summaryrefslogtreecommitdiff
path: root/drivers/firmware
AgeCommit message (Collapse)Author
2016-10-19efi/arm: Fix absolute relocation detection for older toolchainsArd Biesheuvel
When building the ARM kernel with CONFIG_EFI=y, the following build error may occur when using a less recent version of binutils (2.23 or older): STUBCPY drivers/firmware/efi/libstub/lib-sort.stub.o 00000000 R_ARM_ABS32 sort 00000004 R_ARM_ABS32 __ksymtab_strings drivers/firmware/efi/libstub/lib-sort.stub.o: absolute symbol references not allowed in the EFI stub (and when building with debug symbols, the list above is much longer, and contains all the internal references between the .debug sections and the actual code) This issue is caused by the fact that objcopy v2.23 or earlier does not support wildcards in its -R and -j options, which means the following line from the Makefile: STUBCOPY_FLAGS-y := -R .debug* -R *ksymtab* -R *kcrctab* fails to take effect, leaving harmless absolute relocations in the binary that are indistinguishable from relocations that may cause crashes at runtime due to the fact that these relocations are resolved at link time using the virtual address of the kernel, which is always different from the address at which the EFI firmware loads and invokes the stub. So, as a workaround, disable debug symbols explicitly when building the stub for ARM, and strip the ksymtab and kcrctab symbols for the only exported symbol we currently reuse in the stub, which is 'sort'. Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1476805991-7160-2-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-07Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, including a couple of newly added drivers: - The Qualcomm external bus interface 2 (EBI2), used in some of their mobile phone chips for connecting flash memory, LCD displays or other peripherals - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for the EFUSE based on that firmware interface. - Perf support for the AppliedMicro X-Gene performance monitor unit - Reset driver for STMicroelectronics STM32 - Reset driver for SocioNext UniPhier SoCs Aside from these, there are minor updates to SoC-specific bus, clocksource, firmware, pinctrl, reset, rtc and pmic drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) bus: qcom-ebi2: depend on HAS_IOMEM pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181 clk: mvebu: Add clk support for the orion5x SoC mv88f5181 dt-bindings: EXYNOS: Add Exynos5433 PMU compatible clocksource: exynos_mct: Add the support for ARM64 perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver Documentation: Add documentation for APM X-Gene SoC PMU DTS binding MAINTAINERS: Add entry for APM X-Gene SoC PMU driver bus: qcom: add EBI2 driver bus: qcom: add EBI2 device tree bindings rtc: rtc-pm8xxx: Add support for pm8018 rtc nvmem: amlogic: Add Amlogic Meson EFUSE driver firmware: Amlogic: Add secure monitor driver soc: qcom: smd: Reset rx tail rather than tx memory: atmel-sdramc: fix a possible NULL dereference reset: hi6220: allow to compile test driver on other architectures reset: zynq: add driver Kconfig option reset: sunxi: add driver Kconfig option reset: stm32: add driver Kconfig option reset: socfpga: add driver Kconfig option ...
2016-10-06Merge tag 'pstore-v4.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore updates from Kees Cook: - Fix bug in module unloading - Switch to always using spinlock over cmpxchg - Explicitly define pstore backend's supported modes - Remove bounce buffer from pmsg - Switch to using memcpy_to/fromio() - Error checking improvements * tag 'pstore-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: ramoops: move spin_lock_init after kmalloc error checking pstore/ram: Use memcpy_fromio() to save old buffer pstore/ram: Use memcpy_toio instead of memcpy pstore/pmsg: drop bounce buffer pstore/ram: Set pstore flags dynamically pstore: Split pstore fragile flags pstore/core: drop cmpxchg based updates pstore/ramoops: fixup driver removal
2016-10-03Merge branch 'efi-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "Main changes in this cycle were: - Refactor the EFI memory map code into architecture neutral files and allow drivers to permanently reserve EFI boot services regions on x86, as well as ARM/arm64. (Matt Fleming) - Add ARM support for the EFI ESRT driver. (Ard Biesheuvel) - Make the EFI runtime services and efivar API interruptible by swapping spinlocks for semaphores. (Sylvain Chouleur) - Provide the EFI identity mapping for kexec which allows kexec to work on SGI/UV platforms with requiring the "noefi" kernel command line parameter. (Alex Thorlton) - Add debugfs node to dump EFI page tables on arm64. (Ard Biesheuvel) - Merge the EFI test driver being carried out of tree until now in the FWTS project. (Ivan Hu) - Expand the list of flags for classifying EFI regions as "RAM" on arm64 so we align with the UEFI spec. (Ard Biesheuvel) - Optimise out the EFI mixed mode if it's unsupported (CONFIG_X86_32) or disabled (CONFIG_EFI_MIXED=n) and switch the early EFI boot services function table for direct calls, alleviating us from having to maintain the custom function table. (Lukas Wunner) - Miscellaneous cleanups and fixes" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) x86/efi: Round EFI memmap reservations to EFI_PAGE_SIZE x86/efi: Allow invocation of arbitrary boot services x86/efi: Optimize away setup_gop32/64 if unused x86/efi: Use kmalloc_array() in efi_call_phys_prolog() efi/arm64: Treat regions with WT/WC set but WB cleared as memory efi: Add efi_test driver for exporting UEFI runtime service interfaces x86/efi: Defer efi_esrt_init until after memblock_x86_fill efi/arm64: Add debugfs node to dump UEFI runtime page tables x86/efi: Remove unused find_bits() function fs/efivarfs: Fix double kfree() in error path x86/efi: Map in physical addresses in efi_map_region_fixed lib/ucs2_string: Speed up ucs2_utf8size() firmware-gsmi: Delete an unnecessary check before the function call "dma_pool_destroy" x86/efi: Initialize status to ensure garbage is not returned on small size efi: Replace runtime services spinlock with semaphore efi: Don't use spinlocks for efi vars efi: Use a file local lock for efivars efi/arm*: esrt: Add missing call to efi_esrt_init() efi/esrt: Use memremap not ioremap to access ESRT table in memory x86/efi-bgrt: Use efi_mem_reserve() to avoid copying image data ...
2016-10-03Merge branch 'core-smp-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core SMP updates from Ingo Molnar: "Two main change is generic vCPU pinning and physical CPU SMP-call support, for Xen to be able to perform certain calls on specific physical CPUs - by Juergen Gross" * 'core-smp-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp: Allocate smp_call_on_cpu() workqueue on stack too hwmon: Use smp_call_on_cpu() for dell-smm i8k dcdbas: Make use of smp_call_on_cpu() xen: Add xen_pin_vcpu() to support calling functions on a dedicated pCPU smp: Add function to execute a function synchronously on a CPU virt, sched: Add generic vCPU pinning support xen: Sync xen header
2016-09-20Merge tag 'efi-next' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into efi/core Pull EFI fix from Matt Fleming: * Fix a boot crash reported by Mike Galbraith and Mike Krinkin. The new EFI memory map reservation code didn't align reservations to EFI_PAGE_SIZE boundaries causing bogus regions to be inserted into the global EFI memory map (Matt Fleming) Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-20Merge branch 'efi/urgent' into efi/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-20x86/efi: Round EFI memmap reservations to EFI_PAGE_SIZEMatt Fleming
Mike Galbraith reported that his machine started rebooting during boot after, commit 8e80632fb23f ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()") The ESRT table on his machine is 56 bytes and at no point in the efi_arch_mem_reserve() call path is that size rounded up to EFI_PAGE_SIZE, nor is the start address on an EFI_PAGE_SIZE boundary. Since the EFI memory map only deals with whole pages, inserting an EFI memory region with 56 bytes results in a new entry covering zero pages, and completely screws up the calculations for the old regions that were trimmed. Round all sizes upwards, and start addresses downwards, to the nearest EFI_PAGE_SIZE boundary. Additionally, efi_memmap_insert() expects the mem::range::end value to be one less than the end address for the region. Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com> Reported-by: Mike Krinkin <krinkin.m.u@gmail.com> Tested-by: Mike Krinkin <krinkin.m.u@gmail.com> Cc: Peter Jones <pjones@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-15Merge tag 'qcom-drivers-for-4.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers Pull "Qualcomm ARM Based Driver Updates for v4.9" from Andy Gross: * Silence smem probe defer messages * Make scm explicitly non-modular * Assorted SMD bug fixes and minor changes * Add PM8018 RTC support * tag 'qcom-drivers-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: rtc: rtc-pm8xxx: Add support for pm8018 rtc soc: qcom: smd: Reset rx tail rather than tx soc: qcom: smd: Represent smd edges as devices soc: qcom: smd: Request irqs after parsing properties soc: qcom: smd: Simplify multi channel handling soc: qcom: smd: Correct compile stub prototypes firmware: qcom_scm: make it explicitly non-modular soc: qcom: smem: Silence probe defer error
2016-09-15Merge tag 'amlogic-drivers' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/drivers Pull "Amlogic drivers for v4.9" from Kevin Hilman: - add secure monitor and eFuse driver - add IR remote driver * tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: nvmem: amlogic: Add Amlogic Meson EFUSE driver firmware: Amlogic: Add secure monitor driver media: rc: meson-ir: Add support for newer versions of the IR decoder
2016-09-13Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "This contains a Xen fix, an arm64 fix and a race condition / robustization set of fixes related to ExitBootServices() usage and boundary conditions" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Use efi_exit_boot_services() efi/libstub: Use efi_exit_boot_services() in FDT efi/libstub: Introduce ExitBootServices helper efi/libstub: Allocate headspace in efi_get_memory_map() efi: Fix handling error value in fdt_find_uefi_params efi: Make for_each_efi_memory_desc_in_map() cope with running on Xen
2016-09-13Merge tag 'efi-next' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into efi/core Pull EFI updates from Matt Fleming: "* Refactor the EFI memory map code into architecture neutral files and allow drivers to permanently reserve EFI boot services regions on x86, as well as ARM/arm64 - Matt Fleming * Add ARM support for the EFI esrt driver - Ard Biesheuvel * Make the EFI runtime services and efivar API interruptible by swapping spinlocks for semaphores - Sylvain Chouleur * Provide the EFI identity mapping for kexec which allows kexec to work on SGI/UV platforms with requiring the "noefi" kernel command line parameter - Alex Thorlton * Add debugfs node to dump EFI page tables on arm64 - Ard Biesheuvel * Merge the EFI test driver being carried out of tree until now in the FWTS project - Ivan Hu * Expand the list of flags for classifying EFI regions as "RAM" on arm64 so we align with the UEFI spec - Ard Biesheuvel * Optimise out the EFI mixed mode if it's unsupported (CONFIG_X86_32) or disabled (CONFIG_EFI_MIXED=n) and switch the early EFI boot services function table for direct calls, alleviating us from having to maintain the custom function table - Lukas Wunner * Miscellaneous cleanups and fixes" Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-09efi/arm64: Treat regions with WT/WC set but WB cleared as memoryArd Biesheuvel
Currently, memory regions are only recorded in the memblock memory table if they have the EFI_MEMORY_WB memory type attribute set. In case the region is of a reserved type, it is also marked as MEMBLOCK_NOMAP, which will leave it out of the linear mapping. However, memory regions may legally have the EFI_MEMORY_WT or EFI_MEMORY_WC attributes set, and the EFI_MEMORY_WB cleared, in which case the region in question is obviously backed by normal memory, but is not recorded in the memblock memory table at all. Since it would be useful to be able to identify any UEFI reported memory region using memblock_is_memory(), it makes sense to add all memory to the memblock memory table, and simply mark it as MEMBLOCK_NOMAP if it lacks the EFI_MEMORY_WB attribute. While implementing this, let's refactor the code slightly to make it easier to understand: replace is_normal_ram() with is_memory(), and make it return true for each region that has any of the WB|WT|WC bits set. (This follows the AArch64 bindings in the UEFI spec, which state that those are the attributes that map to normal memory) Also, replace is_reserve_region() with is_usable_memory(), and only invoke it if the region in question was identified as memory by is_memory() in the first place. The net result is the same (only reserved regions that are backed by memory end up in the memblock memory table with the MEMBLOCK_NOMAP flag set) but carried out in a more straightforward way. Finally, we remove the trailing asterisk in the EFI debug output. Keeping it clutters the code, and it serves no real purpose now that we no longer temporarily reserve BootServices code and data regions like we did in the early days of EFI support on arm64 Linux (which it inherited from the x86 implementation) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> Tested-by: James Morse <james.morse@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi: Add efi_test driver for exporting UEFI runtime service interfacesIvan Hu
This driver is used by the Firmware Test Suite (FWTS) for testing the UEFI runtime interfaces readiness of the firmware. This driver exports UEFI runtime service interfaces into userspace, which allows to use and test UEFI runtime services provided by the firmware. This driver uses the efi.<service> function pointers directly instead of going through the efivar API to allow for direct testing of the UEFI runtime service interfaces provided by the firmware. Details for FWTS are available from, <https://wiki.ubuntu.com/FirmwareTestSuite> Signed-off-by: Ivan Hu <ivan.hu@canonical.com> Cc: joeyli <jlee@suse.com> Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi/arm64: Add debugfs node to dump UEFI runtime page tablesArd Biesheuvel
Register the debugfs node 'efi_page_tables' to allow the UEFI runtime page tables to be inspected. Note that ARM does not have 'asm/ptdump.h' [yet] so for now, this is arm64 only. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09firmware-gsmi: Delete an unnecessary check before the function call ↵Markus Elfring
"dma_pool_destroy" The dma_pool_destroy() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Mike Waychison <mikew@google.com> Cc: Michel Lespinasse <walken@google.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi: Replace runtime services spinlock with semaphoreArd Biesheuvel
The purpose of the efi_runtime_lock is to prevent concurrent calls into the firmware. There is no need to use spinlocks here, as long as we ensure that runtime service invocations from an atomic context (i.e., EFI pstore) cannot block. So use a semaphore instead, and use down_trylock() in the nonblocking case. We don't use a mutex here because the mutex_trylock() function must not be called from interrupt context, whereas the down_trylock() can. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Sylvain Chouleur <sylvain.chouleur@gmail.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi: Don't use spinlocks for efi varsSylvain Chouleur
All efivars operations are protected by a spinlock which prevents interruptions and preemption. This is too restricted, we just need a lock preventing concurrency. The idea is to use a semaphore of count 1 and to have two ways of locking, depending on the context: - In interrupt context, we call down_trylock(), if it fails we return an error - In normal context, we call down_interruptible() We don't use a mutex here because the mutex_trylock() function must not be called from interrupt context, whereas the down_trylock() can. Signed-off-by: Sylvain Chouleur <sylvain.chouleur@intel.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Sylvain Chouleur <sylvain.chouleur@gmail.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi: Use a file local lock for efivarsSylvain Chouleur
This patch replaces the spinlock in the efivars struct with a single lock for the whole vars.c file. The goal of this lock is to protect concurrent calls to efi variable services, registering and unregistering. This allows us to register new efivars operations without having in-progress call. Signed-off-by: Sylvain Chouleur <sylvain.chouleur@intel.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Sylvain Chouleur <sylvain.chouleur@gmail.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi/arm*: esrt: Add missing call to efi_esrt_init()Ard Biesheuvel
ESRT support is built by default for all architectures that define CONFIG_EFI. However, this support was not wired up yet for ARM/arm64, since efi_esrt_init() was never called. So add the missing call. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Jones <pjones@redhat.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi/esrt: Use memremap not ioremap to access ESRT table in memoryArd Biesheuvel
On ARM and arm64, ioremap() and memremap() are not interchangeable like on x86, and the use of ioremap() on ordinary RAM is typically flagged as an error if the memory region being mapped is also covered by the linear mapping, since that would lead to aliases with conflicting cacheability attributes. Since what we are dealing with is not an I/O region with side effects, using ioremap() here is arguably incorrect anyway, so let's replace it with memremap() instead. Acked-by: Peter Jones <pjones@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()Matt Fleming
We can use the new efi_mem_reserve() API to mark the ESRT table as reserved forever and save ourselves the trouble of copying the data out into a kmalloc buffer. The added advantage is that now the ESRT driver will work across kexec reboot. Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Jones <pjones@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi/runtime-map: Use efi.memmap directly instead of a copyMatt Fleming
Now that efi.memmap is available all of the time there's no need to allocate and build a separate copy of the EFI memory map. Furthermore, efi.memmap contains boot services regions but only those regions that have been reserved via efi_mem_reserve(). Using efi.memmap allows us to pass boot services across kexec reboot so that the ESRT and BGRT drivers will now work. Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Jones <pjones@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi: Allow drivers to reserve boot services foreverMatt Fleming
Today, it is not possible for drivers to reserve EFI boot services for access after efi_free_boot_services() has been called on x86. For ARM/arm64 it can be done simply by calling memblock_reserve(). Having this ability for all three architectures is desirable for a couple of reasons, 1) It saves drivers copying data out of those regions 2) kexec reboot can now make use of things like ESRT Instead of using the standard memblock_reserve() which is insufficient to reserve the region on x86 (see efi_reserve_boot_services()), a new API is introduced in this patch; efi_mem_reserve(). efi.memmap now always represents which EFI memory regions are available. On x86 the EFI boot services regions that have not been reserved via efi_mem_reserve() will be removed from efi.memmap during efi_free_boot_services(). This has implications for kexec, since it is not possible for a newly kexec'd kernel to access the same boot services regions that the initial boot kernel had access to unless they are reserved by every kexec kernel in the chain. Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Jones <pjones@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi: Add efi_memmap_install() for installing new EFI memory mapsMatt Fleming
While efi_memmap_init_{early,late}() exist for architecture code to install memory maps from firmware data and for the virtual memory regions respectively, drivers don't care which stage of the boot we're at and just want to swap the existing memmap for a modified one. efi_memmap_install() abstracts the details of how the new memory map should be mapped and the existing one unmapped. Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Jones <pjones@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi: Split out EFI memory map functions into new fileMatt Fleming
Also move the functions from the EFI fake mem driver since future patches will require access to the memmap insertion code even if CONFIG_EFI_FAKE_MEM isn't enabled. This will be useful when we need to build custom EFI memory maps to allow drivers to mark regions as reserved. Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Jones <pjones@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi/fake_mem: Refactor main two code chunks into functionsMatt Fleming
There is a whole load of generic EFI memory map code inside of the fake_mem driver which is better suited to being grouped with the rest of the generic EFI code for manipulating EFI memory maps. In preparation for that, this patch refactors the core code, so that it's possible to move entire functions later. Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Jones <pjones@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi: Add efi_memmap_init_late() for permanent EFI memmapMatt Fleming
Drivers need a way to access the EFI memory map at runtime. ARM and arm64 currently provide this by remapping the EFI memory map into the vmalloc space before setting up the EFI virtual mappings. x86 does not provide this functionality which has resulted in the code in efi_mem_desc_lookup() where it will manually map individual EFI memmap entries if the memmap has already been torn down on x86, /* * If a driver calls this after efi_free_boot_services, * ->map will be NULL, and the target may also not be mapped. * So just always get our own virtual map on the CPU. * */ md = early_memremap(p, sizeof (*md)); There isn't a good reason for not providing a permanent EFI memory map for runtime queries, especially since the EFI regions are not mapped into the standard kernel page tables. Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Jones <pjones@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi: Refactor efi_memmap_init_early() into arch-neutral codeMatt Fleming
Every EFI architecture apart from ia64 needs to setup the EFI memory map at efi.memmap, and the code for doing that is essentially the same across all implementations. Therefore, it makes sense to factor this out into the common code under drivers/firmware/efi/. The only slight variation is the data structure out of which we pull the initial memory map information, such as physical address, memory descriptor size and version, etc. We can address this by passing a generic data structure (struct efi_memory_map_data) as the argument to efi_memmap_init_early() which contains the minimum info required for initialising the memory map. In the process, this patch also fixes a few undesirable implementation differences: - ARM and arm64 were failing to clear the EFI_MEMMAP bit when unmapping the early EFI memory map. EFI_MEMMAP indicates whether the EFI memory map is mapped (not the regions contained within) and can be traversed. It's more correct to set the bit as soon as we memremap() the passed in EFI memmap. - Rename efi_unmmap_memmap() to efi_memmap_unmap() to adhere to the regular naming scheme. This patch also uses a read-write mapping for the memory map instead of the read-only mapping currently used on ARM and arm64. x86 needs the ability to update the memory map in-place when assigning virtual addresses to regions (efi_map_region()) and tagging regions when reserving boot services (efi_reserve_boot_services()). There's no way for the generic fake_mem code to know which mapping to use without introducing some arch-specific constant/hook, so just use read-write since read-only is of dubious value for the EFI memory map. Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Jones <pjones@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09x86/efi: Test for EFI_MEMMAP functionality when iterating EFI memmapMatt Fleming
Both efi_find_mirror() and efi_fake_memmap() really want to know whether the EFI memory map is available, not just whether the machine was booted using EFI. efi_fake_memmap() even has a check for EFI_MEMMAP at the start of the function. Since we've already got other code that has this dependency, merge everything under one if() conditional, and remove the now superfluous check from efi_fake_memmap(). Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-08pstore: Split pstore fragile flagsNamhyung Kim
This patch adds new PSTORE_FLAGS for each pstore type so that they can be enabled separately. This is a preparation for ongoing virtio-pstore work to support those types flexibly. The PSTORE_FLAGS_FRAGILE is changed to PSTORE_FLAGS_DMESG to preserve the original behavior. Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: linux-acpi@vger.kernel.org Cc: linux-efi@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> [kees: retained "FRAGILE" for now to make merges easier] Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-08Merge branch 'dmi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi fix from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: dmi-id: don't free dev structure after calling device_register
2016-09-08dmi-id: don't free dev structure after calling device_registerAllen Hung
dmi_dev is freed in error exit code but, according to the document of device_register, it should never directly free device structure after calling this function, even if it returned an error! Use put_device() instead. Signed-off-by: Allen Hung <allen_hung@dell.com> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2016-09-05dcdbas: Make use of smp_call_on_cpu()Juergen Gross
Use smp_call_on_cpu() to raise SMI on CPU 0. Make call secure by adding get_online_cpus() to avoid e.g. suspend resume cycles in between. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Douglas_Warzecha@dell.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akataria@vmware.com Cc: boris.ostrovsky@oracle.com Cc: chrisw@sous-sol.org Cc: david.vrabel@citrix.com Cc: hpa@zytor.com Cc: jdelvare@suse.com Cc: jeremy@goop.org Cc: linux@roeck-us.net Cc: pali.rohar@gmail.com Cc: rusty@rustcorp.com.au Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1472453327-19050-6-git-send-email-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-05efi/libstub: Use efi_exit_boot_services() in FDTJeffrey Hugo
The FDT code directly calls ExitBootServices. This is inadvisable as the UEFI spec details a complex set of errors, race conditions, and API interactions that the caller of ExitBootServices must get correct. The FDT code does not handle EFI_INVALID_PARAMETER as required by the spec, which causes intermittent boot failures on the Qualcomm Technologies QDF2432. Call the efi_exit_boot_services() helper intead, which handles the EFI_INVALID_PARAMETER scenario properly. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-05efi/libstub: Introduce ExitBootServices helperJeffrey Hugo
The spec allows ExitBootServices to fail with EFI_INVALID_PARAMETER if a race condition has occurred where the EFI has updated the memory map after the stub grabbed a reference to the map. The spec defines a retry proceedure with specific requirements to handle this scenario. This scenario was previously observed on x86 - commit d3768d885c6c ("x86, efi: retry ExitBootServices() on failure") but the current fix is not spec compliant and the scenario is now observed on the Qualcomm Technologies QDF2432 via the FDT stub which does not handle the error and thus causes boot failures. The user will notice the boot failure as the kernel is not executed and the system may drop back to a UEFI shell, but will be unresponsive to input and the system will require a power cycle to recover. Add a helper to the stub library that correctly adheres to the spec in the case of EFI_INVALID_PARAMETER from ExitBootServices and can be universally used across all stub implementations. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-05efi/libstub: Allocate headspace in efi_get_memory_map()Jeffrey Hugo
efi_get_memory_map() allocates a buffer to store the memory map that it retrieves. This buffer may need to be reused by the client after ExitBootServices() is called, at which point allocations are not longer permitted. To support this usecase, provide the allocated buffer size back to the client, and allocate some additional headroom to account for any reasonable growth in the map that is likely to happen between the call to efi_get_memory_map() and the client reusing the buffer. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-05efi: Fix handling error value in fdt_find_uefi_paramsAndrzej Hajda
of_get_flat_dt_subnode_by_name can return negative value in case of error. Assigning the result to unsigned variable and checking if the variable is lesser than zero is incorrect and always false. The patch fixes it by using signed variable to check the result. The problem has been detected using semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-01firmware: Amlogic: Add secure monitor driverCarlo Caione
Introduce a driver to provide calls into secure monitor mode. In the Amlogic SoCs these calls are used for multiple reasons: access to NVMEM, set USB boot, enable JTAG, etc... Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Carlo Caione <carlo@endlessm.com> [khilman: add in SZ_4K cleanup] Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-08-25Merge tag 'vexpress-fixes-4.8-rc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes SCPI/Vexpress fixes for v4.8-rc Couple of minor fixes to add missing of_node_put after calling of_parse_phandle in SCPI and vexpress-config bus drivers(Peter Chen) * tag 'vexpress-fixes-4.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scpi: add missing of_node_put after calling of_parse_phandle bus: vexpress-config: add missing of_node_put after calling of_parse_phandle Signed-off-by: Olof Johansson <olof@lixom.net>
2016-08-23firmware: qcom_scm: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/firmware/Kconfig:config QCOM_SCM drivers/firmware/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: linux-soc@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-11efi/capsule: Allocate whole capsule into virtual memoryAustin Christ
According to UEFI 2.6 section 7.5.3, the capsule should be in contiguous virtual memory and firmware may consume the capsule immediately. To correctly implement this functionality, the kernel driver needs to vmap the entire capsule at the time it is made available to firmware. The virtual allocation of the capsule update has been changed from kmap, which was only allocating the first page of the update, to vmap, and allocates the entire data payload. Signed-off-by: Austin Christ <austinwc@codeaurora.org> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Reviewed-by: Lee, Chun-Yi <jlee@suse.com> Cc: <stable@vger.kernel.org> # v4.7 Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kweh Hock Leong <hock.leong.kweh@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1470912120-22831-3-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-08firmware: arm_scpi: add missing of_node_put after calling of_parse_phandlePeter Chen
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using it. Besides, of_address_to_resource always returns -EINVAL for error, delete the assignment for ret. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-08-04tree-wide: replace config_enabled() with IS_ENABLED()Masahiro Yamada
The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-01Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...
2016-07-27Merge tag 'for-linus-4.8-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: "Features and fixes for 4.8-rc0: - ACPI support for guests on ARM platforms. - Generic steal time support for arm and x86. - Support cases where kernel cpu is not Xen VCPU number (e.g., if in-guest kexec is used). - Use the system workqueue instead of a custom workqueue in various places" * tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (47 commits) xen: add static initialization of steal_clock op to xen_time_ops xen/pvhvm: run xen_vcpu_setup() for the boot CPU xen/evtchn: use xen_vcpu_id mapping xen/events: fifo: use xen_vcpu_id mapping xen/events: use xen_vcpu_id mapping in events_base x86/xen: use xen_vcpu_id mapping when pointing vcpu_info to shared_info x86/xen: use xen_vcpu_id mapping for HYPERVISOR_vcpu_op xen: introduce xen_vcpu_id mapping x86/acpi: store ACPI ids from MADT for future usage x86/xen: update cpuid.h from Xen-4.7 xen/evtchn: add IOCTL_EVTCHN_RESTRICT xen-blkback: really don't leak mode property xen-blkback: constify instance of "struct attribute_group" xen-blkfront: prefer xenbus_scanf() over xenbus_gather() xen-blkback: prefer xenbus_scanf() over xenbus_gather() xen: support runqueue steal time on xen arm/xen: add support for vm_assist hypercall xen: update xen headers xen-pciback: drop superfluous variables xen-pciback: short-circuit read path used for merging write values ...
2016-07-26Merge tag 'pstore-v4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore subsystem updates from Kees Cook: "This expands the supported compressors, fixes some bugs, and finally adds DT bindings" * tag 'pstore-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: add Device Tree bindings efi-pstore: implement efivars_pstore_exit() pstore: drop file opened reference count pstore: add lzo/lz4 compression support pstore: Cleanup pstore_dump() pstore: Enable compression on normal path (again) ramoops: Only unregister when registered
2016-07-26Merge tag 'acpi-4.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "The new feaures here are the support for ACPI overlays (allowing ACPI tables to be loaded at any time from EFI variables or via configfs) and the LPI (Low-Power Idle) support. Also notable is the ACPI-based NUMA support for ARM64. Apart from that we have two new drivers, for the DPTF (Dynamic Power and Thermal Framework) power participant device and for the Intel Broxton WhiskeyCove PMIC, some more PMIC-related changes, support for the Boot Error Record Table (BERT) in APEI and support for platform-initiated graceful shutdown. Plus two new pieces of documentation and usual assorted fixes and cleanups in quite a few places. Specifics: - Support for ACPI SSDT overlays allowing Secondary System Description Tables (SSDTs) to be loaded at any time from EFI variables or via configfs (Octavian Purdila, Mika Westerberg). - Support for the ACPI LPI (Low-Power Idle) feature introduced in ACPI 6.0 and allowing processor idle states to be represented in ACPI tables in a hierarchical way (with the help of Processor Container objects) and support for ACPI idle states management on ARM64, based on LPI (Sudeep Holla). - General improvements of ACPI support for NUMA and ARM64 support for ACPI-based NUMA (Hanjun Guo, David Daney, Robert Richter). - General improvements of the ACPI table upgrade mechanism and ARM64 support for that feature (Aleksey Makarov, Jon Masters). - Support for the Boot Error Record Table (BERT) in APEI and improvements of kernel messages printed by the error injection code (Huang Ying, Borislav Petkov). - New driver for the Intel Broxton WhiskeyCove PMIC operation region and support for the REGS operation region on Broxton, PMIC code cleanups (Bin Gao, Felipe Balbi, Paul Gortmaker). - New driver for the power participant device which is part of the Dynamic Power and Thermal Framework (DPTF) and DPTF-related code reorganization (Srinivas Pandruvada). - Support for the platform-initiated graceful shutdown feature introduced in ACPI 6.1 (Prashanth Prakash). - ACPI button driver update related to lid input events generated automatically on initialization and system resume that have been problematic for some time (Lv Zheng). - ACPI EC driver cleanups (Lv Zheng). - Documentation of the ACPICA release automation process and the in-kernel ACPI AML debugger (Lv Zheng). - New blacklist entry and two fixes for the ACPI backlight driver (Alex Hung, Arvind Yadav, Ralf Gerbig). - Cleanups of the ACPI pci_slot driver (Joe Perches, Paul Gortmaker). - ACPI CPPC code changes to make it more robust against possible defects in ACPI tables and new symbol definitions for PCC (Hoan Tran). - System reboot code modification to execute the ACPI _PTS (Prepare To Sleep) method in addition to _TTS (Ocean He). - ACPICA-related change to carry out lock ordering checks in ACPICA if ACPICA debug is enabled in the kernel (Lv Zheng). - Assorted minor fixes and cleanups (Andy Shevchenko, Baoquan He, Bhaktipriya Shridhar, Paul Gortmaker, Rafael Wysocki)" * tag 'acpi-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits) ACPI: enable ACPI_PROCESSOR_IDLE on ARM64 arm64: add support for ACPI Low Power Idle(LPI) drivers: firmware: psci: initialise idle states using ACPI LPI cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64} arm64: cpuidle: drop __init section marker to arm_cpuidle_init ACPI / processor_idle: Add support for Low Power Idle(LPI) states ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE ACPI / DPTF: move int340x_thermal.c to the DPTF folder ACPI / DPTF: Add DPTF power participant driver ACPI / lpat: make it explicitly non-modular ACPI / dock: make dock explicitly non-modular ACPI / PCI: make pci_slot explicitly non-modular ACPI / PMIC: remove modular references from non-modular code ACPICA: Linux: Enable ACPI_MUTEX_DEBUG for Linux kernel ACPI: Rename configfs.c to acpi_configfs.c to prevent link error ACPI / debugger: Add AML debugger documentation ACPI: Add documentation describing ACPICA release automation ACPI: add support for loading SSDTs via configfs ACPI: add support for configfs efi / ACPI: load SSTDs from EFI variables ...
2016-07-25Merge tag 'v4.7' into for-linus/pstoreKees Cook
Linux 4.7
2016-07-25Merge branches 'acpi-processor', 'acpi-cppc', 'acpi-apei' and 'acpi-sleep'Rafael J. Wysocki
* acpi-processor: ACPI: enable ACPI_PROCESSOR_IDLE on ARM64 arm64: add support for ACPI Low Power Idle(LPI) drivers: firmware: psci: initialise idle states using ACPI LPI cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64} arm64: cpuidle: drop __init section marker to arm_cpuidle_init ACPI / processor_idle: Add support for Low Power Idle(LPI) states ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE * acpi-cppc: mailbox: pcc: Add PCC request and free channel declarations ACPI / CPPC: Prevent cpc_desc_ptr points to the invalid data ACPI: CPPC: Return error if _CPC is invalid on a CPU * acpi-apei: ACPI / APEI: Add Boot Error Record Table (BERT) support ACPI / einj: Make error paths more talkative ACPI / einj: Convert EINJ_PFX to proper pr_fmt * acpi-sleep: ACPI: Execute _PTS before system reboot