summaryrefslogtreecommitdiff
path: root/drivers/dma/xilinx
AgeCommit message (Collapse)Author
2021-07-14dmaengine: xilinx_dma: Fix read-after-free bug when terminating transfersAdrian Larumbe
When user calls dmaengine_terminate_sync, the driver will clean up any remaining descriptors for all the pending or active transfers that had previously been submitted. However, this might happen whilst the tasklet is invoking the DMA callback for the last finished transfer, so by the time it returns and takes over the channel's spinlock, the list of completed descriptors it was traversing is no longer valid. This leads to a read-after-free situation. Fix it by signalling whether a user-triggered termination has happened by means of a boolean variable. Signed-off-by: Adrian Larumbe <adrian.martinezlarumbe@imgtec.com> Link: https://lore.kernel.org/r/20210706234338.7696-3-adrian.martinezlarumbe@imgtec.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-05Merge tag 'dmaengine-5.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "This time around we have a smaller pull request than usual and this includes code removal, so should be good! New drivers/devices - Support for QCOM SM8250 GPI DMA - removal of shdma-of driver and binding Updates: - arm-pl08x yaml binding move - altera-msgdma gained DT support - removal of imx-sdma platform data support - idxd and xilinx driver updates" * tag 'dmaengine-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (22 commits) dmaengine: imx-sdma: Remove platform data header dmaengine: xilinx: dpdma: Fix spacing around addr[i-1] dmaengine: xilinx: dpdma: Use kernel type u32 over uint32_t dmaengine: altera-msgdma: add OF support MAINTAINERS: add entry for Altera mSGDMA dt-bindings: dma: add schema for altera-msgdma dmaengine: xilinx: dpdma: fix kernel-doc dmaengine: sf-pdma: apply proper spinlock flags in sf_pdma_prep_dma_memcpy() dmaengine: sh: Remove unused shdma-of driver dt-bindings: dmaengine: Remove SHDMA Device Tree bindings dmaengine: qcom: gpi: Add SM8250 compatible dt-bindings: dmaengine: qcom: gpi: add compatible for sm8250 dmaengine: sun4i: Use list_move_tail instead of list_del/list_add_tail dmaengine: ti: omap-dma: Skip pointless cpu_pm context restore on errors dmaengine: hsu: Account transferred bytes dmaengine: Move kdoc description of struct dma_chan_percpu closer to it dmaengine: xilinx: dpdma: Print debug message when losing vsync race dmaengine: xilinx: dpdma: Print channel number in kernel log messages dt-bindings: dma: convert arm-pl08x to yaml dmaengine: idxd: remove devm allocation for idxd->int_handles ...
2021-06-24dmaengine: xilinx: dpdma: Fix spacing around addr[i-1]Michal Simek
Use proper spacing for array calculation. Issue is reported by checkpatch.pl --strict. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/ef7cde6f793bfa6f3dd0a8898bad13b6407479b0.1624446456.git.michal.simek@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-24dmaengine: xilinx: dpdma: Use kernel type u32 over uint32_tMichal Simek
Use u32 kernel type instead of uint32_t. Issue is reported by checkpatch.pl --strict. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/9569008794d519b487348bfeafbfd76c5da5755e.1624446336.git.michal.simek@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-16dmaengine: xilinx: dpdma: fix kernel-docYang Li
Fix function name in xilinx/xilinx_dpdma.c comment to remove a warning found by kernel-doc. drivers/dma/xilinx/xilinx_dpdma.c:935: warning: expecting prototype for xilinx_dpdma_chan_no_ostand(). Prototype was for xilinx_dpdma_chan_notify_no_ostand() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/1623222893-123227-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31dmaengine: xilinx: dpdma: Print debug message when losing vsync raceLaurent Pinchart
The hardware retrigger is inherently racy with the vsync interrupt. This isn't an issue as the hardware provides a way to detect a race loss and handle it correctly. When debugging issues related to this, it's useful to get a notification of the race loss. Add a debug message to do so. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jianqiang Chen <jianqiang.chen@xilinx.com> Reviewed-by: Jianqiang Chen <jianqiang.chen@xilinx.com> Link: https://lore.kernel.org/r/20210520152420.23986-4-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31dmaengine: xilinx: dpdma: Print channel number in kernel log messagesLaurent Pinchart
To ease debugging, add the channel number to all kernel log messages related to a particular channel. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jianqiang Chen <jianqiang.chen@xilinx.com> Reviewed-by: Jianqiang Chen <jianqiang.chen@xilinx.com> Link: https://lore.kernel.org/r/20210520152420.23986-3-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31dmaengine: xilinx: dpdma: Limit descriptor IDs to 16 bitsLaurent Pinchart
While the descriptor ID is stored in a 32-bit field in the hardware descriptor, only 16 bits are used by the hardware and are reported through the XILINX_DPDMA_CH_DESC_ID register. Failure to handle the wrap-around results in a descriptor ID mismatch after 65536 frames. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jianqiang Chen <jianqiang.chen@xilinx.com> Reviewed-by: Jianqiang Chen <jianqiang.chen@xilinx.com> Link: https://lore.kernel.org/r/20210520152420.23986-5-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31dmaengine: zynqmp_dma: Fix PM reference leak in zynqmp_dma_alloc_chan_resourc()Yu Kuai
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20210517081826.1564698-4-yukuai3@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-10dmaengine: xilinx: dpdma: initialize registers before request_irqQuanyang Wang
In some scenarios (kdump), dpdma hardware irqs has been enabled when calling request_irq in probe function, and then the dpdma irq handler xilinx_dpdma_irq_handler is invoked to access xdev->chan[i]. But at this moment xdev->chan[i] hasn't been initialized. We should ensure the dpdma controller to be in a consistent and clean state before further initialization. So add dpdma_hw_init() to do this. Furthermore, in xilinx_dpdma_disable_irq, disable all interrupts instead of error interrupts. This patch is to fix the kdump kernel crash as below: [ 3.696128] Unable to handle kernel NULL pointer dereference at virtual address 000000000000012c [ 3.696710] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed [ 3.704900] Mem abort info: [ 3.704902] ESR = 0x96000005 [ 3.704905] EC = 0x25: DABT (current EL), IL = 32 bits [ 3.704907] SET = 0, FnV = 0 [ 3.704912] EA = 0, S1PTW = 0 [ 3.713800] ahci-ceva fd0c0000.ahci: supply ahci not found, using dummy regulator [ 3.715585] Data abort info: [ 3.715587] ISV = 0, ISS = 0x00000005 [ 3.715589] CM = 0, WnR = 0 [ 3.715592] [000000000000012c] user address but active_mm is swapper [ 3.715596] Internal error: Oops: 96000005 [#1] SMP [ 3.715599] Modules linked in: [ 3.715608] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-12170-g60894882155f-dirty #77 [ 3.723937] Hardware name: ZynqMP ZCU102 Rev1.0 (DT) [ 3.723942] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--) [ 3.723956] pc : xilinx_dpdma_irq_handler+0x418/0x560 [ 3.793049] lr : xilinx_dpdma_irq_handler+0x3d8/0x560 [ 3.798089] sp : ffffffc01186bdf0 [ 3.801388] x29: ffffffc01186bdf0 x28: ffffffc011836f28 [ 3.806692] x27: ffffff8023e0ac80 x26: 0000000000000080 [ 3.811996] x25: 0000000008000408 x24: 0000000000000003 [ 3.817300] x23: ffffffc01186be70 x22: ffffffc011291740 [ 3.822604] x21: 0000000000000000 x20: 0000000008000408 [ 3.827908] x19: 0000000000000000 x18: 0000000000000010 [ 3.833212] x17: 0000000000000000 x16: 0000000000000000 [ 3.838516] x15: 0000000000000000 x14: ffffffc011291740 [ 3.843820] x13: ffffffc02eb4d000 x12: 0000000034d4d91d [ 3.849124] x11: 0000000000000040 x10: ffffffc0112d2d48 [ 3.854428] x9 : ffffffc0112d2d40 x8 : ffffff8021c00268 [ 3.859732] x7 : 0000000000000000 x6 : ffffffc011836000 [ 3.865036] x5 : 0000000000000003 x4 : 0000000000000000 [ 3.870340] x3 : 0000000000000001 x2 : 0000000000000000 [ 3.875644] x1 : 0000000000000000 x0 : 000000000000012c [ 3.880948] Call trace: [ 3.883382] xilinx_dpdma_irq_handler+0x418/0x560 [ 3.888079] __handle_irq_event_percpu+0x5c/0x178 [ 3.892774] handle_irq_event_percpu+0x34/0x98 [ 3.897210] handle_irq_event+0x44/0xb8 [ 3.901030] handle_fasteoi_irq+0xd0/0x190 [ 3.905117] generic_handle_irq+0x30/0x48 [ 3.909111] __handle_domain_irq+0x64/0xc0 [ 3.913192] gic_handle_irq+0x78/0xa0 [ 3.916846] el1_irq+0xc4/0x180 [ 3.919982] cpuidle_enter_state+0x134/0x2f8 [ 3.924243] cpuidle_enter+0x38/0x50 [ 3.927810] call_cpuidle+0x1c/0x40 [ 3.931290] do_idle+0x20c/0x270 [ 3.934502] cpu_startup_entry+0x28/0x58 [ 3.938410] rest_init+0xbc/0xcc [ 3.941631] arch_call_rest_init+0x10/0x1c [ 3.945718] start_kernel+0x51c/0x558 Fixes: 7cbb0c63de3f ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Link: https://lore.kernel.org/r/20210430064041.4058180-1-quanyang.wang@windriver.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-20Merge branch 'fixes' into nextVinod Koul
2021-03-16dmaengine: xilinx: Introduce synchronize() callbackLars-Peter Clausen
The Xilinx dmaengine driver uses a tasklet to process completed descriptors and execute their callbacks. Currently consumers of the DMA channel have to no method of synchronization against this tasklet when using the Xilinx dmaengine drivers. This can lead to race conditions when the consumer frees resources that are accessed in the callback before the tasklet has finished running. It is not enough to just call dmaengine_terminal_all() since on a multi-processor system the tasklet can run concurrently to it and might call the callback after dmaengine_terminate_all() has already finished. To mitigate this issue implement the synchronize() callback for the driver, which will wait until the tasklet has finished. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210313125311.4823-1-lars@metafoo.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-16dmaengine: xilinx: dpdma: Fix race condition in done IRQLaurent Pinchart
The active descriptor pointer is accessed from different contexts, including different interrupt handlers, and its access must be protected by the channel's lock. This wasn't done in the done IRQ handler. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20210307040629.29308-3-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-16dmaengine: xilinx: dpdma: Fix descriptor issuing on video groupLaurent Pinchart
When multiple channels are part of a video group, the transfer is triggered only when all channels in the group are ready. The logic to do so is incorrect, as it causes the descriptors for all channels but the last one in a group to not being pushed to the hardware. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20210307040629.29308-2-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-23Merge tag 'dmaengine-5.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "We have couple of drivers removed a new driver and bunch of new device support and few updates to drivers for this round. New drivers/devices: - Intel LGM SoC DMA driver - Actions Semi S500 DMA controller - Renesas r8a779a0 dma controller - Ingenic JZ4760(B) dma controller - Intel KeemBay AxiDMA controller Removed: - Coh901318 dma driver - Zte zx dma driver - Sirfsoc dma driver Updates: - mmp_pdma, mmp_tdma gained module support - imx-sdma become modern and dropped platform data support - dw-axi driver gained slave and cyclic dma support" * tag 'dmaengine-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (58 commits) dmaengine: dw-axi-dmac: remove redundant null check on desc dmaengine: xilinx_dma: Alloc tx descriptors GFP_NOWAIT dmaengine: dw-axi-dmac: Virtually split the linked-list dmaengine: dw-axi-dmac: Set constraint to the Max segment size dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD registers dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support dmaengine: drivers: Kconfig: add HAS_IOMEM dependency to DW_AXI_DMAC dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA dmaengine: dw-axi-dmac: Support burst residue granularity dmaengine: dw-axi-dmac: Support of_dma_controller_register() dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic() dmaengine: dw-axi-dmac: Support device_prep_slave_sg dmaengine: dw-axi-dmac: Add device_config operation dmaengine: dw-axi-dmac: Add device_synchronize() callback dmaengine: dw-axi-dmac: move dma_pool_create() to alloc_chan_resources() dmaengine: dw-axi-dmac: simplify descriptor management dt-bindings: dma: Add YAML schemas for dw-axi-dmac dmaengine: ti: k3-psil: optimize struct psil_endpoint_config for size ...
2021-02-01dmaengine: xilinx_dma: Alloc tx descriptors GFP_NOWAITRichard Fitzgerald
Use GFP_NOWAIT allocation in xilinx_dma_alloc_tx_descriptor(). This is necessary for compatibility with ALSA, which calls dmaengine_prep_dma_cyclic() from an atomic context. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210129170800.31857-1-rf@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04dmaengine: xilinx_dma: fix mixed_enum_type coverity warningShravya Kumbham
Typecast the fls(width -1) with (enum dmaengine_alignment) in xilinx_dma_chan_probe function to fix the coverity warning. Addresses-Coverity: Event mixed_enum_type. Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support") Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1608722462-29519-4-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04dmaengine: xilinx_dma: fix incompatible param warning in _child_probe()Shravya Kumbham
In xilinx_dma_child_probe function, the nr_channels variable is passed to of_property_read_u32() which expects an u32 return value pointer. Modify the nr_channels variable type from int to u32 to fix the incompatible parameter coverity warning. Addresses-Coverity: Event incompatible_param. Fixes: 1a9e7a03c761 ("dmaengine: vdma: Add support for mulit-channel dma mode") Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1608722462-29519-3-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04dmaengine: xilinx_dma: check dma_async_device_register return valueShravya Kumbham
dma_async_device_register() can return non-zero error code. Add condition to check the return value of dma_async_device_register function and handle the error path. Addresses-Coverity: Event check_return. Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support") Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1608722462-29519-2-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-09dmaengine: xilinx_dma: Fix SG capability check for MCDMAMatthew Murrian
The SG capability is inherently present with Multichannel DMA operation. The register used to check for this capability with other DMA driver types is not defined for MCDMA. Fixes: 6ccd692bfb7f ("dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support") Signed-off-by: Matthew Murrian <matthew.murrian@goctsi.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1604473206-32573-4-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-09dmaengine: xilinx_dma: Fix usage of xilinx_aximcdma_tx_segmentMatthew Murrian
Several code sections incorrectly use struct xilinx_axidma_tx_segment instead of struct xilinx_aximcdma_tx_segment when operating as Multichannel DMA. As their structures are similar, this just works. Fixes: 6ccd692bfb7f ("dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support") Signed-off-by: Matthew Murrian <matthew.murrian@goctsi.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1604473206-32573-3-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-09dmaengine: xilinx_dma: use readl_poll_timeout_atomic variantMarc Ferland
The xilinx_dma_poll_timeout macro is sometimes called while holding a spinlock (see xilinx_dma_issue_pending() for an example) this means we shouldn't sleep when polling the dma channel registers. To address it in xilinx poll timeout macro use readl_poll_timeout_atomic instead of readl_poll_timeout variant. Signed-off-by: Marc Ferland <ferlandm@amotus.ca> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1604473206-32573-2-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-08dmaengine: zynqmp_dma: fix kernel-doc style for taskletVinod Koul
Commit f19a11d40a78 ("dmaengine: xilinx: convert tasklets to use new tasklet_setup() API") updated driver to use new tasklet_setup() API but missed to update the documentation for the tasklet function. Fixes: f19a11d40a78 ("dmaengine: xilinx: convert tasklets to use new tasklet_setup() API") Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20201007083113.567559-5-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-08dmaengine: xilinx_dma: fix kernel-doc style for taskletVinod Koul
Commit f19a11d40a78 ("dmaengine: xilinx: convert tasklets to use new tasklet_setup() API") updated driver to use new tasklet_setup() API but missed to update the documentation for the tasklet function. Fixes: f19a11d40a78 ("dmaengine: xilinx: convert tasklets to use new tasklet_setup() API") Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20201007083113.567559-4-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-07dmaengine: xilinx: dpdma: convert tasklets to use new tasklet_setup() APIAllen Pais
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <apais@linux.microsoft.com> Link: https://lore.kernel.org/r/20201006050458.221329-2-allen.lkml@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18dmaengine: xilinx: convert tasklets to use new tasklet_setup() APIAllen Pais
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Link: https://lore.kernel.org/r/20200831103542.305571-33-allen.lkml@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03dmaengine: xilinx: Simplify with dev_err_probe()Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200828152637.16903-3-krzk@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-19dmaengine: xilinx: dpdma: Make symbol 'dpdma_debugfs_reqs' staticWei Yongjun
The sparse tool complains as follows: drivers/dma/xilinx/xilinx_dpdma.c:349:37: warning: symbol 'dpdma_debugfs_reqs' was not declared. Should it be static? This variable is not used outside of xilinx_dpdma.c, so this commit marks it static. Fixes: 1d220435cab3 ("dmaengine: xilinx: dpdma: Add debugfs support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200818112217.43816-1-weiyongjun1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-17dmaengine: xilinx: dpdma: Add debugfs supportLaurent Pinchart
Expose statistics to debugfs when available. This helps debugging issues with the DPDMA driver. Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200812171228.9751-1-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-22dmaengine: xilinx: dpdma: Fix kerneldoc warningLaurent Pinchart
Document the struct xilinx_dpdma_chan desc field to fix a kerneldoc undocumented member warning (which can be reproduced by compiling with W=1). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200722161747.30048-1-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-22dmaengine: xilinx: dpdma: add missing kernel docVinod Koul
xilinx_dpdma_sw_desc_set_dma_addrs() documentation is missing describing 'xdev', so add it drivers/dma/xilinx/xilinx_dpdma.c:313: warning: Function parameter or member 'xdev' not described in 'xilinx_dpdma_sw_desc_set_dma_addrs' Link: https://lore.kernel.org/r/20200718135201.191881-2-vkoul@kernel.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-22dmaengine: xilinx: dpdma: remove comparison of unsigned expressionVinod Koul
xilinx_dpdma_config() channel id is unsigned int and compares with ZYNQMP_DPDMA_VIDEO0 which is zero, so remove this comparison drivers/dma/xilinx/xilinx_dpdma.c:1073:15: warning: comparison of unsigned expression in ‘>= 0’ is always true [-Wtype-limits] if (chan->id >= ZYNQMP_DPDMA_VIDEO0 && chan->id <= ZYNQMP_DPDMA_VIDEO2) Link: https://lore.kernel.org/r/20200718135201.191881-1-vkoul@kernel.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-17dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driverHyun Kwon
The ZynqMP DisplayPort subsystem includes a DMA engine called DPDMA with 6 DMa channels (4 for display and 2 for audio). This driver exposes the DPDMA through the dmaengine API, to be used by audio (ALSA) and display (DRM) drivers for the DisplayPort subsystem. Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Tejas Upadhyay <tejasu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200717013337.24122-4-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-15dmaengine: zynqmp_dma: Move list_del inside zynqmp_dma_free_descriptor.Rafał Hibner
List elements are not formally removed from list during zynqmp_dma_reset. Signed-off-by: Rafal Hibner <rafal.hibner@secom.com.pl> Link: https://lore.kernel.org/r/20200506102844.2259-1-rafal.hibner@secom.com.pl Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-15dmaengine: xilinx_dma: Add missing check for empty listSebastian von Ohr
The DMA transfer might finish just after checking the state with dma_cookie_status, but before the lock is acquired. Not checking for an empty list in xilinx_dma_tx_status may result in reading random data or data corruption when desc is written to. This can be reliably triggered by using dma_sync_wait to wait for DMA completion. Signed-off-by: Sebastian von Ohr <vonohr@smaract.com> Tested-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/20200303130518.333-1-vonohr@smaract.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25dmaengine: xilinx_dma: In dma channel probe fix node order dependencyRadhey Shyam Pandey
In overlay application we noticed that dma channel node probe order is inverted i.e s2mm channel is probed first followed by mm2s channel. The reason for this inversion is fdtoverlay utility which uses a function called fdt_add_subnode(*). It stores the subnodes after the properties, this has the effect of inserting the new subnode before any others and the end result is a reversal. Because of this inverted channel probe order, the node probed first is assigned a '0' index instead of Channel ID should be '0' for tx and '1' for rx and dmatest client using the DT convention fails in dma transfer as channel are swapped. To fix above behavior and make channel assignment index independent of probe order, always assign mm2s channel at '0' index and the s2mm channel at IP specific fixed offset derived from the max_channels count. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1580388865-9960-3-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25dmaengine: xilinx_dma: Extend dma_config structure to store max channel countRadhey Shyam Pandey
Extend dma_config structure to store the max channel count. This input is used to populate dma device channel nodes at the fixed offset. It serves as a preparatory patch for removing dma channel DT node order dependency, added in the subsequent commit. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1580388865-9960-2-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-24dmaengine: xilinx_dma: Reset DMA channel in dma_terminate_allRadhey Shyam Pandey
Reset DMA channel after stop to ensure that pending transfers and FIFOs in the datapath are flushed or completed. It also cleanup the terminate path and removes stop for the cyclic mode as after the reset stop is not required. This fixes intermittent data verification failure when xilinx dma test the client is stressed and loaded/unloaded multiple times. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1580283909-32678-1-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: zynqmp_dma: fix burst length configurationMatthias Fend
Since the dma engine expects the burst length register content as power of 2 value, the burst length needs to be converted first. Additionally add a burst length range check to avoid corrupting unrelated register bits. Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net> Link: https://lore.kernel.org/r/20200115102249.24398-1-matthias.fend@wolfvision.net Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-14Merge branch 'fixes' into nextVinod Koul
2019-11-06dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver supportRadhey Shyam Pandey
Add support for AXI Multichannel Direct Memory Access (AXI MCDMA) core, which is a soft Xilinx IP core that provides high-bandwidth direct memory access between memory and AXI4-Stream target peripherals. The AXI MCDMA core provides scatter-gather interface with multiple independent transmit and receive channels. The driver supports device_prep_slave_sg slave transfer mode. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571763622-29281-7-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-06dmaengine: xilinx_dma: Extend dma_config struct to store irq routine handleRadhey Shyam Pandey
Extend dma_config structure to store irq routine handle. It enables runtime handler selection based on xdma_ip_type and serves as preparatory patch for adding MCDMA IP support. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Suggested-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/1571763622-29281-6-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-06dmaengine: xilinx_dma: Remove axidma multichannel mode supportRadhey Shyam Pandey
The AXI DMA multichannel support is deprecated in the IP and it is no longer actively supported. For multichannel support, refer to the AXI multichannel direct memory access IP product guide(PG228) and MCDMA driver. So inline with it remove axidma multichannel support from from the driver. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571763622-29281-5-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-20dmaengine: xilinx_dma: Clear desc_pendingcount in xilinx_dma_resetNicholas Graumann
Whenever we reset the channel, we need to clear desc_pendingcount along with desc_submitcount. Otherwise when a new transaction is submitted, the irq coalesce level could be programmed to an incorrect value in the axidma case. This behavior can be observed when terminating pending transactions with xilinx_dma_terminate_all() and then submitting new transactions without releasing and requesting the channel. Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571150904-3988-8-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-20dmaengine: xilinx_dma: Print debug message when no free tx segmentsNicholas Graumann
The driver should not run out of tx segments in normal operation. But, if the user attempts to prepare a transaction with a large sg list, the driver may not have enough free segments to accommodate the request. Log a message at the debug level to inform the user in case they are experiencing issues. Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571150904-3988-7-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-20dmaengine: xilinx_dma: Add callback_result supportNicholas Graumann
Take advantage of dmaengine_desc_get_callback_invoke which allows either a callback or callback_result to be specified. This can be useful when using the AXI DMA transfer unknown quantities of data where the residue contained in the result can be used to calculate the number of bytes transferred. Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571150904-3988-6-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-20dmaengine: xilinx_dma: Introduce xilinx_dma_get_residueNicholas Graumann
Introduce a function that can calculate residues for IPs that support it: AXI DMA and CDMA. Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571150904-3988-5-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-20dmaengine: xilinx_dma: Remove residue from channel dataRadhey Shyam Pandey
There is no use of storing channel data residue field. So clean it up. In tx_status simply pass calculated residue to dma_set_residue. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571150904-3988-4-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-20dmaengine: xilinx_dma: Merge get_callback and _invokeNicholas Graumann
The dma api provides a single interface to get the appropriate callback and invoke it directly. Prefer using it. Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571150904-3988-3-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-20dmaengine: xilinx_dma: Remove desc_callback_valid checkRadhey Shyam Pandey
In descriptor cleanup the call to desc_callback_valid can be safely removed as both callback pointers i.e callback_result and callback are anyway checked in invoke(). There is no much benefit in having redundant checks. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com> Reviewed-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> Link: https://lore.kernel.org/r/1571150904-3988-2-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit (git 2.34.1) at 2025-03-29 09:37:43 +0000