summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2020-10-25treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-22Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This contains no changes to the core framework. It is a collection of various clk driver updates. The biggest driver updates in terms of lines of code is the Allwinner driver, closely followed by the Qualcomm and Mediatek drivers. All of those hit high because we add so many lines of clk data. Coming in fourth place is i.MX which also adds a bunch of clk data. This accounts for the new driver additions this time around. Otherwise the patches are lots of little cleanups and fixes for various clk drivers that have baked in linux-next for a while. I suppose one highlight or theme is that more clk drivers are being updated to work as modules, which is interesting to see such critical SoC infrastructure work as a loadable module. New Drivers: - Support qcom SM8150/SM8250 video and display clks - Support Mediatek MT8167 clks - Add clock for CRC block found on vf610 SoCs - Add support for the Renesas R-Car V3U (R8A779A0) SoC - Add support for the VSP for Resizing clock on Renesas RZ/G1H - Support Allwinner A100 SoC clks Removed Drivers: - Remove i.MX21 clock driver, as i.MX21 platform support is being dropped Updates: - Change how qcom's display port clks work - Small non-critical fixes for TI clk driver - Remove various unused variables in clk drivers - Allow Rockchip clk driver to be a module - Remove most __clk_lookup() calls in Samsung drivers (yay!) - Support building i.MX ARMv8 platforms clock driver as module - Some kerneldoc fixes here and there - A couple of minor i.MX clk data corrections - Update audio clock inverter and fdiv2 flag on Amlogic g12 - Make amlogic clk drivers configurable in Kconfig - Fix Renesas VSP clock names to match corrected hardware documentation - Sigma-delta modulation on Allwinner R40 - Various fixes for at91 clk driver - Use semicolons instead of commas in some places - Mark some variables const so they can move to RO memory" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits) clk: imx8mq: Fix usdhc parents order clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: Restrict CLK_HSDK to ARC_SOC_HSDK clk: at91: sam9x60: support only two programmable clocks clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks clk: bcm2835: add missing release if devm_clk_hw_register fails clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name clk: clk-prima2: fix return value check in prima2_clk_init() clk: mmp2: Fix the display clock divider base clk: pxa: Constify static struct clk_ops clk: baikal-t1: Mark Ethernet PLL as critical clk: qoriq: modify MAX_PLL_DIV to 32 clk: axi-clkgen: Set power bits for fractional mode clk: axi-clkgen: Add support for fractional dividers ...
2020-10-20Merge branches 'clk-ingenic', 'clk-at91', 'clk-kconfig', 'clk-imx', ↵Stephen Boyd
'clk-qcom', 'clk-prima2' and 'clk-bcm' into clk-next - Support qcom SM8150/SM8250 video and display clks - Change how qcom's display port clks work * clk-ingenic: clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks * clk-at91: clk: at91: sam9x60: support only two programmable clocks clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name * clk-kconfig: clk: Restrict CLK_HSDK to ARC_SOC_HSDK * clk-imx: clk: imx8mq: Fix usdhc parents order clk: imx: imx21: Remove clock driver clk: imx: gate2: Fix a few typos clk: imx: Fix and update kerneldoc clk: imx: fix i.MX7D peripheral clk mux flags clk: imx: fix composite peripheral flags clk: imx: Correct the memrepair clock on imx8mp clk: imx: Correct the root clk of media ldb on imx8mp clk: imx: vf610: Add CRC clock clk: imx: Explicitly include bits.h clk: imx8qxp: Support building i.MX8QXP clock driver as module clk: imx8m: Support module build clk: imx: Add clock configuration for ARMv7 platforms clk: imx: Support building i.MX common clock driver as module clk: composite: Export clk_hw_register_composite() clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31 bits * clk-qcom: clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: qcom: Add display clock controller driver for SM8150 and SM8250 dt-bindings: clock: add QCOM SM8150 and SM8250 display clock bindings clk: qcom: add video clock controller driver for SM8250 clk: qcom: add video clock controller driver for SM8150 dt-bindings: clock: add SM8250 QCOM video clock bindings dt-bindings: clock: add SM8150 QCOM video clock bindings dt-bindings: clock: combine qcom,sdm845-videocc and qcom,sc7180-videocc clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs clk/qcom: fix spelling typo clk: qcom: gcc-sdm660: Fix wrong parent_map clk: qcom: dispcc: Update DP clk ops for phy design clk: qcom: gcc-msm8939: remove defined but not used variables clk: qcom: ipq8074: make pcie0_rchng_clk_src static * clk-prima2: clk: clk-prima2: fix return value check in prima2_clk_init() * clk-bcm: clk: bcm2835: add missing release if devm_clk_hw_register fails clk: bcm: rpi: Add register to control pixel bvb clk
2020-10-20Merge branches 'clk-semicolon', 'clk-axi-clkgen', 'clk-qoriq', 'clk-baikal', ↵Stephen Boyd
'clk-const' and 'clk-mmp2' into clk-next * clk-semicolon: clk: meson: use semicolons rather than commas to separate statements clk: mvebu: ap80x-cpu: use semicolons rather than commas to separate statements clk: uniphier: use semicolons rather than commas to separate statements * clk-axi-clkgen: clk: axi-clkgen: Set power bits for fractional mode clk: axi-clkgen: Add support for fractional dividers * clk-qoriq: clk: qoriq: modify MAX_PLL_DIV to 32 * clk-baikal: clk: baikal-t1: Mark Ethernet PLL as critical * clk-const: clk: pxa: Constify static struct clk_ops * clk-mmp2: clk: mmp2: Fix the display clock divider base
2020-10-20Merge branches 'clk-simplify', 'clk-ti', 'clk-tegra', 'clk-rockchip' and ↵Stephen Boyd
'clk-mediatek' into clk-next - Small non-critical fixes for TI clk driver - Support Mediatek MT8167 clks * clk-simplify: clk: mediatek: fix platform_no_drv_owner.cocci warnings clk: mediatek: mt7629: simplify the return expression of mtk_infrasys_init clk: mediatek: mt6797: simplify the return expression of mtk_infrasys_init * clk-ti: clk: ti: dra7: add missing clkctrl register for SHA2 instance clk: ti: clockdomain: fix static checker warning clk: ti: autoidle: add checks against NULL pointer reference clk: keystone: sci-clk: add 10% slack to set_rate clk: keystone: sci-clk: cache results of last query rate operation clk: keystone: sci-clk: fix parsing assigned-clock data during probe * clk-tegra: clk: tegra: Drop !provider check in tegra210_clk_emc_set_rate() * clk-rockchip: clk: rockchip: Initialize hw to error to avoid undefined behavior clk: rockchip: rk3399: Support module build clk: rockchip: fix the clk config to support module build clk: rockchip: Export some clock common APIs for module drivers clk: rockchip: Export rockchip_register_softrst() clk: rockchip: Export rockchip_clk_register_ddrclk() clk: rockchip: Use clk_hw_register_composite instead of clk_register_composite calls clk: rockchip: rk3308: drop unused mux_timer_src_p * clk-mediatek: clk: mediatek: Add MT8167 clock support dt-bindings: clock: mediatek: add bindings for MT8167 clocks clk: mediatek: add UART0 clock support
2020-10-20Merge branches 'clk-renesas', 'clk-amlogic', 'clk-allwinner', 'clk-samsung', ↵Stephen Boyd
'clk-doc' and 'clk-unused' into clk-next - Remove various unused variables in clk drivers * clk-renesas: clk: renesas: rcar-gen3: Update description for RZ/G2 clk: renesas: cpg-mssr: Add support for R-Car V3U clk: renesas: cpg-mssr: Add register pointers into struct cpg_mssr_priv clk: renesas: cpg-mssr: Use enum clk_reg_layout instead of a boolean flag dt-bindings: clock: renesas,cpg-mssr: Document r8a779a0 dt-bindings: clock: Add r8a779a0 CPG Core Clock Definitions dt-bindings: power: Add r8a779a0 SYSC power domain definitions clk: renesas: rcar-gen2: Rename vsp1-(sy|rt) clocks to vsp(s|r) clk: renesas: r8a7742: Add clk entry for VSPR * clk-amlogic: clk: meson: make shipped controller configurable clk: meson: g12a: mark fclk_div2 as critical clk: meson: axg-audio: fix g12a tdmout sclk inverter clk: meson: axg-audio: separate axg and g12a regmap tables clk: meson: add sclk-ws driver * clk-allwinner: clk: sunxi-ng: sun8i: r40: Use sigma delta modulation for audio PLL clk: sunxi-ng: add support for the Allwinner A100 CCU dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU * clk-samsung: clk: s2mps11: initialize driver via module_platform_driver clk: samsung: Use cached clk_hws instead of __clk_lookup() calls clk: samsung: exynos5420/5250: Add IDs to the CPU parent clk definitions clk: samsung: Add clk ID definitions for the CPU parent clocks clk: samsung: exynos5420: Avoid __clk_lookup() calls when enabling clocks clk: samsung: exynos5420: Add definition of clock ID for mout_sw_aclk_g3d clk: samsung: Keep top BPLL mux on Exynos542x enabled * clk-doc: clk: davinci: add missing kerneldoc clk: fixed: add missing kerneldoc * clk-unused: clk: socfpga: agilex: Remove unused variable 'cntr_mux' clk: si5341: drop unused 'err' variable clk: mmp: pxa1928: drop unused 'clk' variable clk: at91: drop unused at91sam9g45_pcr_layout
2020-10-20clk: imx8mq: Fix usdhc parents orderAbel Vesa
According to the latest RM (see Table 5-1. Clock Root Table), both usdhc root clocks have the parent order as follows: 000 - 25M_REF_CLK 001 - SYSTEM_PLL1_DIV2 010 - SYSTEM_PLL1_CLK 011 - SYSTEM_PLL2_DIV2 100 - SYSTEM_PLL3_CLK 101 - SYSTEM_PLL1_DIV3 110 - AUDIO_PLL2_CLK 111 - SYSTEM_PLL1_DIV8 So the audio_pll2_out and sys3_pll_out have to be swapped. Fixes: b80522040cd3 ("clk: imx: Add clock driver for i.MX8MQ CCM") Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reported-by: Cosmin Stefan Stoica <cosmin.stoica@nxp.com> Link: https://lore.kernel.org/r/1602753944-30757-1-git-send-email-abel.vesa@nxp.com Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-20clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already onStephen Boyd
If the GDSC is enabled out of boot but doesn't have the retain ff bit set we will get confusing results where the registers that are powered by the GDSC lose their contents on the first power off of the GDSC but thereafter they retain their contents. This is because gdsc_init() fails to make sure the RETAIN_FF bit is set when it probes the GDSC the first time and thus powering off the GDSC causes the register contents to be reset. We do set the RETAIN_FF bit the next time we power on the GDSC, see gdsc_enable(), so that subsequent GDSC power off's don't lose register contents state. Forcibly set the bit at device probe time so that the kernel's assumed view of the GDSC is consistent with the state of the hardware. This fixes a problem where the audio PLL doesn't work on sc7180 when the bootloader leaves the lpass_core_hm GDSC enabled at boot (e.g. to make a noise) but critically doesn't set the RETAIN_FF bit. Cc: Douglas Anderson <dianders@chromium.org> Cc: Taniya Das <tdas@codeaurora.org> Cc: Rajendra Nayak <rnayak@codeaurora.org> Fixes: 173722995cdb ("clk: qcom: gdsc: Add support to enable retention of GSDCR") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20201017020137.1251319-1-sboyd@kernel.org Reviewed-by: Taniya Das <tdas@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org>
2020-10-14clk: Restrict CLK_HSDK to ARC_SOC_HSDKGeert Uytterhoeven
The HSDK PLL driver is only useful when building for an ARC HSDK platform. As ARC selects OF, the dependency on OF can just be replaced by a dependency on ARC_SOC_HSDK. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200807094351.1046-1-geert+renesas@glider.be Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-14clk: at91: sam9x60: support only two programmable clocksClaudiu Beznea
According to datasheet (Chapter 29.16.13, PMC Programmable Clock Register) there are only two programmable clocks on SAM9X60. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1602686072-28296-1-git-send-email-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_ratePaul Cercueil
Clocks that don't have a divider are in our case all marked with the CLK_SET_RATE_PARENT flag. In this case, the .round_rate implementation should modify the value pointed to by parent_rate, in order to propagate the rate change to the parent, as explained in the documentation of clk_set_rate(). Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200903015048.3091523-5-paul@crapouillou.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENTPaul Cercueil
The custom clocks have custom functions to round, get or set their rate. Therefore, we can't assume that they need the CLK_SET_RATE_PARENT flag. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200903015048.3091523-4-paul@crapouillou.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: ingenic: Don't use CLK_SET_RATE_GATE for PLLPaul Cercueil
CLK_SET_RATE_GATE means that the clock must be gated when being reclocked. This is not the case for the PLLs in Ingenic SoCs. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200903015048.3091523-3-paul@crapouillou.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: ingenic: Use readl_poll_timeout instead of custom loopPaul Cercueil
Use the readl_poll_timeout() function instead of rolling our own busy-wait loops. This makes the code simpler. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200903015048.3091523-2-paul@crapouillou.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: ingenic: Use to_clk_info() macro for all clocksPaul Cercueil
The to_clk_info() previously had a BUG_ON() to check that it was only called for PLL clocks. Yet, all the other clocks were doing the exact same thing the macro does, in-line. Move the to_clk_info() macro to the top of the file, remove the hardcoded BUG_ON(), and use it everywhere it makes sense. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200903015048.3091523-1-paul@crapouillou.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: bcm2835: add missing release if devm_clk_hw_register failsNavid Emamdoost
In the implementation of bcm2835_register_pll(), the allocated pll is leaked if devm_clk_hw_register() fails to register hw. Release pll if devm_clk_hw_register() fails. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Link: https://lore.kernel.org/r/20200809231202.15811-1-navid.emamdoost@gmail.com Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: at91: clk-sam9x60-pll: remove unused variableClaudiu Beznea
Fix variable set but not used compilation warning. Fixes: 43b1bb4a9b3e ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1598338751-20607-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: at91: clk-main: update key before writing AT91_CKGR_MORClaudiu Beznea
SAMA5D2 datasheet specifies on chapter 33.22.8 (PMC Clock Generator Main Oscillator Register) that writing any value other than 0x37 on KEY field aborts the write operation. Use the key when selecting main clock parent. Fixes: 27cb1c2083373 ("clk: at91: rework main clk implementation") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1598338751-20607-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: at91: remove the checking of parent_nameClaudiu Beznea
There is no need to check parent_name variable while assigning it to init.parent_names. parent_name variable is already checked at the beginning of at91_clk_register_peripheral() function. Fixes: 6114067e437eb ("clk: at91: add PMC peripheral clocks") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1598338751-20607-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: clk-prima2: fix return value check in prima2_clk_init()Xu Wang
In case of error, the function clk_register() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20200921034522.9077-1-vulab@iscas.ac.cn Acked-by: Barry Song <baohua@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: mmp2: Fix the display clock divider baseLubomir Rintel
The LCD clock dividers are apparently based on one. No datasheet, determined empirically, but seems to be confirmed by line 19 of lcd.fth in OLPC laptop's Open Firmware [1]: h# 00000700 value pmua-disp-clk-sel \ PLL1 / 7 -> 113.86 MHz [1] https://raw.githubusercontent.com/quozl/openfirmware/65a08a73b2cac/cpu/arm/olpc/lcd.fth Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200925233914.227786-1-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: pxa: Constify static struct clk_opsRikard Falkeborn
Constify a couple of static struct clk_ops that are not modified. Their only usage is inside the macros and their address is passed to clk_register_composite() which takes pointers to const struct clk_ops. This allows the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200922184715.1854-1-rikard.falkeborn@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: baikal-t1: Mark Ethernet PLL as criticalSerge Semin
We've discovered that disabling the so called Ethernet PLL causes reset of the devices consuming its outgoing clock. The resets happen automatically even if each underlying clock gate is turned off. Due to that we can't disable the Ethernet PLL until the kernel is prepared for the corresponding resets. So for now just mark the PLL clock provider as critical. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: linux-mips@vger.kernel.org Link: https://lore.kernel.org/r/20200920110335.18034-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: qoriq: modify MAX_PLL_DIV to 32Zhao Qiang
On LS2088A, Watchdog need clk divided by 32, so modify MAX_PLL_DIV to 32 Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Link: https://lore.kernel.org/r/20200916030311.17280-1-qiang.zhao@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: axi-clkgen: Set power bits for fractional modeLars-Peter Clausen
Using the fractional dividers requires some additional power bits to be set. The fractional power bits are not documented and the current heuristic for setting them seems be insufficient for some cases. Just always set all the fractional power bits when in fractional mode. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201001085948.21412-2-alexandru.ardelean@analog.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: axi-clkgen: Add support for fractional dividersLars-Peter Clausen
The axi-clkgen has (optional) fractional dividers on the output clock divider and feedback clock divider path. Utilizing the fractional dividers allows for a better resolution of the output clock, being able to synthesize more frequencies. Rework the driver support to support the fractional register fields, both for setting a new rate as well as reading back the current rate from the hardware. For setting the rate if no perfect divider settings were found in non-fractional mode try again in fractional mode and see if better settings can be found. This appears to be the recommended mode of operation. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201001085948.21412-1-alexandru.ardelean@analog.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: qcom: Add display clock controller driver for SM8150 and SM8250Jonathan Marek
Add support for the display clock controller found on SM8150 and SM8250. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (SM8250) Link: https://lore.kernel.org/r/20200927190653.13876-3-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: qcom: add video clock controller driver for SM8250Jonathan Marek
Add support for the video clock controller found on SM8250 based devices. Derived from the downstream driver. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200923160635.28370-6-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: qcom: add video clock controller driver for SM8150Jonathan Marek
Add support for the video clock controller found on SM8150 based devices. Derived from the downstream driver. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200923160635.28370-5-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCsKonrad Dybcio
This change adds GDSCs, resets and most of the missing clocks to the msm8994 GCC driver. The remaining ones are of local_vote_clk and gate_clk type, which are not yet supported upstream. Also reorder them to match the original downstream driver. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20201005145855.149206-1-konradybcio@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: meson: use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1601233948-11629-11-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: mvebu: ap80x-cpu: use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1601233948-11629-10-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: uniphier: use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1601233948-11629-2-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk/qcom: fix spelling typoWang Qing
Modify the comment typo: "compliment" -> "complement". Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1600930506-394-1-git-send-email-wangqing@vivo.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: mediatek: Add MT8167 clock supportFabien Parent
Add the following clock support for MT8167 SoC: topckgen, apmixedsys, infracfg, audsys, imgsys, mfgcfg, vdecsys. Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20200918132303.2831815-2-fparent@baylibre.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-08clk: mediatek: add UART0 clock supportHanks Chen
Add MT6779 UART0 clock support. Fixes: 710774e04861 ("clk: mediatek: Add MT6779 clock support") Signed-off-by: Wendell Lin <wendell.lin@mediatek.com> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-07clk: rockchip: Initialize hw to error to avoid undefined behaviorStephen Boyd
We can get down to this return value from ERR_CAST() without initializing hw. Set it to -ENOMEM so that we always return something sane. Fixes the following smatch warning: drivers/clk/rockchip/clk-half-divider.c:228 rockchip_clk_register_halfdiv() error: uninitialized symbol 'hw'. drivers/clk/rockchip/clk-half-divider.c:228 rockchip_clk_register_halfdiv() warn: passing zero to 'ERR_CAST' Cc: Elaine Zhang <zhangqing@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Fixes: 956060a52795 ("clk: rockchip: add support for half divider") Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-03Merge tag 'imx-soc-5.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc i.MX SoC update for 5.10: - A series from Fabio Estevam to remove legacy non-DT i.MX platforms support and related board files. This is a natural move, as the platforms had been converted to DT for years, and we have not seen any users around these legacy non-DT support for a while. - Enable cpufreq support for i.MX7ULP platform. * tag 'imx-soc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (26 commits) clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: imx: Remove remnant board file support pieces ARM: imx: Remove imx device directory ARM: imx: Remove iomux-v3 board code ARM: imx3: Remove imx3 soc_init() ARM: imx31: Remove remaining i.MX31 board code ARM: imx27: Retrieve AVIC base address from devicetree ARM: imx27: Get rid of mm-imx27.c ARM: imx27: Remove iomux-v1 board code ARM: imx27: Remove imx27_soc_init() ARM: imx7ulp: enable cpufreq ... Link: https://lore.kernel.org/r/20200923073009.23678-2-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-23clk: tegra: Drop !provider check in tegra210_clk_emc_set_rate()Stephen Boyd
The provider variable is already dereferenced earlier in this function. Drop the check for NULL as it is impossible. Found with smatch drivers/clk/tegra/clk-tegra210-emc.c:131 tegra210_clk_emc_set_rate() warn: variable dereferenced before check 'provider' (see line 124) Cc: Joseph Lo <josephl@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Fixes: 0ac65fc946d3 ("clk: tegra: Implement Tegra210 EMC clock") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20200922191641.2305144-1-sboyd@kernel.org Acked-by: Thierry Reding <treding@nvidia.com>
2020-09-22clk: ti: dra7: add missing clkctrl register for SHA2 instanceTero Kristo
DRA7 SoC has two SHA instances. Add the clkctrl entry for the second one. Signed-off-by: Tero Kristo <t-kristo@ti.com> Link: https://lore.kernel.org/r/20200907082600.454-4-t-kristo@ti.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-22clk: ti: clockdomain: fix static checker warningTero Kristo
Fix a memory leak induced by not calling clk_put after doing of_clk_get. Reported-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Link: https://lore.kernel.org/r/20200907082600.454-3-t-kristo@ti.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-22clk: ti: autoidle: add checks against NULL pointer referenceTero Kristo
The clk pointer passed to omap2_clk_(deny|allow)_idle can be NULL, so add checks for this. Reported-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Link: https://lore.kernel.org/r/20200907082600.454-2-t-kristo@ti.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-22clk: keystone: sci-clk: add 10% slack to set_rateTero Kristo
Currently, we request exact clock rates from the firmware to be set with set_rate. Due to some rounding errors and internal functionality of the firmware itself, this can fail. Thus, add some slack to the set_rate functionality so that we are always guaranteed to pass. The firmware always attempts to use frequency as close to the target freq as possible despite the slack given here. Signed-off-by: Tero Kristo <t-kristo@ti.com> Link: https://lore.kernel.org/r/20200907085740.1083-4-t-kristo@ti.com Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-22clk: keystone: sci-clk: cache results of last query rate operationTero Kristo
Cache results of the latest query rate operation. This optimizes the firmware interface a bit, avoiding unnecessary calls to firmware if we know the result already; the firmware interface is pretty expensive to use for query rate functionality. Signed-off-by: Tero Kristo <t-kristo@ti.com> Link: https://lore.kernel.org/r/20200907085740.1083-3-t-kristo@ti.com Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-22clk: keystone: sci-clk: fix parsing assigned-clock data during probeTero Kristo
The DT clock probe loop incorrectly terminates after processing "clocks" only, fix this by re-starting the loop when all entries for current DT property have been parsed. Fixes: 8e48b33f9def ("clk: keystone: sci-clk: probe clocks from DT instead of firmware") Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Link: https://lore.kernel.org/r/20200907085740.1083-2-t-kristo@ti.com Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-22clk: mediatek: fix platform_no_drv_owner.cocci warningsZou Wei
./drivers/clk/mediatek/clk-mt6765.c:912:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Fixes: 1aca9939bf72 ("clk: mediatek: Add MT6765 clock support") Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1600761065-71353-1-git-send-email-zou_wei@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-22clk: mediatek: mt7629: simplify the return expression of mtk_infrasys_initLiu Shixin
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20200921082426.2591042-1-liushixin2@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-22clk: mediatek: mt6797: simplify the return expression of mtk_infrasys_initLiu Shixin
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20200921082425.2590990-1-liushixin2@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-22clk: socfpga: stratix10: fix the divider for the emac_ptp_free_clkDinh Nguyen
The fixed divider the emac_ptp_free_clk should be 2, not 4. Fixes: 07afb8db7340 ("clk: socfpga: stratix10: add clock driver for Stratix10 platform") Cc: stable@vger.kernel.org Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20200831202657.8224-1-dinguyen@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>