summaryrefslogtreecommitdiff
path: root/drivers/crypto/caam/Makefile
AgeCommit message (Collapse)Author
2022-05-27Merge tag 'v5.19-p1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Test in-place en/decryption with two sglists in testmgr - Fix process vs softirq race in cryptd Algorithms: - Add arm64 acceleration for sm4 - Add s390 acceleration for chacha20 Drivers: - Add polarfire soc hwrng support in mpsf - Add support for TI SoC AM62x in sa2ul - Add support for ATSHA204 cryptochip in atmel-sha204a - Add support for PRNG in caam - Restore support for storage encryption in qat - Restore support for storage encryption in hisilicon/sec" * tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits) hwrng: omap3-rom - fix using wrong clk_disable() in omap_rom_rng_runtime_resume() crypto: hisilicon/sec - delete the flag CRYPTO_ALG_ALLOCATES_MEMORY crypto: qat - add support for 401xx devices crypto: qat - re-enable registration of algorithms crypto: qat - honor CRYPTO_TFM_REQ_MAY_SLEEP flag crypto: qat - add param check for DH crypto: qat - add param check for RSA crypto: qat - remove dma_free_coherent() for DH crypto: qat - remove dma_free_coherent() for RSA crypto: qat - fix memory leak in RSA crypto: qat - add backlog mechanism crypto: qat - refactor submission logic crypto: qat - use pre-allocated buffers in datapath crypto: qat - set to zero DH parameters before free crypto: s390 - add crypto library interface for ChaCha20 crypto: talitos - Uniform coding style with defined variable crypto: octeontx2 - simplify the return expression of otx2_cpt_aead_cbc_aes_sha_setkey() crypto: cryptd - Protect per-CPU resource by disabling BH. crypto: sun8i-ce - do not fallback if cryptlen is less than sg length crypto: sun8i-ce - rework debugging ...
2022-05-23crypto: caam - add in-kernel interface for blob generatorAhmad Fatoum
The NXP Cryptographic Acceleration and Assurance Module (CAAM) can be used to protect user-defined data across system reboot: - When the system is fused and boots into secure state, the master key is a unique never-disclosed device-specific key - random key is encrypted by key derived from master key - data is encrypted using the random key - encrypted data and its encrypted random key are stored alongside - This blob can now be safely stored in non-volatile memory On next power-on: - blob is loaded into CAAM - CAAM writes decrypted data either into memory or key register Add functions to realize encrypting and decrypting into memory alongside the CAAM driver. They will be used in a later commit as a source for the trusted key seal/unseal mechanism. Reviewed-by: David Gstir <david@sigma-star.at> Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Tested-by: Pankaj Gupta <pankaj.gupta@nxp.com> Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E) Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2022-05-06crypto: caam/rng - Add support for PRNGMeenakshi Aggarwal
Add support for random number generation using PRNG mode of CAAM and expose the interface through crypto API. According to the RM, the HW implementation of the DRBG follows NIST SP 800-90A specification for DRBG_Hash SHA-256 function Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Horia Geant <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-08-21crypto: caam - Move debugfs fops into standalone fileHoria Geantă
Currently the debugfs fops are defined in caam/intern.h. This causes problems because it creates identical static functions and variables in multiple files. It also creates warnings when those files don't use the fops. This patch moves them into a standalone file, debugfs.c. It also removes unnecessary uses of ifdefs on CONFIG_DEBUG_FS. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> [Moved most of debugfs-related operations into debugfs.c.] Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-08-02crypto: caam/qi2 - Add printing dpseci fq stats using debugfsVakul Garg
Add support of printing the dpseci frame queue statistics using debugfs. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-23crypto: caam - convert top level drivers to librariesHoria Geantă
Currently we allow top level code, i.e. that which sits between the low level (HW-specific) drivers and crypto API, to be built as several drivers: caamalg, caamhash, caam_pkc, caamrng, caamalg_qi. There is no advantage in this, more it interferes with adding support for deferred probing (there are no corresponding devices and thus no bus). Convert these drivers and call init() / exit() manually at the right time. Move algorithms initialization at JR probe / remove time: -the first probed JR registers the crypto algs -the last removed JR unregisters the crypto algs Note: caam_qi_init() is called before JR platform devices creation (of_populate_bus()), such that QI interface is initialized when the caam/qi algorithms are registered in the JR driver (by calling caam_qi_algapi_init(). While here, fix the Kconfig entries under CRYPTO_DEV_FSL_CAAM_JR to be aligned. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-21crypto: caam - export ahash shared descriptor generationHoria Geantă
caam/qi2 driver will support ahash algorithms, thus move ahash descriptors generation in a shared location. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-21crypto: caam/qi2 - add DPAA2-CAAM driverHoria Geantă
Add CAAM driver that works using the DPSECI backend, i.e. manages DPSECI DPAA2 objects sitting on the Management Complex (MC) fsl-mc bus. Data transfers (crypto requests) are sent/received to/from CAAM crypto engine via Queue Interface (v2), this being similar to existing caam/qi. OTOH, configuration/setup (obtaining virtual queue IDs, authorization etc.) is done by sending commands to the MC f/w. Note that the CAAM accelerator included in DPAA2 platforms still has Job Rings. However, the driver being added does not handle access via this backend. Kconfig & Makefile are updated such that DPAA2-CAAM (a.k.a. "caam/qi2") driver does not depend on caam/jr or caam/qi backends - which rely on platform bus support (ctrl.c). Support for the following aead and authenc algorithms is also added in this patch: -aead: gcm(aes) rfc4106(gcm(aes)) rfc4543(gcm(aes)) -authenc: authenc(hmac({md5,sha*}),cbc({aes,des,des3_ede})) echainiv(authenc(hmac({md5,sha*}),cbc({aes,des,des3_ede}))) authenc(hmac({md5,sha*}),rfc3686(ctr(aes)) seqiv(authenc(hmac({md5,sha*}),rfc3686(ctr(aes))) Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-24crypto: caam/qi - add ablkcipher and authenc algorithmsHoria Geantă
Add support to submit ablkcipher and authenc algorithms via the QI backend: -ablkcipher: cbc({aes,des,des3_ede}) ctr(aes), rfc3686(ctr(aes)) xts(aes) -authenc: authenc(hmac(md5),cbc({aes,des,des3_ede})) authenc(hmac(sha*),cbc({aes,des,des3_ede})) caam/qi being a new driver, let's wait some time to settle down without interfering with existing caam/jr driver. Accordingly, for now all caam/qi algorithms (caamalg_qi module) are marked to be of lower priority than caam/jr ones (caamalg module). Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24crypto: caam - add Queue Interface (QI) backend supportHoria Geantă
CAAM engine supports two interfaces for crypto job submission: -job ring interface - already existing caam/jr driver -Queue Interface (QI) - caam/qi driver added in current patch QI is present in CAAM engines found on DPAA platforms. QI gets its I/O (frame descriptors) from QMan (Queue Manager) queues. This patch adds a platform device for accessing CAAM's queue interface. The requests are submitted to CAAM using one frame queue per cryptographic context. Each crypto context has one shared descriptor. This shared descriptor is attached to frame queue associated with corresponding driver context using context_a. The driver hides the mechanics of FQ creation, initialisation from its applications. Each cryptographic context needs to be associated with driver context which houses the FQ to be used to transport the job to CAAM. The driver provides API for: (a) Context creation (b) Job submission (c) Context deletion (d) Congestion indication - whether path to/from CAAM is congested The driver supports affining its context to a particular CPU. This means that any responses from CAAM for the context in question would arrive at the given CPU. This helps in implementing one CPU per packet round trip in IPsec application. The driver processes CAAM responses under NAPI contexts. NAPI contexts are instantiated only on cores with affined portals since only cores having their own portal can receive responses from DQRR. The responses from CAAM for all cryptographic contexts ride on a fixed set of FQs. We use one response FQ per portal owning core. The response FQ is configured in each core's and thus portal's dedicated channel. This gives the flexibility to direct CAAM's responses for a crypto context on a given core. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-11-28crypto: caam - refactor encryption descriptors generationHoria Geantă
Refactor the generation of the authenc, ablkcipher shared descriptors and exports the functionality, such that they could be shared with the upcoming caam/qi (Queue Interface) driver. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-05crypto: caam - add support for RSA algorithmTudor Ambarus
Add RSA support to caam driver. Initial author is Yashpal Dutta <yashpal.dutta@freescale.com>. Signed-off-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-20crypto: caam - replace deprecated EXTRA_CFLAGSTudor Ambarus
EXTRA_CFLAGS is still supported but its usage is deprecated. Signed-off-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-10-30crypto: caam - Add Platform driver for Job RingRuchika Gupta
The SEC Job Rings are now available as individual devices. This would enable sharing of job rings between kernel and user space. Job Rings can now be dynamically bound/unbound from kernel. Changes are made in the following layers of CAAM Driver 1. Controller driver - Does basic initialization of CAAM Block. - Creates platform devices for Job Rings. (Earlier the initialization of Job ring was done by the controller driver) 2. JobRing Platform driver - Manages the platform Job Ring devices created by the controller driver Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: Garg Vakul-B16394 <vakul@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-08-21crypto: caam - add option for enabling DEBUG modeAlex Porosanu
This patch adds an option to the Kconfig file for SEC which enables the user to see the debug messages that are printed inside the SEC driver. Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - hwrng supportYuan Kang
caam_read copies random bytes from two buffers into output. caam rng can fill empty buffer 0xffff bytes at a time, but the buffer sizes are rounded down to multiple of cacheline size. Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - ahash hmac supportYuan Kang
caam supports ahash hmac with sha algorithms and md5. Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - refactor key_gen, sgYuan Kang
create separate files for split key generation and scatterlist functions. Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-03-27crypto: caam - Add support for the Freescale SEC4/CAAMKim Phillips
The SEC4 supercedes the SEC2.x/3.x as Freescale's Integrated Security Engine. Its programming model is incompatible with all prior versions of the SEC (talitos). The SEC4 is also known as the Cryptographic Accelerator and Assurance Module (CAAM); this driver is named caam. This initial submission does not include support for Data Path mode operation - AEAD descriptors are submitted via the job ring interface, while the Queue Interface (QI) is enabled for use by others. Only AEAD algorithms are implemented at this time, for use with IPsec. Many thanks to the Freescale STC team for their contributions to this driver. Signed-off-by: Steve Cornelius <sec@pobox.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>