summaryrefslogtreecommitdiff
path: root/drivers/cpufreq
AgeCommit message (Collapse)Author
2017-09-26cpufreq: dt: Fix sysfs duplicate filename creation for platform-deviceSuniel Mahesh
ti-cpufreq and cpufreq-dt-platdev drivers are registering platform-device with same name "cpufreq-dt" using platform_device_register_*() routines. This is leading to build warnings appended below. Providing hardware information to OPP framework along with the platform- device creation should be done by ti-cpufreq driver before cpufreq-dt driver comes into place. This patch add's TI am33xx, am43 and dra7 platforms (which use opp-v2 property) to the blacklist of devices in cpufreq-dt-platform driver to avoid creating platform-device twice and remove build warnings. [ 2.370167] ------------[ cut here ]------------ [ 2.375087] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x58/0x78 [ 2.383112] sysfs: cannot create duplicate filename '/devices/platform/cpufreq-dt' [ 2.391219] Modules linked in: [ 2.394506] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-next-20170912 #1 [ 2.402006] Hardware name: Generic AM33XX (Flattened Device Tree) [ 2.408437] [<c0110a28>] (unwind_backtrace) from [<c010ca84>] (show_stack+0x10/0x14) [ 2.416568] [<c010ca84>] (show_stack) from [<c0827d64>] (dump_stack+0xac/0xe0) [ 2.424165] [<c0827d64>] (dump_stack) from [<c0137470>] (__warn+0xd8/0x104) [ 2.431488] [<c0137470>] (__warn) from [<c01374d0>] (warn_slowpath_fmt+0x34/0x44) [ 2.439351] [<c01374d0>] (warn_slowpath_fmt) from [<c03459d0>] (sysfs_warn_dup+0x58/0x78) [ 2.447938] [<c03459d0>] (sysfs_warn_dup) from [<c0345ab8>] (sysfs_create_dir_ns+0x80/0x98) [ 2.456719] [<c0345ab8>] (sysfs_create_dir_ns) from [<c082c554>] (kobject_add_internal+0x9c/0x2d4) [ 2.466124] [<c082c554>] (kobject_add_internal) from [<c082c7d8>] (kobject_add+0x4c/0x9c) [ 2.474712] [<c082c7d8>] (kobject_add) from [<c05803e4>] (device_add+0xcc/0x57c) [ 2.482489] [<c05803e4>] (device_add) from [<c0584b74>] (platform_device_add+0x100/0x220) [ 2.491085] [<c0584b74>] (platform_device_add) from [<c05855a8>] (platform_device_register_full+0xf4/0x118) [ 2.501305] [<c05855a8>] (platform_device_register_full) from [<c067023c>] (ti_cpufreq_init+0x150/0x22c) [ 2.511253] [<c067023c>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170) [ 2.519838] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4) [ 2.528974] [<c0c00eb4>] (kernel_init_freeable) from [<c083bcac>] (kernel_init+0x8/0x110) [ 2.537565] [<c083bcac>] (kernel_init) from [<c0107d18>] (ret_from_fork+0x14/0x3c) [ 2.545981] ---[ end trace 2fc00e213c13ab20 ]--- [ 2.551051] ------------[ cut here ]------------ [ 2.555931] WARNING: CPU: 0 PID: 1 at lib/kobject.c:240 kobject_add_internal+0x254/0x2d4 [ 2.564578] kobject_add_internal failed for cpufreq-dt with -EEXIST, don't try to register things with the same name in the same directory. [ 2.577977] Modules linked in: [ 2.581261] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.13.0-next-20170912 #1 [ 2.590013] Hardware name: Generic AM33XX (Flattened Device Tree) [ 2.596437] [<c0110a28>] (unwind_backtrace) from [<c010ca84>] (show_stack+0x10/0x14) [ 2.604573] [<c010ca84>] (show_stack) from [<c0827d64>] (dump_stack+0xac/0xe0) [ 2.612172] [<c0827d64>] (dump_stack) from [<c0137470>] (__warn+0xd8/0x104) [ 2.619494] [<c0137470>] (__warn) from [<c01374d0>] (warn_slowpath_fmt+0x34/0x44) [ 2.627362] [<c01374d0>] (warn_slowpath_fmt) from [<c082c70c>] (kobject_add_internal+0x254/0x2d4) [ 2.636666] [<c082c70c>] (kobject_add_internal) from [<c082c7d8>] (kobject_add+0x4c/0x9c) [ 2.645255] [<c082c7d8>] (kobject_add) from [<c05803e4>] (device_add+0xcc/0x57c) [ 2.653027] [<c05803e4>] (device_add) from [<c0584b74>] (platform_device_add+0x100/0x220) [ 2.661615] [<c0584b74>] (platform_device_add) from [<c05855a8>] (platform_device_register_full+0xf4/0x118) [ 2.671833] [<c05855a8>] (platform_device_register_full) from [<c067023c>] (ti_cpufreq_init+0x150/0x22c) [ 2.681779] [<c067023c>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170) [ 2.690377] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4) [ 2.699510] [<c0c00eb4>] (kernel_init_freeable) from [<c083bcac>] (kernel_init+0x8/0x110) [ 2.708106] [<c083bcac>] (kernel_init) from [<c0107d18>] (ret_from_fork+0x14/0x3c) [ 2.716217] ---[ end trace 2fc00e213c13ab21 ]--- Fixes: edeec420de24 (cpufreq: dt-cpufreq: platdev Automatically create device with OPP v2) Signed-off-by: Suniel Mahesh <sunil.m@techveda.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-20cpufreq: ti-cpufreq: Support additional am43xx platformsDave Gerlach
Rather than letting the ti-cpufreq driver match against 'ti,am4372' machine compatible during probe let's match against 'ti,am43' so that we can support both 'ti,am4372' and 'ti,am438x' platforms which both match to this compatible. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-19cpufreq: dt-platdev: Add some missing platforms to the blacklistViresh Kumar
Commit edeec420de24 (cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2) missed adding few platforms to the blacklist which create the cpufreq-dt device from their own drivers, after some dependencies are sorted out. And for those platforms, both the platform specific driver and the cpufreq-dt-platdev driver try to create the cpufreq-dt device now. Fix that by including those platforms in the blacklist. This doesn't include the TI platforms, for which there is a separate patch. Fixes: edeec420de24 (cpufreq: dt-cpufreq: platdev Automatically create device with OPP v2) Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-14dmi: Mark all struct dmi_system_id instances constChristoph Hellwig
... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-09-05Merge tag 'acpi-4.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These include a usual ACPICA code update (this time to upstream revision 20170728), a fix for a boot crash on some systems with Thunderbolt devices connected at boot time, a rework of the handling of PCI bridges when setting up device wakeup, new support for Apple device properties, support for DMA configurations reported via ACPI on ARM64, APEI-related updates, ACPI EC driver updates and assorted minor modifications in several places. Specifics: - Update the ACPICA code in the kernel to upstream revision 20170728 including: * Alias operator handling update (Bob Moore). * Deferred resolution of reference package elements (Bob Moore). * Support for the _DMA method in walk resources (Bob Moore). * Tables handling update and support for deferred table verification (Lv Zheng). * Update of SMMU models for IORT (Robin Murphy). * Compiler and disassembler updates (Alex James, Erik Schmauss, Ganapatrao Kulkarni, James Morse). * Tools updates (Erik Schmauss, Lv Zheng). * Assorted minor fixes and cleanups (Bob Moore, Kees Cook, Lv Zheng, Shao Ming). - Rework the initialization of non-wakeup GPEs with method handlers in order to address a boot crash on some systems with Thunderbolt devices connected at boot time where we miss an early hotplug event due to a delay in GPE enabling (Rafael Wysocki). - Rework the handling of PCI bridges when setting up ACPI-based device wakeup in order to avoid disabling wakeup for bridges prematurely (Rafael Wysocki). - Consolidate Apple DMI checks throughout the tree, add support for Apple device properties to the device properties framework and use these properties for the handling of I2C and SPI devices on Apple systems (Lukas Wunner). - Add support for _DMA to the ACPI-based device properties lookup code and make it possible to use the information from there to configure DMA regions on ARM64 systems (Lorenzo Pieralisi). - Fix several issues in the APEI code, add support for exporting the BERT error region over sysfs and update APEI MAINTAINERS entry with reviewers information (Borislav Petkov, Dongjiu Geng, Loc Ho, Punit Agrawal, Tony Luck, Yazen Ghannam). - Fix a potential initialization ordering issue in the ACPI EC driver and clean it up somewhat (Lv Zheng). - Update the ACPI SPCR driver to extend the existing XGENE 8250 workaround in it to a new platform (m400) and to work around an Xgene UART clock issue (Graeme Gregory). - Add a new utility function to the ACPI core to support using ACPI OEM ID / OEM Table ID / Revision for system identification in blacklisting or similar and switch over the existing code already using this information to this new interface (Toshi Kani). - Fix an xpower PMIC issue related to GPADC reads that always return 0 without extra pin manipulations (Hans de Goede). - Add statements to print debug messages in a couple of places in the ACPI core for easier diagnostics (Rafael Wysocki). - Clean up the ACPI processor driver slightly (Colin Ian King, Hanjun Guo). - Clean up the ACPI x86 boot code somewhat (Andy Shevchenko). - Add a quirk for Dell OptiPlex 9020M to the ACPI backlight driver (Alex Hung). - Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal, Ronald Tschalär, Sumeet Pawnikar)" * tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits) ACPI / APEI: Suppress message if HEST not present intel_pstate: convert to use acpi_match_platform_list() ACPI / blacklist: add acpi_match_platform_list() ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources ACPI: make device_attribute const ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region ACPI: APEI: fix the wrong iteration of generic error status block ACPI / processor: make function acpi_processor_check_duplicates() static ACPI / EC: Clean up EC GPE mask flag ACPI: EC: Fix possible issues related to EC initialization order ACPI / PM: Add debug statements to acpi_pm_notify_handler() ACPI: Add debug statements to acpi_global_event_handler() ACPI / scan: Enable GPEs before scanning the namespace ACPICA: Make it possible to enable runtime GPEs earlier ACPICA: Dispatch active GPEs at init time ACPI: SPCR: work around clock issue on xgene UART ACPI: SPCR: extend XGENE 8250 workaround to m400 ACPI / LPSS: Don't abort ACPI scan on missing mem resource mailbox: pcc: Drop uninformative output during boot ACPI/IORT: Add IORT named component memory address limits ...
2017-09-04Merge branch 'intel_pstate'Rafael J. Wysocki
* intel_pstate: cpufreq: intel_pstate: Shorten a couple of long names cpufreq: intel_pstate: Simplify intel_pstate_adjust_pstate() cpufreq: intel_pstate: Improve IO performance with per-core P-states cpufreq: intel_pstate: Drop INTEL_PSTATE_HWP_SAMPLING_INTERVAL cpufreq: intel_pstate: Drop ->update_util from pstate_funcs cpufreq: intel_pstate: Do not use PID-based P-state selection
2017-09-04Merge branch 'pm-cpufreq-sched'Rafael J. Wysocki
* pm-cpufreq-sched: cpufreq: schedutil: Always process remote callback with slow switching cpufreq: schedutil: Don't restrict kthread to related_cpus unnecessarily cpufreq: Return 0 from ->fast_switch() on errors cpufreq: Simplify cpufreq_can_do_remote_dvfs() cpufreq: Process remote callbacks from any CPU if the platform permits sched: cpufreq: Allow remote cpufreq callbacks cpufreq: schedutil: Use unsigned int for iowait boost cpufreq: schedutil: Make iowait boost more energy efficient
2017-09-04Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (33 commits) cpufreq: imx6q: Fix imx6sx low frequency support cpufreq: speedstep-lib: make several arrays static, makes code smaller cpufreq: ti: Fix 'of_node_put' being called twice in error handling path cpufreq: dt-platdev: Drop few entries from whitelist cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2 ARM: ux500: don't select CPUFREQ_DT cpufreq: Convert to using %pOF instead of full_name cpufreq: Cap the default transition delay value to 10 ms cpufreq: dbx500: Delete obsolete driver mfd: db8500-prcmu: Get rid of cpufreq dependency cpufreq: enable the DT cpufreq driver on the Ux500 cpufreq: Loongson2: constify platform_device_id cpufreq: dt: Add r8a7796 support to to use generic cpufreq driver cpufreq: remove setting of policy->cpu in policy->cpus during init cpufreq: mediatek: add support of cpufreq to MT7622 SoC cpufreq: mediatek: add cleanups with the more generic naming cpufreq: rcar: Add support for R8A7795 SoC cpufreq: dt: Add rk3328 compatible to use generic cpufreq driver cpufreq: s5pv210: add missing of_node_put() cpufreq: Allow dynamic switching with CPUFREQ_ETERNAL latency ...
2017-08-29intel_pstate: convert to use acpi_match_platform_list()Toshi Kani
Convert to use acpi_match_platform_list() for the platform check. There is no change in functionality. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-29cpufreq: imx6q: Fix imx6sx low frequency supportLeonard Crestez
This patch contains the minimal changes required to support imx6sx OPP of 198 Mhz. Without this patch cpufreq still reports success but the frequency is not changed, the "arm" clock will still be at 396000000 in clk_summary. In order to do this PLL1 needs to be still kept enabled while changing the ARM clock. This is a hardware requirement: when ARM_PODF is changed in CCM we need to check the busy bit of CCM_CDHIPR bit 16 arm_podf_busy, and this bit is sync with PLL1 clock, so if PLL1 NOT enabled, this bit will never get clear. Keep pll1_sys explicitly enabled until after the rate is change to deal with this. Otherwise from the clk framework perspective pll1_sys is unused and gets turned off. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-29cpufreq: speedstep-lib: make several arrays static, makes code smallerColin Ian King
Don't populate arrays on the stack, instead make them static. Makes the object code smaller by over 860 bytes: Before: text data bss dec hex filename 10716 5196 0 15912 3e28 drivers/cpufreq/speedstep-lib.o After: text data bss dec hex filename 9690 5356 0 15046 3ac6 drivers/cpufreq/speedstep-lib.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-25cpufreq: ti: Fix 'of_node_put' being called twice in error handling pathChristophe Jaillet
If 'dev_pm_opp_set_supported_hw()' fails, 'opp_data->opp_node' refcount will be decremented 2 times. One, just a few lines above, and another one in the error handling path. Fix it by simply moving the 'of_node_put' call of the normal path. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-25cpufreq: dt-platdev: Drop few entries from whitelistViresh Kumar
Drop few ARM (32 and 64 bit) platforms from the whitelist which always use "operating-points-v2" property from their DT. They should continue to work after this patch. Tested on Hikey platform (only the "hisilicon,hi6220" entry). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-25cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2Viresh Kumar
The initial idea of creating the cpufreq-dt-platdev.c file was to keep a list of platforms that use the "operating-points" (V1) bindings and create cpufreq device for them only, as we weren't sure which platforms would want the device to get created automatically as some had their own cpufreq drivers as well, or wanted to initialize cpufreq after doing some stuff from platform code. But that wasn't the case with platforms using "operating-points-v2" property. We wanted the device to get created automatically without the need of adding them to the whitelist. Though, we will still have some exceptions where we don't want to create the device automatically. Rename the earlier platform list as *whitelist* and create a new *blacklist* as well. The cpufreq-dt device will get created if: - The platform is there in the whitelist OR - The platform has "operating-points-v2" property in CPU0's DT node and isn't part of the blacklist . Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-25cpufreq: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-22cpufreq: Cap the default transition delay value to 10 msViresh Kumar
If transition_delay_us isn't defined by the cpufreq driver, the default value of transition delay (time after which the cpufreq governor will try updating the frequency again) is currently calculated by multiplying transition_latency (nsec) with LATENCY_MULTIPLIER (1000) and then converting this time to usec. That gives the exact same value as transition_latency, just that the time unit is usec instead of nsec. With acpi-cpufreq for example, transition_latency is set to around 10 usec and we get transition delay as 10 ms. Which seems to be a reasonable amount of time to reevaluate the frequency again. But for platforms where frequency switching isn't that fast (like ARM), the transition_latency varies from 500 usec to 3 ms, and the transition delay becomes 500 ms to 3 seconds. Of course, that is a pretty bad default value to start with. We can try to come across a better formula (instead of multiplying with LATENCY_MULTIPLIER) to solve this problem, but will that be worth it ? This patch tries a simple approach and caps the maximum value of default transition delay to 10 ms. Of course, userspace can still come in and change this value anytime or individual drivers can rather provide transition_delay_us instead. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-22cpufreq: dbx500: Delete obsolete driverLinus Walleij
We have moved the Ux500 over to use the generic DT based cpufreq driver, so delete the old custom driver. At the same time select CPUFREQ_DT from the machine's Kconfig in order to satisfy the "default ARCH_U8500" selection on the old driver. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-21Merge back intel_pstate material for v4.14.Rafael J. Wysocki
2017-08-18cpufreq: enable the DT cpufreq driver on the Ux500Linus Walleij
This enables the generic DT and OPP-based cpufreq driver on the ST-Ericsson Ux500 series. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-18cpufreq: Loongson2: constify platform_device_idArvind Yadav
platform_device_id are not supposed to change at runtime. All functions working with platform_device_id provided by <linux/platform_device.h> work with const platform_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-18cpufreq: dt: Add r8a7796 support to to use generic cpufreq driverKhiem Nguyen
This patch adds the r8a7796 support the generic cpufreq driver by adding an appropriate compat string. This is in keeping with support for other Renesas ARM and arm64 based SoCs. Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com> [simon: new changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-18cpufreq: remove setting of policy->cpu in policy->cpus during initSudeep Holla
policy->cpu is copied into policy->cpus in cpufreq_online() before calling into cpufreq_driver->init(). So there's no need to set the same in the individual driver init() functions again. This patch removes the redundant setting of policy->cpu in policy->cpus in intel_pstate and cppc drivers. Reported-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-11cpufreq: intel_pstate: report correct CPU frequencies during traceDoug Smythies
The intel_pstate CPU frequency scaling driver has always calculated CPU frequency incorrectly. Recent changes have eliminted most of the issues, however the frequency reported in the trace buffer, if used, is incorrect. It remains desireable that cpu->pstate.scaling still be a nice round number for things such as when setting max and min frequencies. So the proposal is to just fix the reported frequency in the trace data. Fixes what remains of [1]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=96521 # [1] Signed-off-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-10cpufreq: mediatek: add support of cpufreq to MT7622 SoCSean Wang
MT7622 is a 64-bit ARMv8 based dual-core SoC (2 * Cortex-A53) with a single cluster. The hardware is also compatible with the current driver, so add MT7622 as one of the compatible string list. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-10cpufreq: mediatek: add cleanups with the more generic namingSean Wang
Since more MediaTek SoCs can be supported with the cpufreq driver and not limited to MT8173, a couple of cleanups are done here with renaming those functions and related structures with "mtk" instead of "mt8173". Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-10cpufreq: Return 0 from ->fast_switch() on errorsViresh Kumar
CPUFREQ_ENTRY_INVALID is a special symbol which is used to specify that an entry in the cpufreq table is invalid. But using it outside of the scope of the cpufreq table looks a bit incorrect. We can represent an invalid frequency by writing it as 0 instead if we need. Note that it is already done that way for the return value of the ->get() callback. Lets do the same for ->fast_switch() and not use CPUFREQ_ENTRY_INVALID outside of the scope of cpufreq table. Also update the comment over cpufreq_driver_fast_switch() to clearly mention what this returns. None of the drivers return CPUFREQ_ENTRY_INVALID as of now from ->fast_switch() callback and so we don't need to update any of those. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-10cpufreq: intel_pstate: Shorten a couple of long namesRafael J. Wysocki
The names of the INTEL_PSTATE_DEFAULT_SAMPLING_INTERVAL symbol and the get_target_pstate_use_cpu_load() function don't need to be so long any more, so make them shorter. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-10cpufreq: intel_pstate: Simplify intel_pstate_adjust_pstate()Rafael J. Wysocki
Since there is only one P-state selection routine in intel_pstate now, make intel_pstate_adjust_pstate() call it directly and drop the target_pstate argument from that function. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-08cpufreq: rcar: Add support for R8A7795 SoCKhiem Nguyen
After the commit "a399dc9fc50 cpufreq: shmobile: Use generic platdev driver", will use cpufreq-dt-platdev driver to enable cpufreq-dt support. Hence, follow the implementation to support new R8A7795 SoC. Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-04Merge v4.13 intel_pstate fixes.Rafael J. Wysocki
2017-08-04cpufreq: dt: Add rk3328 compatible to use generic cpufreq driverFinley Xiao
This patch adds the rk3328 compatible string for supporting the generic cpufreq driver on RK3328. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-04cpufreq: intel_pstate: Improve IO performance with per-core P-statesSrinivas Pandruvada
In the current implementation, the response latency between seeing SCHED_CPUFREQ_IOWAIT set and the actual P-state adjustment can be up to 10ms. It can be reduced by bumping up the P-state to the max at the time SCHED_CPUFREQ_IOWAIT is passed to intel_pstate_update_util(). With this change, the IO performance improves significantly. For a simple "grep -r . linux" (Here linux is the kernel source folder) with caches dropped every time on a Broadwell Xeon workstation with per-core P-states, the user and system time is shorter by as much as 30% - 40%. The same performance difference was not observed on clients that don't support per-core P-state. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-03Merge branches 'pm-cpufreq-x86', 'pm-cpufreq-docs' and 'intel_pstate'Rafael J. Wysocki
* pm-cpufreq-x86: cpufreq: x86: Make scaling_cur_freq behave more as expected * pm-cpufreq-docs: cpufreq: docs: Add missing cpuinfo_cur_freq description * intel_pstate: cpufreq: intel_pstate: Drop ->get from intel_pstate structure
2017-08-01cpufreq: Process remote callbacks from any CPU if the platform permitsViresh Kumar
On many platforms, CPUs can do DVFS across cpufreq policies. i.e CPU from policy-A can change frequency of CPUs belonging to policy-B. This is quite common in case of ARM platforms where we don't configure any per-cpu register. Add a flag to identify such platforms and update cpufreq_can_do_remote_dvfs() to allow remote callbacks if this flag is set. Also enable the flag for cpufreq-dt driver which is used only on ARM platforms currently. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Saravana Kannan <skannan@codeaurora.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-01sched: cpufreq: Allow remote cpufreq callbacksViresh Kumar
With Android UI and benchmarks the latency of cpufreq response to certain scheduling events can become very critical. Currently, callbacks into cpufreq governors are only made from the scheduler if the target CPU of the event is the same as the current CPU. This means there are certain situations where a target CPU may not run the cpufreq governor for some time. One testcase to show this behavior is where a task starts running on CPU0, then a new task is also spawned on CPU0 by a task on CPU1. If the system is configured such that the new tasks should receive maximum demand initially, this should result in CPU0 increasing frequency immediately. But because of the above mentioned limitation though, this does not occur. This patch updates the scheduler core to call the cpufreq callbacks for remote CPUs as well. The schedutil, ondemand and conservative governors are updated to process cpufreq utilization update hooks called for remote CPUs where the remote CPU is managed by the cpufreq policy of the local CPU. The intel_pstate driver is updated to always reject remote callbacks. This is tested with couple of usecases (Android: hackbench, recentfling, galleryfling, vellamo, Ubuntu: hackbench) on ARM hikey board (64 bit octa-core, single policy). Only galleryfling showed minor improvements, while others didn't had much deviation. The reason being that this patch only targets a corner case, where following are required to be true to improve performance and that doesn't happen too often with these tests: - Task is migrated to another CPU. - The task has high demand, and should take the target CPU to higher OPPs. - And the target CPU doesn't call into the cpufreq governor until the next tick. Based on initial work from Steve Muckle. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Saravana Kannan <skannan@codeaurora.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-01cpufreq: intel_pstate: Drop INTEL_PSTATE_HWP_SAMPLING_INTERVALRafael J. Wysocki
After commit 62611cb912f7 (intel_pstate: delete scheduler hook in HWP mode) the INTEL_PSTATE_HWP_SAMPLING_INTERVAL is not used anywhere in the code, so drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-27cpufreq: intel_pstate: Drop ->get from intel_pstate structureRafael J. Wysocki
The ->get callback in the intel_pstate structure was mostly there for the scaling_cur_freq sysfs attribute to work, but after commit f8475cef9008 (x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF) that attribute uses arch_freq_get_on_cpu() provided by the x86 arch code on all processors supported by intel_pstate, so it doesn't need the ->get callback from the driver any more. Moreover, the very presence of the ->get callback in the intel_pstate structure causes the cpuinfo_cur_freq attribute to be present when intel_pstate operates in the active mode, which is bogus, because the role of that attribute is to return the current CPU frequency as seen by the hardware. For intel_pstate, though, this is just an average frequency and not really current, but computed for the previous sampling interval (the actual current frequency may be way different at the point this value is obtained by reading from cpuinfo_cur_freq), and after commit 82b4e03e01bc (intel_pstate: skip scheduler hook when in "performance" mode) the value in cpuinfo_cur_freq may be stale or just 0, depending on the driver's operation mode. In fact, however, on the hardware supported by intel_pstate there is no way to read the current CPU frequency from it, so the cpuinfo_cur_freq attribute should not be present at all when this driver is in use. For this reason, drop intel_pstate_get() and clear the ->get callback pointer pointing to it, so that the cpuinfo_cur_freq is not present for intel_pstate in the active mode any more. Fixes: 82b4e03e01bc (intel_pstate: skip scheduler hook when in "performance" mode) Reported-by: Huaisheng Ye <yehs1@lenovo.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2017-07-26cpufreq: s5pv210: add missing of_node_put()Julia Lawall
for_each_compatible_node performs an of_node_get on each iteration, so a return from the loop requires an of_node_put. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression n; expression e,e1,e2; statement S; iterator i1; iterator name for_each_compatible_node; @@ for_each_compatible_node(n,e1,e2) { ... ( of_node_put(n); | e = n | return n; | i1(...,n,...) S | + of_node_put(n); ? return ...; ) ... } // </smpl> Additionally, call of_node_put on the previous value of np, obtained from of_find_compatible_node, that is no longer accessible at the point of the for_each_compatible_node. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26cpufreq: intel_pstate: Drop ->update_util from pstate_funcsRafael J. Wysocki
All systems use the same P-state selection "powersave" algorithm in the active mode if HWP is not used, so there's no need to provide a pointer for it in struct pstate_funcs any more. Drop ->update_util from struct pstate_funcs and make intel_pstate_set_update_util_hook() use intel_pstate_update_util() directly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26cpufreq: intel_pstate: Do not use PID-based P-state selectionRafael J. Wysocki
All systems with a defined ACPI preferred profile that are not "servers" have been using the load-based P-state selection algorithm in intel_pstate since 4.12-rc1 (mobile systems and laptops have been using it since 4.10-rc1) and no problems with it have been reported to date. In particular, no regressions with respect to the PID-based P-state selection have been reported. Also testing indicates that the P-state selection algorithm based on CPU load is generally on par with the PID-based algorithm performance-wise, and for some workloads it turns out to be better than the other one, while being more straightforward and easier to understand at the same time. Moreover, the PID-based P-state selection algorithm in intel_pstate is known to be unstable in some situation and generally problematic, the issues with it are hard to address and it has become a significant maintenance burden. For these reasons, make intel_pstate use the "powersave" P-state selection algorithm based on CPU load in the active mode on all systems and drop the PID-based P-state selection code along with all things related to it from the driver. Also update the documentation accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26cpufreq: Allow dynamic switching with CPUFREQ_ETERNAL latencyViresh Kumar
With the recent updates, CPUFREQ_ETERNAL is only used by the drivers which don't know their transition latency but want to use dynamic switching. Anyway, the routine cpufreq_policy_transition_delay_us() caps the value of transition latency to 10 ms now and that can be used safely with such platforms. Remove the check from cpufreq_init_governor() and allow dynamic switching for such configurations as well. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26cpufreq: Add CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING cpufreq driver flagViresh Kumar
The policy->transition_latency field is used for multiple purposes today and its not straight forward at all. This is how it is used: A. Set the correct transition_latency value. B. Set it to CPUFREQ_ETERNAL because: 1. We don't want automatic dynamic switching (with ondemand/conservative) to happen at all. 2. We don't know the transition latency. This patch handles the B.1. case in a more readable way. A new flag for the cpufreq drivers is added to disallow use of cpufreq governors which have dynamic_switching flag set. All the current cpufreq drivers which are setting transition_latency unconditionally to CPUFREQ_ETERNAL are updated to use it. They don't need to set transition_latency anymore. There shouldn't be any functional change after this patch. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26cpufreq: Replace "max_transition_latency" with "dynamic_switching"Viresh Kumar
There is no limitation in the ondemand or conservative governors which disallow the transition_latency to be greater than 10 ms. The max_transition_latency field is rather used to disallow automatic dynamic frequency switching for platforms which didn't wanted these governors to run. Replace max_transition_latency with a boolean (dynamic_switching) and check for transition_latency == CPUFREQ_ETERNAL along with that. This makes it pretty straight forward to read/understand now. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26cpufreq: arm_big_little: Make ->get_transition_latency() mandatoryViresh Kumar
All users of arm_big_little driver are defining it and there is no need to keep it optional. Make it mandatory to remove the always true conditional statement. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-26cpufreq: Don't set transition_latency for setpolicy driversViresh Kumar
The transition_latency field isn't used for drivers with ->setpolicy() callback present and there is no point setting it from the drivers. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22cpufreq: Use transition_delay_us for legacy governors as wellViresh Kumar
The policy->transition_delay_us field is used only by the schedutil governor currently, and this field describes how fast the driver wants the cpufreq governor to change CPUs frequency. It should rather be a common thing across all governors, as it doesn't have any schedutil dependency here. Create a new helper cpufreq_policy_transition_delay_us() to get the transition delay across all governors. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22cpufreq: governor: Drop min_sampling_rateViresh Kumar
The cpufreq core and governors aren't supposed to set a limit on how fast we want to try changing the frequency. This is currently done for the legacy governors with help of min_sampling_rate. At worst, we may end up setting the sampling rate to a value lower than the rate at which frequency can be changed and then one of the CPUs in the policy will be only changing frequency for ever. But that is something for the user to decide and there is no need to have special handling for such cases in the core. Leave it for the user to figure out. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22cpufreq: dt: Don't use generic platdev driver for tangoMarc Gonzalez
On tango platforms, firmware configures the CPU clock, and Linux is then only allowed to use the cpu_clk_divider to change the frequency. Build the OPP table dynamically at init, in order to support whatever firmware throws at us. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoCSean Wang
MT2701/MT7623 is a 32-bit ARMv7 based quad-core (4 * Cortex-A7) with single cluster and this hardware is also compatible with the existing driver through enabling CPU frequency feature with operating-points-v2 bindings. Also, this driver actually supports all MediaTek SoCs, the Kconfig menu entry and file name itself should be updated with more generic name to drop "MT8173" Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-20Merge branches 'intel_pstate' and 'pm-domains'Rafael J. Wysocki
* intel_pstate: cpufreq: intel_pstate: Correct the busy calculation for KNL * pm-domains: PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present