summaryrefslogtreecommitdiff
path: root/drivers/firewire
AgeCommit message (Collapse)Author
2014-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Steady transitioning of the BPF instructure to a generic spot so all kernel subsystems can make use of it, from Alexei Starovoitov. 2) SFC driver supports busy polling, from Alexandre Rames. 3) Take advantage of hash table in UDP multicast delivery, from David Held. 4) Lighten locking, in particular by getting rid of the LRU lists, in inet frag handling. From Florian Westphal. 5) Add support for various RFC6458 control messages in SCTP, from Geir Ola Vaagland. 6) Allow to filter bridge forwarding database dumps by device, from Jamal Hadi Salim. 7) virtio-net also now supports busy polling, from Jason Wang. 8) Some low level optimization tweaks in pktgen from Jesper Dangaard Brouer. 9) Add support for ipv6 address generation modes, so that userland can have some input into the process. From Jiri Pirko. 10) Consolidate common TCP connection request code in ipv4 and ipv6, from Octavian Purdila. 11) New ARP packet logger in netfilter, from Pablo Neira Ayuso. 12) Generic resizable RCU hash table, with intial users in netlink and nftables. From Thomas Graf. 13) Maintain a name assignment type so that userspace can see where a network device name came from (enumerated by kernel, assigned explicitly by userspace, etc.) From Tom Gundersen. 14) Automatic flow label generation on transmit in ipv6, from Tom Herbert. 15) New packet timestamping facilities from Willem de Bruijn, meant to assist in measuring latencies going into/out-of the packet scheduler, latency from TCP data transmission to ACK, etc" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits) cxgb4 : Disable recursive mailbox commands when enabling vi net: reduce USB network driver config options. tg3: Modify tg3_tso_bug() to handle multiple TX rings amd-xgbe: Perform phy connect/disconnect at dev open/stop amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask net: sun4i-emac: fix memory leak on bad packet sctp: fix possible seqlock seadlock in sctp_packet_transmit() Revert "net: phy: Set the driver when registering an MDIO bus device" cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine team: Simplify return path of team_newlink bridge: Update outdated comment on promiscuous mode net-timestamp: ACK timestamp for bytestreams net-timestamp: TCP timestamping net-timestamp: SCHED timestamp on entering packet scheduler net-timestamp: add key to disambiguate concurrent datagrams net-timestamp: move timestamp flags out of sk_flags net-timestamp: extend SCM_TIMESTAMPING ancillary data struct cxgb4i : Move stray CPL definitions to cxgb4 driver tcp: reduce spurious retransmits due to transient SACK reneging qlcnic: Initialize dcbnl_ops before register_netdev ...
2014-08-05Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer and time updates from Thomas Gleixner: "A rather large update of timers, timekeeping & co - Core timekeeping code is year-2038 safe now for 32bit machines. Now we just need to fix all in kernel users and the gazillion of user space interfaces which rely on timespec/timeval :) - Better cache layout for the timekeeping internal data structures. - Proper nanosecond based interfaces for in kernel users. - Tree wide cleanup of code which wants nanoseconds but does hoops and loops to convert back and forth from timespecs. Some of it definitely belongs into the ugly code museum. - Consolidation of the timekeeping interface zoo. - A fast NMI safe accessor to clock monotonic for tracing. This is a long standing request to support correlated user/kernel space traces. With proper NTP frequency correction it's also suitable for correlation of traces accross separate machines. - Checkpoint/restart support for timerfd. - A few NOHZ[_FULL] improvements in the [hr]timer code. - Code move from kernel to kernel/time of all time* related code. - New clocksource/event drivers from the ARM universe. I'm really impressed that despite an architected timer in the newer chips SoC manufacturers insist on inventing new and differently broken SoC specific timers. [ Ed. "Impressed"? I don't think that word means what you think it means ] - Another round of code move from arch to drivers. Looks like most of the legacy mess in ARM regarding timers is sorted out except for a few obnoxious strongholds. - The usual updates and fixlets all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits) timekeeping: Fixup typo in update_vsyscall_old definition clocksource: document some basic timekeeping concepts timekeeping: Use cached ntp_tick_length when accumulating error timekeeping: Rework frequency adjustments to work better w/ nohz timekeeping: Minor fixup for timespec64->timespec assignment ftrace: Provide trace clocks monotonic timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC seqcount: Add raw_write_seqcount_latch() seqcount: Provide raw_read_seqcount() timekeeping: Use tk_read_base as argument for timekeeping_get_ns() timekeeping: Create struct tk_read_base and use it in struct timekeeper timekeeping: Restructure the timekeeper some more clocksource: Get rid of cycle_last clocksource: Move cycle_last validation to core code clocksource: Make delta calculation a function wireless: ath9k: Get rid of timespec conversions drm: vmwgfx: Use nsec based interfaces drm: i915: Use nsec based interfaces timekeeping: Provide ktime_get_raw() hangcheck-timer: Use ktime_get_ns() ...
2014-07-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-27Merge tag 'firewire-fix-vt6315' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire regression fix from Stefan Richter: "IEEE 1394 (FireWire) subsystem fix: MSI don't work on VIA PCIe controllers with some isochronous workloads (regression since v3.16-rc1)" * tag 'firewire-fix-vt6315' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: disable MSI for VIA VT6315 again
2014-07-23firewire: ohci: disable MSI for VIA VT6315 againStefan Richter
Revert half of commit d151f9854f21: If isochronous I/O is attempted with packets larget than 1 kByte, VIA VT6315 rev 01 immediately stops to generate any interrupts if MSI are used. Fix this by going back to legacy interrupts. [Thread "Isochronous streaming with VT6315 OHCI", http://marc.info/?t=139049641500003] With smaller packets, the loss of IRQs happens too but only very rarely --- rarely eneough that it was not yet possible for me to determine whether QUIRK_NO_MSI is an actual fix for this rare variation of this chip bug. I am keeping QUIRK_CYCLE_TIMER off of VT6315 rev >= 1 because this has been verified by myself with certainty. On the other hand, I am also keeping QUIRK_CYCLE_TIMER on for VT6315 rev 0 because I don't know at this time whether this revision accesses Cycle Timer non-atomically like most of the other VIA OHCIs are known to do. Reported-by: Rémy Bruno <remy-fw@remy.trinnov.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-07-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15net: set name_assign_type in alloc_netdev()Tom Gundersen
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14Merge tag 'firewire-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fix from Stefan Richter: "The 1394 drivers cannot and are not supposed to be built on platforms which don't provide the DMA mapping API (regression since v3.16-rc1 with CONFIG_COMPILE_TEST=y on some architectures)" * tag 'firewire-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: IEEE 1394 (FireWire) support should depend on HAS_DMA
2014-07-13firewire: IEEE 1394 (FireWire) support should depend on HAS_DMAGeert Uytterhoeven
Commit b3d681a4fc108f9653bbb44e4f4e72db2b8a5734 ("firewire: Use COMPILE_TEST for build testing") added COMPILE_TEST as an alternative dependency for the purpose of build testing the firewire core. However, this bypasses all other implicit dependencies assumed by PCI, like HAS_DMA. If NO_DMA=y: drivers/built-in.o: In function `fw_iso_buffer_destroy': (.text+0x36a096): undefined reference to `dma_unmap_page' drivers/built-in.o: In function `fw_iso_buffer_map_dma': (.text+0x36a164): undefined reference to `dma_map_page' drivers/built-in.o: In function `fw_iso_buffer_map_dma': (.text+0x36a172): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `sbp2_send_management_orb': sbp2.c:(.text+0x36c6b4): undefined reference to `dma_map_single' sbp2.c:(.text+0x36c6c8): undefined reference to `dma_mapping_error' sbp2.c:(.text+0x36c772): undefined reference to `dma_map_single' sbp2.c:(.text+0x36c786): undefined reference to `dma_mapping_error' sbp2.c:(.text+0x36c854): undefined reference to `dma_unmap_single' sbp2.c:(.text+0x36c872): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `sbp2_map_scatterlist': sbp2.c:(.text+0x36ccbc): undefined reference to `scsi_dma_map' sbp2.c:(.text+0x36cd36): undefined reference to `dma_map_single' sbp2.c:(.text+0x36cd4e): undefined reference to `dma_mapping_error' sbp2.c:(.text+0x36cd84): undefined reference to `scsi_dma_unmap' drivers/built-in.o: In function `sbp2_unmap_scatterlist': sbp2.c:(.text+0x36cda6): undefined reference to `scsi_dma_unmap' sbp2.c:(.text+0x36cdc6): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `complete_command_orb': sbp2.c:(.text+0x36d6ac): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `sbp2_scsi_queuecommand': sbp2.c:(.text+0x36d8e0): undefined reference to `dma_map_single' sbp2.c:(.text+0x36d8f6): undefined reference to `dma_mapping_error' Add an explicit dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-06-12firewire: Use ktime_get_ts()Thomas Gleixner
do_posix_clock_monotonic_gettime() is a leftover from the initial posix timer implementation which maps to ktime_get_ts() Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Link: http://lkml.kernel.org/r/20140611234607.351283464@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-06-04Merge tag 'sound-3.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into next Pull sound updates from Takashi Iwai: "At this time, majority of changes come from ASoC world while we got a few new drivers in other places for FireWire and USB. There have been lots of ASoC core cleanups / refactoring, but very little visible to external users. ASoC: - Support for specifying aux CODECs in DT - Removal of the deprecated mux and enum macros - More moves towards full componentisation - Removal of some unused I/O code - Lots of cleanups, fixes and enhancements to the davinci, Freescale, Haswell and Realtek drivers - Several drivers exposed directly in Kconfig for use with simple-card - GPIO descriptor support for jacks - More updates and fixes to the Freescale SSI, Intel and rsnd drivers - New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651 and ST STA350, Analog Devices ADAU1361, ADAU1381, ADAU1761 and ADAU1781, and Realtek RT5677 HD-audio: - Clean up Dell headset quirks - Noise fixes for Dell and Sony laptops - Thinkpad T440 dock fix - Realtek codec updates (ALC293,ALC233,ALC3235) - Tegra HD-audio HDMI support FireWire-audio: - FireWire audio stack enhancement (AMDTP, MIDI), support for incoming isochronous stream and duplex streams with timestamp synchronization - BeBoB-based devices support - Fireworks-based device support USB-audio: - Behringer BCD2000 USB device support Misc: - Clean up of a few old drivers, atmel, fm801, etc" * tag 'sound-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (480 commits) ASoC: Fix wrong argument for card remove callbacks ASoC: free jack GPIOs before the sound card is freed ALSA: firewire-lib: Remove a comment about restriction of asynchronous operation ASoC: cache: Fix error code when not using ASoC level cache ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop ALSA: firewire-lib: Use IEC 61883-6 compliant labels for Raw Audio data ASoC: add RT5677 CODEC driver ASoC: intel: The Baytrail/MAX98090 driver depends on I2C ASoC: rt5640: Add the function "get_clk_info" to RL6231 shared support ASoC: rt5640: Add the function of the PLL clock calculation to RL6231 shared support ASoC: rt5640: Add RL6231 class device shared support for RT5640, RT5645 and RT5651 ASoC: cache: Fix possible ZERO_SIZE_PTR pointer dereferencing error. ASoC: Add helper functions to cast from DAPM context to CODEC/platform ALSA: bebob: sizeof() vs ARRAY_SIZE() typo ASoC: wm9713: correct mono out PGA sources ALSA: synth: emux: soundfont.c: Cleaning up memory leak ASoC: fsl: Remove dependencies of boards for SND_SOC_EUKREA_TLV320 ASoC: fsl-ssi: Use regmap ASoC: fsl-ssi: reorder and document fsl_ssi_private ...
2014-06-04Merge tag 'firewire-updates' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 into next Pull firewire updates from Stefan Richter: "IEEE 1394 (FireWire) subsystem changes: One optimization for some VIA controllers, one fix, one kconfig brushup" * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: enable MSI for VIA VT6315 rev 1, drop cycle timer quirk firewire: Use COMPILE_TEST for build testing firewire: net: fix NULL derefencing in fwnet_probe()
2014-06-03Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull core locking updates from Ingo Molnar: "The main changes in this cycle were: - reduced/streamlined smp_mb__*() interface that allows more usecases and makes the existing ones less buggy, especially in rarer architectures - add rwsem implementation comments - bump up lockdep limits" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) rwsem: Add comments to explain the meaning of the rwsem's count field lockdep: Increase static allocations arch: Mass conversion of smp_mb__*() arch,doc: Convert smp_mb__*() arch,xtensa: Convert smp_mb__*() arch,x86: Convert smp_mb__*() arch,tile: Convert smp_mb__*() arch,sparc: Convert smp_mb__*() arch,sh: Convert smp_mb__*() arch,score: Convert smp_mb__*() arch,s390: Convert smp_mb__*() arch,powerpc: Convert smp_mb__*() arch,parisc: Convert smp_mb__*() arch,openrisc: Convert smp_mb__*() arch,mn10300: Convert smp_mb__*() arch,mips: Convert smp_mb__*() arch,metag: Convert smp_mb__*() arch,m68k: Convert smp_mb__*() arch,m32r: Convert smp_mb__*() arch,ia64: Convert smp_mb__*() ...
2014-05-29firewire: ohci: enable MSI for VIA VT6315 rev 1, drop cycle timer quirkStefan Richter
Commit af0cdf494781 "firewire: ohci: fix regression with VIA VT6315, disable MSI" acted upon a report against VT6315 rev 0: http://linux.derkeiler.com/Mailing-Lists/Kernel/2010-12/msg02301.html $ lspci -nn VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] I now got a card with $ lspci -nn VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] (rev 01) and this works fine with MSI enabled. Second, I tested this VT6315 rev 1 without CYCLE_TIMER quirk flag using http://me.in-berlin.de/~s5r6/linux1394/utils/test_cycle_time_v20100125.c and found that this chip does in fact access the cycle timer atomically. Things I can't test because I don't have the hardware: - whether VT6315 rev 0 really needs QUIRK_CYCLE_TIMER, - whether the VT6320 PCI device needs QUIRK_CYCLE_TIMER, - whether the VT6325 and VT6330 PCIe devices need QUIRK_CYCLE_TIMER and QUIRK_NO_MSI. Hence, just add a whitelist entry specifically for VT6315 rev >= 1 without any quirk flags. Before this entry we need an extra entry to catch VT6315 rev <= 0 due to how our ID matching logic works. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-05-29firewire: revert to 4 GB RDMA, fix protocols using Memory SpaceStefan Richter
Undo a feature introduced in v3.14 by commit fcd46b34425d "firewire: Enable remote DMA above 4 GB". That change raised the minimum address at which protocol drivers and user programs can register for request reception from 0x0001'0000'0000 to 0x8000'0000'0000. It turned out that at least one vendor-specific protocol exists which uses lower addresses: https://bugzilla.kernel.org/show_bug.cgi?id=76921 For the time being, revert most of commit fcd46b34425d so that affected protocols work like with kernel v3.13 and before. Just keep the valid documentation parts from the regressing commit, and the ability to identify controllers which could be programmed to accept >32 bit physical DMA addresses. The rest of fcd46b34425d should probably be brought back as an optional instead of default feature. Reported-by: Fabien Spindler <fabien.spindler@inria.fr> Cc: <stable@vger.kernel.org> # 3.14+ Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-05-26ALSA: firewire/bebob: Add a workaround for M-Audio special Firewire seriesTakashi Sakamoto
In post commit, a quirk of this firmware about transactions is reported. This commit apply a workaround for this quirk. They often fail transactions due to gap_count mismatch. This state is changed by generating bus reset. The fw_schedule_bus_reset() is an exported symbol in firewire-core. But there are no header for public. This commit moves its prototype from drivers/firewire/core.h to include/linux/firewire.h. This mismatch still affects bus management before generating this bus reset. It still takes a time to call driver's probe() because transactions are still often failed. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-17firewire: Use COMPILE_TEST for build testingJean Delvare
Stop using BROKEN as an alternative dependency for the purpose of build testing the firewire core. The newly introduced COMPILE_TEST is better suited for that purpose. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-05-12firewire: net: fix NULL derefencing in fwnet_probe()Daeseok Youn
"dev" and "net" are NULL when alloc_netdev() is failed. So just unlock and return an error. Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-08Merge branch 'for-3.14-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: "This pull request contains a workqueue usage fix for firewire. For quite a long time now, workqueue only treats two work items identical iff both their addresses and callbacks match. This is to avoid introducing false dependency through the work item being recycled while being executed. This changes non-reentrancy guarantee for the users of PREPARE[_DELAYED]_WORK() - if the function changes, reentrancy isn't guaranteed against the previous instance. Firewire depended on such nonreentrancy guarantee. This is fixed by doing the work item multiplexing from firewire proper while keeping the work function unchanged" * 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: firewire: don't use PREPARE_DELAYED_WORK
2014-03-07firewire: don't use PREPARE_DELAYED_WORKTejun Heo
PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. firewire core-device and sbp2 have been been multiplexing work items with multiple work functions. Introduce fw_device_workfn() and sbp2_lu_workfn() which invoke fw_device->workfn and sbp2_logical_unit->workfn respectively and always use the two functions as the work functions and update the users to set the ->workfn fields instead of overriding work functions using PREPARE_DELAYED_WORK(). This fixes a variety of possible regressions since a2c1c57be8d9 "workqueue: consider work function when searching for busy work items" due to which fw_workqueue lost its required non-reentrancy property. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: linux1394-devel@lists.sourceforge.net Cc: stable@vger.kernel.org # v3.9+ Cc: stable@vger.kernel.org # v3.8.2+ Cc: stable@vger.kernel.org # v3.4.60+ Cc: stable@vger.kernel.org # v3.2.40+
2014-03-06firewire: ohci: fix probe failure with Agere/LSI controllersStefan Richter
Since commit bd972688eb24 "firewire: ohci: Fix 'failed to read phy reg' on FW643 rev8", there is a high chance that firewire-ohci fails to initialize LSI née Agere controllers. https://bugzilla.kernel.org/show_bug.cgi?id=65151 Peter Hurley points out the reason: IEEE 1394a:2000 clause 5A.1 (or IEEE 1394:2008 clause 17.2.1) say: "The PHY shall insure that no more than 10 ms elapse from the reassertion of LPS until the interface is reset. The link shall not assert LReq until the reset is complete." In other words, the link needs to give the PHY at least 10 ms to get the interface operational. With just the msleep(1) in bd972688eb24, the first read_phy_reg() during ohci_enable() may happen before the phy-link interface reset was finished, and fail. Due to the high variability of msleep(n) with small n, this failure was not fully reproducible, and not apparent at all with low CONFIG_HZ setting. On the other hand, Peter can no longer reproduce the issue with FW643 rev8. The read phy reg failures that happened back then may have had an unrelated cause. So, just revert bd972688eb24, except for the valid comment on TSB82AA2 cards. Reported-by: Mikhail Gavrilov Reported-by: Jay Fenlason <fenlason@redhat.com> Reported-by: Clemens Ladisch <clemens@ladisch.de> Reported-by: Peter Hurley <peter@hurleysoftware.com> Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-02-28firewire: net: fix use after freeStefan Richter
Commit 8408dc1c14c1 "firewire: net: use dev_printk API" introduced a use-after-free in a failure path. fwnet_transmit_packet_failed(ptask) may free ptask, then the dev_err() call dereferenced it. The fix is straightforward; simply reorder the two calls. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org # v3.4+ Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-01-20firewire: Enable remote DMA above 4 GBStefan Richter
This makes all of a machine's memory accessible to remote debugging via FireWire, using the physical response unit (i.e. RDMA) of OHCI-1394 link layer controllers. This requires actual support by the controller. The only ones currently known to support it are Agere/LSI FW643. Most if not all other OHCI-1394 controllers do not implement the optional Physical Upper Bound register. With them, RDMA will continue to be limited to the lowermost 4 GB. firewire-ohci's startup message in the kernel log is augmented to tell whether the controller does expose more than 4 GB to RDMA. While OHCI-1394 allows for a maximum Physical Upper Bound of 0xffff'0000'0000 (near 256 TB), this implementation sets it to 0x8000'0000'0000 (128 TB) in order to avoid interference with applications that require interrupt-served asynchronous request reception at respectively low addresses. Note, this change does not switch remote DMA on. It only increases the range of remote access to all memory (instead of just 4 GB) whenever remote DMA was switched on by other means. The latter is achieved by setting firewire-ohci's remote_dma parameter, or if the physical DMA filter is opened through firewire-sbp2. Derived from patch "firewire: Enable physical DMA above 4GB" by Peter Hurley <peter@hurleysoftware.com> from March 27, 2013. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-01-12firewire: ohci: Turn remote DMA support into a module parameterLubomir Rintel
This makes it possible to debug kernel over FireWire without the need to recompile it. [Stefan R: changed description from "...0" to "...N"] Cc: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-12-15firewire: sbp2: bring back WRITE SAME supportStefan Richter
Commit 54b2b50c20a6 "[SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers" disabled WRITE SAME support for all SBP-2 attached targets. But as described in the changelog of commit b0ea5f19d3d8 "firewire: sbp2: allow WRITE SAME and REPORT SUPPORTED OPERATION CODES", it is not required to blacklist WRITE SAME. Bring the feature back by reverting the sbp2.c hunk of commit 54b2b50c20a6. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: stable@kernel.org
2013-11-29[SCSI] Disable WRITE SAME for RAID and virtual host adapter driversMartin K. Petersen
Some host adapters do not pass commands through to the target disk directly. Instead they provide an emulated target which may or may not accurately report its capabilities. In some cases the physical device characteristics are reported even when the host adapter is processing commands on the device's behalf. This can lead to adapter firmware hangs or excessive I/O errors. This patch disables WRITE SAME for devices connected to host adapters that provide an emulated target. Driver writers can disable WRITE SAME by setting the no_write_same flag in the host adapter template. [jejb: fix up rejections due to eh_deadline patch] Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-29firewire: ohci: Fix deadlock at bus resetStephan Gatzka
Put bus_reset_work into its own workqueue. By doing this, forward progress of bus_reset_work() is guaranteed if the work is switched over to a rescuer thread. Switching work to a rescuer thread happens if a new worker thread could not be allocated in certain time (MAYDAY_INITIAL_TIMEOUT, typically 10 ms). This might not be possible under high memory pressure or even on a heavily loaded embedded system running a slow serial console. The former deadlock occured in the following situation: The rescuer thread ran fw_device_init->read_config_rom->read_rom->fw_run_transaction. fw_run_transaction blocked waiting for the completion object. This completion object would have been completed in bus_reset_work, but this work was never executed in the rescuer thread due to its strictly sequential behaviour. [Stefan R.: Removed WQ_NON_REENTRANT flag from allocation because it is no longer needed in current kernels. Add it back if you backport to kernels older than 3.7, i.e. one which does not contain dbf2576e37da "workqueue: make all workqueues non-reentrant". Swapped order of destroy_workqueue and pci_unregister_driver.] Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-08-29firewire: ohci: Change module_pci_driver to module_init/module_exitStephan Gatzka
This is a prerequisite to allocate a per driver self_id workqueue. This reverts the ohci.c part of patch fe2af11c220c7bb3a67f7aec0594811e5c59e019. Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-08-19firewire: ohci: beautify some macro definitionsStefan Richter
a) Sort device IDs by vendor -- device -- revision. b) Write quirk flags in hexadecimal. This affects the user-visible output of "modinfo firewire-ohci". Since more flags have been added recently, it is now easier to cope with them in hexadecimal represen- tation. Besides, the device-specific combination of quirk flags is shown in hexadecimal in the kernel log too. (And firewire-sbp2 presents its own quirk flags in modinfo as hexadecimals as well.) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-08-19firewire: ohci: change confusing name of a struct memberStefan Richter
We have got struct descriptor *descriptors; dma_addr_t descriptors_bus; dma_addr_t buffer_bus; struct descriptor buffer[0]; void *misc_buffer; dma_addr_t misc_buffer_bus; __be32 *config_rom; dma_addr_t config_rom_bus; __be32 *next_config_rom; dma_addr_t next_config_rom_bus; But then we have got __le32 *self_id_cpu; dma_addr_t self_id_bus; Better apply the pattern of xyz vs. xyz_bus to self_id vs. self_id_bus as well. The _cpu suffix looks particularly weird in conversions from little endian to CPU endian. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-07-30firewire: core: typecast from gfp_t to bool more safelyStefan Richter
An idr related patch introduced the following sparse warning: drivers/firewire/core-cdev.c:488:33: warning: incorrect type in initializer (different base types) drivers/firewire/core-cdev.c:488:33: expected bool [unsigned] [usertype] preload drivers/firewire/core-cdev.c:488:33: got restricted gfp_t So let's convert from gfp_t bitfield to Boolean explicitly and safely. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-07-30firewire: WQ_NON_REENTRANT is meaningless and going awayTejun Heo
dbf2576e37 ("workqueue: make all workqueues non-reentrant") made WQ_NON_REENTRANT no-op and the flag is going away. Remove its usages. This patch doesn't introduce any behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-07-27firewire: fix libdc1394/FlyCap2 iso event regressionClemens Ladisch
Commit 18d627113b83 (firewire: prevent dropping of completed iso packet header data) was intended to be an obvious bug fix, but libdc1394 and FlyCap2 depend on the old behaviour by ignoring all returned information and thus not noticing that not all packets have been received yet. The result was that the video frame buffers would be saved before they contained the correct data. Reintroduce the old behaviour for old clients. Tested-by: Stepan Salenikovich <stepan.salenikovich@gmail.com> Tested-by: Josep Bosch <jep250@gmail.com> Cc: <stable@vger.kernel.org> # 3.4+ Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-06-09firewire: remove support of fw_driver.driver.probe and .remove methodsStefan Richter
After all IEEE 1394 high-level drivers being converted to bus-specific .probe/.remove methods, remove support of the obsolete generic methods. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-06-09firewire: introduce fw_driver.probe and .remove methodsStefan Richter
FireWire upper layer drivers are converted from generic struct driver.probe() and .remove() to bus-specific struct fw_driver.probe() and .remove(). The new .probe() adds a const struct ieee1394_device_id *id argument, indicating the entry in the driver's device identifiers table which matched the fw_unit to be probed. This new argument is used by the snd-firewire-speakers driver to look up device-specific parameters and methods. There is at least one other FireWire audio driver currently in development in which this will be useful too. The new .remove() drops the unused error return code. Although all in-tree drivers are being converted to the new methods, support for the old methods is left in place in this commit. This allows public developer trees to merge this commit and then move to the new fw_driver methods. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Clemens Ladisch <clemens@ladisch.de> (for sound/firewire/) Cc: Peter Hurley <peter@hurleysoftware.com> (for drivers/staging/fwserial/)
2013-05-09Merge tag 'firewire-updates' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewure updates from Stefan Richter: - fix controller removal when controller is in suspended state - fix video reception on VIA VT6306 with gstreamer, MythTV, and maybe dv4l - fix a startup issue with Agere/LSI FW643-e2 - error logging improvements and other small updates * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: dump_stack() for PHY regs read/write failures firewire: ohci: Improve bus reset error messages firewire: ohci: Alias dev_* log functions firewire: ohci: Fix 'failed to read phy reg' on FW643 rev8 firewire: ohci: fix VIA VT6306 video reception firewire: ohci: Check LPS before register access on pci removal firewire: ohci: Fix double free_irq() firewire: remove unnecessary alloc/OOM messages firewire: sbp2: replace BUG_ON by WARN_ON firewire: core: remove an always false test firewire: Remove two unneeded checks for macros
2013-04-30firewire: ohci: dump_stack() for PHY regs read/write failuresPeter Hurley
A stack trace is an invaluable tool in determining the basis and cause of PHY regs read/write failures. Include PHY reg addr (and value for writes) in the diagnostic. [Stefan R: changed whitespace] Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-30firewire: ohci: Improve bus reset error messagesPeter Hurley
Many of the error messages possible from bus_reset_work() do not contain enough information to distinguish which error condition occurred nor enough information to evaluate the error afterwards. Differentiate all error conditions in bus_reset_work(); add additional information to make error diagnosis possible. [Stefan R: fixed self-ID endian conversion] Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-30firewire: ohci: Alias dev_* log functionsPeter Hurley
Convert dev_xxxx(ohci->card.device, ...) log functions to ohci_xxxx(ohci, ...). [Stefan R: Peter argues that this increases readability of the code.] [Stefan R: changed whitespace] Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-30firewire: ohci: Fix 'failed to read phy reg' on FW643 rev8Peter Hurley
With the LSI FW643 rev 8 [1], the first commanded bus reset at the conclusion of ohci_enable() has been observed to fail with the following messages: [ 4.884015] firewire_ohci 0000:01:00.0: failed to read phy reg .... [ 5.684012] firewire_ohci 0000:01:00.0: failed to read phy reg With drivers/firewire/ohci.c instrumented, the error condition [2] indicates the PHY arbitration state machine has timed out prior to enabling PHY LCtrl. Furthermore, instrumenting ohci_enable() shows that LPS has been enabled within 1 ms. Test LPS latching every 1 ms rather than every 50ms. [1] lspci -v 01:00.0 FireWire (IEEE 1394): LSI Corporation FW643 [TrueFire] PCIe 1394b Controller (rev 08) (prog-if 10 [OHCI]) Subsystem: LSI Corporation FW643 [TrueFire] PCIe 1394b Controller Flags: bus master, fast devsel, latency 0, IRQ 92 Memory at fbeff000 (64-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 3 Capabilities: [4c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [170] Device Serial Number 08-14-43-82-00-00-41-fc Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci [2] instrumented WARNING in read_phy_reg() [ 4.576010] ------------[ cut here ]------------ [ 4.576035] WARNING: at ./drivers/firewire/ohci.c:570 read_phy_reg+0x93/0xe0 [firewire_ohci]() [ 4.576050] Hardware name: Precision WorkStation T5400 [ 4.576058] failed to read phy reg:1 (phy(5) @ config enhance:19) [ 4.576068] Modules linked in: hid_logitech_dj hid_generic(+) usbhid <...snip...> [ 4.576140] Pid: 61, comm: kworker/2:1 Not tainted 3.8.0-2+fwtest-xeon #2+fwtest [ 4.576149] Call Trace: [ 4.576160] [<ffffffff8105468f>] warn_slowpath_common+0x7f/0xc0 [ 4.576168] [<ffffffff81054786>] warn_slowpath_fmt+0x46/0x50 [ 4.576178] [<ffffffffa00caca3>] read_phy_reg+0x93/0xe0 [firewire_ohci] [ 4.576188] [<ffffffffa00cae19>] ohci_read_phy_reg+0x39/0x60 [firewire_ohci] [ 4.576203] [<ffffffffa00731ff>] fw_send_phy_config+0xbf/0xe0 [firewire_core] [ 4.576214] [<ffffffffa006b2d6>] br_work+0x46/0xb0 [firewire_core] [ 4.576225] [<ffffffff81071e0c>] process_one_work+0x13c/0x500 [ 4.576238] [<ffffffffa006b290>] ? fw_card_initialize+0x180/0x180 [firewire_core] [ 4.576248] [<ffffffff810737ed>] worker_thread+0x16d/0x470 [ 4.576257] [<ffffffff81073680>] ? busy_worker_rebind_fn+0x100/0x100 [ 4.576266] [<ffffffff8107d160>] kthread+0xc0/0xd0 [ 4.576275] [<ffffffff816a0000>] ? pcpu_dump_alloc_info+0x1cb/0x2c4 [ 4.576284] [<ffffffff8107d0a0>] ? kthread_create_on_node+0x130/0x130 [ 4.576297] [<ffffffff816b2f6c>] ret_from_fork+0x7c/0xb0 [ 4.576305] [<ffffffff8107d0a0>] ? kthread_create_on_node+0x130/0x130 [ 4.576313] ---[ end trace cbc940994b300302 ]--- [Stefan R: Peter also reports a change of behavior with LSI FW323. Before the patch, there would often occur a lock transaction failure during firewire-core startup: [ 6.056022] firewire_core 0000:07:06.0: BM lock failed (timeout), making local node (ffc0) root This failure no longer happens after the patch, without an obvious reason for the failure or the fix.] [Stefan R: Added quirk flag, quirk table entry, and comment.] Reported-by: Tim Jordan <tim@insipid.org.uk> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-28firewire: ohci: fix VIA VT6306 video receptionAndy Leiserson
Add quirk for VT6306 wake bit behavior. VT6306 seems to reread the wrong descriptor when the wake bit is written. work around by putting a copy of the branch address in the first descriptor of the block. [Stefan R: This fixes the known broken video reception via gstreamer on VIA VT6306. 100% repeatable testcase: $ gst-launch-0.10 dv1394src \! dvdemux \! dvdec \! xvimagesink with a camcorder or other DV source connected. Likewise for MPEG2-TS reception via gstreamer, e.g. from TV settop boxes. Perhaps this also fixes dv4l on VT6306, but this is as yet untested. Kino, dvgrab or FFADO had not been affected by this chip quirk. Additional comments from Andy:] I've looked into some problems with the wake bit on a vt6306 family chip (1106:3044, rev 46). I used this firewire card in a mythtv setup (ISO receive MPEG2 stream) with Debian 2.6.32 kernels for ~2 years without problems. Since upgrading to 3.2, I've been having problems with the input stream freezing -- input data stops until I restart mythtv (I expect closing and reopening the device would be sufficient). This happens infrequently, maybe one out of 20 recordings. I eventually determined that the problem is more likely to occur if the system is loaded. I isolated the kernel version as the triggering SW factor and then specifically the change from dualbuffer back to packet-per-buffer DMA mode. The possibility that the controller does not properly respond to the wake bit was suggested in https://bugzilla.redhat.com/show_bug.cgi?id=415841, but not proven. Based on the fact that dualbuffer mode worked while packet-per-buffer has trouble, I guessed that upon seeing the wake bit written, the vt6306 controller only checks the branch address in the first descriptor of the block, even if that is not the correct place to look (because the block has multiple descriptors). This theory seems to be correct. When the ISO reception is hung, I am able to resume it by manually writing the branch address to the first descriptor in the block, and then writing the wake bit. I've had luck so far with the attached patch, so I'm including it. It's probably not a complete solution -- I haven't tested transmit modes to see whether they have a similar issue. I doubt that the quirk test is any cheaper than just writing the extra branch address in all cases, but it does reduce the risk of breaking other hardware. [Stefan R: omitted QUIRK_NO_MSI from VT6306 quirks table entry, changed whitespace] Signed-off-by: Andy Leiserson <andy@leiserson.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-28firewire: ohci: Check LPS before register access on pci removalPeter Hurley
A pci device can be removed while in its suspended state. If the ohci host controller is suspended, the PHY is also in low-power mode and LPS is disabled. If LPS is disabled, most of the host registers aren't accessible, including IntMaskClear. Furthermore, access to these registers when LPS is disabled can cause hard lockups on some hardware. Since interrupts are already disabled in this mode, further action is unnecessary. Test LPS before attempting to write IntMaskClear to disable interrupts. [Stefan R: whitespace changes] Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-28firewire: ohci: Fix double free_irq()Peter Hurley
A pci device can be removed while in its suspended state. Because the ohci driver freed the irq to suspend, free_irq() is called twice; once from pci_remove() and again from pci_suspend(), which issues the warning below [1]. Rather than allocate the irq in the .enable() path, move the allocation to .probe(). Consequently, the irq is not reallocated upon pci_resume() and thus is not freed upon pci_suspend(). [1] Warning reported by Mark Einon <mark.einon@gmail.com> when suspending an MSI MS-1727 GT740 laptop on Ubuntu 3.5.0-22-generic WARNING: at ./kernel/irq/manage.c:1198 __free_irq+0xa3/0x1e0() Hardware name: MS-1727 Trying to free already-free IRQ 16 Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables <...snip...> Pid: 4, comm: kworker/0:0 Tainted: P O 3.5.0-22-generic #34-Ubuntu Call Trace: [<ffffffff81051c1f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff81051d16>] warn_slowpath_fmt+0x46/0x50 [<ffffffff8103fa39>] ? default_spin_lock_flags+0x9/0x10 [<ffffffff810df6b3>] __free_irq+0xa3/0x1e0 [<ffffffff810df844>] free_irq+0x54/0xc0 [<ffffffffa005a27e>] pci_remove+0x6e/0x210 [firewire_ohci] [<ffffffff8135ae7f>] pci_device_remove+0x3f/0x110 [<ffffffff8141fdbc>] __device_release_driver+0x7c/0xe0 [<ffffffff8141fe4c>] device_release_driver+0x2c/0x40 [<ffffffff8141f5f1>] bus_remove_device+0xe1/0x120 [<ffffffff8141cd1a>] device_del+0x12a/0x1c0 [<ffffffff8141cdc6>] device_unregister+0x16/0x30 [<ffffffff81354784>] pci_stop_bus_device+0x94/0xa0 [<ffffffffa0091c67>] acpiphp_disable_slot+0xb7/0x1a0 [acpiphp] [<ffffffffa0090716>] ? get_slot_status+0x46/0xc0 [acpiphp] [<ffffffffa0091d7d>] acpiphp_check_bridge.isra.15+0x2d/0xf0 [acpiphp] [<ffffffffa0092442>] _handle_hotplug_event_bridge+0x372/0x4d0 [acpiphp] [<ffffffff81390f8c>] ? acpi_os_execute_deferred+0x2f/0x34 [<ffffffff8116e22d>] ? kfree+0xed/0x110 [<ffffffff8107086a>] process_one_work+0x12a/0x420 [<ffffffffa00920d0>] ? _handle_hotplug_event_func+0x1d0/0x1d0 [acpiphp] [<ffffffff8107141e>] worker_thread+0x12e/0x2f0 [<ffffffff810712f0>] ? manage_workers.isra.26+0x200/0x200 [<ffffffff81075f13>] kthread+0x93/0xa0 [<ffffffff8168d024>] kernel_thread_helper+0x4/0x10 [<ffffffff81075e80>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff8168d020>] ? gs_change+0x13/0x13 Reported-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-28firewire: remove unnecessary alloc/OOM messagesStefan Richter
These are redundant to log messages from the mm core. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-28firewire: sbp2: replace BUG_ON by WARN_ONStefan Richter
No need to crash and burn if S/G element sizes cannot be set to our liking; just leave a message in the log. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-28firewire: core: remove an always false testStefan Richter
struct fw_cdev_allocate_iso_resource.bandwidth is unsigned. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-04-28firewire: Remove two unneeded checks for macrosPaul Bolle
The old IEEE 1394 driver stack was removed in v2.6.37. That made the checks for two Kconfig (module) macros unneeded, since they will now always evaluate to true. Remove these two checks. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-03-28net: add ETH_P_802_3_MINSimon Horman
Add a new constant ETH_P_802_3_MIN, the minimum ethernet type for an 802.3 frame. Frames with a lower value in the ethernet type field are Ethernet II. Also update all the users of this value that David Miller and I could find to use the new constant. Also correct a bug in util.c. The comparison with ETH_P_802_3_MIN should be >= not >. As suggested by Jesse Gross. Compile tested only. Cc: David Miller <davem@davemloft.net> Cc: Jesse Gross <jesse@nicira.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: John W. Linville <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Bart De Schuymer <bart.de.schuymer@pandora.be> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Cc: netfilter-devel@vger.kernel.org Cc: bridge@lists.linux-foundation.org Cc: linux-wireless@vger.kernel.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-media@vger.kernel.org Cc: netdev@vger.kernel.org Cc: dev@openvswitch.org Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>