summaryrefslogtreecommitdiff
path: root/drivers/edac/amd64_edac.h
AgeCommit message (Collapse)Author
2011-03-17amd64_edac: Sanitize f10_get_base_addr_offsetBorislav Petkov
This function maps the system address to the normalized DCT address. Document what the code does for more clarity and wrap insane bitmasks in a more understandable macro which generates them. Also, reduce number of arguments passed to the function. Finally, rename this function to what it actually does. No functional change. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17amd64_edac: Cleanup chipselect handlingBorislav Petkov
Add a struct representing the DRAM chip select base/limit register pairs. Concentrate all CS handling in a single function. Also, add CS looping macros for cleaner, more readable code. While at it, adjust code to F15h. Finally, do smaller macro names cleanups (remove family names from register macros) and debug messages clarification. No functional change. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17amd64_edac: Cleanup DHAR handlingBorislav Petkov
Adjust to F15h, simplify code, fixup macros. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17amd64_edac: Remove DRAM base/limit subfields cachingBorislav Petkov
Add a struct representing the DRAM base/limit range pairs and remove all cached subfields. Replace them with accessor functions, which actually saves us some space: text data bss dec hex filename 14712 1577 336 16625 40f1 drivers/edac/amd64_edac_mod.o.after 14831 1609 336 16776 4188 drivers/edac/amd64_edac_mod.o.before Also, it simplifies the code a lot allowing to merge the K8 and F10h routines. No functional change. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-17amd64_edac: Add support for F15h DCT PCI config accessesBorislav Petkov
F15h "multiplexes" between the configuration space of the two DRAM controllers by toggling D18F1x10C[DctCfgSel] while F10h has a different set of registers for DCT0, and DCT1 in extended PCI config space. Add DCT configuration space accessors per family thus wrapping all the different access prerequisites. Clean up code while at it, shorten names. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC: Fixup scrubrate manipulationBorislav Petkov
Make the ->{get|set}_sdram_scrub_rate return the actual scrub rate bandwidth it succeeded setting and remove superfluous arg pointer used for that. A negative value returned still means that an error occurred while setting the scrubrate. Document this for future reference. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Carve out ECC-related hw settingsBorislav Petkov
This is in preparation for the init path reorganization where we want only to 1) test whether a particular node supports ECC 2) can it be enabled and only then do the necessary allocation/initialization. For that, we need to decouple the ECC settings of the node from the instance's descriptor. The should be no functional change introduced by this patch. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Remove PCI ECS enabling functionsBorislav Petkov
PCI ECS is being enabled by default since 2.6.26 on AMD so this code is just superfluous now, remove it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Allocate driver instances dynamicallyBorislav Petkov
Remove static allocation in favor of dynamically allocating space for as many driver instances as northbridges present on the system. There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Rework printk macrosBorislav Petkov
Add a macro per printk level, shorten up error messages. Add relevant information to KERN_INFO level. No functional change. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Rename CPU PCI devicesBorislav Petkov
Rename variables representing PCI devices to their BKDG names for faster search and shorter, clearer code. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Concentrate per-family init even moreBorislav Petkov
Move the remaining per-family init code into the proper place and simplify the rest of the initialization. Reorganize error handling in amd64_init_one_instance(). Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Simplify CPU family detectionBorislav Petkov
Concentrate CPU family detection in the per-family init function. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Add per-family init functionBorislav Petkov
Run a per-family init function which does all the settings based on the family this driver instance is running on. Move the scrubrate calculation in it and simplify code. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Remove F11h supportBorislav Petkov
F11h doesn't support DRAM ECC so whack it away. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-10-21EDAC, MCE: Complete NB MCE decodersBorislav Petkov
Add support for decoding F14h BU MCEs and improve decoding of the remaining families. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-10-21EDAC, MCE: Rename filesBorislav Petkov
Drop "edac_" string from the filenames since they're prefixed with edac/ in their pathname anyway. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-10-21EDAC, MCE: Rework MCE injectionBorislav Petkov
Add sysfs injection facilities for testing of the MCE decoding code. Remove large parts of amd64_edac_dbg.c, as a result, which did only NB MCE injection anyway and the new injection code supports that functionality already. Add an injection module so that MCE decoding code in production kernels like those in RHEL and SLES can be tested. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-08-03amd64_edac: Remove unneeded definesBorislav Petkov
All F2x110-related bit defines are used at only one place so replace them with simple BIT() macros. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Doug Thompson <dougthompson@xmission.com>
2010-08-03amd64_edac: Sanitize syndrome extractionBorislav Petkov
Remove the two syndrome extraction macros and add a single function which does the same thing but with proper typechecking. While at it, make sure to cache ECC syndrome size and dump it in debug output. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-03-01amd64_edac: Simplify ECC override handlingBorislav Petkov
No need for clearing ecc_enable_override and checking it in two places. Instead, simply check it during probing and act accordingly. Also, rename the flag bitfields according to the functionality they actually represent. What is more, make sure original BIOS ECC settings are restored when the module is unloaded. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-08amd64_edac: bump driver versionBorislav Petkov
This was long overdue ... Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: remove early hw support checkBorislav Petkov
The .probe_valid_hardware low_ops member checked whether the DCTs are in DDR3 mode and bailed out if so. Now that all the needed changes for DDR3 support is in place, remove it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: enhance address to DRAM bank mappingBorislav Petkov
Add cs mode to cs size mapping tables for DDR2 and DDR3 and F10 and all K8 flavors and remove klugdy table of pseudo values. Add a low_ops->dbam_to_cs member which is family-specific and replaces low_ops->dbam_map_to_pages since the pages calculation is a one liner now. Further cleanups, while at it: - shorten family name defines - align amd64_family_types struct members Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: cleanup DRAM cfg low debug outputBorislav Petkov
Carve out the register-specific debug statements into a separate function, clarify meanings of the single bitfields in the register, remove irrelevant output and macros. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: wrap-up pci config read error handlingBorislav Petkov
Add a pci config read wrapper for signaling pci config space access errors instead of them being visible only on a debug build. This is important on amd64_edac since it uses all those pci config register values to access the DRAM/DIMM configuration of the nodes. In addition, the wrapper makes a _lot_ (look at the diffstat!) of error handling code superfluous and improves much of the overall code readability by removing error handling details out of the way. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: unify MCGCTL ECC switchingBorislav Petkov
Unify almost identical code into one function and remove NUMA-specific usage (specifically cpumask_of_node()) in favor of generic topology methods. Remove unused defines, while at it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07amd64_edac: beef up DRAM error injectionBorislav Petkov
When injecting DRAM ECC errors (F3xBC_x8), EccVector[15:0] is a bitmask of which bits should be error injected when written to and holds the payload of 16-bit DRAM word when read, respectively. Add /sysfs members to show the DRAM ECC section/word/vector. Fail wrong injection values entered over /sysfs instead of truncating them. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07amd64_edac: fix chip select handlingBorislav Petkov
Different processor families support a different number of chip selects. Handle this in a family-dependent way with the proper values assigned at init time (see amd64_set_dct_base_and_mask). Remove _DCSM_COUNT defines since they're used at one place and originate from public documentation. CC: Keith Mannthey <kmannth@us.ibm.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-10-07amd64_edac: fix driver instance lookup table allocationBorislav Petkov
Allocate memory statically for 8-node machines max for simplicity instead of relying on MAX_NUMNODES which is 0 on !CONFIG_NUMA builds. Spotted by Jan Beulich. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14x86, mce: pass mce info to EDAC for decodingBorislav Petkov
Move NB decoder along with required defines to EDAC MCE core. Add registration routines for further decoding of the MCE info in the AMD64 EDAC module. CC: Andi Kleen <andi@firstfloor.org> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14amd64_edac: cleanup/complete NB MCE decodingBorislav Petkov
* don't dump info which mcheck already does * update to newest BKDG * mv amd64_process_error_info -> amd64_decode_nb_mce * shorten error struct names * remove redundant info ptr in amd64_process_error_info * remove unused ErrorCodeExt[19:16] (MCx_STATUS) defines Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14amd64_edac: cleanup amd64_process_error_infoBorislav Petkov
* mv amd64_error_info_regs -> err_regs * remove redundant info ptr Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14EDAC: move MCE error descriptions to EDAC coreBorislav Petkov
This is in preparation of adding AMD-specific MCE decoding functionality to the EDAC core. The error decoding macros originate from the AMD64 EDAC driver albeit in a simplified and cleaned up version here. While at it, add macros to generate the error description strings and use them in the error type decoders directly which removes a bunch of code and makes the decoding functions much more readable. Also, fix strings and shorten macro names. Remove superfluous htlink_msgs. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-26amd64_edac: misc small cleanupsBorislav Petkov
- cleanup debug calls - shorten function names - cleanup error exit paths Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add module registration routinesDoug Thompson
Also, link into Kbuild by adding Kconfig and Makefile entries. Borislav: - Kconfig/Makefile splitting - use zero-sized arrays for the sysfs attrs if not enabled - rename sysfs attrs to more conform values - shorten CONFIG_ names - make multiple structure members assignment vertically aligned - fix/cleanup comments - fix function return value patterns - fix err labels - fix a memleak bug caught by Ingo - remove the NUMA dependency and use num_k8_northbrides for initializing a driver instance per NB. - do not copy the pvt contents into the mci struct in amd64_init_2nd_stage() and save it in the mci->pvt_info void ptr instead. - cleanup debug calls - simplify amd64_setup_pci_device() Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add ECC reporting initializersDoug Thompson
Borislav: - convert to the new {rd|wr}msr_on_cpus interfaces. - convert pvt->old_mcgctl to a bitmask thus saving some bytes - fix/cleanup comments - fix function return value patterns - add a proper bugfix found by Doug to amd64_check_ecc_enabled where we missed checking for the ECC enabled bit in NB CFG. - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add driver headerDoug Thompson
Borislav: - remove register bit descriptions (complete text in BKDG) - cleanup and remove excessive/superfluous comments Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
generated by cgit (git 2.34.1) at 2024-06-17 05:11:00 +0000