summaryrefslogtreecommitdiff
path: root/drivers/devfreq
AgeCommit message (Collapse)Author
2016-10-10PM / devfreq: exynos-nocp: Remove redundant codeAxel Lin
load_count/total_count are reset by devfreq_event_get_event(), so remove the redundant code in exynos_nocp_get_event(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> [ rjw: Subject/changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-10PM / devfreq: exynos-nocp: Select REGMAP_MMIOAxel Lin
This driver uses devm_regmap_init_mmio(), so select REGMAP_MMIO to avoid build failure. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-19PM / devfreq: rk3399_dmc: Remove explictly regulator_put call in .removeAxel Lin
Current code uses devm_regulator_get() in .probe so a regulator_put() will be automatically called when unload the module. Remove the explictly regulator_put() call and then we can also remove rk3399_dmcfreq_remove(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-19PM / devfreq: rockchip: add PM_DEVFREQ_EVENT dependencyArnd Bergmann
The newly added ARM_RK3399_DMC_DEVFREQ driver requires the DEVFREQ_EVENT_ROCKCHIP_DFI driver and tries to turn that on through a 'select' statement, and that in turn has a dependency on PM_DEVFREQ_EVENT, which may be disabled here: warning: (ARM_RK3399_DMC_DEVFREQ) selects DEVFREQ_EVENT_ROCKCHIP_DFI which has unmet direct dependencies (PM_DEVFREQ && PM_DEVFREQ_EVENT && ARCH_ROCKCHIP) We probably want a 'depends on' here, but other drivers use 'select' too, so for consistency I'm doing the same. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 5a893e31a636 (PM / devfreq: rockchip: add devfreq driver for rk3399 dmc) Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-14partial revert of "PM / devfreq: Add COMPILE_TEST for build coverage"Stephen Rothwell
This reverts the Tegra part of commit 797da5598f3a (PM / devfreq: Add COMPILE_TEST for build coverage) that introduced a build failute in in linux-next. [ rjw: Changelog ] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-06PM / devfreq: rockchip: add devfreq driver for rk3399 dmcLin Huang
base on dfi result, we do ddr frequency scaling, register dmc driver to devfreq framework, and use simple-ondemand policy. Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: MyngJoo Ham <myngjoo.ham@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-06PM / devfreq: event: support rockchip dfi controllerLin Huang
on rk3399 platform, there is dfi conroller can monitor ddr load, base on this result, we can do ddr freqency scaling. Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-06PM / devfreq: fix Kconfig indent styleJisheng Zhang
Use tab rather than space to indent, and tab + two spaces to indent help message. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-09-06PM / devfreq: Add COMPILE_TEST for build coverageKrzysztof Kozlowski
The SoC-specific devfreq and devfreq-event drivers can be build tested on all architectures. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-09-06PM / devfreq: exynos-ppmu: remove unneeded of_node_put()Wei Yongjun
for_each_child_of_node() performs an of_node_put() on each iteration, so putting an of_node_put() before a continue results in a double put. Generated by: scripts/coccinelle/iterators/device_node_continue.cocci Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-07-06PM / devfreq: exynos-bus: add missing of_node_put after calling of_parse_phandlePeter Chen
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. [Commit updated to fix an error by MyungJoo] Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-07-06PM / devfreq: add missing of_node_put after calling of_parse_phandlePeter Chen
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-07-06PM / devfreq: exynos-ppmu: fix error path in exynos_ppmu_probe()Bartlomiej Zolnierkiewicz
iounmap() needs to be called in case of memory allocation (for devfreq-event devices) failure. Fix it. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-07-06PM / devfreq: exynos: fix error path in exynos_bus_probe()Bartlomiej Zolnierkiewicz
In case of exynos_bus_parse_of() failure the code shouldn't try to remove the OPP table and disable+unprepare bus->clk as it has been already handled in exynos_bus_parse_of(). Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-07-06PM / devfreq: make event/exynos-ppmu DEVFREQ_EVENT_EXYNOS_PPMU tristatePaul Gortmaker
The Kconfig currently controlling compilation of this code is: config DEVFREQ_EVENT_EXYNOS_PPMU bool "EXYNOS PPMU (Platform Performance Monitoring Unit) DEVFREQ event Driver" ...meaning that it currently is not being built as a module by anyone. Rather than rip out the existing modular code, Chanwoo indicated that he'd rather see the driver offered as tristate. I don't have the hardware for runtime validation, so this change is only validated for compile and modpost. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-07-06PM / devfreq: make event/exynos-nocp DEVFREQ_EVENT_EXYNOS_NOCP tristatePaul Gortmaker
The Kconfig currently controlling compilation of this code is: event/Kconfig:config DEVFREQ_EVENT_EXYNOS_NOCP event/Kconfig: bool "EXYNOS NoC (Network On Chip) Probe DEVFREQ event Driver" ...meaning that it currently is not being built as a module by anyone. Rather than rip out the existing modular code, Chanwoo indicated that he'd rather see the driver offered as tristate. I don't have the hardware for runtime validation, so this change is only validated for compile and modpost. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-07-06PM / devfreq: make exynos-bus ARM_EXYNOS_BUS_DEVFREQ tristatePaul Gortmaker
The Kconfig currently controlling compilation of this code is: devfreq/Kconfig:config ARM_EXYNOS_BUS_DEVFREQ devfreq/Kconfig: bool "ARM EXYNOS Generic Memory Bus DEVFREQ Driver" ...meaning that it currently is not being built as a module by anyone. Rather than rip out the existing modular code, Chanwoo indicated that he'd rather see the driver offered as tristate. I don't have the hardware for runtime validation, so this change is only validated for compile and modpost. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-07-06PM / devfreq: make devfreq-event explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: menuconfig PM_DEVFREQ_EVENT bool "DEVFREQ-Event device Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. This code wasn't using module_init, so we don't need to be concerned with altering the initcall level here. We don't replace module.h with init.h since the file already has that. But we do add export.h since this file does export some symbols. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-07-06PM / devfreq: make devfreq explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: menuconfig PM_DEVFREQ bool "Generic Dynamic Voltage and Frequency Scaling (DVFS) support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. This code wasn't using module_init, so we don't need to be concerned with altering the initcall level here. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. We don't replace module.h with init.h since the file already has that. But we do add export.h since this file does export some symbols. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-23PM / devfreq: Send the DEVFREQ_POSTCHANGE notification when target() is failedChanwoo Choi
This patch sends the DEVFREQ_POSTCHANGE notification when devfreq->profile->targer() is failed. The PRECHANGE/POSTCHANGE should be paired. Fixes: 0fe3a66410a3 (PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier) Reported-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-22PM / devfreq: fix initialization of current frequency in last statusLukasz Luba
Some systems need current frequency from last_status for calculation but it is zeroed during initialization. When the device starts there is no history, but we can assume that the last frequency was the same as the initial frequency (which is also used in 'previous_freq'). The log shows the result of this misinterpreted value. [ 2.042847] ... Failed to get voltage for frequency 0: -34 Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() checkDan Carpenter
Smatch complains because platform_get_resource() returns NULL on error and not an error pointer so the check is wrong. Julia Lawall pointed out that normally we don't check these, because devm_ioremap_resource() has a check for NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: remove double put_deviceMyungJoo Ham
When device_register() returns with error, it has already done put_device() on the input device pointer. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: fix double call put_deviceCai Zhiyong
1295 */ 1296 void device_unregister(struct device *dev) 1297 { 1298 pr_debug("device: '%s': %s\n", dev_name(dev), __func__); 1299 device_del(dev); 1300 put_device(dev); 1301 } 1302 EXPORT_SYMBOL_GPL(device_unregister); 1303 device_unregister is called put_device, there is no need to call put_device(&devfreq->dev) again. Signed-off-by: Cai Zhiyong <caizhiyong@huawei.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: fix duplicated kfree on devfreq pointerMyungJoo Ham
device_unregister() calls kfree already. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: devm_kzalloc to have dev pointer more preciselyMyungJoo Ham
devm_kzalloc of devfreq's statistics data structure has been using its parent device as the dev allocated for. If a device's devfreq is disabled in run-time, such allocated memory won't be freed. Desginating more precisely with the devfreq device pointer fixes the issue. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-05-03PM / devfreq: style/typo fixesMyungJoo Ham
- Typo in comments fixed - Unnecessary return statement removed Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-05-03PM / devfreq: event: Find the instance of devfreq-event device by using phandleChanwoo Choi
This patch use the phandle to find the instance of devfreq-event device in Device Tree when calling the devfreq_event_get_edev_by_phandle() because there is two type devfreq-event devices as following: First case, exynos-ppmu.c driver provides the maximum four event of each PPMU. So, when getting the instance of devfreq-event device, using the unique name of struct devfreq_event_desc. Second case, exynos-nocp.c driver provide the only one event of each NoC Probe device. So, when getting the instance of devfreq-event device, using the phandle of each NoC probe device. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-05-03PM / devfreq: event: Add new Exynos NoC probe driverChanwoo Choi
This patch adds NoC (Network on Chip) Probe driver which provides the primitive values to get the performance data. The packets that the Network on Chip (NoC) probes detects are transported over the network infrastructure. Exynos542x bus has multiple NoC probes to provide bandwidth information about behavior of the SoC that you can use while analyzing system performance. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03PM / devfreq: exynos: Remove unused exynos4/5 busfreq driverChanwoo Choi
This patch removes the unused exynos4/5 busfreq driver. Instead, generic exynos-bus frequency driver support the all Exynos SoCs. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03PM / devfreq: exynos: Add support of bus frequency of sub-blocks using ↵Chanwoo Choi
passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03PM / devfreq: Add new passive governorChanwoo Choi
This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifierChanwoo Choi
This patch adds the new DEVFREQ_TRANSITION_NOTIFIER notifier to send the notification when the frequency of device is changed. This notifier has two state as following: - DEVFREQ_PRECHANGE : Notify it before chaning the frequency of device - DEVFREQ_POSTCHANGE : Notify it after changed the frequency of device And this patch adds the resourced-managed function to release the resource automatically when error happen. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board] Tested-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03PM / devfreq: Add devfreq_get_devfreq_by_phandle()Chanwoo Choi
This patch adds the new devfreq_get_devfreq_by_phandle() OF helper function which can find the instance of devfreq device by using phandle ("devfreq"). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> [m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board] Tested-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03PM / devfreq: exynos: Add generic exynos bus frequency driverChanwoo Choi
This patch adds the generic exynos bus frequency driver for AMBA AXI bus of sub-blocks in exynos SoC with DEVFREQ framework. The Samsung Exynos SoC have the common architecture for bus between DRAM and sub-blocks in SoC. This driver can support the generic bus frequency driver for Exynos SoCs. In devicetree, Each bus block has a bus clock, regulator, operation-point and devfreq-event devices which measure the utilization of each bus block. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board] Tested-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-17PM / devfreq: Spelling s/frequnecy/frequency/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-23PM / devfreq: tegra: Set freq in rate callbackTomeu Vizoso
As per the documentation of the devfreq_dev_profile.target callback, set the freq argument to the new frequency before returning. This caused endless messages like this after recent changes in the core: devfreq 6000c800.actmon: Couldn't update frequency transition information. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reported-by: Tyler Baker <tyler.baker@linaro.org> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: Do not show statistics if it's not ready.MyungJoo Ham
Before this patch for a device without statistics support, $ cat trans_stat From : To : time(ms) Total transitions : 0 $ After this patch applied for such a device, $ cat trans_stat Not Supported. $ Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: Modify the indentation of trans_stat sysfs for readabilityChanwoo Choi
This patch modifies the indentation of 'trans_stat' sysfs to improve readability. The 1GHz is 1000,000,000. So it needs the least 10 position to show the GHz unit. - Before apply this patch, -sh-3.2# cat trans_stat From : To :50000000100000000133000000200000000400000000 time(ms) *50000000: 0 0 0 0 7 1817635 100000000: 4 0 0 0 4 1590 133000000: 1 4 0 0 7 975 200000000: 2 2 7 0 1 2655 400000000: 0 2 5 12 0 1860 Total transition : 58 - After apply this patch, -sh-3.2# cat trans_stat From : To : 50000000 100000000 133000000 200000000 400000000 time(ms) * 50000000: 0 0 0 0 7 14405 100000000: 4 0 0 0 3 2015 133000000: 2 3 0 0 7 1020 200000000: 1 2 7 0 0 2970 400000000: 0 2 5 10 0 1575 Total transition : 53 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: Set the freq_table of devfreq deviceChanwoo Choi
This patch initialize the freq_table array of each devfreq device by using the devfreq_set_freq_table(). If freq_table is NULL, the devfreq framework is not able to support the frequency transtion information through sysfs. The OPP core uses the integer type for the number of opps in the opp list and uses the 'unsigned long' type for each frequency. So, this patch modifies the type of some variable as following: - the type of freq_table : unsigned int -> unsigned long - the type of max_state : unsigned int -> int - Corrected types, format strings, mutex usages by MyungJoo Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: Add show_one macro to delete the duplicate codeChanwoo Choi
This patch adds the 'show_one' macro to simplify the duplicate code of both max_freq_show() and min_freq_show(). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: event: Fix the error and warning from script/checkpatch.plChanwoo Choi
This patch just fixes following error and warning by using scripts/checkpatch.pl. - Follwoing issue from checkpatch.pl: ERROR: space prohibited before that close parenthesis ')' + if (count < 0 ) { WARNING: line over 80 characters + ptr = devres_alloc(devm_devfreq_event_release, sizeof(*ptr), GFP_KERNEL); Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: event: Remove the error log of devfreq_event_get_edev_by_phandle()Chanwoo Choi
This patch just removes the error log when devfreq_event_get_edev_by_phandle() fail to get the instance of devfreq-event device. It is related to sequence of the probe() of each driver. So, this error log might show the always during kernel booting. Each driver using this function can show the appropriate error log. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-10-02PM / devfreq: fix double kfreeGeliang Tang
When device_register() fails, kfree(devfreq) is called already in devfreq_dev_release(), hence there is no need to call kfree(devfreq) in err_dev again. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-30PM / devfreq: Fix governor_store()Tobias Jakobi
Writing the currently set governor into sysfs currently seems to fail. Fix this by setting the return code to zero before leaving governor_store(). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11PM / devfreq: Fix incorrect type issue.Xiaolong Ye
time_in_state in struct devfreq is defined as unsigned long, so devm_kzalloc should use sizeof(unsigned long) as argument instead of sizeof(unsigned int), otherwise it will cause unexpected result in 64bit system. Signed-off-by: Xiaolong Ye <yexl@marvell.com> Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11PM / devfreq: tegra: Update governor to use devfreq_update_stats()MyungJoo Ham
Direct invocation of get_dev_status() is no more recommended. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11PM / devfreq: drop comment about thermal setting max_freqJavi Merino
The thermal infrastructure should use the devfreq cooling device, which uses the OPP library to disable OPPs as necessary. Fix a couple of typos in the same comment while we are at it. Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11PM / devfreq: cache the last call to get_dev_status()Javi Merino
The return value of get_dev_status() can be reused. Cache it so that other parts of the kernel can reuse it instead of having to call the same function again. Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11PM / devfreq: Drop unlikely before IS_ERR(_OR_NULL)Viresh Kumar
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there is no need to do that again from its callers. Drop it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>