute and calling zynqmp_pm_clock_get_name() in versal_get_clock_info() function. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lkml.kernel.org/r/1583185843-20707-4-git-send-email-jolly.shah@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: zynqmp: Fix divider2 calculationTejas Patel
zynqmp_get_divider2_val() calculates, divider value of type DIV2 clock, considering best possible combination of DIV1 and DIV2. To find best possible values of DIV1 and DIV2, DIV1's parent rate should be consider and not DIV2's parent rate since it would rate of div1 clock. Consider a below topology, out_clk->div2_clk->div1_clk->fixed_parent where out_clk = (fixed_parent/div1_clk) / div2_clk, so parent clock of div1_clk (i.e. out_clk) should be divided by div1_clk and div2_clk. Existing code divides parent rate of div2_clk's clock instead of div1_clk's parent rate, which is wrong. Fix the same by considering div1's parent clock rate. Fixes: 4ebd92d2e228 ("clk: zynqmp: Fix divider calculation") Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lkml.kernel.org/r/1583185843-20707-3-git-send-email-jolly.shah@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: zynqmp: Limit bestdiv with maxdivRajan Vaja
Clock divider value should not be greater than maximum divider value. So use minimum of best divider or maximum divider value. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lkml.kernel.org/r/1583185843-20707-2-git-send-email-jolly.shah@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-04-28firmware: xilinx: Use APIs instead of IOCTLsRajan Vaja
Remove IOCTL API and use individual APIs for better readability. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-12-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock set/get parentRajan Vaja
Use direct function call instead of eemi ops for clock set/get parent. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-11-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock_getdividerRajan Vaja
Use direct function call instead of using eemi ops for clock_getdivider. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-9-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock_setdividerRajan Vaja
Use direct function call instead of using eemi ops for clock_setdivider. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-8-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock_getstateRajan Vaja
Use direct function call instead of eemi ops for clock_getstate. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-7-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock_disableRajan Vaja
Use direct function call for clock_disable instead using of eemi ops. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-6-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for clock_enableRajan Vaja
Use direct function call for clock_enable instead of eemi ops. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-5-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28firmware: xilinx: Remove eemi ops for query_dataRajan Vaja
Use direct function call for query_data instead of using eemi ops. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Link: https://lore.kernel.org/r/1587761887-4279-4-git-send-email-jolly.shah@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flagTejas Patel
Existing clock divider functions is not checking for base of divider. So, if any clock divider is power of 2 then clock rate calculation will be wrong. Add support to calculate divider value for the clocks with CLK_DIVIDER_POWER_OF_TWO flag. Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-7-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-23clk: zynqmp: Fix divider calculationRajan Vaja
zynqmp_clk_divider_round_rate() returns actual divider value after calculating from parent rate and desired rate, even though that rate is not supported by single divider of hardware. It is also possible that such divisor value can be achieved through 2 different dividers. As, Linux tries to set such divisor value(out of range) in single divider set divider is getting failed. Fix the same by computing best possible combination of two divisors which provides more accurate clock rate. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-6-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-23clk: zynqmp: Add support for get max dividerRajan Vaja
To achieve best possible rate, maximum limit of divider is required while computation. Get maximum supported divisor from firmware. To maintain backward compatibility assign maximum possible value(0xFFFF) if query for max divisor is not successful. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-5-git-send-email-rajan.vaja@xilinx.com Acked-by: Michal Simek <michal.simek@xilinx.com> [sboyd@kernel.org: Remove else return and just return] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-23clk: zynqmp: Warn user if clock user are more than allowedRajan Vaja
Warn user if clock is used by more than allowed devices. This check is done by firmware and returns respective error code. Upon receiving error code for excessive user, warn user for the same. This change is done to restrict VPLL use count. It is assumed that VPLL is used by one user only. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-4-git-send-email-rajan.vaja@xilinx.com Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-23clk: zynqmp: Extend driver for versalRajan Vaja
Add Versal compatible string to support Versal binding. Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-3-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: Among the larger pieces: - Power management improvements for TI am335x and am437x (RTC suspend/wake) - Misc new additions for Amlogic (socinfo updates) - ZynqMP FPGA manager - Nvidia improvements for reset/powergate handling - PMIC wrapper for Mediatek MT8516 - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) soc: aspeed: fix Kconfig soc: add aspeed folder and misc drivers spi: zynqmp: Fix build break soc: imx: Add generic i.MX8 SoC driver MAINTAINERS: Update email for Qualcomm SoC maintainer memory: tegra: Fix a typos for "fdcdwr2" mc client Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+" memory: tegra: Replace readl-writel with mc_readl-mc_writel memory: tegra: Fix integer overflow on tick value calculation memory: tegra: Fix missed registers values latching ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30 optee: allow to work without static shared memory soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask fpga manager: Adding FPGA Manager support for Xilinx zynqmp dt-bindings: fpga: Add bindings for ZynqMP fpga driver firmware: xilinx: Add fpga API's ...
2019-04-19clk: zynqmp: use structs for clk query responsesMichael Tretter
The driver retrieves the clock tree by querying the ATF for the clock names, the clock topology, the parents and other attributes. The driver needs to unmarshal the responses. The definition of the fields in the firmware responses to the queries is inconsistent. Some are specified as a mask, some as a shift, and by the length of the previous field. Define C structs for the entire firmware responses to avoid passing pointers to arrays of an implicit size and make the format of the responses to the queries obvious. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Reviewed-by: Jolly Shah <jolly.shah@xilinx.com> [sboyd@kernel.org: Drop 0 initializers because sparse complains] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11clk: zynqmp: fix check for fractional clockMichael Tretter
The firmware sets BIT(13) in clkflag to mark a divider as fractional divider. The clock driver copies the clkflag straight to the flags of the common clock framework. In the common clk framework flags, BIT(13) is defined as CLK_DUTY_CYCLE_PARENT. Add a new field to the zynqmp_clk_divider to specify if a divider is a fractional devider. Set this field based on the clkflag when registering a divider. At the same time, unset BIT(13) from clkflag when copying the flags to the common clk framework flags. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11clk: zynqmp: do not export zynqmp_clk_register_* functionsMichael Tretter
The zynqmp_clk_register_* functions are internal functions of the driver. Only clkc.c uses these functions to register these clocks. Therefore, there is no need to export these functions. The gate and pll already don't export their register_* functions. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11clk: zynqmp: fix kerneldoc of __zynqmp_clock_get_parentsMichael Tretter
The kerneldoc refers to __zynqmp_clock_get_topology(), but actually documents __zynqmp_clock_get_parents(). Refer to the correct function name in the kerneldoc. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11drivers: clk: Update clock driver to handle clock attributeRajan Vaja
Versal EEMI APIs uses clock device ID which is combination of class, subclass, type and clock index (e.g. 0x8104006 in which 0-13 bits are for index(6 in given example), 14-19 bits are for clock type (i.e pll, out or ref, 1 in given example), 20-25 bits are for subclass which is nothing but clock type only), 26-32 bits are for device class, which is clock(0x2) for all clocks) while zynqmp firmware uses clock ID which is index only (e.g 0, 1, to n, where n is max_clock id). To use zynqmp clock driver for versal platform also, extend use of QueryAttribute API to fetch device class, subclass and clock type to create clock device ID. In case of zynqmp this attributes would be 0 only, so there won't be any effect on clock id as it would use clock index only. Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11drivers: clk: zynqmp: Allow zero divisor valueRajan Vaja
Zero divider is valid and default for some of ZynqMP clocks. Allow zero divisor when CLK_DIVIDER_ALLOW_ZERO for the clock is set. Signed-off-by: Rajan Vaja <rajanv@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-18drivers: Defer probe if firmware is not readyRajan Vaja
Driver needs ZynqMP firmware interface to call EEMI APIs. In case firmware is not ready, dependent drivers should wait until the firmware is ready. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-09clk: zynqmp: Fix memory allocation in zynqmp_clk_setupGustavo A. R. Silva
Fix memory allocation and use struct_size() in kzalloc(). This also fixes the allocation size to be correct, and smaller, because before we were allocating a bunch of sizeof(struct clk_hw_onecell_data) structures for each struct clk_hw we needed. Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Michal Simek <michal.simek@xilinx.com> [sboyd@kernel.org: Expand commit text] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-03clk: zynqmp: Off by one in zynqmp_is_valid_clock()Dan Carpenter
The > comparison should be >= to prevent reading beyond the end of the clock[] array. (The clock[] array is allocated in zynqmp_clk_setup() and has clock_max_idx elements.) Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-14clk: zynqmp: handle fixed factor param query errorRajan Vaja
Return proper error code in case query for fixed factor parameter fails. This also fixes build warning for set but not used variable 'ret'. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-09drivers: clk: Add ZynqMP clock driverJolly Shah
This patch adds CCF compliant clock driver for ZynqMP. Clock driver queries supported clock information from firmware and regiters pll and output clocks with CCF. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Tejas Patel <tejasp@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Acked-by: Olof Johansson <olof@lixom.net> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>