summaryrefslogtreecommitdiff
path: root/drivers/clocksource/Makefile
AgeCommit message (Collapse)Author
2019-03-06Merge tag 'armsoc-newsoc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM new SoC family support from Arnd Bergmann: "Two new SoC families are added this time. Sugaya Taichi submitted support for the Milbeaut SoC family from Socionext and explains: "SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for computer vision. It also features advanced functionalities such as 360-degree, real-time spherical stitching with multi cameras, image stabilization for without mechanical gimbals, and rolling shutter correction. More detail is below: https://www.socionext.com/en/products/assp/milbeaut/SC2000.html" Interestingly, this one has a history dating back to older chips made by Socionext and previously Matsushita/Panasonic based on their own mn10300 CPU architecture that was removed from the kernel last year. Manivannan Sadhasivam adds support for another SoC family, this is the Bitmain BM1880 chip used in the Sophon Edge TPU developer board. The chip is intended for Deep Learning applications, and comes with dual-core Arm Cortex-A53 to run Linux as well as a RISC-V microcontroller core to control the tensor unit. For the moment, the TPU is not accessible in mainline Linux, so we treat it as a generic Arm SoC. More information is available at https://www.sophon.ai/" * tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V ARM: configs: Add Milbeaut M10V defconfig ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs dt-bindings: timer: Add Milbeaut M10V timer description ARM: milbeaut: Add basic support for Milbeaut m10v SoC dt-bindings: Add documentation for Milbeaut SoCs dt-bindings: arm: Add SMP enable-method for Milbeaut dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram MAINTAINERS: Add entry for Bitmain SoC platform arm64: dts: bitmain: Add Sophon Egde board support arm64: dts: bitmain: Add BM1880 SoC support arm64: Add ARCH_BITMAIN platform dt-bindings: arm: Document Bitmain BM1880 SoC
2019-03-01clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCsSugaya Taichi
Add timer driver for Milbeaut SoCs series. The timer has two 32-bit width down counters, one of which is configured as a clockevent device and the other is configured as a clock source. Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-23clocksource/drivers/timer-cs5535: Rename the file for consistencyDaniel Lezcano
For the sake of consistency, let's rename the file to a name similar to other file names in this directory. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-02-23clocksource/drivers/timer-pxa: Rename the file for consistencyDaniel Lezcano
For the sake of consistency, let's rename the file to a name similar to other file names in this directory. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-02-23clocksource/drivers/tango-xtal: Rename the file for consistencyDaniel Lezcano
For the sake of consistency, let's rename the file to a name similar to other file names in this directory. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-12-18clocksource/drivers/rda: Add clock driver for RDA8810PL SoCManivannan Sadhasivam
Add clock driver for RDA Micro RDA8810PL SoC supporting OSTIMER and HWTIMER. RDA8810PL has two independent timers: OSTIMER (56 bit) and HWTIMER (64 bit). Each timer provides optional interrupt support. In this driver, OSTIMER is used for clockevents and HWTIMER is used for clocksource. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-12-18clocksource/drivers/meson6: Change name meson6_timer timer-meson6Daniel Lezcano
In order to unify the names in this directory, let's rename the driver to be prefixed with timer-* Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-12-18clocksource/drivers/sun4i: Change name sun4i_timer to timer-sun4iDaniel Lezcano
In order to unify the names in this directory, let's rename the driver to be prefixed with timer-* Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-12-18clocksource/drivers/tegra20: Change name tegra20_timer to timer-tegra20Daniel Lezcano
In order to unify the names in this directory, let's rename the driver to be prefixed with timer-* Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-12-18clocksource/drivers/rockchip: Change name rockchip_timer to timer-rockchipDaniel Lezcano
In order to unify the names in this directory, let's rename the driver to be prefixed with timer-* Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-12-18clocksource/drivers/riscv: Change name riscv_timer to timer-riscvDaniel Lezcano
In order to unify the names in this directory, let's rename the driver to be prefixed with timer-* Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-11-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more timer updates from Thomas Gleixner: "A set of commits for the new C-SKY architecture timers" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: timer: gx6605s SOC timer clocksource/drivers/c-sky: Add gx6605s SOC system timer dt-bindings: timer: C-SKY Multi-processor timer clocksource/drivers/c-sky: Add C-SKY SMP timer
2018-11-02clocksource/drivers/c-sky: Add gx6605s SOC system timerGuo Ren
The driver is for gx6605s SOC system timer and there are two same timers in gx6605s. We use one for clkevt and another one for clksrc. The timer is mmio map to access, so we need give mmio address in dts. The counter at 0x0 offset is clock event. The counter at 0x40 offset is clock source. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-11-02clocksource/drivers/c-sky: Add C-SKY SMP timerGuo Ren
The driver is for C-SKY SMP timer. It only supports oneshot event and 32bit overflow for clocksource. Per cpu core has one timer and all timers share one clock-counter-input from the same clocksource. This use mfcr&mtcr instructions to access the regs. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-10-03clocksource/drivers: Unify the names to timer-* formatDaniel Lezcano
In order to make some housekeeping in the directory, this patch renames drivers to the timer-* format in order to unify their names. There is no functional changes. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-08-19Merge tag 'riscv-for-linus-4.19-mw0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This contains some major improvements to the RISC-V port, including the necessary interrupt controller and timer support to actually make it to userspace. Support for three devices has been added: - the ISA-mandated timers on RISC-V systems. - the ISA-mandated first-level interrupt controller on RISC-V systems, which is handled as part of our core arch code because it's very small and tightly tied to the ISA. - SiFive's platform-level interrupt controller, which talks to the actual devices. In addition to these new devices, there are a handful of cleanups all over the RISC-V tree: - build fixes for various configurations: * A fix to the vDSO build's makefile so it respects CFLAGS. * The addition of __lshrti3, a libgcc derived function necessary for some 32-bit configurations. * !SMP && PERF_EVENTS - Cleanups to the arch code to remove the remnants of old versions of the drivers that were just properly submitted. * Some dead code from the timer driver, most of which wasn't ever even compiled. * Cleanups of some interrupt #defines, which are now local to the interrupt handling code. - Fixes to ptrace(), which while not being sufficient to fully make GDB work are at least sufficient to get simple GDB tasks to work. - Early printk support via RISC-V's architecturally mandated SBI console device. - A fix to our early debug trap handler to ensure it's always aligned. These patches have all been through a fairly extensive review process, but as this enables a whole pile of functionality (ie, userspace) I'm confident we'll need to submit a few more patches. The only concrete issues I know about are the sys_riscv_flush_icache patches, but as I managed to screw those up on Friday I figured it'd be best to let them bake another week. This tag boots a Fedora root filesystem on QEMU's master branch for me, and before this morning's rebase (from 4.18-rc8 to 4.18) it booted on the HiFive Unleashed. Thanks to Christoph Hellwig and the other guys at WD for getting the new drivers in shape!" * tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller dt-bindings: interrupt-controller: RISC-V local interrupt controller RISC-V: Fix !CONFIG_SMP compilation error irqchip: add a SiFive PLIC driver RISC-V: Add the directive for alignment of stvec's value clocksource: new RISC-V SBI timer driver RISC-V: implement low-level interrupt handling RISC-V: add a definition for the SIE SEIE bit RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.h RISC-V: simplify software interrupt / IPI code RISC-V: remove timer leftovers RISC-V: Add early printk support via the SBI console RISC-V: Don't increment sepc after breakpoint. RISC-V: implement __lshrti3. RISC-V: Use KBUILD_CFLAGS instead of KCFLAGS when building the vDSO
2018-08-13clocksource: new RISC-V SBI timer driverPalmer Dabbelt
The RISC-V ISA defines a per-hart real-time clock and timer, which is present on all systems. The clock is accessed via the 'rdtime' pseudo-instruction (which reads a CSR), and the timer is set via an SBI call. Contains various improvements from Atish Patra <atish.patra@wdc.com>. Signed-off-by: Dmitriy Cherkasov <dmitriy@oss-tech.org> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> [hch: remove dead code, add SPDX tags, used riscv_of_processor_hart(), minor cleanups, merged hotplug cpu support and other improvements from Atish] Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-26clocksource/drivers/timer-mediatek: Rename mtk_timer to timer-mediatekStanley Chu
Rename mtk_timer to timer-mediatek to apply new naming convention in clocksource folder. Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-04-16Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull missed timer updates from Thomas Gleixner: "This is a branch which got forgotten during the merge window, but it contains only fixes and hardware enablement. No fundamental changes. - Various fixes for the imx-tpm clocksource driver - A new timer driver for the NCPM7xx SoC family" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/imx-tpm: Add different counter width support clocksource/drivers/imx-tpm: Correct some registers operation flow clocksource/drivers/imx-tpm: Fix typo of clock name dt-bindings: timer: tpm: fix typo of clock name clocksource/drivers/npcm: Add NPCM7xx timer driver dt-binding: timer: document NPCM7xx timer DT bindings
2018-04-05Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits) arm: npcm: modify configuration for the NPCM7xx BMC. MAINTAINERS: update entry for ARM/berlin ARM: omap2: fix am43xx build without L2X0 ARM: davinci: da8xx: simplify CFGCHIP regmap_config ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data ARM: multi_v7_defconfig: add NXP FlexCAN IP support ARM: multi_v7_defconfig: enable thermal driver for i.MX devices ARM: multi_v7_defconfig: add RN5T618 PMIC family support ARM: multi_v7_defconfig: add NXP graphics drivers ARM: multi_v7_defconfig: add GPMI NAND controller support ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs ARM: multi_v7_defconfig: configure I2C driver built-in arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE ARM: imx: fix imx6sll-only build ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver ARM: imx_v4_v5_defconfig: Re-sync defconfig arm64: defconfig: enable stmmac ethernet to defconfig ARM: EXYNOS: Simplify code in coupled CPU idle hot path ...
2018-04-02Merge tag 'arch-removal' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pul removal of obsolete architecture ports from Arnd Bergmann: "This removes the entire architecture code for blackfin, cris, frv, m32r, metag, mn10300, score, and tile, including the associated device drivers. I have been working with the (former) maintainers for each one to ensure that my interpretation was right and the code is definitely unused in mainline kernels. Many had fond memories of working on the respective ports to start with and getting them included in upstream, but also saw no point in keeping the port alive without any users. In the end, it seems that while the eight architectures are extremely different, they all suffered the same fate: There was one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem, which was more costly than licensing newer off-the-shelf CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems that all the SoC product lines are still around, but have not used the custom CPU architectures for several years at this point. In contrast, CPU instruction sets that remain popular and have actively maintained kernel ports tend to all be used across multiple licensees. [ See the new nds32 port merged in the previous commit for the next generation of "one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem" - Linus ] The removal came out of a discussion that is now documented at https://lwn.net/Articles/748074/. Unlike the original plans, I'm not marking any ports as deprecated but remove them all at once after I made sure that they are all unused. Some architectures (notably tile, mn10300, and blackfin) are still being shipped in products with old kernels, but those products will never be updated to newer kernel releases. After this series, we still have a few architectures without mainline gcc support: - unicore32 and hexagon both have very outdated gcc releases, but the maintainers promised to work on providing something newer. At least in case of hexagon, this will only be llvm, not gcc. - openrisc, risc-v and nds32 are still in the process of finishing their support or getting it added to mainline gcc in the first place. They all have patched gcc-7.3 ports that work to some degree, but complete upstream support won't happen before gcc-8.1. Csky posted their first kernel patch set last week, their situation will be similar [ Palmer Dabbelt points out that RISC-V support is in mainline gcc since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]" This really says it all: 2498 files changed, 95 insertions(+), 467668 deletions(-) * tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits) MAINTAINERS: UNICORE32: Change email account staging: iio: remove iio-trig-bfin-timer driver tty: hvc: remove tile driver tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers serial: remove tile uart driver serial: remove m32r_sio driver serial: remove blackfin drivers serial: remove cris/etrax uart drivers usb: Remove Blackfin references in USB support usb: isp1362: remove blackfin arch glue usb: musb: remove blackfin port usb: host: remove tilegx platform glue pwm: remove pwm-bfin driver i2c: remove bfin-twi driver spi: remove blackfin related host drivers watchdog: remove bfin_wdt driver can: remove bfin_can driver mmc: remove bfin_sdh driver input: misc: remove blackfin rotary driver input: keyboard: remove bf54x driver ...
2018-03-30clocksource/drivers/npcm: Add NPCM7xx timer driverTomer Maimon
Add Nuvoton BMC NPCM7xx timer driver. The clocksource Enable 24-bit TIMER0 and TIMER1 counters, while TIMER0 serve as clockevent and TIMER1 serve as clocksource. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Brendan Higgins <brendanhiggins@xxxxxxxxxx> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-02-23clocksource: Remove metag generic timer driverJames Hogan
Now that arch/metag/ has been removed, remove the metag generic per-thread timer driver. It is of no value without the architecture code. Signed-off-by: James Hogan <jhogan@kernel.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-metag@vger.kernel.org
2018-02-22ARM: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksourceKeerthy
Move the dmtimer driver out of plat-omap to clocksource. So that non-omap devices also could use this. No Code changes done to the driver file only renamed to timer-ti-dm.c. Also removed the config dependencies for OMAP_DM_TIMER. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Tested-by: Ladislav Michl <ladis@linux-mips.org> [tony@atomide.com: add select omap_dm_timer for omap16xx] Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-22clocksource/drivers/atcpit100: Add andestech atcpit100 timerRick Chen
ATCPIT100 is often used on the Andes architecture, This timer provide 4 PIT channels. Each PIT channel is a multi-function timer, can be configured as 32,16,8 bit timers or PWM as well. For system timer it will set channel 1 32-bit timer0 as clock source and count downwards until underflow and restart again. It also set channel 0 32-bit timer0 as clock event and count downwards until condition match. It will generate an interrupt for handling periodically. Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Add andestech atcpit100 timer
2018-01-08clocksource/drivers/spreadtrum: Add timer driver for the Spreadtrum SC9860 ↵Baolin Wang
platform The Spreadtrum SC9860 platform will use the architected timers as local clock events, but we also need a broadcast timer device to wake up the CPUs when the CPUs are in sleep mode. The Spreadtrum timer can support 32-bit or 64-bit counters, as well as supporting period mode or one-shot mode. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1515418139-23276-8-git-send-email-daniel.lezcano@linaro.org [ Minor readability edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-29clocksource/drivers/imx-tpm: Add imx tpm timer supportDong Aisheng
IMX Timer/PWM Module (TPM) supports both timer and pwm function while this patch only adds the timer support. PWM would be added later. The TPM counter, compare and capture registers are clocked by an asynchronous clock that can remain enabled in low power modes. NOTE: We observed in a very small probability, the bus fabric contention between GPU and A7 may results a few cycles delay of writing CNT registers which may cause the min_delta event got missed, so we need add a ETIME check here in case it happened. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-07-04Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "New SoC specific drivers: - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later) based on the "BPMP" firmware - Clocksource and system controller drivers for the newly added Action Semi platforms (both arm and arm64). Reset subsystem, merged through arm-soc by tradition: - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini SoCs - Various subsystem-wide cleanups Updates for existing SoC-specific drivers - TI GPMC (General Purpose Memory Controller) - Mediatek "scpsys" system controller support for MT6797 - Broadcom "brcmstb_gisb" bus arbitrer - ARM SCPI firmware - Renesas "SYSC" system controller One more driver update was submitted for the Freescale/NXP DPAA data path acceleration that has previously been used on PowerPC chips. I ended up postponing the merge until some API questions for its unusual MMIO access are resolved" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) clocksource: owl: Add S900 support clocksource: Add Owl timer soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON firmware: tegra: Fix locking bugs in BPMP soc/tegra: flowctrl: Fix error handling soc/tegra: bpmp: Implement generic PM domains soc/tegra: bpmp: Update ABI header PM / Domains: Allow overriding the ->xlate() callback soc: brcmstb: enable drivers for ARM64 and BMIPS soc: renesas: Rework Kconfig and Makefile logic reset: Add the TI SCI reset driver dt-bindings: reset: Add TI SCI reset binding reset: use kref for reference counting soc: qcom: smsm: Improve error handling, quiesce probe deferral cpufreq: scpi: use new scpi_ops functions to remove duplicate code firmware: arm_scpi: add support to populate OPPs and get transition latency dt-bindings: reset: Add reset manager offsets for Stratix10 memory: omap-gpmc: add error message if bank-width property is absent memory: omap-gpmc: make dts snippet include semicolon reset: Add a Gemini reset controller ...
2017-06-18clocksource: Add Owl timerAndreas Färber
The Actions Semi S500 SoC provides four timers, 2Hz0/1 and 32-bit TIMER0/1. Use TIMER0 as clocksource and TIMER1 as clockevents. Based on LeMaker linux-actions tree. An S500 datasheet can be found on the LeMaker Guitar pages: http://www.lemaker.org/product-guitar-download-29.html Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-06-14clocksource/drivers: Add timer-of common init routineDaniel Lezcano
The different drivers are all using the same pattern when initializing. 1. Get the base address 2. Get the irq number 3. Get the clock 4. Prepare and enable the clock 5. Get the rate 6. Request an interrupt Instead of repeating again and again these steps in all the drivers, let's provide a common init routine to give the opportunity to factor all of them out. We can expect a significant kernel size improvement when the common routine will be used in all the drivers. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-14clocksource/drivers: Rename CLKSRC_OF to TIMER_OFDaniel Lezcano
The config option name is now renamed to 'TIMER_OF' for consistency with the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-12Revert "clockevents: Add a clkevt-of mechanism like clksrc-of"Daniel Lezcano
After discussing it, this feature is dropped as it is not considered adequate: https://patchwork.kernel.org/patch/9639317/ There is no user of this macro yet, so there is no impact on the drivers. This reverts commit 376bc27150f180d9f5eddec6a14117780177589d. Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-12clocksource/drivers/fttmr010: Merge Moxa into FTTMR010Linus Walleij
This merges the Moxa Art timer driver into the Faraday FTTMR010 driver and replaces all Kconfig symbols to use the Faraday driver instead. We are now so similar that the drivers can be merged by just adding a few lines to the Faraday timer. Differences: - The Faraday driver explicitly sets the counter to count upwards for the clocksource, removing the need for the clocksource core to invert the value. - The Faraday driver also handles sched_clock() On the Aspeed, the counter can only count downwards, so support the timers in downward-counting mode as well, and flag the Aspeed to use this mode. This mode was tested on the Gemini so I have high hopes that it'll work fine on the Aspeed as well. After this we have one driver for all three SoCs and a generic Faraday FTTMR010 timer driver, which is nice. Cc: Joel Stanley <joel@jms.id.au> Cc: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-04-07clocksource/drivers/gemini: Rename Gemini timer to FaradayLinus Walleij
After some research it turns out that the "Gemini" timer is actually a generic IP block from Faraday Technology named FTTMR010, so as to not make things too confusing we need to rename the driver and its symbols to make sense. The implementation remains the same in this patch but we fix the copy-paste error in the timer name "nomadik_mtu" as we're at it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-02-07clocksource/drivers/ostm: Add renesas-ostm timer driverChris Brandt
This patch adds a OSTM driver for the Renesas architecture. The OS Timer (OSTM) has independent channels that can be used as a freerun or interval times. This driver uses the first probed device as a clocksource and then any additional devices as clock events. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-02-07clocksource/drivers/gemini: Add driver for the Cortina GeminiLinus Walleij
This is a rewrite of the Gemini timer driver in arch/arm/mach-gemini/timer.c trying to do everything the device tree way: - Make every IO-access relative to a base address and dynamic so we can do a dynamic ioremap and get going. - Do not poke around directly in the global syscon registers, access them using the syscon regmap style design pattern for the one register we need to check. - Find register range and interrupt from the device tree. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-02-07clockevents: Add a clkevt-of mechanism like clksrc-ofDaniel Lezcano
The current code uses the CLOCKSOURCE_OF_DECLARE macro to fill the clksrc table with a t-uple (name, init_function). Unfortunately it ends up to the clockevent and the clocksource being both initialized with this macro. It is not a problem by itself but there is not a clear distinction between a clockevent and a clocksource in the code initialization path. Somebody can argue there are the same IP block and the same DT node. But conceptually from the software side, there are two distincts entities and as is they should be initialized separetely. Some drivers which do not have a clocksource end up by using the CLOCKSOURCE_OF_DECLARE macro to declare a clockevent. Another result is the fuzzy organization in the clocksource directory, where the clockevents are implemented in the same file than the clocksources or file labelled timer-something implementing a clocksource. This patch provides another macro to specifically declare a clockevent in the same way than the clocksource and gives the opportunity to write two separate drivers, one for the clocksource and another for the clockevents. Hopefully, that can help to do some housework in the directory, perhaps split the drivers in to entities, for example: - clksrc-rockchip.c - clkevt-rockchip.c Also, it gives the possibility to declare clocksources separately in the DT and then use a clocksource from IP block while while clockevents are used from another IP block. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-11-30clocksource: import ARC timer driverVineet Gupta
This adds support for - CONFIG_ARC_TIMERS : legacy 32-bit TIMER0 and TIMER1 which count UP from @CNT to @LIMIT, before optionally triggering an interrupt. These are programmed using ARC auxiliary register interface. These are present in all ARC cores (ARC700 and ARC HS38) TIMER0 serves as clockevent for all ARC linux builds. TIMER1 is used for clocksource in arc700 builds. - CONFIG_ARC_TIMERS_64BIT: 64-bit counters, RTC and GFRC found in ARC HS38 cores. These are independnet IP blocks with different programming model respectively. Link: http://lkml.kernel.org/r/20161111231132.GA4186@mai Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-20clocksource: Add J-Core timer/clocksource driverRich Felker
At the hardware level, the J-Core PIT is integrated with the interrupt controller, but it is represented as its own device and has an independent programming interface. It provides a 12-bit countdown timer, which is not presently used, and a periodic timer. The interval length for the latter is programmable via a 32-bit throttle register whose units are determined by a bus-period register. The periodic timer is used to implement both periodic and oneshot clock event modes; in oneshot mode the interrupt handler simply disables the timer as soon as it fires. Despite its device tree node representing an interrupt for the PIT, the actual irq generated is programmable, not hard-wired. The driver is responsible for programming the PIT to generate the hardware irq number that the DT assigns to it. On SMP configurations, J-Core provides cpu-local instances of the PIT; no broadcast timer is needed. This driver supports the creation of the necessary per-cpu clock_event_device instances. A nanosecond-resolution clocksource is provided using the J-Core "RTC" registers, which give a 64-bit seconds count and 32-bit nanoseconds that wrap every second. The driver converts these to a full-range 32-bit nanoseconds count. Signed-off-by: Rich Felker <dalias@libc.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Link: http://lkml.kernel.org/r/b591ff12cc5ebf63d1edc98da26046f95a233814.1476393790.git.dalias@libc.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-06-28clocksource/drivers/integrator-ap: Add the COMPILE_TEST optionDaniel Lezcano
Change the Kconfig option logic to fullfil with the current approach. A new Kconfig option is added, CONFIG_INTEGRATOR_AP_TIMER and is selected by the platform. Then the clocksource's Kconfig is changed to make this option selectable by the user if the COMPILE_TEST option is set. Otherwise, it is up to the platform's Kconfig to select the timer. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-28clocksource/drivers/keystone: Add the COMPILE_TEST optionDaniel Lezcano
Change the Kconfig option logic to fullfil with the current approach. A new Kconfig option is added, CONFIG_KEYSTONE_TIMER and is selected by the platform. Then the clocksource's Kconfig is changed to make this option selectable by the user if the COMPILE_TEST option is set. Otherwise, it is up to the platform's Kconfig to select the timer. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-28clocksource/drivers/nspire: Add the COMPILE_TEST optionDaniel Lezcano
Change the Kconfig option logic to fullfil with the current approach. A new Kconfig option is added, CONFIG_NSPIRE_TIMER and is selected by the platform. Then the clocksource's Kconfig is changed to make this option selectable by the user if the COMPILE_TEST option is set. Otherwise, it is up to the platform's Kconfig to select the timer. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-28clocksource/drivers/u300: Add the COMPILE_TEST optionDaniel Lezcano
Change the Kconfig option logic to fullfil with the current approach. A new Kconfig option is added, CONFIG_U300_TIMER and is selected by the platform. Then the clocksource's Kconfig is changed to make this option selectable by the user if the COMPILE_TEST option is set. Otherwise, it is up to the platform's Kconfig to select the timer. Due on the delay specific code, this driver will compile only on the ARM architecture. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-28clocksource/drivers/prima2: Add the COMPILE_TEST optionDaniel Lezcano
Change the Kconfig option logic to fullfil with the current approach. A new Kconfig option is added, CONFIG_PRIMA2_TIMER and is selected by the platform. Then the clocksource's Kconfig is changed to make this option selectable by the user if the COMPILE_TEST option is set. Otherwise, it is up to the platform's Kconfig to select the timer. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-28clocksource/drivers/mxs: Add the COMPILE_TEST optionDaniel Lezcano
Change the Kconfig option logic to fullfil with the current approach. A new Kconfig option is added, CONFIG_MXS_TIMER and is selected by the platform. Then the clocksource's Kconfig is changed to make this option selectable by the user if the COMPILE_TEST option is set. Otherwise, it is up to the platform's Kconfig to select the timer. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-28clocksource/drivers/moxart: Add the COMPILE_TEST optionDaniel Lezcano
Change the Kconfig option logic to fullfil with the current approach. A new Kconfig option is added, CONFIG_MOXART_TIMER and is selected by the platform. Then the clocksource's Kconfig is changed to make this option selectable by the user if the COMPILE_TEST option is set. Otherwise, it is up to the platform's Kconfig to select the timer. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-28clocksource/drivers/atlas7: Add the COMPILE_TEST optionDaniel Lezcano
Change the Kconfig option logic to fullfil with the current approach. A new Kconfig option is added, CONFIG_ATLAS7_TIMER and is selected by the platform. Then the clocksource's Kconfig is changed to make this option selectable by the user if the COMPILE_TEST option is set. Otherwise, it is up to the platform's Kconfig to select the timer. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-28clocksource/drivers/clps_711x: Add the COMPILE_TEST optionDaniel Lezcano
Change the Kconfig option logic to fullfil with the current approach. A new Kconfig option is added, CONFIG_CLPS711X_TIMER and is selected by the platform. Then the clocksource's Kconfig is changed to make this option selectable by the user if the COMPILE_TEST option is set. Otherwise, it is up to the platform's Kconfig to select the timer. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-28clocksource/drivers/bcm_kona: Add the COMPILE_TEST optionDaniel Lezcano
Change the Kconfig option logic to fullfil with the current approach. A new Kconfig option is added, CONFIG_BCM_KONA_TIMER and is selected by the platform. Then the clocksource's Kconfig is changed to make this option selectable by the user if the COMPILE_TEST option is set. Otherwise, it is up to the platform's Kconfig to select the timer. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>