summaryrefslogtreecommitdiff
path: root/drivers/dma/edma.c
AgeCommit message (Collapse)Author
2017-11-14Merge tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "Updates for this cycle include: - new driver for Spreadtrum dma controller, ST MDMA and DMAMUX controllers - PM support for IMG MDC drivers - updates to bcm-sba-raid driver and improvements to sun6i driver - subsystem conversion for: - timers to use timer_setup() - remove usage of PCI pool API - usage of %p format specifier - minor updates to bunch of drivers" * tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (49 commits) dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type dmaengine: dmatest: warn user when dma test times out dmaengine: Revert "rcar-dmac: use TCRB instead of TCR for residue" dmaengine: stm32_mdma: activate pack/unpack feature dmaengine: at_hdmac: Remove unnecessary 0x prefixes before %pad dmaengine: coh901318: Remove unnecessary 0x prefixes before %pad MAINTAINERS: Step down from a co-maintaner of DW DMAC driver dmaengine: pch_dma: Replace PCI pool old API dmaengine: Convert timers to use timer_setup() dmaengine: sprd: Add Spreadtrum DMA driver dt-bindings: dmaengine: Add Spreadtrum SC9860 DMA controller dmaengine: sun6i: Retrieve channel count/max request from devicetree dmaengine: Build bcm-sba-raid driver as loadable module for iProc SoCs dmaengine: bcm-sba-raid: Use common GPL comment header dmaengine: bcm-sba-raid: Use only single mailbox channel dmaengine: bcm-sba-raid: serialize dma_cookie_complete() using reqs_lock dmaengine: pl330: fix descriptor allocation fail dmaengine: rcar-dmac: use TCRB instead of TCR for residue dmaengine: sun6i: Add support for Allwinner A64 and compatibles arm64: allwinner: a64: Add devicetree binding for DMA controller ...
2017-10-12dmaengine: edma: Implement protection for invalid max_burstPeter Ujfalusi
the device's max_burst to 32767 (CIDX is 16bit signed value) so clients can take this into consideration when setting up the transfer. During slave transfer preparation check if the requested maxburst is valid. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-09-21dmaengine: edma: Align the memcpy acnt array size with the transferPeter Ujfalusi
Memory to Memory transfers does not have any special alignment needs regarding to acnt array size, but if one of the areas are in memory mapped regions (like PCIe memory), we need to make sure that the acnt array size is aligned with the mem copy parameters. Before "dmaengine: edma: Optimize memcpy operation" change the memcpy was set up in a different way: acnt == number of bytes in a word based on __ffs((src | dest | len), bcnt and ccnt for looping the necessary number of words to comlete the trasnfer. Instead of reverting the commit we can fix it to make sure that the ACNT size is aligned to the traswnfer. Fixes: df6694f80365a (dmaengine: edma: Optimize memcpy operation) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-12-14Merge tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "Fairly routine update this time around with all changes specific to drivers: - New driver for STMicroelectronics FDMA - Memory-to-memory transfers on dw dmac - Support for slave maps on pl08x devices - Bunch of driver fixes to use dma_pool_zalloc - Bunch of compile and warning fixes spread across drivers" [ The ST FDMA driver already came in earlier through the remoteproc tree ] * tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: sirf-dma: remove unused ‘sdesc’ dmaengine: pl330: remove unused ‘regs’ dmaengine: s3c24xx: remove unused ‘cdata’ dmaengine: stm32-dma: remove unused ‘src_addr’ dmaengine: stm32-dma: remove unused ‘dst_addr’ dmaengine: stm32-dma: remove unused ‘sfcr’ dmaengine: pch_dma: remove unused ‘cookie’ dmaengine: mic_x100_dma: remove unused ‘data’ dmaengine: img-mdc: remove unused ‘prev_phys’ dmaengine: usb-dmac: remove unused ‘uchan’ dmaengine: ioat: remove unused ‘res’ dmaengine: ioat: remove unused ‘ioat_dma’ dmaengine: ioat: remove unused ‘is_raid_device’ dmaengine: pl330: do not generate unaligned access dmaengine: k3dma: move to dma_pool_zalloc dmaengine: at_hdmac: move to dma_pool_zalloc dmaengine: at_xdmac: don't restore unsaved status dmaengine: ioat: set error code on failures dmaengine: ioat: set error code on failures dmaengine: DW DMAC: add multi-block property to device tree ...
2016-11-30dmaengine: edma: re-initialize dummy slot during system resumeVignesh R
The last param set in a transfer should always be pointing to dummy param set in non-cyclic mode. When system wakes from low power state EDMA PARAM slots may be reset to random values. Hence, re-initialize dummy slot to dummy param set on system resume. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-18dmaengine: edma: Fix error return code in edma_alloc_chan_resources()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-03Merge branch 'topic/compile_test' into for-linusVinod Koul
2016-09-30dmaengine: edma: avoid uninitialized variable useArnd Bergmann
If edma_read_slot() gets an invalid argument, it does not set a result, as found by "gcc -Wmaybe-uninitialized" drivers/dma/edma.c: In function 'dma_ccerr_handler': drivers/dma/edma.c:1499:21: error: 'p.a_b_cnt' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/dma/edma.c:1499:21: error: 'p.ccnt' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (p.a_b_cnt == 0 && p.ccnt == 0) { If we change the function to return an error in this case, we can handle the failure more gracefully and treat this the same way as a null slot that we already catch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-28dmaengine: edma: Rename set_bits and remove unused clear_bits helperPeter Ujfalusi
The clear_bits() helper is not used by the driver so it can be removed. powerpc architecture defines the set_bits() in arch/powerpc/include/asm/bitops.h which results failed compile testing on powerpc architecture: >> drivers/dma/edma.c:415:20: error: conflicting types for 'set_bits' static inline void set_bits(int offset, int len, unsigned long *p) ^~~~~~~~ In file included from include/linux/bitops.h:36:0, from include/linux/kernel.h:10, from include/linux/list.h:8, from include/linux/kobject.h:20, from include/linux/device.h:17, from include/linux/dmaengine.h:20, from drivers/dma/edma.c:16: arch/powerpc/include/asm/bitops.h:75:14: note: previous definition of 'set_bits' was here DEFINE_BITOP(set_bits, or, "") ^ arch/powerpc/include/asm/bitops.h:58:24: note: in definition of macro 'DEFINE_BITOP' static __inline__ void fn(unsigned long mask, \ ^~ >> drivers/dma/edma.c:421:20: error: conflicting types for 'clear_bits' static inline void clear_bits(int offset, int len, unsigned long *p) ^~~~~~~~~~ In file included from include/linux/bitops.h:36:0, from include/linux/kernel.h:10, from include/linux/list.h:8, from include/linux/kobject.h:20, from include/linux/device.h:17, from include/linux/dmaengine.h:20, from drivers/dma/edma.c:16: arch/powerpc/include/asm/bitops.h:76:14: note: previous definition of 'clear_bits' was here DEFINE_BITOP(clear_bits, andc, "") ^ arch/powerpc/include/asm/bitops.h:58:24: note: in definition of macro 'DEFINE_BITOP' static __inline__ void fn(unsigned long mask, \ ^~ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-28dmaengine: edma: Use correct type for of_find_property() third parameterPeter Ujfalusi
The correct type is int and not for the third parameter of of_find_property(). Fixes compilation for 64bit architectures (x86_64, aarch64). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-28dmaengine: edma: Fix of_device_id data parameter usage (legacy vs TPCC)Peter Ujfalusi
Use pointers to static constant variables for eDMA binding type (legacy vs TPCC). Fixes the following warning when compiling the driver for 64bit architectures (x86_64 for example): drivers/dma/edma.c:2185:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] if (match && (u32)match->data == EDMA_BINDING_TPCC) ^ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-28dmaengine: edma: Add missing MODULE_DEVICE_TABLE() for of_device_id structsPeter Ujfalusi
The MODULE_DEVICE_TABLE() were missing from the driver for the of_device_id structures. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-16dmaengine: edma: kill the tasklets upon exitVinod Koul
drivers should ensure that tasklets are killed, so that they can't be executed after driver remove is executed, so ensure they are killed. This driver used vchan tasklets, so those need to be killed. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-07-16dmaengine: edma: explicitly freeup irqVinod Koul
dmaengine device should explicitly call devm_free_irq() when using devm_request_irq(). The irq is still ON when devices remove is executed and irq should be quiesced before remove is completed. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-07-16Merge branch 'topic/edma' into for-linusVinod Koul
2016-06-21dmaengine: Remove site specific OOM error messages on kzallocPeter Griffin
If kzalloc() fails it will issue it's own error message including a dump_stack(). So remove the site specific error messages. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-08dmaengine: edma: Use early completion for intermediate paRAM set in slave_sgPeter Ujfalusi
The driver limits the physical number of paRAM slots to be used by channels. If the transfer needs more slots (more SGs) then the transfer is broken up to smaller chunks. When the chunk is finished the driver will rewrite the physical slots and continues the transfer. This set up time can take some time and we might miss DMA events. If the intermediate set completion is using early completion (the interrupt will happen when the last slot is issued to the TPTC and not when the transfer is finished by the TPTC) we will have a bit more time to update the paRAM slots and less likely to have missed events. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-19Merge tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This time round the update brings in following changes: - new tegra driver for ADMA device - support for Xilinx AXI Direct Memory Access Engine and Xilinx AXI Central Direct Memory Access Engine and few updates to this driver - new cyclic capability to sun6i and few updates - slave-sg support in bcm2835 - updates to many drivers like designware, hsu, mv_xor, pxa, edma, qcom_hidma & bam" * tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (84 commits) dmaengine: ioatdma: disable relaxed ordering for ioatdma dmaengine: of_dma: approximate an average distribution dmaengine: core: Use IS_ENABLED() instead of checking for built-in or module dmaengine: edma: Re-evaluate errors when ccerr is triggered w/o error event dmaengine: qcom_hidma: add support for object hierarchy dmaengine: qcom_hidma: add debugfs hooks dmaengine: qcom_hidma: implement lower level hardware interface dmaengine: vdma: Add clock support Documentation: DT: vdma: Add clock support for dmas dmaengine: vdma: Add config structure to differentiate dmas MAINTAINERS: Update Tegra DMA maintainers dmaengine: tegra-adma: Add support for Tegra210 ADMA Documentation: DT: Add binding documentation for NVIDIA ADMA dmaengine: vdma: Add Support for Xilinx AXI Central Direct Memory Access Engine Documentation: DT: vdma: update binding doc for AXI CDMA dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine Documentation: DT: vdma: update binding doc for AXI DMA dmaengine: vdma: Rename xilinx_vdma_ prefix to xilinx_dma dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC dmaengine: mv_xor: Allow selecting mv_xor for mvebu only compatible SoC ...
2016-05-14dmaengine: edma: Re-evaluate errors when ccerr is triggered w/o error eventPeter Ujfalusi
When the ccerr handler is called but the error registers indicate no error events we need to command eDMA to re-evaluate the errors. Otherwise we can receive flood of error interrupts. Reported-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-06dmaengine: edma: special case slot limit workaroundJohn Ogness
Currently drivers are limited to 19 slots for cyclic transfers. However, if the DMA burst size is the same as the period size, the period size can be changed to the full buffer size and intermediate interrupts activated. Since intermediate interrupts will trigger for each burst and the burst size is the same as the period size, the driver will get interrupts each period as expected. This has the benefit of allowing the functionality of many more slots, but only uses 2 slots. This workaround is only active if more than 19 slots are needed and the burst size matches the period size. Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-06dmaengine: edma: Remove dynamic TPTC power management featurePeter Ujfalusi
The dynamic or on demand pm_runtime does not work correctly on am335x and am437x due to interference with hwmod. Fall back using the pm_runtime usage as it was in the old driver stack, meaning that at probe time call pm_runtime_enable() and pm_runtime_get_sync() for the TPTCs as well. Fixes: 1be5336bc7ba ("dmaengine: edma: New device tree binding") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reported-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-03-17Merge tag 'dmaengine-4.6-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This is smallish update with minor changes to core and new driver and usual updates. Nothing super exciting here.. - We have made slave address as physical to enable driver to do the mapping. - We now expose the maxburst for slave dma as new capability so clients can know this and program accordingly - addition of device synchronize callbacks on omap and edma. - pl330 updates to support DMAFLUSHP for Rockchip platforms. - Updates and improved sg handling in Xilinx VDMA driver. - New hidma qualcomm dma driver, though some bits are still in progress" * tag 'dmaengine-4.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (40 commits) dmaengine: IOATDMA: revise channel reset workaround on CB3.3 platforms dmaengine: add Qualcomm Technologies HIDMA channel driver dmaengine: add Qualcomm Technologies HIDMA management driver dmaengine: hidma: Add Device Tree binding dmaengine: qcom_bam_dma: move to qcom directory dmaengine: tegra: Move of_device_id table near to its user dmaengine: xilinx_vdma: Remove unnecessary variable initializations dmaengine: sirf: use __maybe_unused to hide pm functions dmaengine: rcar-dmac: clear pertinence number of channels dmaengine: sh: shdmac: don't open code of_device_get_match_data() dmaengine: tegra: don't open code of_device_get_match_data() dmaengine: qcom_bam_dma: Make driver work for BE dmaengine: sun4i: support module autoloading dma/mic_x100_dma: IS_ERR() vs PTR_ERR() typo dmaengine: xilinx_vdma: Use readl_poll_timeout instead of do while loop's dmaengine: xilinx_vdma: Simplify spin lock handling dmaengine: xilinx_vdma: Fix issues with non-parking mode dmaengine: xilinx_vdma: Improve SG engine handling dmaengine: pl330: fix to support the burst mode dmaengine: make slave address physical ...
2016-02-22dmaengine: edma: Fetch echan->edesc while holding lock in edma_comletion_handlerPeter Ujfalusi
In order to avoid possible race condition when client drivers are using dmaengine_terminate_sync() call to disable the channel. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Suggested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-02-22dmaengine: edma: Implement device_synchronize callbackPeter Ujfalusi
We need the callback to support the dmaengine_terminate_sync(). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-02-08dmaengine: edma: fix residue race for cyclicJohn Ogness
When retrieving the residue value, the SRC/DST fields of the active PaRAM are read to determine the current position of the DMA engine. However, the AM335x Technical Reference Manual states: 11.3.3.6 Parameter Set Updates After the TR is read from the PaRAM (and is in the process of being submitted to the EDMA3TC), the following fields are updated as needed: ... SRC DST This means SRC/DST is incremented even though the DMA transfer may not have started yet or is in progress. Thus if the reader of the residue accesses the DMA buffer too quickly, the CPU is misinformed about the data that has been successfully processed. The CCSTAT.ACTV register is a boolean that is set if any TR is being processed by either the EMDA3CC or EDMA3TC. By polling this register it is possible to ensure that the residue value returned is valid for immediate processing. However, since the DMA engine may be active, polling may never hit a moment where no TR is being processed. To handle this, the SRC/DST is also polled to see if it changes. And as a last resort, a max loop count for the busy waiting exists to avoid an infinite loop. Signed-off-by: John Ogness <john.ogness@linutronix.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-01-20Merge tag 'dmaengine-fix-4.5-rc1' of ↵Linus Torvalds
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "Here is my second pull request for this window: A few driver fixes have piled up and one missed rcar bindings patch which got somehow lost in for-linus branch so cherry-picked that one. Fixes are for dw, at_hdmac, edma" * tag 'dmaengine-fix-4.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: rcar-dmac: Document SoC specific bindings dmaengine: at_xdmac: fix resume for cyclic transfers dmaengine: dw: fix cyclic transfer callbacks dmaengine: dw: fix cyclic transfer setup dmaengine: edma: Fix paRAM slot allocation for entry channel 0
2016-01-13Merge tag 'dmaengine-4.5-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This round we have few new features, new driver and updates to few drivers. The new features to dmaengine core are: - Synchronized transfer termination API to terminate the dmaengine transfers in synchronized and async fashion as required by users. We have its user now in ALSA dmaengine lib, img, at_xdma, axi_dmac drivers. - Universal API for channel request and start consolidation of request flows. It's user is ompa-dma driver. - Introduce reuse of descriptors and use in pxa_dma driver Add/Remove: - New STM32 DMA driver - Removal of unused R-Car HPB-DMAC driver Updates: - ti-dma-crossbar updates for supporting eDMA - tegra-apb pm updates - idma64 - mv_xor updates - ste_dma updates" * tag 'dmaengine-4.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (54 commits) dmaengine: mv_xor: add suspend/resume support dmaengine: mv_xor: de-duplicate mv_chan_set_mode*() dmaengine: mv_xor: remove mv_xor_chan->current_type field dmaengine: omap-dma: Add support for DMA filter mapping to slave devices dmaengine: edma: Add support for DMA filter mapping to slave devices dmaengine: core: Introduce new, universal API to request a channel dmaengine: core: Move and merge the code paths using private_candidate dmaengine: core: Skip mask matching when it is not provided to private_candidate dmaengine: mdc: Correct terminate_all handling dmaengine: edma: Add probe callback to edma_tptc_driver dmaengine: dw: fix potential memory leak in dw_dma_parse_dt() dmaengine: stm32-dma: Fix unchecked deference of chan->desc dmaengine: sh: Remove unused R-Car HPB-DMAC driver dmaengine: usb-dmac: Document SoC specific compatibility strings ste_dma40: Delete an unnecessary variable initialisation in d40_probe() ste_dma40: Delete another unnecessary check in d40_probe() ste_dma40: Delete an unnecessary check before the function call "kmem_cache_destroy" dmaengine: tegra-apb: Free interrupts before killing tasklets dmaengine: tegra-apb: Update driver to use GFP_NOWAIT dmaengine: tegra-apb: Only save channel state for those in use ...
2016-01-13dmaengine: edma: Fix paRAM slot allocation for entry channel 0Peter Ujfalusi
edma_alloc_slot was not checking the channel mapping support existence when slot 0 has been requested (used as entry slot for channel/event 0). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-01-06Merge branch 'topic/univ_api' into for-linusVinod Koul
2015-12-18dmaengine: edma: Add support for DMA filter mapping to slave devicesPeter Ujfalusi
Add support for providing device to filter_fn mapping so client drivers can switch to use the dma_request_chan() API. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-18dmaengine: edma: Add probe callback to edma_tptc_driverPeter Ujfalusi
Due to changes in device and platform code drivers w/o probe will fail to load. This means that the devices for eDMA TPTCs are goign to be without driver and omap hwmod code will turn them off after the kernel finished loading: [ 3.015900] platform 49800000.tptc: omap_device_late_idle: enabled but no driver. Idling [ 3.024671] platform 49a00000.tptc: omap_device_late_idle: enabled but no driver. Idling This will prevent eDMA to work since the TPTCs are not enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Fixes: 34635b1accb9 ("dmaengine: edma: Add dummy driver skeleton for edma3-tptc") Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-10Merge branch 'fix/edma' into fixesVinod Koul
2015-12-10dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit typePeter Ujfalusi
This change makes the DT file to be easier to read since the reserved slots array does not need the '/bits/ 16' to be specified, which might confuse some people. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-10dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit typePeter Ujfalusi
This change makes the DT file to be easier to read since the memcpy channels array does not need the '/bits/ 16' to be specified, which might confuse some people. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-11-16dmaengine: edma: predecence bug in GET_NUM_QDMACH()Dan Carpenter
The current code uses bits 0-2 instead of 4-6 as the comment says. Fixes: 633e42b8c546 ('dmaengine: edma: Get qDMA channel information from HW also') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-11-16dmaengine: edma: fix build without CONFIG_OFArnd Bergmann
During the edma rework, a build error was introduced for the case that CONFIG_OF is disabled: drivers/built-in.o: In function `edma_tc_set_pm_state': :(.text+0x43bf0): undefined reference to `of_find_device_by_node' As the edma_tc_set_pm_state() function does nothing in case we are running without OF, this adds an IS_ENABLED() check that turns the function into an empty stub then and avoids the link error. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ca304fa9bb76 ("ARM/dmaengine: edma: Public API to use private struct pointer") Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-11-04dmaengine: edma: Add dummy driver skeleton for edma3-tptcPeter Ujfalusi
The eDMA3 TPTC does not need any software configuration, but it is a separate IP block in the SoC. In order the omap hwmod core to be able to handle the TPTC resources correctly in regards of PM we need to have a driver loaded for it. This patch will add a dummy driver skeleton without probe or remove callbacks provided. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reported-by: Olof Johansson <olof@lixom.net> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-27dmaengine: edma: New device tree bindingPeter Ujfalusi
With the old binding and driver architecture we had many issues: No way to assign eDMA channels to event queues, thus not able to tune the system by moving specific DMA channels to low/high priority servicing. We moved the cyclic channels to high priority within the code, but that was just a workaround to this issue. Memcopy was fundamentally broken: even if the driver scanned the DT/devices in the booted system for direct DMA users (which is not effective when the events are going through a crossbar) and created a map of 'used' channels, this information was not really usable. Since via dmaengien API the eDMA driver will be called with _some_ channel number, we would try to request this channel when any channel is requested for memcpy. By luck we got channel which is not used by any device most of the time so things worked, but if a device would have been using the given channel, but not requested it, the memcpy channel would have been waiting for HW event. The old code had the am33xx/am43xx DMA event router handling embedded. This should have been done in a separate driver since it is not part of the actual eDMA IP. There were no way to 'lock' PaRAM slots to be used by the DSP for example when booting with DT. In DT boot the edma node used more than one hwmod which is not a good practice and the kernel prints warning because of this. With the new bindings and the changes in the driver we can: - No regression with Legacy binding and non DT boot - DMA channels can be assigned to any TC (to set priority) - PaRAM slots can be reserved for other cores to use - Dynamic power management for CC and TCs, if only TC0 is used all other TC can be powered down for example Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-27dmaengine: edma: Merge the of parsing functionsPeter Ujfalusi
Instead of nesting functions just merge them since the resulting function is still small and readable. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-27dmaengine: edma: Do not allocate memory for edma_rsv_info in case of DT bootPeter Ujfalusi
The channel/slot reservation is not supported when booted with DT so there is not need to allocate memory. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-27dmaengine: edma: Refactor the dma device and channel struct initializationPeter Ujfalusi
Move all code under one function to do the dma device and eDMA channel related setup so they are not scattered around the driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-27dmaengine: edma: Get qDMA channel information from HW alsoPeter Ujfalusi
Query the number of qDMA channels from CCCFG register. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-27dmaengine: edma: Merge map_dmach_to_queue into assign_channel_eventqPeter Ujfalusi
edma_assign_channel_eventq() is a wrapper around edma_map_dmach_to_queue() We can merge the content of the later so we will have only one function to be used for mapping channels to given eventq Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-27dmaengine: edma: Correct PaRAM access function names (_parm_ to _param_)Peter Ujfalusi
These inline functions are designed to modify parts of the PaRAM in eDMA. Change the names accordingly. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-27dmaengine: edma: Simplify function parameter list for channel operationsPeter Ujfalusi
Instead of passing a pointer to struct edma_cc and the channel number, pass only the pointer to the edma_chan structure for the given channel. This struct contains all the information needed by the functions and the use of this makes it obvious that most of the sanity checks can be removed from the driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-27dmaengine: edma: Optimize memcpy operationPeter Ujfalusi
If the transfer is shorted then 64K we can complete it with one ACNT burst by configuring ACNT to the length of the copy, this require one paRAM slot. Otherwise we use two paRAM slots for the copy: slot1: will copy (length / 32767) number of 32767 byte long blocks slot2: will be configured to copy the remaining data. According to tests this patch increases the throughput of memcpy from ~3MB/s to 15MB/s Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-27dmaengine: edma: Remove alignment constraint for memcpyPeter Ujfalusi
Despite the claim by the original commit adding the memcpy support, eDMA does not have constraint on the alignment of src, dst or length in increment mode. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-14dmaengine: edma: Dynamic paRAM slot handling if HW supports itPeter Ujfalusi
If the eDMA3 has support for channel paRAM slot mapping we can utilize it to allocate slots on demand and save precious slots for real transfers. On am335x the eDMA has 64 channels which means we can unlock 64 paRAM slots out from the available 256. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-14dmaengine: edma: Rename bitfields for slot and channel usage trackingPeter Ujfalusi
The names chosen for the bitfields were quite confusing and given no real information on what they are used for... edma_inuse -> slot_inuse: tracks the slot usage/availability edma_unused -> channel_unused: tracks the channel usage/availability Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-14dmaengine: edma: Read channel mapping support only once from HWPeter Ujfalusi
Instead of directly reading it from CCCFG register take the information out once when we set up the configuration from the HW. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>