summaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)Author
2017-11-14Merge tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "Updates for this cycle include: - new driver for Spreadtrum dma controller, ST MDMA and DMAMUX controllers - PM support for IMG MDC drivers - updates to bcm-sba-raid driver and improvements to sun6i driver - subsystem conversion for: - timers to use timer_setup() - remove usage of PCI pool API - usage of %p format specifier - minor updates to bunch of drivers" * tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (49 commits) dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type dmaengine: dmatest: warn user when dma test times out dmaengine: Revert "rcar-dmac: use TCRB instead of TCR for residue" dmaengine: stm32_mdma: activate pack/unpack feature dmaengine: at_hdmac: Remove unnecessary 0x prefixes before %pad dmaengine: coh901318: Remove unnecessary 0x prefixes before %pad MAINTAINERS: Step down from a co-maintaner of DW DMAC driver dmaengine: pch_dma: Replace PCI pool old API dmaengine: Convert timers to use timer_setup() dmaengine: sprd: Add Spreadtrum DMA driver dt-bindings: dmaengine: Add Spreadtrum SC9860 DMA controller dmaengine: sun6i: Retrieve channel count/max request from devicetree dmaengine: Build bcm-sba-raid driver as loadable module for iProc SoCs dmaengine: bcm-sba-raid: Use common GPL comment header dmaengine: bcm-sba-raid: Use only single mailbox channel dmaengine: bcm-sba-raid: serialize dma_cookie_complete() using reqs_lock dmaengine: pl330: fix descriptor allocation fail dmaengine: rcar-dmac: use TCRB instead of TCR for residue dmaengine: sun6i: Add support for Allwinner A64 and compatibles arm64: allwinner: a64: Add devicetree binding for DMA controller ...
2017-11-14Merge branch 'topic/xilinx' into for-linusVinod Koul
2017-11-14Merge branch 'topic/timer_api' into for-linusVinod Koul
2017-11-14Merge branch 'topic/ti' into for-linusVinod Koul
2017-11-14Merge branch 'topic/sun' into for-linusVinod Koul
2017-11-14Merge branch 'topic/sprd' into for-linusVinod Koul
Kconfig and Makefile conflicts so put them in right order (sprd ones after stm ones) Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-14Merge branch 'topic/stm' into for-linusVinod Koul
2017-11-14Merge branch 'topic/sa11x0' into for-linusVinod Koul
2017-11-14Merge branch 'topic/renasas' into for-linusVinod Koul
2017-11-14Merge branch 'topic/qcom' into for-linusVinod Koul
2017-11-14Merge branch 'topic/pl330' into for-linusVinod Koul
2017-11-14Merge branch 'topic/imx' into for-linusVinod Koul
2017-11-14Merge branch 'topic/img' into for-linusVinod Koul
2017-11-14Merge branch 'topic/dmatest' into for-linusVinod Koul
2017-11-14Merge branch 'topic/bcom' into for-linusVinod Koul
2017-11-14Merge branch 'topic/axi' into for-linusVinod Koul
2017-11-14Merge branch 'topic/print_fixes' into for-linusVinod Koul
2017-11-08dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value typePeter Ujfalusi
The used 0x1f mask is only valid for am335x family of SoC, different family using this type of crossbar might have different number of electable events. In case of am43xx family 0x3f mask should have been used for example. Instead of trying to handle each family's mask, just use u8 type to store the mux value since the event offsets are aligned to byte offset. Fixes: 42dbdcc6bf965 ("dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-08dmaengine: dmatest: warn user when dma test times outAdam Wallis
Commit adfa543e7314 ("dmatest: don't use set_freezable_with_signal()") introduced a bug (that is in fact documented by the patch commit text) that leaves behind a dangling pointer. Since the done_wait structure is allocated on the stack, future invocations to the DMATEST can produce undesirable results (e.g., corrupted spinlocks). Ideally, this would be cleaned up in the thread handler, but at the very least, the kernel is left in a very precarious scenario that can lead to some long debug sessions when the crash comes later. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197605 Signed-off-by: Adam Wallis <awallis@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-08dmaengine: Revert "rcar-dmac: use TCRB instead of TCR for residue"Vinod Koul
This reverts commit 847449f23dcb: ("dmaengine: rcar-dmac: use TCRB instead of TCR for residue") as it breaks small serial console. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-08dmaengine: stm32_mdma: activate pack/unpack featurePierre-Yves MORDRET
If source and destination bus width differs pack/unpack MDMA feature has to be activated for alignment. This pack/unpack feature implies to have both source/destination address and buffer length aligned on bus width. Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver") Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-08dmaengine: at_hdmac: Remove unnecessary 0x prefixes before %padVinod Koul
Since commit 3cab1e711297 ("lib/vsprintf: refactor duplicate code to special_hex_number()") %pad doesn't need 0x prefix so drop that. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-08dmaengine: coh901318: Remove unnecessary 0x prefixes before %padVinod Koul
Since commit 3cab1e711297 ("lib/vsprintf: refactor duplicate code to special_hex_number()") %pad doesn't need 0x prefix so drop that. Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-31dmaengine: pch_dma: Replace PCI pool old APIRomain Perier
The PCI pool API is deprecated. This commit replaces the PCI pool old API by the appropriate function with the DMA pool API. Signed-off-by: Romain Perier <romain.perier@collabora.com> Acked-by: Peter Senna Tschudin <peter.senna@collabora.com> Tested-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-24dmaengine: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-24dmaengine: sprd: Add Spreadtrum DMA driverBaolin Wang
This patch adds the DMA controller driver for Spreadtrum SC9860 platform. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-23dmaengine: sun6i: Retrieve channel count/max request from devicetreeStefan Brüns
To avoid introduction of a new compatible for each small SoC/DMA controller variation, move the definition of the channel count to the devicetree. The number of vchans is no longer explicit, but limited by the highest port/DMA request number. The result is a slight overallocation for SoCs with a sparse port mapping. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-23dmaengine: Build bcm-sba-raid driver as loadable module for iProc SoCsAnup Patel
By default, we build Broadcom SBA RAID driver as loadable module for iProc SOCs so that kernel image is little smaller and we load SBA RAID driver only when required. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-23dmaengine: bcm-sba-raid: Use common GPL comment headerAnup Patel
This patch makes the comment header of Broadcom SBA RAID driver similar to the GPL comment header used across Broadcom driver sources. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-23dmaengine: bcm-sba-raid: Use only single mailbox channelAnup Patel
Each mailbox channel used by Broadcom SBA RAID driver is a separate HW ring. Currently, Broadcom SBA RAID driver creates one DMA channel using one or more mailbox channels. When we are using more than one mailbox channels for a DMA channel, the sba_request are distributed evenly among multiple mailbox channels which results in sba_request being completed out-of-order. The above described out-of-order completion of sba_request breaks the dma_async_is_complete() API because it assumes DMA cookies are completed in orderly fashion. To ensure correct behaviour of dma_async_is_complete() API, this patch updates Broadcom SBA RAID driver to use only single mailbox channel. If additional mailbox channels are specified in DT then those will be ignored. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-23dmaengine: bcm-sba-raid: serialize dma_cookie_complete() using reqs_lockAnup Patel
As-per documentation in driver/dma/dmaengine.h, the dma_cookie_complete() API should be called with lock held. This patch ensures that Broadcom SBA RAID driver calls the dma_cookie_complete() API with reqs_lock held. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-20dmaengine: altera: Use IRQ-safe spinlock calls in the error paths as wellStefan Roese
The patch edf10919 [dmaengine: altera: fix spinlock usage] missed to change 2 occurrences of spin_unlock_bh() to spin_unlock_irqrestore(). This patch fixes this by moving to the IRQ-safe call in the error paths as well. Fixes: edf10919 (dmaengine: altera: fix spinlock usage) Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Sylvain Lesne <lesne@alse-fr.com> [add fixes tag and fix typo in log] Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-20dmaengine: pl330: fix descriptor allocation failAlexander Kochetkov
If two concurrent threads call pl330_get_desc() when DMAC descriptor pool is empty it is possible that allocation for one of threads will fail with message: kernel: dma-pl330 20078000.dma-controller: pl330_get_desc:2469 ALERT! Here how that can happen. Thread A calls pl330_get_desc() to get descriptor. If DMAC descriptor pool is empty pl330_get_desc() allocates new descriptor on shared pool using add_desc() and then get newly allocated descriptor using pluck_desc(). At the same time thread B calls pluck_desc() and take newly allocated descriptor. In that case descriptor allocation for thread A will fail. Using on-stack pool for new descriptor allow avoid the issue described. The patch modify pl330_get_desc() to use on-stack pool for allocation new descriptors. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-20dmaengine: rcar-dmac: use TCRB instead of TCR for residueHiroyuki Yokoyama
SYS/RT/Audio DMAC includes independent data buffers for reading and writing. Therefore, the read transfer counter and write transfer counter have different values. TCR indicates read counter, and TCRB indicates write counter. The relationship is like below. TCR TCRB [SOURCE] -> [DMAC] -> [SINK] In the MEM_TO_DEV direction, what really matters is how much data has been written to the device. If the DMA is interrupted between read and write, then, the data doesn't end up in the destination, so shouldn't be counted. TCRB is thus the register we should use in this cases. In the DEV_TO_MEM direction, the situation is more complex. Both the read and write side are important. What matters from a data consumer point of view is how much data has been written to memory. On the other hand, if the transfer is interrupted between read and write, we'll end up losing data. It can also be important to report. In the MEM_TO_MEM direction, what matters is of course how much data has been written to memory from data consumer point of view. Here, because read and write have independent data buffers, it will take a while for TCR and TCRB to become equal. Thus we should check TCRB in this case, too. Thus, all cases we should check TCRB instead of TCR. Without this patch, Sound Capture has noise after PluseAudio support (= 07b7acb51d2 ("ASoC: rsnd: update pointer more accurate")), because the recorder will use wrong residue counter which indicates transferred from sound device, but in reality the data was not yet put to memory and recorder will record it. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> [Kuninori: added detail information in log] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-16dmaengine: sun6i: Add support for Allwinner A64 and compatiblesStefan Brüns
The A64 SoC has the same dma engine as the H3 (sun8i), with a reduced amount of physical channels. To allow future reuse of the compatible, leave the channel count etc. in the config data blank and retrieve it from the devicetree. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-16dmaengine: sun6i: Move number of pchans/vchans/request to device structStefan Brüns
Preparatory patch: If the same compatible is used for different SoCs which have a common register layout, but different number of channels, the channel count can no longer be stored in the config. Store it in the device structure instead. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-16dmaengine: sun6i: Enable additional burst lengths/widths on H3Stefan Brüns
The H3 supports bursts lengths of 1, 4, 8 and 16 transfers, each with a width of 1, 2, 4 or 8 bytes. The register value for the the width is log2-encoded, change the conversion function to provide the correct value for width == 8. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-16dmaengine: sun6i: Restructure code to allow extension for new SoCsStefan Brüns
The current code mixes three distinct operations when transforming the slave config to register settings: 1. special handling of DMA_SLAVE_BUSWIDTH_UNDEFINED, maxburst == 0 2. range checking 3. conversion of raw to register values As the range checks depend on the specific SoC, move these out of the conversion to distinct operations. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-16dmaengine: sun6i: Correct burst length field offsets for H3Stefan Brüns
For the H3, the burst lengths field offsets in the channel configuration register differs from earlier SoC generations. Using the A31 register macros actually configured the H3 controller do to bursts of length 1 always, which although working leads to higher bus utilisation. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-16dmaengine: sun6i: Correct setting of clock autogating register for A83T/H3Stefan Brüns
The H83T uses a compatible string different from the A23, but requires the same clock autogating register setting. The H3 also requires setting the clock autogating register, but has the register at a different offset. Add three suitable callbacks for the existing controller generations and set it in the controller config structure. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-16dmaengine: img-mdc: Add runtime PMEd Blake
Add runtime PM support to disable the clock when the h/w is not in use. The existing clock_prepare_enable is removed from probe() as the clock is no longer permanently enabled. Signed-off-by: Ed Blake <ed.blake@sondrel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-16dmaengine: img-mdc: Add suspend / resume handlingEd Blake
Add suspend / resume handling using suspend_late and resume_early, and check that all channels are idle before suspending. DMA drivers should use suspend_late / resume_early to ensure that all DMA client devices are suspended before the DMA device itself, and that client devices are resumed after the DMA device. This avoids suspending the DMA device while transactions are still active. It is the responsibility of client drivers to terminate all DMA transactions in their suspend handlers, so there should be no active transactions by the time suspend_late is called. There's no need to save and restore registers for MDC during suspend / resume, as all transactions will be terminated as a result of the suspend, and all required registers are programmed anyway at the start of any new transactions following resume. Signed-off-by: Ed Blake <ed.blake@sondrel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-12dmaengine: nbpfaxi: Use of_device_get_match_data() helperGeert Uytterhoeven
Use the of_device_get_match_data() helper instead of open coding. Note that when used with DT, there's always a valid match. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-12dmaengine: omap-dma: Implement protection for invalid max_burstPeter Ujfalusi
the device's max_burst to 16777215 (EN is 24bit unsigned value) so clients can take this into consideration when setting up the transfer. During slave transfer preparation check if the requested maxburst is valid. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-12dmaengine: edma: Implement protection for invalid max_burstPeter Ujfalusi
the device's max_burst to 32767 (CIDX is 16bit signed value) so clients can take this into consideration when setting up the transfer. During slave transfer preparation check if the requested maxburst is valid. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-12dmaengine: stm32: remove redundant initialization of hwdescColin Ian King
hwdesc is being initialized to desc->hwdesc but this is never read as hwdesc is overwritten in a for-loop. Remove the redundant initialization and move the declaration of hwdesc into the for-loop. Cleans up clang warning: Value stored to 'hwdesc' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-12dmaengine: stm32_mdma: add CONFIG_OF dependencyArnd Bergmann
Without CONFIG_OF we get a build warning: warning: (STM32_MDMA) selects DMA_OF which has unmet direct dependencies (DMADEVICES && OF) This adds a dependency on CONFIG_OF. Since this means we no longer need to select 'DMA_OF', I'm dropping that line as well. Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-08dmaengine: stm32: use %p format specfier for pointerVinod Koul
Pointer print was using explict cast and printing as %x which causes below warn on some arch's so print using %p format specfier. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-08dmaengine: stm32-dmamux: Fix a NULL vs IS_ERR() check in probeDan Carpenter
devm_ioremap_resource() doesn't return NULL, it returns error pointers. Fixes: df7e762db5f6 ("dmaengine: Add STM32 DMAMUX driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>