| Age | Commit message (Collapse) | Author |
|---|
|
Make the comment in blocking_notifier_call_chain() easier to
understand.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When I hot added a CPU, I found 'cpufreq' directory was not created
below /sys/devices/system/cpu/cpuX/.
It is because get_cpu_device() failed in add_cpu_dev_symlink().
cpufreq_add_dev() is the .add_dev callback of a CPU subsys interface.
It will be called when the CPU device registered into the system.
The call chain is as follows:
register_cpu()
->device_register()
->device_add()
->bus_probe_device()
->cpufreq_add_dev()
But only after the CPU device has been registered, we can get the
CPU device by get_cpu_device(), otherwise it will return NULL.
Since we already have the CPU device in cpufreq_add_dev(), pass
it to add_cpu_dev_symlink().
I noticed that the 'kobj' of the CPU device has been added into
the system before cpufreq_add_dev().
Fixes: 2f0ba790df51 ("cpufreq: Fix creation of symbolic links to policy directories")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On systems with overclocking enabled, CPPC Highest Performance can be
hard coded to 0xff. In this case even if we have cores with different
highest performance, ITMT can't be enabled as the current implementation
depends on CPPC Highest Performance.
On such systems we can use MSR_HWP_CAPABILITIES maximum performance field
when CPPC.Highest Performance is 0xff.
Due to legacy reasons, we can't solely depend on MSR_HWP_CAPABILITIES as
in some older systems CPPC Highest Performance is the only way to identify
different performing cores.
Reported-by: Michael Larabel <Michael@MichaelLarabel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Michael Larabel <Michael@MichaelLarabel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After commit 4adcf2e5829f ("cpufreq: intel_pstate: Add ->offline and
->online callbacks") the EPP value set by the "performance" scaling
algorithm in the active mode is not restored after an offline/online
cycle which replaces it with the saved EPP value coming from user
space.
Address this issue by forcing intel_pstate_hwp_set() to set a new
EPP value when it runs first time after online.
Fixes: 4adcf2e5829f ("cpufreq: intel_pstate: Add ->offline and ->online callbacks")
Link: https://lore.kernel.org/linux-pm/adc7132c8655bd4d1c8b6129578e931a14fe1db2.camel@linux.intel.com/
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit fbdc21e9b038 ("cpufreq: intel_pstate: Add Icelake servers
support in no-HWP mode") enabled the use of Intel P-State driver
for Ice Lake servers.
But it doesn't cover the case when OS can't control P-States.
Therefore, for Ice Lake server, if MSR_MISC_PWR_MGMT bits 8 or 18
are enabled, then the Intel P-State driver should exit as OS can't
control P-States.
Fixes: fbdc21e9b038 ("cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode")
Signed-off-by: Adamos Ttofari <attofari@amazon.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It is possible that some performance excursions happened before OS boot
or enable HWP interrupts. So clear MSR_HWP_STATUS bits when we enable
HWP interrupt. In this way a next excursion will results in a HWP
interrupt.
The status bits of MSR_HWP_STATUS must be cleared (0) by software so
that a new status condition change will cause the hardware to set the
bit again and issue the notification.
Fixes: 57577c996d73 ("cpufreq: intel_pstate: Process HWP Guaranteed change notification")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It is possible that on some platforms HWP interrupts are disabled. In
that case accessing MSR 0x773 will result in warning.
So check X86_FEATURE_HWP_NOTIFY feature to access MSR 0x773. The other
places in code where this MSR is accessed, already checks this feature
except during disable path called during cpufreq offline and suspend
callbacks.
Fixes: 57577c996d73 ("cpufreq: intel_pstate: Process HWP Guaranteed change notification")
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit a365ab6b9dfb ("cpufreq: intel_pstate: Implement the
->adjust_perf() callback") caused intel_pstate to use nonzero HWP
desired values in certain usage scenarios, but it did not prevent
them from being leaked into the confugirations in which HWP desired
is expected to be 0.
The failing scenarios are switching the driver from the passive
mode to the active mode and starting a new kernel via kexec() while
intel_pstate is running in the passive mode.
To address this issue, ensure that HWP desired will be cleared on
offline and suspend/shutdown.
Fixes: a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback")
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Tested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge Energy Model and power capping updates for 5.16-rc1:
- Add support for inefficient operating performance points to the
Energy Model and modify cpufreq to use them properly (Vincent
Donnefort).
- Rearrange the DTPM framework code to simplify it and make it easier
to follow (Daniel Lezcano).
- Fix power intialization in DTPM (Daniel Lezcano).
- Add CPU load consideration when estimating the instaneous power
consumption in DTPM (Daniel Lezcano).
* pm-em:
cpufreq: mediatek-hw: Fix cpufreq_table_find_index_dl() call
PM: EM: Mark inefficiencies in CPUFreq
cpufreq: Use CPUFREQ_RELATION_E in DVFS governors
cpufreq: Introducing CPUFREQ_RELATION_E
cpufreq: Add an interface to mark inefficient frequencies
cpufreq: Make policy min/max hard requirements
PM: EM: Allow skipping inefficient states
PM: EM: Extend em_perf_domain with a flag field
PM: EM: Mark inefficient states
PM: EM: Fix inefficient states detection
* powercap:
powercap/drivers/dtpm: Fix power limit initialization
powercap/drivers/dtpm: Scale the power with the load
powercap/drivers/dtpm: Use container_of instead of a private data field
powercap/drivers/dtpm: Simplify the dtpm table
powercap/drivers/dtpm: Encapsulate even more the code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for 5.16-rc1 from Viresh Kumar:
"- Fix tegra driver to handle BPMP errors properly (Mikko Perttunen).
- Fix the parameter usage of the newly added perf-domain API (Hector
Yuan).
- Minor cleanups to cppc, vexpress and s3c244x drivers (Han Wang,
Guenter Roeck, and Arnd Bergmann)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: Fix parameter in parse_perf_domain()
cpufreq: tegra186/tegra194: Handle errors in BPMP response
cpufreq: remove useless INIT_LIST_HEAD()
cpufreq: s3c244x: add fallthrough comments for switch
cpufreq: vexpress: Drop unused variable
|
|
Fix a problem in active mode that cpu->pstate.turbo_freq is initialized
only if HWP-to-frequency scaling factor is refined.
In passive mode, this problem is not exposed, because
cpu->pstate.turbo_freq is set again, later in
intel_cpufreq_cpu_init()->intel_pstate_get_hwp_cap().
Fixes: eb3693f0521e ("cpufreq: intel_pstate: hybrid: CPU-specific scaling factor")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The new cpufreq table flag RELATION_E introduced a new "efficient"
parameter for the cpufreq_table_find*() functions.
Fixes: 1f39fa0dccff (cpufreq: Introducing CPUFREQ_RELATION_E)
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Let the governors schedutil, conservative and ondemand to work, if possible
on efficient frequencies only.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This newly introduced flag can be applied by a governor to a CPUFreq
relation, when looking for a frequency within the policy table. The
resolution would then only walk through efficient frequencies.
Even with the flag set, the policy max limit will still be honoured. If no
efficient frequencies can be found within the limits of the policy, an
inefficient one would be returned.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When applying the policy min/max limits, the requested frequency is
simply clamped to not be out of range. It means, however, if one of the
boundaries isn't an available frequency, the frequency resolution can
return a value out of those limits, depending on the relation used.
e.g. freq{0,1,2} being available frequencies.
freq0 policy->min freq1 policy->max freq2
| | | | |
17kHz 18kHz 19kHz 20kHz 21kHz
__resolve_freq(21kHz, CPUFREQ_RELATION_L) -> 21kHz (out of bounds)
__resolve_freq(17kHz, CPUFREQ_RELATION_H) -> 17kHz (out of bounds)
If, during the policy init, we resolve the requested min/max to existing
frequencies, we ensure that any CPUFREQ_RELATION_* would resolve to a
frequency which is inside the policy min/max range.
Making the policy limits rigid helps to introduce the inefficient
frequencies support. Resolving an inefficient frequency to an efficient
one should not transgress policy->max (which can be set for thermal
reason) and having a value we can trust simplify this comparison.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It is possible that HWP guaranteed ratio is changed in response to
change in power and thermal limits. For example when Intel Speed Select
performance profile is changed or there is change in TDP, hardware can
send notifications. It is possible that the guaranteed ratio is
increased. This creates an issue when turbo is disabled, as the old
limits set in MSR_HWP_REQUEST are still lower and hardware will clip
to older limits.
This change enables HWP interrupt and process HWP interrupts. When
guaranteed is changed, calls cpufreq_update_policy() so that driver
callbacks are called to update to new HWP limits. This callback
is called from a delayed workqueue of 10ms to avoid frequent updates.
Although the scope of IA32_HWP_INTERRUPT is per logical cpu, on some
plaforms interrupt is generated on all CPUs. This is particularly a
problem during initialization, when the driver didn't allocated
data for other CPUs. So this change uses a cpumask of enabled CPUs and
process interrupts on those CPUs only.
When the cpufreq offline() or suspend() callback is called, HWP interrupt
is disabled on those CPUs and also cancels any pending work item.
Spin lock is used to protect data and processing shared with interrupt
handler. Here READ_ONCE(), WRITE_ONCE() macros are used to designate
shared data, even though spin lock act as an optimization barrier here.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: pablomh@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The return value from tegra_bpmp_transfer indicates the success or
failure of the IPC transaction with BPMP. If the transaction
succeeded, we also need to check the actual command's result code.
Add code to do this.
While at it, explicitly handle missing CPU clusters, which can
occur on floorswept chips. This worked before as well, but
possibly only by accident.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
list cpu_data_list has been inited staticly through LIST_HEAD,
so there's no need to call another INIT_LIST_HEAD. Simply remove
it from cppc_cpufreq_init.
Signed-off-by: Han Wang <zjuwanghan@outlook.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Apparently nobody has so far caught this warning, I hit it in randconfig
build testing:
drivers/cpufreq/s3c2440-cpufreq.c: In function 's3c2440_cpufreq_setdivs':
drivers/cpufreq/s3c2440-cpufreq.c:175:10: error: this statement may fall through [-Werror=implicit-fallthrough=]
camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
^
drivers/cpufreq/s3c2440-cpufreq.c:176:2: note: here
case 3:
^~~~
drivers/cpufreq/s3c2440-cpufreq.c:181:10: error: this statement may fall through [-Werror=implicit-fallthrough=]
camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
^
drivers/cpufreq/s3c2440-cpufreq.c:182:2: note: here
case 4:
^~~~
Both look like the fallthrough is intentional, so add the new
"fallthrough;" keyword.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
arm:allmodconfig fails to build with the following error.
drivers/cpufreq/vexpress-spc-cpufreq.c:454:13: error:
unused variable 'cur_cluster'
Remove the unused variable.
Fixes: bb8c26d9387f ("cpufreq: vexpress: Set CPUFREQ_IS_COOLING_DEV flag")
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq issues, one in the intel_pstate driver and one
in the core.
Specifics:
- Prevent intel_pstate from avoiding to use HWP, even if instructed
to do so via the kernel command line, when HWP has been enabled
already by the platform firmware (Doug Smythies).
- Prevent use-after-free from occurring in the schedutil cpufreq
governor on exit by fixing a core helper function that attempts to
access memory associated with a kobject after calling kobject_put()
on it (James Morse)"
* tag 'pm-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: schedutil: Destroy mutex before kobject_put() frees the memory
cpufreq: intel_pstate: Override parameters if HWP forced by BIOS
|
|
arm:allmodconfig fails to build with the following error.
drivers/cpufreq/vexpress-spc-cpufreq.c:454:13: error:
unused variable 'cur_cluster'
Remove the unused variable.
Fixes: bb8c26d9387f ("cpufreq: vexpress: Set CPUFREQ_IS_COOLING_DEV flag")
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit e5c6b312ce3c ("cpufreq: schedutil: Use kobject release()
method to free sugov_tunables") kobject_put() has kfree()d the
attr_set before gov_attr_set_put() returns.
kobject_put() isn't the last user of attr_set in gov_attr_set_put(),
the subsequent mutex_destroy() triggers a use-after-free:
| BUG: KASAN: use-after-free in mutex_is_locked+0x20/0x60
| Read of size 8 at addr ffff000800ca4250 by task cpuhp/2/20
|
| CPU: 2 PID: 20 Comm: cpuhp/2 Not tainted 5.15.0-rc1 #12369
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development
| Platform, BIOS EDK II Jul 30 2018
| Call trace:
| dump_backtrace+0x0/0x380
| show_stack+0x1c/0x30
| dump_stack_lvl+0x8c/0xb8
| print_address_description.constprop.0+0x74/0x2b8
| kasan_report+0x1f4/0x210
| kasan_check_range+0xfc/0x1a4
| __kasan_check_read+0x38/0x60
| mutex_is_locked+0x20/0x60
| mutex_destroy+0x80/0x100
| gov_attr_set_put+0xfc/0x150
| sugov_exit+0x78/0x190
| cpufreq_offline.isra.0+0x2c0/0x660
| cpuhp_cpufreq_offline+0x14/0x24
| cpuhp_invoke_callback+0x430/0x6d0
| cpuhp_thread_fun+0x1b0/0x624
| smpboot_thread_fn+0x5e0/0xa6c
| kthread+0x3a0/0x450
| ret_from_fork+0x10/0x20
Swap the order of the calls.
Fixes: e5c6b312ce3c ("cpufreq: schedutil: Use kobject release() method to free sugov_tunables")
Cc: 4.7+ <stable@vger.kernel.org> # 4.7+
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If HWP has been already been enabled by BIOS, it may be
necessary to override some kernel command line parameters.
Once it has been enabled it requires a reset to be disabled.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* pm-cpufreq:
cpufreq: intel_pstate: hybrid: Rework HWP calibration
ACPI: CPPC: Introduce cppc_get_nominal_perf()
* pm-sleep:
PM: sleep: core: Avoid setting power.must_resume to false
PM: sleep: wakeirq: drop useless parameter from dev_pm_attach_wake_irq()
* pm-em:
Documentation: power: include kernel-doc in Energy Model doc
PM: EM: fix kernel-doc comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly ARM cpufreq driver updates, including one new
MediaTek driver that has just passed all of the reviews, with the
addition of a revert of a recent intel_pstate commit, some core
cpufreq changes and a DT-related update of the operating performance
points (OPP) support code.
Specifics:
- Add new cpufreq driver for the MediaTek MT6779 platform called
mediatek-hw along with corresponding DT bindings (Hector.Yuan).
- Add DCVS interrupt support to the qcom-cpufreq-hw driver (Thara
Gopinath).
- Make the qcom-cpufreq-hw driver set the dvfs_possible_from_any_cpu
policy flag (Taniya Das).
- Blocklist more Qualcomm platforms in cpufreq-dt-platdev (Bjorn
Andersson).
- Make the vexpress cpufreq driver set the CPUFREQ_IS_COOLING_DEV
flag (Viresh Kumar).
- Add new cpufreq driver callback to allow drivers to register with
the Energy Model in a consistent way and make several drivers use
it (Viresh Kumar).
- Change the remaining users of the .ready() cpufreq driver callback
to move the code from it elsewhere and drop it from the cpufreq
core (Viresh Kumar).
- Revert recent intel_pstate change adding HWP guaranteed performance
change notification support to it that led to problems, because the
notification in question is triggered prematurely on some systems
(Rafael Wysocki).
- Convert the OPP DT bindings to DT schema and clean them up while at
it (Rob Herring)"
* tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
Revert "cpufreq: intel_pstate: Process HWP Guaranteed change notification"
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
cpufreq: Remove ready() callback
cpufreq: sh: Remove sh_cpufreq_cpu_ready()
cpufreq: acpi: Remove acpi_cpufreq_cpu_ready()
cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
cpufreq: scmi: Use .register_em() to register with energy model
cpufreq: vexpress: Use .register_em() to register with energy model
cpufreq: scpi: Use .register_em() to register with energy model
dt-bindings: opp: Convert to DT schema
dt-bindings: Clean-up OPP binding node names in examples
ARM: dts: omap: Drop references to opp.txt
cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model
cpufreq: omap: Use .register_em() to register with energy model
cpufreq: mediatek: Use .register_em() to register with energy model
cpufreq: imx6q: Use .register_em() to register with energy model
...
|
|
The current HWP calibration for hybrid processors in intel_pstate is
fragile, because it depends too much on the information provided by
the platform firmware via CPPC which may not be reliable enough. It
also need not be so complicated.
In order to improve that mechanism and make it more resistant to
platform firmware issues, make it only use the CPPC nominal_perf
values to compute the HWP-to-frequency scaling factors for all
CPUs and possibly use the HWP_CAP highest_perf values to recompute
them if the ones derived from the CPPC nominal_perf values alone
appear to be too high.
Namely, fetch CPC.nominal_perf for all CPUs present in the system,
find the minimum one and use it as a reference for computing all of
the CPUs' scaling factors (using the observation that for the CPUs
having the minimum CPC.nominal_perf the HWP range of available
performance levels should be the same as the range of available
"legacy" P-states and so the HWP-to-frequency scaling factor for
them should be the same as the corresponding scaling factor used
for representing the P-state values in kHz).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull more ARM cpufreq changes for v5.15-rc1 from Viresh Kumar:
"This adds a new cpufreq driver for Mediatek, which had been going
through reviews since last one year."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
|
|
Revert commit d0e936adbd22 ("cpufreq: intel_pstate: Process HWP
Guaranteed change notification"), because it causes a NULL pointer
dereference to occur on Lenovo X1 gen9 laptops due to an HWP
guaranteed performance change interrupt arriving prematurely.
This feature will be revisited in the next cycle.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Introduce cpufreq HW driver which can support
CPU frequency adjust in MT6779 platform.
Signed-off-by: Hector.Yuan <hector.yuan@mediatek.com>
[ Viresh: Massaged the patch and cleaned some stuff. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and
later re-added, are given a CPU number on the same node as
previously, when possible.
- Add support for a new more flexible device-tree format for specifying
NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard,
Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas,
Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel
Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas
Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan
Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R.
Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan
Jiabing, Xiongwei Song, and Zheng Yongjun.
* tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits)
powerpc/bug: Cast to unsigned long before passing to inline asm
powerpc/ptdump: Fix generic ptdump for 64-bit
KVM: PPC: Fix clearing never mapped TCEs in realmode
powerpc/pseries/iommu: Rename "direct window" to "dma window"
powerpc/pseries/iommu: Make use of DDW for indirect mapping
powerpc/pseries/iommu: Find existing DDW with given property name
powerpc/pseries/iommu: Update remove_dma_window() to accept property name
powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper
powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw()
powerpc/pseries/iommu: Allow DDW windows starting at 0x00
powerpc/pseries/iommu: Add ddw_list_new_entry() helper
powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper
powerpc/kernel/iommu: Add new iommu_table_in_use() helper
powerpc/pseries/iommu: Replace hard-coded page shift
powerpc/numa: Update cpu_cpu_map on CPU online/offline
powerpc/numa: Print debug statements only when required
powerpc/numa: convert printk to pr_xxx
powerpc/numa: Drop dbg in favour of pr_debug
powerpc/smp: Enable CACHE domain for shared processor
powerpc/smp: Update cpu_core_map on all PowerPc systems
...
|
|
This isn't used anymore, get rid of it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ->ready() callback is going away and since we don't do any important
stuff in sh_cpufreq_cpu_ready(), remove it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ready() callback was implemented earlier for acpi-cpufreq driver as
we wanted to use policy->cpuinfo.max_freq for which the policy was
required to be verified.
That is no longer the case and we can do the pr_warn() right from
->init() callback now. Remove acpi_cpufreq_cpu_ready().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq driver changes for v5.15 from Viresh Kumar:
"This contains:
- Update cpufreq-dt blocklist with more platforms (Bjorn Andersson).
- Allow freq changes from any CPU for qcom-hw driver (Taniya Das).
- Add DSVS interrupt's support for qcom-hw driver (Thara Gopinath).
- A new callback (->register_em()) to register EM at a more convenient
point of time."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
cpufreq: scmi: Use .register_em() to register with energy model
cpufreq: vexpress: Use .register_em() to register with energy model
cpufreq: scpi: Use .register_em() to register with energy model
cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model
cpufreq: omap: Use .register_em() to register with energy model
cpufreq: mediatek: Use .register_em() to register with energy model
cpufreq: imx6q: Use .register_em() to register with energy model
cpufreq: dt: Use .register_em() to register with energy model
cpufreq: Add callback to register with energy model
cpufreq: vexpress: Set CPUFREQ_IS_COOLING_DEV flag
|
|
As remote cpufreq updates are supported on QCOM platforms, set
dvfs_possible_from_any_cpu cpufreq driver flag.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The Qualcomm sa8155p, sm6350, sm8250 and sm8350 platforms also uses the
qcom-cpufreq-hw driver, so add them to the cpufreq-dt-platdev driver's
blocklist.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add interrupt support to notify the kernel of h/w initiated frequency
throttling by LMh. Convey this to scheduler via thermal presssure
interface.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
[Viresh: Added changes for arch_topology.c to fix build errors ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Set the newly added .register_em() callback to register with the EM
after the cpufreq policy is properly initialized.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Set the newly added .register_em() callback with
cpufreq_register_em_with_opp() to register with the EM core.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Set the newly added .register_em() callback with
cpufreq_register_em_with_opp() to register with the EM core.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
It is possible that HWP guaranteed ratio is changed in response to
change in power and thermal limits. For example when Intel Speed Select
performance profile is changed or there is change in TDP, hardware can
send notifications. It is possible that the guaranteed ratio is
increased. This creates an issue when turbo is disabled, as the old
limits set in MSR_HWP_REQUEST are still lower and hardware will clip
to older limits.
This change enables HWP interrupt and process HWP interrupts. When
guaranteed is changed, calls cpufreq_update_policy() so that driver
callbacks are called to update to new HWP limits. This callback
is called from a delayed workqueue of 10ms to avoid frequent updates.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq fixes for v5.14 from Viresh Kumar:
"This contains:
- Addition of SoCs to blocklist for cpufreq-dt driver (Bjorn Andersson
and Thara Gopinath).
- Fix error path for scmi driver (Lukasz Luba).
- Temporarily disable highest frequency for armada, its unsafe and
breaks stuff."
* 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: armada-37xx: forbid cpufreq for 1.2 GHz variant
cpufreq: blocklist Qualcomm sm8150 in cpufreq-dt-platdev
cpufreq: arm_scmi: Fix error path when allocation failed
cpufreq: blacklist Qualcomm sc8180x in cpufreq-dt-platdev
|
|
In the numa=off kernel command-line configuration init_chip_info() loops
around the number of chips and attempts to copy the cpumask of that node
which is NULL for all iterations after the first chip.
Hence, store the cpu mask for each chip instead of derving cpumask from
node while populating the "chips" struct array and copy that to the
chips[i].mask
Fixes: 053819e0bf84 ("cpufreq: powernv: Handle throttling due to Pmax capping at chip level")
Cc: stable@vger.kernel.org # v4.3+
Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
Signed-off-by: Pratik R. Sampat <psampat@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
[mpe: Rename goto label to out_free_chip_cpu_mask]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210728120500.87549-2-psampat@linux.ibm.com
|
|
Set the newly added .register_em() callback with
cpufreq_register_em_with_opp() to register with the EM core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Set the newly added .register_em() callback with
cpufreq_register_em_with_opp() to register with the EM core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Set the newly added .register_em() callback with
cpufreq_register_em_with_opp() to register with the EM core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Set the newly added .register_em() callback with
cpufreq_register_em_with_opp() to register with the EM core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Set the newly added .register_em() callback with
cpufreq_register_em_with_opp() to register with the EM core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
