summaryrefslogtreecommitdiff
path: root/drivers/devfreq
AgeCommit message (Collapse)Author
2021-06-24PM / devfreq: passive: Fix get_target_freq when not using required-oppChanwoo Choi
The 86ad9a24f21e ("PM / devfreq: Add required OPPs support to passive governor") supported the required-opp property for using devfreq passive governor. But, 86ad9a24f21e has caused the problem on use-case when required-opp is not used such as exynos-bus.c devfreq driver. So that fix the get_target_freq of passive governor for supporting the case of when required-opp is not used. Fixes: 86ad9a24f21e ("PM / devfreq: Add required OPPs support to passive governor") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-17PM / devfreq: userspace: Use DEVICE_ATTR_RW macroYueHaibing
Use DEVICE_ATTR_RW helper instead of plain DEVICE_ATTR, which makes the code a bit shorter and easier to read. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-05-21PM / devfreq: imx8m-ddrc: Remove DEVFREQ_GOV_SIMPLE_ONDEMAND dependencyDong Aisheng
The driver can't support simple ondemand governor due to missing .get_dev_status() capability. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-05-21PM / devfreq: tegra30: Support thermal coolingDmitry Osipenko
Expose ACTMON devfreq device as a cooling device in order to throttle memory freq on overheat. Throttling of memory freq has a significant cooling effect on NVIDIA Tegra SoCs since higher memory freqs require higher SoC core voltage which is one of the main causes of the heating. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-05-21PM / devfreq: imx-bus: Remove imx_bus_get_dev_statusDong Aisheng
Current driver actually does not support simple ondemand governor as it's unable to provide device load information. So removing the unnecessary callback to avoid confusing. Right now the driver is using userspace governor by default. polling_ms was also dropped as it's not needed for non-ondemand governor. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-05-20PM / devfreq: Add missing error code in devfreq_add_device()YueHaibing
Set err code in the error path before jumping to the end of the function. Fixes: 4dc3bab8687f ("PM / devfreq: Add support delayed timer for polling mode") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08PM / devfreq: imx8m-ddrc: Remove unneeded of_match_ptr()Fabio Estevam
i.MX is a DT-only platform, so of_match_ptr() can be safely removed. Remove the unneeded of_match_ptr(). Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08PM / devfreq: imx-bus: Remove unneeded of_match_ptr()Fabio Estevam
i.MX is a DT-only platform, so of_match_ptr() can be safely removed. Remove the unneeded of_match_ptr(). Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08PM / devfreq: imx8m-ddrc: Remove imx8m_ddrc_get_dev_statusDong Aisheng
Current driver actually does not support simple ondemand governor as it's unable to provide device load information. So removing the unnecessary callback to avoid confusing. Right now the driver is using userspace governor by default. polling_ms was also dropped as it's not needed for non-ondemand governor. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08PM / devfreq: Remove the invalid description for get_target_freqDong Aisheng
First of all, no_central_polling was removed since commit 7e6fdd4bad03 ("PM / devfreq: Core updates to support devices which can idle") Secondly, get_target_freq() is not only called only with update_devfreq() notified by OPP now, but also min/max freq qos notifier. So remove this invalid description now to avoid confusing. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08PM / devfreq: Check get_dev_status in devfreq_update_statsDong Aisheng
Check .get_dev_status() in devfreq_update_stats in case it's abused when a device does not provide it. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08PM / devfreq: Fix the wrong set_freq path for userspace governor in KconfigDong Aisheng
Fix the wrong set_freq path for userspace governor in Kconfig. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08PM / devfreq: rk3399_dmc: Simplify with dev_err_probe()Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08PM / devfreq: Use more accurate returned new_freq as resume_freqDong Aisheng
Use the more accurate returned new_freq as resume_freq. It's the same as how devfreq->previous_freq was updated. Fixes: 83f8ca45afbf0 ("PM / devfreq: add support for suspend/resume of a devfreq device") Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08PM / devfreq: Unlock mutex and free devfreq struct in error pathLukasz Luba
The devfreq->lock is held for time of setup. Release the lock in the error path, before jumping to the end of the function. Change the goto destination which frees the allocated memory. Cc: v5.9+ <stable@vger.kernel.org> # v5.9+ Fixes: 4dc3bab8687f ("PM / devfreq: Add support delayed timer for polling mode") Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-09PM / devfreq: Register devfreq as a cooling device on demandDaniel Lezcano
Currently the default behavior is to manually having the devfreq backend to register themselves as a devfreq cooling device. Instead of adding the code in the drivers for the thermal cooling device registering, let's provide a flag in the devfreq's profile to tell the common devfreq code to register the newly created devfreq as a cooling device. Suggested-by: Chanwoo Choi <cwchoi00@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-02-15Merge branches 'pm-devfreq' and 'pm-tools'Rafael J. Wysocki
* pm-devfreq: PM / devfreq: rk3399_dmc: Remove unneeded semicolon PM / devfreq: Replace devfreq->dev.parent as dev in devfreq_add_device PM / devfreq: Correct spelling in a comment * pm-tools: cpupower: Add cpuid cap flag for MSR_AMD_HWCR support cpupower: Remove family arg to decode_pstates() cpupower: Condense pstate enabled bit checks in decode_pstates() cpupower: Update family checks when decoding HW pstates cpupower: Remove unused pscur variable. cpupower: Add CPUPOWER_CAP_AMD_HW_PSTATE cpuid caps flag cpupower: Correct macro name for CPB caps flag cpupower: Update msr_pstate union struct naming cpupower: add Makefile dependencies for install targets
2021-02-04PM / devfreq: Add required OPPs support to passive governorSaravana Kannan
Look at the required OPPs of the "parent" device to determine the OPP that is required from the slave device managed by the passive governor. This allows having mappings between a parent device and a slave device even when they don't have the same number of OPPs. While at it do a minor spell-fix and remove out label. Signed-off-by: Saravana Kannan <saravanak@google.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> [ Viresh: Rearranged code and clean error paths ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-04PM / devfreq: Cache OPP table reference in devfreqSaravana Kannan
The OPP table can be used often in devfreq. Trying to get it each time can be expensive, so cache it in the devfreq struct. Signed-off-by: Saravana Kannan <saravanak@google.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> [ Viresh: Added a blank line ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02PM / devfreq: rk3399_dmc: Remove unneeded semicolonYang Li
Eliminate the following coccicheck warning: ./drivers/devfreq/rk3399_dmc.c:403:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-02-02devfreq: tegra30: Migrate to dev_pm_opp_set_opp()Viresh Kumar
dev_pm_opp_set_bw() is getting removed and dev_pm_opp_set_opp() should be used instead. Migrate to the new API. We don't want the OPP core to manage the clk for this driver, migrate to dev_pm_opp_of_add_table_noclk() to make sure dev_pm_opp_set_opp() doesn't have any side effects. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-01-05PM / devfreq: Replace devfreq->dev.parent as dev in devfreq_add_devicepierre Kuo
In devfreq_add_device, replace devfreq->dev.parent as dev to keep code simple. Signed-off-by: pierre Kuo <vichy.kuo@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-01-05PM / devfreq: Correct spelling in a commentLukasz Luba
The device attribute exposed in sysfs is called 'polling_interval'. Align the comment. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-12-15Merge branches 'pm-devfreq' and 'pm-tools'Rafael J. Wysocki
* pm-devfreq: PM / devfreq: tegra30: Separate configurations per-SoC generation PM / devfreq: tegra30: Support interconnect and OPPs from device-tree PM / devfreq: tegra20: Deprecate in a favor of emc-stat based driver PM / devfreq: exynos-bus: Add registration of interconnect child device dt-bindings: devfreq: Add documentation for the interconnect properties soc/tegra: fuse: Add stub for tegra_sku_info soc/tegra: fuse: Export tegra_read_ram_code() clk: tegra: Export Tegra20 EMC kernel symbols PM / devfreq: tegra30: Silence deferred probe error PM / devfreq: tegra20: Relax Kconfig dependency PM / devfreq: tegra20: Silence deferred probe error PM / devfreq: Remove redundant governor_name from struct devfreq PM / devfreq: Add governor attribute flag for specifc sysfs nodes PM / devfreq: Add governor feature flag PM / devfreq: Add tracepoint for frequency changes PM / devfreq: Unify frequency change to devfreq_update_target func trace: events: devfreq: Use fixed indentation size to improve readability * pm-tools: pm-graph v5.8 cpupower: Provide online and offline CPU information
2020-12-09PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argumentViresh Kumar
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so there is no need for us to carry the extra check. Drop them. Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-07PM / devfreq: tegra30: Separate configurations per-SoC generationDmitry Osipenko
Previously we were using count-weight of the T124 for T30 in order to get EMC clock rate that was reasonable for T30. In fact the count-weight should be x2 times smaller on T30, but then devfreq was producing a bit too low EMC clock rate for ISO memory clients, like display controller for example. Now both Tegra ACTMON and Tegra DRM display drivers support interconnect framework and display driver tells to ICC what a minimum memory bandwidth is needed, preventing FIFO underflows. Thus, now we can use a proper count-weight value for Tegra30 and MC_ALL device config needs a bit more aggressive boosting. Add a separate ACTMON driver configuration that is specific to Tegra30. Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-12-07PM / devfreq: tegra30: Support interconnect and OPPs from device-treeDmitry Osipenko
This patch moves ACTMON driver away from generating OPP table by itself, transitioning it to use the table which comes from device-tree. This change breaks compatibility with older device-trees and brings support for the interconnect framework to the driver. This is a mandatory change which needs to be done in order to implement interconnect-based memory DVFS, i.e. device-trees need to be updated. Now ACTMON issues a memory bandwidth requests using dev_pm_opp_set_bw() instead of driving EMC clock rate directly. Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-11-23PM / devfreq: tegra20: Deprecate in a favor of emc-stat based driverDmitry Osipenko
Remove tegra20-devfreq in order to replace it with a EMC_STAT based devfreq driver. Previously we were going to use MC_STAT based tegra20-devfreq driver because EMC_STAT wasn't working properly, but now that problem is resolved. This resolves complications imposed by the removed driver since it was depending on both EMC and MC drivers simultaneously. Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-11-13PM / devfreq: exynos-bus: Add registration of interconnect child deviceSylwester Nawrocki
This patch adds registration of a child platform device for the exynos interconnect driver. It is assumed that the interconnect provider will only be needed when #interconnect-cells property is present in the bus DT node, hence the child device will be created only when such a property is present. Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26PM / devfreq: tegra30: Silence deferred probe errorDmitry Osipenko
Tegra EMC driver was turned into a regular kernel driver, meaning that it could be compiled as a loadable kernel module now. Hence EMC clock isn't guaranteed to be available and clk_get("emc") may return -EPROBE_DEFER. Let's silence the deferred probe error. Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26PM / devfreq: tegra20: Relax Kconfig dependencyDmitry Osipenko
The Tegra EMC driver now could be compiled as a loadable kernel module. Currently devfreq driver depends on the EMC/MC drivers in Kconfig, and thus, devfreq is forced to be a kernel module if EMC is compiled as a module. This build dependency could be relaxed since devfreq driver checks MC/EMC presence on probe, allowing kernel configuration where devfreq is a built-in driver and EMC driver is a loadable module. This change puts Tegra20 devfreq Kconfig entry on a par with the Tegra30 devfreq entry. Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26PM / devfreq: tegra20: Silence deferred probe errorDmitry Osipenko
Tegra EMC driver was turned into a regular kernel driver, meaning that it could be compiled as a loadable kernel module now. Hence EMC clock isn't guaranteed to be available and clk_get("emc") may return -EPROBE_DEFER. Let's silence the deferred probe error. Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26PM / devfreq: Remove redundant governor_name from struct devfreqChanwoo Choi
The devfreq structure instance contains the governor_name and a governor instance. When need to show the governor name, better to use the name of devfreq_governor structure. So, governor_name variable in struct devfreq is a redundant and unneeded variable. Remove the redundant governor_name of struct devfreq and then use the name of devfreq_governor instance. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26PM / devfreq: Add governor attribute flag for specifc sysfs nodesChanwoo Choi
DEVFREQ supports the default governors like performance, simple_ondemand and also allows the devfreq driver to add their own governor like tegra30-devfreq.c according to their requirement. In result, some sysfs attributes are useful or not useful. Prior to that the user can access all sysfs attributes regardless of the available attributes. So, clarify the access permission of sysfs attributes according to governor. When adding the devfreq governor, can specify the available attribute information by using DEVFREQ_GOV_ATTR_* constant variable. The user can read or write the sysfs attributes in accordance to the specified attributes. When adding the governor, can add the following attributes according to the governor feature. [Definition for speific sysfs attributes] - DEVFREQ_GOV_ATTR_POLLING_INTERVAL to update polling interval for timer. : /sys/class/devfreq/[devfreq dev name]/polling_interval - DEVFREQ_GOV_ATTR_TIMER to change the type of timer on either deferrable or dealyed timer. : /sys/class/devfreq/[devfreq dev name]/timer And all devfreq governors have to support the following common attributes. The common attributes are added to devfreq class by default. - governor - available_governors - available_frequencies - cur_freq - target_freq - min_freq - max_freq - trans_stat [Table of governor attribute flags for devfreq governors] ------------------------------------------------------------------------------ | simple | perfor | power | user | passive | tegra30 | ondemand | mance | save | space| | ------------------------------------------------------------------------------ governor | O | O | O | O | O | O available_governors | O | O | O | O | O | O available_frequencies | O | O | O | O | O | O cur_freq | O | O | O | O | O | O target_freq | O | O | O | O | O | O min_freq | O | O | O | O | O | O max_freq | O | O | O | O | O | O trans_stat | O | O | O | O | O | O -------------------------------------------------------- polling_interval | O | X | X | X | X | O timer | O | X | X | X | X | X ------------------------------------------------------------------------------ Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26PM / devfreq: Add governor feature flagChanwoo Choi
The devfreq governor is able to have the specific flag as follows in order to implement the specific feature. For example, devfreq allows user to change the governors on runtime via sysfs interface. But, if devfreq device uses 'passive' governor, don't allow user to change the governor. For this case, define the DEVFREQ_GOV_FLAG_IMMUTABLE and set it to flag of passive governor. [Definition for governor flag] - DEVFREQ_GOV_FLAG_IMMUTABLE : If immutable flag is set, governor is never changeable to other governors. - DEVFREQ_GOV_FLAG_IRQ_DRIVEN : Devfreq core won't schedule polling work for this governor if value is set. [Table of governor flag for devfreq governors] ------------------------------------------------------------------------------ | simple | perfor | power | user | passive | tegra30 | ondemand | mance | save | space| | ------------------------------------------------------------------------------ immutable | X | X | X | X | O | O interrupt_driven | X(polling)| X | X | X | X | O (irq) ------------------------------------------------------------------------------ Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26PM / devfreq: Add tracepoint for frequency changesMatthias Kaehlcke
Add a tracepoint for frequency changes of devfreq devices and use it. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> [cw00.choi: Move print position of tracepoint and add more information] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26PM / devfreq: Unify frequency change to devfreq_update_target funcChanwoo Choi
The update_devfreq() and update_passive_devfreq() have the duplicate code when changing the target frequency on final stage. So, unify frequency change code to devfreq_update_target() to remove the duplicate code and to centralize the frequency change code. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-29PM / devfreq: tegra30: Improve initial hardware resettingDmitry Osipenko
It's safe to enable the ACTMON clock at any time during driver probing, even if we don't know the state of hardware, because it's used only for collecting and processing stats, and interrupt is kept disabled. This allows us to slightly improve code which performs initial hardware resetting by making use of a single reset_control_reset() instead of assert/deassert pair. Secondly, a potential error of the reset-control API is handled nicely now. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-29PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle ↵Chanwoo Choi
function Previously, devfreq core support 'devfreq-events' property in order to get the devfreq-event device by phandle. But, 'devfreq-events' property name is not proper on devicetree binding because this name doesn't mean the any h/w attribute. The devfreq-event core hand over the rights to decide the property name for getting the devfreq-event device on devicetree. Each devfreq-event driver will decide the property name on devicetree binding and then pass the their own property name to devfreq_event_get_edev_by_phandle function. And change the prototype of devfreq_event_get_edev_count function because of used deprecated 'devfreq-events' property. Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-29PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle functionChanwoo Choi
Previously, devfreq core support 'devfreq' property in order to get the devfreq device by phandle. But, 'devfreq' property name is not proper on devicetree binding because this name doesn't mean the any h/w attribute. The devfreq core hand over the right to decide the property name for getting the devfreq device on devicetree. Each devfreq driver will decide the property name on devicetree binding and pass the their own property name to devfreq_get_devfreq_by_phandle function. Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-29PM / devfreq: Add devfreq_get_devfreq_by_node functionLeonard Crestez
Split off part of devfreq_get_devfreq_by_phandle into a separate function. This allows callers to fetch devfreq instances by enumerating devicetree instead of explicit phandles. Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> [cw00.choi: Export devfreq_get_devfreq_by_node function and add function to devfreq.h when CONFIG_PM_DEVFREQ is enabled.] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-23PM / devfreq: tegra30: Disable clock on error in probeDan Carpenter
This error path needs to call clk_disable_unprepare(). Fixes: 7296443b900e ("PM / devfreq: tegra30: Handle possible round-rate error") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-23PM / devfreq: Add timer type to devfreq_summary debugfsChanwoo Choi
The commit 4dc3bab8687f ("PM / devfreq: Add support delayed timer for polling mode") supports the delayed timer but this commit missed the adding the timer type to devfreq_summary debugfs node. Add the timer type to devfreq_summary debugfs. Fixes: 4dc3bab8687f ("PM / devfreq: Add support delayed timer for polling mode") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: Fix the wrong end with semicolonChanwoo Choi
Fix the wrong grammar at the end of code line by using semicolon. Cc: stable vger.kernel.org Fixes: 490a421bc575 ("PM / devfreq: Add debugfs support with devfreq_summary file") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: Fix indentaion of devfreq_summary debugfs nodeChanwoo Choi
The commit 66d0e797bf09 ("Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"") roll back the device name from 'devfreqX' to device name explained in DT. After applied commit 66d0e797bf09, the indentation of devfreq_summary debugfs node was broken. So, fix indentaion of devfreq_summary debugfs node as following: For example on Exynos5422-based Odroid-XU3 board, $ cat /sys/kernel/debug/devfreq/devfreq_summary dev parent_dev governor polling_ms cur_freq_Hz min_freq_Hz max_freq_Hz ------------------------------ ------------------------------ --------------- ---------- ------------ ------------ ------------ 10c20000.memory-controller null simple_ondemand 0 413000000 165000000 825000000 soc:bus_wcore null simple_ondemand 50 88700000 88700000 532000000 soc:bus_noc soc:bus_wcore passive 0 66600000 66600000 111000000 soc:bus_fsys_apb soc:bus_wcore passive 0 111000000 111000000 222000000 soc:bus_fsys soc:bus_wcore passive 0 75000000 75000000 200000000 soc:bus_fsys2 soc:bus_wcore passive 0 75000000 75000000 200000000 soc:bus_mfc soc:bus_wcore passive 0 83250000 83250000 333000000 soc:bus_gen soc:bus_wcore passive 0 88700000 88700000 266000000 soc:bus_peri soc:bus_wcore passive 0 66600000 66600000 66600000 soc:bus_g2d soc:bus_wcore passive 0 83250000 83250000 333000000 soc:bus_g2d_acp soc:bus_wcore passive 0 0 66500000 266000000 soc:bus_jpeg soc:bus_wcore passive 0 0 75000000 300000000 soc:bus_jpeg_apb soc:bus_wcore passive 0 0 83250000 166500000 soc:bus_disp1_fimd soc:bus_wcore passive 0 0 120000000 200000000 soc:bus_disp1 soc:bus_wcore passive 0 0 120000000 300000000 soc:bus_gscl_scaler soc:bus_wcore passive 0 0 150000000 300000000 soc:bus_mscl soc:bus_wcore passive 0 0 84000000 666000000 Cc: stable@vger.kernel.org Fixes: 66d0e797bf09 ("Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: Clean up the devfreq instance name in sysfs attrChanwoo Choi
The sysfs attr interface used eithere 'df' or 'devfreq' for devfreq instance name. In order to keep the consistency and to improve the readabilty, unify the instance name as 'df'. Add add the missing conditional statement to prevent the fault. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: Add support delayed timer for polling modeChanwoo Choi
Until now, the devfreq driver using polling mode like simple_ondemand governor have used only deferrable timer for reducing the redundant power consumption. It reduces the CPU wake-up from idle due to polling mode which check the status of Non-CPU device. But, it has a problem for Non-CPU device like DMC device with DMA operation. Some Non-CPU device need to do monitor continuously regardless of CPU state in order to decide the proper next status of Non-CPU device. So, add support the delayed timer for polling mode to support the repetitive monitoring. The devfreq driver and user can select the kind of timer on either deferrable and delayed timer. For example, change the timer type of DMC device based on Exynos5422-based Odroid-XU3 as following: - If want to use deferrable timer as following: echo deferrable > /sys/class/devfreq/10c20000.memory-controller/timer - If want to use delayed timer as following: echo delayed > /sys/class/devfreq/10c20000.memory-controller/timer Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: event: Fix trivial spellingKieran Bingham
The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptors -> descriptors Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absentMarc Zyngier
Booting a recent kernel on a rk3399-based system (nanopc-t4), equipped with a recent u-boot and ATF results in an Oops due to a NULL pointer dereference. This turns out to be due to the rk3399-dmc driver looking for an *undocumented* property (rockchip,pmu), and happily using a NULL pointer when the property isn't there. Instead, make most of what was brought in with 9173c5ceb035 ("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.") conditioned on finding this property in the device-tree, preventing the driver from exploding. Cc: stable@vger.kernel.org Fixes: 9173c5ceb035 ("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.") Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-28PM / devfreq: Use lockdep asserts instead of manual checks for locked mutexKrzysztof Kozlowski
Instead of warning when mutex_is_locked(), just use the lockdep framework. The code is smaller and checks could be disabled for production environments (it is useful only during development). Put asserts at beginning of function, even before validating arguments. The behavior of update_devfreq() is now changed because lockdep assert will only print a warning, not return with EINVAL. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>