summaryrefslogtreecommitdiff
path: root/drivers/dma/Kconfig
AgeCommit message (Collapse)Author
2021-10-01dmaengine: zynqmp_dma: enable COMPILE_TESTMichael Tretter
The driver doesn't use anything architecture specific. Allow the compilation on other architectures as well. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Link: https://lore.kernel.org/r/20210826094742.1302009-4-m.tretter@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-29dmaengine: ptdma: Initial driver for the AMD PTDMASanjay R Mehta
Add support for AMD PTDMA controller. It performs high-bandwidth memory to memory and IO copy operation. Device commands are managed via a circular queue of 'descriptors', each of which specifies source and destination addresses for copying a single buffer of data. Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Link: https://lore.kernel.org/r/1629208559-51964-2-git-send-email-Sanju.Mehta@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-29dmaengine: idxd: fix setting up priv mode for dwqDave Jiang
DSA spec says WQ priv bit is 0 if the Privileged Mode Enable field of the PCI Express PASID capability is 0 and pasid is enabled. Make sure that the WQCFG priv field is set correctly according to usage type. Reject config if setting up kernel WQ type and no support. Also add the correct priv setup for a descriptor. Fixes: 484f910e93b4 ("dmaengine: idxd: fix wq config registers offset programming") Cc: Ramesh Thomas <ramesh.thomas@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162939084657.903168.14160019185148244596.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-25dmaengine: ioat: depends on !UMLJohannes Berg
Now that UML has PCI support, this driver must depend also on !UML since it pokes at X86_64 architecture internals that don't exist on ARCH=um. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20210809112409.a3a0974874d2.I2ffe3d11ed37f735da2f39884a74c953b258b995@changeid Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-21dmaengine: idxd: move dsa_drv support to compatible modeDave Jiang
The original architecture of /sys/bus/dsa invented a scheme whereby a single entry in the list of bus drivers, /sys/bus/drivers/dsa, handled all device types and internally routed them to different different drivers. Those internal drivers were invisible to userspace. With the idxd driver transitioned to a proper bus device-driver model, the legacy behavior needs to be preserved due to it being exposed to user space via sysfs. Create a compat driver to provide the legacy behavior for /sys/bus/dsa/drivers/dsa. This should satisfy user tool accel-config v3.2 or ealier where this behavior is expected. If the distro has a newer accel-config then the legacy mode does not need to be enabled. When the compat driver binds the device (i.e. dsa0) to the dsa driver, it will be bound to the new idxd_drv. The wq device (i.e. wq0.0) will be bound to either the dmaengine_drv or the user_drv. The dsa_drv becomes a routing mechansim for the new drivers. It will not support additional external drivers that are implemented later. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162637468705.744545.4399080971745974435.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-21dmaengine: dsa: move dsa_bus_type out of idxd driver to standaloneDave Jiang
In preparation for dsa_drv compat support to be built-in, move the bus code to its own compilation unit. A follow-on patch adds the compat implementation. Recall that the compat implementation allows for the deprecated / omnibus dsa_drv binding scheme rather than the idiomatic organization of a full fledged bus driver per driver type. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162637468142.744545.2811632736881720857.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-14dmaengine: idxd: depends on !UMLJohannes Berg
Now that UML has PCI support, this driver must depend also on !UML since it pokes at X86_64 architecture internals that don't exist on ARCH=um. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Link: https://lore.kernel.org/r/20210625103810.fe877ae0aef4.If240438e3f50ae226f3f755fc46ea498c6858393@changeid Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31dmaengine: ALTERA_MSGDMA depends on HAS_IOMEMRandy Dunlap
When CONFIG_HAS_IOMEM is not set/enabled, certain iomap() family functions [including ioremap(), devm_ioremap(), etc.] are not available. Drivers that use these functions should depend on HAS_IOMEM so that they do not cause build errors. Repairs this build error: s390-linux-ld: drivers/dma/altera-msgdma.o: in function `request_and_map': altera-msgdma.c:(.text+0x14b0): undefined reference to `devm_ioremap' Fixes: a85c6f1b2921 ("dmaengine: Add driver for Altera / Intel mSGDMA IP core") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Stefan Roese <sr@denx.de> Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Reviewed-by: Stefan Roese <sr@denx.de> Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de Link: https://lore.kernel.org/r/20210522021313.16405-2-rdunlap@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31dmaengine: xilinx: dpdma: Add missing dependencies to KconfigLaurent Pinchart
The driver depends on both OF and IOMEM support, express those dependencies in Kconfig. This fixes a build failure on S390 reported by the 0day bot. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jianqiang Chen <jianqiang.chen@xilinx.com> Reviewed-by: Jianqiang Chen <jianqiang.chen@xilinx.com> Link: https://lore.kernel.org/r/20210520152420.23986-2-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-04Merge tag 'dmaengine-5.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New drivers/devices: - Support for QCOM SM8150 GPI DMA Updates: - Big pile of idxd updates including support for performance monitoring - Support in dw-edma for interleaved dma - Support for synchronize() in Xilinx driver" * tag 'dmaengine-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (42 commits) dmaengine: idxd: Enable IDXD performance monitor support dmaengine: idxd: Add IDXD performance monitor support dmaengine: idxd: remove MSIX masking for interrupt handlers dmaengine: idxd: device cmd should use dedicated lock dmaengine: idxd: support reporting of halt interrupt dmaengine: idxd: enable SVA feature for IOMMU dmaengine: idxd: convert sprintf() to sysfs_emit() for all usages dmaengine: idxd: add interrupt handle request and release support dmaengine: idxd: add support for readonly config mode dmaengine: idxd: add percpu_ref to descriptor submission path dmaengine: idxd: remove detection of device type dmaengine: idxd: iax bus removal dmaengine: idxd: fix cdev setup and free device lifetime issues dmaengine: idxd: fix group conf_dev lifetime dmaengine: idxd: fix engine conf_dev lifetime dmaengine: idxd: fix wq conf_dev 'struct device' lifetime dmaengine: idxd: fix idxd conf_dev 'struct device' lifetime dmaengine: idxd: use ida for device instance enumeration dmaengine: idxd: removal of pcim managed mmio mapping dmaengine: idxd: cleanup pci interrupt vector allocation management ...
2021-04-25dmaengine: idxd: Add IDXD performance monitor supportTom Zanussi
Implement the IDXD performance monitor capability (named 'perfmon' in the DSA (Data Streaming Accelerator) spec [1]), which supports the collection of information about key events occurring during DSA and IAX (Intel Analytics Accelerator) device execution, to assist in performance tuning and debugging. The idxd perfmon support is implemented as part of the IDXD driver and interfaces with the Linux perf framework. It has several features in common with the existing uncore pmu support: - it does not support sampling - does not support per-thread counting However it also has some unique features not present in the core and uncore support: - all general-purpose counters are identical, thus no event constraints - operation is always system-wide While the core perf subsystem assumes that all counters are by default per-cpu, the uncore pmus are socket-scoped and use a cpu mask to restrict counting to one cpu from each socket. IDXD counters use a similar strategy but expand the scope even further; since IDXD counters are system-wide and can be read from any cpu, the IDXD perf driver picks a single cpu to do the work (with cpu hotplug notifiers to choose a different cpu if the chosen one is taken off-line). More specifically, the perf userspace tool by default opens a counter for each cpu for an event. However, if it finds a cpumask file associated with the pmu under sysfs, as is the case with the uncore pmus, it will open counters only on the cpus specified by the cpumask. Since perfmon only needs to open a single counter per event for a given IDXD device, the perfmon driver will create a sysfs cpumask file for the device and insert the first cpu of the system into it. When a user uses perf to open an event, perf will open a single counter on the cpu specified by the cpu mask. This amounts to the default system-wide rather than per-cpu counting mentioned previously for perfmon pmu events. In order to keep the cpu mask up-to-date, the driver implements cpu hotplug support for multiple devices, as IDXD usually enumerates and registers more than one idxd device. The perfmon driver implements basic perfmon hardware capability discovery and configuration, and is initialized by the IDXD driver's probe function. During initialization, the driver retrieves the total number of supported performance counters, the pmu ID, and the device type from idxd device, and registers itself under the Linux perf framework. The perf userspace tool can be used to monitor single or multiple events depending on the given configuration, as well as event groups, which are also supported by the perfmon driver. The user configures events using the perf tool command-line interface by specifying the event and corresponding event category, along with an optional set of filters that can be used to restrict counting to specific work queues, traffic classes, page and transfer sizes, and engines (See [1] for specifics). With the configuration specified by the user, the perf tool issues a system call passing that information to the kernel, which uses it to initialize the specified event(s). The event(s) are opened and started, and following termination of the perf command, they're stopped. At that point, the perfmon driver will read the latest count for the event(s), calculate the difference between the latest counter values and previously tracked counter values, and display the final incremental count as the event count for the cycle. An overflow handler registered on the IDXD irq path is used to account for counter overflows, which are signaled by an overflow interrupt. Below are a couple of examples of perf usage for monitoring DSA events. The following monitors all events in the 'engine' category. Becuuse no filters are specified, this captures all engine events for the workload, which in this case is 19 iterations of the work generated by the kernel dmatest module. Details describing the events can be found in Appendix D of [1], Performance Monitoring Events, but briefly they are: event 0x1: total input data processed, in 32-byte units event 0x2: total data written, in 32-byte units event 0x4: number of work descriptors that read the source event 0x8: number of work descriptors that write the destination event 0x10: number of work descriptors dispatched from batch descriptors event 0x20: number of work descriptors dispatched from work queues # perf stat -e dsa0/event=0x1,event_category=0x1/, dsa0/event=0x2,event_category=0x1/, dsa0/event=0x4,event_category=0x1/, dsa0/event=0x8,event_category=0x1/, dsa0/event=0x10,event_category=0x1/, dsa0/event=0x20,event_category=0x1/ modprobe dmatest channel=dma0chan0 timeout=2000 iterations=19 run=1 wait=1 Performance counter stats for 'system wide': 5,332 dsa0/event=0x1,event_category=0x1/ 5,327 dsa0/event=0x2,event_category=0x1/ 19 dsa0/event=0x4,event_category=0x1/ 19 dsa0/event=0x8,event_category=0x1/ 0 dsa0/event=0x10,event_category=0x1/ 19 dsa0/event=0x20,event_category=0x1/ 21.977436186 seconds time elapsed The command below illustrates filter usage with a simple example. It specifies that MEM_MOVE operations should be counted for the DSA device dsa0 (event 0x8 corresponds to the EV_MEM_MOVE event - Number of Memory Move Descriptors, which is part of event category 0x3 - Operations. The detailed category and event IDs are available in Appendix D, Performance Monitoring Events, of [1]). In addition to the event and event category, a number of filters are also specified (the detailed filter values are available in Chapter 6.4 (Filter Support) of [1]), which will restrict counting to only those events that meet all of the filter criteria. In this case, the filters specify that only MEM_MOVE operations that are serviced by work queue wq0 and specifically engine number engine0 and traffic class tc0 having sizes between 0 and 4k and page size of between 0 and 1G result in a counter hit; anything else will be filtered out and not appear in the final count. Note that filters are optional - any filter not specified is assumed to be all ones and will pass anything. # perf stat -e dsa0/filter_wq=0x1,filter_tc=0x1,filter_sz=0x7, filter_eng=0x1,event=0x8,event_category=0x3/ modprobe dmatest channel=dma0chan0 timeout=2000 iterations=19 run=1 wait=1 Performance counter stats for 'system wide': 19 dsa0/filter_wq=0x1,filter_tc=0x1,filter_sz=0x7, filter_eng=0x1,event=0x8,event_category=0x3/ 21.865914091 seconds time elapsed The output above reflects that the unspecified workload resulted in the counting of 19 MEM_MOVE operation events that met the filter criteria. [1]: https://software.intel.com/content/www/us/en/develop/download/intel-data-streaming-accelerator-preliminary-architecture-specification.html [ Based on work originally by Jing Lin. ] Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Link: https://lore.kernel.org/r/0c5080a7d541904c4ad42b848c76a1ce056ddac7.1619276133.git.zanussi@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-23dmaengine: socfpga: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCsKrzysztof Kozlowski
ARCH_SOCFPGA is being renamed to ARCH_INTEL_SOCFPGA so adjust the 32-bit ARM drivers to rely on new symbol. Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-02-01dmaengine: drivers: Kconfig: add HAS_IOMEM dependency to DW_AXI_DMACSia Jee Heng
If HAS_IOMEM is not defined and DW_AXI_DMAC is enabled under COMPILE_TEST, the build fails with the following error: dw-axi-dmac-platform.c:(.text+0xc4): undefined reference to `devm_ioremap_resource' Link: https://www.spinics.net/lists/dmaengine/msg25188.html Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com> Link: https://lore.kernel.org/r/20210125013255.25799-13-jee.heng.sia@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-26dmaengine: mmp_tdma: Allow building as a moduleLubomir Rintel
There is no reason the Marvell MMP two-channel audio DMA driver would have to be built-in. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20210121110356.1768635-4-lkundrak@v3.sk Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-26dmaengine: mmp_pdma: Allow building as a moduleLubomir Rintel
There is no reason the Marvell MMP peripheral DMA driver would have to be built-in. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20210121110356.1768635-3-lkundrak@v3.sk Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-26dmaengine: remove coh901318 driverArnd Bergmann
The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210120131859.2056308-4-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-26dmaengine: remove zte zx driverArnd Bergmann
The zte zx platform is getting removed, so this driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Jun Nie <jun.nie@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Link: https://lore.kernel.org/r/20210120131859.2056308-3-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-26dmaengine: remove sirfsoc driverArnd Bergmann
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <baohua@kernel.org> Cc: Barry Song <baohua@kernel.org> Link: https://lore.kernel.org/r/20210120131859.2056308-2-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-12dmaengine: Add Intel LGM SoC DMA support.Amireddy Mallikarjuna reddy
Add DMA controller driver for Lightning Mountain (LGM) family of SoCs. The main function of the DMA controller is the transfer of data from/to any peripheral to/from the memory. A memory to memory copy capability can also be configured. This ldma driver is used for configure the device and channnels for data and control paths. Signed-off-by: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@linux.intel.com> Link: https://lore.kernel.org/r/5fc54eb7ccfad4f8dd812b66b884054fc55cf050.1606905330.git.mallikarjunax.reddy@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-17Merge tag 'dmaengine-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "The last dmaengine updates for this year :) This contains couple of new drivers, new device support and updates to bunch of drivers. New drivers/devices: - Qualcomm ADM driver - Qualcomm GPI driver - Allwinner A100 DMA support - Microchip Sama7g5 support - Mediatek MT8516 apdma Updates: - more updates to idxd driver and support for IAX config - runtime PM support for dw driver - TI drivers" * tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits) soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA dmaengine: ti: k3-udma: Initial support for K3 PKTDMA dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling dmaengine: ti: k3-udma: Initial support for K3 BCDMA soc: ti: k3-ringacc: add AM64 DMA rings support. dmaengine: ti: Add support for k3 event routers dmaengine: ti: k3-psil: Add initial map for AM64 dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA dt-bindings: dma: ti: Add document for K3 PKTDMA dt-bindings: dma: ti: Add document for K3 BCDMA dmaengine: dmatest: Use dmaengine_get_dma_device dmaengine: doc: client: Update for dmaengine_get_dma_device() usage dmaengine: Add support for per channel coherency handling dmaengine: of-dma: Add support for optional router configuration callback dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API dmaengine: ti: k3-udma: Add support for second resource range from sysfw dmaengine: ti: k3-udma: Wait for peer teardown completion if supported ...
2020-10-30dmaengine: idxd: Add shared workqueue supportDave Jiang
Add shared workqueue support that includes the support of Shared Virtual memory (SVM) or in similar terms On Demand Paging (ODP). The shared workqueue uses the enqcmds command in kernel and will respond with retry if the workqueue is full. Shared workqueue only works when there is PASID support from the IOMMU. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/160382007499.3911367.26043087963708134.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-28misc: mic: remove the MIC driversSudeep Dutt
This patch removes the MIC drivers from the kernel tree since the corresponding devices have been discontinued. Removing the dma and char-misc changes in one patch and merging via the char-misc tree is best to avoid any potential build breakage. Cc: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Acked-By: Vinod Koul <vkoul@kernel.org> Reviewed-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-07Merge branch 'topic/xilinx' into fixesVinod Koul
Conflicts: Documentation/driver-api/dmaengine/provider.rst include/linux/dmaengine.h
2020-07-17dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driverHyun Kwon
The ZynqMP DisplayPort subsystem includes a DMA engine called DPDMA with 6 DMa channels (4 for display and 2 for audio). This driver exposes the DPDMA through the dmaengine API, to be used by audio (ALSA) and display (DRM) drivers for the DisplayPort subsystem. Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Tejas Upadhyay <tejasu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200717013337.24122-4-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-15dmaengine: idxd: fix PCI_MSI build errorsRandy Dunlap
Fix build errors when CONFIG_PCI_MSI is not enabled by making the driver depend on PCI_MSI: ld: drivers/dma/idxd/device.o: in function `idxd_mask_msix_vector': device.c:(.text+0x26f): undefined reference to `pci_msi_mask_irq' ld: drivers/dma/idxd/device.o: in function `idxd_unmask_msix_vector': device.c:(.text+0x2af): undefined reference to `pci_msi_unmask_irq' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: dmaengine@vger.kernel.org Cc: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/9dee3f46-70d9-ea75-10cb-5527ab297d1d@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-24dmaengine: idxd: move submission to sbitmap_queueDave Jiang
Kill the percpu-rwsem for work submission in favor of an sbitmap_queue. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/159225446631.68253.8860709181621260997.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-10Merge tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "A fairly small dmaengine update which includes mostly driver updates (dmatest, dw-edma, ioat, mmp-tdma and k3-udma) along with Renesas binding update to json-schema" * tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (39 commits) dmaengine: imx-sdma: initialize all script addresses dmaengine: ti: k3-udma: Use proper return code in alloc_chan_resources dmaengine: ti: k3-udma: Remove udma_chan.in_ring_cnt dmaengine: ti: k3-udma: Add missing dma_sync call for rx flush descriptor dmaengine: at_xdmac: Replace zero-length array with flexible-array dmaengine: at_hdmac: Replace zero-length array with flexible-array dmaengine: qcom: bam_dma: Replace zero-length array with flexible-array dmaengine: ti: k3-udma: Use PTR_ERR_OR_ZERO() to simplify code dmaengine: moxart-dma: Drop pointless static qualifier in moxart_probe() dmaengine: sf-pdma: Simplify the error handling path in 'sf_pdma_probe()' dmaengine: qcom_hidma: use true,false for bool variable dmaengine: dw-edma: support local dma device transfer semantics dmaengine: Fix doc strings to satisfy validation script dmaengine: Include dmaengine.h into dmaengine.c dmaengine: dmatest: Describe members of struct dmatest_info dmaengine: dmatest: Describe members of struct dmatest_params dmaengine: dmatest: Allow negative timeout value to specify infinite wait Revert "dmaengine: dmatest: timeout value of -1 should specify infinite wait" dmaengine: stm32-dma: direct mode support through device tree dt-bindings: dma: add direct mode support through device tree in stm32-dma ...
2020-04-23dmaengine: mmp_tdma: Remove the MMP_SRAM dependencyLubomir Rintel
A generic SRAM will driver for Device Tree enabled platforms will do as well. The non-DT drivers that use mmp_tdma to transfer audio samples to and from the audio SRAM should depend on MMP_SRAM themselves. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200419164912.670973-8-lkundrak@v3.sk Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-17dmaengine: Fix misspelling of "Analog Devices"Geert Uytterhoeven
According to https://www.analog.com/, the company name is spelled "Analog Devices". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20200416103058.15269-3-geert+renesas@glider.be [vkoul: make subsystem name dmaengine] Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-15dmaengine: hisilicon: Fix build error without PCI_MSIYueHaibing
If PCI_MSI is not set, building fais: drivers/dma/hisi_dma.c: In function ‘hisi_dma_free_irq_vectors’: drivers/dma/hisi_dma.c:138:2: error: implicit declaration of function ‘pci_free_irq_vectors’; did you mean ‘pci_alloc_irq_vectors’? [-Werror=implicit-function-declaration] pci_free_irq_vectors(data); ^~~~~~~~~~~~~~~~~~~~ Make HISI_DMA depends on PCI_MSI to fix this. Fixes: e9f08b65250d ("dmaengine: hisilicon: Add Kunpeng DMA engine support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200328114133.17560-1-yuehaibing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-02dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driverKunihiko Hayashi
This adds external DMA controller driver implemented in Socionext UniPhier SoCs. This driver supports DMA_MEMCPY and DMA_SLAVE modes. Since this driver does not support the the way to transfer size unaligned to burst width, 'src_maxburst' or 'dst_maxburst' of dma_slave_config must be 1 to transfer arbitrary size. If transfer size is unaligned to burst size, the transfer isn't started and the driver displays an error message. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1582271550-3403-3-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25dmaengine: tegra-apb: Support COMPILE_TESTDmitry Osipenko
There is nothing arch-specific in the driver's code, so let's enable compile-testing for the driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20200209163356.6439-18-digetx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25dmaengine: tegra-apb: Allow to compile as a loadable kernel moduleDmitry Osipenko
The driver's removal was fixed by a recent commit and module load/unload is working well now, tested on Tegra30. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20200209163356.6439-16-digetx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24dmaengine: hisilicon: Add Kunpeng DMA engine supportZhou Wang
This patch adds a driver for HiSilicon Kunpeng DMA engine. This DMA engine which is an PCIe iEP offers 30 channels, each channel has a send queue, a complete queue and an interrupt to help to do tasks. This DMA engine can do memory copy between memory blocks or between memory and device buffer. Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Zhenfa Qiu <qiuzhenfa@hisilicon.com> Link: https://lore.kernel.org/r/1579155057-80523-1-git-send-email-wangzhou1@hisilicon.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24dmaengine: idxd: Init and probe for Intel data acceleratorsDave Jiang
The idxd driver introduces the Intel Data Stream Accelerator [1] that will be available on future Intel Xeon CPUs. One of the kernel access point for the driver is through the dmaengine subsystem. It will initially provide the DMA copy service to the kernel. Some of the main functionality introduced with this accelerator are: shared virtual memory (SVM) support, and descriptor submission using Intel CPU instructions movdir64b and enqcmds. There will be additional accelerator devices that share the same driver with variations to capabilities. This commit introduces the probe and initialization component of the driver. [1]: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specification Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/157965023991.73301.6186843973135311580.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-15dmaengine: plx-dma: Introduce PLX DMA engine PCI driver skeletonLogan Gunthorpe
Some PLX Switches can expose DMA engines via extra PCI functions on the upstream port. Each function will have one DMA channel. This patch is just the core PCI driver skeleton and dma engine registration. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20200103212021.2881-2-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-22dmaengine: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/1574306348-29212-1-git-send-email-krzk@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-14dmaengine: sf-pdma: add platform DMA support for HiFive Unleashed A00Green Wan
Add PDMA driver, sf-pdma, to enable DMA engine on HiFive Unleashed Rev A00 board. - Implement dmaengine APIs, support MEM_TO_MEM async copy. - Tested by DMA Test client - Supports 4 channels DMA, each channel has 1 done and 1 err interrupt connected to platform-level interrupt controller (PLIC). - Depends on DMA_ENGINE and DMA_VIRTUAL_CHANNELS The datasheet is here: https://static.dev.sifive.com/FU540-C000-v1.0.pdf Follow the DMAengine controller doc, "./Documentation/driver-api/dmaengine/provider.rst" to implement DMA engine. And use the dma test client in doc, "./Documentation/driver-api/dmaengine/dmatest.rst", to test. Each DMA channel has separate HW regs and support done and error ISRs. 4 channels share 1 done and 1 err ISRs. There's no expander/arbitrator in DMA HW. ------ ------ | |--< done 23 >--|ch 0| | |--< err 24 >--| | (dma0chan0) | | ------ | | ------ | |--< done 25 >--|ch 1| | |--< err 26 >--| | (dma0chan1) |PLIC| ------ | | ------ | |--< done 27 >--|ch 2| | |--< err 28 >--| | (dma0chan2) | | ------ | | ------ | |--< done 29 >--|ch 3| | |--< err 30 >--| | (dma0chan3) ------ ------ Signed-off-by: Green Wan <green.wan@sifive.com> Link: https://lore.kernel.org/r/20191107084955.7580-4-green.wan@sifive.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-06dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver supportRadhey Shyam Pandey
Add support for AXI Multichannel Direct Memory Access (AXI MCDMA) core, which is a soft Xilinx IP core that provides high-bandwidth direct memory access between memory and AXI4-Stream target peripherals. The AXI MCDMA core provides scatter-gather interface with multiple independent transmit and receive channels. The driver supports device_prep_slave_sg slave transfer mode. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571763622-29281-7-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-18dmaengine: milbeaut-xdmac: Add XDMAC driver for Milbeaut platformsJassi Brar
Driver for Socionext Milbeaut XDMAC controller. The controller only supports Mem-To-Mem transfers over upto 8 configurable channels. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Link: https://lore.kernel.org/r/20191015033219.14713-1-jassisinghbrar@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-18dmaengine: milbeaut-hdmac: Add HDMAC driver for Milbeaut platformsJassi Brar
Driver for Socionext Milbeaut HDMAC controller. The controller has upto 8 floating channels, that need a predefined slave-id to work from a set of slaves. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Link: https://lore.kernel.org/r/20191015033359.14925-1-jassisinghbrar@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-17dmaengine: fsl-dpaa2-qdma: Add NXP dpaa2 qDMA controller driver for ↵Peng Ma
Layerscape SoCs DPPA2(Data Path Acceleration Architecture 2) qDMA supports virtualized channel by allowing DMA jobs to be enqueued into different work queues. Core can initiate a DMA transaction by preparing a frame descriptor(FD) for each DMA job and enqueuing this job through a hardware portal. DPAA2 components can also prepare a FD and enqueue a DMA job through a hardware portal. The qDMA prefetches DMA jobs through DPAA2 hardware portal. It then schedules and dispatches to internal DMA hardware engines, which generate read and write requests. Both qDMA source data and destination data can be either contiguous or non-contiguous using one or more scatter/gather tables. The qDMA supports global bandwidth flow control where all DMA transactions are stalled if the bandwidth threshold has been reached. Also supported are transaction based read throttling. Add NXP dppa2 qDMA to support some of Layerscape SoCs. such as: LS1088A, LS208xA, LX2, etc. Signed-off-by: Peng Ma <peng.ma@nxp.com> Link: https://lore.kernel.org/r/20190930020440.7754-2-peng.ma@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-09-22Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds
Pull MIPS updates from Paul Burton: "Main MIPS changes: - boot_mem_map is removed, providing a nice cleanup made possible by the recent removal of bootmem. - Some fixes to atomics, in general providing compiler barriers for smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or MIPS32 systems using cmpxchg64(). - Conversion to the new generic VDSO infrastructure courtesy of Vincenzo Frascino. - Removal of undefined behavior in set_io_port_base(), fixing the behavior of some MIPS kernel configurations when built with recent clang versions. - Initial MIPS32 huge page support, functional on at least Ingenic SoCs. - pte_special() is now supported for some configurations, allowing among other things generic fast GUP to be used. - Miscellaneous fixes & cleanups. And platform specific changes: - Major improvements to Ingenic SoC support from Paul Cercueil, mostly enabled by the inclusion of the new TCU (timer-counter unit) drivers he's spent a very patient year or so working on. Plus some fixes for X1000 SoCs from Zhou Yanjie. - Netgear R6200 v1 systems are now supported by the bcm47xx platform. - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems" * tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits) MIPS: Detect bad _PFN_SHIFT values MIPS: Disable pte_special() for MIPS32 with RiXi MIPS: ralink: deactivate PCI support for SOC_MT7621 mips: compat: vdso: Use legacy syscalls as fallback MIPS: Drop Loongson _CACHE_* definitions MIPS: tlbex: Remove cpu_has_local_ebase MIPS: tlbex: Simplify r3k check MIPS: Select R3k-style TLB in Kconfig MIPS: PCI: refactor ioc3 special handling mips: remove ioremap_cachable mips/atomic: Fix smp_mb__{before,after}_atomic() mips/atomic: Fix loongson_llsc_mb() wreckage mips/atomic: Fix cmpxchg64 barriers MIPS: Octeon: remove duplicated include from dma-octeon.c firmware: bcm47xx_nvram: Allow COMPILE_TEST firmware: bcm47xx_nvram: Correct size_t printf format MIPS: Treat Loongson Extensions as ASEs MIPS: Remove dev_err() usage after platform_get_irq() MIPS: dts: mscc: describe the PTP ready interrupt MIPS: dts: mscc: describe the PTP register range ...
2019-09-17Merge tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: - Move Dmaengine DT bindings to YAML and convert Allwinner to schema. - FSL dma device_synchronize implementation - DW split acpi and of helpers and updates to driver and support for Elkhart Lake - Move filter fn as private for omap-dma and edma drivers and improvements to these drivers - Mark expected switch fall-through in couple of drivers - Renames of shdma and nbpfaxi binding document - Minor updates to bunch of drivers * tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (55 commits) dmaengine: ti: edma: Use bitmap_set() instead of open coded edma_set_bits() dmaengine: ti: edma: Only reset region0 access registers dmaengine: ti: edma: Do not reset reserved paRAM slots dmaengine: iop-adma.c: fix printk format warning dmaengine: stm32-dma: Use struct_size() helper dt-bindings: dmaengine: dma-common: Fix the dma-channel-mask property dmanegine: ioat/dca: Use struct_size() helper dmaengine: iop-adma: remove set but not used variable 'slots_per_op' dmaengine: dmatest: Add support for completion polling dmaengine: ti: omap-dma: Remove variable override in omap_dma_tx_status() dmaengine: ti: omap-dma: Remove 'Assignment in if condition' dmaengine: ti: edma: Remove 'Assignment in if condition' dmaengine: dw: platform: Split OF helpers to separate module dmaengine: dw: platform: Split ACPI helpers to separate module dmaengine: dw: platform: Move handle check to dw_dma_acpi_controller_register() dmaengine: dw: platform: Switch to acpi_dma_controller_register() dmaengine: dw: platform: Use devm_platform_ioremap_resource() dmaengine: dw: platform: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw: platform: Use struct dw_dma_chip_pdata dmaengine: dw: Export struct dw_dma_chip_pdata for wider use ...
2019-09-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Arnd Bergmann: "The main change this time around is a cleanup of some of the oldest platforms based on the XScale and ARM9 CPU cores, which are between 10 and 20 years old. The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel IOP33x/IOP13xx platforms are removed after we determined that nobody is using them any more. The TI Davinci and NXP LPC32xx platforms on the other hand are still in active use and are converted to the ARCH_MULTIPLATFORM build, meaning that we can compile a kernel that works on these along with most other ARMv5 platforms. Changes toward that goal are also merged for IOP32x, but additional work is needed to complete this. Patches for the remaining ARMv5 platforms have started but need more work and some testing. Support for the new ASpeed AST2600 gets added, this is based on the Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and ARMv6 chips in the same family. Other changes include a cleanup of the ST-Ericsson ux500 platform and the move of the TI Davinci platform to a new clocksource driver" [ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being buildable on other platforms through COMPILE_TEST, but that causes new warnings that I most definitely do not want to see during the merge window as that could hide other issues. So the COMPILE_TEST option got disabled for them again - Linus ] * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build ARM: davinci: support multiplatform build for ARM v5 arm64: exynos: Enable exynos-chipid driver ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init() ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2 ARM: davinci: dm646x: Fix a typo in the comment ARM: davinci: dm646x: switch to using the clocksource driver ARM: davinci: dm644x: switch to using the clocksource driver ARM: aspeed: Enable SMP boot ARM: aspeed: Add ASPEED AST2600 architecture ARM: aspeed: Select timer in each SoC dt-bindings: arm: cpus: Add ASPEED SMP ARM: imx: stop adjusting ar8031 phy tx delay mailmap: map old company name to new one @microchip.com MAINTAINERS: at91: remove the TC entry MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91 MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c ARM: debug-ll: Add support for r7s9210 ...
2019-08-14dma: iop-adma: allow building without platform headersArnd Bergmann
Now that iop3xx and iop13xx are gone, the iop-adma driver no longer needs to deal with incompatible register layout defined in machine specific header files. Move the iop32x specific definitions into drivers/dma/iop-adma.h and the platform_data into include/linux/platform_data/dma-iop32x.h, and change the machine code to no longer reference those. The DMA0_ID/DMA1_ID/AAU_ID macros are required as part of the platform data interface and still need to be visible, so move those from one header to the other. Link: https://lore.kernel.org/r/20190809163334.489360-4-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-14ARM: remove Intel iop33x and iop13xx supportArnd Bergmann
There are three families of IOP machines we support in Linux: iop32x (which includes EP80219), iop33x and iop13xx (aka IOP34x aka WP8134x). All products we support in the kernel are based on the first of these, iop32x, the other families only ever supported the Intel reference boards but no actual machine anyone could ever buy. While one could clearly make them all three work in a single kernel with some work, this takes the easy way out, removing the later two platforms entirely, under the assumption that there are no remaining users. Earlier versions of OpenWRT and Debian both had support for iop32x but not the others, and they both dropped iop32x as well in their 2015 releases. Link: https://lore.kernel.org/r/20190809163334.489360-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C parts Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-07-30dma: Drop JZ4740 driverPaul Cercueil
The newer and better JZ4780 driver is now used to provide DMA functionality on the JZ4740. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Artur Rojek <contact@artur-rojek.eu> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Paul Burton <paul.burton@mips.com>
2019-07-17Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: - Add support in dmaengine core to do device node checks for DT devices and update bunch of drivers to use that and remove open coding from drivers - New driver/driver support for new hardware, namely: - MediaTek UART APDMA - Freescale i.mx7ulp edma2 - Synopsys eDMA IP core version 0 - Allwinner H6 DMA - Updates to axi-dma and support for interleaved cyclic transfers - Greg's debugfs return value check removals on drivers - Updates to stm32-dma, hsu, dw, pl330, tegra drivers * tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support" dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback Documentation: dmaengine: clean up description of dmatest usage dmaengine: tegra210-adma: remove PM_CLK dependency dmaengine: fsl-edma: add i.mx7ulp edma2 version support dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma-common: version check for v2 instead dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver" dmaengine: rcar-dmac: Reject zero-length slave DMA requests dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw-edma: fix semicolon.cocci warnings dmaengine: sh: usb-dmac: Use [] to denote a flexible array member dmaengine: dmatest: timeout value of -1 should specify infinite wait dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit dmaengine: fsl-edma: support little endian for edma driver dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width" dmagengine: pl330: add code to get reset property dt-bindings: pl330: document the optional resets property ...
generated by cgit (git 2.34.1) at 2024-05-26 18:32:31 +0000