summaryrefslogtreecommitdiff
path: root/drivers/dma/dmatest.c
AgeCommit message (Collapse)Author
2019-09-04dmaengine: dmatest: Add support for completion pollingPeter Ujfalusi
With the polled parameter the DMA drivers can be tested if they can work correctly when no completion is requested (no DMA_PREP_INTERRUPT and no callback is provided). If polled mode is selected then use dma_sync_wait() to execute the test iteration instead of relying on the completion callback. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190731071438.24075-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-17Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: - Add support in dmaengine core to do device node checks for DT devices and update bunch of drivers to use that and remove open coding from drivers - New driver/driver support for new hardware, namely: - MediaTek UART APDMA - Freescale i.mx7ulp edma2 - Synopsys eDMA IP core version 0 - Allwinner H6 DMA - Updates to axi-dma and support for interleaved cyclic transfers - Greg's debugfs return value check removals on drivers - Updates to stm32-dma, hsu, dw, pl330, tegra drivers * tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support" dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback Documentation: dmaengine: clean up description of dmatest usage dmaengine: tegra210-adma: remove PM_CLK dependency dmaengine: fsl-edma: add i.mx7ulp edma2 version support dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma-common: version check for v2 instead dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver" dmaengine: rcar-dmac: Reject zero-length slave DMA requests dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw-edma: fix semicolon.cocci warnings dmaengine: sh: usb-dmac: Use [] to denote a flexible array member dmaengine: dmatest: timeout value of -1 should specify infinite wait dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit dmaengine: fsl-edma: support little endian for edma driver dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width" dmagengine: pl330: add code to get reset property dt-bindings: pl330: document the optional resets property ...
2019-06-25dmaengine: dmatest: timeout value of -1 should specify infinite waitHook, Gary
The dmatest module parameter 'timeout' is documented as accepting a -1 to mean "infinite timeout". However, an infinite timeout is not advised, nor possible since the module parameter is an unsigned int, which won't accept a negative value. Change the parameter comment to reflect current behavior, which allows values from 0 up to 4294967295 (0xFFFFFFFF). Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-14Merge tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: - dmatest updates for modularizing common struct and code - remove SG support for VDMA xilinx IP and updates to driver - Update to dw driver to support Intel iDMA controllers multi-block support - tegra updates for proper reporting of residue - Add Snow Ridge ioatdma device id and support for IOATDMA v3.4 - struct_size() usage and useless LIST_HEAD cleanups in subsystem. - qDMA controller driver for Layerscape SoCs - stm32-dma PM Runtime support - And usual updates to imx-sdma, sprd, Documentation, fsl-edma, bcm2835, qcom_hidma etc * tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (81 commits) dmaengine: imx-sdma: fix consistent dma test failures dmaengine: imx-sdma: add a test for imx8mq multi sdma devices dmaengine: imx-sdma: add clock ratio 1:1 check dmaengine: dmatest: move test data alloc & free into functions dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func() dmaengine: dmatest: wrap src & dst data into a struct dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4 dmaengine: ioatdma: add descriptor pre-fetch support for v3.4 dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4 dmaengine: ioatdma: Add Snow Ridge ioatdma device id dmaengine: sprd: Change channel id to slave id for DMA cell specifier dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier dmaengine: mv_xor: Use correct device for DMA API Documentation :dmaengine: clarify DMA desc. pointer after submission Documentation: dmaengine: fix dmatest.rst warning dmaengine: k3dma: Add support for dma-channel-mask dmaengine: k3dma: Delete axi_config dmaengine: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware Documentation: bindings: dma: Add binding for dma-channel-mask Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp ...
2019-02-25dmaengine: dmatest: move test data alloc & free into functionsAlexandru Ardelean
This patch starts to take advantage of the `dmatest_data` struct by moving the common allocation & free-ing bits into functions. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-02-25dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func()Alexandru Ardelean
This is just a cosmetic change, since this variable gets used quite a bit inside the dmatest_func() routine. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-02-25dmaengine: dmatest: wrap src & dst data into a structAlexandru Ardelean
This change wraps the data for the source & destination buffers into a `struct dmatest_data`. The rename patterns are: * src_cnt -> src->cnt * dst_cnt -> dst->cnt * src_off -> src->off * dst_off -> dst->off * thread->srcs -> src->aligned * thread->usrcs -> src->raw * thread->dsts -> dst->aligned * thread->udsts -> dst->raw The intent is to make a function that moves duplicate parts of the code into common alloc & free functions, which will unclutter the `dmatest_func()` function. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-02-04dmaengine: dmatest: Abort test in case of mapping errorAndy Shevchenko
In case of mapping error the DMA addresses are invalid and continuing will screw system memory or potentially something else. [ 222.480310] dmatest: dma0chan7-copy0: summary 1 tests, 3 failures 6 iops 349 KB/s (0) ... [ 240.912725] check: Corrupted low memory at 00000000c7c75ac9 (2940 phys) = 5656000000000000 [ 240.921998] check: Corrupted low memory at 000000005715a1cd (2948 phys) = 279f2aca5595ab2b [ 240.931280] check: Corrupted low memory at 000000002f4024c0 (2950 phys) = 5e5624f349e793cf ... Abort any test if mapping failed. Fixes: 4076e755dbec ("dmatest: convert to dmaengine_unmap_data") Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-17dmaengine: dmatest: Add transfer_size parameterSeraj Alijan
Existing transfer size "len" is either generated randomly or set to the size of test_buf_size. In some cases we need to explicitly specify a transfer size that is different from the buffer size and non aligned to test the target device's ability to handle unaligned transfers. This patch adds optional parameter "transfer_size" to allow setting explicit transfer size for dma transfers. Signed-off-by: Seraj Alijan <seraj.alijan@sondrel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-17dmaengine: dmatest: Add alignment parameterSeraj Alijan
Add parameter "alignment" to allow setting the address alignment manually. Having the ability to configure address alignment from user space adds new testing capabilities where different alignments can be configured for testing without having to modify the dma device alignment properties. If configured, the alignment value will override the device alignment property of the target device. Signed-off-by: Seraj Alijan <seraj.alijan@sondrel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-17dmaengine: dmatest: Use fixed point div to calculate iopsSeraj Alijan
Use fixed point division to calculate iops to prevent reporting 0 iops when operations last for longer than a second. Signed-off-by: Seraj Alijan <seraj.alijan@sondrel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-17dmaengine: dmatest: Add support for multi channel testingSeraj Alijan
Add support for running tests on multiple channels simultaneously as the driver currently limits to 1 channel per test run. This will add support for stress testing DMA controllers with multi channel capabilities. This is done by adding a callback function to the "channel" parameter that registers the requested channel prior to the "run" parameter being set to 1. Each time the "channel" parameter is populated with a new dma channel, a new test is appended to the thread queue. Once the "run" parameter is set to 1, the test will kick start all pending threads. Signed-off-by: Seraj Alijan <seraj.alijan@sondrel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-05dmaengine: dmatest: fix a small memory leak in dmatest_func()Dan Carpenter
We recently moved the test size tests around but it means we need to adjust the error handling as well or we leak the "pq_coefs" memory. I updated the label name to reflect that we're freeing coefs. Fixes: 787d3083caf8 ("dmaengine: dmatest: move size checks earlier in function") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-11-24dmaengine: dmatest: move size checks earlier in functionAlexandru Ardelean
There's no need to allocate all that memory if these sizes are invalid anyway. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-11-24dmaengine: dmatest: use dmaengine_terminate_sync() insteadAlexandru Ardelean
The `dmaengine_terminate_all()` is marked as deprecated, so update the test with `dmaengine_terminate_sync()` which is the recommended alternative. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-11-24dmaengine: dmatest: unmap data on a single code-path when xfer doneAlexandru Ardelean
After the DMA transfer is done, we don't need to call the un-mapping code in 3 places. One is enough. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-04-16dmaengine: dmatest: Remove use of VLAsLaura Abbott
There's an ongoing effort to remove VLAs from the kernel (https://lkml.org/lkml/2018/3/7/621) to eventually turn on -Wvla. The test already pre-allocates some buffers with kmalloc so turn the two VLAs in to pre-allocated kmalloc buffers. Signed-off-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-02-12dmaengine: dmatest: add norandom optionYang Shunyong
Existing option noverify disables both random src/dst address offset setup and data verification. Sometimes, we need to control random src/dst address setup and verification separately, such as disabling random to make sure that test covers addresses in all interleaving banks, but data verification is still performed. This patch adds option norandom to disable random offset setup. Option noverify has been changed to disable data verification only. Cc: Joey Zheng <yu.zheng@hxt-semitech.com> Signed-off-by: Yang Shunyong <shunyong.yang@hxt-semitech.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-30dmaengine: dmatest: fix container_of member in dmatest_callbackYang Shunyong
The type of arg passed to dmatest_callback is struct dmatest_done. It refers to test_done in struct dmatest_thread, not done_wait. Fixes: 6f6a23a213be ("dmaengine: dmatest: move callback wait ...") Signed-off-by: Yang Shunyong <shunyong.yang@hxt-semitech.com> Acked-by: Adam Wallis <awallis@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-12-11dmaengine: dmatest: move callback wait queue to thread contextAdam Wallis
Commit adfa543e7314 ("dmatest: don't use set_freezable_with_signal()") introduced a bug (that is in fact documented by the patch commit text) that leaves behind a dangling pointer. Since the done_wait structure is allocated on the stack, future invocations to the DMATEST can produce undesirable results (e.g., corrupted spinlocks). Commit a9df21e34b42 ("dmaengine: dmatest: warn user when dma test times out") attempted to WARN the user that the stack was likely corrupted but did not fix the actual issue. This patch fixes the issue by pushing the wait queue and callback structs into the the thread structure. If a failure occurs due to time, dmaengine_terminate_all will force the callback to safely call wake_up_all() without possibility of using a freed pointer. Cc: stable@vger.kernel.org Bug: https://bugzilla.kernel.org/show_bug.cgi?id=197605 Fixes: adfa543e7314 ("dmatest: don't use set_freezable_with_signal()") Reviewed-by: Sinan Kaya <okaya@codeaurora.org> Suggested-by: Shunyong Yang <shunyong.yang@hxt-semitech.com> Signed-off-by: Adam Wallis <awallis@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-08dmaengine: dmatest: warn user when dma test times outAdam Wallis
Commit adfa543e7314 ("dmatest: don't use set_freezable_with_signal()") introduced a bug (that is in fact documented by the patch commit text) that leaves behind a dangling pointer. Since the done_wait structure is allocated on the stack, future invocations to the DMATEST can produce undesirable results (e.g., corrupted spinlocks). Ideally, this would be cleaned up in the thread handler, but at the very least, the kernel is left in a very precarious scenario that can lead to some long debug sessions when the crash comes later. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197605 Signed-off-by: Adam Wallis <awallis@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-08-22dmaengine: remove DMA_SG as it is dead code in kernelDave Jiang
There are no in kernel consumers for DMA_SG op. Removing operation, dead code, and test code in dmatest. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Gary Hook <gary.hook@amd.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Kedareswara rao Appana <appana.durga.rao@xilinx.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-07-18dmaengine: dmatest: add support for memset testSinan Kaya
Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-01dmaengine: dmatest: Add check for supported buffer count (sg_buffers)Stefan Roese
When using dmatest with sg_buffers=128 I stumbled upon the problem, that the "map_cnt" variable of "struct dmaengine_unmap_data" was set to 0. "map_cnt" is an "u8" variable, resulting in an overrun when its value is set to src_cnt + dst_cnt, to twice the sg_buffer value. This patch adds a small check to dmatest, so that this confusing error is detected and the test is aborted. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Kedareswara rao Appana <appanad@xilinx.com> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-04-24dmaengine: dmatest: use offset_in_page() macroGeliang Tang
Use offset_in_page() macro instead of open-coding. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-02sched/headers: Prepare to move the get_task_struct()/put_task_struct() and ↵Ingo Molnar
related APIs from <linux/sched.h> to <linux/sched/task.h> But first update usage sites with the new header dependency. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-11-30dmaengine: dmatest: honor alignment restriction for buffersDave Jiang
Existing implementation does not honor the alignment restrictions imposed by the DMA engines. Allocate buffers with built in slack for honoring alignment restrictions. Creating new arrays to hold the aligned pointers and use those pointers for operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30dmaengine: fix spacing issues for dmatestDave Jiang
Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-15dmaengine: dmatest: Restore "memcpy" as default modeEugeniy Paltsev
Commit 0d4cb44da6ca0e8 ("dmaengine: dmatest: Add support for scatter-gather DMA mode") changes default "dmatest" behavior by changing default mode from "memcpy" to "scatter-gather". Now "memcpy" gets back as default mode. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-09dmaengine: dmatest: Apply copy_align to DMA_SG as wellNicolin Chen
The DMA_SG is still a type of memory copy operation that should conform the hardware restriction. So this patch just applies the copy_align to DMA_SG as well. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-02dmaengine: dmatest: exclude compare and fill time during perf reportSinan Kaya
Dmatest is currently including compare and fill time into the calculated performance numbers. This does not reflect the HW capability and the results vary based on the CPU speed instead of the HW speed. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-16dmaengine: dmatest: Add support for scatter-gather DMA modeKedareswara rao Appana
This patch updates the dmatest client to Support scatter-gather dma mode. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-28kernel/params: constify struct kernel_param_ops usesLuis R. Rodriguez
Most code already uses consts for the struct kernel_param_ops, sweep the kernel for the last offending stragglers. Other than include/linux/moduleparam.h and kernel/params.c all other changes were generated with the following Coccinelle SmPL patch. Merge conflicts between trees can be handled with Coccinelle. In the future git could get Coccinelle merge support to deal with patch --> fail --> grammar --> Coccinelle --> new patch conflicts automatically for us on patches where the grammar is available and the patch is of high confidence. Consider this a feature request. Test compiled on x86_64 against: * allnoconfig * allmodconfig * allyesconfig @ const_found @ identifier ops; @@ const struct kernel_param_ops ops = { }; @ const_not_found depends on !const_found @ identifier ops; @@ -struct kernel_param_ops ops = { +const struct kernel_param_ops ops = { }; Generated-by: Coccinelle SmPL Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Junio C Hamano <gitster@pobox.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: cocci@systeme.lip6.fr Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-04dmatest: move src_off, dst_off, len inside loopAndy Shevchenko
The scope of those varsiables is in while-loop. This patch moves them there and removes duplicate code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-04dmatest: fix indentationAndy Shevchenko
Simple fixes an indentation in few places across the code. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-07Merge tag 'dmaengine-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine Pull dmaengine updates from Dan Williams: "Even though this has fixes marked for -stable, given the size and the needed conflict resolutions this is 3.18-rc1/merge-window material. These patches have been languishing in my tree for a long while. The fact that I do not have the time to do proper/prompt maintenance of this tree is a primary factor in the decision to step down as dmaengine maintainer. That and the fact that the bulk of drivers/dma/ activity is going through Vinod these days. The net_dma removal has not been in -next. It has developed simple conflicts against mainline and net-next (for-3.18). Continuing thanks to Vinod for staying on top of drivers/dma/. Summary: 1/ Step down as dmaengine maintainer see commit 08223d80df38 "dmaengine maintainer update" 2/ Removal of net_dma, as it has been marked 'broken' since 3.13 (commit 77873803363c "net_dma: mark broken"), without reports of performance regression. 3/ Miscellaneous fixes" * tag 'dmaengine-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine: net: make tcp_cleanup_rbuf private net_dma: revert 'copied_early' net_dma: simple removal dmaengine maintainer update dmatest: prevent memory leakage on error path in thread ioat: Use time_before_jiffies() dmaengine: fix xor sources continuation dma: mv_xor: Rename __mv_xor_slot_cleanup() to mv_xor_slot_cleanup() dma: mv_xor: Remove all callers of mv_xor_slot_cleanup() dma: mv_xor: Remove unneeded mv_xor_clean_completed_slots() call ioat: Use pci_enable_msix_exact() instead of pci_enable_msix() drivers: dma: Include appropriate header file in dca.c drivers: dma: Mark functions as static in dma_v3.c dma: mv_xor: Add DMA API error checks ioat/dca: Use dev_is_pci() to check whether it is pci device
2014-08-22dmatest: prevent memory leakage on error path in threadAndy Shevchenko
When we fail to allocate memory for thread->srcs or thread->dsts and src_cnt or dst_cnt great than 1 we leak memory on error path. This patch fixes the issue. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2014-03-26Add new line to test result strings produced in verbose modeJerome Blin
Prevents test result strings from being output on same line. Issue will happen with verbose and multi-iteration modes enabled. Signed-off-by: Jerome Blin <jerome.blin@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-29Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dma updates from Vinod Koul: - new driver for BCM2835 used in R-pi - new driver for MOXA ART - dma_get_any_slave_channel API for DT based systems - minor fixes and updates spread acrooss driver [ The fsl-ssi dual fifo mode support addition clashed badly with the other changes to fsl-ssi that came in through the sound merge. I did a very rough cut at fixing up the conflict, but Nicolin Chen (author of both sides) will need to verify and check things ] * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: mmp_pdma: fix mismerge dma: pl08x: Export pl08x_filter_id acpi-dma: align documentation with kernel-doc format dma: fix vchan_cookie_complete() debug print DMA: dmatest: extend the "device" module parameter to 32 characters drivers/dma: fix error return code dma: omap: Set debug level to debugging messages dmaengine: fix kernel-doc style typos for few comments dma: tegra: add support for Tegra148/124 dma: dw: use %pad instead of casting dma_addr_t dma: dw: join split up messages dma: dw: fix style of multiline comment dmaengine: k3dma: fix sparse warnings dma: pl330: Use dma_get_slave_channel() in the of xlate callback dma: pl330: Differentiate between submitted and issued descriptors dmaengine: sirf: Add device_slave_caps interface DMA: Freescale: change BWC from 256 bytes to 1024 bytes dmaengine: Add MOXA ART DMA engine driver dmaengine: Add DMA_PRIVATE to BCM2835 driver dma: imx-sdma: Assign a default script number for ROM firmware cases ...
2014-01-20DMA: dmatest: extend the "device" module parameter to 32 charactersGuennadi Liakhovetski
With Device Tree a typical DMA controller device name can look like 10000000.dma-controller, which extends the current size of the string, allocated for this parameter. This patch extends its size from 20 to 32 characters. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-12dmatest: fix build warning on mipsDan Williams
drivers/dma/dmatest.c:543:11: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast [enabled by default] mips expects virt_to_phys() to take a pointer. Fix up the types accordingly. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-16Merge commit 'dmaengine-3.13-v2' of ↵Vinod Koul
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine Pull dmaengine changes from Dan 1/ Bartlomiej and Dan finalized a rework of the dma address unmap implementation. 2/ In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus for their review. 3/ Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. 4/ Some minor fixes / cleanups to mv_xor and ioatdma. Conflicts: drivers/dma/dmatest.c Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-14dmatest: verbose modeDan Williams
Verbose mode turns on test success messages, by default we only output test summaries and failure results. Also cleaned up some stray quotes, leftover from putting the result message format string all on one line. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmatest: convert to dmaengine_unmap_dataDan Williams
Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmatest: add a 'wait' parameterDan Williams
Allows for scripting test runs by module load / unload. Prevent module load from returning until 'iterations' (finite) tests have completed, or cause reads of the 'wait' parameter in sysfs to pause until the tests are done. Also killed the local waitqueue since we can just let the thread exit naturally as long as we hold a reference. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmatest: add basic performance metricsDan Williams
Add iops and throughput to the summary output. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmatest: add support for skipping verification and random data setupDan Williams
Towards enabling dmatest to checkout performance add a 'noverify' mode. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmatest: use pseudo random numbersDan Williams
There is no need for dmatest to drain the entropy pool. It would be nice to one day have repeatable runs, but would need a larger rework to synchronize and order calls to the rng across test threads. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>