summaryrefslogtreecommitdiff
path: root/drivers/firmware/iscsi_ibft_find.c
AgeCommit message (Collapse)Author
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 287Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license v2 0 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 23 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.115786599@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12iscsi_ibft: use virt_to_phys instead of isa_virt_to_busChristoph Hellwig
As far as I can tell IBFT is a firmware table and has nothing to do with the good old ISA bus. And even if it the two would be the same on x86 anyway. So remove the isa_virt_to_bus call in preparation of eventually removing that API entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-30efi: Make 'efi_enabled' a function to query EFI facilitiesMatt Fleming
Originally 'efi_enabled' indicated whether a kernel was booted from EFI firmware. Over time its semantics have changed, and it now indicates whether or not we are booted on an EFI machine with bit-native firmware, e.g. 64-bit kernel with 64-bit firmware. The immediate motivation for this patch is the bug report at, https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 which details how running a platform driver on an EFI machine that is designed to run under BIOS can cause the machine to become bricked. Also, the following report, https://bugzilla.kernel.org/show_bug.cgi?id=47121 details how running said driver can also cause Machine Check Exceptions. Drivers need a new means of detecting whether they're running on an EFI machine, as sadly the expression, if (!efi_enabled) hasn't been a sufficient condition for quite some time. Users actually want to query 'efi_enabled' for different reasons - what they really want access to is the list of available EFI facilities. For instance, the x86 reboot code needs to know whether it can invoke the ResetSystem() function provided by the EFI runtime services, while the ACPI OSL code wants to know whether the EFI config tables were mapped successfully. There are also checks in some of the platform driver code to simply see if they're running on an EFI machine (which would make it a bad idea to do BIOS-y things). This patch is a prereq for the samsung-laptop fix patch. Cc: David Airlie <airlied@linux.ie> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Olof Johansson <olof@lixom.net> Cc: Peter Jones <pjones@redhat.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Steve Langasek <steve.langasek@canonical.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Konrad Rzeszutek Wilk <konrad@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-13ibft: Fix finding IBFT ACPI table on UEFIYinghai Lu
Found one system with UEFI/iBFT, kernel does not detect the iBFT during iscsi_ibft module loading. Root cause: on x86 (UEFI), we are calling of find_ibft_region() much earlier - specifically in setup_arch() before ACPI is enabled. Try to split acpi checking code out and call that later At that time ACPI iBFT already get permanent mapped with ioremap. So isa_virt_to_bus() will get wrong phys from right virt address. We could just skip that phys address printing. For legacy one, print the found address early. -v2: update comments and description according to Konrad. -v3: fix problem about module use case that is found by Konrad. -v4: use acpi_get_table() instead of acpi_table_parse() to handle module use case that is found by Konrad again.. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2011-06-09iscsi_ibft: iscsi_ibft_find unused variable iConnor Hansen
int i is only needed if CONFIG_ACPI is set so move it within a new ifdef so kernels without ACPI don't allocate space for nothing. Fixes warning too. Signed-off-by: Connor Hansen <cmdkhh@gmail.com> Signed-off-by: Peter Jones <pjones@redhat.com> [v2: Fixed warning when CONFIG_ACPI was defined] Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2011-04-14iscsi_ibft: search for broadcom specific ibft sign (v2)Mike Christie
Broadcom iscsi offload firmware uses a non standard ibft sign of "BIFT". When we added support for boot, the anaconda team and I were using older firmware (I guess 4 years old), so boot does not work on current cards. This patch modifies the ibft search code to search for "BIFT" along with the other possible values. Broadcom has tested the patch and reported it works with their firmware. Mike has tested Chelsio and Intel cards. [v2: - Add ACPI_SIG_IBFT to ibft_signs - replace break with goto in find_ibft_in_mem innner loop.] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2010-05-12ibft: Use IBFT_SIGN instead of open-coding the search string.Peter Jones
We define IBFT_SIGN to "iBFT"; may as well use it. Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org> Signed-off-by: Peter Jones <pjones@redhat.com>
2010-05-11ibft: For UEFI machines actually do scan ACPI for iBFT.Konrad Rzeszutek Wilk
For machines with IBFT 1.03 do scan the ACPI table for 'iBFT' or for 'IBFT'. If the machine is in UEFI mode, only do the ACPI table scan. For all other machines (pre IBFT 1.03) do a memory scan if not found in the ACPI tables. Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org> Tested-by: Mike Christie <michaelc@cs.wisc.edu>
2010-05-11ibft: Update iBFT handling for v1.03 of the spec.Peter Jones
- Use struct acpi_table_ibft instead of struct ibft_table_header - Don't do reserve_ibft_region() on UEFI machines (section 1.4.3.1) - If ibft_addr isn't initialized when ibft_init() is called, check for ACPI-based tables. - Fix compiler error when CONFIG_ACPI is not defined. Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
2010-04-07Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip: x86: Fix double enable_IR_x2apic() call on SMP kernel on !SMP boards x86: Increase CONFIG_NODES_SHIFT max to 10 ibft, x86: Change reserve_ibft_region() to find_ibft_region() x86, hpet: Fix bug in RTC emulation x86, hpet: Erratum workaround for read after write of HPET comparator bootmem, x86: Fix 32bit numa system without RAM on node 0 nobootmem, x86: Fix 32bit numa system without RAM on node 0 x86: Handle overlapping mptables x86: Make e820_remove_range to handle all covered case x86-32, resume: do a global tlb flush in S4 resume
2010-04-01ibft, x86: Change reserve_ibft_region() to find_ibft_region()Yinghai Lu
This allows arch code could decide the way to reserve the ibft. And we should reserve ibft as early as possible, instead of BOOTMEM stage, in case the table is in RAM range and is not reserved by BIOS (this will often be the case.) Move to just after find_smp_config(). Also when CONFIG_NO_BOOTMEM=y, We will not have reserve_bootmem() anymore. -v2: fix typo about ibft pointed by Konrad Rzeszutek Wilk <konrad@darnok.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4BB510FB.80601@kernel.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Jones <pjones@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad@kernel.org> CC: Jan Beulich <jbeulich@novell.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-10-05iSCSI/iBFT: use proper address translationJan Beulich
In virtual environments (namely, Xen Dom0) virt <-> phys and virt <-> isa-bus translations cannot be freely interchanged (and even outside such environments it is not really correct to do so). When looking at memory below 1M, the latter translations should always be used. iscsi_ibft_find.c part from: Martin Wilck <martin.wilck@ts.fujitsu.com>. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <ketuzsezs@darnok.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-30iscsi_ibft_find: fix modpost warningJan Beulich
Exporting __init functions is wrong. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Konrad Rzeszutek <konradr@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28drivers: fix integer as NULL pointer warningsHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-19Firmware: add iSCSI iBFT SupportKonrad Rzeszutek
Add /sysfs/firmware/ibft/[initiator|targetX|ethernetX] directories along with text properties which export the the iSCSI Boot Firmware Table (iBFT) structure. What is iSCSI Boot Firmware Table? It is a mechanism for the iSCSI tools to extract from the machine NICs the iSCSI connection information so that they can automagically mount the iSCSI share/target. Currently the iSCSI information is hard-coded in the initrd. The /sysfs entries are read-only one-name-and-value fields. The usual set of data exposed is: # for a in `find /sys/firmware/ibft/ -type f -print`; do echo -n "$a: "; cat $a; done /sys/firmware/ibft/target0/target-name: iqn.2007.com.intel-sbx44:storage-10gb /sys/firmware/ibft/target0/nic-assoc: 0 /sys/firmware/ibft/target0/chap-type: 0 /sys/firmware/ibft/target0/lun: 00000000 /sys/firmware/ibft/target0/port: 3260 /sys/firmware/ibft/target0/ip-addr: 192.168.79.116 /sys/firmware/ibft/target0/flags: 3 /sys/firmware/ibft/target0/index: 0 /sys/firmware/ibft/ethernet0/mac: 00:11:25:9d:8b:01 /sys/firmware/ibft/ethernet0/vlan: 0 /sys/firmware/ibft/ethernet0/gateway: 192.168.79.254 /sys/firmware/ibft/ethernet0/origin: 0 /sys/firmware/ibft/ethernet0/subnet-mask: 255.255.252.0 /sys/firmware/ibft/ethernet0/ip-addr: 192.168.77.41 /sys/firmware/ibft/ethernet0/flags: 7 /sys/firmware/ibft/ethernet0/index: 0 /sys/firmware/ibft/initiator/initiator-name: iqn.2007-07.com:konrad.initiator /sys/firmware/ibft/initiator/flags: 3 /sys/firmware/ibft/initiator/index: 0 For full details of the IBFT structure please take a look at: ftp://ftp.software.ibm.com/systems/support/system_x_pdf/ibm_iscsi_boot_firmware_table_v1.02.pdf [akpm@linux-foundation.org: fix build] Signed-off-by: Konrad Rzeszutek <konradr@linux.vnet.ibm.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Peter Jones <pjones@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>