| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple more patches that would be good to get into -rc1:
- Revert an i.MX patch that's causing video failures because division
math goes sideways
- Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit
variable instead of the usual u64 type
- Fix a Kconfig bug in the StarFive JH7110 clk config that selects a
reset controller when it can't be selected"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case
clk: sp7021: Adjust width of _m in HWM_FIELD_PREP()
Revert "clk: imx: composite-8m: Add support to determine_rate"
|
|
When (ARCH_STARFIVE [=n] && COMPILE_TEST [=y] && RESET_CONTROLLER [=n]),
RESET_STARFIVE_JH7110 can't be selected by CLK_STARFIVE_JH7110_SYS
and CLK_STARFIVE_JH7110_AON.
Add a condition `if RESET_CONTROLLER` to fix it. Also, delete redundant
selected options of CLK_STARFIVE_JH7110_AON because these options are
already selected by the dependency.
Fixes: edab7204afe5 ("clk: starfive: Add StarFive JH7110 system clock driver")
Fixes: b2ab3c94f41f ("clk: starfive: Add StarFive JH7110 always-on clock driver")
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230418123756.62495-2-hal.feng@starfivetech.com
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
When building with clang + W=1, there is a warning around an internal
comparison check within the FIELD_PREP() macro, due to a 32-bit variable
comparison against ~0ull:
drivers/clk/clk-sp7021.c:316:8: error: result of comparison of constant 18446744073709551615 with expression of type 'typeof (_Generic((_m), ...' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
r0 |= HWM_FIELD_PREP(MASK_SEL_FRA, clk->p[SEL_FRA]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/clk/clk-sp7021.c:45:15: note: expanded from macro 'HWM_FIELD_PREP'
(_m << 16) | FIELD_PREP(_m, value); \
^~~~~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:114:3: note: expanded from macro 'FIELD_PREP'
__BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:71:53: note: expanded from macro '__BF_FIELD_CHECK'
BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) > \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/compiler_types.h:397:22: note: expanded from macro 'compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler_types.h:385:23: note: expanded from macro '_compiletime_assert'
__compiletime_assert(condition, msg, prefix, suffix)
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler_types.h:377:9: note: expanded from macro '__compiletime_assert'
if (!(condition)) \
^~~~~~~~~
This is expected given the types of the input. Increase the size of the
temporary variable in HWM_FIELD_PREP() to eliminate the warning, which
follows the logic of commit cfd6fb45cfaf ("crypto: ccree - avoid
out-of-range warnings from clang") for the same reasons.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230501-sp7021-field_prep-warning-v1-1-5b36d71feefe@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/202303221947.pXP2v4xJ-lkp@intel.com/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This reverts commit 156e96ff2172518b6f83e97d8f11f677bc668e22.
This patch was found to cause some division issues on the i.MX8MP
which causes the video clocks to not properly divide when division
was greate than 8. This causes video failures on disp1_pix and
disp2_pix clocks.
Until a better solution is found, we'll have to revert this.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20230423123828.1346511-1-aford173@gmail.com
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Nothing looks out of the ordinary in this batch of clk driver updates.
There are a couple patches to the core clk framework, but they're all
basically cleanups or debugging aids. The driver updates and new
additions are dominated in the diffstat by Qualcomm and MediaTek
drivers. Qualcomm gained a handful of new drivers for various SoCs,
and MediaTek gained a bunch of drivers for MT8188. The MediaTek
drivers are being modernized as well, so there are updates all over
that vendor's clk drivers. There's also a couple other new clk drivers
in here, for example the Starfive JH7110 SoC support is added.
Outside of the two major SoC vendors though, we have the usual
collection of non-critical fixes and cleanups to various clk drivers.
It's good to see that we're getting more cleanups and modernization
patches. Maybe one day we'll be able to properly split clk providers
from clk consumers.
Core:
- Print an informational message before disabling unused clks
New Drivers:
- BCM63268 timer clock and reset controller
- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
MT8195 SoCs
- Mediatek MT8188 SoC clk drivers
- Clock driver for Sunplus SP7021 SoC
- Clk driver support for Loongson-2 SoCs
- Clock driver for Skyworks Si521xx I2C PCIe clock generators
- Initial Starfive JH7110 clk/reset support
- Global clock controller drivers for Qualcomm SM7150, IPQ9574,
MSM8917 and IPQ5332 SoCs
- GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P
SoCs
Updates:
- Shrink size of clk_fractional_divider a little
- Convert various clk drivers to devm_of_clk_add_hw_provider()
- Convert platform clk drivers to remove_new()
- Converted most Mediatek clock drivers to struct platform_driver
- MediaTek clock drivers can be built as modules
- Reimplement Loongson-1 clk driver with DT support
- Migrate socfpga clk driver to of_clk_add_hw_provider()
- Support for i3c clks on Aspeed ast2600 SoCs
- Add clock generic devm_clk_hw_register_gate_parent_data
- Add audiomix block control for i.MX8MP
- Add support for determine_rate to i.MX composite-8m
- Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
- Provide clock name in error message for clk-gpr-mux on get parent
failure
- Drop duplicate imx_clk_mux_flags macro
- Register the i.MX8MP Media Disp2 Pix clock as bus clock
- Add Media LDB root clock to i.MX8MP
- Make i.MX8MP nand_usdhc_bus clock as non-critical
- Fix the rate table for i.MX fracn-gppll
- Disable HW control for the fracn-gppll in order to be controlled by
register write
- Add support for interger PLL in fracn-gppll
- Add mcore_booted module parameter to i.MX93 provider
- Add NIC, A55 and ARM PLL clocks to i.MX93
- Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
- Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP
to get more accurate clock rates
- Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
- Update some of the i.MX critical clocks flags to allow glitchless
on-the-fly rate change.
- Add I2C5 clock on Renesas R-Car V3H
- Exynos850: Add CMU_G3D clock controller for the Mali GPU
- Extract Exynos5433 (ARM64) clock controller power management code
to common driver parts
- Exynos850: make PMU_ALIVE_PCLK clock critical
- Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car
V4H
- Add video capture (VIN) clocks on Renesas R-Car V3H
- Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
- Support for Stromer Plus PLL on Qualcomm IPQ5332
- Add a missing reset to Qualcomm QCM2290
- Migrate Qualcomm IPQ4019 to clk_parent_data
- Make USB GDSCs enter retention state when disabled on Qualcomm
SM6375, MSM8996 and MSM8998 SoCs
- Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
- Add two EMAC GDSCs on Qualcomm SC8280XP
- Use shared rcg clk ops in Qualcomm SM6115 GCC
- Park Qualcomm SM8350 PCIe PIPE clks when disabled
- Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
- Add missing XO clocks to Qualcomm MSM8226 and MSM8974
- Convert some Qualcomm clk DT bindings to YAML
- Reparenting fix for the clock supplying camera modules on Rockchip
rk3399
- Mark more critical (bus-)clocks on Rockchip rk3588"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits)
clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
clk: rockchip: rk3588: make gate linked clocks critical
clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
clk: qcom: add the GPUCC driver for sa8775p
dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
clk: starfive: Avoid casting iomem pointers
clk: microchip: fix potential UAF in auxdev release callback
clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
clk: mediatek: fhctl: Mark local variables static
clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
clk: uniphier: Use managed `of_clk_add_hw_provider()`
clk: si5351: Use managed `of_clk_add_hw_provider()`
clk: si570: Use managed `of_clk_add_hw_provider()`
clk: si514: Use managed `of_clk_add_hw_provider()`
clk: lmk04832: Use managed `of_clk_add_hw_provider()`
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
|
|
* clk-imx: (25 commits)
clk: imx: imx8ulp: update clk flag for system critical clock
clk: imx: imx8ulp: Add tpm5 clock as critical gate clock
clk: imx: imx8ulp: keep MU0_B clock enabled always
clk: imx: imx8ulp: Add divider closest support to get more accurate clock rate
clk: imx: imx8ulp: Fix XBAR_DIVBUS and AD_SLOW clock parents
clk: imx: imx93: Add nic and A55 clk
dt-bindings: clock: imx93: add NIC, A55 and ARM PLL CLK
clk: imx: imx93: add mcore_booted module paratemter
clk: imx: fracn-gppll: Add 300MHz freq support for imx9
clk: imx: fracn-gppll: support integer pll
clk: imx: fracn-gppll: disable hardware select control
clk: imx: fracn-gppll: fix the rate table
clk: imx: imx8mp: change the 'nand_usdhc_bus' clock to non-critical
clk: imx: imx8mp: Add LDB root clock
dt-bindings: clock: imx8mp: Add LDB clock entry
clk: imx: imx8mp: correct DISP2 pixel clock type
clk: imx: drop duplicated macro
clk: imx: clk-gpr-mux: Provide clock name in error message
clk: imx: Let IMX8MN_CLK_DISP_PIXEL set parent rate
clk: imx8mm: Let IMX8MM_CLK_LCDIF_PIXEL set parent rate
...
|
|
clk-next
* clk-of:
clk: add missing of_node_put() in "assigned-clocks" property parsing
* clk-samsung:
clk: samsung: exynos850: Make PMU_ALIVE_PCLK critical
clk: samsung: Convert to platform remove callback returning void
clk: samsung: exynos5433: Extract PM support to common ARM64 layer
clk: samsung: Extract parent clock enabling to common function
clk: samsung: Extract clocks registration to common function
clk: samsung: exynos850: Add AUD and HSI main gate clocks
clk: samsung: exynos850: Implement CMU_G3D domain
clk: samsung: clk-pll: Implement pll0818x PLL type
clk: samsung: Set dev in samsung_clk_init()
clk: samsung: Don't pass reg_base to samsung_clk_register_pll()
clk: samsung: Remove np argument from samsung_clk_init()
dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks
dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D
* clk-rockchip:
clk: rockchip: rk3588: make gate linked clocks critical
clk: rockchip: rk3399: allow clk_cifout to force clk_cifout_src to reparent
* clk-qcom: (57 commits)
clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
clk: qcom: add the GPUCC driver for sa8775p
dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
clk: qcom: Add Global Clock Controller driver for IPQ9574
dt-bindings: clock: Add ipq9574 clock and reset definitions
clk: qcom: gpucc-sm6375: Configure CX_GDSC disable wait value
clk: qcom: gcc-sm6115: Mark RCGs shared where applicable
clk: qcom: dispcc-qcm2290: Add MDSS_CORE reset
dt-bindings: clock: dispcc-qcm2290: Add MDSS_CORE reset
clk: qcom: apss-ipq-pll: add support for IPQ5332
dt-bindings: clock: qcom,a53pll: add IPQ5332 compatible
clk: qcom: apss-ipq-pll: refactor the driver to accommodate different PLL types
dt-bindings: mailbox: qcom,apcs-kpss-global: fix SDX55 'if' match
dt-bindings: mailbox: qcom,apcs-kpss-global: correct SDX55 clocks
...
|
|
- Shrink size of clk_fractional_divider a little
- Convert various clk drivers to devm_of_clk_add_hw_provider()
* clk-starfive:
clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
clk: starfive: Avoid casting iomem pointers
MAINTAINERS: generalise StarFive clk/reset entries
reset: starfive: Add StarFive JH7110 reset driver
clk: starfive: Add StarFive JH7110 always-on clock driver
clk: starfive: Add StarFive JH7110 system clock driver
reset: starfive: jh71x0: Use 32bit I/O on 32bit registers
reset: starfive: Rename "jh7100" to "jh71x0" for the common code
reset: starfive: Extract the common JH71X0 reset code
reset: starfive: Factor out common JH71X0 reset code
reset: Create subdirectory for StarFive drivers
reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
clk: starfive: Rename "jh7100" to "jh71x0" for the common code
clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h
clk: starfive: Factor out common JH7100 and JH7110 code
clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
* clk-fractional:
clk: Remove mmask and nmask fields in struct clk_fractional_divider
clk: rockchip: Remove values for mmask and nmask in struct clk_fractional_divider
clk: imx: Remove values for mmask and nmask in struct clk_fractional_divider
clk: Compute masks for fractional_divider clk when needed.
* clk-devmof:
clk: uniphier: Use managed `of_clk_add_hw_provider()`
clk: si5351: Use managed `of_clk_add_hw_provider()`
clk: si570: Use managed `of_clk_add_hw_provider()`
clk: si514: Use managed `of_clk_add_hw_provider()`
clk: lmk04832: Use managed `of_clk_add_hw_provider()`
clk: hsdk-pll: Use managed `of_clk_add_hw_provider()`
clk: cdce706: Use managed `of_clk_add_hw_provider()`
clk: axs10x: Use managed `of_clk_add_hw_provider()`
clk: axm5516: Use managed `of_clk_add_hw_provider()`
clk: axi-clkgen: Use managed `of_clk_add_hw_provider()`
|
|
- BCM63268 timer clock and reset controller
- Convert platform clk drivers to remove_new
* clk-xilinx:
clocking-wizard: Support higher frequency accuracy
clk: zynqmp: pll: Remove the limit
* clk-broadcom:
clk: bcm: Add BCM63268 timer clock and reset driver
dt-bindings: clock: Add BCM63268 timer binding
dt-bindings: reset: add BCM63268 timer reset definitions
dt-bindings: clk: add BCM63268 timer clock definitions
* clk-platform: (25 commits)
clk: xilinx: Convert to platform remove callback returning void
clk: x86: Convert to platform remove callback returning void
clk: uniphier: Convert to platform remove callback returning void
clk: ti: Convert to platform remove callback returning void
clk: tegra: Convert to platform remove callback returning void
clk: stm32: Convert to platform remove callback returning void
clk: mvebu: Convert to platform remove callback returning void
clk: mmp: Convert to platform remove callback returning void
clk: keystone: Convert to platform remove callback returning void
clk: hisilicon: Convert to platform remove callback returning void
clk: stm32mp1: Convert to platform remove callback returning void
clk: scpi: Convert to platform remove callback returning void
clk: s2mps11: Convert to platform remove callback returning void
clk: pwm: Convert to platform remove callback returning void
clk: palmas: Convert to platform remove callback returning void
clk: hsdk-pll: Convert to platform remove callback returning void
clk: fixed-rate: Convert to platform remove callback returning void
clk: fixed-mmio: Convert to platform remove callback returning void
clk: fixed-factor: Convert to platform remove callback returning void
clk: axm5516: Convert to platform remove callback returning void
...
|
|
'clk-socfpga' into clk-next
- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
MT8195 SoCs
- Converted most Mediatek clock drivers to struct platform_driver
- MediaTek clock drivers can be built as modules
- Mediatek MT8188 SoC clk drivers
- Clock driver for Sunplus SP7021 SoC
- Reimplement Loongson-1 clk driver with DT support
- Clk driver support for Loongson-2 SoCs
- Migrate socfpga clk driver to of_clk_add_hw_provider()
* clk-mediatek: (84 commits)
clk: mediatek: fhctl: Mark local variables static
clk: mediatek: Use right match table, include mod_devicetable
clk: mediatek: Add MT8188 adsp clock support
clk: mediatek: Add MT8188 imp i2c wrapper clock support
clk: mediatek: Add MT8188 wpesys clock support
clk: mediatek: Add MT8188 vppsys1 clock support
clk: mediatek: Add MT8188 vppsys0 clock support
clk: mediatek: Add MT8188 vencsys clock support
clk: mediatek: Add MT8188 vdosys1 clock support
clk: mediatek: Add MT8188 vdosys0 clock support
clk: mediatek: Add MT8188 vdecsys clock support
clk: mediatek: Add MT8188 mfgcfg clock support
clk: mediatek: Add MT8188 ipesys clock support
clk: mediatek: Add MT8188 imgsys clock support
clk: mediatek: Add MT8188 ccusys clock support
clk: mediatek: Add MT8188 camsys clock support
clk: mediatek: Add MT8188 infrastructure clock support
clk: mediatek: Add MT8188 peripheral clock support
clk: mediatek: Add MT8188 topckgen clock support
clk: mediatek: Add MT8188 apmixedsys clock support
...
* clk-sunplus:
clk: Add Sunplus SP7021 clock driver
* clk-loongson:
clk: clk-loongson2: add clock controller driver support
dt-bindings: clock: add loongson-2 boot clock index
MAINTAINERS: remove obsolete file entry in MIPS/LOONGSON1 ARCHITECTURE
MIPS: loongson32: Update the clock initialization
clk: loongson1: Re-implement the clock driver
clk: loongson1: Remove the outdated driver
dt-bindings: clock: Add Loongson-1 clock
* clk-socfpga:
clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling
clk: socfpga: use of_clk_add_hw_provider and improve error handling
clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling
clk: socfpga: use of_clk_add_hw_provider and improve error handling
clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling
clk: socfpga: use of_clk_add_hw_provider and improve error handling
|
|
'clk-skyworks' into clk-next
- Support for i3c clks on Aspeed ast2600 SoCs
- Clock driver for Skyworks Si521xx I2C PCIe clock generators
* clk-cleanup:
clk: microchip: fix potential UAF in auxdev release callback
clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
clk: stm32h7: Remove an unused field in struct stm32_fractional_divider
clk: tegra20: fix gcc-7 constant overflow warning
clock: milbeaut: use devm_platform_get_and_ioremap_resource()
clk: Print an info line before disabling unused clocks
clk: ti: Use of_address_to_resource()
clk: remove unnecessary (void*) conversions
clk: at91: clk-sam9x60-pll: fix return value check
clk: visconti: remove unused visconti_pll_provider::regmap
* clk-aspeed:
dt-bindings: clock: ast2600: Expand comment on reset definitions
clk: ast2600: Add comment about combined clock + reset handling
dt-bindings: clock: ast2600: remove IC36 & I3C7 clock definitions
clk: ast2600: Add full configs for I3C clocks
dt-bindings: clock: ast2600: Add top-level I3C clock
clk: ast2600: allow empty entries in aspeed_g6_gates
* clk-dt:
clk: mediatek: clk-pllfh: fix missing of_node_put() in fhctl_parse_dt()
clk: Use of_property_present() for testing DT property presence
* clk-renesas:
clk: renesas: r8a77980: Add I2C5 clock
clk: rs9: Add support for 9FGV0441
clk: rs9: Support device specific dif bit calculation
dt-bindings: clk: rs9: Add 9FGV0441
clk: rs9: Check for vendor/device ID
clk: renesas: Convert to platform remove callback returning void
clk: renesas: r9a06g032: Improve clock tables
clk: renesas: r9a06g032: Document structs
clk: renesas: r9a06g032: Drop unused fields
clk: renesas: r9a06g032: Improve readability
clk: renesas: r8a77980: Add Z2 clock
clk: renesas: r8a77970: Add Z2 clock
clk: renesas: r8a77995: Fix VIN parent clock
clk: renesas: r8a77980: Add VIN clocks
clk: renesas: r8a779g0: Add VIN clocks
clk: renesas: r8a779g0: Add ISPCS clocks
clk: renesas: r8a779g0: Add CSI-2 clocks
clk: renesas: r8a779g0: Add thermal clock
clk: renesas: r8a779g0: Add Audio clocks
clk: renesas: cpg-mssr: Update MSSR register range for R-Car V4H
* clk-skyworks:
clk: si521xx: Clock driver for Skyworks Si521xx I2C PCIe clock generators
dt-bindings: clk: si521xx: Add Skyworks Si521xx I2C PCIe clock generators
|
|
Add the EMAC GDSCs to allow the EMAC hardware to be enabled.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230413191541.1073027-2-ahalaney@redhat.com
|
|
The dev_set_drvdata() is no longer needed after we used a wrapper
struct to get the data in auxiliary driver.
Cc: Xingyu Wu <xingyu.wu@starfivetech.com>
Fixes: d1aae0663023 ("clk: starfive: Avoid casting iomem pointers")
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230417074115.30786-3-hal.feng@starfivetech.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
RK3588 has a couple of hardware blocks called Native Interface Unit
(NIU) that gate the clocks to devices behind them. Effectively this
means that some clocks require two parent clocks being enabled.
Downstream implemented this by using a separate clock driver
("clk-link") for them, which enables the second clock using PM
framework.
In the upstream kernel we are currently missing support for the second
parent. The information about it is in the GATE_LINK() macro as
linkname, but that is not used. Thus the second parent clock is not
properly enabled. So far this did not really matter, since these clocks
are mostly required for the more advanced IP blocks, that are not yet
supported upstream. As this is about to change we need a fix. There
are three options available:
1. Properly implement support for having two parent clocks in the
clock framework.
2. Mark the affected clocks CLK_IGNORE_UNUSED, so that they are not
disabled. This wastes some power, but keeps the hack contained
within the clock driver. Going from this to the first solution
is easy once that has been implemented.
3. Enabling the extra clock in the consumer driver. This leaks some
implementation details into DT.
This patch implements the second option as an intermediate solution
until the first one is available. I used an alias for CLK_IS_CRITICAL,
so that it's easy to see which clocks are not really critical once
the clock framework supports a better way to implement this.
Tested-by: Vincent Legoll <vincent.legoll@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230403193250.108693-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
There's only one DSI PHY on this SoC. Remove the ghost entry for the
clock produced by a secondary one.
Fixes: cc517ea3333f ("clk: qcom: Add display clock controller driver for QCM2290")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230412-topic-qcm_dispcc-v1-2-bf2989a75ae4@linaro.org
|
|
Add the clock driver for the Qualcomm Graphics Clock control module.
Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
[Bartosz: make ready for upstream]
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230411125910.401075-3-brgl@bgdev.pl
|
|
On SM8350 platform the PCIe PIPE clocks require additional handling to
function correctly. They are to be switched to the tcxo source before
turning PCIe GDSCs off and should be switched to PHY PIPE source once
they are working. Switch PCIe PHY clocks to use clk_regmap_phy_mux_ops,
which provide support for this dance.
Fixes: 44c20c9ed37f ("clk: qcom: gcc: Add clock driver for SM8350")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230412134829.3686467-1-dmitry.baryshkov@linaro.org
|
|
lpass_cc_sc7280_desc
Add GDSCs in lpass_cc_sc7280_desc struct.
When qcom,adsp-pil-mode is enabled, GDSCs required to solve
dependencies in lpass_audiocc probe().
Fixes: 0cbcfbe50cbf ("clk: qcom: lpass: Handle the regmap overlap of lpasscc and lpass_aon")
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407092255.119690-4-quic_mohs@quicinc.com
|
|
The qdsp6ss memory region is being shared by ADSP remoteproc device and
lpasscc clock device, hence causing memory conflict.
To avoid this, when qdsp6ss clocks are being enabled in remoteproc driver,
skip qdsp6ss clock registration if "qcom,adsp-pil-mode" is enabled and
also assign max_register value.
Fixes: 4ab43d171181 ("clk: qcom: Add lpass clock controller driver for SC7280")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407092255.119690-3-quic_mohs@quicinc.com
|
|
Let's use a wrapper struct for the auxiliary_device made in
jh7110_reset_controller_register() so that we can stop casting iomem
pointers. The casts trip up tools like sparse, and make for some awkward
casts that are largely unnecessary. While we're here, change the
allocation from devm and actually free the auxiliary_device memory in
the release function. This avoids any use after free problems where the
parent device driver is unbound from the device but the
auxiliuary_device is still in use accessing devm freed memory.
Cc: Tommaso Merciai <tomm.merciai@gmail.com>
Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Hal Feng <hal.feng@starfivetech.com>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Xingyu Wu <xingyu.wu@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: edab7204afe5 ("clk: starfive: Add StarFive JH7110 system clock driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20230413205528.4044216-1-sboyd@kernel.org
|
|
Similar to commit 1c11289b34ab ("peci: cpu: Fix use-after-free in
adev_release()"), the auxiliary device is not torn down in the correct
order. If auxiliary_device_add() fails, the release callback will be
called twice, resulting in a UAF. Due to timing, the auxdev code in this
driver "took inspiration" from the aforementioned commit, and thus its
bugs too!
Moving auxiliary_device_uninit() to the unregister callback instead
avoids the issue.
CC: stable@vger.kernel.org
Fixes: b56bae2dd6fd ("clk: microchip: mpfs: add reset controller")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230413-critter-synopsis-dac070a86cb4@spud
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Daire McNamara <daire.mcnamara@microchip.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-riscv@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Use the managed `devm_of_clk_add_hw_provider()` instead of
`of_clk_add_hw_provider()`.
This makes sure the provider gets automatically removed on unbind and
allows to completely eliminate the drivers `remove()` callback.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230410014502.27929-7-lars@metafoo.de
|
|
smatch reports
drivers/clk/mediatek/clk-fhctl.c:17:27: warning: symbol
'fhctl_offset_v1' was not declared. Should it be static?
drivers/clk/mediatek/clk-fhctl.c:30:27: warning: symbol
'fhctl_offset_v2' was not declared. Should it be static?
These variables are only used in one file so should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230406010935.1944976-1-trix@redhat.com
Fixes: 8da312d6574c ("clk: mediatek: fhctl: Add support for older fhctl register layout")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the
use of such symbols on other architectures, convert the SiFive clk
drivers to use the new symbol.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230406-groovy-trustable-15853ac0a130@spud
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use the managed `devm_of_clk_add_hw_provider()` instead of
`of_clk_add_hw_provider()`.
This makes sure the provider gets automatically removed on unbind and
allows to completely eliminate the drivers `remove()` callback.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230410014502.27929-11-lars@metafoo.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use the managed `devm_of_clk_add_hw_provider()` instead of
`of_clk_add_hw_provider()`.
This makes sure the provider gets automatically removed on unbind and
allows to completely eliminate the drivers `remove()` callback.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230410014502.27929-10-lars@metafoo.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use the managed `devm_of_clk_add_hw_provider()` instead of
`of_clk_add_hw_provider()`.
This makes sure the provider gets automatically removed on unbind and
allows to completely eliminate the drivers `remove()` callback.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230410014502.27929-9-lars@metafoo.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use the managed `devm_of_clk_add_hw_provider()` instead of
`of_clk_add_hw_provider()`. This makes sure the provider gets automatically
removed on unbind and allows to completely eliminate the drivers `remove()`
callback.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230410014502.27929-8-lars@metafoo.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use the managed `devm_of_clk_add_hw_provider()` instead of
`of_clk_add_hw_provider()`.
This makes sure the provider gets automatically removed on unbind.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230410014502.27929-6-lars@metafoo.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use the managed `devm_of_clk_add_hw_provider()` instead of
`of_clk_add_hw_provider()`.
This makes sure the provider gets automatically removed on unbind and
allows to completely eliminate the drivers `remove()` callback.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230410014502.27929-5-lars@metafoo.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use the managed `devm_of_clk_add_hw_provider()` instead of
`of_clk_add_hw_provider()`.
This makes sure the provider gets automatically removed on unbind and
allows to completely eliminate the drivers `remove()` callback.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230410014502.27929-4-lars@metafoo.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use the managed `devm_of_clk_add_hw_provider()` instead of
`of_clk_add_hw_provider()`. This makes sure the provider gets automatically
removed on unbind and allows to completely eliminate the drivers `remove()`
callback.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230410014502.27929-3-lars@metafoo.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use the managed `devm_of_clk_add_hw_provider()` instead of
`of_clk_add_hw_provider()`.
This makes sure the provider gets automatically removed on unbind and
allows to completely eliminate the drivers `remove()` callback.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230410014502.27929-2-lars@metafoo.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use the managed `devm_of_clk_add_hw_provider()` instead of
`of_clk_add_hw_provider()`. This makes sure the provider gets automatically
removed on unbind and allows to completely eliminate the drivers `remove()`
callback.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230410014502.27929-1-lars@metafoo.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas
Pull one more Renesas clk driver update from Geert Uytterhoeven:
- Add I2C5 clock on R-Car V3H
* tag 'renesas-clk-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: r8a77980: Add I2C5 clock
|
|
In order to support bus fabric clock frequency changed on the fly,
need to update some bus clocks'flags to make sure these clocks'frequency
and parent can be changed on the fly. For these clocks, HW can make sure
no glitch will be introduced when changing on the fly.
In order to support DDR DFS, the HW register bit for DDR_SEL
and DDR_DIV clock will be modified by TF-A. So need to update
these two clock's flag to make sure that the linux kernel side
can correct these clocks' SW state to reflect the actual HW state.
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230331063814.2462059-6-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
The TPM5 is used for broadcast timer purpose and registered
with TIMER_OF_DECLARE. As the clock driver is not ready at
that stage, so the TPM5 clock is configured in bootloader(TF-A).
if we just remove the TPM5 clock from linux will introduce a
risk that the TPM5's parent clock will be gated, then lead to
TPM's channel control config can NOT be written into register
successfully.
Due to the above reason, we still need to add the TPM5 clock
into linux clock but register it as a simple critical gate
clock to make sure its parent is always on.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230331063814.2462059-5-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
Keep the A35<->M33 MU0_B clock enabled always for low power
communication.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230331063814.2462059-4-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
If a divider's parent clock has fractional part, it will hard to round out a
more accurate clock rate for this divider, add the 'CLK_DIVIDER_ROUND_CLOSEST' flags
for such divider to get a more accurate clock rate.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230331063814.2462059-3-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
XBAR_DIVBUS and AD_SLOW should set parent to XBAR_AD_DIVPLAT and
XBAR_DIVBUS respectively, not the NIC_AD. otherwise we will get
wrong clock rate.
Fixes: c43a801a5789 ("clk: imx: Add clock driver for imx8ulp")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230331063814.2462059-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
The A55 clock logic as below:
A55_PLL ----------------->\
A55_SEL-->A55_CORE
A55_CCM_ROOT--->A55_GATE->/
Add A55 CPU clk to support freq change.
Add NIC CLK to reflect the clk status
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230403095300.3386988-8-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
Add mcore_booted boot parameter which could simplify AMP clock
management. To i.MX93, there is CCM(clock control Module) to generate
clock root clock, anatop(analog PLL module) to generate PLL, and LPCG
(clock gating) to gate clocks to peripherals. As below:
anatop->ccm->lpcg->peripheral
Linux handles the clock management and the auxiliary core is under
control of Linux. Although there is per hardware domain control for LPCG
and CCM, auxiliary core normally only use LPCG hardware domain control
to avoid linux gate off the clk to peripherals and leave CCM ana anatop
to Linux.
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230403095300.3386988-6-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
Add 300MHz frequency config support on i.MX93 PLL.
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230403095300.3386988-5-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
The fracn gppll could be configured in FRAC or INTEGER mode during
hardware design. The current driver only support FRAC mode, while
this patch introduces INTEGER support. When the PLL is INTEGER pll,
there is no mfn, mfd, the calculation is as below:
Fvco_clk = (Fref / DIV[RDIV] ) * DIV[MFI]
Fclko_odiv = Fvco_clk / DIV[ODIV]
In this patch, we reuse the FRAC pll logic with some condition check to
simplify the driver
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230403095300.3386988-4-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
When programming PLL, should disable Hardware control select to make PLL
controlled by register, not hardware inputs through OSCPLL.
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230403095300.3386988-3-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
The Fvco should be range 2.4GHz to 5GHz, the original table voilate the
spec, so update the table to fix it.
Fixes: c196175acdd3 ("clk: imx: clk-fracn-gppll: Add more freq config for video pll")
Fixes: 044034efbeea ("clk: imx: clk-fracn-gppll: fix mfd value")
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230403095300.3386988-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
