summaryrefslogtreecommitdiff
path: root/drivers/dma/sh
AgeCommit message (Collapse)Author
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-25dmaengine: rcar-dmac: initialize all data before registering IRQ handlerKuninori Morimoto
Anton Volkov noticed that engine->dev is NULL before of_dma_controller_register() in probe. Thus there might be a NULL pointer dereference in rcar_dmac_chan_start_xfer while accessing chan->chan.device->dev which is equal to (&dmac->engine)->dev. On same reason, same and similar things will happen if we didn't initialize all necessary data before calling register irq function. To be more safety code, this patch initialize all necessary data before calling register irq function. Reported-by: Anton Volkov <avolkov@ispras.ru> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-07-08Merge tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: - removal of AVR32 support in dw driver as AVR32 is gone - new driver for Broadcom stream buffer accelerator (SBA) RAID driver - add support for Faraday Technology FTDMAC020 in amba-pl08x driver - IOMMU support in pl330 driver - updates to bunch of drivers * tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: qcom_hidma: correct API violation for submit dmaengine: zynqmp_dma: Remove max len check in zynqmp_dma_prep_memcpy dmaengine: tegra-apb: Really fix runtime-pm usage dmaengine: fsl_raid: make of_device_ids const. dmaengine: qcom_hidma: allow ACPI/DT parameters to be overridden dmaengine: fsldma: set BWC, DAHTS and SAHTS values correctly dmaengine: Kconfig: Simplify the help text for MXS_DMA dmaengine: pl330: Delete unused functions dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once() dmaengine: Kconfig: Extend the dependency for MXS_DMA dmaengine: mxs: Use %zu for printing a size_t variable dmaengine: ste_dma40: Cleanup scatterlist layering violations dmaengine: imx-dma: cleanup scatterlist layering violations dmaengine: use proper name for the R-Car SoC dmaengine: imx-sdma: Fix compilation warning. dmaengine: imx-sdma: Handle return value of clk_prepare_enable dmaengine: pl330: Add IOMMU support to slave tranfers dmaengine: DW DMAC: Handle return value of clk_prepare_enable dmaengine: pl08x: use GENMASK() to create bitmasks dmaengine: pl08x: Add support for Faraday Technology FTDMAC020 ...
2017-05-30rcar-dmac: fixup descriptor pointer for descriptor modeKuninori Morimoto
In descriptor mode, the descriptor running pointer is not maintained by the interrupt handler, thus, driver finds the running descriptor from the descriptor pointer field in the CHCRB register. But, CHCRB::DPTR indicates *next* descriptor pointer, not current. Thus, The residue calculation will be missed. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-19dmaengine: rcar-dmac: wait for ISR to finish before freeing resourcesNiklas Söderlund
This fixes a race condition where the channel resources could be freed before the ISR had finished running resulting in a NULL pointer reference from the ISR. [ 167.148934] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 167.157051] pgd = ffff80003c641000 [ 167.160449] [00000000] *pgd=000000007c507003, *pud=000000007c4ff003, *pmd=0000000000000000 [ 167.168719] Internal error: Oops: 96000046 [#1] PREEMPT SMP [ 167.174289] Modules linked in: [ 167.177348] CPU: 3 PID: 10547 Comm: dma_ioctl Not tainted 4.11.0-rc1-00001-g8d92afddc2f6633a #73 [ 167.186131] Hardware name: Renesas Salvator-X board based on r8a7795 (DT) [ 167.192917] task: ffff80003a411a00 task.stack: ffff80003bcd4000 [ 167.198850] PC is at rcar_dmac_chan_prep_sg+0xe0/0x400 [ 167.203985] LR is at rcar_dmac_chan_prep_sg+0x48/0x400 Based of previous work by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-19dmaengine: rcar-dmac: implement device_synchronize()Niklas Söderlund
Implement the device_synchronize() callback which wait until a dma channel is stopped to provide a synchronization point. This protects the driver from multiple race conditions when terminating and freeing resources. E.g. the completion callback still running after device_terminate_all() has completed. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-19dmaengine: rcar-dmac: store channel IRQ in struct rcar_dmac_chanNiklas Söderlund
The IRQ number is needed after probe to be able to add synchronisation points in other places in the driver when freeing resources and to implement a device_synchronize() callback. Store the IRQ number in the struct rcar_dmac_chan so that it can be used later. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-16dmaengine: usb-dmac: Fix DMAOR AE bit definitionHiroyuki Yokoyama
This patch fixes the register definition of AE (Address Error flag) bit. Fixes: 0c1c8ff32fa2 ("dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver") Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> [Shimoda: add Fixes and Cc tags in the commit log] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-27dmaengine: rcar-dmac: enable descriptor mode on 40bitKuninori Morimoto
SYS-DMAC can use 40bit address transfer, and it supports Descriptor Mode too. Current SYS-DMAC driver disables Descriptor Mode if it was 40bit address today. But it can use Descriptor Mode with 40bit if transfer Source/Destination address are located in same 4GiB region in the 40 bit address space. This patch enables it if all condition was clear Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-02-21Merge tag 'dmaengine-4.11-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This time we fairly boring and bit small update. - Support for Intel iDMA 32-bit hardware - deprecate broken support for channel switching in async_tx - bunch of updates on stm32-dma - Cyclic support for zx dma and making in generic zx dma driver - Small updates to bunch of other drivers" * tag 'dmaengine-4.11-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits) async_tx: deprecate broken support for channel switching dmaengine: rcar-dmac: Widen DMA mask to 40 bits dmaengine: sun6i: allow build on ARM64 platforms (sun50i) dmaengine: Provide a wrapper for memcpy operations dmaengine: zx: fix build warning dmaengine: dw: we do support Merrifield SoC in PCI mode dmaengine: dw: add support of iDMA 32-bit hardware dmaengine: dw: introduce register mappings for iDMA 32-bit dmaengine: dw: introduce block2bytes() and bytes2block() dmaengine: dw: extract dwc_chan_pause() for future use dmaengine: dw: replace convert_burst() with one liner dmaengine: dw: register IRQ and DMA pool with instance ID dmaengine: dw: Fix data corruption in large device to memory transfers dmaengine: ste_dma40: indicate granularity on channels dmaengine: ste_dma40: indicate directions on channels dmaengine: stm32-dma: Add error messages if xlate fails dmaengine: dw: pci: remove LPE Audio DMA ID dmaengine: stm32-dma: Add max_burst support dmaengine: stm32-dma: Add synchronization support dmaengine: stm32-dma: Fix residue computation issue in cyclic mode ...
2017-02-14dmaengine: rcar-dmac: Widen DMA mask to 40 bitsGeert Uytterhoeven
By default, the DMA mask covers only the low 32-bit address space, which causes SWIOTLB on arm64 to fall back to a bounce buffer for DMA transfers involving memory outside the 32-bit address space. The R-Car DMA controller hardware supports a 40-bit address space, hence widen the DMA mask to 40 bits to actually make use of this feature. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-13dmaengine: rcar-dmac: unmap slave resource when channel is freedNiklas Söderlund
The slave mapping should be removed together with other channel resources when the channel is freed. If it's not unmapped it will hang around forever after the channel is freed. Fixes: 9f878603dbdb7db3 ("dmaengine: rcar-dmac: add iommu support for slave transfers") Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-12-12dmaengine: usb-dmac: remove unused ‘uchan’Vinod Koul
In usb_dmac_of_xlate(), variable ‘uchan’ is initialized but never used, which leads to warning with W=1 drivers/dma/sh/usb-dmac.c: In function ‘usb_dmac_of_xlate’: drivers/dma/sh/usb-dmac.c:655:24: warning: variable ‘uchan’ set but not used [-Wunused-but-set-variable] struct usb_dmac_chan *uchan; So remove it. Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-06Merge tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This is bit large pile of code which bring in some nice additions: - Error reporting: we have added a new mechanism for users of dmaenegine to register a callback_result which tells them the result of the dma transaction. Right now only one user (ntb) is using it. - As we discussed on KS mailing list and pointed out NO_IRQ has no place in kernel, this also remove NO_IRQ from dmaengine subsystem (both arm and ppc users) - Support for IOMMU slave transfers and its implementation for arm. - To get better build coverage, enable COMPILE_TEST for bunch of driver, and fix the warning and sparse complaints on these. - Apart from above, usual updates spread across drivers" * tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (169 commits) async_pq_val: fix DMA memory leak dmaengine: virt-dma: move function declarations dmaengine: omap-dma: Enable burst and data pack for SG DT: dmaengine: rcar-dmac: document R8A7743/5 support dmaengine: fsldma: Unmap region obtained by of_iomap dmaengine: jz4780: fix resource leaks on error exit return dma-debug: fix ia64 build, use PHYS_PFN dmaengine: coh901318: fix integer overflow when shifting more than 32 places dmaengine: edma: avoid uninitialized variable use dma-mapping: fix m32r build warning dma-mapping: fix ia64 build, use PHYS_PFN dmaengine: ti-dma-crossbar: enable COMPILE_TEST dmaengine: omap-dma: enable COMPILE_TEST dmaengine: edma: enable COMPILE_TEST dmaengine: ti-dma-crossbar: Fix of_device_id data parameter usage dmaengine: ti-dma-crossbar: Correct type for of_find_property() third parameter dmaengine/ARM: omap-dma: Fix the DMAengine compile test on non OMAP configs dmaengine: edma: Rename set_bits and remove unused clear_bits helper dmaengine: edma: Use correct type for of_find_property() third parameter dmaengine: edma: Fix of_device_id data parameter usage (legacy vs TPCC) ...
2016-10-03Merge branch 'topic/iommu' into for-linusVinod Koul
2016-09-26dmaengine: rcar-dmac: add iommu support for slave transfersNiklas Söderlund
Enable slave transfers to a device behind a IPMMU by mapping the slave addresses using the dma-mapping API. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26dmaengine: rcar-dmac: group slave configurationNiklas Söderlund
Group slave address and transfer size in own structs for source and destination. This is in preparation for hooking up the dma-mapping API to the slave addresses. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-08dmaengine: usb-dmac: check CHCR.DE bit in usb_dmac_isr_channel()Yoshihiro Shimoda
The USB-DMAC's interruption happens even if the CHCR.DE is not set to 1 because CHCR.NULLE is set to 1. So, this driver should call usb_dmac_isr_transfer_end() if the DE bit is set to 1 only. Otherwise, the desc is possible to be NULL in the usb_dmac_isr_transfer_end(). Fixes: 0c1c8ff32fa2 ("dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver) Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-08dmaengine: sh_shdma-base: convert callback to helper functionDave Jiang
This is in preperation of moving to a callback that provides results to the callback for the transaction. The conversion will maintain current behavior and the driver must convert to new callback mechanism at a later time in order to receive results. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-08dmaengine: sh_rcar-dmac: convert callback to helper functionDave Jiang
This is in preperation of moving to a callback that provides results to the callback for the transaction. The conversion will maintain current behavior and the driver must convert to new callback mechanism at a later time in order to receive results. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-16Merge branch 'topic/sh' into for-linusVinod Koul
2016-07-08dmaengine: rcar-dmac: Fix residue reporting for pending descriptorsLaurent Pinchart
Cookies corresponding to pending transfers have a residue value equal to the full size of the corresponding descriptor. The driver miscomputes that and uses the size of the active descriptor instead. Fix it. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [geert: Also check desc.active list] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-08dmaengine: rcar-dmac: Fixed active descriptor initializingMuhammad Hamza Farooq
Running descriptor pointer is set to NULL upon freeing resources. Other- wise, rcar_dmac_issue_pending might not start new transfers Signed-off-by: Muhammad Hamza Farooq <mfarooq@visteon.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-08dmaengine: rcar-dmac: warn if transfer cannot start as TE = 1Niklas Söderlund
The documentation states one should make sure both DE and TE are cleared before starting a transaction. This patch extends the current warning to look at both DE and TE. Based on previous work from Muhammad Hamza Farooq. Suggested-by: Muhammad Hamza Farooq <mfarooq@visteon.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-08dmaengine: rcar-dmac: use result of updated get_residue in tx_statusMuhammad Hamza Farooq
The hardware might have complete the transfer but the interrupt handler might not have had a chance to run. If rcar_dmac_chan_get_residue() which reads HW registers finds that there is no residue return DMA_COMPLETE. Signed-off-by: Muhammad Hamza Farooq <mfarooq@visteon.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [Niklas: add explanation in commit message] Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-21dmaengine: Remove site specific OOM error messages on kzallocPeter Griffin
If kzalloc() fails it will issue it's own error message including a dump_stack(). So remove the site specific error messages. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-30dmaengine: rcar-dmac: use list_add() on rcar_dmac_desc_put()Kuninori Morimoto
For each descriptor, in addition to the memory used by the descriptors structure itself, the driver allocates a list of chunks as well as a buffer for hardware descriptors. Descriptors themselves are preallocated, and allocation of the chunks and buffer is performed the first time the descriptor is used. The memory isn't freed when the transfer is completed, as the chunks and buffer will be needed again when the descriptor is reused internally, so the driver keeps the memory around. If only a few descriptors are used concurrently, the current list_add_tail() implementation will result in all preallocated descriptors being used before going back to the first one, and will thus allocate chunks and a buffer for all preallocated descriptors. Using list_add() will put the complete descriptor at the head of the list of available descriptors, so the next transfer will be more likely to reuse a descriptor that already has associated memory instead of one that has never been used before. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-03-03dmaengine: rcar-dmac: clear pertinence number of channelsKuninori Morimoto
DMACHCLR clears each channels, but its channel number is based on its SoC or IP. Current driver is using fixed 0x7fff (= for 15ch), it is not good match for Gen3 or Gen2 Audio DMAC. This patch fixes it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-03-03dmaengine: sh: shdmac: don't open code of_device_get_match_data()Wolfram Sang
This change will also make Coverity happy by avoiding a theoretical NULL pointer dereference; yet another reason is to use the above helper function to tighten the code and make it more readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-02-08dmaengine: sh: Use ARCH_RENESASSimon Horman
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-01-13Merge tag 'dmaengine-4.5-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This round we have few new features, new driver and updates to few drivers. The new features to dmaengine core are: - Synchronized transfer termination API to terminate the dmaengine transfers in synchronized and async fashion as required by users. We have its user now in ALSA dmaengine lib, img, at_xdma, axi_dmac drivers. - Universal API for channel request and start consolidation of request flows. It's user is ompa-dma driver. - Introduce reuse of descriptors and use in pxa_dma driver Add/Remove: - New STM32 DMA driver - Removal of unused R-Car HPB-DMAC driver Updates: - ti-dma-crossbar updates for supporting eDMA - tegra-apb pm updates - idma64 - mv_xor updates - ste_dma updates" * tag 'dmaengine-4.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (54 commits) dmaengine: mv_xor: add suspend/resume support dmaengine: mv_xor: de-duplicate mv_chan_set_mode*() dmaengine: mv_xor: remove mv_xor_chan->current_type field dmaengine: omap-dma: Add support for DMA filter mapping to slave devices dmaengine: edma: Add support for DMA filter mapping to slave devices dmaengine: core: Introduce new, universal API to request a channel dmaengine: core: Move and merge the code paths using private_candidate dmaengine: core: Skip mask matching when it is not provided to private_candidate dmaengine: mdc: Correct terminate_all handling dmaengine: edma: Add probe callback to edma_tptc_driver dmaengine: dw: fix potential memory leak in dw_dma_parse_dt() dmaengine: stm32-dma: Fix unchecked deference of chan->desc dmaengine: sh: Remove unused R-Car HPB-DMAC driver dmaengine: usb-dmac: Document SoC specific compatibility strings ste_dma40: Delete an unnecessary variable initialisation in d40_probe() ste_dma40: Delete another unnecessary check in d40_probe() ste_dma40: Delete an unnecessary check before the function call "kmem_cache_destroy" dmaengine: tegra-apb: Free interrupts before killing tasklets dmaengine: tegra-apb: Update driver to use GFP_NOWAIT dmaengine: tegra-apb: Only save channel state for those in use ...
2016-01-06Merge branch 'topic/rcar' into for-linusVinod Koul
2015-12-10dmaengine: sh: Remove unused R-Car HPB-DMAC driverGeert Uytterhoeven
As of commit 4baadb9e05c68962 ("ARM: shmobile: r8a7778: remove obsolete setup code"), the Renesas R-Car HPB-DMAC driver is no longer used. In theory it could still be used on R-Car Gen1 SoCs, but that requires adding DT support to the driver, which is not planned. Remove the driver, it can be resurrected from git history when needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-05dmaengine: usb-dmac: fix endless loop in usb_dmac_chan_terminate_all()Yoshihiro Shimoda
This patch fixes an issue that list_for_each_entry() in usb_dmac_chan_terminate_all() is possible to cause endless loop because this will move own desc to the desc_freed. So, this driver should use list_for_each_entry_safe() instead of list_for_each_entry(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-11-16dmaengine: sh: usb-dmac: Fix pm_runtime_{enable,disable}() imbalanceGeert Uytterhoeven
If the call to pm_runtime_get_sync() failed, Runtime PM was left enabled. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-11-16dmaengine: sh: usb-dmac: Fix crash on runtime suspendGeert Uytterhoeven
If CONFIG_PREEMPT=y: Unable to handle kernel NULL pointer dereference at virtual address 00000014 pgd = c0003000 [00000014] *pgd=80000040004003, *pmd=00000000 Internal error: Oops: 206 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 17 Comm: kworker/0:1 Tainted: G W 4.3.0-rc3-koelsch-022 71-g705498fc5e6a5da8-dirty #1789 Hardware name: Generic R8A7791 (Flattened Device Tree) Workqueue: pm pm_runtime_work task: ef578e40 ti: ef57a000 task.ti: ef57a000 PC is at usb_dmac_chan_halt+0xc/0xc0 LR is at usb_dmac_runtime_suspend+0x28/0x38 pc : [<c023c880>] lr : [<c023c95c>] psr: 80000113 sp : ef57bdf8 ip : 00000008 fp : 00000003 r10: 00000008 r9 : c06ab928 r8 : ef49e810 r7 : 00000000 r6 : 000000ac r5 : ef770010 r4 : 00000000 r3 : 00000000 r2 : 8ffc2b84 r1 : 00000000 r0 : ef770010 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 30c5307d Table: 40003000 DAC: fffffffd Process kworker/0:1 (pid: 17, stack limit = 0xef57a210) Stack: (0xef57bdf8 to 0xef57c000) [... [<c023c880>] (usb_dmac_chan_halt) from [<c023c95c>] (usb_dmac_runtime_suspend+0x28/0x38) [<c023c95c>] (usb_dmac_runtime_suspend) from [<c027b25c>] (pm_genpd_runtime_suspend+0x74/0x23c) This happens because usb_dmac_probe() calls pm_runtime_put() before usb_dmac_chan_probe(), leading to the device being suspended before the DMA channels are initialized, causing a NULL pointer dereference. Move the call to pm_runtime_put() to the end of usb_dmac_probe() to fix this. Add a check to usb_dmac_runtime_suspend() to prevent the crash from happening in the error path. Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-26dmaengine: sort the sh MakefileVinod Koul
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-26dmaengine: sort the sh KconfigVinod Koul
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-29Merge tag 'dmaengine-4.2-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This time we have support for few new devices, few new features and odd fixes spread thru the subsystem. New devices added: - support for CSRatlas7 dma controller - Allwinner H3(sun8i) controller - TI DMA crossbar driver on DRA7x - new pxa driver New features added: - memset support is bought back now that we have a user in xdmac controller - interleaved transfers support different source and destination strides - supporting DMA routers and configuration thru DT - support for reusing descriptors - xdmac memset and interleaved transfer support - hdmac support for interleaved transfers - omap-dma support for memcpy Others: - Constify platform_device_id - mv_xor fixes and improvements" * tag 'dmaengine-4.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits) dmaengine: xgene: fix file permission dmaengine: fsl-edma: clear pending interrupts on initialization dmaengine: xdmac: Add memset support Documentation: dmaengine: document DMA_CTRL_ACK dmaengine: virt-dma: don't always free descriptor upon completion dmaengine: Revert "drivers/dma: remove unused support for MEMSET operations" dmaengine: hdmac: Implement interleaved transfers dmaengine: Move icg helpers to global header dmaengine: mv_xor: improve descriptors list handling and reduce locking dmaengine: mv_xor: Enlarge descriptor pool size dmaengine: mv_xor: add support for a38x command in descriptor mode dmaengine: mv_xor: Rename function for consistent naming dmaengine: mv_xor: bug fix for racing condition in descriptors cleanup dmaengine: pl330: fix wording in mcbufsz message dmaengine: sirf: add CSRatlas7 SoC support dmaengine: xgene-dma: Fix "incorrect type in assignement" warnings dmaengine: fix kernel-doc documentation dmaengine: pxa_dma: add support for legacy transition dmaengine: pxa_dma: add debug information dmaengine: pxa: add pxa dmaengine driver ...
2015-06-05Merge remote-tracking branches 'asoc/topic/max98095', 'asoc/topic/omap', ↵Mark Brown
'asoc/topic/pxa', 'asoc/topic/qcom' and 'asoc/topic/rcar' into asoc-next
2015-05-25dmaengine: rcar-dmac: Use DECLARE_BITMAPJoe Perches
Use the generic mechanism to declare a bitmap instead of unsigned long. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-25dmaengine: shdma: r8a73a4: Make dma_ts_shift[] staticGeert Uytterhoeven
dma_ts_shift[] isn't used outside this source file. All other users use the definition from arch/arm/mach-shmobile/dma-register.h. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-22dmaengine: rcar-dmac: fixup spinlock in rcar-dmacKuninori Morimoto
Current rcar-dmac driver is using spin_lock_irq() / spin_unlock_irq() in some functions. But, some other driver might call DMAEngine API during interrupt disabled. In such case, rcar-dmac side spin_unlock_irq() forcefully allows all interrupts. Therefore, other driver receives unexpected interruption, and its exclusive access control will be broken. This patch replaces spin_lock_irq() to spin_lock_irqsave(), and spin_unlock_irq() to spin_unlock_irqrestore(). Reported-by: Cao Minh Hiep <cm-hiep@jinso.co.jp> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-27dmaengine: usb-dmac: Protect PM-only functions to kill warningGeert Uytterhoeven
If CONFIG_PM=n: drivers/dma/sh/usb-dmac.c:677: warning: ‘usb_dmac_runtime_suspend’ defined but not used drivers/dma/sh/usb-dmac.c:688: warning: ‘usb_dmac_runtime_resume’ defined but not used Protect the unused functions by #ifdef CONFIG_PM to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-24Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: - new drivers for: - Ingenic JZ4780 controller - APM X-Gene controller - Freescale RaidEngine device - Renesas USB Controller - remove device_alloc_chan_resources dummy handlers - sh driver cleanups for peri peri and related emmc and asoc patches as well - fixes and enhancements spread over the drivers * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits) dmaengine: dw: don't prompt for DW_DMAC_CORE dmaengine: shdmac: avoid unused variable warnings dmaengine: fix platform_no_drv_owner.cocci warnings dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe() dmaengine: at_xdmac: unlock spin lock before return dmaengine: xgene: devm_ioremap() returns NULL on error dmaengine: xgene: buffer overflow in xgene_dma_init_channels() dmaengine: usb-dmac: Fix dereferencing freed memory 'desc' dmaengine: sa11x0: report slave capabilities to upper layers dmaengine: vdma: Fix compilation warnings dmaengine: fsl_raid: statify fsl_re_chan_probe dmaengine: Driver support for FSL RaidEngine device. dmaengine: xgene_dma_init_ring_mngr() can be static Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes dmaengine: Add support for APM X-Gene SoC DMA engine driver dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver dmaengine: renesas,usb-dmac: Add device tree bindings documentation dmaengine: edma: fixed wrongly initialized data parameter to the edma callback dmaengine: ste_dma40: fix implicit conversion ...
2015-04-21Merge branch 'topic/sh' into for-linusVinod Koul
2015-04-17dmaengine: shdmac: avoid unused variable warningsArnd Bergmann
This driver uses '#ifdef CONFIG_ARCH_SHMOBILE' and '#ifdef CONFIG_ARM' interchangeably in its sh_dmae_probe function, which causes a build warning when building for ARM without also enabling shmobile: dma/sh/shdmac.c: In function sh_dmae_probe: dma/sh/shdmac.c:696:6: warning: unused variable errirq [-Wunused-variable] dma/sh/shdmac.c:695:16: warning: unused variable irqflags [-Wunused-variable] dma/sh/shdmac.c: At top level: dma/sh/shdmac.c:447:20: warning: sh_dmae_err defined but not used [-Wunused-function] This changes all the #ifdef to test for CONFIG_ARCH_SHMOBILE to avoid that warning. An earlier patch from Laurent had fixed the warning for non-ARM case, but it still remained present in ARM randconfig builds. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 52d6a5ee101bf ("DMA: shdma: Fix warnings due to declared but unused symbols") Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-17dmaengine: usb-dmac: Fix dereferencing freed memory 'desc'Yoshihiro Shimoda
This patch fixes an issue that the usb_dmac_desc_free() is dereferencing freed memory 'desc' because it uses list_for_each_entry(). This function should use list_for_each_entry_safe(). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-02dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driverYoshihiro Shimoda
This DMAC is Renesas USB high-speed module DMA controller that supports slave transfer. This USB-DMAC has similar register sets with R-Car Gen2 DMAC, but the USB-DMAC has specific registers to control the USB transactions. If this code is added into the rcar-dmac driver, it will become unreadable. So, this driver is independent from the rcar-dmac. And, this USB-DMAC uses virt-dma infrastructure. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18dmaengine: remove Renesas Audio DMAC peri periKuninori Morimoto
Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. Audio DMAC peri peri on DMAEngine is no longer needed. remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de>