summaryrefslogtreecommitdiff
path: root/drivers/counter
AgeCommit message (Collapse)Author
2023-10-02Merge tag 'counter-fixes-for-6.6a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus William writes: First set of Counter fixes for 6.6 The counter_get_ext() function would incorrectly refer to the first element of the extensions array to handle component array extensions when they are located at a different index; a fix is provided to index to the correct element in the array for this case. A fix for the microchip-tcb-capture is provided as well to correct an inverted internal GCLK logic for clock selection. * tag 'counter-fixes-for-6.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: microchip-tcb-capture: Fix the use of internal GCLK logic counter: chrdev: fix getting array extensions
2023-09-05counter: microchip-tcb-capture: Fix the use of internal GCLK logicDharma Balasubiramani
As per the datasheet, the clock selection Bits 2:0 – TCCLKS[2:0] should be set to 0 while using the internal GCLK (TIMER_CLOCK1). Fixes: 106b104137fd ("counter: Add microchip TCB capture counter") Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com> Link: https://lore.kernel.org/r/20230905100835.315024-1-dharma.b@microchip.com Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-09-04Merge tag 'mfd-next-6.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull NFD updates from Lee Jones: "New Drivers: - Add support for the Cirrus Logic CS42L43 Audio CODEC Fix-ups: - Make use of specific printk() format tags for various optimisations - Kconfig / module modifications / tweaking - Simplify obtaining resources (memory, device data) using unified API helpers - Bunch of Device Tree additions, conversions and adaptions - Convert a bunch of Regmap configurations to use the Maple Tree cache - Ensure correct includes are present and remove some that are not required - Remove superfluous code - Reduce amount of cycles spent in critical sections - Omit the use of redundant casts and if relevant replace with better ones - Swap out raw_spin_{un}lock_irq{save,restore}() for spin_{un}lock_irq{save,restore}() Bug Fixes: - Repair theoretical deadlock situation - Fix some link-time dependencies - Use more appropriate datatype when casting" * tag 'mfd-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (70 commits) mfd: mc13xxx: Simplify device data fetching in probe() mfd: rz-mtu3: Replace raw_spin_lock->spin_lock() mfd: rz-mtu3: Reduce critical sections mfd: mxs-lradc: Fix Wvoid-pointer-to-enum-cast warning mfd: wm31x: Fix Wvoid-pointer-to-enum-cast warning mfd: wm8994: Fix Wvoid-pointer-to-enum-cast warning mfd: tc3589: Fix Wvoid-pointer-to-enum-cast warning mfd: lp87565: Fix Wvoid-pointer-to-enum-cast warning mfd: hi6421-pmic: Fix Wvoid-pointer-to-enum-cast warning mfd: max77541: Fix Wvoid-pointer-to-enum-cast warning mfd: max14577: Fix Wvoid-pointer-to-enum-cast warning mfd: stmpe: Fix Wvoid-pointer-to-enum-cast warning mfd: rn5t618: Remove redundant of_match_ptr() mfd: lochnagar-i2c: Remove redundant of_match_ptr() mfd: stpmic1: Remove redundant of_match_ptr() mfd: act8945a: Remove redundant of_match_ptr() mfd: rsmu_spi: Remove redundant of_match_ptr() mfd: altera-a10sr: Remove redundant of_match_ptr() mfd: rsmu_i2c: Remove redundant of_match_ptr() mfd: tc3589x: Remove redundant of_match_ptr() ...
2023-09-04counter: chrdev: fix getting array extensionsFabrice Gasnier
When trying to watch a component array extension, and the array isn't the first extended element, it fails as the type comparison is always done on the 1st element. Fix it by indexing the 'ext' array. Example on a dummy struct counter_comp: static struct counter_comp dummy[] = { COUNTER_COMP_DIRECTION(..), ..., COUNTER_COMP_ARRAY_CAPTURE(...), }; static struct counter_count dummy_cnt = { ... .ext = dummy, .num_ext = ARRAY_SIZE(dummy), } Currently, counter_get_ext() returns -EINVAL when trying to add a watch event on one of the capture array element in such example. Fixes: d2011be1e22f ("counter: Introduce the COUNTER_COMP_ARRAY component type") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20230829134029.2402868-2-fabrice.gasnier@foss.st.com Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-08-18mfd: rz-mtu3: Link time dependenciesArnd Bergmann
The new set of drivers for RZ/G2L MTU3a tries to enable compile-testing the individual client drivers even when the MFD portion is disabled but gets it wrong, causing a link failure when the core is in a loadable module but the other drivers are built-in: x86_64-linux-ld: drivers/pwm/pwm-rz-mtu3.o: in function `rz_mtu3_pwm_apply': pwm-rz-mtu3.c:(.text+0x4bf): undefined reference to `rz_mtu3_8bit_ch_write' x86_64-linux-ld: pwm-rz-mtu3.c:(.text+0x509): undefined reference to `rz_mtu3_disable' arm-linux-gnueabi-ld: drivers/counter/rz-mtu3-cnt.o: in function `rz_mtu3_cascade_counts_enable_get': rz-mtu3-cnt.c:(.text+0xbec): undefined reference to `rz_mtu3_shared_reg_read' It seems better not to add the extra complexity here but instead just use a normal hard dependency, so remove the #else portion in the header along with the "|| COMPILE_TEST". This could also be fixed by having slightly more elaborate Kconfig dependencies or using the cursed 'IS_REACHABLE()' helper, but in practice it's already possible to compile-test all these drivers by enabling the mtd portion. Fixes: 254d3a727421c ("pwm: Add Renesas RZ/G2L MTU3a PWM driver") Fixes: 0be8907359df4 ("counter: Add Renesas RZ/G2L MTU3a counter driver") Fixes: 654c293e1687b ("mfd: Add Renesas RZ/G2L MTU3a core driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230719090430.1925182-1-arnd@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-08-16counter: rz-mtu3-cnt: Reorder locking sequence for consistencyBiju Das
All functions except rz_mtu3_count_enable_write(), call pm_runtime_{get,put} inside the lock. For consistency do the same here. Reported-by: Pavel Machek <pavel@denx.de> Closes: https://lore.kernel.org/r/ZH8Fmom8vZ4DwxqA@duo.ucw.cz Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230725154611.227556-1-biju.das.jz@bp.renesas.com/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-08-16counter: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230714174357.4053541-1-robh@kernel.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-08-04Merge tag 'counter-fixes-for-6.5a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus William writes: First set of Counter fixes for 6.5 In commit d428487471ba ("counter: i8254: Introduce the Intel 8254 interface library module"), the misplacement of the I8254 Kconfig entry results in the "Counter support" submenu items disappearing in menuconfig. A fix is provided to reposition the I8254 Kconfig entry to restore the intended submenu behavior. * tag 'counter-fixes-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: Fix menuconfig "Counter support" submenu entries disappearance
2023-06-21counter: Fix menuconfig "Counter support" submenu entries disappearanceWilliam Breathitt Gray
The current placement of the I8254 Kconfig entry results in the disappearance of the "Counter support" submenu items in menuconfig. Move the I8254 above the menuconfig COUNTER entry to restore the intended submenu behavior. Fixes: d428487471ba ("counter: i8254: Introduce the Intel 8254 interface library module") Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Closes: https://lore.kernel.org/all/32ddaa7b-53a8-d61f-d526-b545bd561337@linux.intel.com/ Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20230620170159.556788-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-06-15Merge tag 'counter-updates-for-6.5a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next William writes: First set of Counter updates for the 6.5 cycle Biggest changes in this set include the introduction of a new Intel 8254 interface library module and the refactoring of the existing 104-quad-8 modules to migrate it to the regmap API. Some other minor cleanups touching tools/counter and stm32-timer-cnt are also present. Changes * 104-quad-8 - Remove reference in Kconfig to 25-bit counter value - Utilize bitfield access macros - Refactor to buffer states for CMR, IOR, and IDR - Utilize helper functions to handle PR, FLAG and PSC - Migrate to the regmap API * i8254 - Introduce the Intel 8254 interface library module * stm32-timer-cnt - Reset TIM_TISEL to its default value in probe * tools/counter - Add .gitignore - Remove lingering 'include' directories on make clean * tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: i8254: Introduce the Intel 8254 interface library module counter: 104-quad-8: Migrate to the regmap API counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR counter: 104-quad-8: Utilize bitfield access macros tools/counter: Makefile: Remove lingering 'include' directories on make clean tools/counter: Add .gitignore counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probe counter: 104-quad-8: Remove reference in Kconfig to 25-bit counter value
2023-06-08counter: i8254: Introduce the Intel 8254 interface library moduleWilliam Breathitt Gray
Exposes consumer library functions providing support for interfaces compatible with the venerable Intel 8254 Programmable Interval Timer (PIT). The Intel 8254 PIT first appeared in the early 1980s and was used initially in IBM PC compatibles. The popularity of the original Intel 825x family of chips led to many subsequent variants and clones of the interface in various chips and integrated circuits. Although still popular, interfaces compatible with the Intel 8254 PIT are nowdays typically found embedded in larger VLSI processing chips and FPGA components rather than as discrete ICs. A CONFIG_I8254 Kconfig option is introduced by this patch. Modules wanting access to these i8254 library functions should select this Kconfig option, and import the I8254 symbol namespace. Link: https://lore.kernel.org/r/f6fe32c2db9525d816ab1a01f45abad56c081652.1681665189.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-05-31counter: add HAS_IOPORT_MAP dependencyNiklas Schnelle
The 104_QUAD_8 counter driver uses devm_ioport_map() without depending on HAS_IOPORT_MAP. This means the driver is not usable on platforms such as s390 which do not support I/O port mapping. Add the missing HAS_IOPORT_MAP dependency to make this explicit. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230522105049.1467313-8-schnelle@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-18counter: 104-quad-8: Migrate to the regmap APIWilliam Breathitt Gray
The regmap API supports IO port accessors so we can take advantage of regmap abstractions rather than handling access to the device registers directly in the driver. With regmap we get boundary checks, read-write permissions, operation synchronization locks, and more for free. Most important of all, rather than rolling our own we utilize implementations that are known to work and gain from any future improvements and fixes that come. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/1f1f7920d2be94aedb6fdf49f429fe6137c8cb24.1681753140.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-05-18counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSCWilliam Breathitt Gray
The Preset Register (PR), Flag Register (FLAG), and Filter Clock Prescaler (PSC) have common usage patterns. Wrap up such usage into dedicated functions to improve code clarity. Link: https://lore.kernel.org/r/a2d663337bf2907e0283023c06b1ddcbb32f7f6d.1681753140.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-05-18counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDRWilliam Breathitt Gray
The 104-quad-8 driver buffers the device configuration states separately, however each device has only three control registers: CMR, IOR, and IDR. Refactoring to buffer the states of these control registers rather than each configuration separately results in succinct code that more closely matches what is happening on the device. Link: https://lore.kernel.org/r/48071415aed43ecdd8595174191b0d906205a9e3.1681753140.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-05-18counter: 104-quad-8: Utilize bitfield access macrosWilliam Breathitt Gray
The 104-QUAD-8 features several registers with various bitfields. Utilize bitfield access macros such as u8_get_bits() and u8_encode_bits() to make the code easier to read and the intent clearer. Suggested-by: Jonathan Cameron <jic23@kernel.org> Link: https://lore.kernel.org/r/7cea5ad049c75d8d1c6f25e288aa743a8d2a25d8.1681753140.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-05-09counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probeUwe Kleine-König
The driver assumes that the input selection register (TIM_TISEL) is at its reset default value. Usually this is the case, but the bootloader might have modified it. This bases on a similar patch submitted by Olivier Moysan for pwm-stm32. Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230413212339.3611722-1-u.kleine-koenig@pengutronix.de/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-05-09counter: 104-quad-8: Remove reference in Kconfig to 25-bit counter valueWilliam Breathitt Gray
Support for 25-bit counter values was removed in commit 4aa3b75c7460 ("counter: 104-quad-8: Fix race condition between FLAG and CNTR reads"). Adjust the Kconfig description of CONFIG_104_QUAD_8 to remove reference of 25-bit counter values. Link: https://lore.kernel.org/r/20230410134516.102886-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-05-02Merge tag 'mfd-next-6.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Renesas RZ/G2L MTU3 New Device Support: - Add support for Lenovo Yoga Book X90F to Intel CHT WC - Add support for MAX5970 and MAX5978 to Simple MFD (I2C) - Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI - Add support for AXP15060 PMIC to X-Powers PMIC collection Remove Device Support: - Remove support for Samsung 5M8751 and S5M8763 PMIC devices New Functionality: - Convert deprecated QCOM IRQ Chip to config registers - Add support for 32-bit address spaces to Renesas SMUs Fix-ups: - Make use of APIs / MACROs designed to simplify and demystify - Add / improve Device Tree bindings - Memory saving struct layout optimisations - Remove old / deprecated functionality - Factor out unassigned register addresses from ranges - Trivial: Spelling fixes, renames and coding style fixes - Rid 'defined but not used' warnings - Remove ineffective casts and pointer stubs Bug Fixes: - Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms - Remove MODULE_*() helpers from non-tristate drivers - Do not attempt to use out-of-range memory addresses associated with io_base - Provide missing export helpers - Fix remap bulk read optimisation fallout - Fix memory leak issues in error paths" * tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits) dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant mfd: axp20x: Add support for AXP15060 PMIC dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write() dt-bindings: mfd: dlg,da9063: Document voltage monitoring dt-bindings: mfd: stm32: Remove unnecessary blank lines dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver counter: Add Renesas RZ/G2L MTU3a counter driver Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select mfd: Add Renesas RZ/G2L MTU3a core driver dt-bindings: timer: Document RZ/G2L MTU3a bindings mfd: rsmu_i2c: Convert to i2c's .probe_new() again mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs mfd: dln2: Fix memory leak in dln2_probe() mfd: axp20x: Fix axp288 writable-ranges ...
2023-04-26counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()Dan Carpenter
These error paths need to call mutex_unlock(&priv->lock) before returning. The lock is taken in rz_mtu3_lock_if_counter_is_valid(). Fixes: 25d21447d896 ("counter: Add Renesas RZ/G2L MTU3a counter driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/7b535d6b-6031-493a-84f6-82842089e637@kili.mountain
2023-04-26counter: Add Renesas RZ/G2L MTU3a counter driverBiju Das
Add RZ/G2L MTU3a counter driver. This IP supports the following phase counting modes on MTU1 and MTU2 channels 1) 16-bit phase counting modes on MTU1 and MTU2 channels. 2) 32-bit phase counting mode by cascading MTU1 and MTU2 channels. This patch adds 3 counter value channels. count0: 16-bit phase counter value channel on MTU1 count1: 16-bit phase counter value channel on MTU2 count2: 32-bit phase counter value channel by cascading MTU1 and MTU2 channels. The external input phase clock pin for the counter value channels are as follows: count0: "MTCLKA-MTCLKB" count1: "MTCLKA-MTCLKB" or "MTCLKC-MTCLKD" count2: "MTCLKA-MTCLKB" or "MTCLKC-MTCLKD" Use the sysfs variable "external_input_phase_clock_select" to select the external input phase clock pin and "cascade_counts_enable" to enable/ disable cascading of channels. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: William Breathitt Gray <william.gray@linaro.org> Acked-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230330111632.169434-5-biju.das.jz@bp.renesas.com
2023-03-18counter: 104-quad-8: Fix Synapse action reported for Index signalsWilliam Breathitt Gray
Signal 16 and higher represent the device's Index lines. The priv->preset_enable array holds the device configuration for these Index lines. The preset_enable configuration is active low on the device, so invert the conditional check in quad8_action_read() to properly handle the logical state of preset_enable. Fixes: f1d8a071d45b ("counter: 104-quad-8: Add Generic Counter interface support") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230316203426.224745-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-03-18counter: 104-quad-8: Fix race condition between FLAG and CNTR readsWilliam Breathitt Gray
The Counter (CNTR) register is 24 bits wide, but we can have an effective 25-bit count value by setting bit 24 to the XOR of the Borrow flag and Carry flag. The flags can be read from the FLAG register, but a race condition exists: the Borrow flag and Carry flag are instantaneous and could change by the time the count value is read from the CNTR register. Since the race condition could result in an incorrect 25-bit count value, remove support for 25-bit count values from this driver; hard-coded maximum count values are replaced by a LS7267_CNTR_MAX define for consistency and clarity. Fixes: 28e5d3bb0325 ("iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8") Cc: <stable@vger.kernel.org> # 6.1.x Cc: <stable@vger.kernel.org> # 6.2.x Link: https://lore.kernel.org/r/20230312231554.134858-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-01-18counter: fix dependency references for config MICROCHIP_TCB_CAPTURELukas Bulwahn
Commit dfeef15e73ca ("counter: microchip-tcp-capture: Add appropriate arch deps for TCP driver") intends to add appropriate dependencies for the config MICROCHIP_TCB_CAPTURE. It however prefixes the intended configs with CONFIG, but in Kconfig files in contrast to source files, the configs are referenced to without prefixing them with CONFIG. Fix the dependency references due to this minor misconception. Fixes: dfeef15e73ca ("counter: microchip-tcp-capture: Add appropriate arch deps for TCP driver") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20230118074659.5909-1-lukas.bulwahn@gmail.com/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-01-13counter: microchip-tcp-capture: Add appropriate arch deps for TCP driverPeter Robinson
Add the CONFIG_SOC_AT91SAM9 and CONFIG_SOC_SAM_V7 deps for the Microchip SoCs that support this IP block/driver plus compile time testing. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Link: https://lore.kernel.org/r/20230108074750.443705-4-pbrobinson@gmail.com/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-01-13counter: ftm-quaddec: Depend on the Layerscape SoCPeter Robinson
At the moment only the Freescale LS1021A is the only HW that supports this IP block so add an appropriate dependency and compile test. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Link: https://lore.kernel.org/r/20230108074750.443705-3-pbrobinson@gmail.com/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-01-13counter: intel-qep: Depend on X86Peter Robinson
Limit the Intel counter driver to X86, it doesn't make sense to build it for all arches if the counter subsystem is enabled. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Link: https://lore.kernel.org/r/20230108074750.443705-2-pbrobinson@gmail.com/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2023-01-13counter: Sort the Kconfig entries alphabeticallyPeter Robinson
Sort the Kconfig menu alphabetically to make it easier to read as the list grows larger. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Link: https://lore.kernel.org/r/20230108074750.443705-1-pbrobinson@gmail.com/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2022-11-26counter: stm32-lptimer-cnt: fix the check on arr and cmp registers updateFabrice Gasnier
The ARR (auto reload register) and CMP (compare) registers are successively written. The status bits to check the update of these registers are polled together with regmap_read_poll_timeout(). The condition to end the loop may become true, even if one of the register isn't correctly updated. So ensure both status bits are set before clearing them. Fixes: d8958824cf07 ("iio: counter: Add support for STM32 LPTimer") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20221123133609.465614-1-fabrice.gasnier@foss.st.com/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2022-10-23counter: 104-quad-8: Fix race getting function mode and directionWilliam Breathitt Gray
The quad8_action_read() function checks the Count function mode and Count direction without first acquiring a lock. This is a race condition because the function mode could change by the time the direction is checked. Because the quad8_function_read() already acquires a lock internally, the quad8_function_read() is refactored to spin out the no-lock code to a new quad8_function_get() function. To resolve the race condition in quad8_action_read(), a lock is acquired before calling quad8_function_get() and quad8_direction_read() in order to get both function mode and direction atomically. Fixes: f1d8a071d45b ("counter: 104-quad-8: Add Generic Counter interface support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221020141121.15434-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2022-10-23counter: microchip-tcb-capture: Handle Signal1 read and SynapseWilliam Breathitt Gray
The signal_read(), action_read(), and action_write() callbacks have been assuming Signal0 is requested without checking. This results in requests for Signal1 returning data for Signal0. This patch fixes these oversights by properly checking for the Signal's id in the respective callbacks and handling accordingly based on the particular Signal requested. The trig_inverted member of the mchp_tc_data is removed as superfluous. Fixes: 106b104137fd ("counter: Add microchip TCB capture counter") Cc: stable@vger.kernel.org Reviewed-by: Kamel Bouhara <kamel.bouhara@bootlin.com> Link: https://lore.kernel.org/r/20221018121014.7368-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2022-10-17counter: ti-ecap-capture: fix IS_ERR() vs NULL checkDan Carpenter
The devm_counter_alloc() function returns NULL on error. It doesn't return error pointers. Fixes: 4e2f42aa00b6 ("counter: ti-ecap-capture: capture driver support for ECAP") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Julien Panis <jpanis@baylibre.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/Y0bUbZvfDJHBG9C6@kili/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2022-10-17counter: Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_arrayWilliam Breathitt Gray
A spare warning was reported for drivers/counter/ti-ecap-capture.c:: sparse warnings: (new ones prefixed by >>) >> drivers/counter/ti-ecap-capture.c:380:8: sparse: sparse: symbol 'ecap_cnt_pol_array' was not declared. Should it be static? vim +/ecap_cnt_pol_array +380 drivers/counter/ti-ecap-capture.c 379 > 380 static DEFINE_COUNTER_ARRAY_POLARITY(ecap_cnt_pol_array, ecap_cnt_pol_avail, ECAP_NB_CEVT); 381 The first argument to the DEFINE_COUNTER_ARRAY_POLARITY() macro is a token serving as the symbol name in the definition of a new struct counter_array structure. However, this macro actually expands to two statements:: #define DEFINE_COUNTER_ARRAY_POLARITY(_name, _enums, _length) \ DEFINE_COUNTER_AVAILABLE(_name##_available, _enums); \ struct counter_array _name = { \ .type = COUNTER_COMP_SIGNAL_POLARITY, \ .avail = &(_name##_available), \ .length = (_length), \ } Because of this, the "static" on line 380 only applies to the first statement. This patch splits out the DEFINE_COUNTER_AVAILABLE() line and leaves DEFINE_COUNTER_ARRAY_POLARITY() as a simple structure definition to avoid issues like this. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/all/202210020619.NQbyomII-lkp@intel.com/ Cc: Julien Panis <jpanis@baylibre.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
2022-10-08Merge tag 'gpio-updates-for-v6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "We have a single new driver, support for a bunch of new models, improvements in drivers and core gpiolib code as well device-tree bindings changes. Summary: New driver: - IMX System Controller Unit GPIOs GPIO core: - add fdinfo output for the GPIO character device file descriptors (allows user-space to determine which processes own which GPIO lines) - improvements to OF GPIO code - new quirk for Asus UM325UAZ in gpiolib-acpi - new quirk for Freescale SPI in gpiolib-of Driver improvements: - add a new macro that reduces the amount of boilerplate code in ISA drivers and use it in relevant drivers - support two new models in gpio-pca953x - support new model in gpio-f7188x - convert more drivers to use immutable irq chips - other minor tweaks Device-tree bindings: - add DT bindings for gpio-imx-scu - convert Xilinx GPIO bindings to YAML - reference the properties from the SPI peripheral device-tree bindings instead of providing custom ones in the GPIO controller document - add parsing of GPIO hog nodes to the DT bindings for gpio-mpfs-gpio - relax the node name requirements in gpio-stmpe - add new models for gpio-rcar and gpio-pxa95xx - add a new vendor prefix: Diodes (for Diodes, Inc.) Misc: - pulled in the immutable branch from the x86 platform drivers tree including support for a new simatic board that depends on GPIO changes" * tag 'gpio-updates-for-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (36 commits) gpio: tc3589x: Make irqchip immutable gpiolib: cdev: add fdinfo output for line request file descriptors gpio: twl4030: Reorder functions which allows to drop a forward declaraion gpiolib: fix OOB access in quirk callbacks gpiolib: of: factor out conversion from OF flags gpiolib: rework quirk handling in of_find_gpio() gpiolib: of: make Freescale SPI quirk similar to all others gpiolib: of: do not ignore requested index when applying quirks gpio: ws16c48: Ensure number of irq matches number of base gpio: 104-idio-16: Ensure number of irq matches number of base gpio: 104-idi-48: Ensure number of irq matches number of base gpio: 104-dio-48e: Ensure number of irq matches number of base counter: 104-quad-8: Ensure number of irq matches number of base isa: Introduce the module_isa_driver_with_irq helper macro gpio: pca953x: Add support for PCAL6534 gpio: pca953x: Swap if statements to save later complexity gpio: pca953x: Fix pca953x_gpio_set_pull_up_down() dt-bindings: gpio: pca95xx: add entry for pcal6534 and PI4IOE5V6534Q dt-bindings: vendor-prefixes: add Diodes gpio: mt7621: Switch to use platform_get_irq() function ...
2022-10-08Merge tag 'char-misc-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...
2022-09-30counter: ti-ecap-capture: capture driver support for ECAPJulien Panis
ECAP hardware on TI AM62x SoC supports capture feature. It can be used to timestamp events (falling/rising edges) detected on input signal. This commit adds capture driver support for ECAP hardware on AM62x SoC. In the ECAP hardware, capture pin can also be configured to be in PWM mode. Current implementation only supports capture operating mode. Hardware also supports timebase sync between multiple instances, but this driver supports simple independent capture functionality. Signed-off-by: Julien Panis <jpanis@baylibre.com> Link: https://lore.kernel.org/r/20220923142437.271328-4-jpanis@baylibre.com/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/25644ce1f2fd15d116977770ede20e024f658513.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30counter: Introduce the COUNTER_COMP_ARRAY component typeWilliam Breathitt Gray
The COUNTER_COMP_ARRAY Counter component type is introduced to enable support for Counter array components. With Counter array components, exposure for buffers on counter devices can be defined via new Counter array component macros. This should simplify code for driver authors who would otherwise need to define individual Counter components for each array element. Eight Counter array component macros are introduced:: DEFINE_COUNTER_ARRAY_U64(_name, _length) DEFINE_COUNTER_ARRAY_CAPTURE(_name, _length) DEFINE_COUNTER_ARRAY_POLARITY(_name, _enums, _length) COUNTER_COMP_DEVICE_ARRAY_U64(_name, _read, _write, _array) COUNTER_COMP_COUNT_ARRAY_U64(_name, _read, _write, _array) COUNTER_COMP_SIGNAL_ARRAY_U64(_name, _read, _write, _array) COUNTER_COMP_ARRAY_CAPTURE(_read, _write, _array) COUNTER_COMP_ARRAY_POLARITY(_read, _write, _array) Eight Counter array callbacks are introduced as well:: int (*signal_array_u32_read)(struct counter_device *counter, struct counter_signal *signal, size_t idx, u32 *val); int (*signal_array_u32_write)(struct counter_device *counter, struct counter_signal *signal, size_t idx, u32 val); int (*device_array_u64_read)(struct counter_device *counter, size_t idx, u64 *val); int (*count_array_u64_read)(struct counter_device *counter, struct counter_count *count, size_t idx, u64 *val); int (*signal_array_u64_read)(struct counter_device *counter, struct counter_signal *signal, size_t idx, u64 *val); int (*device_array_u64_write)(struct counter_device *counter, size_t idx, u64 val); int (*count_array_u64_write)(struct counter_device *counter, struct counter_count *count, size_t idx, u64 val); int (*signal_array_u64_write)(struct counter_device *counter, struct counter_signal *signal, size_t idx, u64 val); Driver authors can handle reads/writes for an array component by receiving an element index via the `idx` parameter and processing the respective value via the `val` parameter. For example, suppose a driver wants to expose a Count's read-only capture buffer of four elements using a callback `foobar_capture_read()`:: DEFINE_COUNTER_ARRAY_CAPTURE(foobar_capture_array, 4); COUNTER_COMP_ARRAY_CAPTURE(foobar_capture_read, NULL, foobar_capture_array) Respective sysfs attributes for each array element would appear for the respective Count: * /sys/bus/counter/devices/counterX/countY/capture0 * /sys/bus/counter/devices/counterX/countY/capture1 * /sys/bus/counter/devices/counterX/countY/capture2 * /sys/bus/counter/devices/counterX/countY/capture3 If a user tries to read _capture2_ for example, `idx` will be `2` when passed to the `foobar_capture_read()` callback, and thus the driver knows which array element to handle. Counter arrays for polarity elements can be defined in a similar manner as u64 elements:: const enum counter_signal_polarity foobar_polarity_states[] = { COUNTER_SIGNAL_POLARITY_POSITIVE, COUNTER_SIGNAL_POLARITY_NEGATIVE, }; DEFINE_COUNTER_ARRAY_POLARITY(foobar_polarity_array, foobar_polarity_states, 4); COUNTER_COMP_ARRAY_POLARITY(foobar_polarity_read, foobar_polarity_write, foobar_polarity_array) Tested-by: Julien Panis <jpanis@baylibre.com> Link: https://lore.kernel.org/r/5310c22520aeae65b1b74952419f49ac4c8e1ec1.1664204990.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/a51fd608704bdfc5a0efa503fc5481df34241e0a.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30counter: Consolidate Counter extension sysfs attribute creationWilliam Breathitt Gray
Counter extensions are handled for the Device, Counts, and Signals. The code loops through each Counter extension and creates the expected sysfs attributes. This patch consolidates that code into functions to reduce redundancy and make the intention of the code clearer. Link: https://lore.kernel.org/r/6f2121cf52073028c119dbf981a8b72f3eb625d2.1664204990.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/0469c3ae3fbccbca908993c78d94f221761a6a3a.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30counter: 104-quad-8: Add Signal polarity componentWilliam Breathitt Gray
The 104-quad-8 driver provides support for Index signal polarity modes via the "index_polarity" Signal component. This patch exposes the same functionality through the more standard "polarity" Signal component. Link: https://lore.kernel.org/r/01d00c21873159833035cb6775d0d0e8ad55f2ef.1664204990.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/0bf840beee1665e9f04ea82368ecdde87c791a22.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30counter: Introduce the Signal polarity componentWilliam Breathitt Gray
The Signal polarity component represents the active level of a respective Signal. There are two possible states: positive (rising edge) and negative (falling edge); enum counter_signal_polarity represents these states. A convenience macro COUNTER_COMP_POLARITY() is provided for driver authors to declare a Signal polarity component. Cc: Julien Panis <jpanis@baylibre.com> Link: https://lore.kernel.org/r/8f47d6e1db71a11bb1e2666f8e2a6e9d256d4131.1664204990.git.william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/b6e53438badcb6318997d13dd2fc052f97d808ac.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30counter: interrupt-cnt: Implement watch_validate callbackWilliam Breathitt Gray
The interrupt-cnt counter driver only pushes one type of event on only one channel: COUNTER_EVENT_CHANGE_OF_STATE on channel 0. The interrupt_cnt_watch_validate() watch_valid callback is implemented to ensure watch configurations are valid for this driver. Cc: Oleksij Rempel <linux@rempel-privat.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Link: https://lore.kernel.org/r/20220815225058.144203-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/c50b5eede7d3f523de8dc3937dc44680f2773e1d.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30counter: Move symbols into COUNTER namespaceWilliam Breathitt Gray
Counter subsystem symbols are only relevant to counter drivers. A COUNTER namespace is created to control the availability of these symbols to modules that import this namespace explicitly. Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Oleksij Rempel <linux@rempel-privat.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com> Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked-by: David Lechner <david@lechnology.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20220815220321.74161-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/8a756df96c24946547a7ece5caa5f654809c5e7f.1664318353.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22counter: 104-quad-8: Fix skipped IRQ lines during events configurationWilliam Breathitt Gray
IRQ trigger configuration is skipped if it has already been set before; however, the IRQ line still needs to be OR'd to irq_enabled because irq_enabled is reset for every events_configure call. This patch moves the irq_enabled OR operation update to before the irq_trigger check so that IRQ line enablement is not skipped. Fixes: c95cc0d95702 ("counter: 104-quad-8: Fix persistent enabled events bug") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220815122301.2750-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/179eed11eaf225dbd908993b510df0c8f67b1230.1663844776.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15counter: 104-quad-8: Ensure number of irq matches number of baseWilliam Breathitt Gray
The 104-quad-8 module calls devm_request_irq() for each device. If the number of irq passed to the module does not match the number of base, a default value of 0 is passed to devm_request_irq(). IRQ 0 is probably not what the user wants, so utilize the module_isa_driver_with_irq macro to ensure the number of irq matches the number of base. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Acked-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-14counter: 104-quad-8: Implement and utilize register structuresWilliam Breathitt Gray
Reduce magic numbers and improve code readability by implementing and utilizing named register data structures. Link: https://lore.kernel.org/r/20220707171709.36010-1-william.gray@linaro.org/ Cc: Syed Nayyar Waris <syednwaris@gmail.com> Tested-by: Fred Eckert <Frede@cmslaser.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/285fdc7c03892251f50bdbf2c28c19998243a6a3.1657813472.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-14counter: 104-quad-8: Utilize iomap interfaceWilliam Breathitt Gray
This driver doesn't need to access I/O ports directly via inb()/outb() and friends. This patch abstracts such access by calling ioport_map() to enable the use of more typical ioread8()/iowrite8() I/O memory accessor calls. Link: https://lore.kernel.org/r/861c003318dce3d2bef4061711643bb04f5ec14f.1652201921.git.william.gray@linaro.org Cc: Syed Nayyar Waris <syednwaris@gmail.com> Suggested-by: David Laight <David.Laight@ACULAB.COM> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/e971b897cacfac4cb2eca478f5533d2875f5cadd.1657813472.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-28Merge tag 'char-misc-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
2022-03-18counter: add defaults to switch-statementsTom Rix
Clang static analysis reports this representative problem counter-chrdev.c:482:3: warning: Undefined or garbage value returned to caller return ret; ^~~~~~~~~~ counter_get_data() has a multilevel switches, some without defaults, so ret is sometimes not set. Add returning -EINVAL similar to other defaults. Link: https://lore.kernel.org/r/20220227161746.82776-1-trix@redhat.com Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Syed Nayyar Waris <syednwaris@gmail.com> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/b98d1a3ed4b0b324b261b23defd1bdddddba4d44.1647373009.git.vilhelm.gray@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-18counter: interrupt-cnt: add counter_push_event()Oleksij Rempel
Add counter_push_event() to notify user space about new pulses Link: https://lore.kernel.org/r/20220203135727.2374052-3-o.rempel@pengutronix.de Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/9da3460113b5092e8658e12f23578567aab7cc5f.1647373009.git.vilhelm.gray@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-18counter: Set counter device nameWilliam Breathitt Gray
Naming the counter device provides a convenient way to identify it in devres_log events and similar situations. This patch names the counter device by combining the prefix "counter" with the counter device's unique ID. Link: https://lore.kernel.org/r/20220204084551.16397-1-vilhelm.gray@gmail.com Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Link: https://lore.kernel.org/r/87cc8eb4c84f49f89290577dc9231b2e4d7d3e8c.1647373009.git.vilhelm.gray@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2024-06-26 10:12:38 +0000