summaryrefslogtreecommitdiff
path: root/drivers/firmware/arm_scmi
AgeCommit message (Collapse)Author
2023-02-08firmware: arm_scmi: Set fwnode for the scmi_deviceSaravana Kannan
This allows fw_devlink to track and enforce supplier-consumer dependencies for scmi_device. Signed-off-by: Saravana Kannan <saravanak@google.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Colin Foster <colin.foster@in-advantage.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4 Link: https://lore.kernel.org/r/20230207014207.1678715-12-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-03firmware: arm_scmi: Fix virtio channels cleanup on shutdownCristian Marussi
When unloading the SCMI core stack module, configured to use the virtio SCMI transport, LOCKDEP reports the splat down below about unsafe locks dependencies. In order to avoid this possible unsafe locking scenario call upfront virtio_break_device() before getting hold of vioch->lock. ===================================================== WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected 6.1.0-00067-g6b934395ba07-dirty #4 Not tainted ----------------------------------------------------- rmmod/307 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: ffff000080c510e0 (&dev->vqs_list_lock){+.+.}-{3:3}, at: virtio_break_device+0x28/0x68 and this task is already holding: ffff00008288ada0 (&channels[i].lock){-.-.}-{3:3}, at: virtio_chan_free+0x60/0x168 [scmi_module] which would create a new lock dependency: (&channels[i].lock){-.-.}-{3:3} -> (&dev->vqs_list_lock){+.+.}-{3:3} but this new dependency connects a HARDIRQ-irq-safe lock: (&channels[i].lock){-.-.}-{3:3} ... which became HARDIRQ-irq-safe at: lock_acquire+0x128/0x398 _raw_spin_lock_irqsave+0x78/0x140 scmi_vio_complete_cb+0xb4/0x3b8 [scmi_module] vring_interrupt+0x84/0x120 vm_interrupt+0x94/0xe8 __handle_irq_event_percpu+0xb4/0x3d8 handle_irq_event_percpu+0x20/0x68 handle_irq_event+0x50/0xb0 handle_fasteoi_irq+0xac/0x138 generic_handle_domain_irq+0x34/0x50 gic_handle_irq+0xa0/0xd8 call_on_irq_stack+0x2c/0x54 do_interrupt_handler+0x8c/0x90 el1_interrupt+0x40/0x78 el1h_64_irq_handler+0x18/0x28 el1h_64_irq+0x64/0x68 _raw_write_unlock_irq+0x48/0x80 ep_start_scan+0xf0/0x128 do_epoll_wait+0x390/0x858 do_compat_epoll_pwait.part.34+0x1c/0xb8 __arm64_sys_epoll_pwait+0x80/0xd0 invoke_syscall+0x4c/0x110 el0_svc_common.constprop.3+0x98/0x120 do_el0_svc+0x34/0xd0 el0_svc+0x40/0x98 el0t_64_sync_handler+0x98/0xc0 el0t_64_sync+0x170/0x174 to a HARDIRQ-irq-unsafe lock: (&dev->vqs_list_lock){+.+.}-{3:3} ... which became HARDIRQ-irq-unsafe at: ... lock_acquire+0x128/0x398 _raw_spin_lock+0x58/0x70 __vring_new_virtqueue+0x130/0x1c0 vring_create_virtqueue+0xc4/0x2b8 vm_find_vqs+0x20c/0x430 init_vq+0x308/0x390 virtblk_probe+0x114/0x9b0 virtio_dev_probe+0x1a4/0x248 really_probe+0xc8/0x3a8 __driver_probe_device+0x84/0x190 driver_probe_device+0x44/0x110 __driver_attach+0x104/0x1e8 bus_for_each_dev+0x7c/0xd0 driver_attach+0x2c/0x38 bus_add_driver+0x1e4/0x258 driver_register+0x6c/0x128 register_virtio_driver+0x2c/0x48 virtio_blk_init+0x70/0xac do_one_initcall+0x84/0x420 kernel_init_freeable+0x2d0/0x340 kernel_init+0x2c/0x138 ret_from_fork+0x10/0x20 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->vqs_list_lock); local_irq_disable(); lock(&channels[i].lock); lock(&dev->vqs_list_lock); <Interrupt> lock(&channels[i].lock); *** DEADLOCK *** ================ Fixes: 42e90eb53bf3f ("firmware: arm_scmi: Add a virtio channel refcount") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20221222183823.518856-6-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-01-03firmware: arm_scmi: Harden shared memory access in fetch_notificationCristian Marussi
A misbheaving SCMI platform firmware could reply with out-of-spec notifications, shorter than the mimimum size comprising a header. Fixes: d5141f37c42e ("firmware: arm_scmi: Add notifications support in transport layer") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20221222183823.518856-4-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-01-03firmware: arm_scmi: Harden shared memory access in fetch_responseCristian Marussi
A misbheaving SCMI platform firmware could reply with out-of-spec messages, shorter than the mimimum size comprising a header and a status field. Harden shmem_fetch_response to properly truncate such a bad messages. Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20221222183823.518856-3-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-01-03firmware: arm_scmi: Clear stale xfer->hdr.statusCristian Marussi
Stale error status reported from a previous message transaction must be cleared before starting a new transaction to avoid being confusingly reported in the following SCMI message dump traces. Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20221222183823.518856-2-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-11-01firmware: arm_scmi: Fix deferred_tx_wq release on error pathsCristian Marussi
Use devres to allocate the dedicated deferred_tx_wq polling workqueue so as to automatically trigger the proper resource release on error path. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 5a3b7185c47c ("firmware: arm_scmi: Add atomic mode support to virtio transport") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20221028140833.280091-6-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-11-01firmware: arm_scmi: Fix devres allocation device in virtio transportCristian Marussi
SCMI virtio transport device managed allocations must use the main platform device in devres operations instead of the channel devices. Cc: Peter Hilber <peter.hilber@opensynergy.com> Fixes: 46abe13b5e3d ("firmware: arm_scmi: Add virtio transport") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20221028140833.280091-5-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-11-01firmware: arm_scmi: Make Rx chan_setup fail on memory errorsCristian Marussi
SCMI Rx channels are optional and they can fail to be setup when not present but anyway channels setup routines must bail-out on memory errors. Make channels setup, and related probing, fail when memory errors are reported on Rx channels. Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20221028140833.280091-4-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-11-01firmware: arm_scmi: Make tx_prepare time out eventuallyCristian Marussi
SCMI transports based on shared memory, at start of transmissions, have to wait for the shared Tx channel area to be eventually freed by the SCMI platform before accessing the channel. In fact the channel is owned by the SCMI platform until marked as free by the platform itself and, as such, cannot be used by the agent until relinquished. As a consequence a badly misbehaving SCMI platform firmware could lock the channel indefinitely and make the kernel side SCMI stack loop forever waiting for such channel to be freed, possibly hanging the whole boot sequence. Add a timeout to the existent Tx waiting spin-loop so that, when the system ends up in this situation, the SCMI stack can at least bail-out, nosily warn the user, and abort the transmission. Reported-by: YaxiongTian <iambestgod@outlook.com> Suggested-by: YaxiongTian <iambestgod@outlook.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Etienne Carriere <etienne.carriere@linaro.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20221028140833.280091-3-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-11-01firmware: arm_scmi: Suppress the driver's bind attributesCristian Marussi
Suppress the capability to unbind the core SCMI driver since all the SCMI stack protocol drivers depend on it. Fixes: aa4f886f3893 ("firmware: arm_scmi: add basic driver infrastructure for SCMI") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20221028140833.280091-2-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-11-01firmware: arm_scmi: Cleanup the core driver removal callbackCristian Marussi
Platform drivers .remove callbacks are not supposed to fail and report errors. Such errors are indeed ignored by the core platform drivers and the driver unbind process is anyway completed. The SCMI core platform driver as it is now, instead, bails out reporting an error in case of an explicit unbind request. Fix the removal path by adding proper device links between the core SCMI device and the SCMI protocol devices so that a full SCMI stack unbind is triggered when the core driver is removed. The remove process does not bail out anymore on the anomalous conditions triggered by an explicit unbind but the user is still warned. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20221028140833.280091-1-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-09-28Merge tag 'mmc-v6.0-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC fixes. This time there is also a fix for the ARM SCMI firmware driver, which has been acked by Sudeep Holla, the maintainer. MMC core: - Terminate infinite loop in SD-UHS voltage switch MMC host: - hsq: Fix kernel crash in the recovery path - moxart: Fix bus width configurations - sdhci: Fix kernel panic for cqe irq ARM_SCMI: - Fixup clock management by reverting 'firmware: arm_scmi: Add clock management to the SCMI power domain'" * tag 'mmc-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: hsq: Fix data stomping during mmc recovery Revert "firmware: arm_scmi: Add clock management to the SCMI power domain" mmc: core: Terminate infinite loop in SD-UHS voltage switch mmc: moxart: fix 4-bit bus width and remove 8-bit bus width mmc: sdhci: Fix host->cmd is null
2022-09-23Revert "firmware: arm_scmi: Add clock management to the SCMI power domain"Ulf Hansson
This reverts commit a3b884cef873 ("firmware: arm_scmi: Add clock management to the SCMI power domain"). Using the GENPD_FLAG_PM_CLK tells genpd to gate/ungate the consumer device's clock(s) during runtime suspend/resume through the PM clock API. More precisely, in genpd_runtime_resume() the clock(s) for the consumer device would become ungated prior to the driver-level ->runtime_resume() callbacks gets invoked. This behaviour isn't a good fit for all platforms/drivers. For example, a driver may need to make some preparations of its device in its ->runtime_resume() callback, like calling clk_set_rate() before the clock(s) should be ungated. In these cases, it's easier to let the clock(s) to be managed solely by the driver, rather than at the PM domain level. For these reasons, let's drop the use GENPD_FLAG_PM_CLK for the SCMI PM domain, as to enable it to be more easily adopted across ARM platforms. Fixes: a3b884cef873 ("firmware: arm_scmi: Add clock management to the SCMI power domain") Cc: Nicolas Pitre <npitre@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Peng Fan <peng.fan@nxp.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20220919122033.86126-1-ulf.hansson@linaro.org
2022-08-23firmware: arm_scmi: Add SCMI PM driver remove routineCristian Marussi
Currently, when removing the SCMI PM driver not all the resources registered with genpd subsystem are properly de-registered. As a side effect of this after a driver unload/load cycle you get a splat with a few warnings like this: | debugfs: Directory 'BIG_CPU0' with parent 'pm_genpd' already present! | debugfs: Directory 'BIG_CPU1' with parent 'pm_genpd' already present! | debugfs: Directory 'LITTLE_CPU0' with parent 'pm_genpd' already present! | debugfs: Directory 'LITTLE_CPU1' with parent 'pm_genpd' already present! | debugfs: Directory 'LITTLE_CPU2' with parent 'pm_genpd' already present! | debugfs: Directory 'LITTLE_CPU3' with parent 'pm_genpd' already present! | debugfs: Directory 'BIG_SSTOP' with parent 'pm_genpd' already present! | debugfs: Directory 'LITTLE_SSTOP' with parent 'pm_genpd' already present! | debugfs: Directory 'DBGSYS' with parent 'pm_genpd' already present! | debugfs: Directory 'GPUTOP' with parent 'pm_genpd' already present! Add a proper scmi_pm_domain_remove callback to the driver in order to take care of all the needed cleanups not handled by devres framework. Link: https://lore.kernel.org/r/20220817172731.1185305-7-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-08-23firmware: arm_scmi: Fix the asynchronous reset requestsCristian Marussi
SCMI Reset protocol specification allows the asynchronous reset request only when an autonomous reset action is specified. Reset requests based on explicit assert/deassert of signals should not be served asynchronously. Current implementation will instead issue an asynchronous request in any case, as long as the reset domain had advertised to support asynchronous resets. Avoid requesting the asynchronous resets when the reset action is not of the autonomous type, even if the target reset domain does, in general, support the asynchronous requests. Link: https://lore.kernel.org/r/20220817172731.1185305-6-cristian.marussi@arm.com Fixes: 95a15d80aa0d ("firmware: arm_scmi: Add RESET protocol in SCMI v2.0") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-08-23firmware: arm_scmi: Harden accesses to the reset domainsCristian Marussi
Accessing reset domains descriptors by the index upon the SCMI drivers requests through the SCMI reset operations interface can potentially lead to out-of-bound violations if the SCMI driver misbehave. Add an internal consistency check before any such domains descriptors accesses. Link: https://lore.kernel.org/r/20220817172731.1185305-5-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-08-22firmware: arm_scmi: Harden accesses to the sensor domainsCristian Marussi
Accessing sensor domains descriptors by the index upon the SCMI drivers requests through the SCMI sensor operations interface can potentially lead to out-of-bound violations if the SCMI driver misbehave. Add an internal consistency check before any such domains descriptors accesses. Link: https://lore.kernel.org/r/20220817172731.1185305-4-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-08-22firmware: arm_scmi: Improve checks in the info_get operationsCristian Marussi
SCMI protocols abstract and expose a number of protocol specific resources like clocks, sensors and so on. Information about such specific domain resources are generally exposed via an `info_get` protocol operation. Improve the sanity check on these operations where needed. Link: https://lore.kernel.org/r/20220817172731.1185305-3-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-08-22firmware: arm_scmi: Fix missing kernel-doc in opteeCristian Marussi
Add the missing structure field `rx_len` description. Link: https://lore.kernel.org/r/20220817172731.1185305-2-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-08-02Merge tag 'pm-5.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These are mostly minor improvements all over including new CPU IDs for the Intel RAPL driver, an Energy Model rework to use micro-Watt as the power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq updates, documentation cleanups and a new version of the pm-graph suite of utilities. Specifics: - Make cpufreq_show_cpus() more straightforward (Viresh Kumar). - Drop unnecessary CPU hotplug locking from store() used by cpufreq sysfs attributes (Viresh Kumar). - Make the ACPI cpufreq driver support the boost control interface on Zhaoxin/Centaur processors (Tony W Wang-oc). - Print a warning message on attempts to free an active cpufreq policy which should never happen (Viresh Kumar). - Fix grammar in the Kconfig help text for the loongson2 cpufreq driver (Randy Dunlap). - Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq governor (Zhao Liu). - Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll cpuidle driver (Eiichi Tsukata). - Modify intel_idle to treat C1 and C1E as independent idle states on Sapphire Rapids (Artem Bityutskiy). - Extend support for wakeirq to callback wrappers used during system suspend and resume (Ulf Hansson). - Defer waiting for device probe before loading a hibernation image till the first actual device access to avoid possible deadlocks reported by syzbot (Tetsuo Handa). - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn Helgaas). - Add Raptor Lake-P to the list of processors supported by the Intel RAPL driver (George D Sworo). - Add Alder Lake-N and Raptor Lake-P to the list of processors for which Power Limit4 is supported in the Intel RAPL driver (Sumeet Pawnikar). - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before attempting to remove it (Hsin-Yi Wang). - Change the Energy Model code to represent power in micro-Watts and adjust its users accordingly (Lukasz Luba). - Add new devfreq driver for Mediatek CCI (Cache Coherent Interconnect) (Johnson Wang). - Convert the Samsung Exynos SoC Bus bindings to DT schema of exynos-bus.c (Krzysztof Kozlowski). - Address kernel-doc warnings by adding the description for unused function parameters in devfreq core (Mauro Carvalho Chehab). - Use NULL to pass a null pointer rather than zero according to the function propotype in imx-bus.c (Colin Ian King). - Print error message instead of error interger value in tegra30-devfreq.c (Dmitry Osipenko). - Add checks to prevent setting negative frequency QoS limits for CPUs (Shivnandan Kumar). - Update the pm-graph suite of utilities to the latest revision 5.9 including multiple improvements (Todd Brandt). - Drop pme_interrupt reference from the PCI power management documentation (Mario Limonciello)" * tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits) powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P PM: QoS: Add check to make sure CPU freq is non-negative PM: hibernate: defer device probing when resuming from hibernation intel_idle: make SPR C1 and C1E be independent cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask cpufreq: loongson2: fix Kconfig "its" grammar pm-graph v5.9 cpufreq: Warn users while freeing active policy cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1 firmware: arm_scmi: Get detailed power scale from perf Documentation: EM: Switch to micro-Watts scale PM: EM: convert power field to micro-Watts precision and align drivers PM / devfreq: tegra30: Add error message for devm_devfreq_add_device() PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero PM / devfreq: shut up kernel-doc warnings dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver dt-bindings: interconnect: Add MediaTek CCI dt-bindings PM: domains: Ensure genpd_debugfs_dir exists before remove PM: runtime: Extend support for wakeirq for force_suspend|resume ...
2022-07-15firmware: arm_scmi: Get detailed power scale from perfLukasz Luba
In SCMI v3.1 the power scale can be in micro-Watts. The upper layers, e.g. cpufreq and EM should handle received power values properly (upscale when needed). Thus, provide an interface which allows to check what is the scale for power values. The old interface allowed to distinguish between bogo-Watts and milli-Watts only (which was good for older SCMI spec). Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-04firmware: arm_scmi: Use fast channel tracingCristian Marussi
Make use of SCMI fast channel event tracing. Link: https://lore.kernel.org/r/20220704102241.2988447-7-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04firmware: arm_scmi: Add SCMI v3.1 powercap fast channels supportCristian Marussi
Add SCMIv3.1 powercap protocol fast channel support using common helpers provided by the SCMI core with scmi_proto_helpers_ops operations. Link: https://lore.kernel.org/r/20220704102241.2988447-5-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04firmware: arm_scmi: Generalize the fast channel supportCristian Marussi
Generalize existing fast channel support used in the perf protocol and make it available to possibly any protocol refactoring the common code into a couple of new scmi_proto_helpers_ops routines. Make perf protocol use this new infrastructure. No functional change. Link: https://lore.kernel.org/r/20220704102241.2988447-4-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04firmware: arm_scmi: Add SCMI v3.1 powercap protocol basic supportCristian Marussi
Add support for SCMI v3.1 powercap protocol, with the exception of powercap fast channels, exposing all the new related powercap protocol operations as usual in include/linux/scmi_protocol.h. Link: https://lore.kernel.org/r/20220704102241.2988447-3-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04firmware: arm_scmi: Add SCMI System Power Control driverCristian Marussi
Add an SCMI System Power control driver to handle platform's requests carried by SYSTEM_POWER_STATE_NOTIFIER notifications: such platform requested system-wide power state transitions are handled accordingly, gracefully or forcefully, depending on the notifications' message flags. Graceful requests are relayed to userspace using the same Kernel API used to handle ACPI Shutdown bus events. Link: https://lore.kernel.org/r/20220704101933.2981635-5-cristian.marussi@arm.com Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04firmware: arm_scmi: Add devm_protocol_acquire helperCristian Marussi
Add a method to get hold of a protocol, causing it to be initialized and its resource accounting updated, without getting access to its operations and handle. Some protocols, like SCMI SystemPower, do not expose any protocol ops to the kernel OSPM agent but still need to be at least initialized. This helper avoids the need to invoke a full devm_get_protocol() only to get the protocol initialized while throwing away unused the protocol ops and handle. Link: https://lore.kernel.org/r/20220704101933.2981635-4-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04firmware: arm_scmi: Add SCMI v3.1 System Power extensionsCristian Marussi
Add support for SCMIv3.1 System Power optional timeout field while dispatching SYSTEM_POWER_STATE_NOTIFIER notification. Link: https://lore.kernel.org/r/20220704101933.2981635-3-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04firmware: arm_scmi: Support only one single system power deviceCristian Marussi
In order to minimize SCMI platform fw-side complexity, only one single SCMI platform should be in charge of SCMI SystemPower protocol communications with the OSPM. Enforce the existence of one single unique device associated with SystemPower protocol across any possible number of SCMI platforms, and warn if a system tries to register different SystemPower devices from multiple platforms. Link: https://lore.kernel.org/r/20220704101933.2981635-2-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-07-04firmware: arm_scmi: Use new SCMI full message tracingCristian Marussi
Add full message tracing for all transmitted and successfully received SCMI commands, replies and notifications. Link: https://lore.kernel.org/r/20220630173135.2086631-3-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-06-27firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx APIBo Liu
Replace the deprecated ida_simple_{get,remove} with ida_{alloc,free}. Link: https://lore.kernel.org/r/20220616055052.4559-1-liubo03@inspur.com Signed-off-by: Bo Liu <liubo03@inspur.com> [sudeep.holla: Replace ida_alloc_min with ida_alloc as suggested by Cristian] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-06-27firmware: arm_scmi: Fix response size warning for OPTEE transportVincent Guittot
Some protocols check the response size with the expected value but optee shared memory doesn't return such size whereas it is available in the optee output buffer. As an example, the base protocol compares the response size with the expected result when requesting the list of protocol which triggers a warning with optee shared memory: arm-scmi firmware:scmi0: Malformed reply - real_sz:116 calc_sz:4 (loop_num_ret:4) Save the output buffer length and use it when fetching the answer. Link: https://lore.kernel.org/r/20220624074549.3298-1-vincent.guittot@linaro.org Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-06-20firmware: arm_scmi: Relax CLOCK_DESCRIBE_RATES out-of-spec checksCristian Marussi
A reply to CLOCK_DESCRIBE_RATES issued against a non rate-discrete clock should be composed of a triplet of rates descriptors (min/max/step) returned all in one reply message. This is not always the case when dealing with some SCMI server deployed in the wild: relax such constraint while maintaining memory safety by checking carefully the returned payload size. While at that cleanup a stale debug printout. Link: https://lore.kernel.org/r/20220616170347.2800771-1-cristian.marussi@arm.com Fixes: 7bc7caafe6b1 ("firmware: arm_scmi: Use common iterators in the clock protocol") Tested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-06-12firmware: arm_scmi: Fix incorrect error propagation in ↵Ludvig Pärsson
scmi_voltage_descriptors_get scmi_voltage_descriptors_get() will incorrecly return an error code if the last iteration of the for loop that retrieves the descriptors is skipped due to an error. Skipping an iteration in the loop is not an error, but the `ret` value from the last iteration will be propagated when the function returns. Fix by not saving return values that should not be propagated. This solution also minimizes the risk of future patches accidentally re-introducing this bug. Link: https://lore.kernel.org/r/20220610140055.31491-1-ludvig.parsson@axis.com Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Ludvig Pärsson <ludvig.parsson@axis.com> [sudeep.holla: Removed unneeded reset_rx_to_maxsz and check for return value from scmi_voltage_levels_get as suggested by Cristian] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-06-10firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessaryCristian Marussi
Commit b260fccaebdc2 ("firmware: arm_scmi: Add SCMI v3.1 protocol extended names support") moved all the name string buffers to use the extended buffer size of 64 instead of the required 16 bytes. While that should be fine if the firmware terminates the string before 16 bytes, there is possibility of copying random data if the name is not NULL terminated by the firmware. SCMI base protocol agent_name/vendor_id/sub_vendor_id are defined by the specification as NULL-terminated ASCII strings up to 16-bytes in length. The underlying buffers and message descriptors are currently bigger than needed; resize them to fit only the strictly needed 16 bytes to avoid any possible leaks when reading data from the firmware. Change the size argument of strlcpy to use SCMI_SHORT_NAME_MAX_SIZE always when dealing with short domain names, so as to limit the possibility that an ill-formed non-NULL terminated short reply from the SCMI platform firmware can leak stale content laying in the underlying transport shared memory area. While at that, convert all strings handling routines to use the preferred strscpy. Link: https://lore.kernel.org/r/20220608095530.497879-1-cristian.marussi@arm.com Fixes: b260fccaebdc2 ("firmware: arm_scmi: Add SCMI v3.1 protocol extended names support") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-06-10firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupportedCristian Marussi
Avoid to invoke SENSOR_AXIS_NAME_GET on sensors that have not declared at least one of their axes as supporting extended names. Since the returned list of axes supporting extended names is not necessarily comprising all the existing axes of the specified sensor, take care also to properly pick the axis descriptor from the ID embedded in the response. Link: https://lore.kernel.org/r/20220608164051.2326087-1-cristian.marussi@arm.com Fixes: 802b0bed011e ("firmware: arm_scmi: Add SCMI v3.1 SENSOR_AXIS_NAME_GET support") Cc: Peter Hilber <peter.hilber@opensynergy.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Peter Hilber <peter.hilber@opensynergy.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-06-06firmware: arm_scmi: Remove all the unused local variablesCristian Marussi
While using SCMI iterators helpers a few local automatic variables are defined but then used only as input for sizeof operators. cppcheck is fooled to complain about this with: | drivers/firmware/arm_scmi/sensors.c:341:48: warning: Variable 'msg' is | not assigned a value. [unassignedVariable] | struct scmi_msg_sensor_list_update_intervals *msg; Even though this is an innocuos warning, since the uninitialized variable is at the end never used in the reported cases, fix these occurences all over SCMI stack to avoid keeping unneeded objects on the stack. Link: https://lore.kernel.org/r/20220530115237.277077-1-cristian.marussi@arm.com Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-06-06firmware: arm_scmi: Relax base protocol sanity checks on the protocol listCristian Marussi
Even though malformed replies from firmware must be treated carefully to avoid memory corruption in the kernel, some out-of-spec SCMI replies can be tolerated to avoid breaking existing deployed system, as long as they won't cause memory issues. Relax the sanity checks on the recieved protocol list in the base protocol to avoid breaking one of the deployed platform whose firmware is not easily upgradable currently. Link: https://lore.kernel.org/r/20220523171559.472112-1-cristian.marussi@arm.com Cc: Etienne Carriere <etienne.carriere@linaro.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Reported-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Tested-By: Frank Wunderlich <frank-w@public-files.de> Acked-by: Michael Riesch <michael.riesch@wolfvision.net> Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-05-03firmware: arm_scmi: Fix late checks on pointer dereferenceCristian Marussi
A few dereferences could happen before the iterator pointer argument was checked for NULL, causing the following smatch warnings: drivers/firmware/arm_scmi/driver.c:1214 scmi_iterator_run() warn: variable dereferenced before check 'i' (see line 1210) Fix by moving the checks early and dropping some unneeded local references. No functional change. Link: https://lore.kernel.org/r/20220503121047.3590340-1-cristian.marussi@arm.com Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-04-28firmware: arm_scmi: Support optee shared memory in the optee transportEtienne Carriere
Add support for TEE shared memory in optee scmi transport. When using tee shared memory, scmi optee transport manages SCMI messages using msg protocol(from msg.c) in shared memory, whereas smt(from shmem.c) protocol is used with static IOMEM based shared buffers. Link: https://lore.kernel.org/r/20220425085127.2009-1-etienne.carriere@linaro.org Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-04-28firmware: arm_scmi: Add SCMI v3.1 VOLTAGE_LEVEL_SET_COMPLETECristian Marussi
Add SCMI v3.1 voltage protocol support for asynchronous VOLTAGE_LEVEL_SET command. Note that, if a voltage domain is advertised to support the asynchronous version of VOLTAGE_LEVEL_SET, the command will be issued asynchronously unless explicitly requested to use the synchronous version by setting the mode to SCMI_VOLTAGE_LEVEL_SET_SYNC when calling voltage_ops->level_set. The SCMI regulator driver level_set invocation has been left unchanged so that it will transparently use the asynchronous version if available. Link: https://lore.kernel.org/r/20220330150551.2573938-21-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-04-28firmware: arm_scmi: Add SCMI v3.1 clock notificationsCristian Marussi
Add SCMI v3.1 clock pre and post notifications. Link: https://lore.kernel.org/r/20220330150551.2573938-20-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-04-28firmware: arm_scmi: Add checks for min/max limits in PERFORMANCE_LIMITS_SETCristian Marussi
Starting with SCMI v3.1, the PERFORMANCE_LIMITS_SET command allows a user to request only one between max and min ranges to be changed, while leaving the other untouched if set to zero in the request. Anyway SCMI v3.1 states also explicitly that you cannot leave both of those unchanged (zeroed) when issuing such command, so add a proper check for this condition. Link: https://lore.kernel.org/r/20220330150551.2573938-23-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> [sudeep.holla: Dropped check for v3.0 and above to make the check unconditional, updated the subject accordingly] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-04-28firmware: arm_scmi: Add SCMI v3.1 perf power-cost in microwattsCristian Marussi
Add SCMI v3.1 internal support for parsing message attributes reporting the capability of a performance domain to report power-cost in microwatts. Link: https://lore.kernel.org/r/20220330150551.2573938-22-cristian.marussi@arm.com Cc: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-04-28firmware: arm_scmi: Use common iterators in the perf protocolCristian Marussi
Make SCMI perf protocol use the common iterator protocol helpers for issuing the multi-part commands. Link: https://lore.kernel.org/r/20220330150551.2573938-19-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-04-28firmware: arm_scmi: Use common iterators in the voltage protocolCristian Marussi
Make SCMI voltage protocol use the common iterator protocol helpers for issuing the multi-part commands. Link: https://lore.kernel.org/r/20220330150551.2573938-18-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-04-28firmware: arm_scmi: Use common iterators in the clock protocolCristian Marussi
Make SCMI clock protocol use the common iterator protocol helpers for issuing the multi-part commands. Link: https://lore.kernel.org/r/20220330150551.2573938-17-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-04-28firmware: arm_scmi: Add SCMI v3.1 SENSOR_AXIS_NAME_GET supportCristian Marussi
Add support for SCMI v3.1 SENSOR_AXIS_NAME_GET multi-part command using the common iterator protocol helpers. Link: https://lore.kernel.org/r/20220330150551.2573938-16-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-04-28firmware: arm_scmi: Use common iterators in the sensor protocolCristian Marussi
Make SCMI sensor protocol use the common iterator protocol helpers for issuing the multi-part commands. Link: https://lore.kernel.org/r/20220330150551.2573938-15-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-04-28firmware: arm_scmi: Add iterators for multi-part commandsCristian Marussi
SCMI specification defines some commands as optionally issued over multiple messages in order to overcome possible limitations in payload size enforced by the configured underlyinng transport. Introduce some common protocol helpers to provide a unified solution for issuing such SCMI multi-part commands. Link: https://lore.kernel.org/r/20220330150551.2573938-14-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
generated by cgit (git 2.34.1) at 2025-06-03 07:09:25 +0000