summaryrefslogtreecommitdiff
path: root/drivers/dma/fsl-edma.c
AgeCommit message (Collapse)Author
2019-12-18dmaengine: fsl-edma: Add eDMA support for QorIQ LS1028A platformPeng Ma
Our platforms(such as LS1021A, LS1012A, LS1043A, LS1046A, LS1028A) with below registers(CHCFG0 - CHCFG15) of eDMA as follows: *-----------------------------------------------------------* | Offset | OTHERS | LS1028A | |--------------|--------------------|-----------------------| | 0x0 | CHCFG0 | CHCFG3 | |--------------|--------------------|-----------------------| | 0x1 | CHCFG1 | CHCFG2 | |--------------|--------------------|-----------------------| | 0x2 | CHCFG2 | CHCFG1 | |--------------|--------------------|-----------------------| | 0x3 | CHCFG3 | CHCFG0 | |--------------|--------------------|-----------------------| | ... | ...... | ...... | |--------------|--------------------|-----------------------| | 0xC | CHCFG12 | CHCFG15 | |--------------|--------------------|-----------------------| | 0xD | CHCFG13 | CHCFG14 | |--------------|--------------------|-----------------------| | 0xE | CHCFG14 | CHCFG13 | |--------------|--------------------|-----------------------| | 0xF | CHCFG15 | CHCFG12 | *-----------------------------------------------------------* This patch is to improve edma driver to fit LS1028A platform. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/20191212033714.4090-1-peng.ma@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-08dmaengine: fsl-edma: implement .device_synchronize callbackAndrey Smirnov
Implement .device_synchronize callback in order to be able to use dmaengine_terminate_sync() and other primitives relying on said callback. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Chris Healy <cphealy@gmail.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: linux-imx@nxp.com Cc: dmaengine@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20190731173659.14778-1-andrew.smirnov@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-08dmaengine: fsl-edma: add i.mx7ulp edma2 version supportRobin Gong
Add edma2 for i.mx7ulp by version v3, since v2 has already been used by mcf-edma. The big changes based on v1 are belows: 1. only one dmamux. 2. another clock dma_clk except dmamux clk. 3. 16 independent interrupts instead of only one interrupt for all channels. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/1563952834-7731-1-git-send-email-yibin.gong@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-31dmaengine: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: dmaengine@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-11-swboyd@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-17Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: - Add support in dmaengine core to do device node checks for DT devices and update bunch of drivers to use that and remove open coding from drivers - New driver/driver support for new hardware, namely: - MediaTek UART APDMA - Freescale i.mx7ulp edma2 - Synopsys eDMA IP core version 0 - Allwinner H6 DMA - Updates to axi-dma and support for interleaved cyclic transfers - Greg's debugfs return value check removals on drivers - Updates to stm32-dma, hsu, dw, pl330, tegra drivers * tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support" dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback Documentation: dmaengine: clean up description of dmatest usage dmaengine: tegra210-adma: remove PM_CLK dependency dmaengine: fsl-edma: add i.mx7ulp edma2 version support dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma-common: version check for v2 instead dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver" dmaengine: rcar-dmac: Reject zero-length slave DMA requests dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw-edma: fix semicolon.cocci warnings dmaengine: sh: usb-dmac: Use [] to denote a flexible array member dmaengine: dmatest: timeout value of -1 should specify infinite wait dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit dmaengine: fsl-edma: support little endian for edma driver dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width" dmagengine: pl330: add code to get reset property dt-bindings: pl330: document the optional resets property ...
2019-07-08dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"Vinod Koul
This reverts commit 7144afd025b2 ("dmaengine: fsl-edma: add i.mx7ulp edma2 version support") as this fails to build with module option due to usage of of_irq_count() which is not an exported symbol as kernel drivers are *not* expected to use it (rightly so). Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-03dmaengine: fsl-edma: add i.mx7ulp edma2 version supportRobin Gong
Add edma2 for i.mx7ulp by version v3, since v2 has already been used by mcf-edma. The big changes based on v1 are belows: 1. only one dmamux. 2. another clock dma_clk except dmamux clk. 3. 16 independent interrupts instead of only one interrupt for all channels. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Tested-by: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-03dmaengine: fsl-edma: add drvdata for fsl-edmaRobin Gong
There are some differences between vf610 and next i.mx7ulp. Put such differences into static driver data for distinguishing easily at driver level. Change mcf-edma accordingly. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Tested-by: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-04dmaengine: fsl-edma: Adjust indentationKrzysztof Kozlowski
Fix indentation and remove unneeded space after 'return' keyword. This fixes checkpatch warning: WARNING: Statements should start on a tabstop Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-02-04dmaengine: fsl-edma: dma map slave device addressLaurentiu Tudor
This mapping needs to be created in order for slave dma transfers to work on systems with SMMU. The implementation mostly mimics the one in pl330 dma driver, authored by Robin Murphy. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Suggested-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-11dmaengine: fsl-edma: add edma version and configurable registersAngelo Dureghello
This patch adds configurable registers (using __iomem addresses) to allow the use of fsl-edma-common code with slightly different edma module versions, as Vybrid (v1) and ColdFire (v2) are. Signed-off-by: Angelo Dureghello <angelo@sysam.it> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-11dmaengine: fsl-edma: extract common fsl-edma code (no changes in behavior ↵Angelo Dureghello
intended) This patch adds a new fsl-edma-common module to allow new mcf-edma module code to use most of the fsl-edma code. Signed-off-by: Angelo Dureghello <angelo@sysam.it> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2017-12-15dmaengine: fsl-edma: disable clks on all error pathsAndreas Platschek
Previously enabled clks are only disabled if clk_prepare_enable() fails. However, there are other error paths were the previously enabled clocks are not disabled. To fix the problem, fsl_disable_clocks() now takes the number of clocks that shall be disabled + unprepared. For existing calls were all clocks were already successfully prepared + enabled, DMAMUX_NR is passed to disable + unprepare all clocks. In error paths were only some clocks were successfully prepared + enabled the loop counter is passed, in order to disable + unprepare all successfully prepared + enabled clocks. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Andreas Platschek <andreas.platschek@opentech.at> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-16dmaengine: fsl-edma: kill the tasklets upon exitVinod Koul
drivers should ensure that tasklets are killed, so that they can't be executed after driver remove is executed, so ensure they are killed. This driver used vchan tasklets, so those need to be killed. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Cc: Jingchang Lu <b35083@freescale.com> Cc: Peter Griffin <peter.griffin@linaro.org>
2016-07-16dmaengine: fsl-edma: explicitly freeup irqVinod Koul
dmaengine device should explicitly call devm_free_irq() when using devm_request_irq(). The irq is still ON when devices remove is executed and irq should be quiesced before remove is completed. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Cc: Jingchang Lu <b35083@freescale.com> Cc: Peter Griffin <peter.griffin@linaro.org>
2016-06-21dmaengine: fsl-edma: print error code in error messages.Peter Griffin
It is useful to print the error code as part of the error message. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-21dmaengine: fsl-edma: Fix clock handling error pathsPeter Griffin
Currently fsl-edma doesn't clk_disable_unprepare() its clocks on error conditions. This patch adds a fsl_disable_clocks helper for this, and also only disables clocks which were enabled if encountering an error whilst enabling clocks. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-05dmaengine: fsl-edma: add PM suspend/resume supportYuan Yao
This add power management suspend/resume support for the fsl-edma driver. eDMA acted as a basic function used by others. What it needs to do is the two steps below to support power management. In fsl_edma_suspend_late: Check whether the DMA chan is idle, if it is not idle disable DMA request. In fsl_edma_resume_early: Enable the eDMA and wait for being used. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-25dmaengine: fsl-edma: clear pending interrupts on initializationStefan Agner
Clear pending interrupts before requesting interrupts and move interrupt initialization after channels have been initialized. This avoids a NULL pointer dereference panic when using kexec while DMA requests were running. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: fsl-edma: Declare slave capabilities for the generic codeMaxime Ripard
Now that the generic slave caps code can make use of the device assigned capabilities, instead of relying on a callback to be implemented. Make use of this code. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: fsl-edma: Split device_controlMaxime Ripard
Split the device_control callback of the Freescale EDMA driver to make use of the newly introduced callbacks, that will eventually be used to retrieve slave capabilities. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: Make the destination abbreviation coherentMaxime Ripard
The dmaengine header abbreviates destination as at least two different strings. Make a coherent use of a single one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-09dmaengine: fsl-edma: fixup reg offset and hw S/G support in big-endian modelJingchang Lu
The offset of all 8-/16-bit registers in big-endian eDMA model are swapped in a 32-bit size opposite those in the little-endian model. The hardware Scatter/Gather requires the subsequent TCDs stored in memory in little endian independent of the register endian model, the eDMA engine will do the swap if need. This patch also use regular assignment for tcd variables r/w instead of with io function previously that may not always be true. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-08dmaengine: fsl-edma: fix calculation of remaining bytesStefan Agner
If the current transfer control descriptor (TCD) was not yet started, the address will be the same as the initial address. Hence test if the current address is less than or equal to the start address of each TCD. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-20dma: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-08-04dmaengine: Remove the context argument to the prep_dma_cyclic operationLaurent Pinchart
The argument is always set to NULL and never used. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-25dmaengine: fsl-edma: fix dmamux index calculating errorJingchang Lu
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Tested-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-16dma: fix eDMA driver as a subsys_initcallYuan Yao
Because of some driver base on DMA, changed the initcall order as subsys_initcall. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-03-06dma: fsl-edma: fix static checker warning of NULL dereferenceJingchang Lu
The static checker reports following warning: drivers/dma/fsl-edma.c:732 fsl_edma_xlate() error: we previously assumed 'chan' could be null (see line 737) The changes of the loop cursor in the iteration may result in NULL dereference when dma_get_slave_channel failed but loop will continue. So use list_for_each_entry_safe() instead of list_for_each_entry() to against this. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-02-18dma: Add Freescale eDMA engine driver supportJingchang Lu
Add Freescale enhanced direct memory(eDMA) controller support. This module can be found on Vybrid and LS-1 SoCs. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Jingchang Lu <b35083@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>