summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2018-11-09clk: qcom: gcc: Fix board clock node nameVinod Koul
Device tree node name are not supposed to have "_" in them so fix the node name use of xo_board to xo-board Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404") Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-08clk: meson: axg: mark fdiv2 and fdiv3 as criticalJerome Brunet
Similar to gxbb and gxl platforms, axg SCPI Cortex-M co-processor uses the fdiv2 and fdiv3 to, among other things, provide the cpu clock. Until clock hand-off mechanism makes its way to CCF and the generic SCPI claims platform specific clocks, these clocks must be marked as critical to make sure they are never disabled when needed by the co-processor. Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-08clk: meson-gxbb: set fclk_div3 as CLK_IS_CRITICALChristian Hewitt
On the Khadas VIM2 (GXM) and LePotato (GXL) board there are problems with reboot; e.g. a ~60 second delay between issuing reboot and the board power cycling (and in some OS configurations reboot will fail and require manual power cycling). Similar to 'commit c987ac6f1f088663b6dad39281071aeb31d450a8 ("clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL")' the SCPI Cortex-M4 Co-Processor seems to depend on FCLK_DIV3 being operational. Until commit 05f814402d6174369b3b29832cbb5eb5ed287059 ("clk: meson: add fdiv clock gates"), this clock was modeled and left on by the bootloader. We don't have precise documentation about the SCPI Co-Processor and its clock requirement so we are learning things the hard way. Marking this clock as critical solves the problem but it should not be viewed as final solution. Ideally, the SCPI driver should claim these clocks. We also depends on some clock hand-off mechanism making its way to CCF, to make sure the clock stays on between its registration and the SCPI driver probe. Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-06clk: fixed-factor: fix of_node_get-put imbalanceRicardo Ribalda Delgado
When the fixed factor clock is created by devicetree, of_clk_add_provider is called. Add a call to of_clk_del_provider in the remove function to balance it out. Reported-by: Alan Tull <atull@kernel.org> Fixes: 971451b3b15d ("clk: fixed-factor: Convert into a module platform driver") Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-31Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time it looks like a quieter release cycle in the clk tree. I guess that's because of summer time holidays/vacations. The biggest change in the diffstat is in the Qualcomm clk driver, where they got support for CPUs and handful of SoCs. After that, the at91 driver got a major rewrite for newer DT bindings that should make things easier going forward and the TI code moved to a clockdomain based design. The long tail is mostly small driver updates for newer clks and some simpler SoC clock drivers such as the Hisilicon and imx support. In the core framework, we only have two small changes this time. One is a new clk API to get all clks for a device with the bulk clk APIs. This allows drivers that don't care about doing anything besides turning on all the clks to just clk_get() them all and turn them on. The other change is the beginning of a way to support save and restore of clk settings in the clk framework. TI is the only user right now, but we will want to expand upon this design in the future to support more save and restore of clk registers. At least this gets us started and works well enough for one SoC, but there's more work in the future. Core: - clk_bulk_get_all() API and friends to get all the clks for a device - Basic clk state save/restore hooks New Drivers: - Renesas RZ/A2 (R7S9210) SoC, including early clocks - Rensas RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs - Rensas RZ/G2M (r8a774a1) SoC - Qualcomm Krait CPU clk support - Qualcomm QCS404 GCC support - Qualcomm SDM660 GCC support - Qualcomm SDM845 camera clock controller - Ingenic jz4725b CGU - Hisilicon 3670 SoC support - TI SCI clks on K3 SoCs - iMX6 MMDC clks - Reset Controller (RMU) support for Actions Semi Owl S900 and S700 SoCs Updates: - Rework at91 PMC clock driver for new DT bindings - Nvidia Tegra clk driver MBIST workaround fix - S2RAM support for Marvell mvebu periph clks - Use updated printk format for OF node names - Fix TI code to only search DT subnodes - Various static analysis finds - Tag various drivers with SPDX license tags - Support dynamic frequency switching (DFS) on qcom SDM845 GCC - Only use s2mps11 dt-binding defines instead of redefining them in the driver - Add some more missing clks to qcom MSM8996 GCC - Quad SPI clks on qcom SDM845 - Add support for CMT timer clocks on R-Car V3H - Add support for SHDI and various timer clocks on R-Car V3M - Improve OSC and RCLK (watchdog) handling on R-Car Gen3 SoCs - Amlogic clk-pll driver improvements and updates - Amlogic axg audio controller system clocks - Register Amlogic meson8b clock controller early - Add support for SATA and Fine Display Processor (FDP) clocks on R-Car M3-N - Consolidation of system suspend related code in Exynos, S5P, S3C SoC clk drivers - Fixes for system suspend support on Exynos542x (Odroid boards) and Exynos5433 SoC - Remove obsoleted Exynos4212 ISP clock definitions - Migrated TI am3/4/5 and dra7 SoCs to clockdomain based design - TI RTC+DDR sleep mode support for clock save/restore - Allwinner A64 display engine support and fixes - Allwinner A83t display engine support and fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (186 commits) clk: qcom: Remove unused arrays in SDM845 GCC clk: fixed-rate: fix of_node_get-put imbalance clk: s2mps11: Add used attribute to s2mps11_dt_match clk: qcom: gcc-sdm660: Add MODULE_LICENSE clk: qcom: Add safe switch hook for krait mux clocks dt-bindings: clock: Document qcom,krait-cc clk: qcom: Add Krait clock controller driver dt-bindings: arm: Document qcom,kpss-gcc clk: qcom: Add KPSS ACC/GCC driver clk: qcom: Add support for Krait clocks clk: qcom: Add IPQ806X's HFPLLs clk: qcom: Add MSM8960/APQ8064's HFPLLs dt-bindings: clock: Document qcom,hfpll clk: qcom: Add HFPLL driver clk: qcom: Add support for High-Frequency PLLs (HFPLLs) ARM: Add Krait L2 register accessor functions clk: imx6q: add mmdc0 ipg clock clk: imx6sl: add mmdc ipg clocks clk: imx6sll: add mmdc1 ipg clock clk: imx6sx: add mmdc1 ipg clock ...
2018-10-31memblock: stop using implicit alignment to SMP_CACHE_BYTESMike Rapoport
When a memblock allocation APIs are called with align = 0, the alignment is implicitly set to SMP_CACHE_BYTES. Implicit alignment is done deep in the memblock allocator and it can come as a surprise. Not that such an alignment would be wrong even when used incorrectly but it is better to be explicit for the sake of clarity and the prinicple of the least surprise. Replace all such uses of memblock APIs with the 'align' parameter explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment in the memblock internal allocation functions. For the case when memblock APIs are used via helper functions, e.g. like iommu_arena_new_node() in Alpha, the helper functions were detected with Coccinelle's help and then manually examined and updated where appropriate. The direct memblock APIs users were updated using the semantic patch below: @@ expression size, min_addr, max_addr, nid; @@ ( | - memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc(size, 0) + memblock_alloc(size, SMP_CACHE_BYTES) | - memblock_alloc_raw(size, 0) + memblock_alloc_raw(size, SMP_CACHE_BYTES) | - memblock_alloc_from(size, 0, min_addr) + memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_nopanic(size, 0) + memblock_alloc_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_low(size, 0) + memblock_alloc_low(size, SMP_CACHE_BYTES) | - memblock_alloc_low_nopanic(size, 0) + memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_from_nopanic(size, 0, min_addr) + memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_node(size, 0, nid) + memblock_alloc_node(size, SMP_CACHE_BYTES, nid) ) [mhocko@suse.com: changelog update] [akpm@linux-foundation.org: coding-style fixes] [rppt@linux.ibm.com: fix missed uses of implicit alignment] Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: remove _virt from APIs returning virtual addressMike Rapoport
The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-29Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "The most noteworthy SoC driver changes this time include: - The TEE subsystem gains an in-kernel interface to access the TEE from device drivers. - The reset controller subsystem gains a driver for the Qualcomm Snapdragon 845 Power Domain Controller. - The Xilinx Zynq platform now has a firmware interface for its platform management unit. This contains a firmware "ioctl" interface that was a little controversial at first, but the version we merged solved that by not exposing arbitrary firmware calls to user space. - The Amlogic Meson platform gains a "canvas" driver that is used for video processing and shared between different high-level drivers. The rest is more of the usual, mostly related to SoC specific power management support and core drivers in drivers/soc: - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new features related to power and reset control. - The Mediatek mt8183 and mt6765 SoC platforms gain support for their respective power management chips. - A new driver for NXP i.MX8, which need a firmware interface for power management. - The SCPI firmware interface now contains support estimating power usage of performance states - The NVIDIA Tegra "pmc" driver gains a few new features, in particular a pinctrl interface for configuring the pads. - Lots of small changes for Qualcomm, in particular the "smem" device driver. - Some cleanups for the TI OMAP series related to their sysc controller. Additional cleanups and bugfixes in SoC specific drivers include the Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits) firmware: tegra: bpmp: Implement suspend/resume support drivers: clk: Add ZynqMP clock driver dt-bindings: clock: Add bindings for ZynqMP clock driver firmware: xilinx: Add zynqmp IOCTL API for device control Documentation: xilinx: Add documentation for eemi APIs MAINTAINERS: imx: include drivers/firmware/imx path firmware: imx: add misc svc support firmware: imx: add SCU firmware driver support reset: Fix potential use-after-free in __of_reset_control_get() dt-bindings: arm: fsl: add scu binding doc soc: fsl: qbman: add interrupt coalesce changing APIs soc: fsl: bman_portals: defer probe after bman's probe soc: fsl: qbman: Use last response to determine valid bit soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers soc: fsl: qbman: Check if CPU is offline when initializing portals reset: qcom: PDC Global (Power Domain Controller) reset controller dt-bindings: reset: Add PDC Global binding for SDM845 SoCs reset: Grammar s/more then once/more than once/ bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS ...
2018-10-26Merge tag 'devicetree-for-4.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: "A bit bigger than normal as I've been busy this cycle. There's a few things with dependencies and a few things subsystem maintainers didn't pick up, so I'm taking them thru my tree. The fixes from Johan didn't get into linux-next, but they've been waiting for some time now and they are what's left of what subsystem maintainers didn't pick up. Summary: - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4 - Work to get rid of direct accesses to struct device_node name and type pointers in preparation for removing them. New helpers for parsing DT cpu nodes and conversions to use the helpers. printk conversions to %pOFn for printing DT node names. Most went thru subystem trees, so this is the remainder. - Fixes to DT child node lookups to actually be restricted to child nodes instead of treewide. - Refactoring of dtb targets out of arch code. This makes the support more uniform and enables building all dtbs on c6x, microblaze, and powerpc. - Various DT binding updates for Renesas r8a7744 SoC - Vendor prefixes for Facebook, OLPC - Restructuring of some ARM binding docs moving some peripheral bindings out of board/SoC binding files - New "secure-chosen" binding for secure world settings on ARM - Dual licensing of 2 DT IRQ binding headers" * tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits) ARM: dt: relicense two DT binding IRQ headers power: supply: twl4030-charger: fix OF sibling-node lookup NFC: nfcmrvl_uart: fix OF child-node lookup net: stmmac: dwmac-sun8i: fix OF child-node lookup net: bcmgenet: fix OF child-node lookup drm/msm: fix OF child-node lookup drm/mediatek: fix OF sibling-node lookup of: Add missing exports of node name compare functions dt-bindings: Add OLPC vendor prefix dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus dt-bindings: thermal: samsung: Add SPDX license identifier dt-bindings: clock: samsung: Add SPDX license identifiers dt-bindings: timer: ostm: Add R7S9210 support dt-bindings: phy: rcar-gen2: Add r8a7744 support dt-bindings: can: rcar_can: Add r8a7744 support dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support dt-bindings: watchdog: renesas-wdt: Document r8a7744 support dt-bindings: thermal: rcar: Add device tree support for r8a7744 Documentation: dt: Add binding for /secure-chosen/stdout-path dt-bindings: arm: zte: Move sysctrl bindings to their own doc ...
2018-10-18Merge branches 'clk-fixed-rate-remove' and 'clk-qcom-cleanup' into clk-nextStephen Boyd
* clk-fixed-rate-remove: clk: fixed-rate: fix of_node_get-put imbalance * clk-qcom-cleanup: clk: qcom: Remove unused arrays in SDM845 GCC
2018-10-18Merge branches 'clk-imx6-mmdc', 'clk-qcom-krait', 'clk-rockchip' and ↵Stephen Boyd
'clk-smp2s11-match' into clk-next - iMX6 MMDC clks - Qualcomm Krait CPU clk support * clk-imx6-mmdc: clk: imx6q: add mmdc0 ipg clock clk: imx6sl: add mmdc ipg clocks clk: imx6sll: add mmdc1 ipg clock clk: imx6sx: add mmdc1 ipg clock clk: imx6ul: add mmdc1 ipg clock * clk-qcom-krait: clk: qcom: Add safe switch hook for krait mux clocks dt-bindings: clock: Document qcom,krait-cc clk: qcom: Add Krait clock controller driver dt-bindings: arm: Document qcom,kpss-gcc clk: qcom: Add KPSS ACC/GCC driver clk: qcom: Add support for Krait clocks clk: qcom: Add IPQ806X's HFPLLs clk: qcom: Add MSM8960/APQ8064's HFPLLs dt-bindings: clock: Document qcom,hfpll clk: qcom: Add HFPLL driver clk: qcom: Add support for High-Frequency PLLs (HFPLLs) ARM: Add Krait L2 register accessor functions * clk-rockchip: clk: rockchip: Fix static checker warning in rockchip_ddrclk_get_parent call clk: rockchip: use the newly added clock-id for hdmi on RK3066 clk: rockchip: add clock-id for HCLK_HDMI on rk3066 clk: rockchip: fix wrong mmc sample phase shift for rk3328 clk: rockchip: improve rk3288 pll rates for better hdmi output * clk-smp2s11-match: clk: s2mps11: Add used attribute to s2mps11_dt_match clk: s2mps11: Fix matching when built as module and DT node contains compatible
2018-10-18Merge branches 'clk-actions-reset', 'clk-imx7-init-critical', 'clk-mmp2-ids' ↵Stephen Boyd
and 'clk-at91-pmc-rework' into clk-next - Reset Controller (RMU) support for Actions Semi Owl S900 and S700 SoCs - Rework at91 PMC clock driver for new DT bindings * clk-actions-reset: clk: actions: Add Actions Semi S900 SoC Reset Management Unit support clk: actions: Add Actions Semi S700 SoC Reset Management Unit support clk: actions: Add Actions Semi Owl SoCs Reset Management Unit support dt-bindings: reset: Add binding constants for Actions Semi S900 RMU dt-bindings: reset: Add binding constants for Actions Semi S700 RMU dt-bindings: clock: Add reset controller bindings for Actions Semi Owl SoCs clk: actions: Cache regmap info in private clock descriptor * clk-imx7-init-critical: clk: imx7d: remove CLK_IS_CRITICAL flag for arm_a7_root_clk clk: imx: cpu clock should be always critical clk: imx: imx7d: remove clks_init_on array clk: imx: imx7d: remove unnecessary clocks from clks_init_on array * clk-mmp2-ids: clk: mmp2: fix the clock id for sdh2_clk and sdh3_clk * clk-at91-pmc-rework: clk: at91: move DT compatibility code to its own file clk: at91: add at91sam9rl PMC driver clk: at91: add at91sam9x5 PMCs driver clk: at91: add at91sam9260 PMC driver clk: at91: add sama5d2 PMC driver clk: at91: add sama5d4 pmc driver clk: at91: add new DT lookup function dt-bindings: clk: at91: Document new PMC binding clk: at91: add pmc_data struct and helpers clk: at91: allow clock registration from C code clk: at91: generated: set audio_pll_allowed in at91_clk_register_generated() clk: at91: audio-pll: separate registration from DT parsing clk: at91: h32mx: separate registration from DT parsing clk: at91: generated: SSCs don't have a gclk clk: at91: audio-pll: fix audio pmc type
2018-10-18Merge branches 'clk-tegra' and 'clk-bulk-get-all' into clk-nextStephen Boyd
- Nvidia Tegra clk driver MBIST workaround fix - clk_bulk_get_all() API and friends to get all the clks for a device * clk-tegra: clk: tegra210: Include size.h for compilation ease clk: tegra: Fixes for MBIST work around clk: tegra: probe deferral error reporting * clk-bulk-get-all: clk: add managed version of clk_bulk_get_all clk: add new APIs to operate on all available clocks clk: bulk: add of_clk_bulk_get()
2018-10-18Merge branch 'clk-ingenic-jz4725b' into clk-nextStephen Boyd
- Ingenic jz4725b CGU * clk-ingenic-jz4725b: clk: Add Ingenic jz4725b CGU driver dt-bindings: clock: Add jz4725b-cgu.h header dt-bindings: clock: ingenic: Explicitly list compatible strings clk: ingenic: Add proper Kconfig entries
2018-10-18Merge branch 'clk-qcom-qcs404' into clk-nextStephen Boyd
- Qualcomm QCS404 GCC support * clk-qcom-qcs404: clk: qcom: gcc: Add global clock controller driver for QCS404 clk: qcom: Export clk_alpha_pll_configure()
2018-10-18Merge branch 'clk-qcom-sdm660' into clk-nextStephen Boyd
- Qualcomm SDM660 GCC support * clk-qcom-sdm660: clk: qcom: gcc-sdm660: Add MODULE_LICENSE clk: qcom: Add Global Clock controller (GCC) driver for SDM660
2018-10-18Merge branches 'clk-samsung', 'clk-hisi3670' and 'clk-at91-div-0' into clk-nextStephen Boyd
- Hisilicon 3670 SoC support * clk-samsung: dt-bindings: clock: samsung: Add SPDX license identifiers clk: samsung: Use clk_hw API for calling clk framework from clk notifiers clk: samsung: exynos5420: Enable PERIS clocks for suspend clk: samsung: exynos5420: Define CLK_SECKEY gate clock only or Exynos5420 clk: samsung: exynos5433: Keep sclk_uart clocks enabled in suspend clk: samsung: Remove obsolete code for Exynos4412 ISP clocks clk: samsung: exynos5433: Add suspend state for TOP, CPIF & PERIC CMUs clk: samsung: Use NOIRQ stage for Exynos5433 clocks suspend/resume clk: samsung: exynos5420: Use generic helper for handling suspend/resume clk: samsung: exynos4: Use generic helper for handling suspend/resume clk: samsung: Add support for setting registers state before suspend clk: samsung: exynos5250: Use generic helper for handling suspend/resume clk: samsung: s5pv210: Use generic helper for handling suspend/resume clk: samsung: s3c64xx: Use generic helper for handling suspend/resume clk: samsung: s3c2443: Use generic helper for handling suspend/resume clk: samsung: s3c2412: Use generic helper for handling suspend/resume clk: samsung: s3c2410: Use generic helper for handling suspend/resume clk: samsung: Remove excessive include * clk-hisi3670: clk: hisilicon: Add clock driver for Hi3670 SoC dt-bindings: clk: hisilicon: Add bindings for Hi3670 clk * clk-at91-div-0: clk: at91: Fix division by zero in PLL recalc_rate()
2018-10-18Merge branch 'clk-ti' into clk-nextStephen Boyd
* clk-ti: clk: ti: Prepare for remove of OF node name clk: Clean up suspend/resume coding style clk: ti: Add functions to save/restore clk context clk: clk: Add clk_gate_restore_context function clk: Add functions to save/restore clock context en-masse clk: ti: dra7: add new clkctrl data clk: ti: dra7xx: rename existing clkctrl data as compat data clk: ti: am43xx: add new clkctrl data for am43xx clk: ti: am43xx: rename existing clkctrl data as compat data clk: ti: am33xx: add new clkctrl data for am33xx clk: ti: am33xx: rename existing clkctrl data as compat data clk: ti: clkctrl: replace dashes from clkdm name with underscore clk: ti: clkctrl: support multiple clkctrl nodes under a cm node dt-bindings: clock: dra7xx: add clkctrl indices for new data layout dt-bindings: clock: am43xx: add clkctrl indices for new data layout dt-bindings: clock: am33xx: add clkctrl indices for new data layout
2018-10-18Merge branch 'clk-k3-tisci' into clk-nextStephen Boyd
- TI SCI clks on K3 SoCs * clk-k3-tisci: clk: keystone: add missing MODULE_LICENSE clk: keystone: Enable TISCI clocks if K3_ARCH
2018-10-18Merge branches 'clk-mvebu-periph-pm', 'clk-meson', 'clk-allwinner', ↵Stephen Boyd
'clk-mvebu-dup' and 'clk-davinci' into clk-next - S2RAM support for Marvell mvebu periph clks * clk-mvebu-periph-pm: clk: mvebu: armada-37xx-periph: add suspend/resume support clk: mvebu: armada-37xx-periph: save the IP base address in the driver data * clk-meson: clk: meson: meson8b: use the regmap in the internal reset controller clk: meson: meson8b: register the clock controller early clk: meson-axg: pcie: drop the mpll3 clock parent clk: meson: axg: round audio system master clocks down clk: meson: clk-pll: drop hard-coded rates from pll tables clk: meson: clk-pll: remove od parameters clk: meson: clk-pll: drop CLK_GET_RATE_NOCACHE where unnecessary clk: meson: clk-pll: add enable bit * clk-allwinner: dt-bindings: clock: sun50i-a64-ccu: Add PLL_VIDEO0 macro clk: sunxi-ng: a64: Add max. rate constraint to video PLLs clk: sunxi-ng: a64: Add minimal rate for video PLLs clk: sunxi-ng: sun50i: h6: Add 2x fixed post-divider to MMC module clocks clk: sunxi-ng: a83t: Add max. rate constraint to video PLLs clk: sunxi-ng: nkmp: Add constraint for maximum rate clk: sunxi-ng: r40: Add max. rate constraint to video PLLs clk: sunxi-ng: h3/h5: Add max. rate constraint to pll-video clk: sunxi-ng: Add maximum rate constraint to NM PLLs clk: sunxi-ng: h6: fix PWM gate/reset offset clk: sunxi-ng: h6: fix bus clocks' divider position * clk-mvebu-dup: clk: mvebu: ap806: Remove superfluous of_clk_add_provider * clk-davinci: clk: davinci: kill davinci_clk_reset_assert/deassert()
2018-10-18Merge branches 'clk-qcom-sdm845-camcc' and 'clk-mtk-unused' into clk-nextStephen Boyd
- Qualcomm SDM845 camera clock controller * clk-qcom-sdm845-camcc: clk: qcom: Add camera clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM Camera clock bindings * clk-mtk-unused: clk: mediatek: remove unused array audio_parents
2018-10-18Merge branch 'clk-renesas' into clk-nextStephen Boyd
* clk-renesas: (36 commits) clk: renesas: r7s9210: Add SPI clocks clk: renesas: r7s9210: Move table update to separate function clk: renesas: r7s9210: Convert some clocks to early clk: renesas: cpg-mssr: Add early clock support clk: renesas: r8a77970: Add TPU clock clk: renesas: r8a77990: Fix incorrect PLL0 divider in comment dt-bindings: clock: renesas: cpg-mssr: Document r8a774c0 clk: renesas: cpg-mssr: Add r8a774c0 support clk: renesas: Add r8a774c0 CPG Core Clock Definitions clk: renesas: r8a7743: Add r8a7744 support clk: renesas: Add r8a7744 CPG Core Clock Definitions dt-bindings: clock: renesas: cpg-mssr: Document r8a7744 binding dt-bindings: clock: renesas: Convert to SPDX identifiers clk: renesas: cpg-mssr: Add R7S9210 support clk: renesas: r8a77970: Add TMU clocks clk: renesas: r8a77970: Add CMT clocks clk: renesas: r9a06g032: Fix UART34567 clock rate clk: renesas: r8a77970: Add SD0H/SD0 clocks for SDHI clk: renesas: r8a77980: Add CMT clocks clk: renesas: r8a77990: Add missing I2C7 clock ...
2018-10-18Merge branches 'clk-dt-name', 'clk-ti-of-node' and 'clk-sa' into clk-nextStephen Boyd
- Use updated printk format for OF node names - Fix TI code to only search DT subnodes - Various static analysis finds * clk-dt-name: clk: Convert to using %pOFn instead of device_node.name * clk-ti-of-node: clk: ti: fix OF child-node lookup * clk-sa: clk: mvebu: armada-37xx-tbg: Switch to clk_get and balance it in probe reset: hisilicon: fix potential NULL pointer dereference clk: cdce925: release child device nodes clk: qcom: clk-branch: Use true and false for boolean values
2018-10-18Merge branches 'clk-spdx', 'clk-qcom-dfs', 'clk-smp2s11-include', ↵Stephen Boyd
'clk-qcom-8996-missing' and 'clk-qcom-qspi' into clk-next - Tag various drivers with SPDX license tags - Support dynamic frequency switching (DFS) on qcom SDM845 GCC - Only use s2mps11 dt-binding defines instead of redefining them in the driver - Add some more missing clks to qcom MSM8996 GCC - Quad SPI clks on qcom SDM845 * clk-spdx: clk: mvebu: use SPDX-License-Identifier clk: renesas: Convert to SPDX identifiers clk: renesas: use SPDX identifier for Renesas drivers clk: s2mps11,s3c64xx: Add SPDX license identifiers clk: max77686: Add SPDX license identifiers * clk-qcom-dfs: clk: qcom: Allocate space for NULL terimation in DFS table clk: qcom: gcc: Register QUPv3 RCGs for DFS on SDM845 clk: qcom: Add support for RCG to register for DFS * clk-smp2s11-include: clk: s2mps11: Use existing defines from bindings for clock IDs * clk-qcom-8996-missing: clk: qcom: Add some missing gcc clks for msm8996 * clk-qcom-qspi: clk: qcom: Add qspi (Quad SPI) clocks for sdm845 clk: qcom: Add qspi (Quad SPI) clock defines for sdm845 to header
2018-10-18clk: qcom: Remove unused arrays in SDM845 GCCEvan Green
This change removes a parent map and parent name array that appear to be completely unreferenced. Signed-off-by: Evan Green <evgreen@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-18clk: fixed-rate: fix of_node_get-put imbalanceAlan Tull
When the fixed rate clock is created by devicetree, of_clk_add_provider is called. Add a call to of_clk_del_provider in the remove function to balance it out. Signed-off-by: Alan Tull <atull@kernel.org> Fixes: 435779fe1336 ("clk: fixed-rate: Convert into a module platform driver") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-18clk: s2mps11: Add used attribute to s2mps11_dt_matchNathan Chancellor
Clang warns after commit 8985167ecf57 ("clk: s2mps11: Fix matching when built as module and DT node contains compatible"): drivers/clk/clk-s2mps11.c:242:34: warning: variable 's2mps11_dt_match' is not needed and will not be emitted [-Wunneeded-internal-declaration] static const struct of_device_id s2mps11_dt_match[] = { ^ 1 warning generated. This warning happens when a variable is used in some construct that doesn't require a reference to that variable to be emitted in the symbol table; in this case, it's MODULE_DEVICE_TABLE, which only needs to hold the data of the variable, not the variable itself. $ nm -S drivers/clk/clk-s2mps11.o | rg s2mps11_dt_match 00000078 000003d4 R __mod_of__s2mps11_dt_match_device_table Normally, with device ID table variables, it means that the variable just needs to be tied to the device declaration at the bottom of the file, like s2mps11_clk_id: $ nm -S drivers/clk/clk-s2mps11.o | rg s2mps11_clk_id 00000000 00000078 R __mod_platform__s2mps11_clk_id_device_table 00000000 00000078 r s2mps11_clk_id However, because the comment above this deliberately doesn't want this variable added to .of_match_table, we need to mark s2mps11_dt_match as __used to silence this warning. This makes it clear to Clang that the variable is used for something, even if a reference to it isn't being emitted. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Fixes: 8985167ecf57 ("clk: s2mps11: Fix matching when built as module and DT node contains compatible") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-18clk: qcom: gcc-sdm660: Add MODULE_LICENSEStephen Boyd
Add a module license to match the license at the top of this file and silence a build warning. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: qcom: Add safe switch hook for krait mux clocksSricharan R
When the Hfplls are reprogrammed during the rate change, the primary muxes which are sourced from the same hfpll for higher frequencies, needs to be switched to the 'safe secondary mux' as the parent for that small window. This is done by registering a clk notifier for the muxes and switching to the safe parent in the PRE_RATE_CHANGE notifier and back to the original parent in the POST_RATE_CHANGE notifier. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: qcom: Add Krait clock controller driverStephen Boyd
The Krait CPU clocks are made up of a primary mux and secondary mux for each CPU and the L2, controlled via cp15 accessors. For Kraits within KPSSv1 each secondary mux accepts a different aux source, but on KPSSv2 each secondary mux accepts the same aux source. Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: qcom: Add KPSS ACC/GCC driverStephen Boyd
The ACC and GCC regions present in KPSSv1 contain registers to control clocks and power to each Krait CPU and L2. For CPUfreq purposes probe these devices and expose a mux clock that chooses between PXO and PLL8. Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: qcom: Add support for Krait clocksStephen Boyd
The Krait clocks are made up of a series of muxes and a divider that choose between a fixed rate clock and dedicated HFPLLs for each CPU. Instead of using mmio accesses to remux parents, the Krait implementation exposes the remux control via cp15 registers. Support these clocks. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> [sboyd@kernel.org: Move hidden config to top outside of the visible qcom config zone so that menuconfig looks nice] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: qcom: Add IPQ806X's HFPLLsStephen Boyd
Describe the HFPLLs present on IPQ806X devices. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: qcom: Add MSM8960/APQ8064's HFPLLsStephen Boyd
Describe the HFPLLs present on MSM8960 and APQ8064 devices. Acked-by: Rob Herring <robh@kernel.org> (bindings) Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: qcom: Add HFPLL driverStephen Boyd
On some devices (MSM8974 for example), the HFPLLs are instantiated within the Krait processor subsystem as separate register regions. Add a driver for these PLLs so that we can provide HFPLL clocks for use by the system. Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: qcom: Add support for High-Frequency PLLs (HFPLLs)Stephen Boyd
HFPLLs are the main frequency source for Krait CPU clocks. Add support for changing the rate of these PLLs. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: imx6q: add mmdc0 ipg clockAnson Huang
i.MX6Q has MMDC0 ipg clock in CCM CCGR, add it into clock tree for clock management. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: imx6sl: add mmdc ipg clocksAnson Huang
i.MX6SL has MMDC0 and MMDC1 ipg clock in CCM CCGR, add them into clock tree for clock management. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: imx6sll: add mmdc1 ipg clockAnson Huang
i.MX6SLL has MMDC1 ipg clock in CCM CCGR, add it into clock tree for clock management. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: imx6sx: add mmdc1 ipg clockAnson Huang
i.MX6SX has MMDC1 ipg clock in CCM CCGR, add it into clock tree for clock management. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: imx6ul: add mmdc1 ipg clockAnson Huang
i.MX6UL has MMDC1 ipg clock in CCM CCGR, add it into clock tree for clock management. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: move DT compatibility code to its own fileAlexandre Belloni
Move all the DT backward compatibility code to its own file so it can be deleted later. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add at91sam9rl PMC driverAlexandre Belloni
Add a driver for the PMC clocks of the at91sam9rl SoC. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Make i signed to fix signedness bug] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add at91sam9x5 PMCs driverAlexandre Belloni
Add a driver for the PMC clocks of the at91sam9x5 SoCs Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Make i signed to fix signedness bug] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add at91sam9260 PMC driverAlexandre Belloni
Add a driver for the PMC clocks of the at91sam9260, at91sam9261, at91am9263 and at91sam9g20 SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Make i signed to fix signedness bug] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add sama5d2 PMC driverAlexandre Belloni
Add a driver for the PMC clocks of the sama5d2 Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Make i signed to fix signedness bug] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add sama5d4 pmc driverAlexandre Belloni
Add a driver for the PMC clocks of the sama5d4 Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Make i signed to fix signedness bug] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add new DT lookup functionAlexandre Belloni
Add a new DT lookup function to lookup for PMC clocks. Note that the #ifndef AT91_PMC_MOSCS section will be removed once all the platforms are converted. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add pmc_data struct and helpersAlexandre Belloni
Add a new strut to handle references to all the PMC clocks and implement allocation/free helpers. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>