summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2019-03-14Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk subsystem updates from Stephen Boyd: "We have a fairly balanced mix of clk driver updates and clk framework updates this time around. It's the usual pile of new drivers for new hardware out there and the normal small fixes and updates, but then we have some core framework changes too. In the core framework, we introduce support for a clk_get_optional() API to get clks that may not always be populated and a way to devm manage clkdev lookups registered by provider drivers. We also do some refactoring to simplify the interface between clkdev and the common clk framework so we can reuse the DT parsing and clk_get() path in provider drivers in the future. This work will continue in the next few cycles while we convert how providers specify clk parents. On the driver side, the biggest part of the dirstat is the Amlogic clk driver that got support for the G12A SoC. It dominates with almost half the overall diff, while the second largest part of the diff is in the i.MX clk driver that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor and Qualcomm drivers rounding out the big part of the dirstat because they both got new hardware support for SoCs. The rest is just various updates and non-critical fixes for existing drivers. Core: - Convert a few clk bindings to JSON schema format - Add a {devm_}clk_get_optional() API - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups - Start rewriting clk parent registration and supporting device links by moving around code that supports clk_get() and DT parsing of the 'clocks' property New Drivers: - Add Qualcomm MSM8998 RPM managed clks - IPA clk support on Qualcomm RPMh clk controllers - Actions Semi S500 SoC clk support - Support for fixed rate clks populated from an MMIO register - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H - Add TMU (timer) clocks on Renesas RZ/G2E - Add Amlogic G12A Always-On Clock Controller - Add 32k clock generation for Amlogic AXG - Add support for the Mali GPU clocks on Amlogic Meson8 - Add Amlogic G12A EE clock controller driver - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E - Add i.MX8MM SoC clk driver support Removed Drivers: - Remove clps711x driver as the board support is gone Updates: - 3rd ECO fix for Mediatek MT2712 SoCs - Updates for Qualcomm MSM8998 GCC clks - Random static analysis fixes for clk drivers - Support for sleeping gpios in the clk-gpio type - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.) - Split LCDC into two clks on the Marvell MMP2 SoC - Various DT of_node refcount fixes - Get rid of CLK_IS_BASIC from TI code (yay!) - TI Autoidle clk support - Fix Amlogic Meson8 APB clock ID name - Claim input clocks through DT for Amlogic AXG and GXBB - Correct the DU (display unit) parent clock on Renesas RZ/G2E - Exynos5433 IMEM CMU crypto clk support (SlimSS) - Fix for the PLL-MIPI on the Allwinner A23 - Fix Rockchip rk3328 PLL rate calculation - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066 - i.MX SCU clk driver clk_set_parent() and cpufreq support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT clk: fixup default index for of_clk_get_by_name() clk: Move of_clk_*() APIs into clk.c from clkdev.c clk: Inform the core about consumer devices clk: Introduce of_clk_get_hw_from_clkspec() clk: core: clarify the check for runtime PM clk: Combine __clk_get() and __clk_create_clk() clk: imx8mq: add GPIO clocks to clock tree clk: mediatek: correct cpu clock name for MT8173 SoC clk: imx: Refactor entire sccg pll clk clk: imx: scu: add cpu frequency scaling support clk: mediatek: Mark bus and DRAM related clocks as critical clk: mediatek: Add flags to mtk_gate clk: mediatek: Add MUX_FLAGS macro clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks clk: ingenic: Remove set but not used variable 'enable' clk: at91: programmable: remove unneeded register read clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel clk: mediatek: add MUX_GATE_FLAGS_2 ...
2019-03-12treewide: add checks for the return value of memblock_alloc*()Mike Rapoport
Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-08clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPATTony Lindgren
Commit a72d785021cb ("clk: ti: Prepare for remove of OF node name") changed the code to use kasprintf() for provider->clkdm_name but also changed the offset used later on by three. We don't need to change the offset as we already have the extra three characters in the format for kasprintf with "%pOFnxxx". This caused the clocks with TI_CLK_CLKCTRL_COMPAT to have NULL clk->clkdm_name for omap4 and 5. And null clkdm_name can cause module reset, enable, and idle to fail. The issue can also be seen also when enabling DEBUG for clkctrl.c and then we start seeing "clock: could not associate" messages for omap4 and 5 as the generated name is something like "l4_wkclkdm" instead of "l4_wkup_clkdm" that's needed. Let's fix the issue with a partial revert of commit a72d785021cb ("clk: ti: Prepare for remove of OF node name"). ALso note that in general code should not depend on the dts node names. And the node names should be generic types like clock-domain in this case. This could be fixed later by using separate compatible properties for the clockdomains, or by adding soc_device_match() table with reg offsets to the driver. But let's fix the regression first. Fixes: a72d785021cb ("clk: ti: Prepare for remove of OF node name") Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-08clk: fixup default index for of_clk_get_by_name()Kuninori Morimoto
of_clk_get_by_name() is using -1 for __of_clk_get() index. It will go to of_parse_clkspec(), and be used for of_parse_phandle_with_args(). Here, if user doesn't specify clock name (= of_clk_get_by_name(np, NULL)), this index is still -1, and of_parse_phandle_with_args() will return -EINVAL (This index will be updated if if it had clock name). clk_get_by_name(np, NULL) should work, then, default index should be 0 instead of -1. This patch fixes it. Fixes: 4472287a3b2f ("clk: Introduce of_clk_get_hw_from_clkspec()") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-08Merge branch 'clk-parent-rewrite' (early part) into clk-nextStephen Boyd
* 'clk-parent-rewrite' (early part): clk: Move of_clk_*() APIs into clk.c from clkdev.c clk: Inform the core about consumer devices clk: Introduce of_clk_get_hw_from_clkspec() clk: core: clarify the check for runtime PM clk: Combine __clk_get() and __clk_create_clk()
2019-03-08Merge branches 'clk-typo', 'clk-json-schema', 'clk-mtk-2712-eco' and ↵Stephen Boyd
'clk-rockchip' into clk-next - Convert a few clk bindings to JSON schema format - 3rd ECO fix for Mediatek MT2712 SoCs * clk-typo: clk: samsung: fix typo * clk-json-schema: dt-bindings: clock: Convert fixed-factor-clock to json-schema dt-bindings: clock: Convert fixed-clock binding to json-schema * clk-mtk-2712-eco: clk: mediatek: update clock driver of MT2712 dt-bindings: clock: add clock for MT2712 * clk-rockchip: clk: rockchip: add CLK_SET_RATE_PARENT for rk3066 lcdc dclks clk: rockchip: fix frac settings of GPLL clock for rk3328
2019-03-08Merge branch 'clk-at91' into clk-nextStephen Boyd
* clk-at91: clk: at91: programmable: remove unneeded register read clk: at91: optimize clk_round_rate() for AUDIO_PLL clk: at91: enable AUDIOPLL as source for PCKx on SAMA5D2
2019-03-08Merge branches 'clk-ingenic', 'clk-mtk-mux', 'clk-qcom-sdm845-pcie', ↵Stephen Boyd
'clk-mtk-crit' and 'clk-mtk' into clk-next * clk-ingenic: clk: ingenic: Remove set but not used variable 'enable' clk: ingenic: Fix doc of ingenic_cgu_div_info clk: ingenic: Fix round_rate misbehaving with non-integer dividers clk: ingenic: jz4740: Fix gating of UDC clock * clk-mtk-mux: clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel clk: mediatek: add MUX_GATE_FLAGS_2 * clk-qcom-sdm845-pcie: clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks * clk-mtk-crit: clk: mediatek: Mark bus and DRAM related clocks as critical clk: mediatek: Add flags to mtk_gate clk: mediatek: Add MUX_FLAGS macro * clk-mtk: clk: mediatek: correct cpu clock name for MT8173 SoC
2019-03-08Merge branches 'clk-qcom-msm8998', 'clk-fractional-parent', 'clk-x86-mv' and ↵Stephen Boyd
'clk-SA-fixes' into clk-next - Updates for qcom MSM8998 GCC clks - qcom MSM8998 RPM managed clks - Random static analysis fixes for clk drivers * clk-qcom-msm8998: clk: qcom: Make common clk_hw registrations clk: qcom: smd: Add support for MSM8998 rpm clocks clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998 clk: qcom: Add missing freq for usb30_master_clk on 8998 clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks * clk-fractional-parent: clk: fractional-divider: check parent rate only if flag is set * clk-x86-mv: clk: x86: Move clk-lpss.h to platform_data/x86 * clk-SA-fixes: clk: mediatek: fix platform_no_drv_owner.cocci warnings clk: tegra: dfll: Fix debugfs_simple_attr.cocci warnings clk: qoriq: Improve an error message
2019-03-08Merge branches 'clk-qcom-rpmh', 'clk-gpio-sleep', 'clk-stm32mp1', ↵Stephen Boyd
'clk-qcom-qcs404' and 'clk-actions-s500' into clk-next - IPA clk support on Qualcomm RPMh clk controllers - Support sleeping gpios in clk-gpio type - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.) - Actions Semi S500 SoC clk support * clk-qcom-rpmh: clk: qcom: clk-rpmh: Add IPA clock support * clk-gpio-sleep: clk: clk-gpio: add support for sleeping GPIOs in gpio-gate-clk * clk-stm32mp1: dt-bindings: clock: remove unused definition for stm32mp1 clk: stm32mp1: fix bit width of hse_rtc divider clk: stm32mp1: remove unnecessary CLK_DIVIDER_ALLOW_ZERO flag clk: stm32mp1: fix HSI divider flag clk: stm32mp1: fix mcu divider table clk: stm32mp1: set ck_csi as critical clock clk: stm32mp1: add CLK_SET_RATE_NO_REPARENT to Kernel clocks clk: stm32mp1: parent clocks update * clk-qcom-qcs404: clk: qcom: gcc-qcs404: Add cfg_offset for blsp1_uart3 clock clk: qcom: clk-rcg2: Introduce a cfg offset for RCGs clk: qcom: remove empty lines in clk-rcg.h * clk-actions-s500: clk: actions: Add clock driver for S500 SoC dt-bindings: clock: Add DT bindings for Actions Semi S500 CMU clk: actions: Add configurable PLL delay
2019-03-08Merge branches 'clk-imx', 'clk-samsung', 'clk-ti', 'clk-uniphier-gear' and ↵Stephen Boyd
'clk-mmp2-lcdc' into clk-next - Split LCDC into two clks on the Marvell MMP2 SoC * clk-imx: clk: imx8mq: add GPIO clocks to clock tree clk: imx: Refactor entire sccg pll clk clk: imx: scu: add cpu frequency scaling support clk: imx: imx8mm: Mark init function __init clk: imx8mq: Add the missing ARM clock dt-bindings: imx8mq-clock: Add the missing ARM clock clk: imx: imx8mq: Fix the rate propagation for arm pll clk: imx8mq: Add support for the CLKO1 clock clk: imx8mq: Fix the CLKO2 source select list clk: imx8mq: Add missing M4 clocks clk: imx: Add clock driver support for imx8mm dt-bindings: imx: Add clock binding doc for imx8mm clk: imx: Add PLLs driver for imx8mm soc clk: imx5: add imx5_SCC2_IPG_GATE clk: imx: scu: add set parent support clk: imx: scu: add fallback compatible string support clk: imx8mq: Make parent names arrays const pointers clk: imx: Make parents const pointer in mux wrappers clk: imx: Make parent_names const pointer in composite-8m * clk-samsung: clk: samsung: s3c2443: Mark expected switch fall-through clk: samsung: exynos5: Fix kfree() of const memory on setting driver_override clk: samsung: exynos5: Fix possible NULL pointer exception on platform_device_alloc() failure clk: samsung: exynos5433: Add selected IMEM clocks clk: samsung: dt-bindings: Document Exynos5433 IMEM CMU clk: samsung: exynos5433: Fix name typo in sssx clk: samsung: exynos5433: Fix definition of CLK_ACLK_IMEM_{200, 266} clocks clk: samsung: dt-bindings: Add Exynos5433 IMEM CMU clock IDs * clk-ti: clk: clk-twl6040: Fix imprecise external abort for pdmclk ARM: OMAP2+: hwmod: disable ick autoidling when a hwmod requires that clk: ti: check clock type before doing autoidle ops clk: ti: add a usecount for autoidle clk: ti: generalize the init sequence of clk_hw_omap clocks clk: ti: remove usage of CLK_IS_BASIC clk: ti: add new API for checking if a provided clock is an OMAP clock clk: ti: move clk_hw_omap list handling under generic part of the driver * clk-uniphier-gear: clk: uniphier: Fix update register for CPU-gear * clk-mmp2-lcdc: clk: mmp2: separate LCDC peripheral clk form the display clock dt-bindings: marvell,mmp2: Add clock id for the LCDC clock
2019-03-08Merge branches 'clk-optional', 'clk-devm-clkdev-register', 'clk-allwinner', ↵Stephen Boyd
'clk-meson' and 'clk-renesas' into clk-next - Add a {devm_}clk_get_optional() API - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups * clk-optional: clk: Add (devm_)clk_get_optional() functions clk: Add comment about __of_clk_get_by_name() error values * clk-devm-clkdev-register: clk: clk-st: avoid clkdev lookup leak at remove clk: clk-max77686: Clean clkdev lookup leak and use devm clkdev: add managed clkdev lookup registration * clk-allwinner: clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it * clk-meson: (22 commits) clk: meson: meson8b: fix the naming of the APB clocks dt-bindings: clock: meson8b: add APB clock definition clk: meson: Add G12A AO Clock + Reset Controller dt-bindings: clk: add G12A AO Clock and Reset Bindings clk: meson: factorise meson64 peripheral clock controller drivers clk: meson: g12a: add peripheral clock controller dt-bindings: clk: meson: add g12a periph clock controller bindings clk: meson: pll: update driver for the g12a clk: meson: rework and clean drivers dependencies clk: meson: axg-audio does not require syscon clk: meson: use CONFIG_ARCH_MESON to enter meson clk directory clk: export some clk_hw function symbols for module drivers clk: meson: ao-clkc: claim clock controller input clocks from DT clk: meson: axg: claim clock controller input clock from DT clk: meson: gxbb: claim clock controller input clock from DT clk: meson: meson8b: add the GPU clock tree clk: meson: meson8b: use a separate clock table for Meson8 clk: meson: axg-ao: add 32k generation subtree clk: meson: gxbb-ao: replace cec-32k with the dual divider clk: meson: add dual divider clock driver ... * clk-renesas: clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK clk: renesas: r8a774c0: Fix LAST_DT_CORE_CLK clk: renesas: r8a774c0: Add TMU clock clk: renesas: r8a77980: Add RPC clocks clk: renesas: rcar-gen3: Add RPC clocks clk: renesas: rcar-gen3: Add spinlock clk: renesas: rcar-gen3: Factor out cpg_reg_modify() clk: renesas: r8a774c0: Correct parent clock of DU clk: renesas: r8a774a1: Add missing CANFD clock clk: renesas: r8a774c0: Add missing CANFD clock
2019-03-08Merge branches 'clk-of-refcount', 'clk-mmio-fixed-clock', 'clk-remove-clps', ↵Stephen Boyd
'clk-socfpga-parent' and 'clk-struct-size' into clk-next - Various DT of_node refcount fixes - Support for fixed rate clks populated from an MMIO register - Remove clps711x driver as the board support is gone * clk-of-refcount: clk: dove: fix refcount leak in dove_clk_init() clk: mv98dx3236: fix refcount leak in mv98dx3236_clk_init() clk: armada-xp: fix refcount leak in axp_clk_init() clk: kirkwood: fix refcount leak in kirkwood_clk_init() clk: armada-370: fix refcount leak in a370_clk_init() clk: vf610: fix refcount leak in vf610_clocks_init() clk: imx7d: fix refcount leak in imx7d_clocks_init() clk: imx6sx: fix refcount leak in imx6sx_clocks_init() clk: imx6q: fix refcount leak in imx6q_clocks_init() clk: samsung: exynos4: fix refcount leak in exynos4_get_xom() clk: socfpga: fix refcount leak clk: ti: fix refcount leak in ti_dt_clocks_register() clk: qoriq: fix refcount leak in clockgen_init() clk: highbank: fix refcount leak in hb_clk_init() * clk-mmio-fixed-clock: clk: Add Fixed MMIO clock driver dt-bindings: clk: Add bindings for Fixed MMIO clock * clk-remove-clps: clk: clps711x: Remove board support * clk-socfpga-parent: clk: socfpga: Don't have get_parent for single parent ops * clk-struct-size: clk: imx: imx7ulp: use struct_size() in kzalloc()
2019-03-06Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, the drivers/tee and drivers/reset subsystems get merged here, with the expected set of smaller updates and some new hardware support. The tee subsystem now supports device drivers to be attached to a tee, the first example here is a random number driver with its implementation in the secure world. Three new power domain drivers get added for specific chip families: - Broadcom BCM283x chips (used in Raspberry Pi) - Qualcomm Snapdragon phone chips - Xilinx ZynqMP FPGA SoCs One new driver is added to talk to the BPMP firmware on NVIDIA Tegra210 Existing drivers are extended for new SoC variants from NXP, NVIDIA, Amlogic and Qualcomm" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits) tee: optee: update optee_msg.h and optee_smc.h to dual license tee: add cancellation support to client interface dpaa2-eth: configure the cache stashing amount on a queue soc: fsl: dpio: configure cache stashing destination soc: fsl: dpio: enable frame data cache stashing per software portal soc: fsl: guts: make fsl_guts_get_svr() static hwrng: make symbol 'optee_rng_id_table' static tee: optee: Fix unsigned comparison with less than zero hwrng: Fix unsigned comparison with less than zero tee: fix possible error pointer ctx dereferencing hwrng: optee: Initialize some structs using memset instead of braces tee: optee: Initialize some structs using memset instead of braces soc: fsl: dpio: fix memory leak of a struct qbman on error exit path clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static soc: qcom: llcc-slice: Fix typos qcom: soc: llcc-slice: Consolidate some code qcom: soc: llcc-slice: Clear the global drv_data pointer on error drivers: soc: xilinx: Add ZynqMP power domain driver firmware: xilinx: Add APIs to control node status/power dt-bindings: power: Add ZynqMP power domain bindings ...
2019-03-01clk: Move of_clk_*() APIs into clk.c from clkdev.cStephen Boyd
The API between clk.c and clkdev.c is purely getting the clk_hw structure (or the struct clk if it's not CCF) and then turning that struct clk_hw pointer into a struct clk pointer via clk_hw_create_clk(). There's no need to complicate clkdev.c with these DT parsing details that are only relevant to the common clk framework. Move the DT parsing logic into the core framework and just expose the APIs to get a clk_hw pointer and convert it. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-01clk: Inform the core about consumer devicesStephen Boyd
We'd like to have a pointer to the device that's consuming a particular clk in the clk framework so we can link the consumer to the clk provider with a PM device link. Add a device argument to clk_hw_create_clk() for this so it can be used in subsequent patches to add and remove the link. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-01clk: Introduce of_clk_get_hw_from_clkspec()Stephen Boyd
We want to get struct clk_hw pointers from a DT clk specifier (i.e. a clocks property) so that we can find parent clks without searching for globally unique clk names. This should save time by avoiding the global string search for clks that are external to the clock controller providing the clk and let us move away from string comparisons in general. Introduce of_clk_get_hw_from_clkspec() which is largely the DT parsing part of finding clks implemented in clkdev.c and have that return a clk_hw pointer instead of converting that into a clk pointer. This lets us push up the clk pointer creation to the caller in clk_get() and avoids the need to push the dev_id and con_id throughout the DT parsing code. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-01clk: core: clarify the check for runtime PMMiquel Raynal
Currently, the core->dev entry is populated only if runtime PM is enabled. Doing so prevents accessing the device structure in any case. Keep the same logic but instead of using the presence of core->dev as the only condition, also check the status of pm_runtime_enabled(). Then, we can set the core->dev pointer at any time as long as a device structure is available. This change will help supporting device links in the clock subsystem. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> [sboyd@kernel.org: Change to a boolean flag] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-01clk: Combine __clk_get() and __clk_create_clk()Stephen Boyd
The __clk_get() function is practically a private clk implementation detail now. No architecture defines it, and given that new code should be using the common clk framework there isn't a need for it to keep existing just to serve clkdev purposes. Let's fold it into the __clk_create_clk() function and make that a little more generic by renaming it to clk_hw_create_clk(). This will allow the framework to create a struct clk handle to a particular clk_hw pointer and link it up as a consumer wherever that's needed. Doing this also lets us get rid of the __clk_free_clk() API that had to be kept in sync with __clk_put(). Splitting that API up into the "link and unlink from consumer list" phase and "free the clk pointer" phase allows us to reuse that logic in a couple places, simplifying the code. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-28clk: imx8mq: add GPIO clocks to clock treeAnson Huang
i.MX8MQ has clock gate for each GPIO bank, add them into clock tree for GPIO driver to manage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26clk: mediatek: correct cpu clock name for MT8173 SoCSeiya Wang
Correct cpu clock name from ca57 to ca72 since MT8173 does use cortex-a72. Signed-off-by: Seiya Wang <seiya.wang@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26clk: imx: Refactor entire sccg pll clkAbel Vesa
Make the entire combination of plls to be one single clock. The parents used for bypasses are specified each as an index in the parents list. The determine_rate does a lookup throughout all the possible combinations for all the divs and returns the best possible 'setup' which in turn is used by set_rate later to set up all the divs and bypasses. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Tested-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26clk: imx: scu: add cpu frequency scaling supportAnson Huang
On NXP's i.MX SoCs with system controller inside, CPU frequency scaling can ONLY be done by system controller firmware, and it can ONLY be requested from secure mode, so Linux kernel has to call ARM SMC to trap to ARM-Trusted-Firmware to request system controller firmware to do CPU frequency scaling. This patch adds i.MX system controller CPU frequency scaling support, it reuses cpufreq-dt driver and implement the CPU frequency scaling inside SCU clock driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26clk: mediatek: Mark bus and DRAM related clocks as criticalJasper Mattsson
Currently, DRAM-related clocks are not marked with CLK_IS_CRITICAL for MT6797. This causes memory corruption when the system is booted without clk_ignore_unused. This patch marks MUX ddrphycfg_sel as well as gates infra_dramc_f26m and infra_dramc_b_f26m as CLK_IS_CRITICAL. Signed-off-by: Jasper Mattsson <jasu@njomotys.info> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26clk: mediatek: Add flags to mtk_gateJasper Mattsson
This is required to mark gates as CLK_IS_CRITICAL. Signed-off-by: Jasper Mattsson <jasu@njomotys.info> Acked-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26clk: mediatek: Add MUX_FLAGS macroJasper Mattsson
This is required to mark outputs of certain MUXes as CLK_IS_CRITICAL. Signed-off-by: Jasper Mattsson <jasu@njomotys.info> Acked-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocksBjorn Andersson
The PCIe PIPE clock in the GCC is fed by the PIPE clock coming from the PHY, describe this relationship. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26clk: ingenic: Remove set but not used variable 'enable'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/clk/ingenic/cgu.c: In function 'ingenic_pll_recalc_rate': drivers/clk/ingenic/cgu.c:86:15: warning: variable 'enable' set but not used [-Wunused-but-set-variable] It's not used after commit ab27eb4bc365 ("clk: ingenic: Add code to enable/disable PLLs") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-25clk: at91: programmable: remove unneeded register readNicolas Ferre
This register read is a leftover of a previous read/modify/write. We now use regmap_update_bits(), so we don't need it anymore. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-25clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_selchunhui dai
The MUX clock of dpi1_sel should select the closet clock for itself. We could add this flag to enable this function of MUX in CCF. Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: wangyan wang <wangyan.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-25clk: mediatek: add MUX_GATE_FLAGS_2chunhui dai
Add MUX_GATE_FLAGS_2 for the clock which needs to set two falgs. Such as some mux need to set the flags of "CLK_MUX_ROUND_CLOSEST". Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: wangyan wang <wangyan.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-25clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLKFabrizio Castro
Enum LAST_DT_CORE_CLK needs updating as R8A774A1_CLK_CANFD was recently added and it's the core clock with the highest index. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Fixes: 9d034e151b40 ("clk: renesas: r8a774a1: Add missing CANFD clock") Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: ingenic: Fix doc of ingenic_cgu_div_infoPaul Cercueil
The 'div' field does not represent a number of bits used to divide (understand: right-shift) the divider, but a number itself used to divide the divider. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: ingenic: Fix round_rate misbehaving with non-integer dividersPaul Cercueil
Take a parent rate of 180 MHz, and a requested rate of 4.285715 MHz. This results in a theorical divider of 41.999993 which is then rounded up to 42. The .round_rate function would then return (180 MHz / 42) as the clock, rounded down, so 4.285714 MHz. Calling clk_set_rate on 4.285714 MHz would round the rate again, and give a theorical divider of 42,0000028, now rounded up to 43, and the rate returned would be (180 MHz / 43) which is 4.186046 MHz, aka. not what we requested. Fix this by rounding up the divisions. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Maarten ter Huurne <maarten@treewalker.org> Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: mediatek: fix platform_no_drv_owner.cocci warningsYueHaibing
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: tegra: dfll: Fix debugfs_simple_attr.cocci warningsYueHaibing
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: qoriq: Improve an error messageDan Carpenter
We intended to print "ret" but there is a copy and paste bug from the previous error message. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: at91: optimize clk_round_rate() for AUDIO_PLLMichał Mirosław
Stop the search for parent rate when exact match is found. This makes for 3 clk_round_rate() calls instead of 64 of them on SAMA5D2-based board when searching for 12.288MHz clock. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: x86: Move clk-lpss.h to platform_data/x86Andy Shevchenko
clk-lpss.h is solely x86 related header. Move it to correct folder. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: fractional-divider: check parent rate only if flag is setKatsuhiro Suzuki
Custom approximation of fractional-divider may not need parent clock rate checking. For example Rockchip SoCs work fine using grand parent clock rate even if target rate is greater than parent. This patch checks parent clock rate only if CLK_SET_RATE_PARENT flag is set. For detailed example, clock tree of Rockchip I2S audio hardware. - Clock rate of CPLL is 1.2GHz, GPLL is 491.52MHz. - i2s1_div is integer divider can divide N (N is 1~128). Input clock is CPLL or GPLL. Initial divider value is N = 1. Ex) PLL = CPLL, N = 10, i2s1_div output rate is CPLL / 10 = 1.2GHz / 10 = 120MHz - i2s1_frac is fractional divider can divide input to x/y, x and y are 16bit integer. CPLL --> | selector | ---> i2s1_div -+--> | selector | --> I2S1 MCLK GPLL --> | | ,--------------' | | `--> i2s1_frac ---> | | Clock mux system try to choose suitable one from i2s1_div and i2s1_frac for master clock (MCLK) of I2S1. Bad scenario as follows: - Try to set MCLK to 8.192MHz (32kHz audio replay) Candidate setting is - i2s1_div: GPLL / 60 = 8.192MHz i2s1_div candidate is exactly same as target clock rate, so mux choose this clock source. i2s1_div output rate is changed 491.52MHz -> 8.192MHz - After that try to set to 11.2896MHz (44.1kHz audio replay) Candidate settings are - i2s1_div : CPLL / 107 = 11.214945MHz - i2s1_frac: i2s1_div = 8.192MHz This is because clk_fd_round_rate() thinks target rate (11.2896MHz) is higher than parent rate (i2s1_div = 8.192MHz) and returns parent clock rate. Above is current upstreamed behavior. Clock mux system choose i2s1_div, but this clock rate is not acceptable for I2S driver, so users cannot replay audio. Expected behavior is: - Try to set master clock to 11.2896MHz (44.1kHz audio replay) Candidate settings are - i2s1_div : CPLL / 107 = 11.214945MHz - i2s1_frac: i2s1_div * 147/6400 = 11.2896MHz Change i2s1_div to GPLL / 1 = 491.52MHz at same time. If apply this commit, clk_fd_round_rate() calls custom approximate function of Rockchip even if target rate is higher than parent. Custom function changes both grand parent (i2s1_div) and parent (i2s_frac) settings at same time. Clock mux system can choose i2s1_frac and audio works fine. Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Reviewed-by: Heiko Stuebner <heiko@sntech.de> [sboyd@kernel.org: Make function into a macro instead] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: qcom: Make common clk_hw registrationsJeffrey Hugo
Several clock controller drivers define a list of clk_hw devices, and then register those devices in probe() before using common code to process the rest of initialization. Extend the common code to accept a list of clk_hw devices to process, thus eliminating many duplicate implementations. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Suggested-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: actions: Add clock driver for S500 SoCManivannan Sadhasivam
Add common clock driver for Actions Semi S500 SoC. Signed-off-by: Edgar Bernardi Righi <edgar.righi@lsitec.org.br> [Mani: cleaned up the driver] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: actions: Add configurable PLL delayManivannan Sadhasivam
S500 SoC requires configurable delay for different PLLs. Hence, add a separate macro for declaring a PLL with configurable delay and also modify the existing OWL_PLL_NO_PARENT macro to use default delay so that no need to modify the existing S700/S900 drivers. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx: imx8mm: Mark init function __initStephen Boyd
It calls another __init marked function and thus causes a section mismatch if we don't mark it this way. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: qcom: gcc-qcs404: Add cfg_offset for blsp1_uart3 clockTaniya Das
The CFG/M/N/D registers are at an offset of 0x20 from the CMD register only for blsp1_uart3 clock, so add it for uart3 only. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Anu Ramanathan <anur@codeaurora.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: qcom: clk-rcg2: Introduce a cfg offset for RCGsTaniya Das
The RCG CFG/M/N/D register base could be at a different offset than the CMD register, so introduce a cfg_offset to identify the offset with respect to the CMD RCGR register. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Anu Ramanathan <anur@codeaurora.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: qcom: remove empty lines in clk-rcg.hVinod Koul
Remove the redundant empty lines crept in. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: stm32mp1: fix bit width of hse_rtc dividerGabriel Fernandez
Fix the bit width of the hse rtc divider because it's off by one. Fixes: 2c87c9d33117 ("clk: stm32mp1: add RTC clock") Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: stm32mp1: remove unnecessary CLK_DIVIDER_ALLOW_ZERO flagGabriel Fernandez
The divisor of ethptp_k and ck_hse_rtc clocks is: 'value register plus one'. Then CLK_DIVIDER_ALLOW_ZERO flag has no effect and is useless here. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: stm32mp1: fix HSI divider flagGabriel Fernandez
The divider of HSI (clk-hsi-div) is power of two divider. Fixes: 9bee94e7b7da ("clk: stm32mp1: Introduce STM32MP1 clock driver") Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>